Modification du soft

Soft/STM32/Controle/Controle.ioc

@@ -58,7 +58,7 @@ Mcu.Pin30=PB6
 Mcu.Pin31=PB7
 Mcu.Pin32=PB8
 Mcu.Pin33=PB9
-Mcu.Pin34=VP_FREERTOS_VS_ENABLE
+Mcu.Pin34=VP_FREERTOS_VS_CMSIS_V1
 Mcu.Pin35=VP_SYS_VS_tim5
 Mcu.Pin36=VP_TIM1_VS_ControllerModeClock
 Mcu.Pin37=VP_TIM1_VS_ClockSourceITR
@@ -74,21 +74,22 @@ Mcu.PinsNb=40
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F401RCTx
-MxCube.Version=5.0.0
-MxDb.Version=DB.5.0.0
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
-NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:true
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
-NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:true
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:true
-NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true\:true
+MxCube.Version=5.1.0
+MxDb.Version=DB.5.0.10
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false
+NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true\:true\:false
 NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
-NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:true
-NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:false\:true\:true
-NVIC.TIM5_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.SPI1_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:true\:false
+NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:false\:true\:true\:true
+NVIC.TIM5_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
 NVIC.TimeBase=TIM5_IRQn
 NVIC.TimeBaseIP=TIM5
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false
 PA0-WKUP.GPIOParameters=GPIO_Label
 PA0-WKUP.GPIO_Label=aquit
 PA0-WKUP.Locked=true
@@ -116,13 +117,13 @@ PA3.GPIO_Label=S2
 PA3.Locked=true
 PA3.Signal=S_TIM2_CH4
 PA4.Locked=true
-PA4.Mode=NSS_Signal_Hard_Output
+PA4.Mode=NSS_Signal_Hard_Input
 PA4.Signal=SPI1_NSS
-PA5.Mode=Full_Duplex_Master
+PA5.Mode=Full_Duplex_Slave
 PA5.Signal=SPI1_SCK
-PA6.Mode=Full_Duplex_Master
+PA6.Mode=Full_Duplex_Slave
 PA6.Signal=SPI1_MISO
-PA7.Mode=Full_Duplex_Master
+PA7.Mode=Full_Duplex_Slave
 PA7.Signal=SPI1_MOSI
 PA8.Mode=I2C
 PA8.Signal=I2C3_SCL
@@ -210,12 +211,12 @@ ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32F401RCTx
-ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.22.0
+ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.24.0
 ProjectManager.FreePins=true
 ProjectManager.HalAssertFull=false
 ProjectManager.HeapSize=0x200
 ProjectManager.KeepUserCode=true
-ProjectManager.LastFirmware=false
+ProjectManager.LastFirmware=true
 ProjectManager.LibraryCopy=1
 ProjectManager.MainLocation=Src
 ProjectManager.NoMain=false
@@ -283,12 +284,11 @@ SH.S_TIM4_CH3.0=TIM4_CH3,PWM Generation3 CH3
 SH.S_TIM4_CH3.ConfNb=1
 SH.S_TIM4_CH4.0=TIM4_CH4,PWM Generation4 CH4
 SH.S_TIM4_CH4.ConfNb=1
-SPI1.CalculateBaudRate=42.0 MBits/s
 SPI1.Direction=SPI_DIRECTION_2LINES
-SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,VirtualNSS
-SPI1.Mode=SPI_MODE_MASTER
+SPI1.IPParameters=VirtualType,Mode,Direction,VirtualNSS
+SPI1.Mode=SPI_MODE_SLAVE
 SPI1.VirtualNSS=VM_NSSHARD
-SPI1.VirtualType=VM_MASTER
+SPI1.VirtualType=VM_SLAVE
 TIM1.Channel-Output\ Compare1\ CH1N=TIM_CHANNEL_1
 TIM1.IPParameters=Channel-Output Compare1 CH1N
 TIM2.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
@@ -313,8 +313,8 @@ TIM4.Period=31250-1
 TIM4.Prescaler=8-1
 TIM9.Channel-PWM\ Generation1\ No\ Output=TIM_CHANNEL_1
 TIM9.IPParameters=Channel-PWM Generation1 No Output
-VP_FREERTOS_VS_ENABLE.Mode=Enabled
-VP_FREERTOS_VS_ENABLE.Signal=FREERTOS_VS_ENABLE
+VP_FREERTOS_VS_CMSIS_V1.Mode=CMSIS_V1
+VP_FREERTOS_VS_CMSIS_V1.Signal=FREERTOS_VS_CMSIS_V1
 VP_SYS_VS_tim5.Mode=TIM5
 VP_SYS_VS_tim5.Signal=SYS_VS_tim5
 VP_TIM1_VS_ClockSourceITR.Mode=TriggerSource_ITR0

Soft/STM32/Controle/Controle.xml

@@ -1,16 +1,15 @@
 <?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE targetDefinitions [ 
-	<!ELEMENT targetDefinitions (board)>
-	<!ELEMENT board (name, dbgIF+, dbgDEV, mcuId)>
-	<!ELEMENT name (#PCDATA)>
-	<!ELEMENT dbgIF (#PCDATA)>
-	<!ELEMENT dbgDEV (#PCDATA)>
-	<!ELEMENT mcuId (#PCDATA)>
-	<!ATTLIST board id CDATA #REQUIRED>
+<!DOCTYPE targetDefinitions [
+<!ELEMENT targetDefinitions (board)>
+<!ELEMENT board (name,dbgIF+,dbgDEV,mcuId)>
+<!ELEMENT name (#PCDATA)>
+<!ELEMENT dbgIF (#PCDATA)>
+<!ELEMENT dbgDEV (#PCDATA)>
+<!ELEMENT mcuId (#PCDATA)>
+<!ATTLIST board id CDATA #REQUIRED>
 ]>
-
 <targetDefinitions>
-  <board id="controle">
+  <board id="Controle">
     <name>Controle</name>
     <dbgIF>SWD</dbgIF>
     <dbgDEV>ST-Link</dbgDEV>

Soft/STM32/Controle/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h

@@ -122,11 +122,11 @@
 #endif /* USE_HAL_DRIVER */
 
 /**
-  * @brief CMSIS version number V2.6.2
+  * @brief CMSIS version number V2.6.3
   */
 #define __STM32F4xx_CMSIS_VERSION_MAIN   (0x02U) /*!< [31:24] main version */
 #define __STM32F4xx_CMSIS_VERSION_SUB1   (0x06U) /*!< [23:16] sub1 version */
-#define __STM32F4xx_CMSIS_VERSION_SUB2   (0x02U) /*!< [15:8]  sub2 version */
+#define __STM32F4xx_CMSIS_VERSION_SUB2   (0x03U) /*!< [15:8]  sub2 version */
 #define __STM32F4xx_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
 #define __STM32F4xx_CMSIS_VERSION        ((__STM32F4xx_CMSIS_VERSION_MAIN << 24)\
                                          |(__STM32F4xx_CMSIS_VERSION_SUB1 << 16)\
@@ -211,10 +211,10 @@ typedef enum
 } FunctionalState;
 #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
 
-typedef enum 
+typedef enum
 {
-  ERROR = 0U, 
-  SUCCESS = !ERROR
+  SUCCESS = 0U,
+  ERROR = !SUCCESS
 } ErrorStatus;
 
 /**

Soft/STM32/Controle/Drivers/CMSIS/Include/arm_common_tables.h

@@ -1,136 +0,0 @@
-/* ----------------------------------------------------------------------
-* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
-*
-* $Date:        19. October 2015
-* $Revision: 	V.1.4.5 a
-*
-* Project: 	    CMSIS DSP Library
-* Title:	    arm_common_tables.h
-*
-* Description:	This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
-*
-* Target Processor: Cortex-M4/Cortex-M3
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-*   - Redistributions of source code must retain the above copyright
-*     notice, this list of conditions and the following disclaimer.
-*   - Redistributions in binary form must reproduce the above copyright
-*     notice, this list of conditions and the following disclaimer in
-*     the documentation and/or other materials provided with the
-*     distribution.
-*   - Neither the name of ARM LIMITED nor the names of its contributors
-*     may be used to endorse or promote products derived from this
-*     software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-* POSSIBILITY OF SUCH DAMAGE.
-* -------------------------------------------------------------------- */
-
-#ifndef _ARM_COMMON_TABLES_H
-#define _ARM_COMMON_TABLES_H
-
-#include "arm_math.h"
-
-extern const uint16_t armBitRevTable[1024];
-extern const q15_t armRecipTableQ15[64];
-extern const q31_t armRecipTableQ31[64];
-/* extern const q31_t realCoefAQ31[1024]; */
-/* extern const q31_t realCoefBQ31[1024]; */
-extern const float32_t twiddleCoef_16[32];
-extern const float32_t twiddleCoef_32[64];
-extern const float32_t twiddleCoef_64[128];
-extern const float32_t twiddleCoef_128[256];
-extern const float32_t twiddleCoef_256[512];
-extern const float32_t twiddleCoef_512[1024];
-extern const float32_t twiddleCoef_1024[2048];
-extern const float32_t twiddleCoef_2048[4096];
-extern const float32_t twiddleCoef_4096[8192];
-#define twiddleCoef twiddleCoef_4096
-extern const q31_t twiddleCoef_16_q31[24];
-extern const q31_t twiddleCoef_32_q31[48];
-extern const q31_t twiddleCoef_64_q31[96];
-extern const q31_t twiddleCoef_128_q31[192];
-extern const q31_t twiddleCoef_256_q31[384];
-extern const q31_t twiddleCoef_512_q31[768];
-extern const q31_t twiddleCoef_1024_q31[1536];
-extern const q31_t twiddleCoef_2048_q31[3072];
-extern const q31_t twiddleCoef_4096_q31[6144];
-extern const q15_t twiddleCoef_16_q15[24];
-extern const q15_t twiddleCoef_32_q15[48];
-extern const q15_t twiddleCoef_64_q15[96];
-extern const q15_t twiddleCoef_128_q15[192];
-extern const q15_t twiddleCoef_256_q15[384];
-extern const q15_t twiddleCoef_512_q15[768];
-extern const q15_t twiddleCoef_1024_q15[1536];
-extern const q15_t twiddleCoef_2048_q15[3072];
-extern const q15_t twiddleCoef_4096_q15[6144];
-extern const float32_t twiddleCoef_rfft_32[32];
-extern const float32_t twiddleCoef_rfft_64[64];
-extern const float32_t twiddleCoef_rfft_128[128];
-extern const float32_t twiddleCoef_rfft_256[256];
-extern const float32_t twiddleCoef_rfft_512[512];
-extern const float32_t twiddleCoef_rfft_1024[1024];
-extern const float32_t twiddleCoef_rfft_2048[2048];
-extern const float32_t twiddleCoef_rfft_4096[4096];
-
-
-/* floating-point bit reversal tables */
-#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20  )
-#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48  )
-#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56  )
-#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 )
-#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 )
-#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 )
-#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800)
-#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808)
-#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032)
-
-extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH];
-
-/* fixed-point bit reversal tables */
-#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12  )
-#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24  )
-#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56  )
-#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 )
-#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 )
-#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 )
-#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 )
-#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984)
-#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032)
-
-extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH];
-
-/* Tables for Fast Math Sine and Cosine */
-extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1];
-extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1];
-extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1];
-
-#endif /*  ARM_COMMON_TABLES_H */

Soft/STM32/Controle/Drivers/CMSIS/Include/arm_const_structs.h

@@ -1,79 +0,0 @@
-/* ----------------------------------------------------------------------
-* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
-*
-* $Date:        19. March 2015
-* $Revision: 	V.1.4.5
-*
-* Project: 	    CMSIS DSP Library
-* Title:	    arm_const_structs.h
-*
-* Description:	This file has constant structs that are initialized for
-*              user convenience.  For example, some can be given as
-*              arguments to the arm_cfft_f32() function.
-*
-* Target Processor: Cortex-M4/Cortex-M3
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-*   - Redistributions of source code must retain the above copyright
-*     notice, this list of conditions and the following disclaimer.
-*   - Redistributions in binary form must reproduce the above copyright
-*     notice, this list of conditions and the following disclaimer in
-*     the documentation and/or other materials provided with the
-*     distribution.
-*   - Neither the name of ARM LIMITED nor the names of its contributors
-*     may be used to endorse or promote products derived from this
-*     software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-* POSSIBILITY OF SUCH DAMAGE.
-* -------------------------------------------------------------------- */
-
-#ifndef _ARM_CONST_STRUCTS_H
-#define _ARM_CONST_STRUCTS_H
-
-#include "arm_math.h"
-#include "arm_common_tables.h"
-
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
-
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
-
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
-
-#endif

Soft/STM32/Controle/Drivers/CMSIS/Include/arm_math.h

@@ -1,5907 +0,0 @@
-/* ----------------------------------------------------------------------
- * Copyright (C) 2010-2015 ARM Limited. All rights reserved.
- *
- * $Date:        20. October 2015
- * $Revision:    V1.4.5 b
- *
- * Project:      CMSIS DSP Library
- * Title:        arm_math.h
- *
- * Description:  Public header file for CMSIS DSP Library
- *
- * Target Processor: Cortex-M7/Cortex-M4/Cortex-M3/Cortex-M0
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *   - Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   - Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   - Neither the name of ARM LIMITED nor the names of its contributors
- *     may be used to endorse or promote products derived from this
- *     software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- * -------------------------------------------------------------------- */
-
-/**
- \mainpage CMSIS DSP Software Library
- *
- * Introduction
- * ------------
- *
- * This user manual describes the CMSIS DSP software library,
- * a suite of common signal processing functions for use on Cortex-M processor based devices.
- *
- * The library is divided into a number of functions each covering a specific category:
- * - Basic math functions
- * - Fast math functions
- * - Complex math functions
- * - Filters
- * - Matrix functions
- * - Transforms
- * - Motor control functions
- * - Statistical functions
- * - Support functions
- * - Interpolation functions
- *
- * The library has separate functions for operating on 8-bit integers, 16-bit integers,
- * 32-bit integer and 32-bit floating-point values.
- *
- * Using the Library
- * ------------
- *
- * The library installer contains prebuilt versions of the libraries in the <code>Lib</code> folder.
- * - arm_cortexM7lfdp_math.lib (Little endian and Double Precision Floating Point Unit on Cortex-M7)
- * - arm_cortexM7bfdp_math.lib (Big endian and Double Precision Floating Point Unit on Cortex-M7)
- * - arm_cortexM7lfsp_math.lib (Little endian and Single Precision Floating Point Unit on Cortex-M7)
- * - arm_cortexM7bfsp_math.lib (Big endian and Single Precision Floating Point Unit on Cortex-M7)
- * - arm_cortexM7l_math.lib (Little endian on Cortex-M7)
- * - arm_cortexM7b_math.lib (Big endian on Cortex-M7)
- * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4)
- * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4)
- * - arm_cortexM4l_math.lib (Little endian on Cortex-M4)
- * - arm_cortexM4b_math.lib (Big endian on Cortex-M4)
- * - arm_cortexM3l_math.lib (Little endian on Cortex-M3)
- * - arm_cortexM3b_math.lib (Big endian on Cortex-M3)
- * - arm_cortexM0l_math.lib (Little endian on Cortex-M0 / CortexM0+)
- * - arm_cortexM0b_math.lib (Big endian on Cortex-M0 / CortexM0+)
- *
- * The library functions are declared in the public file <code>arm_math.h</code> which is placed in the <code>Include</code> folder.
- * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single
- * public header file <code> arm_math.h</code> for Cortex-M7/M4/M3/M0/M0+ with little endian and big endian. Same header file will be used for floating point unit(FPU) variants.
- * Define the appropriate pre processor MACRO ARM_MATH_CM7 or ARM_MATH_CM4 or  ARM_MATH_CM3 or
- * ARM_MATH_CM0 or ARM_MATH_CM0PLUS depending on the target processor in the application.
- *
- * Examples
- * --------
- *
- * The library ships with a number of examples which demonstrate how to use the library functions.
- *
- * Toolchain Support
- * ------------
- *
- * The library has been developed and tested with MDK-ARM version 5.14.0.0
- * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly.
- *
- * Building the Library
- * ------------
- *
- * The library installer contains a project file to re build libraries on MDK-ARM Tool chain in the <code>CMSIS\\DSP_Lib\\Source\\ARM</code> folder.
- * - arm_cortexM_math.uvprojx
- *
- *
- * The libraries can be built by opening the arm_cortexM_math.uvprojx project in MDK-ARM, selecting a specific target, and defining the optional pre processor MACROs detailed above.
- *
- * Pre-processor Macros
- * ------------
- *
- * Each library project have differant pre-processor macros.
- *
- * - UNALIGNED_SUPPORT_DISABLE:
- *
- * Define macro UNALIGNED_SUPPORT_DISABLE, If the silicon does not support unaligned memory access
- *
- * - ARM_MATH_BIG_ENDIAN:
- *
- * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets.
- *
- * - ARM_MATH_MATRIX_CHECK:
- *
- * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices
- *
- * - ARM_MATH_ROUNDING:
- *
- * Define macro ARM_MATH_ROUNDING for rounding on support functions
- *
- * - ARM_MATH_CMx:
- *
- * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target
- * and ARM_MATH_CM0 for building library on Cortex-M0 target, ARM_MATH_CM0PLUS for building library on Cortex-M0+ target, and
- * ARM_MATH_CM7 for building the library on cortex-M7.
- *
- * - __FPU_PRESENT:
- *
- * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries
- *
- * <hr>
- * CMSIS-DSP in ARM::CMSIS Pack
- * -----------------------------
- *
- * The following files relevant to CMSIS-DSP are present in the <b>ARM::CMSIS</b> Pack directories:
- * |File/Folder                   |Content                                                                 |
- * |------------------------------|------------------------------------------------------------------------|
- * |\b CMSIS\\Documentation\\DSP  | This documentation                                                     |
- * |\b CMSIS\\DSP_Lib             | Software license agreement (license.txt)                               |
- * |\b CMSIS\\DSP_Lib\\Examples   | Example projects demonstrating the usage of the library functions      |
- * |\b CMSIS\\DSP_Lib\\Source     | Source files for rebuilding the library                                |
- *
- * <hr>
- * Revision History of CMSIS-DSP
- * ------------
- * Please refer to \ref ChangeLog_pg.
- *
- * Copyright Notice
- * ------------
- *
- * Copyright (C) 2010-2015 ARM Limited. All rights reserved.
- */
-
-/**
- * @defgroup groupMath Basic Math Functions
- */
-
-/**
- * @defgroup groupFastMath Fast Math Functions
- * This set of functions provides a fast approximation to sine, cosine, and square root.
- * As compared to most of the other functions in the CMSIS math library, the fast math functions
- * operate on individual values and not arrays.
- * There are separate functions for Q15, Q31, and floating-point data.
- *
- */
-
-/**
- * @defgroup groupCmplxMath Complex Math Functions
- * This set of functions operates on complex data vectors.
- * The data in the complex arrays is stored in an interleaved fashion
- * (real, imag, real, imag, ...).
- * In the API functions, the number of samples in a complex array refers
- * to the number of complex values; the array contains twice this number of
- * real values.
- */
-
-/**
- * @defgroup groupFilters Filtering Functions
- */
-
-/**
- * @defgroup groupMatrix Matrix Functions
- *
- * This set of functions provides basic matrix math operations.
- * The functions operate on matrix data structures.  For example,
- * the type
- * definition for the floating-point matrix structure is shown
- * below:
- * <pre>
- *     typedef struct
- *     {
- *       uint16_t numRows;     // number of rows of the matrix.
- *       uint16_t numCols;     // number of columns of the matrix.
- *       float32_t *pData;     // points to the data of the matrix.
- *     } arm_matrix_instance_f32;
- * </pre>
- * There are similar definitions for Q15 and Q31 data types.
- *
- * The structure specifies the size of the matrix and then points to
- * an array of data.  The array is of size <code>numRows X numCols</code>
- * and the values are arranged in row order.  That is, the
- * matrix element (i, j) is stored at:
- * <pre>
- *     pData[i*numCols + j]
- * </pre>
- *
- * \par Init Functions
- * There is an associated initialization function for each type of matrix
- * data structure.
- * The initialization function sets the values of the internal structure fields.
- * Refer to the function <code>arm_mat_init_f32()</code>, <code>arm_mat_init_q31()</code>
- * and <code>arm_mat_init_q15()</code> for floating-point, Q31 and Q15 types,  respectively.
- *
- * \par
- * Use of the initialization function is optional. However, if initialization function is used
- * then the instance structure cannot be placed into a const data section.
- * To place the instance structure in a const data
- * section, manually initialize the data structure.  For example:
- * <pre>
- * <code>arm_matrix_instance_f32 S = {nRows, nColumns, pData};</code>
- * <code>arm_matrix_instance_q31 S = {nRows, nColumns, pData};</code>
- * <code>arm_matrix_instance_q15 S = {nRows, nColumns, pData};</code>
- * </pre>
- * where <code>nRows</code> specifies the number of rows, <code>nColumns</code>
- * specifies the number of columns, and <code>pData</code> points to the
- * data array.
- *
- * \par Size Checking
- * By default all of the matrix functions perform size checking on the input and
- * output matrices.  For example, the matrix addition function verifies that the
- * two input matrices and the output matrix all have the same number of rows and
- * columns.  If the size check fails the functions return:
- * <pre>
- *     ARM_MATH_SIZE_MISMATCH
- * </pre>
- * Otherwise the functions return
- * <pre>
- *     ARM_MATH_SUCCESS
- * </pre>
- * There is some overhead associated with this matrix size checking.
- * The matrix size checking is enabled via the \#define
- * <pre>
- *     ARM_MATH_MATRIX_CHECK
- * </pre>
- * within the library project settings.  By default this macro is defined
- * and size checking is enabled.  By changing the project settings and
- * undefining this macro size checking is eliminated and the functions
- * run a bit faster.  With size checking disabled the functions always
- * return <code>ARM_MATH_SUCCESS</code>.
- */
-
-/**
- * @defgroup groupTransforms Transform Functions
- */
-
-/**
- * @defgroup groupController Controller Functions
- */
-
-/**
- * @defgroup groupStats Statistics Functions
- */
-/**
- * @defgroup groupSupport Support Functions
- */
-
-/**
- * @defgroup groupInterpolation Interpolation Functions
- * These functions perform 1- and 2-dimensional interpolation of data.
- * Linear interpolation is used for 1-dimensional data and
- * bilinear interpolation is used for 2-dimensional data.
- */
-
-/**
- * @defgroup groupExamples Examples
- */
-#ifndef _ARM_MATH_H
-#define _ARM_MATH_H
-
-/* ignore some GCC warnings */
-#if defined ( __GNUC__ )
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wsign-conversion"
-#pragma GCC diagnostic ignored "-Wconversion"
-#pragma GCC diagnostic ignored "-Wunused-parameter"
-#endif
-
-#define __CMSIS_GENERIC         /* disable NVIC and Systick functions */
-
-#if defined(ARM_MATH_CM7)
-#include "core_cm7.h"
-#elif defined (ARM_MATH_CM4)
-#include "core_cm4.h"
-#elif defined (ARM_MATH_CM3)
-#include "core_cm3.h"
-#elif defined (ARM_MATH_CM0)
-#include "core_cm0.h"
-#define ARM_MATH_CM0_FAMILY
-#elif defined (ARM_MATH_CM0PLUS)
-#include "core_cm0plus.h"
-#define ARM_MATH_CM0_FAMILY
-#else
-#error "Define according the used Cortex core ARM_MATH_CM7, ARM_MATH_CM4, ARM_MATH_CM3, ARM_MATH_CM0PLUS or ARM_MATH_CM0"
-#endif
-
-#undef  __CMSIS_GENERIC         /* enable NVIC and Systick functions */
-#include "string.h"
-#include "math.h"
-#ifdef   __cplusplus
-extern "C"
-{
-#endif
-
-/**
- * @brief Macros required for reciprocal calculation in Normalized LMS
- */
-
-#define DELTA_Q31          (0x100)
-#define DELTA_Q15          0x5
-#define INDEX_MASK         0x0000003F
-#ifndef PI
-#define PI                 3.14159265358979f
-#endif
-
-/**
- * @brief Macros required for SINE and COSINE Fast math approximations
- */
-
-#define FAST_MATH_TABLE_SIZE  512
-#define FAST_MATH_Q31_SHIFT   (32 - 10)
-#define FAST_MATH_Q15_SHIFT   (16 - 10)
-#define CONTROLLER_Q31_SHIFT  (32 - 9)
-#define TABLE_SIZE  256
-#define TABLE_SPACING_Q31     0x400000
-#define TABLE_SPACING_Q15     0x80
-
-/**
- * @brief Macros required for SINE and COSINE Controller functions
- */
-/* 1.31(q31) Fixed value of 2/360 */
-/* -1 to +1 is divided into 360 values so total spacing is (2/360) */
-#define INPUT_SPACING         0xB60B61
-
-/**
- * @brief Macro for Unaligned Support
- */
-#ifndef UNALIGNED_SUPPORT_DISABLE
-#define ALIGN4
-#else
-#if defined  (__GNUC__)
-#define ALIGN4 __attribute__((aligned(4)))
-#else
-#define ALIGN4 __align(4)
-#endif
-#endif   /* #ifndef UNALIGNED_SUPPORT_DISABLE */
-
-/**
- * @brief Error status returned by some functions in the library.
- */
-
-typedef enum {
-	ARM_MATH_SUCCESS = 0, /**< No error */
-	ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */
-	ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */
-	ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */
-	ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */
-	ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */
-	ARM_MATH_TEST_FAILURE = -6 /**< Test Failed  */
-} arm_status;
-
-/**
- * @brief 8-bit fractional data type in 1.7 format.
- */
-typedef int8_t q7_t;
-
-/**
- * @brief 16-bit fractional data type in 1.15 format.
- */
-typedef int16_t q15_t;
-
-/**
- * @brief 32-bit fractional data type in 1.31 format.
- */
-typedef int32_t q31_t;
-
-/**
- * @brief 64-bit fractional data type in 1.63 format.
- */
-typedef int64_t q63_t;
-
-/**
- * @brief 32-bit floating-point type definition.
- */
-typedef float float32_t;
-
-/**
- * @brief 64-bit floating-point type definition.
- */
-typedef double float64_t;
-
-/**
- * @brief definition to read/write two 16 bit values.
- */
-#if defined __CC_ARM
-#define __SIMD32_TYPE int32_t __packed
-#define CMSIS_UNUSED __attribute__((unused))
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-#define __SIMD32_TYPE int32_t
-#define CMSIS_UNUSED __attribute__((unused))
-
-#elif defined __GNUC__
-#define __SIMD32_TYPE int32_t
-#define CMSIS_UNUSED __attribute__((unused))
-
-#elif defined __ICCARM__
-#define __SIMD32_TYPE int32_t __packed
-#define CMSIS_UNUSED
-
-#elif defined __CSMC__
-#define __SIMD32_TYPE int32_t
-#define CMSIS_UNUSED
-
-#elif defined __TASKING__
-#define __SIMD32_TYPE __unaligned int32_t
-#define CMSIS_UNUSED
-
-#else
-#error Unknown compiler
-#endif
-
-#define __SIMD32(addr)        (*(__SIMD32_TYPE **) & (addr))
-#define __SIMD32_CONST(addr)  ((__SIMD32_TYPE *)(addr))
-#define _SIMD32_OFFSET(addr)  (*(__SIMD32_TYPE *)  (addr))
-#define __SIMD64(addr)        (*(int64_t **) & (addr))
-
-#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
-/**
- * @brief definition to pack two 16 bit values.
- */
-#define __PKHBT(ARG1, ARG2, ARG3)      ( (((int32_t)(ARG1) <<  0) & (int32_t)0x0000FFFF) | \
-                                         (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000)  )
-#define __PKHTB(ARG1, ARG2, ARG3)      ( (((int32_t)(ARG1) <<  0) & (int32_t)0xFFFF0000) | \
-                                         (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF)  )
-
-#endif
-
-/**
- * @brief definition to pack four 8 bit values.
- */
-#ifndef ARM_MATH_BIG_ENDIAN
-
-#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) <<  0) & (int32_t)0x000000FF) | \
-                                (((int32_t)(v1) <<  8) & (int32_t)0x0000FF00) | \
-                                (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \
-                                (((int32_t)(v3) << 24) & (int32_t)0xFF000000)  )
-#else
-
-#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) <<  0) & (int32_t)0x000000FF) | \
-                                (((int32_t)(v2) <<  8) & (int32_t)0x0000FF00) | \
-                                (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \
-                                (((int32_t)(v0) << 24) & (int32_t)0xFF000000)  )
-
-#endif
-
-/**
- * @brief Clips Q63 to Q31 values.
- */
-static __INLINE q31_t clip_q63_to_q31(
-		q63_t x)
-{
-	return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
-	((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x;
-}
-
-/**
- * @brief Clips Q63 to Q15 values.
- */
-static __INLINE q15_t clip_q63_to_q15(
-		q63_t x)
-{
-	return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
-	((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15);
-}
-
-/**
- * @brief Clips Q31 to Q7 values.
- */
-static __INLINE q7_t clip_q31_to_q7(
-		q31_t x)
-{
-	return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ?
-	((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x;
-}
-
-/**
- * @brief Clips Q31 to Q15 values.
- */
-static __INLINE q15_t clip_q31_to_q15(
-		q31_t x)
-{
-	return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ?
-	((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x;
-}
-
-/**
- * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format.
- */
-
-static __INLINE q63_t mult32x64(
-		q63_t x,
-		q31_t y)
-{
-	return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) +
-			(((q63_t) (x >> 32) * y)));
-}
-
-/*
- #if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM   )
- #define __CLZ __clz
- #endif
- */
-/* note: function can be removed when all toolchain support __CLZ for Cortex-M0 */
-#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__))  )
-static __INLINE uint32_t __CLZ(
-		q31_t data);
-
-static __INLINE uint32_t __CLZ(
-		q31_t data)
-{
-	uint32_t count = 0;
-	uint32_t mask = 0x80000000;
-
-	while((data & mask) == 0)
-	{
-		count += 1u;
-		mask = mask >> 1u;
-	}
-
-	return (count);
-}
-#endif
-
-/**
- * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type.
- */
-
-static __INLINE uint32_t arm_recip_q31(
-		q31_t in,
-		q31_t * dst,
-		q31_t * pRecipTable)
-{
-	q31_t out;
-	uint32_t tempVal;
-	uint32_t index, i;
-	uint32_t signBits;
-
-	if(in > 0)
-	{
-		signBits = ((uint32_t) (__CLZ( in) - 1));
-	}
-	else
-	{
-		signBits = ((uint32_t) (__CLZ(-in) - 1));
-	}
-
-	/* Convert input sample to 1.31 format */
-	in = (in << signBits);
-
-	/* calculation of index for initial approximated Val */
-	index = (uint32_t)(in >> 24);
-	index = (index & INDEX_MASK);
-
-	/* 1.31 with exp 1 */
-	out = pRecipTable[index];
-
-	/* calculation of reciprocal value */
-	/* running approximation for two iterations */
-	for (i = 0u; i < 2u; i++)
-	{
-		tempVal = (uint32_t) (((q63_t) in * out) >> 31);
-		tempVal = 0x7FFFFFFFu - tempVal;
-		/*      1.31 with exp 1 */
-		/* out = (q31_t) (((q63_t) out * tempVal) >> 30); */
-		out = clip_q63_to_q31(((q63_t) out * tempVal) >> 30);
-	}
-
-	/* write output */
-	*dst = out;
-
-	/* return num of signbits of out = 1/in value */
-	return (signBits + 1u);
-}
-
-/**
- * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type.
- */
-static __INLINE uint32_t arm_recip_q15(
-		q15_t in,
-		q15_t * dst,
-		q15_t * pRecipTable)
-{
-	q15_t out = 0;
-	uint32_t tempVal = 0;
-	uint32_t index = 0, i = 0;
-	uint32_t signBits = 0;
-
-	if(in > 0)
-	{
-		signBits = ((uint32_t)(__CLZ( in) - 17));
-	}
-	else
-	{
-		signBits = ((uint32_t)(__CLZ(-in) - 17));
-	}
-
-	/* Convert input sample to 1.15 format */
-	in = (in << signBits);
-
-	/* calculation of index for initial approximated Val */
-	index = (uint32_t)(in >> 8);
-	index = (index & INDEX_MASK);
-
-	/*      1.15 with exp 1  */
-	out = pRecipTable[index];
-
-	/* calculation of reciprocal value */
-	/* running approximation for two iterations */
-	for (i = 0u; i < 2u; i++)
-	{
-		tempVal = (uint32_t) (((q31_t) in * out) >> 15);
-		tempVal = 0x7FFFu - tempVal;
-		/*      1.15 with exp 1 */
-		out = (q15_t) (((q31_t) out * tempVal) >> 14);
-		/* out = clip_q31_to_q15(((q31_t) out * tempVal) >> 14); */
-	}
-
-	/* write output */
-	*dst = out;
-
-	/* return num of signbits of out = 1/in value */
-	return (signBits + 1);
-}
-
-/*
- * @brief C custom defined intrinisic function for only M0 processors
- */
-#if defined(ARM_MATH_CM0_FAMILY)
-static __INLINE q31_t __SSAT(
-		q31_t x,
-		uint32_t y)
-{
-	int32_t posMax, negMin;
-	uint32_t i;
-
-	posMax = 1;
-	for (i = 0; i < (y - 1); i++)
-	{
-		posMax = posMax * 2;
-	}
-
-	if(x > 0)
-	{
-		posMax = (posMax - 1);
-
-		if(x > posMax)
-		{
-			x = posMax;
-		}
-	}
-	else
-	{
-		negMin = -posMax;
-
-		if(x < negMin)
-		{
-			x = negMin;
-		}
-	}
-	return (x);
-}
-#endif /* end of ARM_MATH_CM0_FAMILY */
-
-/*
- * @brief C custom defined intrinsic function for M3 and M0 processors
- */
-#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
-
-/*
- * @brief C custom defined QADD8 for M3 and M0 processors
- */
-static __INLINE uint32_t __QADD8(
-		uint32_t x,
-		uint32_t y)
-{
-	q31_t r, s, t, u;
-
-	r = __SSAT(((((q31_t)x << 24) >> 24) + (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF;
-	s = __SSAT(((((q31_t)x << 16) >> 24) + (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF;
-	t = __SSAT(((((q31_t)x << 8) >> 24) + (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF;
-	u = __SSAT(((((q31_t)x ) >> 24) + (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF;
-
-	return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r )));
-}
-
-/*
- * @brief C custom defined QSUB8 for M3 and M0 processors
- */
-static __INLINE uint32_t __QSUB8(
-		uint32_t x,
-		uint32_t y)
-{
-	q31_t r, s, t, u;
-
-	r = __SSAT(((((q31_t)x << 24) >> 24) - (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF;
-	s = __SSAT(((((q31_t)x << 16) >> 24) - (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF;
-	t = __SSAT(((((q31_t)x << 8) >> 24) - (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF;
-	u = __SSAT(((((q31_t)x ) >> 24) - (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF;
-
-	return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r )));
-}
-
-/*
- * @brief C custom defined QADD16 for M3 and M0 processors
- */
-static __INLINE uint32_t __QADD16(
-		uint32_t x,
-		uint32_t y)
-{
-	/*  q31_t r,     s;  without initialisation 'arm_offset_q15 test' fails  but 'intrinsic' tests pass! for armCC */
-	q31_t r = 0, s = 0;
-
-	r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
-	s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
-
-	return ((uint32_t)((s << 16) | (r )));
-}
-
-/*
- * @brief C custom defined SHADD16 for M3 and M0 processors
- */
-static __INLINE uint32_t __SHADD16(
-		uint32_t x,
-		uint32_t y)
-{
-	q31_t r, s;
-
-	r = (((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
-	s = (((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
-
-	return ((uint32_t)((s << 16) | (r )));
-}
-
-/*
- * @brief C custom defined QSUB16 for M3 and M0 processors
- */
-static __INLINE uint32_t __QSUB16(
-		uint32_t x,
-		uint32_t y)
-{
-	q31_t r, s;
-
-	r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
-	s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
-
-	return ((uint32_t)((s << 16) | (r )));
-}
-
-/*
- * @brief C custom defined SHSUB16 for M3 and M0 processors
- */
-static __INLINE uint32_t __SHSUB16(
-		uint32_t x,
-		uint32_t y)
-{
-	q31_t r, s;
-
-	r = (((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
-	s = (((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
-
-	return ((uint32_t)((s << 16) | (r )));
-}
-
-/*
- * @brief C custom defined QASX for M3 and M0 processors
- */
-static __INLINE uint32_t __QASX(
-		uint32_t x,
-		uint32_t y)
-{
-	q31_t r, s;
-
-	r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
-	s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
-
-	return ((uint32_t)((s << 16) | (r )));
-}
-
-/*
- * @brief C custom defined SHASX for M3 and M0 processors
- */
-static __INLINE uint32_t __SHASX(
-		uint32_t x,
-		uint32_t y)
-{
-	q31_t r, s;
-
-	r = (((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
-	s = (((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
-
-	return ((uint32_t)((s << 16) | (r )));
-}
-
-/*
- * @brief C custom defined QSAX for M3 and M0 processors
- */
-static __INLINE uint32_t __QSAX(
-		uint32_t x,
-		uint32_t y)
-{
-	q31_t r, s;
-
-	r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
-	s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
-
-	return ((uint32_t)((s << 16) | (r )));
-}
-
-/*
- * @brief C custom defined SHSAX for M3 and M0 processors
- */
-static __INLINE uint32_t __SHSAX(
-		uint32_t x,
-		uint32_t y)
-{
-	q31_t r, s;
-
-	r = (((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
-	s = (((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
-
-	return ((uint32_t)((s << 16) | (r )));
-}
-
-/*
- * @brief C custom defined SMUSDX for M3 and M0 processors
- */
-static __INLINE uint32_t __SMUSDX(
-		uint32_t x,
-		uint32_t y)
-{
-	return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) -
-					((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) ));
-}
-
-/*
- * @brief C custom defined SMUADX for M3 and M0 processors
- */
-static __INLINE uint32_t __SMUADX(
-		uint32_t x,
-		uint32_t y)
-{
-	return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
-					((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) ));
-}
-
-/*
- * @brief C custom defined QADD for M3 and M0 processors
- */
-static __INLINE int32_t __QADD(
-		int32_t x,
-		int32_t y)
-{
-	return ((int32_t)(clip_q63_to_q31((q63_t)x + (q31_t)y)));
-}
-
-/*
- * @brief C custom defined QSUB for M3 and M0 processors
- */
-static __INLINE int32_t __QSUB(
-		int32_t x,
-		int32_t y)
-{
-	return ((int32_t)(clip_q63_to_q31((q63_t)x - (q31_t)y)));
-}
-
-/*
- * @brief C custom defined SMLAD for M3 and M0 processors
- */
-static __INLINE uint32_t __SMLAD(
-		uint32_t x,
-		uint32_t y,
-		uint32_t sum)
-{
-	return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
-					((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) +
-					( ((q31_t)sum ) ) ));
-}
-
-/*
- * @brief C custom defined SMLADX for M3 and M0 processors
- */
-static __INLINE uint32_t __SMLADX(
-		uint32_t x,
-		uint32_t y,
-		uint32_t sum)
-{
-	return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
-					((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
-					( ((q31_t)sum ) ) ));
-}
-
-/*
- * @brief C custom defined SMLSDX for M3 and M0 processors
- */
-static __INLINE uint32_t __SMLSDX(
-		uint32_t x,
-		uint32_t y,
-		uint32_t sum)
-{
-	return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) -
-					((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
-					( ((q31_t)sum ) ) ));
-}
-
-/*
- * @brief C custom defined SMLALD for M3 and M0 processors
- */
-static __INLINE uint64_t __SMLALD(
-		uint32_t x,
-		uint32_t y,
-		uint64_t sum)
-{
-	/*  return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) + ((q15_t) x * (q15_t) y)); */
-	return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
-					((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) +
-					( ((q63_t)sum ) ) ));
-}
-
-/*
- * @brief C custom defined SMLALDX for M3 and M0 processors
- */
-static __INLINE uint64_t __SMLALDX(
-		uint32_t x,
-		uint32_t y,
-		uint64_t sum)
-{
-	/*  return (sum + ((q15_t) (x >> 16) * (q15_t) y)) + ((q15_t) x * (q15_t) (y >> 16)); */
-	return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
-					((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
-					( ((q63_t)sum ) ) ));
-}
-
-/*
- * @brief C custom defined SMUAD for M3 and M0 processors
- */
-static __INLINE uint32_t __SMUAD(
-		uint32_t x,
-		uint32_t y)
-{
-	return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
-					((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) ));
-}
-
-/*
- * @brief C custom defined SMUSD for M3 and M0 processors
- */
-static __INLINE uint32_t __SMUSD(
-		uint32_t x,
-		uint32_t y)
-{
-	return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) -
-					((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) ));
-}
-
-/*
- * @brief C custom defined SXTB16 for M3 and M0 processors
- */
-static __INLINE uint32_t __SXTB16(
-		uint32_t x)
-{
-	return ((uint32_t)(((((q31_t)x << 24) >> 24) & (q31_t)0x0000FFFF) |
-					((((q31_t)x << 8) >> 8) & (q31_t)0xFFFF0000) ));
-}
-
-#endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */
-
-/**
- * @brief Instance structure for the Q7 FIR filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< number of filter coefficients in the filter. */
-	q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-	q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
-} arm_fir_instance_q7;
-
-/**
- * @brief Instance structure for the Q15 FIR filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< number of filter coefficients in the filter. */
-	q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-	q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
-} arm_fir_instance_q15;
-
-/**
- * @brief Instance structure for the Q31 FIR filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< number of filter coefficients in the filter. */
-	q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-	q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
-} arm_fir_instance_q31;
-
-/**
- * @brief Instance structure for the floating-point FIR filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< number of filter coefficients in the filter. */
-	float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-	float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
-} arm_fir_instance_f32;
-
-/**
- * @brief Processing function for the Q7 FIR filter.
- * @param[in]  S          points to an instance of the Q7 FIR filter structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_fir_q7(const arm_fir_instance_q7 * S, q7_t * pSrc, q7_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the Q7 FIR filter.
- * @param[in,out] S          points to an instance of the Q7 FIR structure.
- * @param[in]     numTaps    Number of filter coefficients in the filter.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     blockSize  number of samples that are processed.
- */
-void arm_fir_init_q7(arm_fir_instance_q7 * S, uint16_t numTaps, q7_t * pCoeffs,
-		q7_t * pState, uint32_t blockSize);
-
-/**
- * @brief Processing function for the Q15 FIR filter.
- * @param[in]  S          points to an instance of the Q15 FIR structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_fir_q15(const arm_fir_instance_q15 * S, q15_t * pSrc, q15_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4.
- * @param[in]  S          points to an instance of the Q15 FIR filter structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_fir_fast_q15(const arm_fir_instance_q15 * S, q15_t * pSrc,
-		q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the Q15 FIR filter.
- * @param[in,out] S          points to an instance of the Q15 FIR filter structure.
- * @param[in]     numTaps    Number of filter coefficients in the filter. Must be even and greater than or equal to 4.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     blockSize  number of samples that are processed at a time.
- * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if
- * <code>numTaps</code> is not a supported value.
- */
-arm_status arm_fir_init_q15(arm_fir_instance_q15 * S, uint16_t numTaps,
-		q15_t * pCoeffs, q15_t * pState, uint32_t blockSize);
-
-/**
- * @brief Processing function for the Q31 FIR filter.
- * @param[in]  S          points to an instance of the Q31 FIR filter structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_fir_q31(const arm_fir_instance_q31 * S, q31_t * pSrc, q31_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4.
- * @param[in]  S          points to an instance of the Q31 FIR structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_fir_fast_q31(const arm_fir_instance_q31 * S, q31_t * pSrc,
-		q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the Q31 FIR filter.
- * @param[in,out] S          points to an instance of the Q31 FIR structure.
- * @param[in]     numTaps    Number of filter coefficients in the filter.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     blockSize  number of samples that are processed at a time.
- */
-void arm_fir_init_q31(arm_fir_instance_q31 * S, uint16_t numTaps,
-		q31_t * pCoeffs, q31_t * pState, uint32_t blockSize);
-
-/**
- * @brief Processing function for the floating-point FIR filter.
- * @param[in]  S          points to an instance of the floating-point FIR structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_fir_f32(const arm_fir_instance_f32 * S, float32_t * pSrc,
-		float32_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the floating-point FIR filter.
- * @param[in,out] S          points to an instance of the floating-point FIR filter structure.
- * @param[in]     numTaps    Number of filter coefficients in the filter.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     blockSize  number of samples that are processed at a time.
- */
-void arm_fir_init_f32(arm_fir_instance_f32 * S, uint16_t numTaps,
-		float32_t * pCoeffs, float32_t * pState, uint32_t blockSize);
-
-/**
- * @brief Instance structure for the Q15 Biquad cascade filter.
- */
-typedef struct {
-	int8_t numStages; /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
-	q15_t *pState; /**< Points to the array of state coefficients.  The array is of length 4*numStages. */
-	q15_t *pCoeffs; /**< Points to the array of coefficients.  The array is of length 5*numStages. */
-	int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
-} arm_biquad_casd_df1_inst_q15;
-
-/**
- * @brief Instance structure for the Q31 Biquad cascade filter.
- */
-typedef struct {
-	uint32_t numStages; /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
-	q31_t *pState; /**< Points to the array of state coefficients.  The array is of length 4*numStages. */
-	q31_t *pCoeffs; /**< Points to the array of coefficients.  The array is of length 5*numStages. */
-	uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
-} arm_biquad_casd_df1_inst_q31;
-
-/**
- * @brief Instance structure for the floating-point Biquad cascade filter.
- */
-typedef struct {
-	uint32_t numStages; /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
-	float32_t *pState; /**< Points to the array of state coefficients.  The array is of length 4*numStages. */
-	float32_t *pCoeffs; /**< Points to the array of coefficients.  The array is of length 5*numStages. */
-} arm_biquad_casd_df1_inst_f32;
-
-/**
- * @brief Processing function for the Q15 Biquad cascade filter.
- * @param[in]  S          points to an instance of the Q15 Biquad cascade structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_biquad_cascade_df1_q15(const arm_biquad_casd_df1_inst_q15 * S,
-		q15_t * pSrc, q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the Q15 Biquad cascade filter.
- * @param[in,out] S          points to an instance of the Q15 Biquad cascade structure.
- * @param[in]     numStages  number of 2nd order stages in the filter.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     postShift  Shift to be applied to the output. Varies according to the coefficients format
- */
-void arm_biquad_cascade_df1_init_q15(arm_biquad_casd_df1_inst_q15 * S,
-		uint8_t numStages, q15_t * pCoeffs, q15_t * pState, int8_t postShift);
-
-/**
- * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4.
- * @param[in]  S          points to an instance of the Q15 Biquad cascade structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_biquad_cascade_df1_fast_q15(const arm_biquad_casd_df1_inst_q15 * S,
-		q15_t * pSrc, q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Processing function for the Q31 Biquad cascade filter
- * @param[in]  S          points to an instance of the Q31 Biquad cascade structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_biquad_cascade_df1_q31(const arm_biquad_casd_df1_inst_q31 * S,
-		q31_t * pSrc, q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4.
- * @param[in]  S          points to an instance of the Q31 Biquad cascade structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_biquad_cascade_df1_fast_q31(const arm_biquad_casd_df1_inst_q31 * S,
-		q31_t * pSrc, q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the Q31 Biquad cascade filter.
- * @param[in,out] S          points to an instance of the Q31 Biquad cascade structure.
- * @param[in]     numStages  number of 2nd order stages in the filter.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     postShift  Shift to be applied to the output. Varies according to the coefficients format
- */
-void arm_biquad_cascade_df1_init_q31(arm_biquad_casd_df1_inst_q31 * S,
-		uint8_t numStages, q31_t * pCoeffs, q31_t * pState, int8_t postShift);
-
-/**
- * @brief Processing function for the floating-point Biquad cascade filter.
- * @param[in]  S          points to an instance of the floating-point Biquad cascade structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_biquad_cascade_df1_f32(const arm_biquad_casd_df1_inst_f32 * S,
-		float32_t * pSrc, float32_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the floating-point Biquad cascade filter.
- * @param[in,out] S          points to an instance of the floating-point Biquad cascade structure.
- * @param[in]     numStages  number of 2nd order stages in the filter.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- */
-void arm_biquad_cascade_df1_init_f32(arm_biquad_casd_df1_inst_f32 * S,
-		uint8_t numStages, float32_t * pCoeffs, float32_t * pState);
-
-/**
- * @brief Instance structure for the floating-point matrix structure.
- */
-typedef struct {
-	uint16_t numRows; /**< number of rows of the matrix.     */
-	uint16_t numCols; /**< number of columns of the matrix.  */
-	float32_t *pData; /**< points to the data of the matrix. */
-} arm_matrix_instance_f32;
-
-/**
- * @brief Instance structure for the floating-point matrix structure.
- */
-typedef struct {
-	uint16_t numRows; /**< number of rows of the matrix.     */
-	uint16_t numCols; /**< number of columns of the matrix.  */
-	float64_t *pData; /**< points to the data of the matrix. */
-} arm_matrix_instance_f64;
-
-/**
- * @brief Instance structure for the Q15 matrix structure.
- */
-typedef struct {
-	uint16_t numRows; /**< number of rows of the matrix.     */
-	uint16_t numCols; /**< number of columns of the matrix.  */
-	q15_t *pData; /**< points to the data of the matrix. */
-} arm_matrix_instance_q15;
-
-/**
- * @brief Instance structure for the Q31 matrix structure.
- */
-typedef struct {
-	uint16_t numRows; /**< number of rows of the matrix.     */
-	uint16_t numCols; /**< number of columns of the matrix.  */
-	q31_t *pData; /**< points to the data of the matrix. */
-} arm_matrix_instance_q31;
-
-/**
- * @brief Floating-point matrix addition.
- * @param[in]  pSrcA  points to the first input matrix structure
- * @param[in]  pSrcB  points to the second input matrix structure
- * @param[out] pDst   points to output matrix structure
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_add_f32(const arm_matrix_instance_f32 * pSrcA,
-		const arm_matrix_instance_f32 * pSrcB, arm_matrix_instance_f32 * pDst);
-
-/**
- * @brief Q15 matrix addition.
- * @param[in]   pSrcA  points to the first input matrix structure
- * @param[in]   pSrcB  points to the second input matrix structure
- * @param[out]  pDst   points to output matrix structure
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_add_q15(const arm_matrix_instance_q15 * pSrcA,
-		const arm_matrix_instance_q15 * pSrcB, arm_matrix_instance_q15 * pDst);
-
-/**
- * @brief Q31 matrix addition.
- * @param[in]  pSrcA  points to the first input matrix structure
- * @param[in]  pSrcB  points to the second input matrix structure
- * @param[out] pDst   points to output matrix structure
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_add_q31(const arm_matrix_instance_q31 * pSrcA,
-		const arm_matrix_instance_q31 * pSrcB, arm_matrix_instance_q31 * pDst);
-
-/**
- * @brief Floating-point, complex, matrix multiplication.
- * @param[in]  pSrcA  points to the first input matrix structure
- * @param[in]  pSrcB  points to the second input matrix structure
- * @param[out] pDst   points to output matrix structure
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_cmplx_mult_f32(const arm_matrix_instance_f32 * pSrcA,
-		const arm_matrix_instance_f32 * pSrcB, arm_matrix_instance_f32 * pDst);
-
-/**
- * @brief Q15, complex,  matrix multiplication.
- * @param[in]  pSrcA  points to the first input matrix structure
- * @param[in]  pSrcB  points to the second input matrix structure
- * @param[out] pDst   points to output matrix structure
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_cmplx_mult_q15(const arm_matrix_instance_q15 * pSrcA,
-		const arm_matrix_instance_q15 * pSrcB, arm_matrix_instance_q15 * pDst,
-		q15_t * pScratch);
-
-/**
- * @brief Q31, complex, matrix multiplication.
- * @param[in]  pSrcA  points to the first input matrix structure
- * @param[in]  pSrcB  points to the second input matrix structure
- * @param[out] pDst   points to output matrix structure
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_cmplx_mult_q31(const arm_matrix_instance_q31 * pSrcA,
-		const arm_matrix_instance_q31 * pSrcB, arm_matrix_instance_q31 * pDst);
-
-/**
- * @brief Floating-point matrix transpose.
- * @param[in]  pSrc  points to the input matrix
- * @param[out] pDst  points to the output matrix
- * @return    The function returns either  <code>ARM_MATH_SIZE_MISMATCH</code>
- * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_trans_f32(const arm_matrix_instance_f32 * pSrc,
-		arm_matrix_instance_f32 * pDst);
-
-/**
- * @brief Q15 matrix transpose.
- * @param[in]  pSrc  points to the input matrix
- * @param[out] pDst  points to the output matrix
- * @return    The function returns either  <code>ARM_MATH_SIZE_MISMATCH</code>
- * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_trans_q15(const arm_matrix_instance_q15 * pSrc,
-		arm_matrix_instance_q15 * pDst);
-
-/**
- * @brief Q31 matrix transpose.
- * @param[in]  pSrc  points to the input matrix
- * @param[out] pDst  points to the output matrix
- * @return    The function returns either  <code>ARM_MATH_SIZE_MISMATCH</code>
- * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_trans_q31(const arm_matrix_instance_q31 * pSrc,
-		arm_matrix_instance_q31 * pDst);
-
-/**
- * @brief Floating-point matrix multiplication
- * @param[in]  pSrcA  points to the first input matrix structure
- * @param[in]  pSrcB  points to the second input matrix structure
- * @param[out] pDst   points to output matrix structure
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_mult_f32(const arm_matrix_instance_f32 * pSrcA,
-		const arm_matrix_instance_f32 * pSrcB, arm_matrix_instance_f32 * pDst);
-
-/**
- * @brief Q15 matrix multiplication
- * @param[in]  pSrcA   points to the first input matrix structure
- * @param[in]  pSrcB   points to the second input matrix structure
- * @param[out] pDst    points to output matrix structure
- * @param[in]  pState  points to the array for storing intermediate results
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_mult_q15(const arm_matrix_instance_q15 * pSrcA,
-		const arm_matrix_instance_q15 * pSrcB, arm_matrix_instance_q15 * pDst,
-		q15_t * pState);
-
-/**
- * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
- * @param[in]  pSrcA   points to the first input matrix structure
- * @param[in]  pSrcB   points to the second input matrix structure
- * @param[out] pDst    points to output matrix structure
- * @param[in]  pState  points to the array for storing intermediate results
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_mult_fast_q15(const arm_matrix_instance_q15 * pSrcA,
-		const arm_matrix_instance_q15 * pSrcB, arm_matrix_instance_q15 * pDst,
-		q15_t * pState);
-
-/**
- * @brief Q31 matrix multiplication
- * @param[in]  pSrcA  points to the first input matrix structure
- * @param[in]  pSrcB  points to the second input matrix structure
- * @param[out] pDst   points to output matrix structure
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_mult_q31(const arm_matrix_instance_q31 * pSrcA,
-		const arm_matrix_instance_q31 * pSrcB, arm_matrix_instance_q31 * pDst);
-
-/**
- * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
- * @param[in]  pSrcA  points to the first input matrix structure
- * @param[in]  pSrcB  points to the second input matrix structure
- * @param[out] pDst   points to output matrix structure
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_mult_fast_q31(const arm_matrix_instance_q31 * pSrcA,
-		const arm_matrix_instance_q31 * pSrcB, arm_matrix_instance_q31 * pDst);
-
-/**
- * @brief Floating-point matrix subtraction
- * @param[in]  pSrcA  points to the first input matrix structure
- * @param[in]  pSrcB  points to the second input matrix structure
- * @param[out] pDst   points to output matrix structure
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_sub_f32(const arm_matrix_instance_f32 * pSrcA,
-		const arm_matrix_instance_f32 * pSrcB, arm_matrix_instance_f32 * pDst);
-
-/**
- * @brief Q15 matrix subtraction
- * @param[in]  pSrcA  points to the first input matrix structure
- * @param[in]  pSrcB  points to the second input matrix structure
- * @param[out] pDst   points to output matrix structure
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_sub_q15(const arm_matrix_instance_q15 * pSrcA,
-		const arm_matrix_instance_q15 * pSrcB, arm_matrix_instance_q15 * pDst);
-
-/**
- * @brief Q31 matrix subtraction
- * @param[in]  pSrcA  points to the first input matrix structure
- * @param[in]  pSrcB  points to the second input matrix structure
- * @param[out] pDst   points to output matrix structure
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_sub_q31(const arm_matrix_instance_q31 * pSrcA,
-		const arm_matrix_instance_q31 * pSrcB, arm_matrix_instance_q31 * pDst);
-
-/**
- * @brief Floating-point matrix scaling.
- * @param[in]  pSrc   points to the input matrix
- * @param[in]  scale  scale factor
- * @param[out] pDst   points to the output matrix
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_scale_f32(const arm_matrix_instance_f32 * pSrc,
-		float32_t scale, arm_matrix_instance_f32 * pDst);
-
-/**
- * @brief Q15 matrix scaling.
- * @param[in]  pSrc        points to input matrix
- * @param[in]  scaleFract  fractional portion of the scale factor
- * @param[in]  shift       number of bits to shift the result by
- * @param[out] pDst        points to output matrix
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_scale_q15(const arm_matrix_instance_q15 * pSrc,
-		q15_t scaleFract, int32_t shift, arm_matrix_instance_q15 * pDst);
-
-/**
- * @brief Q31 matrix scaling.
- * @param[in]  pSrc        points to input matrix
- * @param[in]  scaleFract  fractional portion of the scale factor
- * @param[in]  shift       number of bits to shift the result by
- * @param[out] pDst        points to output matrix structure
- * @return     The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
-arm_status arm_mat_scale_q31(const arm_matrix_instance_q31 * pSrc,
-		q31_t scaleFract, int32_t shift, arm_matrix_instance_q31 * pDst);
-
-/**
- * @brief  Q31 matrix initialization.
- * @param[in,out] S         points to an instance of the floating-point matrix structure.
- * @param[in]     nRows     number of rows in the matrix.
- * @param[in]     nColumns  number of columns in the matrix.
- * @param[in]     pData     points to the matrix data array.
- */
-void arm_mat_init_q31(arm_matrix_instance_q31 * S, uint16_t nRows,
-		uint16_t nColumns, q31_t * pData);
-
-/**
- * @brief  Q15 matrix initialization.
- * @param[in,out] S         points to an instance of the floating-point matrix structure.
- * @param[in]     nRows     number of rows in the matrix.
- * @param[in]     nColumns  number of columns in the matrix.
- * @param[in]     pData     points to the matrix data array.
- */
-void arm_mat_init_q15(arm_matrix_instance_q15 * S, uint16_t nRows,
-		uint16_t nColumns, q15_t * pData);
-
-/**
- * @brief  Floating-point matrix initialization.
- * @param[in,out] S         points to an instance of the floating-point matrix structure.
- * @param[in]     nRows     number of rows in the matrix.
- * @param[in]     nColumns  number of columns in the matrix.
- * @param[in]     pData     points to the matrix data array.
- */
-void arm_mat_init_f32(arm_matrix_instance_f32 * S, uint16_t nRows,
-		uint16_t nColumns, float32_t * pData);
-
-/**
- * @brief Instance structure for the Q15 PID Control.
- */
-typedef struct {
-	q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
-#ifdef ARM_MATH_CM0_FAMILY
-	q15_t A1;
-	q15_t A2;
-#else
-	q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/
-#endif
-	q15_t state[3]; /**< The state array of length 3. */
-	q15_t Kp; /**< The proportional gain. */
-	q15_t Ki; /**< The integral gain. */
-	q15_t Kd; /**< The derivative gain. */
-} arm_pid_instance_q15;
-
-/**
- * @brief Instance structure for the Q31 PID Control.
- */
-typedef struct {
-	q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
-	q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
-	q31_t A2; /**< The derived gain, A2 = Kd . */
-	q31_t state[3]; /**< The state array of length 3. */
-	q31_t Kp; /**< The proportional gain. */
-	q31_t Ki; /**< The integral gain. */
-	q31_t Kd; /**< The derivative gain. */
-} arm_pid_instance_q31;
-
-/**
- * @brief Instance structure for the floating-point PID Control.
- */
-typedef struct {
-	float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
-	float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
-	float32_t A2; /**< The derived gain, A2 = Kd . */
-	float32_t state[3]; /**< The state array of length 3. */
-	float32_t Kp; /**< The proportional gain. */
-	float32_t Ki; /**< The integral gain. */
-	float32_t Kd; /**< The derivative gain. */
-} arm_pid_instance_f32;
-
-/**
- * @brief  Initialization function for the floating-point PID Control.
- * @param[in,out] S               points to an instance of the PID structure.
- * @param[in]     resetStateFlag  flag to reset the state. 0 = no change in state 1 = reset the state.
- */
-void arm_pid_init_f32(arm_pid_instance_f32 * S, int32_t resetStateFlag);
-
-/**
- * @brief  Reset function for the floating-point PID Control.
- * @param[in,out] S  is an instance of the floating-point PID Control structure
- */
-void arm_pid_reset_f32(arm_pid_instance_f32 * S);
-
-/**
- * @brief  Initialization function for the Q31 PID Control.
- * @param[in,out] S               points to an instance of the Q15 PID structure.
- * @param[in]     resetStateFlag  flag to reset the state. 0 = no change in state 1 = reset the state.
- */
-void arm_pid_init_q31(arm_pid_instance_q31 * S, int32_t resetStateFlag);
-
-/**
- * @brief  Reset function for the Q31 PID Control.
- * @param[in,out] S   points to an instance of the Q31 PID Control structure
- */
-
-void arm_pid_reset_q31(arm_pid_instance_q31 * S);
-
-/**
- * @brief  Initialization function for the Q15 PID Control.
- * @param[in,out] S               points to an instance of the Q15 PID structure.
- * @param[in]     resetStateFlag  flag to reset the state. 0 = no change in state 1 = reset the state.
- */
-void arm_pid_init_q15(arm_pid_instance_q15 * S, int32_t resetStateFlag);
-
-/**
- * @brief  Reset function for the Q15 PID Control.
- * @param[in,out] S  points to an instance of the q15 PID Control structure
- */
-void arm_pid_reset_q15(arm_pid_instance_q15 * S);
-
-/**
- * @brief Instance structure for the floating-point Linear Interpolate function.
- */
-typedef struct {
-	uint32_t nValues; /**< nValues */
-	float32_t x1; /**< x1 */
-	float32_t xSpacing; /**< xSpacing */
-	float32_t *pYData; /**< pointer to the table of Y values */
-} arm_linear_interp_instance_f32;
-
-/**
- * @brief Instance structure for the floating-point bilinear interpolation function.
- */
-typedef struct {
-	uint16_t numRows; /**< number of rows in the data table. */
-	uint16_t numCols; /**< number of columns in the data table. */
-	float32_t *pData; /**< points to the data table. */
-} arm_bilinear_interp_instance_f32;
-
-/**
- * @brief Instance structure for the Q31 bilinear interpolation function.
- */
-typedef struct {
-	uint16_t numRows; /**< number of rows in the data table. */
-	uint16_t numCols; /**< number of columns in the data table. */
-	q31_t *pData; /**< points to the data table. */
-} arm_bilinear_interp_instance_q31;
-
-/**
- * @brief Instance structure for the Q15 bilinear interpolation function.
- */
-typedef struct {
-	uint16_t numRows; /**< number of rows in the data table. */
-	uint16_t numCols; /**< number of columns in the data table. */
-	q15_t *pData; /**< points to the data table. */
-} arm_bilinear_interp_instance_q15;
-
-/**
- * @brief Instance structure for the Q15 bilinear interpolation function.
- */
-typedef struct {
-	uint16_t numRows; /**< number of rows in the data table. */
-	uint16_t numCols; /**< number of columns in the data table. */
-	q7_t *pData; /**< points to the data table. */
-} arm_bilinear_interp_instance_q7;
-
-/**
- * @brief Q7 vector multiplication.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_mult_q7(q7_t * pSrcA, q7_t * pSrcB, q7_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Q15 vector multiplication.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_mult_q15(q15_t * pSrcA, q15_t * pSrcB, q15_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief Q31 vector multiplication.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_mult_q31(q31_t * pSrcA, q31_t * pSrcB, q31_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief Floating-point vector multiplication.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_mult_f32(float32_t * pSrcA, float32_t * pSrcB, float32_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief Instance structure for the Q15 CFFT/CIFFT function.
- */
-typedef struct {
-	uint16_t fftLen; /**< length of the FFT. */
-	uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
-	uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
-	q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */
-	uint16_t *pBitRevTable; /**< points to the bit reversal table. */
-	uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
-	uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
-} arm_cfft_radix2_instance_q15;
-
-/* Deprecated */
-arm_status arm_cfft_radix2_init_q15(arm_cfft_radix2_instance_q15 * S,
-		uint16_t fftLen, uint8_t ifftFlag, uint8_t bitReverseFlag);
-
-/* Deprecated */
-void arm_cfft_radix2_q15(const arm_cfft_radix2_instance_q15 * S, q15_t * pSrc);
-
-/**
- * @brief Instance structure for the Q15 CFFT/CIFFT function.
- */
-typedef struct {
-	uint16_t fftLen; /**< length of the FFT. */
-	uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
-	uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
-	q15_t *pTwiddle; /**< points to the twiddle factor table. */
-	uint16_t *pBitRevTable; /**< points to the bit reversal table. */
-	uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
-	uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
-} arm_cfft_radix4_instance_q15;
-
-/* Deprecated */
-arm_status arm_cfft_radix4_init_q15(arm_cfft_radix4_instance_q15 * S,
-		uint16_t fftLen, uint8_t ifftFlag, uint8_t bitReverseFlag);
-
-/* Deprecated */
-void arm_cfft_radix4_q15(const arm_cfft_radix4_instance_q15 * S, q15_t * pSrc);
-
-/**
- * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function.
- */
-typedef struct {
-	uint16_t fftLen; /**< length of the FFT. */
-	uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
-	uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
-	q31_t *pTwiddle; /**< points to the Twiddle factor table. */
-	uint16_t *pBitRevTable; /**< points to the bit reversal table. */
-	uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
-	uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
-} arm_cfft_radix2_instance_q31;
-
-/* Deprecated */
-arm_status arm_cfft_radix2_init_q31(arm_cfft_radix2_instance_q31 * S,
-		uint16_t fftLen, uint8_t ifftFlag, uint8_t bitReverseFlag);
-
-/* Deprecated */
-void arm_cfft_radix2_q31(const arm_cfft_radix2_instance_q31 * S, q31_t * pSrc);
-
-/**
- * @brief Instance structure for the Q31 CFFT/CIFFT function.
- */
-typedef struct {
-	uint16_t fftLen; /**< length of the FFT. */
-	uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
-	uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
-	q31_t *pTwiddle; /**< points to the twiddle factor table. */
-	uint16_t *pBitRevTable; /**< points to the bit reversal table. */
-	uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
-	uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
-} arm_cfft_radix4_instance_q31;
-
-/* Deprecated */
-void arm_cfft_radix4_q31(const arm_cfft_radix4_instance_q31 * S, q31_t * pSrc);
-
-/* Deprecated */
-arm_status arm_cfft_radix4_init_q31(arm_cfft_radix4_instance_q31 * S,
-		uint16_t fftLen, uint8_t ifftFlag, uint8_t bitReverseFlag);
-
-/**
- * @brief Instance structure for the floating-point CFFT/CIFFT function.
- */
-typedef struct {
-	uint16_t fftLen; /**< length of the FFT. */
-	uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
-	uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
-	float32_t *pTwiddle; /**< points to the Twiddle factor table. */
-	uint16_t *pBitRevTable; /**< points to the bit reversal table. */
-	uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
-	uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
-	float32_t onebyfftLen; /**< value of 1/fftLen. */
-} arm_cfft_radix2_instance_f32;
-
-/* Deprecated */
-arm_status arm_cfft_radix2_init_f32(arm_cfft_radix2_instance_f32 * S,
-		uint16_t fftLen, uint8_t ifftFlag, uint8_t bitReverseFlag);
-
-/* Deprecated */
-void arm_cfft_radix2_f32(const arm_cfft_radix2_instance_f32 * S,
-		float32_t * pSrc);
-
-/**
- * @brief Instance structure for the floating-point CFFT/CIFFT function.
- */
-typedef struct {
-	uint16_t fftLen; /**< length of the FFT. */
-	uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
-	uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
-	float32_t *pTwiddle; /**< points to the Twiddle factor table. */
-	uint16_t *pBitRevTable; /**< points to the bit reversal table. */
-	uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
-	uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
-	float32_t onebyfftLen; /**< value of 1/fftLen. */
-} arm_cfft_radix4_instance_f32;
-
-/* Deprecated */
-arm_status arm_cfft_radix4_init_f32(arm_cfft_radix4_instance_f32 * S,
-		uint16_t fftLen, uint8_t ifftFlag, uint8_t bitReverseFlag);
-
-/* Deprecated */
-void arm_cfft_radix4_f32(const arm_cfft_radix4_instance_f32 * S,
-		float32_t * pSrc);
-
-/**
- * @brief Instance structure for the fixed-point CFFT/CIFFT function.
- */
-typedef struct {
-	uint16_t fftLen; /**< length of the FFT. */
-	const q15_t *pTwiddle; /**< points to the Twiddle factor table. */
-	const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
-	uint16_t bitRevLength; /**< bit reversal table length. */
-} arm_cfft_instance_q15;
-
-void arm_cfft_q15(const arm_cfft_instance_q15 * S, q15_t * p1, uint8_t ifftFlag,
-		uint8_t bitReverseFlag);
-
-/**
- * @brief Instance structure for the fixed-point CFFT/CIFFT function.
- */
-typedef struct {
-	uint16_t fftLen; /**< length of the FFT. */
-	const q31_t *pTwiddle; /**< points to the Twiddle factor table. */
-	const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
-	uint16_t bitRevLength; /**< bit reversal table length. */
-} arm_cfft_instance_q31;
-
-void arm_cfft_q31(const arm_cfft_instance_q31 * S, q31_t * p1, uint8_t ifftFlag,
-		uint8_t bitReverseFlag);
-
-/**
- * @brief Instance structure for the floating-point CFFT/CIFFT function.
- */
-typedef struct {
-	uint16_t fftLen; /**< length of the FFT. */
-	const float32_t *pTwiddle; /**< points to the Twiddle factor table. */
-	const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
-	uint16_t bitRevLength; /**< bit reversal table length. */
-} arm_cfft_instance_f32;
-
-void arm_cfft_f32(const arm_cfft_instance_f32 * S, float32_t * p1,
-		uint8_t ifftFlag, uint8_t bitReverseFlag);
-
-/**
- * @brief Instance structure for the Q15 RFFT/RIFFT function.
- */
-typedef struct {
-	uint32_t fftLenReal; /**< length of the real FFT. */
-	uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
-	uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
-	uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
-	q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
-	q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
-	const arm_cfft_instance_q15 *pCfft; /**< points to the complex FFT instance. */
-} arm_rfft_instance_q15;
-
-arm_status arm_rfft_init_q15(arm_rfft_instance_q15 * S, uint32_t fftLenReal,
-		uint32_t ifftFlagR, uint32_t bitReverseFlag);
-
-void arm_rfft_q15(const arm_rfft_instance_q15 * S, q15_t * pSrc, q15_t * pDst);
-
-/**
- * @brief Instance structure for the Q31 RFFT/RIFFT function.
- */
-typedef struct {
-	uint32_t fftLenReal; /**< length of the real FFT. */
-	uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
-	uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
-	uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
-	q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
-	q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
-	const arm_cfft_instance_q31 *pCfft; /**< points to the complex FFT instance. */
-} arm_rfft_instance_q31;
-
-arm_status arm_rfft_init_q31(arm_rfft_instance_q31 * S, uint32_t fftLenReal,
-		uint32_t ifftFlagR, uint32_t bitReverseFlag);
-
-void arm_rfft_q31(const arm_rfft_instance_q31 * S, q31_t * pSrc, q31_t * pDst);
-
-/**
- * @brief Instance structure for the floating-point RFFT/RIFFT function.
- */
-typedef struct {
-	uint32_t fftLenReal; /**< length of the real FFT. */
-	uint16_t fftLenBy2; /**< length of the complex FFT. */
-	uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
-	uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
-	uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
-	float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
-	float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
-	arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
-} arm_rfft_instance_f32;
-
-arm_status arm_rfft_init_f32(arm_rfft_instance_f32 * S,
-		arm_cfft_radix4_instance_f32 * S_CFFT, uint32_t fftLenReal,
-		uint32_t ifftFlagR, uint32_t bitReverseFlag);
-
-void arm_rfft_f32(const arm_rfft_instance_f32 * S, float32_t * pSrc,
-		float32_t * pDst);
-
-/**
- * @brief Instance structure for the floating-point RFFT/RIFFT function.
- */
-typedef struct {
-	arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */
-	uint16_t fftLenRFFT; /**< length of the real sequence */
-	float32_t * pTwiddleRFFT; /**< Twiddle factors real stage  */
-} arm_rfft_fast_instance_f32;
-
-arm_status arm_rfft_fast_init_f32(arm_rfft_fast_instance_f32 * S,
-		uint16_t fftLen);
-
-void arm_rfft_fast_f32(arm_rfft_fast_instance_f32 * S, float32_t * p,
-		float32_t * pOut, uint8_t ifftFlag);
-
-/**
- * @brief Instance structure for the floating-point DCT4/IDCT4 function.
- */
-typedef struct {
-	uint16_t N; /**< length of the DCT4. */
-	uint16_t Nby2; /**< half of the length of the DCT4. */
-	float32_t normalize; /**< normalizing factor. */
-	float32_t *pTwiddle; /**< points to the twiddle factor table. */
-	float32_t *pCosFactor; /**< points to the cosFactor table. */
-	arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */
-	arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
-} arm_dct4_instance_f32;
-
-/**
- * @brief  Initialization function for the floating-point DCT4/IDCT4.
- * @param[in,out] S          points to an instance of floating-point DCT4/IDCT4 structure.
- * @param[in]     S_RFFT     points to an instance of floating-point RFFT/RIFFT structure.
- * @param[in]     S_CFFT     points to an instance of floating-point CFFT/CIFFT structure.
- * @param[in]     N          length of the DCT4.
- * @param[in]     Nby2       half of the length of the DCT4.
- * @param[in]     normalize  normalizing factor.
- * @return      arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLenReal</code> is not a supported transform length.
- */
-arm_status arm_dct4_init_f32(arm_dct4_instance_f32 * S,
-		arm_rfft_instance_f32 * S_RFFT, arm_cfft_radix4_instance_f32 * S_CFFT,
-		uint16_t N, uint16_t Nby2, float32_t normalize);
-
-/**
- * @brief Processing function for the floating-point DCT4/IDCT4.
- * @param[in]     S              points to an instance of the floating-point DCT4/IDCT4 structure.
- * @param[in]     pState         points to state buffer.
- * @param[in,out] pInlineBuffer  points to the in-place input and output buffer.
- */
-void arm_dct4_f32(const arm_dct4_instance_f32 * S, float32_t * pState,
-		float32_t * pInlineBuffer);
-
-/**
- * @brief Instance structure for the Q31 DCT4/IDCT4 function.
- */
-typedef struct {
-	uint16_t N; /**< length of the DCT4. */
-	uint16_t Nby2; /**< half of the length of the DCT4. */
-	q31_t normalize; /**< normalizing factor. */
-	q31_t *pTwiddle; /**< points to the twiddle factor table. */
-	q31_t *pCosFactor; /**< points to the cosFactor table. */
-	arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */
-	arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */
-} arm_dct4_instance_q31;
-
-/**
- * @brief  Initialization function for the Q31 DCT4/IDCT4.
- * @param[in,out] S          points to an instance of Q31 DCT4/IDCT4 structure.
- * @param[in]     S_RFFT     points to an instance of Q31 RFFT/RIFFT structure
- * @param[in]     S_CFFT     points to an instance of Q31 CFFT/CIFFT structure
- * @param[in]     N          length of the DCT4.
- * @param[in]     Nby2       half of the length of the DCT4.
- * @param[in]     normalize  normalizing factor.
- * @return      arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length.
- */
-arm_status arm_dct4_init_q31(arm_dct4_instance_q31 * S,
-		arm_rfft_instance_q31 * S_RFFT, arm_cfft_radix4_instance_q31 * S_CFFT,
-		uint16_t N, uint16_t Nby2, q31_t normalize);
-
-/**
- * @brief Processing function for the Q31 DCT4/IDCT4.
- * @param[in]     S              points to an instance of the Q31 DCT4 structure.
- * @param[in]     pState         points to state buffer.
- * @param[in,out] pInlineBuffer  points to the in-place input and output buffer.
- */
-void arm_dct4_q31(const arm_dct4_instance_q31 * S, q31_t * pState,
-		q31_t * pInlineBuffer);
-
-/**
- * @brief Instance structure for the Q15 DCT4/IDCT4 function.
- */
-typedef struct {
-	uint16_t N; /**< length of the DCT4. */
-	uint16_t Nby2; /**< half of the length of the DCT4. */
-	q15_t normalize; /**< normalizing factor. */
-	q15_t *pTwiddle; /**< points to the twiddle factor table. */
-	q15_t *pCosFactor; /**< points to the cosFactor table. */
-	arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */
-	arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */
-} arm_dct4_instance_q15;
-
-/**
- * @brief  Initialization function for the Q15 DCT4/IDCT4.
- * @param[in,out] S          points to an instance of Q15 DCT4/IDCT4 structure.
- * @param[in]     S_RFFT     points to an instance of Q15 RFFT/RIFFT structure.
- * @param[in]     S_CFFT     points to an instance of Q15 CFFT/CIFFT structure.
- * @param[in]     N          length of the DCT4.
- * @param[in]     Nby2       half of the length of the DCT4.
- * @param[in]     normalize  normalizing factor.
- * @return      arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length.
- */
-arm_status arm_dct4_init_q15(arm_dct4_instance_q15 * S,
-		arm_rfft_instance_q15 * S_RFFT, arm_cfft_radix4_instance_q15 * S_CFFT,
-		uint16_t N, uint16_t Nby2, q15_t normalize);
-
-/**
- * @brief Processing function for the Q15 DCT4/IDCT4.
- * @param[in]     S              points to an instance of the Q15 DCT4 structure.
- * @param[in]     pState         points to state buffer.
- * @param[in,out] pInlineBuffer  points to the in-place input and output buffer.
- */
-void arm_dct4_q15(const arm_dct4_instance_q15 * S, q15_t * pState,
-		q15_t * pInlineBuffer);
-
-/**
- * @brief Floating-point vector addition.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_add_f32(float32_t * pSrcA, float32_t * pSrcB, float32_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief Q7 vector addition.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_add_q7(q7_t * pSrcA, q7_t * pSrcB, q7_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Q15 vector addition.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_add_q15(q15_t * pSrcA, q15_t * pSrcB, q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Q31 vector addition.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_add_q31(q31_t * pSrcA, q31_t * pSrcB, q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Floating-point vector subtraction.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_sub_f32(float32_t * pSrcA, float32_t * pSrcB, float32_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief Q7 vector subtraction.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_sub_q7(q7_t * pSrcA, q7_t * pSrcB, q7_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Q15 vector subtraction.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_sub_q15(q15_t * pSrcA, q15_t * pSrcB, q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Q31 vector subtraction.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_sub_q31(q31_t * pSrcA, q31_t * pSrcB, q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Multiplies a floating-point vector by a scalar.
- * @param[in]  pSrc       points to the input vector
- * @param[in]  scale      scale factor to be applied
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in the vector
- */
-void arm_scale_f32(float32_t * pSrc, float32_t scale, float32_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief Multiplies a Q7 vector by a scalar.
- * @param[in]  pSrc        points to the input vector
- * @param[in]  scaleFract  fractional portion of the scale value
- * @param[in]  shift       number of bits to shift the result by
- * @param[out] pDst        points to the output vector
- * @param[in]  blockSize   number of samples in the vector
- */
-void arm_scale_q7(q7_t * pSrc, q7_t scaleFract, int8_t shift, q7_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief Multiplies a Q15 vector by a scalar.
- * @param[in]  pSrc        points to the input vector
- * @param[in]  scaleFract  fractional portion of the scale value
- * @param[in]  shift       number of bits to shift the result by
- * @param[out] pDst        points to the output vector
- * @param[in]  blockSize   number of samples in the vector
- */
-void arm_scale_q15(q15_t * pSrc, q15_t scaleFract, int8_t shift, q15_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief Multiplies a Q31 vector by a scalar.
- * @param[in]  pSrc        points to the input vector
- * @param[in]  scaleFract  fractional portion of the scale value
- * @param[in]  shift       number of bits to shift the result by
- * @param[out] pDst        points to the output vector
- * @param[in]  blockSize   number of samples in the vector
- */
-void arm_scale_q31(q31_t * pSrc, q31_t scaleFract, int8_t shift, q31_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief Q7 vector absolute value.
- * @param[in]  pSrc       points to the input buffer
- * @param[out] pDst       points to the output buffer
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_abs_q7(q7_t * pSrc, q7_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Floating-point vector absolute value.
- * @param[in]  pSrc       points to the input buffer
- * @param[out] pDst       points to the output buffer
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_abs_f32(float32_t * pSrc, float32_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Q15 vector absolute value.
- * @param[in]  pSrc       points to the input buffer
- * @param[out] pDst       points to the output buffer
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_abs_q15(q15_t * pSrc, q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Q31 vector absolute value.
- * @param[in]  pSrc       points to the input buffer
- * @param[out] pDst       points to the output buffer
- * @param[in]  blockSize  number of samples in each vector
- */
-void arm_abs_q31(q31_t * pSrc, q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Dot product of floating-point vectors.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[in]  blockSize  number of samples in each vector
- * @param[out] result     output result returned here
- */
-void arm_dot_prod_f32(float32_t * pSrcA, float32_t * pSrcB, uint32_t blockSize,
-		float32_t * result);
-
-/**
- * @brief Dot product of Q7 vectors.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[in]  blockSize  number of samples in each vector
- * @param[out] result     output result returned here
- */
-void arm_dot_prod_q7(q7_t * pSrcA, q7_t * pSrcB, uint32_t blockSize,
-		q31_t * result);
-
-/**
- * @brief Dot product of Q15 vectors.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[in]  blockSize  number of samples in each vector
- * @param[out] result     output result returned here
- */
-void arm_dot_prod_q15(q15_t * pSrcA, q15_t * pSrcB, uint32_t blockSize,
-		q63_t * result);
-
-/**
- * @brief Dot product of Q31 vectors.
- * @param[in]  pSrcA      points to the first input vector
- * @param[in]  pSrcB      points to the second input vector
- * @param[in]  blockSize  number of samples in each vector
- * @param[out] result     output result returned here
- */
-void arm_dot_prod_q31(q31_t * pSrcA, q31_t * pSrcB, uint32_t blockSize,
-		q63_t * result);
-
-/**
- * @brief  Shifts the elements of a Q7 vector a specified number of bits.
- * @param[in]  pSrc       points to the input vector
- * @param[in]  shiftBits  number of bits to shift.  A positive value shifts left; a negative value shifts right.
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in the vector
- */
-void arm_shift_q7(q7_t * pSrc, int8_t shiftBits, q7_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief  Shifts the elements of a Q15 vector a specified number of bits.
- * @param[in]  pSrc       points to the input vector
- * @param[in]  shiftBits  number of bits to shift.  A positive value shifts left; a negative value shifts right.
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in the vector
- */
-void arm_shift_q15(q15_t * pSrc, int8_t shiftBits, q15_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief  Shifts the elements of a Q31 vector a specified number of bits.
- * @param[in]  pSrc       points to the input vector
- * @param[in]  shiftBits  number of bits to shift.  A positive value shifts left; a negative value shifts right.
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in the vector
- */
-void arm_shift_q31(q31_t * pSrc, int8_t shiftBits, q31_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief  Adds a constant offset to a floating-point vector.
- * @param[in]  pSrc       points to the input vector
- * @param[in]  offset     is the offset to be added
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in the vector
- */
-void arm_offset_f32(float32_t * pSrc, float32_t offset, float32_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief  Adds a constant offset to a Q7 vector.
- * @param[in]  pSrc       points to the input vector
- * @param[in]  offset     is the offset to be added
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in the vector
- */
-void arm_offset_q7(q7_t * pSrc, q7_t offset, q7_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Adds a constant offset to a Q15 vector.
- * @param[in]  pSrc       points to the input vector
- * @param[in]  offset     is the offset to be added
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in the vector
- */
-void arm_offset_q15(q15_t * pSrc, q15_t offset, q15_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief  Adds a constant offset to a Q31 vector.
- * @param[in]  pSrc       points to the input vector
- * @param[in]  offset     is the offset to be added
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in the vector
- */
-void arm_offset_q31(q31_t * pSrc, q31_t offset, q31_t * pDst,
-		uint32_t blockSize);
-
-/**
- * @brief  Negates the elements of a floating-point vector.
- * @param[in]  pSrc       points to the input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in the vector
- */
-void arm_negate_f32(float32_t * pSrc, float32_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Negates the elements of a Q7 vector.
- * @param[in]  pSrc       points to the input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in the vector
- */
-void arm_negate_q7(q7_t * pSrc, q7_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Negates the elements of a Q15 vector.
- * @param[in]  pSrc       points to the input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in the vector
- */
-void arm_negate_q15(q15_t * pSrc, q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Negates the elements of a Q31 vector.
- * @param[in]  pSrc       points to the input vector
- * @param[out] pDst       points to the output vector
- * @param[in]  blockSize  number of samples in the vector
- */
-void arm_negate_q31(q31_t * pSrc, q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Copies the elements of a floating-point vector.
- * @param[in]  pSrc       input pointer
- * @param[out] pDst       output pointer
- * @param[in]  blockSize  number of samples to process
- */
-void arm_copy_f32(float32_t * pSrc, float32_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Copies the elements of a Q7 vector.
- * @param[in]  pSrc       input pointer
- * @param[out] pDst       output pointer
- * @param[in]  blockSize  number of samples to process
- */
-void arm_copy_q7(q7_t * pSrc, q7_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Copies the elements of a Q15 vector.
- * @param[in]  pSrc       input pointer
- * @param[out] pDst       output pointer
- * @param[in]  blockSize  number of samples to process
- */
-void arm_copy_q15(q15_t * pSrc, q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Copies the elements of a Q31 vector.
- * @param[in]  pSrc       input pointer
- * @param[out] pDst       output pointer
- * @param[in]  blockSize  number of samples to process
- */
-void arm_copy_q31(q31_t * pSrc, q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Fills a constant value into a floating-point vector.
- * @param[in]  value      input value to be filled
- * @param[out] pDst       output pointer
- * @param[in]  blockSize  number of samples to process
- */
-void arm_fill_f32(float32_t value, float32_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Fills a constant value into a Q7 vector.
- * @param[in]  value      input value to be filled
- * @param[out] pDst       output pointer
- * @param[in]  blockSize  number of samples to process
- */
-void arm_fill_q7(q7_t value, q7_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Fills a constant value into a Q15 vector.
- * @param[in]  value      input value to be filled
- * @param[out] pDst       output pointer
- * @param[in]  blockSize  number of samples to process
- */
-void arm_fill_q15(q15_t value, q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Fills a constant value into a Q31 vector.
- * @param[in]  value      input value to be filled
- * @param[out] pDst       output pointer
- * @param[in]  blockSize  number of samples to process
- */
-void arm_fill_q31(q31_t value, q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Convolution of floating-point sequences.
- * @param[in]  pSrcA    points to the first input sequence.
- * @param[in]  srcALen  length of the first input sequence.
- * @param[in]  pSrcB    points to the second input sequence.
- * @param[in]  srcBLen  length of the second input sequence.
- * @param[out] pDst     points to the location where the output result is written.  Length srcALen+srcBLen-1.
- */
-void arm_conv_f32(float32_t * pSrcA, uint32_t srcALen, float32_t * pSrcB,
-		uint32_t srcBLen, float32_t * pDst);
-
-/**
- * @brief Convolution of Q15 sequences.
- * @param[in]  pSrcA      points to the first input sequence.
- * @param[in]  srcALen    length of the first input sequence.
- * @param[in]  pSrcB      points to the second input sequence.
- * @param[in]  srcBLen    length of the second input sequence.
- * @param[out] pDst       points to the block of output data  Length srcALen+srcBLen-1.
- * @param[in]  pScratch1  points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in]  pScratch2  points to scratch buffer of size min(srcALen, srcBLen).
- */
-void arm_conv_opt_q15(q15_t * pSrcA, uint32_t srcALen, q15_t * pSrcB,
-		uint32_t srcBLen, q15_t * pDst, q15_t * pScratch1, q15_t * pScratch2);
-
-/**
- * @brief Convolution of Q15 sequences.
- * @param[in]  pSrcA    points to the first input sequence.
- * @param[in]  srcALen  length of the first input sequence.
- * @param[in]  pSrcB    points to the second input sequence.
- * @param[in]  srcBLen  length of the second input sequence.
- * @param[out] pDst     points to the location where the output result is written.  Length srcALen+srcBLen-1.
- */
-void arm_conv_q15(q15_t * pSrcA, uint32_t srcALen, q15_t * pSrcB,
-		uint32_t srcBLen, q15_t * pDst);
-
-/**
- * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in]  pSrcA    points to the first input sequence.
- * @param[in]  srcALen  length of the first input sequence.
- * @param[in]  pSrcB    points to the second input sequence.
- * @param[in]  srcBLen  length of the second input sequence.
- * @param[out] pDst     points to the block of output data  Length srcALen+srcBLen-1.
- */
-void arm_conv_fast_q15(q15_t * pSrcA, uint32_t srcALen, q15_t * pSrcB,
-		uint32_t srcBLen, q15_t * pDst);
-
-/**
- * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in]  pSrcA      points to the first input sequence.
- * @param[in]  srcALen    length of the first input sequence.
- * @param[in]  pSrcB      points to the second input sequence.
- * @param[in]  srcBLen    length of the second input sequence.
- * @param[out] pDst       points to the block of output data  Length srcALen+srcBLen-1.
- * @param[in]  pScratch1  points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in]  pScratch2  points to scratch buffer of size min(srcALen, srcBLen).
- */
-void arm_conv_fast_opt_q15(q15_t * pSrcA, uint32_t srcALen, q15_t * pSrcB,
-		uint32_t srcBLen, q15_t * pDst, q15_t * pScratch1, q15_t * pScratch2);
-
-/**
- * @brief Convolution of Q31 sequences.
- * @param[in]  pSrcA    points to the first input sequence.
- * @param[in]  srcALen  length of the first input sequence.
- * @param[in]  pSrcB    points to the second input sequence.
- * @param[in]  srcBLen  length of the second input sequence.
- * @param[out] pDst     points to the block of output data  Length srcALen+srcBLen-1.
- */
-void arm_conv_q31(q31_t * pSrcA, uint32_t srcALen, q31_t * pSrcB,
-		uint32_t srcBLen, q31_t * pDst);
-
-/**
- * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in]  pSrcA    points to the first input sequence.
- * @param[in]  srcALen  length of the first input sequence.
- * @param[in]  pSrcB    points to the second input sequence.
- * @param[in]  srcBLen  length of the second input sequence.
- * @param[out] pDst     points to the block of output data  Length srcALen+srcBLen-1.
- */
-void arm_conv_fast_q31(q31_t * pSrcA, uint32_t srcALen, q31_t * pSrcB,
-		uint32_t srcBLen, q31_t * pDst);
-
-/**
- * @brief Convolution of Q7 sequences.
- * @param[in]  pSrcA      points to the first input sequence.
- * @param[in]  srcALen    length of the first input sequence.
- * @param[in]  pSrcB      points to the second input sequence.
- * @param[in]  srcBLen    length of the second input sequence.
- * @param[out] pDst       points to the block of output data  Length srcALen+srcBLen-1.
- * @param[in]  pScratch1  points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in]  pScratch2  points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
- */
-void arm_conv_opt_q7(q7_t * pSrcA, uint32_t srcALen, q7_t * pSrcB,
-		uint32_t srcBLen, q7_t * pDst, q15_t * pScratch1, q15_t * pScratch2);
-
-/**
- * @brief Convolution of Q7 sequences.
- * @param[in]  pSrcA    points to the first input sequence.
- * @param[in]  srcALen  length of the first input sequence.
- * @param[in]  pSrcB    points to the second input sequence.
- * @param[in]  srcBLen  length of the second input sequence.
- * @param[out] pDst     points to the block of output data  Length srcALen+srcBLen-1.
- */
-void arm_conv_q7(q7_t * pSrcA, uint32_t srcALen, q7_t * pSrcB, uint32_t srcBLen,
-		q7_t * pDst);
-
-/**
- * @brief Partial convolution of floating-point sequences.
- * @param[in]  pSrcA       points to the first input sequence.
- * @param[in]  srcALen     length of the first input sequence.
- * @param[in]  pSrcB       points to the second input sequence.
- * @param[in]  srcBLen     length of the second input sequence.
- * @param[out] pDst        points to the block of output data
- * @param[in]  firstIndex  is the first output sample to start with.
- * @param[in]  numPoints   is the number of output points to be computed.
- * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-arm_status arm_conv_partial_f32(float32_t * pSrcA, uint32_t srcALen,
-		float32_t * pSrcB, uint32_t srcBLen, float32_t * pDst,
-		uint32_t firstIndex, uint32_t numPoints);
-
-/**
- * @brief Partial convolution of Q15 sequences.
- * @param[in]  pSrcA       points to the first input sequence.
- * @param[in]  srcALen     length of the first input sequence.
- * @param[in]  pSrcB       points to the second input sequence.
- * @param[in]  srcBLen     length of the second input sequence.
- * @param[out] pDst        points to the block of output data
- * @param[in]  firstIndex  is the first output sample to start with.
- * @param[in]  numPoints   is the number of output points to be computed.
- * @param[in]  pScratch1   points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in]  pScratch2   points to scratch buffer of size min(srcALen, srcBLen).
- * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-arm_status arm_conv_partial_opt_q15(q15_t * pSrcA, uint32_t srcALen,
-		q15_t * pSrcB, uint32_t srcBLen, q15_t * pDst, uint32_t firstIndex,
-		uint32_t numPoints, q15_t * pScratch1, q15_t * pScratch2);
-
-/**
- * @brief Partial convolution of Q15 sequences.
- * @param[in]  pSrcA       points to the first input sequence.
- * @param[in]  srcALen     length of the first input sequence.
- * @param[in]  pSrcB       points to the second input sequence.
- * @param[in]  srcBLen     length of the second input sequence.
- * @param[out] pDst        points to the block of output data
- * @param[in]  firstIndex  is the first output sample to start with.
- * @param[in]  numPoints   is the number of output points to be computed.
- * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-arm_status arm_conv_partial_q15(q15_t * pSrcA, uint32_t srcALen, q15_t * pSrcB,
-		uint32_t srcBLen, q15_t * pDst, uint32_t firstIndex, uint32_t numPoints);
-
-/**
- * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in]  pSrcA       points to the first input sequence.
- * @param[in]  srcALen     length of the first input sequence.
- * @param[in]  pSrcB       points to the second input sequence.
- * @param[in]  srcBLen     length of the second input sequence.
- * @param[out] pDst        points to the block of output data
- * @param[in]  firstIndex  is the first output sample to start with.
- * @param[in]  numPoints   is the number of output points to be computed.
- * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-arm_status arm_conv_partial_fast_q15(q15_t * pSrcA, uint32_t srcALen,
-		q15_t * pSrcB, uint32_t srcBLen, q15_t * pDst, uint32_t firstIndex,
-		uint32_t numPoints);
-
-/**
- * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in]  pSrcA       points to the first input sequence.
- * @param[in]  srcALen     length of the first input sequence.
- * @param[in]  pSrcB       points to the second input sequence.
- * @param[in]  srcBLen     length of the second input sequence.
- * @param[out] pDst        points to the block of output data
- * @param[in]  firstIndex  is the first output sample to start with.
- * @param[in]  numPoints   is the number of output points to be computed.
- * @param[in]  pScratch1   points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in]  pScratch2   points to scratch buffer of size min(srcALen, srcBLen).
- * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-arm_status arm_conv_partial_fast_opt_q15(q15_t * pSrcA, uint32_t srcALen,
-		q15_t * pSrcB, uint32_t srcBLen, q15_t * pDst, uint32_t firstIndex,
-		uint32_t numPoints, q15_t * pScratch1, q15_t * pScratch2);
-
-/**
- * @brief Partial convolution of Q31 sequences.
- * @param[in]  pSrcA       points to the first input sequence.
- * @param[in]  srcALen     length of the first input sequence.
- * @param[in]  pSrcB       points to the second input sequence.
- * @param[in]  srcBLen     length of the second input sequence.
- * @param[out] pDst        points to the block of output data
- * @param[in]  firstIndex  is the first output sample to start with.
- * @param[in]  numPoints   is the number of output points to be computed.
- * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-arm_status arm_conv_partial_q31(q31_t * pSrcA, uint32_t srcALen, q31_t * pSrcB,
-		uint32_t srcBLen, q31_t * pDst, uint32_t firstIndex, uint32_t numPoints);
-
-/**
- * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in]  pSrcA       points to the first input sequence.
- * @param[in]  srcALen     length of the first input sequence.
- * @param[in]  pSrcB       points to the second input sequence.
- * @param[in]  srcBLen     length of the second input sequence.
- * @param[out] pDst        points to the block of output data
- * @param[in]  firstIndex  is the first output sample to start with.
- * @param[in]  numPoints   is the number of output points to be computed.
- * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-arm_status arm_conv_partial_fast_q31(q31_t * pSrcA, uint32_t srcALen,
-		q31_t * pSrcB, uint32_t srcBLen, q31_t * pDst, uint32_t firstIndex,
-		uint32_t numPoints);
-
-/**
- * @brief Partial convolution of Q7 sequences
- * @param[in]  pSrcA       points to the first input sequence.
- * @param[in]  srcALen     length of the first input sequence.
- * @param[in]  pSrcB       points to the second input sequence.
- * @param[in]  srcBLen     length of the second input sequence.
- * @param[out] pDst        points to the block of output data
- * @param[in]  firstIndex  is the first output sample to start with.
- * @param[in]  numPoints   is the number of output points to be computed.
- * @param[in]  pScratch1   points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in]  pScratch2   points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
- * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-arm_status arm_conv_partial_opt_q7(q7_t * pSrcA, uint32_t srcALen, q7_t * pSrcB,
-		uint32_t srcBLen, q7_t * pDst, uint32_t firstIndex, uint32_t numPoints,
-		q15_t * pScratch1, q15_t * pScratch2);
-
-/**
- * @brief Partial convolution of Q7 sequences.
- * @param[in]  pSrcA       points to the first input sequence.
- * @param[in]  srcALen     length of the first input sequence.
- * @param[in]  pSrcB       points to the second input sequence.
- * @param[in]  srcBLen     length of the second input sequence.
- * @param[out] pDst        points to the block of output data
- * @param[in]  firstIndex  is the first output sample to start with.
- * @param[in]  numPoints   is the number of output points to be computed.
- * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-arm_status arm_conv_partial_q7(q7_t * pSrcA, uint32_t srcALen, q7_t * pSrcB,
-		uint32_t srcBLen, q7_t * pDst, uint32_t firstIndex, uint32_t numPoints);
-
-/**
- * @brief Instance structure for the Q15 FIR decimator.
- */
-typedef struct {
-	uint8_t M; /**< decimation factor. */
-	uint16_t numTaps; /**< number of coefficients in the filter. */
-	q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
-	q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-} arm_fir_decimate_instance_q15;
-
-/**
- * @brief Instance structure for the Q31 FIR decimator.
- */
-typedef struct {
-	uint8_t M; /**< decimation factor. */
-	uint16_t numTaps; /**< number of coefficients in the filter. */
-	q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
-	q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-} arm_fir_decimate_instance_q31;
-
-/**
- * @brief Instance structure for the floating-point FIR decimator.
- */
-typedef struct {
-	uint8_t M; /**< decimation factor. */
-	uint16_t numTaps; /**< number of coefficients in the filter. */
-	float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
-	float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-} arm_fir_decimate_instance_f32;
-
-/**
- * @brief Processing function for the floating-point FIR decimator.
- * @param[in]  S          points to an instance of the floating-point FIR decimator structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data
- * @param[in]  blockSize  number of input samples to process per call.
- */
-void arm_fir_decimate_f32(const arm_fir_decimate_instance_f32 * S,
-		float32_t * pSrc, float32_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the floating-point FIR decimator.
- * @param[in,out] S          points to an instance of the floating-point FIR decimator structure.
- * @param[in]     numTaps    number of coefficients in the filter.
- * @param[in]     M          decimation factor.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     blockSize  number of input samples to process per call.
- * @return    The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * <code>blockSize</code> is not a multiple of <code>M</code>.
- */
-arm_status arm_fir_decimate_init_f32(arm_fir_decimate_instance_f32 * S,
-		uint16_t numTaps, uint8_t M, float32_t * pCoeffs, float32_t * pState,
-		uint32_t blockSize);
-
-/**
- * @brief Processing function for the Q15 FIR decimator.
- * @param[in]  S          points to an instance of the Q15 FIR decimator structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data
- * @param[in]  blockSize  number of input samples to process per call.
- */
-void arm_fir_decimate_q15(const arm_fir_decimate_instance_q15 * S, q15_t * pSrc,
-		q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
- * @param[in]  S          points to an instance of the Q15 FIR decimator structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data
- * @param[in]  blockSize  number of input samples to process per call.
- */
-void arm_fir_decimate_fast_q15(const arm_fir_decimate_instance_q15 * S,
-		q15_t * pSrc, q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the Q15 FIR decimator.
- * @param[in,out] S          points to an instance of the Q15 FIR decimator structure.
- * @param[in]     numTaps    number of coefficients in the filter.
- * @param[in]     M          decimation factor.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     blockSize  number of input samples to process per call.
- * @return    The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * <code>blockSize</code> is not a multiple of <code>M</code>.
- */
-arm_status arm_fir_decimate_init_q15(arm_fir_decimate_instance_q15 * S,
-		uint16_t numTaps, uint8_t M, q15_t * pCoeffs, q15_t * pState,
-		uint32_t blockSize);
-
-/**
- * @brief Processing function for the Q31 FIR decimator.
- * @param[in]  S     points to an instance of the Q31 FIR decimator structure.
- * @param[in]  pSrc  points to the block of input data.
- * @param[out] pDst  points to the block of output data
- * @param[in] blockSize number of input samples to process per call.
- */
-void arm_fir_decimate_q31(const arm_fir_decimate_instance_q31 * S, q31_t * pSrc,
-		q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
- * @param[in]  S          points to an instance of the Q31 FIR decimator structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data
- * @param[in]  blockSize  number of input samples to process per call.
- */
-void arm_fir_decimate_fast_q31(arm_fir_decimate_instance_q31 * S, q31_t * pSrc,
-		q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the Q31 FIR decimator.
- * @param[in,out] S          points to an instance of the Q31 FIR decimator structure.
- * @param[in]     numTaps    number of coefficients in the filter.
- * @param[in]     M          decimation factor.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     blockSize  number of input samples to process per call.
- * @return    The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * <code>blockSize</code> is not a multiple of <code>M</code>.
- */
-arm_status arm_fir_decimate_init_q31(arm_fir_decimate_instance_q31 * S,
-		uint16_t numTaps, uint8_t M, q31_t * pCoeffs, q31_t * pState,
-		uint32_t blockSize);
-
-/**
- * @brief Instance structure for the Q15 FIR interpolator.
- */
-typedef struct {
-	uint8_t L; /**< upsample factor. */
-	uint16_t phaseLength; /**< length of each polyphase filter component. */
-	q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
-	q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
-} arm_fir_interpolate_instance_q15;
-
-/**
- * @brief Instance structure for the Q31 FIR interpolator.
- */
-typedef struct {
-	uint8_t L; /**< upsample factor. */
-	uint16_t phaseLength; /**< length of each polyphase filter component. */
-	q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
-	q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
-} arm_fir_interpolate_instance_q31;
-
-/**
- * @brief Instance structure for the floating-point FIR interpolator.
- */
-typedef struct {
-	uint8_t L; /**< upsample factor. */
-	uint16_t phaseLength; /**< length of each polyphase filter component. */
-	float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
-	float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */
-} arm_fir_interpolate_instance_f32;
-
-/**
- * @brief Processing function for the Q15 FIR interpolator.
- * @param[in]  S          points to an instance of the Q15 FIR interpolator structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of input samples to process per call.
- */
-void arm_fir_interpolate_q15(const arm_fir_interpolate_instance_q15 * S,
-		q15_t * pSrc, q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the Q15 FIR interpolator.
- * @param[in,out] S          points to an instance of the Q15 FIR interpolator structure.
- * @param[in]     L          upsample factor.
- * @param[in]     numTaps    number of filter coefficients in the filter.
- * @param[in]     pCoeffs    points to the filter coefficient buffer.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     blockSize  number of input samples to process per call.
- * @return        The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
- */
-arm_status arm_fir_interpolate_init_q15(arm_fir_interpolate_instance_q15 * S,
-		uint8_t L, uint16_t numTaps, q15_t * pCoeffs, q15_t * pState,
-		uint32_t blockSize);
-
-/**
- * @brief Processing function for the Q31 FIR interpolator.
- * @param[in]  S          points to an instance of the Q15 FIR interpolator structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of input samples to process per call.
- */
-void arm_fir_interpolate_q31(const arm_fir_interpolate_instance_q31 * S,
-		q31_t * pSrc, q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the Q31 FIR interpolator.
- * @param[in,out] S          points to an instance of the Q31 FIR interpolator structure.
- * @param[in]     L          upsample factor.
- * @param[in]     numTaps    number of filter coefficients in the filter.
- * @param[in]     pCoeffs    points to the filter coefficient buffer.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     blockSize  number of input samples to process per call.
- * @return        The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
- */
-arm_status arm_fir_interpolate_init_q31(arm_fir_interpolate_instance_q31 * S,
-		uint8_t L, uint16_t numTaps, q31_t * pCoeffs, q31_t * pState,
-		uint32_t blockSize);
-
-/**
- * @brief Processing function for the floating-point FIR interpolator.
- * @param[in]  S          points to an instance of the floating-point FIR interpolator structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of input samples to process per call.
- */
-void arm_fir_interpolate_f32(const arm_fir_interpolate_instance_f32 * S,
-		float32_t * pSrc, float32_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the floating-point FIR interpolator.
- * @param[in,out] S          points to an instance of the floating-point FIR interpolator structure.
- * @param[in]     L          upsample factor.
- * @param[in]     numTaps    number of filter coefficients in the filter.
- * @param[in]     pCoeffs    points to the filter coefficient buffer.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     blockSize  number of input samples to process per call.
- * @return        The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
- */
-arm_status arm_fir_interpolate_init_f32(arm_fir_interpolate_instance_f32 * S,
-		uint8_t L, uint16_t numTaps, float32_t * pCoeffs, float32_t * pState,
-		uint32_t blockSize);
-
-/**
- * @brief Instance structure for the high precision Q31 Biquad cascade filter.
- */
-typedef struct {
-	uint8_t numStages; /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
-	q63_t *pState; /**< points to the array of state coefficients.  The array is of length 4*numStages. */
-	q31_t *pCoeffs; /**< points to the array of coefficients.  The array is of length 5*numStages. */
-	uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */
-} arm_biquad_cas_df1_32x64_ins_q31;
-
-/**
- * @param[in]  S          points to an instance of the high precision Q31 Biquad cascade filter structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_biquad_cas_df1_32x64_q31(const arm_biquad_cas_df1_32x64_ins_q31 * S,
-		q31_t * pSrc, q31_t * pDst, uint32_t blockSize);
-
-/**
- * @param[in,out] S          points to an instance of the high precision Q31 Biquad cascade filter structure.
- * @param[in]     numStages  number of 2nd order stages in the filter.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     postShift  shift to be applied to the output. Varies according to the coefficients format
- */
-void arm_biquad_cas_df1_32x64_init_q31(arm_biquad_cas_df1_32x64_ins_q31 * S,
-		uint8_t numStages, q31_t * pCoeffs, q63_t * pState, uint8_t postShift);
-
-/**
- * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
- */
-typedef struct {
-	uint8_t numStages; /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
-	float32_t *pState; /**< points to the array of state coefficients.  The array is of length 2*numStages. */
-	float32_t *pCoeffs; /**< points to the array of coefficients.  The array is of length 5*numStages. */
-} arm_biquad_cascade_df2T_instance_f32;
-
-/**
- * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
- */
-typedef struct {
-	uint8_t numStages; /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
-	float32_t *pState; /**< points to the array of state coefficients.  The array is of length 4*numStages. */
-	float32_t *pCoeffs; /**< points to the array of coefficients.  The array is of length 5*numStages. */
-} arm_biquad_cascade_stereo_df2T_instance_f32;
-
-/**
- * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
- */
-typedef struct {
-	uint8_t numStages; /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
-	float64_t *pState; /**< points to the array of state coefficients.  The array is of length 2*numStages. */
-	float64_t *pCoeffs; /**< points to the array of coefficients.  The array is of length 5*numStages. */
-} arm_biquad_cascade_df2T_instance_f64;
-
-/**
- * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
- * @param[in]  S          points to an instance of the filter data structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_biquad_cascade_df2T_f32(const arm_biquad_cascade_df2T_instance_f32 * S,
-		float32_t * pSrc, float32_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. 2 channels
- * @param[in]  S          points to an instance of the filter data structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_biquad_cascade_stereo_df2T_f32(
-		const arm_biquad_cascade_stereo_df2T_instance_f32 * S, float32_t * pSrc,
-		float32_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
- * @param[in]  S          points to an instance of the filter data structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_biquad_cascade_df2T_f64(const arm_biquad_cascade_df2T_instance_f64 * S,
-		float64_t * pSrc, float64_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the floating-point transposed direct form II Biquad cascade filter.
- * @param[in,out] S          points to an instance of the filter data structure.
- * @param[in]     numStages  number of 2nd order stages in the filter.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- */
-void arm_biquad_cascade_df2T_init_f32(arm_biquad_cascade_df2T_instance_f32 * S,
-		uint8_t numStages, float32_t * pCoeffs, float32_t * pState);
-
-/**
- * @brief  Initialization function for the floating-point transposed direct form II Biquad cascade filter.
- * @param[in,out] S          points to an instance of the filter data structure.
- * @param[in]     numStages  number of 2nd order stages in the filter.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- */
-void arm_biquad_cascade_stereo_df2T_init_f32(
-		arm_biquad_cascade_stereo_df2T_instance_f32 * S, uint8_t numStages,
-		float32_t * pCoeffs, float32_t * pState);
-
-/**
- * @brief  Initialization function for the floating-point transposed direct form II Biquad cascade filter.
- * @param[in,out] S          points to an instance of the filter data structure.
- * @param[in]     numStages  number of 2nd order stages in the filter.
- * @param[in]     pCoeffs    points to the filter coefficients.
- * @param[in]     pState     points to the state buffer.
- */
-void arm_biquad_cascade_df2T_init_f64(arm_biquad_cascade_df2T_instance_f64 * S,
-		uint8_t numStages, float64_t * pCoeffs, float64_t * pState);
-
-/**
- * @brief Instance structure for the Q15 FIR lattice filter.
- */
-typedef struct {
-	uint16_t numStages; /**< number of filter stages. */
-	q15_t *pState; /**< points to the state variable array. The array is of length numStages. */
-	q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
-} arm_fir_lattice_instance_q15;
-
-/**
- * @brief Instance structure for the Q31 FIR lattice filter.
- */
-typedef struct {
-	uint16_t numStages; /**< number of filter stages. */
-	q31_t *pState; /**< points to the state variable array. The array is of length numStages. */
-	q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
-} arm_fir_lattice_instance_q31;
-
-/**
- * @brief Instance structure for the floating-point FIR lattice filter.
- */
-typedef struct {
-	uint16_t numStages; /**< number of filter stages. */
-	float32_t *pState; /**< points to the state variable array. The array is of length numStages. */
-	float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
-} arm_fir_lattice_instance_f32;
-
-/**
- * @brief Initialization function for the Q15 FIR lattice filter.
- * @param[in] S          points to an instance of the Q15 FIR lattice structure.
- * @param[in] numStages  number of filter stages.
- * @param[in] pCoeffs    points to the coefficient buffer.  The array is of length numStages.
- * @param[in] pState     points to the state buffer.  The array is of length numStages.
- */
-void arm_fir_lattice_init_q15(arm_fir_lattice_instance_q15 * S,
-		uint16_t numStages, q15_t * pCoeffs, q15_t * pState);
-
-/**
- * @brief Processing function for the Q15 FIR lattice filter.
- * @param[in]  S          points to an instance of the Q15 FIR lattice structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_fir_lattice_q15(const arm_fir_lattice_instance_q15 * S, q15_t * pSrc,
-		q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Initialization function for the Q31 FIR lattice filter.
- * @param[in] S          points to an instance of the Q31 FIR lattice structure.
- * @param[in] numStages  number of filter stages.
- * @param[in] pCoeffs    points to the coefficient buffer.  The array is of length numStages.
- * @param[in] pState     points to the state buffer.   The array is of length numStages.
- */
-void arm_fir_lattice_init_q31(arm_fir_lattice_instance_q31 * S,
-		uint16_t numStages, q31_t * pCoeffs, q31_t * pState);
-
-/**
- * @brief Processing function for the Q31 FIR lattice filter.
- * @param[in]  S          points to an instance of the Q31 FIR lattice structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_fir_lattice_q31(const arm_fir_lattice_instance_q31 * S, q31_t * pSrc,
-		q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Initialization function for the floating-point FIR lattice filter.
- * @param[in] S          points to an instance of the floating-point FIR lattice structure.
- * @param[in] numStages  number of filter stages.
- * @param[in] pCoeffs    points to the coefficient buffer.  The array is of length numStages.
- * @param[in] pState     points to the state buffer.  The array is of length numStages.
- */
-void arm_fir_lattice_init_f32(arm_fir_lattice_instance_f32 * S,
-		uint16_t numStages, float32_t * pCoeffs, float32_t * pState);
-
-/**
- * @brief Processing function for the floating-point FIR lattice filter.
- * @param[in]  S          points to an instance of the floating-point FIR lattice structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_fir_lattice_f32(const arm_fir_lattice_instance_f32 * S,
-		float32_t * pSrc, float32_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Instance structure for the Q15 IIR lattice filter.
- */
-typedef struct {
-	uint16_t numStages; /**< number of stages in the filter. */
-	q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
-	q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
-	q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
-} arm_iir_lattice_instance_q15;
-
-/**
- * @brief Instance structure for the Q31 IIR lattice filter.
- */
-typedef struct {
-	uint16_t numStages; /**< number of stages in the filter. */
-	q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
-	q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
-	q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
-} arm_iir_lattice_instance_q31;
-
-/**
- * @brief Instance structure for the floating-point IIR lattice filter.
- */
-typedef struct {
-	uint16_t numStages; /**< number of stages in the filter. */
-	float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
-	float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
-	float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
-} arm_iir_lattice_instance_f32;
-
-/**
- * @brief Processing function for the floating-point IIR lattice filter.
- * @param[in]  S          points to an instance of the floating-point IIR lattice structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_iir_lattice_f32(const arm_iir_lattice_instance_f32 * S,
-		float32_t * pSrc, float32_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Initialization function for the floating-point IIR lattice filter.
- * @param[in] S          points to an instance of the floating-point IIR lattice structure.
- * @param[in] numStages  number of stages in the filter.
- * @param[in] pkCoeffs   points to the reflection coefficient buffer.  The array is of length numStages.
- * @param[in] pvCoeffs   points to the ladder coefficient buffer.  The array is of length numStages+1.
- * @param[in] pState     points to the state buffer.  The array is of length numStages+blockSize-1.
- * @param[in] blockSize  number of samples to process.
- */
-void arm_iir_lattice_init_f32(arm_iir_lattice_instance_f32 * S,
-		uint16_t numStages, float32_t * pkCoeffs, float32_t * pvCoeffs,
-		float32_t * pState, uint32_t blockSize);
-
-/**
- * @brief Processing function for the Q31 IIR lattice filter.
- * @param[in]  S          points to an instance of the Q31 IIR lattice structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_iir_lattice_q31(const arm_iir_lattice_instance_q31 * S, q31_t * pSrc,
-		q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Initialization function for the Q31 IIR lattice filter.
- * @param[in] S          points to an instance of the Q31 IIR lattice structure.
- * @param[in] numStages  number of stages in the filter.
- * @param[in] pkCoeffs   points to the reflection coefficient buffer.  The array is of length numStages.
- * @param[in] pvCoeffs   points to the ladder coefficient buffer.  The array is of length numStages+1.
- * @param[in] pState     points to the state buffer.  The array is of length numStages+blockSize.
- * @param[in] blockSize  number of samples to process.
- */
-void arm_iir_lattice_init_q31(arm_iir_lattice_instance_q31 * S,
-		uint16_t numStages, q31_t * pkCoeffs, q31_t * pvCoeffs, q31_t * pState,
-		uint32_t blockSize);
-
-/**
- * @brief Processing function for the Q15 IIR lattice filter.
- * @param[in]  S          points to an instance of the Q15 IIR lattice structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[out] pDst       points to the block of output data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_iir_lattice_q15(const arm_iir_lattice_instance_q15 * S, q15_t * pSrc,
-		q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Initialization function for the Q15 IIR lattice filter.
- * @param[in] S          points to an instance of the fixed-point Q15 IIR lattice structure.
- * @param[in] numStages  number of stages in the filter.
- * @param[in] pkCoeffs   points to reflection coefficient buffer.  The array is of length numStages.
- * @param[in] pvCoeffs   points to ladder coefficient buffer.  The array is of length numStages+1.
- * @param[in] pState     points to state buffer.  The array is of length numStages+blockSize.
- * @param[in] blockSize  number of samples to process per call.
- */
-void arm_iir_lattice_init_q15(arm_iir_lattice_instance_q15 * S,
-		uint16_t numStages, q15_t * pkCoeffs, q15_t * pvCoeffs, q15_t * pState,
-		uint32_t blockSize);
-
-/**
- * @brief Instance structure for the floating-point LMS filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< number of coefficients in the filter. */
-	float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-	float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
-	float32_t mu; /**< step size that controls filter coefficient updates. */
-} arm_lms_instance_f32;
-
-/**
- * @brief Processing function for floating-point LMS filter.
- * @param[in]  S          points to an instance of the floating-point LMS filter structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[in]  pRef       points to the block of reference data.
- * @param[out] pOut       points to the block of output data.
- * @param[out] pErr       points to the block of error data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_lms_f32(const arm_lms_instance_f32 * S, float32_t * pSrc,
-		float32_t * pRef, float32_t * pOut, float32_t * pErr,
-		uint32_t blockSize);
-
-/**
- * @brief Initialization function for floating-point LMS filter.
- * @param[in] S          points to an instance of the floating-point LMS filter structure.
- * @param[in] numTaps    number of filter coefficients.
- * @param[in] pCoeffs    points to the coefficient buffer.
- * @param[in] pState     points to state buffer.
- * @param[in] mu         step size that controls filter coefficient updates.
- * @param[in] blockSize  number of samples to process.
- */
-void arm_lms_init_f32(arm_lms_instance_f32 * S, uint16_t numTaps,
-		float32_t * pCoeffs, float32_t * pState, float32_t mu,
-		uint32_t blockSize);
-
-/**
- * @brief Instance structure for the Q15 LMS filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< number of coefficients in the filter. */
-	q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-	q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
-	q15_t mu; /**< step size that controls filter coefficient updates. */
-	uint32_t postShift; /**< bit shift applied to coefficients. */
-} arm_lms_instance_q15;
-
-/**
- * @brief Initialization function for the Q15 LMS filter.
- * @param[in] S          points to an instance of the Q15 LMS filter structure.
- * @param[in] numTaps    number of filter coefficients.
- * @param[in] pCoeffs    points to the coefficient buffer.
- * @param[in] pState     points to the state buffer.
- * @param[in] mu         step size that controls filter coefficient updates.
- * @param[in] blockSize  number of samples to process.
- * @param[in] postShift  bit shift applied to coefficients.
- */
-void arm_lms_init_q15(arm_lms_instance_q15 * S, uint16_t numTaps,
-		q15_t * pCoeffs, q15_t * pState, q15_t mu, uint32_t blockSize,
-		uint32_t postShift);
-
-/**
- * @brief Processing function for Q15 LMS filter.
- * @param[in]  S          points to an instance of the Q15 LMS filter structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[in]  pRef       points to the block of reference data.
- * @param[out] pOut       points to the block of output data.
- * @param[out] pErr       points to the block of error data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_lms_q15(const arm_lms_instance_q15 * S, q15_t * pSrc, q15_t * pRef,
-		q15_t * pOut, q15_t * pErr, uint32_t blockSize);
-
-/**
- * @brief Instance structure for the Q31 LMS filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< number of coefficients in the filter. */
-	q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-	q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
-	q31_t mu; /**< step size that controls filter coefficient updates. */
-	uint32_t postShift; /**< bit shift applied to coefficients. */
-} arm_lms_instance_q31;
-
-/**
- * @brief Processing function for Q31 LMS filter.
- * @param[in]  S          points to an instance of the Q15 LMS filter structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[in]  pRef       points to the block of reference data.
- * @param[out] pOut       points to the block of output data.
- * @param[out] pErr       points to the block of error data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_lms_q31(const arm_lms_instance_q31 * S, q31_t * pSrc, q31_t * pRef,
-		q31_t * pOut, q31_t * pErr, uint32_t blockSize);
-
-/**
- * @brief Initialization function for Q31 LMS filter.
- * @param[in] S          points to an instance of the Q31 LMS filter structure.
- * @param[in] numTaps    number of filter coefficients.
- * @param[in] pCoeffs    points to coefficient buffer.
- * @param[in] pState     points to state buffer.
- * @param[in] mu         step size that controls filter coefficient updates.
- * @param[in] blockSize  number of samples to process.
- * @param[in] postShift  bit shift applied to coefficients.
- */
-void arm_lms_init_q31(arm_lms_instance_q31 * S, uint16_t numTaps,
-		q31_t * pCoeffs, q31_t * pState, q31_t mu, uint32_t blockSize,
-		uint32_t postShift);
-
-/**
- * @brief Instance structure for the floating-point normalized LMS filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< number of coefficients in the filter. */
-	float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-	float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
-	float32_t mu; /**< step size that control filter coefficient updates. */
-	float32_t energy; /**< saves previous frame energy. */
-	float32_t x0; /**< saves previous input sample. */
-} arm_lms_norm_instance_f32;
-
-/**
- * @brief Processing function for floating-point normalized LMS filter.
- * @param[in]  S          points to an instance of the floating-point normalized LMS filter structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[in]  pRef       points to the block of reference data.
- * @param[out] pOut       points to the block of output data.
- * @param[out] pErr       points to the block of error data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_lms_norm_f32(arm_lms_norm_instance_f32 * S, float32_t * pSrc,
-		float32_t * pRef, float32_t * pOut, float32_t * pErr,
-		uint32_t blockSize);
-
-/**
- * @brief Initialization function for floating-point normalized LMS filter.
- * @param[in] S          points to an instance of the floating-point LMS filter structure.
- * @param[in] numTaps    number of filter coefficients.
- * @param[in] pCoeffs    points to coefficient buffer.
- * @param[in] pState     points to state buffer.
- * @param[in] mu         step size that controls filter coefficient updates.
- * @param[in] blockSize  number of samples to process.
- */
-void arm_lms_norm_init_f32(arm_lms_norm_instance_f32 * S, uint16_t numTaps,
-		float32_t * pCoeffs, float32_t * pState, float32_t mu,
-		uint32_t blockSize);
-
-/**
- * @brief Instance structure for the Q31 normalized LMS filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< number of coefficients in the filter. */
-	q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-	q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
-	q31_t mu; /**< step size that controls filter coefficient updates. */
-	uint8_t postShift; /**< bit shift applied to coefficients. */
-	q31_t *recipTable; /**< points to the reciprocal initial value table. */
-	q31_t energy; /**< saves previous frame energy. */
-	q31_t x0; /**< saves previous input sample. */
-} arm_lms_norm_instance_q31;
-
-/**
- * @brief Processing function for Q31 normalized LMS filter.
- * @param[in]  S          points to an instance of the Q31 normalized LMS filter structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[in]  pRef       points to the block of reference data.
- * @param[out] pOut       points to the block of output data.
- * @param[out] pErr       points to the block of error data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_lms_norm_q31(arm_lms_norm_instance_q31 * S, q31_t * pSrc, q31_t * pRef,
-		q31_t * pOut, q31_t * pErr, uint32_t blockSize);
-
-/**
- * @brief Initialization function for Q31 normalized LMS filter.
- * @param[in] S          points to an instance of the Q31 normalized LMS filter structure.
- * @param[in] numTaps    number of filter coefficients.
- * @param[in] pCoeffs    points to coefficient buffer.
- * @param[in] pState     points to state buffer.
- * @param[in] mu         step size that controls filter coefficient updates.
- * @param[in] blockSize  number of samples to process.
- * @param[in] postShift  bit shift applied to coefficients.
- */
-void arm_lms_norm_init_q31(arm_lms_norm_instance_q31 * S, uint16_t numTaps,
-		q31_t * pCoeffs, q31_t * pState, q31_t mu, uint32_t blockSize,
-		uint8_t postShift);
-
-/**
- * @brief Instance structure for the Q15 normalized LMS filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< Number of coefficients in the filter. */
-	q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-	q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
-	q15_t mu; /**< step size that controls filter coefficient updates. */
-	uint8_t postShift; /**< bit shift applied to coefficients. */
-	q15_t *recipTable; /**< Points to the reciprocal initial value table. */
-	q15_t energy; /**< saves previous frame energy. */
-	q15_t x0; /**< saves previous input sample. */
-} arm_lms_norm_instance_q15;
-
-/**
- * @brief Processing function for Q15 normalized LMS filter.
- * @param[in]  S          points to an instance of the Q15 normalized LMS filter structure.
- * @param[in]  pSrc       points to the block of input data.
- * @param[in]  pRef       points to the block of reference data.
- * @param[out] pOut       points to the block of output data.
- * @param[out] pErr       points to the block of error data.
- * @param[in]  blockSize  number of samples to process.
- */
-void arm_lms_norm_q15(arm_lms_norm_instance_q15 * S, q15_t * pSrc, q15_t * pRef,
-		q15_t * pOut, q15_t * pErr, uint32_t blockSize);
-
-/**
- * @brief Initialization function for Q15 normalized LMS filter.
- * @param[in] S          points to an instance of the Q15 normalized LMS filter structure.
- * @param[in] numTaps    number of filter coefficients.
- * @param[in] pCoeffs    points to coefficient buffer.
- * @param[in] pState     points to state buffer.
- * @param[in] mu         step size that controls filter coefficient updates.
- * @param[in] blockSize  number of samples to process.
- * @param[in] postShift  bit shift applied to coefficients.
- */
-void arm_lms_norm_init_q15(arm_lms_norm_instance_q15 * S, uint16_t numTaps,
-		q15_t * pCoeffs, q15_t * pState, q15_t mu, uint32_t blockSize,
-		uint8_t postShift);
-
-/**
- * @brief Correlation of floating-point sequences.
- * @param[in]  pSrcA    points to the first input sequence.
- * @param[in]  srcALen  length of the first input sequence.
- * @param[in]  pSrcB    points to the second input sequence.
- * @param[in]  srcBLen  length of the second input sequence.
- * @param[out] pDst     points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
- */
-void arm_correlate_f32(float32_t * pSrcA, uint32_t srcALen, float32_t * pSrcB,
-		uint32_t srcBLen, float32_t * pDst);
-
-/**
- * @brief Correlation of Q15 sequences
- * @param[in]  pSrcA     points to the first input sequence.
- * @param[in]  srcALen   length of the first input sequence.
- * @param[in]  pSrcB     points to the second input sequence.
- * @param[in]  srcBLen   length of the second input sequence.
- * @param[out] pDst      points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
- * @param[in]  pScratch  points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- */
-void arm_correlate_opt_q15(q15_t * pSrcA, uint32_t srcALen, q15_t * pSrcB,
-		uint32_t srcBLen, q15_t * pDst, q15_t * pScratch);
-
-/**
- * @brief Correlation of Q15 sequences.
- * @param[in]  pSrcA    points to the first input sequence.
- * @param[in]  srcALen  length of the first input sequence.
- * @param[in]  pSrcB    points to the second input sequence.
- * @param[in]  srcBLen  length of the second input sequence.
- * @param[out] pDst     points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
- */
-
-void arm_correlate_q15(q15_t * pSrcA, uint32_t srcALen, q15_t * pSrcB,
-		uint32_t srcBLen, q15_t * pDst);
-
-/**
- * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
- * @param[in]  pSrcA    points to the first input sequence.
- * @param[in]  srcALen  length of the first input sequence.
- * @param[in]  pSrcB    points to the second input sequence.
- * @param[in]  srcBLen  length of the second input sequence.
- * @param[out] pDst     points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
- */
-
-void arm_correlate_fast_q15(q15_t * pSrcA, uint32_t srcALen, q15_t * pSrcB,
-		uint32_t srcBLen, q15_t * pDst);
-
-/**
- * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
- * @param[in]  pSrcA     points to the first input sequence.
- * @param[in]  srcALen   length of the first input sequence.
- * @param[in]  pSrcB     points to the second input sequence.
- * @param[in]  srcBLen   length of the second input sequence.
- * @param[out] pDst      points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
- * @param[in]  pScratch  points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- */
-void arm_correlate_fast_opt_q15(q15_t * pSrcA, uint32_t srcALen, q15_t * pSrcB,
-		uint32_t srcBLen, q15_t * pDst, q15_t * pScratch);
-
-/**
- * @brief Correlation of Q31 sequences.
- * @param[in]  pSrcA    points to the first input sequence.
- * @param[in]  srcALen  length of the first input sequence.
- * @param[in]  pSrcB    points to the second input sequence.
- * @param[in]  srcBLen  length of the second input sequence.
- * @param[out] pDst     points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
- */
-void arm_correlate_q31(q31_t * pSrcA, uint32_t srcALen, q31_t * pSrcB,
-		uint32_t srcBLen, q31_t * pDst);
-
-/**
- * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in]  pSrcA    points to the first input sequence.
- * @param[in]  srcALen  length of the first input sequence.
- * @param[in]  pSrcB    points to the second input sequence.
- * @param[in]  srcBLen  length of the second input sequence.
- * @param[out] pDst     points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
- */
-void arm_correlate_fast_q31(q31_t * pSrcA, uint32_t srcALen, q31_t * pSrcB,
-		uint32_t srcBLen, q31_t * pDst);
-
-/**
- * @brief Correlation of Q7 sequences.
- * @param[in]  pSrcA      points to the first input sequence.
- * @param[in]  srcALen    length of the first input sequence.
- * @param[in]  pSrcB      points to the second input sequence.
- * @param[in]  srcBLen    length of the second input sequence.
- * @param[out] pDst       points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
- * @param[in]  pScratch1  points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in]  pScratch2  points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
- */
-void arm_correlate_opt_q7(q7_t * pSrcA, uint32_t srcALen, q7_t * pSrcB,
-		uint32_t srcBLen, q7_t * pDst, q15_t * pScratch1, q15_t * pScratch2);
-
-/**
- * @brief Correlation of Q7 sequences.
- * @param[in]  pSrcA    points to the first input sequence.
- * @param[in]  srcALen  length of the first input sequence.
- * @param[in]  pSrcB    points to the second input sequence.
- * @param[in]  srcBLen  length of the second input sequence.
- * @param[out] pDst     points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
- */
-void arm_correlate_q7(q7_t * pSrcA, uint32_t srcALen, q7_t * pSrcB,
-		uint32_t srcBLen, q7_t * pDst);
-
-/**
- * @brief Instance structure for the floating-point sparse FIR filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< number of coefficients in the filter. */
-	uint16_t stateIndex; /**< state buffer index.  Points to the oldest sample in the state buffer. */
-	float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
-	float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
-	uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
-	int32_t *pTapDelay; /**< points to the array of delay values.  The array is of length numTaps. */
-} arm_fir_sparse_instance_f32;
-
-/**
- * @brief Instance structure for the Q31 sparse FIR filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< number of coefficients in the filter. */
-	uint16_t stateIndex; /**< state buffer index.  Points to the oldest sample in the state buffer. */
-	q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
-	q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
-	uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
-	int32_t *pTapDelay; /**< points to the array of delay values.  The array is of length numTaps. */
-} arm_fir_sparse_instance_q31;
-
-/**
- * @brief Instance structure for the Q15 sparse FIR filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< number of coefficients in the filter. */
-	uint16_t stateIndex; /**< state buffer index.  Points to the oldest sample in the state buffer. */
-	q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
-	q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
-	uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
-	int32_t *pTapDelay; /**< points to the array of delay values.  The array is of length numTaps. */
-} arm_fir_sparse_instance_q15;
-
-/**
- * @brief Instance structure for the Q7 sparse FIR filter.
- */
-typedef struct {
-	uint16_t numTaps; /**< number of coefficients in the filter. */
-	uint16_t stateIndex; /**< state buffer index.  Points to the oldest sample in the state buffer. */
-	q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
-	q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
-	uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
-	int32_t *pTapDelay; /**< points to the array of delay values.  The array is of length numTaps. */
-} arm_fir_sparse_instance_q7;
-
-/**
- * @brief Processing function for the floating-point sparse FIR filter.
- * @param[in]  S           points to an instance of the floating-point sparse FIR structure.
- * @param[in]  pSrc        points to the block of input data.
- * @param[out] pDst        points to the block of output data
- * @param[in]  pScratchIn  points to a temporary buffer of size blockSize.
- * @param[in]  blockSize   number of input samples to process per call.
- */
-void arm_fir_sparse_f32(arm_fir_sparse_instance_f32 * S, float32_t * pSrc,
-		float32_t * pDst, float32_t * pScratchIn, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the floating-point sparse FIR filter.
- * @param[in,out] S          points to an instance of the floating-point sparse FIR structure.
- * @param[in]     numTaps    number of nonzero coefficients in the filter.
- * @param[in]     pCoeffs    points to the array of filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     pTapDelay  points to the array of offset times.
- * @param[in]     maxDelay   maximum offset time supported.
- * @param[in]     blockSize  number of samples that will be processed per block.
- */
-void arm_fir_sparse_init_f32(arm_fir_sparse_instance_f32 * S, uint16_t numTaps,
-		float32_t * pCoeffs, float32_t * pState, int32_t * pTapDelay,
-		uint16_t maxDelay, uint32_t blockSize);
-
-/**
- * @brief Processing function for the Q31 sparse FIR filter.
- * @param[in]  S           points to an instance of the Q31 sparse FIR structure.
- * @param[in]  pSrc        points to the block of input data.
- * @param[out] pDst        points to the block of output data
- * @param[in]  pScratchIn  points to a temporary buffer of size blockSize.
- * @param[in]  blockSize   number of input samples to process per call.
- */
-void arm_fir_sparse_q31(arm_fir_sparse_instance_q31 * S, q31_t * pSrc,
-		q31_t * pDst, q31_t * pScratchIn, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the Q31 sparse FIR filter.
- * @param[in,out] S          points to an instance of the Q31 sparse FIR structure.
- * @param[in]     numTaps    number of nonzero coefficients in the filter.
- * @param[in]     pCoeffs    points to the array of filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     pTapDelay  points to the array of offset times.
- * @param[in]     maxDelay   maximum offset time supported.
- * @param[in]     blockSize  number of samples that will be processed per block.
- */
-void arm_fir_sparse_init_q31(arm_fir_sparse_instance_q31 * S, uint16_t numTaps,
-		q31_t * pCoeffs, q31_t * pState, int32_t * pTapDelay, uint16_t maxDelay,
-		uint32_t blockSize);
-
-/**
- * @brief Processing function for the Q15 sparse FIR filter.
- * @param[in]  S            points to an instance of the Q15 sparse FIR structure.
- * @param[in]  pSrc         points to the block of input data.
- * @param[out] pDst         points to the block of output data
- * @param[in]  pScratchIn   points to a temporary buffer of size blockSize.
- * @param[in]  pScratchOut  points to a temporary buffer of size blockSize.
- * @param[in]  blockSize    number of input samples to process per call.
- */
-void arm_fir_sparse_q15(arm_fir_sparse_instance_q15 * S, q15_t * pSrc,
-		q15_t * pDst, q15_t * pScratchIn, q31_t * pScratchOut,
-		uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the Q15 sparse FIR filter.
- * @param[in,out] S          points to an instance of the Q15 sparse FIR structure.
- * @param[in]     numTaps    number of nonzero coefficients in the filter.
- * @param[in]     pCoeffs    points to the array of filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     pTapDelay  points to the array of offset times.
- * @param[in]     maxDelay   maximum offset time supported.
- * @param[in]     blockSize  number of samples that will be processed per block.
- */
-void arm_fir_sparse_init_q15(arm_fir_sparse_instance_q15 * S, uint16_t numTaps,
-		q15_t * pCoeffs, q15_t * pState, int32_t * pTapDelay, uint16_t maxDelay,
-		uint32_t blockSize);
-
-/**
- * @brief Processing function for the Q7 sparse FIR filter.
- * @param[in]  S            points to an instance of the Q7 sparse FIR structure.
- * @param[in]  pSrc         points to the block of input data.
- * @param[out] pDst         points to the block of output data
- * @param[in]  pScratchIn   points to a temporary buffer of size blockSize.
- * @param[in]  pScratchOut  points to a temporary buffer of size blockSize.
- * @param[in]  blockSize    number of input samples to process per call.
- */
-void arm_fir_sparse_q7(arm_fir_sparse_instance_q7 * S, q7_t * pSrc, q7_t * pDst,
-		q7_t * pScratchIn, q31_t * pScratchOut, uint32_t blockSize);
-
-/**
- * @brief  Initialization function for the Q7 sparse FIR filter.
- * @param[in,out] S          points to an instance of the Q7 sparse FIR structure.
- * @param[in]     numTaps    number of nonzero coefficients in the filter.
- * @param[in]     pCoeffs    points to the array of filter coefficients.
- * @param[in]     pState     points to the state buffer.
- * @param[in]     pTapDelay  points to the array of offset times.
- * @param[in]     maxDelay   maximum offset time supported.
- * @param[in]     blockSize  number of samples that will be processed per block.
- */
-void arm_fir_sparse_init_q7(arm_fir_sparse_instance_q7 * S, uint16_t numTaps,
-		q7_t * pCoeffs, q7_t * pState, int32_t * pTapDelay, uint16_t maxDelay,
-		uint32_t blockSize);
-
-/**
- * @brief  Floating-point sin_cos function.
- * @param[in]  theta   input value in degrees
- * @param[out] pSinVal  points to the processed sine output.
- * @param[out] pCosVal  points to the processed cos output.
- */
-void arm_sin_cos_f32(float32_t theta, float32_t * pSinVal, float32_t * pCosVal);
-
-/**
- * @brief  Q31 sin_cos function.
- * @param[in]  theta    scaled input value in degrees
- * @param[out] pSinVal  points to the processed sine output.
- * @param[out] pCosVal  points to the processed cosine output.
- */
-void arm_sin_cos_q31(q31_t theta, q31_t * pSinVal, q31_t * pCosVal);
-
-/**
- * @brief  Floating-point complex conjugate.
- * @param[in]  pSrc        points to the input vector
- * @param[out] pDst        points to the output vector
- * @param[in]  numSamples  number of complex samples in each vector
- */
-void arm_cmplx_conj_f32(float32_t * pSrc, float32_t * pDst, uint32_t numSamples);
-
-/**
- * @brief  Q31 complex conjugate.
- * @param[in]  pSrc        points to the input vector
- * @param[out] pDst        points to the output vector
- * @param[in]  numSamples  number of complex samples in each vector
- */
-void arm_cmplx_conj_q31(q31_t * pSrc, q31_t * pDst, uint32_t numSamples);
-
-/**
- * @brief  Q15 complex conjugate.
- * @param[in]  pSrc        points to the input vector
- * @param[out] pDst        points to the output vector
- * @param[in]  numSamples  number of complex samples in each vector
- */
-void arm_cmplx_conj_q15(q15_t * pSrc, q15_t * pDst, uint32_t numSamples);
-
-/**
- * @brief  Floating-point complex magnitude squared
- * @param[in]  pSrc        points to the complex input vector
- * @param[out] pDst        points to the real output vector
- * @param[in]  numSamples  number of complex samples in the input vector
- */
-void arm_cmplx_mag_squared_f32(float32_t * pSrc, float32_t * pDst,
-		uint32_t numSamples);
-
-/**
- * @brief  Q31 complex magnitude squared
- * @param[in]  pSrc        points to the complex input vector
- * @param[out] pDst        points to the real output vector
- * @param[in]  numSamples  number of complex samples in the input vector
- */
-void arm_cmplx_mag_squared_q31(q31_t * pSrc, q31_t * pDst, uint32_t numSamples);
-
-/**
- * @brief  Q15 complex magnitude squared
- * @param[in]  pSrc        points to the complex input vector
- * @param[out] pDst        points to the real output vector
- * @param[in]  numSamples  number of complex samples in the input vector
- */
-void arm_cmplx_mag_squared_q15(q15_t * pSrc, q15_t * pDst, uint32_t numSamples);
-
-/**
- * @ingroup groupController
- */
-
-/**
- * @defgroup PID PID Motor Control
- *
- * A Proportional Integral Derivative (PID) controller is a generic feedback control
- * loop mechanism widely used in industrial control systems.
- * A PID controller is the most commonly used type of feedback controller.
- *
- * This set of functions implements (PID) controllers
- * for Q15, Q31, and floating-point data types.  The functions operate on a single sample
- * of data and each call to the function returns a single processed value.
- * <code>S</code> points to an instance of the PID control data structure.  <code>in</code>
- * is the input sample value. The functions return the output value.
- *
- * \par Algorithm:
- * <pre>
- *    y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
- *    A0 = Kp + Ki + Kd
- *    A1 = (-Kp ) - (2 * Kd )
- *    A2 = Kd  </pre>
- *
- * \par
- * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant
- *
- * \par
- * \image html PID.gif "Proportional Integral Derivative Controller"
- *
- * \par
- * The PID controller calculates an "error" value as the difference between
- * the measured output and the reference input.
- * The controller attempts to minimize the error by adjusting the process control inputs.
- * The proportional value determines the reaction to the current error,
- * the integral value determines the reaction based on the sum of recent errors,
- * and the derivative value determines the reaction based on the rate at which the error has been changing.
- *
- * \par Instance Structure
- * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure.
- * A separate instance structure must be defined for each PID Controller.
- * There are separate instance structure declarations for each of the 3 supported data types.
- *
- * \par Reset Functions
- * There is also an associated reset function for each data type which clears the state array.
- *
- * \par Initialization Functions
- * There is also an associated initialization function for each data type.
- * The initialization function performs the following operations:
- * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains.
- * - Zeros out the values in the state buffer.
- *
- * \par
- * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function.
- *
- * \par Fixed-Point Behavior
- * Care must be taken when using the fixed-point versions of the PID Controller functions.
- * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
-/**
- * @addtogroup PID
- * @{
- */
-
-/**
- * @brief  Process function for the floating-point PID Control.
- * @param[in,out] S   is an instance of the floating-point PID Control structure
- * @param[in]     in  input sample to process
- * @return out processed output sample.
- */
-static __INLINE float32_t arm_pid_f32(
-  arm_pid_instance_f32 * S,
-  float32_t in)
-  {
-    float32_t out;
-
-    /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]  */
-    out = (S->A0 * in) +
-      (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]);
-
-    /* Update state */
-    S->state[1] = S->state[0];
-    S->state[0] = in;
-    S->state[2] = out;
-
-    /* return to application */
-    return (out);
-
-  }
-
-  /**
-   * @brief  Process function for the Q31 PID Control.
-   * @param[in,out] S  points to an instance of the Q31 PID Control structure
-   * @param[in]     in  input sample to process
-   * @return out processed output sample.
-   *
-   * <b>Scaling and Overflow Behavior:</b>
-   * \par
-   * The function is implemented using an internal 64-bit accumulator.
-   * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit.
-   * Thus, if the accumulator result overflows it wraps around rather than clip.
-   * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions.
-   * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format.
-   */
-  static __INLINE q31_t arm_pid_q31(
-  arm_pid_instance_q31 * S,
-  q31_t in)
-  {
-    q63_t acc;
-    q31_t out;
-
-    /* acc = A0 * x[n]  */
-    acc = (q63_t) S->A0 * in;
-
-    /* acc += A1 * x[n-1] */
-    acc += (q63_t) S->A1 * S->state[0];
-
-    /* acc += A2 * x[n-2]  */
-    acc += (q63_t) S->A2 * S->state[1];
-
-    /* convert output to 1.31 format to add y[n-1] */
-    out = (q31_t) (acc >> 31u);
-
-    /* out += y[n-1] */
-    out += S->state[2];
-
-    /* Update state */
-    S->state[1] = S->state[0];
-    S->state[0] = in;
-    S->state[2] = out;
-
-    /* return to application */
-    return (out);
-  }
-
-
-  /**
-   * @brief  Process function for the Q15 PID Control.
-   * @param[in,out] S   points to an instance of the Q15 PID Control structure
-   * @param[in]     in  input sample to process
-   * @return out processed output sample.
-   *
-   * <b>Scaling and Overflow Behavior:</b>
-   * \par
-   * The function is implemented using a 64-bit internal accumulator.
-   * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result.
-   * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format.
-   * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved.
-   * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits.
-   * Lastly, the accumulator is saturated to yield a result in 1.15 format.
-   */
-  static __INLINE q15_t arm_pid_q15(
-  arm_pid_instance_q15 * S,
-  q15_t in)
-  {
-    q63_t acc;
-    q15_t out;
-
-#ifndef ARM_MATH_CM0_FAMILY
-    __SIMD32_TYPE *vstate;
-
-    /* Implementation of PID controller */
-
-    /* acc = A0 * x[n]  */
-    acc = (q31_t) __SMUAD((uint32_t)S->A0, (uint32_t)in);
-
-    /* acc += A1 * x[n-1] + A2 * x[n-2]  */
-    vstate = __SIMD32_CONST(S->state); acc = (q63_t)__SMLALD((uint32_t)S->A1, (uint32_t)*vstate, (uint64_t)acc);
-#else
-/* acc = A0 * x[n]  */
-acc = ((q31_t) S->A0) * in;
-
-/* acc += A1 * x[n-1] + A2 * x[n-2]  */
-acc += (q31_t) S->A1 * S->state[0];
-acc += (q31_t) S->A2 * S->state[1];
-#endif
-
-/* acc += y[n-1] */
-acc += (q31_t) S->state[2] << 15;
-
-/* saturate the output */
-out = (q15_t) (__SSAT((acc >> 15), 16));
-
-/* Update state */
-S->state[1] = S->state[0];
-S->state[0] = in;
-S->state[2] = out;
-
-/* return to application */
-return (out);
-}
-
-/**
- * @} end of PID group
- */
-
-/**
- * @brief Floating-point matrix inverse.
- * @param[in]  src   points to the instance of the input floating-point matrix structure.
- * @param[out] dst   points to the instance of the output floating-point matrix structure.
- * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
- * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
- */
-arm_status arm_mat_inverse_f32(const arm_matrix_instance_f32 * src,
-	arm_matrix_instance_f32 * dst);
-
-/**
- * @brief Floating-point matrix inverse.
- * @param[in]  src   points to the instance of the input floating-point matrix structure.
- * @param[out] dst   points to the instance of the output floating-point matrix structure.
- * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
- * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
- */
-arm_status arm_mat_inverse_f64(const arm_matrix_instance_f64 * src,
-	arm_matrix_instance_f64 * dst);
-
-/**
- * @ingroup groupController
- */
-
-/**
- * @defgroup clarke Vector Clarke Transform
- * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector.
- * Generally the Clarke transform uses three-phase currents <code>Ia, Ib and Ic</code> to calculate currents
- * in the two-phase orthogonal stator axis <code>Ialpha</code> and <code>Ibeta</code>.
- * When <code>Ialpha</code> is superposed with <code>Ia</code> as shown in the figure below
- * \image html clarke.gif Stator current space vector and its components in (a,b).
- * and <code>Ia + Ib + Ic = 0</code>, in this condition <code>Ialpha</code> and <code>Ibeta</code>
- * can be calculated using only <code>Ia</code> and <code>Ib</code>.
- *
- * The function operates on a single sample of data and each call to the function returns the processed output.
- * The library provides separate functions for Q31 and floating-point data types.
- * \par Algorithm
- * \image html clarkeFormula.gif
- * where <code>Ia</code> and <code>Ib</code> are the instantaneous stator phases and
- * <code>pIalpha</code> and <code>pIbeta</code> are the two coordinates of time invariant vector.
- * \par Fixed-Point Behavior
- * Care must be taken when using the Q31 version of the Clarke transform.
- * In particular, the overflow and saturation behavior of the accumulator used must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
-/**
- * @addtogroup clarke
- * @{
- */
-
-/**
- *
- * @brief  Floating-point Clarke transform
- * @param[in]  Ia       input three-phase coordinate <code>a</code>
- * @param[in]  Ib       input three-phase coordinate <code>b</code>
- * @param[out] pIalpha  points to output two-phase orthogonal vector axis alpha
- * @param[out] pIbeta   points to output two-phase orthogonal vector axis beta
- */
-static __INLINE void arm_clarke_f32(
-	float32_t Ia,
-	float32_t Ib,
-	float32_t * pIalpha,
-	float32_t * pIbeta)
-{
-/* Calculate pIalpha using the equation, pIalpha = Ia */
-*pIalpha = Ia;
-
-/* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */
-*pIbeta = ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib);
-}
-
-/**
- * @brief  Clarke transform for Q31 version
- * @param[in]  Ia       input three-phase coordinate <code>a</code>
- * @param[in]  Ib       input three-phase coordinate <code>b</code>
- * @param[out] pIalpha  points to output two-phase orthogonal vector axis alpha
- * @param[out] pIbeta   points to output two-phase orthogonal vector axis beta
- *
- * <b>Scaling and Overflow Behavior:</b>
- * \par
- * The function is implemented using an internal 32-bit accumulator.
- * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
- * There is saturation on the addition, hence there is no risk of overflow.
- */
-static __INLINE void arm_clarke_q31(
-	q31_t Ia,
-	q31_t Ib,
-	q31_t * pIalpha,
-	q31_t * pIbeta)
-{
-q31_t product1, product2; /* Temporary variables used to store intermediate results */
-
-/* Calculating pIalpha from Ia by equation pIalpha = Ia */
-*pIalpha = Ia;
-
-/* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */
-product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30);
-
-/* Intermediate product is calculated by (2/sqrt(3) * Ib) */
-product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30);
-
-/* pIbeta is calculated by adding the intermediate products */
-*pIbeta = __QADD(product1, product2);
-}
-
-/**
- * @} end of clarke group
- */
-
-/**
- * @brief  Converts the elements of the Q7 vector to Q31 vector.
- * @param[in]  pSrc       input pointer
- * @param[out] pDst       output pointer
- * @param[in]  blockSize  number of samples to process
- */
-void arm_q7_to_q31(q7_t * pSrc, q31_t * pDst, uint32_t blockSize);
-
-/**
- * @ingroup groupController
- */
-
-/**
- * @defgroup inv_clarke Vector Inverse Clarke Transform
- * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases.
- *
- * The function operates on a single sample of data and each call to the function returns the processed output.
- * The library provides separate functions for Q31 and floating-point data types.
- * \par Algorithm
- * \image html clarkeInvFormula.gif
- * where <code>pIa</code> and <code>pIb</code> are the instantaneous stator phases and
- * <code>Ialpha</code> and <code>Ibeta</code> are the two coordinates of time invariant vector.
- * \par Fixed-Point Behavior
- * Care must be taken when using the Q31 version of the Clarke transform.
- * In particular, the overflow and saturation behavior of the accumulator used must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
-/**
- * @addtogroup inv_clarke
- * @{
- */
-
-/**
- * @brief  Floating-point Inverse Clarke transform
- * @param[in]  Ialpha  input two-phase orthogonal vector axis alpha
- * @param[in]  Ibeta   input two-phase orthogonal vector axis beta
- * @param[out] pIa     points to output three-phase coordinate <code>a</code>
- * @param[out] pIb     points to output three-phase coordinate <code>b</code>
- */
-static __INLINE void arm_inv_clarke_f32(
-	float32_t Ialpha,
-	float32_t Ibeta,
-	float32_t * pIa,
-	float32_t * pIb)
-{
-/* Calculating pIa from Ialpha by equation pIa = Ialpha */
-*pIa = Ialpha;
-
-/* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */
-*pIb = -0.5f * Ialpha + 0.8660254039f * Ibeta;
-}
-
-/**
- * @brief  Inverse Clarke transform for Q31 version
- * @param[in]  Ialpha  input two-phase orthogonal vector axis alpha
- * @param[in]  Ibeta   input two-phase orthogonal vector axis beta
- * @param[out] pIa     points to output three-phase coordinate <code>a</code>
- * @param[out] pIb     points to output three-phase coordinate <code>b</code>
- *
- * <b>Scaling and Overflow Behavior:</b>
- * \par
- * The function is implemented using an internal 32-bit accumulator.
- * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
- * There is saturation on the subtraction, hence there is no risk of overflow.
- */
-static __INLINE void arm_inv_clarke_q31(
-	q31_t Ialpha,
-	q31_t Ibeta,
-	q31_t * pIa,
-	q31_t * pIb)
-{
-q31_t product1, product2; /* Temporary variables used to store intermediate results */
-
-/* Calculating pIa from Ialpha by equation pIa = Ialpha */
-*pIa = Ialpha;
-
-/* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */
-product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31);
-
-/* Intermediate product is calculated by (1/sqrt(3) * pIb) */
-product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31);
-
-/* pIb is calculated by subtracting the products */
-*pIb = __QSUB(product2, product1);
-}
-
-/**
- * @} end of inv_clarke group
- */
-
-/**
- * @brief  Converts the elements of the Q7 vector to Q15 vector.
- * @param[in]  pSrc       input pointer
- * @param[out] pDst       output pointer
- * @param[in]  blockSize  number of samples to process
- */
-void arm_q7_to_q15(q7_t * pSrc, q15_t * pDst, uint32_t blockSize);
-
-/**
- * @ingroup groupController
- */
-
-/**
- * @defgroup park Vector Park Transform
- *
- * Forward Park transform converts the input two-coordinate vector to flux and torque components.
- * The Park transform can be used to realize the transformation of the <code>Ialpha</code> and the <code>Ibeta</code> currents
- * from the stationary to the moving reference frame and control the spatial relationship between
- * the stator vector current and rotor flux vector.
- * If we consider the d axis aligned with the rotor flux, the diagram below shows the
- * current vector and the relationship from the two reference frames:
- * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame"
- *
- * The function operates on a single sample of data and each call to the function returns the processed output.
- * The library provides separate functions for Q31 and floating-point data types.
- * \par Algorithm
- * \image html parkFormula.gif
- * where <code>Ialpha</code> and <code>Ibeta</code> are the stator vector components,
- * <code>pId</code> and <code>pIq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the
- * cosine and sine values of theta (rotor flux position).
- * \par Fixed-Point Behavior
- * Care must be taken when using the Q31 version of the Park transform.
- * In particular, the overflow and saturation behavior of the accumulator used must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
-/**
- * @addtogroup park
- * @{
- */
-
-/**
- * @brief Floating-point Park transform
- * @param[in]  Ialpha  input two-phase vector coordinate alpha
- * @param[in]  Ibeta   input two-phase vector coordinate beta
- * @param[out] pId     points to output   rotor reference frame d
- * @param[out] pIq     points to output   rotor reference frame q
- * @param[in]  sinVal  sine value of rotation angle theta
- * @param[in]  cosVal  cosine value of rotation angle theta
- *
- * The function implements the forward Park transform.
- *
- */
-static __INLINE void arm_park_f32(
-	float32_t Ialpha,
-	float32_t Ibeta,
-	float32_t * pId,
-	float32_t * pIq,
-	float32_t sinVal,
-	float32_t cosVal)
-{
-/* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */
-*pId = Ialpha * cosVal + Ibeta * sinVal;
-
-/* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */
-*pIq = -Ialpha * sinVal + Ibeta * cosVal;
-}
-
-/**
- * @brief  Park transform for Q31 version
- * @param[in]  Ialpha  input two-phase vector coordinate alpha
- * @param[in]  Ibeta   input two-phase vector coordinate beta
- * @param[out] pId     points to output rotor reference frame d
- * @param[out] pIq     points to output rotor reference frame q
- * @param[in]  sinVal  sine value of rotation angle theta
- * @param[in]  cosVal  cosine value of rotation angle theta
- *
- * <b>Scaling and Overflow Behavior:</b>
- * \par
- * The function is implemented using an internal 32-bit accumulator.
- * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
- * There is saturation on the addition and subtraction, hence there is no risk of overflow.
- */
-static __INLINE void arm_park_q31(
-	q31_t Ialpha,
-	q31_t Ibeta,
-	q31_t * pId,
-	q31_t * pIq,
-	q31_t sinVal,
-	q31_t cosVal)
-{
-q31_t product1, product2; /* Temporary variables used to store intermediate results */
-q31_t product3, product4; /* Temporary variables used to store intermediate results */
-
-/* Intermediate product is calculated by (Ialpha * cosVal) */
-product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31);
-
-/* Intermediate product is calculated by (Ibeta * sinVal) */
-product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31);
-
-/* Intermediate product is calculated by (Ialpha * sinVal) */
-product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31);
-
-/* Intermediate product is calculated by (Ibeta * cosVal) */
-product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31);
-
-/* Calculate pId by adding the two intermediate products 1 and 2 */
-*pId = __QADD(product1, product2);
-
-/* Calculate pIq by subtracting the two intermediate products 3 from 4 */
-*pIq = __QSUB(product4, product3);
-}
-
-/**
- * @} end of park group
- */
-
-/**
- * @brief  Converts the elements of the Q7 vector to floating-point vector.
- * @param[in]  pSrc       is input pointer
- * @param[out] pDst       is output pointer
- * @param[in]  blockSize  is the number of samples to process
- */
-void arm_q7_to_float(q7_t * pSrc, float32_t * pDst, uint32_t blockSize);
-
-/**
- * @ingroup groupController
- */
-
-/**
- * @defgroup inv_park Vector Inverse Park transform
- * Inverse Park transform converts the input flux and torque components to two-coordinate vector.
- *
- * The function operates on a single sample of data and each call to the function returns the processed output.
- * The library provides separate functions for Q31 and floating-point data types.
- * \par Algorithm
- * \image html parkInvFormula.gif
- * where <code>pIalpha</code> and <code>pIbeta</code> are the stator vector components,
- * <code>Id</code> and <code>Iq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the
- * cosine and sine values of theta (rotor flux position).
- * \par Fixed-Point Behavior
- * Care must be taken when using the Q31 version of the Park transform.
- * In particular, the overflow and saturation behavior of the accumulator used must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
-/**
- * @addtogroup inv_park
- * @{
- */
-
-/**
- * @brief  Floating-point Inverse Park transform
- * @param[in]  Id       input coordinate of rotor reference frame d
- * @param[in]  Iq       input coordinate of rotor reference frame q
- * @param[out] pIalpha  points to output two-phase orthogonal vector axis alpha
- * @param[out] pIbeta   points to output two-phase orthogonal vector axis beta
- * @param[in]  sinVal   sine value of rotation angle theta
- * @param[in]  cosVal   cosine value of rotation angle theta
- */
-static __INLINE void arm_inv_park_f32(
-	float32_t Id,
-	float32_t Iq,
-	float32_t * pIalpha,
-	float32_t * pIbeta,
-	float32_t sinVal,
-	float32_t cosVal)
-{
-/* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */
-*pIalpha = Id * cosVal - Iq * sinVal;
-
-/* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */
-*pIbeta = Id * sinVal + Iq * cosVal;
-}
-
-/**
- * @brief  Inverse Park transform for   Q31 version
- * @param[in]  Id       input coordinate of rotor reference frame d
- * @param[in]  Iq       input coordinate of rotor reference frame q
- * @param[out] pIalpha  points to output two-phase orthogonal vector axis alpha
- * @param[out] pIbeta   points to output two-phase orthogonal vector axis beta
- * @param[in]  sinVal   sine value of rotation angle theta
- * @param[in]  cosVal   cosine value of rotation angle theta
- *
- * <b>Scaling and Overflow Behavior:</b>
- * \par
- * The function is implemented using an internal 32-bit accumulator.
- * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
- * There is saturation on the addition, hence there is no risk of overflow.
- */
-static __INLINE void arm_inv_park_q31(
-	q31_t Id,
-	q31_t Iq,
-	q31_t * pIalpha,
-	q31_t * pIbeta,
-	q31_t sinVal,
-	q31_t cosVal)
-{
-q31_t product1, product2; /* Temporary variables used to store intermediate results */
-q31_t product3, product4; /* Temporary variables used to store intermediate results */
-
-/* Intermediate product is calculated by (Id * cosVal) */
-product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31);
-
-/* Intermediate product is calculated by (Iq * sinVal) */
-product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31);
-
-/* Intermediate product is calculated by (Id * sinVal) */
-product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31);
-
-/* Intermediate product is calculated by (Iq * cosVal) */
-product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31);
-
-/* Calculate pIalpha by using the two intermediate products 1 and 2 */
-*pIalpha = __QSUB(product1, product2);
-
-/* Calculate pIbeta by using the two intermediate products 3 and 4 */
-*pIbeta = __QADD(product4, product3);
-}
-
-/**
- * @} end of Inverse park group
- */
-
-/**
- * @brief  Converts the elements of the Q31 vector to floating-point vector.
- * @param[in]  pSrc       is input pointer
- * @param[out] pDst       is output pointer
- * @param[in]  blockSize  is the number of samples to process
- */
-void arm_q31_to_float(q31_t * pSrc, float32_t * pDst, uint32_t blockSize);
-
-/**
- * @ingroup groupInterpolation
- */
-
-/**
- * @defgroup LinearInterpolate Linear Interpolation
- *
- * Linear interpolation is a method of curve fitting using linear polynomials.
- * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line
- *
- * \par
- * \image html LinearInterp.gif "Linear interpolation"
- *
- * \par
- * A  Linear Interpolate function calculates an output value(y), for the input(x)
- * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values)
- *
- * \par Algorithm:
- * <pre>
- *       y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
- *       where x0, x1 are nearest values of input x
- *             y0, y1 are nearest values to output y
- * </pre>
- *
- * \par
- * This set of functions implements Linear interpolation process
- * for Q7, Q15, Q31, and floating-point data types.  The functions operate on a single
- * sample of data and each call to the function returns a single processed value.
- * <code>S</code> points to an instance of the Linear Interpolate function data structure.
- * <code>x</code> is the input sample value. The functions returns the output value.
- *
- * \par
- * if x is outside of the table boundary, Linear interpolation returns first value of the table
- * if x is below input range and returns last value of table if x is above range.
- */
-
-/**
- * @addtogroup LinearInterpolate
- * @{
- */
-
-/**
- * @brief  Process function for the floating-point Linear Interpolation Function.
- * @param[in,out] S  is an instance of the floating-point Linear Interpolation structure
- * @param[in]     x  input sample to process
- * @return y processed output sample.
- *
- */
-static __INLINE float32_t arm_linear_interp_f32(
-	arm_linear_interp_instance_f32 * S,
-	float32_t x)
-{
-float32_t y;
-float32_t x0, x1; /* Nearest input values */
-float32_t y0, y1; /* Nearest output values */
-float32_t xSpacing = S->xSpacing; /* spacing between input values */
-int32_t i; /* Index variable */
-float32_t *pYData = S->pYData; /* pointer to output table */
-
-/* Calculation of index */
-i = (int32_t) ((x - S->x1) / xSpacing);
-
-if(i < 0)
-{
-	/* Iniatilize output for below specified range as least output value of table */
-	y = pYData[0];
-}
-else if((uint32_t)i >= S->nValues)
-{
-	/* Iniatilize output for above specified range as last output value of table */
-	y = pYData[S->nValues - 1];
-}
-else
-{
-	/* Calculation of nearest input values */
-	x0 = S->x1 + i * xSpacing;
-	x1 = S->x1 + (i + 1) * xSpacing;
-
-	/* Read of nearest output values */
-	y0 = pYData[i];
-	y1 = pYData[i + 1];
-
-	/* Calculation of output */
-	y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0));
-
-}
-
-/* returns output value */
-return (y);
-}
-
-/**
- *
- * @brief  Process function for the Q31 Linear Interpolation Function.
- * @param[in] pYData   pointer to Q31 Linear Interpolation table
- * @param[in] x        input sample to process
- * @param[in] nValues  number of table values
- * @return y processed output sample.
- *
- * \par
- * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
- * This function can support maximum of table size 2^12.
- *
- */
-static __INLINE q31_t arm_linear_interp_q31(
-	q31_t * pYData,
-	q31_t x,
-	uint32_t nValues)
-{
-q31_t y; /* output */
-q31_t y0, y1; /* Nearest output values */
-q31_t fract; /* fractional part */
-int32_t index; /* Index to read nearest output values */
-
-/* Input is in 12.20 format */
-/* 12 bits for the table index */
-/* Index value calculation */
-index = ((x & (q31_t)0xFFF00000) >> 20);
-
-if(index >= (int32_t)(nValues - 1))
-{
-	return (pYData[nValues - 1]);
-}
-else if(index < 0)
-{
-	return (pYData[0]);
-}
-else
-{
-	/* 20 bits for the fractional part */
-	/* shift left by 11 to keep fract in 1.31 format */
-	fract = (x & 0x000FFFFF) << 11;
-
-	/* Read two nearest output values from the index in 1.31(q31) format */
-	y0 = pYData[index];
-	y1 = pYData[index + 1];
-
-	/* Calculation of y0 * (1-fract) and y is in 2.30 format */
-	y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32));
-
-	/* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */
-	y += ((q31_t) (((q63_t) y1 * fract) >> 32));
-
-	/* Convert y to 1.31 format */
-	return (y << 1u);
-}
-}
-
-/**
- *
- * @brief  Process function for the Q15 Linear Interpolation Function.
- * @param[in] pYData   pointer to Q15 Linear Interpolation table
- * @param[in] x        input sample to process
- * @param[in] nValues  number of table values
- * @return y processed output sample.
- *
- * \par
- * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
- * This function can support maximum of table size 2^12.
- *
- */
-static __INLINE q15_t arm_linear_interp_q15(
-	q15_t * pYData,
-	q31_t x,
-	uint32_t nValues)
-{
-q63_t y; /* output */
-q15_t y0, y1; /* Nearest output values */
-q31_t fract; /* fractional part */
-int32_t index; /* Index to read nearest output values */
-
-/* Input is in 12.20 format */
-/* 12 bits for the table index */
-/* Index value calculation */
-index = ((x & (int32_t)0xFFF00000) >> 20);
-
-if(index >= (int32_t)(nValues - 1))
-{
-	return (pYData[nValues - 1]);
-}
-else if(index < 0)
-{
-	return (pYData[0]);
-}
-else
-{
-	/* 20 bits for the fractional part */
-	/* fract is in 12.20 format */
-	fract = (x & 0x000FFFFF);
-
-	/* Read two nearest output values from the index */
-	y0 = pYData[index];
-	y1 = pYData[index + 1];
-
-	/* Calculation of y0 * (1-fract) and y is in 13.35 format */
-	y = ((q63_t) y0 * (0xFFFFF - fract));
-
-	/* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */
-	y += ((q63_t) y1 * (fract));
-
-	/* convert y to 1.15 format */
-	return (q15_t) (y >> 20);
-}
-}
-
-/**
- *
- * @brief  Process function for the Q7 Linear Interpolation Function.
- * @param[in] pYData   pointer to Q7 Linear Interpolation table
- * @param[in] x        input sample to process
- * @param[in] nValues  number of table values
- * @return y processed output sample.
- *
- * \par
- * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
- * This function can support maximum of table size 2^12.
- */
-static __INLINE q7_t arm_linear_interp_q7(
-	q7_t * pYData,
-	q31_t x,
-	uint32_t nValues)
-{
-q31_t y; /* output */
-q7_t y0, y1; /* Nearest output values */
-q31_t fract; /* fractional part */
-uint32_t index; /* Index to read nearest output values */
-
-/* Input is in 12.20 format */
-/* 12 bits for the table index */
-/* Index value calculation */
-if (x < 0)
-{
-	return (pYData[0]);
-}
-index = (x >> 20) & 0xfff;
-
-if(index >= (nValues - 1))
-{
-	return (pYData[nValues - 1]);
-}
-else
-{
-	/* 20 bits for the fractional part */
-	/* fract is in 12.20 format */
-	fract = (x & 0x000FFFFF);
-
-	/* Read two nearest output values from the index and are in 1.7(q7) format */
-	y0 = pYData[index];
-	y1 = pYData[index + 1];
-
-	/* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */
-	y = ((y0 * (0xFFFFF - fract)));
-
-	/* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */
-	y += (y1 * fract);
-
-	/* convert y to 1.7(q7) format */
-	return (q7_t) (y >> 20);
-}
-}
-
-/**
- * @} end of LinearInterpolate group
- */
-
-/**
- * @brief  Fast approximation to the trigonometric sine function for floating-point data.
- * @param[in] x  input value in radians.
- * @return  sin(x).
- */
-float32_t arm_sin_f32(float32_t x);
-
-/**
- * @brief  Fast approximation to the trigonometric sine function for Q31 data.
- * @param[in] x  Scaled input value in radians.
- * @return  sin(x).
- */
-q31_t arm_sin_q31(q31_t x);
-
-/**
- * @brief  Fast approximation to the trigonometric sine function for Q15 data.
- * @param[in] x  Scaled input value in radians.
- * @return  sin(x).
- */
-q15_t arm_sin_q15(q15_t x);
-
-/**
- * @brief  Fast approximation to the trigonometric cosine function for floating-point data.
- * @param[in] x  input value in radians.
- * @return  cos(x).
- */
-float32_t arm_cos_f32(float32_t x);
-
-/**
- * @brief Fast approximation to the trigonometric cosine function for Q31 data.
- * @param[in] x  Scaled input value in radians.
- * @return  cos(x).
- */
-q31_t arm_cos_q31(q31_t x);
-
-/**
- * @brief  Fast approximation to the trigonometric cosine function for Q15 data.
- * @param[in] x  Scaled input value in radians.
- * @return  cos(x).
- */
-q15_t arm_cos_q15(q15_t x);
-
-/**
- * @ingroup groupFastMath
- */
-
-/**
- * @defgroup SQRT Square Root
- *
- * Computes the square root of a number.
- * There are separate functions for Q15, Q31, and floating-point data types.
- * The square root function is computed using the Newton-Raphson algorithm.
- * This is an iterative algorithm of the form:
- * <pre>
- *      x1 = x0 - f(x0)/f'(x0)
- * </pre>
- * where <code>x1</code> is the current estimate,
- * <code>x0</code> is the previous estimate, and
- * <code>f'(x0)</code> is the derivative of <code>f()</code> evaluated at <code>x0</code>.
- * For the square root function, the algorithm reduces to:
- * <pre>
- *     x0 = in/2                         [initial guess]
- *     x1 = 1/2 * ( x0 + in / x0)        [each iteration]
- * </pre>
- */
-
-/**
- * @addtogroup SQRT
- * @{
- */
-
-/**
- * @brief  Floating-point square root function.
- * @param[in]  in    input value.
- * @param[out] pOut  square root of input value.
- * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
- * <code>in</code> is negative value and returns zero output for negative values.
- */
-static __INLINE arm_status arm_sqrt_f32(
-	float32_t in,
-	float32_t * pOut)
-{
-if(in >= 0.0f)
-{
-
-#if   (__FPU_USED == 1) && defined ( __CC_ARM   )
-	*pOut = __sqrtf(in);
-#elif (__FPU_USED == 1) && (defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
-	*pOut = __builtin_sqrtf(in);
-#elif (__FPU_USED == 1) && defined(__GNUC__)
-	*pOut = __builtin_sqrtf(in);
-#elif (__FPU_USED == 1) && defined ( __ICCARM__ ) && (__VER__ >= 6040000)
-	__ASM("VSQRT.F32 %0,%1" : "=t"(*pOut) : "t"(in));
-#else
-	*pOut = sqrtf(in);
-#endif
-
-	return (ARM_MATH_SUCCESS);
-}
-else
-{
-	*pOut = 0.0f;
-	return (ARM_MATH_ARGUMENT_ERROR);
-}
-}
-
-/**
- * @brief Q31 square root function.
- * @param[in]  in    input value.  The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF.
- * @param[out] pOut  square root of input value.
- * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
- * <code>in</code> is negative value and returns zero output for negative values.
- */
-arm_status arm_sqrt_q31(q31_t in, q31_t * pOut);
-
-/**
- * @brief  Q15 square root function.
- * @param[in]  in    input value.  The range of the input value is [0 +1) or 0x0000 to 0x7FFF.
- * @param[out] pOut  square root of input value.
- * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
- * <code>in</code> is negative value and returns zero output for negative values.
- */
-arm_status arm_sqrt_q15(q15_t in, q15_t * pOut);
-
-/**
- * @} end of SQRT group
- */
-
-/**
- * @brief floating-point Circular write function.
- */
-static __INLINE void arm_circularWrite_f32(
-	int32_t * circBuffer,
-	int32_t L,
-	uint16_t * writeOffset,
-	int32_t bufferInc,
-	const int32_t * src,
-	int32_t srcInc,
-	uint32_t blockSize)
-{
-uint32_t i = 0u;
-int32_t wOffset;
-
-/* Copy the value of Index pointer that points
- * to the current location where the input samples to be copied */
-wOffset = *writeOffset;
-
-/* Loop over the blockSize */
-i = blockSize;
-
-while(i > 0u)
-{
-	/* copy the input sample to the circular buffer */
-	circBuffer[wOffset] = *src;
-
-	/* Update the input pointer */
-	src += srcInc;
-
-	/* Circularly update wOffset.  Watch out for positive and negative value */
-	wOffset += bufferInc;
-	if(wOffset >= L)
-	wOffset -= L;
-
-	/* Decrement the loop counter */
-	i--;
-}
-
-/* Update the index pointer */
-*writeOffset = (uint16_t)wOffset;
-}
-
-/**
- * @brief floating-point Circular Read function.
- */
-static __INLINE void arm_circularRead_f32(
-	int32_t * circBuffer,
-	int32_t L,
-	int32_t * readOffset,
-	int32_t bufferInc,
-	int32_t * dst,
-	int32_t * dst_base,
-	int32_t dst_length,
-	int32_t dstInc,
-	uint32_t blockSize)
-{
-uint32_t i = 0u;
-int32_t rOffset, dst_end;
-
-/* Copy the value of Index pointer that points
- * to the current location from where the input samples to be read */
-rOffset = *readOffset;
-dst_end = (int32_t) (dst_base + dst_length);
-
-/* Loop over the blockSize */
-i = blockSize;
-
-while(i > 0u)
-{
-	/* copy the sample from the circular buffer to the destination buffer */
-	*dst = circBuffer[rOffset];
-
-	/* Update the input pointer */
-	dst += dstInc;
-
-	if(dst == (int32_t *) dst_end)
-	{
-		dst = dst_base;
-	}
-
-	/* Circularly update rOffset.  Watch out for positive and negative value  */
-	rOffset += bufferInc;
-
-	if(rOffset >= L)
-	{
-		rOffset -= L;
-	}
-
-	/* Decrement the loop counter */
-	i--;
-}
-
-/* Update the index pointer */
-*readOffset = rOffset;
-}
-
-/**
- * @brief Q15 Circular write function.
- */
-static __INLINE void arm_circularWrite_q15(
-	q15_t * circBuffer,
-	int32_t L,
-	uint16_t * writeOffset,
-	int32_t bufferInc,
-	const q15_t * src,
-	int32_t srcInc,
-	uint32_t blockSize)
-{
-uint32_t i = 0u;
-int32_t wOffset;
-
-/* Copy the value of Index pointer that points
- * to the current location where the input samples to be copied */
-wOffset = *writeOffset;
-
-/* Loop over the blockSize */
-i = blockSize;
-
-while(i > 0u)
-{
-	/* copy the input sample to the circular buffer */
-	circBuffer[wOffset] = *src;
-
-	/* Update the input pointer */
-	src += srcInc;
-
-	/* Circularly update wOffset.  Watch out for positive and negative value */
-	wOffset += bufferInc;
-	if(wOffset >= L)
-	wOffset -= L;
-
-	/* Decrement the loop counter */
-	i--;
-}
-
-/* Update the index pointer */
-*writeOffset = (uint16_t)wOffset;
-}
-
-/**
- * @brief Q15 Circular Read function.
- */
-static __INLINE void arm_circularRead_q15(
-	q15_t * circBuffer,
-	int32_t L,
-	int32_t * readOffset,
-	int32_t bufferInc,
-	q15_t * dst,
-	q15_t * dst_base,
-	int32_t dst_length,
-	int32_t dstInc,
-	uint32_t blockSize)
-{
-uint32_t i = 0;
-int32_t rOffset, dst_end;
-
-/* Copy the value of Index pointer that points
- * to the current location from where the input samples to be read */
-rOffset = *readOffset;
-
-dst_end = (int32_t) (dst_base + dst_length);
-
-/* Loop over the blockSize */
-i = blockSize;
-
-while(i > 0u)
-{
-	/* copy the sample from the circular buffer to the destination buffer */
-	*dst = circBuffer[rOffset];
-
-	/* Update the input pointer */
-	dst += dstInc;
-
-	if(dst == (q15_t *) dst_end)
-	{
-		dst = dst_base;
-	}
-
-	/* Circularly update wOffset.  Watch out for positive and negative value */
-	rOffset += bufferInc;
-
-	if(rOffset >= L)
-	{
-		rOffset -= L;
-	}
-
-	/* Decrement the loop counter */
-	i--;
-}
-
-/* Update the index pointer */
-*readOffset = rOffset;
-}
-
-/**
- * @brief Q7 Circular write function.
- */
-static __INLINE void arm_circularWrite_q7(
-	q7_t * circBuffer,
-	int32_t L,
-	uint16_t * writeOffset,
-	int32_t bufferInc,
-	const q7_t * src,
-	int32_t srcInc,
-	uint32_t blockSize)
-{
-uint32_t i = 0u;
-int32_t wOffset;
-
-/* Copy the value of Index pointer that points
- * to the current location where the input samples to be copied */
-wOffset = *writeOffset;
-
-/* Loop over the blockSize */
-i = blockSize;
-
-while(i > 0u)
-{
-	/* copy the input sample to the circular buffer */
-	circBuffer[wOffset] = *src;
-
-	/* Update the input pointer */
-	src += srcInc;
-
-	/* Circularly update wOffset.  Watch out for positive and negative value */
-	wOffset += bufferInc;
-	if(wOffset >= L)
-	wOffset -= L;
-
-	/* Decrement the loop counter */
-	i--;
-}
-
-/* Update the index pointer */
-*writeOffset = (uint16_t)wOffset;
-}
-
-/**
- * @brief Q7 Circular Read function.
- */
-static __INLINE void arm_circularRead_q7(
-	q7_t * circBuffer,
-	int32_t L,
-	int32_t * readOffset,
-	int32_t bufferInc,
-	q7_t * dst,
-	q7_t * dst_base,
-	int32_t dst_length,
-	int32_t dstInc,
-	uint32_t blockSize)
-{
-uint32_t i = 0;
-int32_t rOffset, dst_end;
-
-/* Copy the value of Index pointer that points
- * to the current location from where the input samples to be read */
-rOffset = *readOffset;
-
-dst_end = (int32_t) (dst_base + dst_length);
-
-/* Loop over the blockSize */
-i = blockSize;
-
-while(i > 0u)
-{
-	/* copy the sample from the circular buffer to the destination buffer */
-	*dst = circBuffer[rOffset];
-
-	/* Update the input pointer */
-	dst += dstInc;
-
-	if(dst == (q7_t *) dst_end)
-	{
-		dst = dst_base;
-	}
-
-	/* Circularly update rOffset.  Watch out for positive and negative value */
-	rOffset += bufferInc;
-
-	if(rOffset >= L)
-	{
-		rOffset -= L;
-	}
-
-	/* Decrement the loop counter */
-	i--;
-}
-
-/* Update the index pointer */
-*readOffset = rOffset;
-}
-
-/**
- * @brief  Sum of the squares of the elements of a Q31 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_power_q31(q31_t * pSrc, uint32_t blockSize, q63_t * pResult);
-
-/**
- * @brief  Sum of the squares of the elements of a floating-point vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_power_f32(float32_t * pSrc, uint32_t blockSize, float32_t * pResult);
-
-/**
- * @brief  Sum of the squares of the elements of a Q15 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_power_q15(q15_t * pSrc, uint32_t blockSize, q63_t * pResult);
-
-/**
- * @brief  Sum of the squares of the elements of a Q7 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_power_q7(q7_t * pSrc, uint32_t blockSize, q31_t * pResult);
-
-/**
- * @brief  Mean value of a Q7 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_mean_q7(q7_t * pSrc, uint32_t blockSize, q7_t * pResult);
-
-/**
- * @brief  Mean value of a Q15 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_mean_q15(q15_t * pSrc, uint32_t blockSize, q15_t * pResult);
-
-/**
- * @brief  Mean value of a Q31 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_mean_q31(q31_t * pSrc, uint32_t blockSize, q31_t * pResult);
-
-/**
- * @brief  Mean value of a floating-point vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_mean_f32(float32_t * pSrc, uint32_t blockSize, float32_t * pResult);
-
-/**
- * @brief  Variance of the elements of a floating-point vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_var_f32(float32_t * pSrc, uint32_t blockSize, float32_t * pResult);
-
-/**
- * @brief  Variance of the elements of a Q31 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_var_q31(q31_t * pSrc, uint32_t blockSize, q31_t * pResult);
-
-/**
- * @brief  Variance of the elements of a Q15 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_var_q15(q15_t * pSrc, uint32_t blockSize, q15_t * pResult);
-
-/**
- * @brief  Root Mean Square of the elements of a floating-point vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_rms_f32(float32_t * pSrc, uint32_t blockSize, float32_t * pResult);
-
-/**
- * @brief  Root Mean Square of the elements of a Q31 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_rms_q31(q31_t * pSrc, uint32_t blockSize, q31_t * pResult);
-
-/**
- * @brief  Root Mean Square of the elements of a Q15 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_rms_q15(q15_t * pSrc, uint32_t blockSize, q15_t * pResult);
-
-/**
- * @brief  Standard deviation of the elements of a floating-point vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_std_f32(float32_t * pSrc, uint32_t blockSize, float32_t * pResult);
-
-/**
- * @brief  Standard deviation of the elements of a Q31 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_std_q31(q31_t * pSrc, uint32_t blockSize, q31_t * pResult);
-
-/**
- * @brief  Standard deviation of the elements of a Q15 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output value.
- */
-void arm_std_q15(q15_t * pSrc, uint32_t blockSize, q15_t * pResult);
-
-/**
- * @brief  Floating-point complex magnitude
- * @param[in]  pSrc        points to the complex input vector
- * @param[out] pDst        points to the real output vector
- * @param[in]  numSamples  number of complex samples in the input vector
- */
-void arm_cmplx_mag_f32(float32_t * pSrc, float32_t * pDst, uint32_t numSamples);
-
-/**
- * @brief  Q31 complex magnitude
- * @param[in]  pSrc        points to the complex input vector
- * @param[out] pDst        points to the real output vector
- * @param[in]  numSamples  number of complex samples in the input vector
- */
-void arm_cmplx_mag_q31(q31_t * pSrc, q31_t * pDst, uint32_t numSamples);
-
-/**
- * @brief  Q15 complex magnitude
- * @param[in]  pSrc        points to the complex input vector
- * @param[out] pDst        points to the real output vector
- * @param[in]  numSamples  number of complex samples in the input vector
- */
-void arm_cmplx_mag_q15(q15_t * pSrc, q15_t * pDst, uint32_t numSamples);
-
-/**
- * @brief  Q15 complex dot product
- * @param[in]  pSrcA       points to the first input vector
- * @param[in]  pSrcB       points to the second input vector
- * @param[in]  numSamples  number of complex samples in each vector
- * @param[out] realResult  real part of the result returned here
- * @param[out] imagResult  imaginary part of the result returned here
- */
-void arm_cmplx_dot_prod_q15(q15_t * pSrcA, q15_t * pSrcB, uint32_t numSamples,
-	q31_t * realResult, q31_t * imagResult);
-
-/**
- * @brief  Q31 complex dot product
- * @param[in]  pSrcA       points to the first input vector
- * @param[in]  pSrcB       points to the second input vector
- * @param[in]  numSamples  number of complex samples in each vector
- * @param[out] realResult  real part of the result returned here
- * @param[out] imagResult  imaginary part of the result returned here
- */
-void arm_cmplx_dot_prod_q31(q31_t * pSrcA, q31_t * pSrcB, uint32_t numSamples,
-	q63_t * realResult, q63_t * imagResult);
-
-/**
- * @brief  Floating-point complex dot product
- * @param[in]  pSrcA       points to the first input vector
- * @param[in]  pSrcB       points to the second input vector
- * @param[in]  numSamples  number of complex samples in each vector
- * @param[out] realResult  real part of the result returned here
- * @param[out] imagResult  imaginary part of the result returned here
- */
-void arm_cmplx_dot_prod_f32(float32_t * pSrcA, float32_t * pSrcB,
-	uint32_t numSamples, float32_t * realResult, float32_t * imagResult);
-
-/**
- * @brief  Q15 complex-by-real multiplication
- * @param[in]  pSrcCmplx   points to the complex input vector
- * @param[in]  pSrcReal    points to the real input vector
- * @param[out] pCmplxDst   points to the complex output vector
- * @param[in]  numSamples  number of samples in each vector
- */
-void arm_cmplx_mult_real_q15(q15_t * pSrcCmplx, q15_t * pSrcReal,
-	q15_t * pCmplxDst, uint32_t numSamples);
-
-/**
- * @brief  Q31 complex-by-real multiplication
- * @param[in]  pSrcCmplx   points to the complex input vector
- * @param[in]  pSrcReal    points to the real input vector
- * @param[out] pCmplxDst   points to the complex output vector
- * @param[in]  numSamples  number of samples in each vector
- */
-void arm_cmplx_mult_real_q31(q31_t * pSrcCmplx, q31_t * pSrcReal,
-	q31_t * pCmplxDst, uint32_t numSamples);
-
-/**
- * @brief  Floating-point complex-by-real multiplication
- * @param[in]  pSrcCmplx   points to the complex input vector
- * @param[in]  pSrcReal    points to the real input vector
- * @param[out] pCmplxDst   points to the complex output vector
- * @param[in]  numSamples  number of samples in each vector
- */
-void arm_cmplx_mult_real_f32(float32_t * pSrcCmplx, float32_t * pSrcReal,
-	float32_t * pCmplxDst, uint32_t numSamples);
-
-/**
- * @brief  Minimum value of a Q7 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] result     is output pointer
- * @param[in]  index      is the array index of the minimum value in the input buffer.
- */
-void arm_min_q7(q7_t * pSrc, uint32_t blockSize, q7_t * result,
-	uint32_t * index);
-
-/**
- * @brief  Minimum value of a Q15 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output pointer
- * @param[in]  pIndex     is the array index of the minimum value in the input buffer.
- */
-void arm_min_q15(q15_t * pSrc, uint32_t blockSize, q15_t * pResult,
-	uint32_t * pIndex);
-
-/**
- * @brief  Minimum value of a Q31 vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output pointer
- * @param[out] pIndex     is the array index of the minimum value in the input buffer.
- */
-void arm_min_q31(q31_t * pSrc, uint32_t blockSize, q31_t * pResult,
-	uint32_t * pIndex);
-
-/**
- * @brief  Minimum value of a floating-point vector.
- * @param[in]  pSrc       is input pointer
- * @param[in]  blockSize  is the number of samples to process
- * @param[out] pResult    is output pointer
- * @param[out] pIndex     is the array index of the minimum value in the input buffer.
- */
-void arm_min_f32(float32_t * pSrc, uint32_t blockSize, float32_t * pResult,
-	uint32_t * pIndex);
-
-/**
- * @brief Maximum value of a Q7 vector.
- * @param[in]  pSrc       points to the input buffer
- * @param[in]  blockSize  length of the input vector
- * @param[out] pResult    maximum value returned here
- * @param[out] pIndex     index of maximum value returned here
- */
-void arm_max_q7(q7_t * pSrc, uint32_t blockSize, q7_t * pResult,
-	uint32_t * pIndex);
-
-/**
- * @brief Maximum value of a Q15 vector.
- * @param[in]  pSrc       points to the input buffer
- * @param[in]  blockSize  length of the input vector
- * @param[out] pResult    maximum value returned here
- * @param[out] pIndex     index of maximum value returned here
- */
-void arm_max_q15(q15_t * pSrc, uint32_t blockSize, q15_t * pResult,
-	uint32_t * pIndex);
-
-/**
- * @brief Maximum value of a Q31 vector.
- * @param[in]  pSrc       points to the input buffer
- * @param[in]  blockSize  length of the input vector
- * @param[out] pResult    maximum value returned here
- * @param[out] pIndex     index of maximum value returned here
- */
-void arm_max_q31(q31_t * pSrc, uint32_t blockSize, q31_t * pResult,
-	uint32_t * pIndex);
-
-/**
- * @brief Maximum value of a floating-point vector.
- * @param[in]  pSrc       points to the input buffer
- * @param[in]  blockSize  length of the input vector
- * @param[out] pResult    maximum value returned here
- * @param[out] pIndex     index of maximum value returned here
- */
-void arm_max_f32(float32_t * pSrc, uint32_t blockSize, float32_t * pResult,
-	uint32_t * pIndex);
-
-/**
- * @brief  Q15 complex-by-complex multiplication
- * @param[in]  pSrcA       points to the first input vector
- * @param[in]  pSrcB       points to the second input vector
- * @param[out] pDst        points to the output vector
- * @param[in]  numSamples  number of complex samples in each vector
- */
-void arm_cmplx_mult_cmplx_q15(q15_t * pSrcA, q15_t * pSrcB, q15_t * pDst,
-	uint32_t numSamples);
-
-/**
- * @brief  Q31 complex-by-complex multiplication
- * @param[in]  pSrcA       points to the first input vector
- * @param[in]  pSrcB       points to the second input vector
- * @param[out] pDst        points to the output vector
- * @param[in]  numSamples  number of complex samples in each vector
- */
-void arm_cmplx_mult_cmplx_q31(q31_t * pSrcA, q31_t * pSrcB, q31_t * pDst,
-	uint32_t numSamples);
-
-/**
- * @brief  Floating-point complex-by-complex multiplication
- * @param[in]  pSrcA       points to the first input vector
- * @param[in]  pSrcB       points to the second input vector
- * @param[out] pDst        points to the output vector
- * @param[in]  numSamples  number of complex samples in each vector
- */
-void arm_cmplx_mult_cmplx_f32(float32_t * pSrcA, float32_t * pSrcB,
-	float32_t * pDst, uint32_t numSamples);
-
-/**
- * @brief Converts the elements of the floating-point vector to Q31 vector.
- * @param[in]  pSrc       points to the floating-point input vector
- * @param[out] pDst       points to the Q31 output vector
- * @param[in]  blockSize  length of the input vector
- */
-void arm_float_to_q31(float32_t * pSrc, q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Converts the elements of the floating-point vector to Q15 vector.
- * @param[in]  pSrc       points to the floating-point input vector
- * @param[out] pDst       points to the Q15 output vector
- * @param[in]  blockSize  length of the input vector
- */
-void arm_float_to_q15(float32_t * pSrc, q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief Converts the elements of the floating-point vector to Q7 vector.
- * @param[in]  pSrc       points to the floating-point input vector
- * @param[out] pDst       points to the Q7 output vector
- * @param[in]  blockSize  length of the input vector
- */
-void arm_float_to_q7(float32_t * pSrc, q7_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Converts the elements of the Q31 vector to Q15 vector.
- * @param[in]  pSrc       is input pointer
- * @param[out] pDst       is output pointer
- * @param[in]  blockSize  is the number of samples to process
- */
-void arm_q31_to_q15(q31_t * pSrc, q15_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Converts the elements of the Q31 vector to Q7 vector.
- * @param[in]  pSrc       is input pointer
- * @param[out] pDst       is output pointer
- * @param[in]  blockSize  is the number of samples to process
- */
-void arm_q31_to_q7(q31_t * pSrc, q7_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Converts the elements of the Q15 vector to floating-point vector.
- * @param[in]  pSrc       is input pointer
- * @param[out] pDst       is output pointer
- * @param[in]  blockSize  is the number of samples to process
- */
-void arm_q15_to_float(q15_t * pSrc, float32_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Converts the elements of the Q15 vector to Q31 vector.
- * @param[in]  pSrc       is input pointer
- * @param[out] pDst       is output pointer
- * @param[in]  blockSize  is the number of samples to process
- */
-void arm_q15_to_q31(q15_t * pSrc, q31_t * pDst, uint32_t blockSize);
-
-/**
- * @brief  Converts the elements of the Q15 vector to Q7 vector.
- * @param[in]  pSrc       is input pointer
- * @param[out] pDst       is output pointer
- * @param[in]  blockSize  is the number of samples to process
- */
-void arm_q15_to_q7(q15_t * pSrc, q7_t * pDst, uint32_t blockSize);
-
-/**
- * @ingroup groupInterpolation
- */
-
-/**
- * @defgroup BilinearInterpolate Bilinear Interpolation
- *
- * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid.
- * The underlying function <code>f(x, y)</code> is sampled on a regular grid and the interpolation process
- * determines values between the grid points.
- * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension.
- * Bilinear interpolation is often used in image processing to rescale images.
- * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types.
- *
- * <b>Algorithm</b>
- * \par
- * The instance structure used by the bilinear interpolation functions describes a two dimensional data table.
- * For floating-point, the instance structure is defined as:
- * <pre>
- *   typedef struct
- *   {
- *     uint16_t numRows;
- *     uint16_t numCols;
- *     float32_t *pData;
- * } arm_bilinear_interp_instance_f32;
- * </pre>
- *
- * \par
- * where <code>numRows</code> specifies the number of rows in the table;
- * <code>numCols</code> specifies the number of columns in the table;
- * and <code>pData</code> points to an array of size <code>numRows*numCols</code> values.
- * The data table <code>pTable</code> is organized in row order and the supplied data values fall on integer indexes.
- * That is, table element (x,y) is located at <code>pTable[x + y*numCols]</code> where x and y are integers.
- *
- * \par
- * Let <code>(x, y)</code> specify the desired interpolation point.  Then define:
- * <pre>
- *     XF = floor(x)
- *     YF = floor(y)
- * </pre>
- * \par
- * The interpolated output point is computed as:
- * <pre>
- *  f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
- *           + f(XF+1, YF) * (x-XF)*(1-(y-YF))
- *           + f(XF, YF+1) * (1-(x-XF))*(y-YF)
- *           + f(XF+1, YF+1) * (x-XF)*(y-YF)
- * </pre>
- * Note that the coordinates (x, y) contain integer and fractional components.
- * The integer components specify which portion of the table to use while the
- * fractional components control the interpolation processor.
- *
- * \par
- * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output.
- */
-
-/**
- * @addtogroup BilinearInterpolate
- * @{
- */
-
-/**
- *
- * @brief  Floating-point bilinear interpolation.
- * @param[in,out] S  points to an instance of the interpolation structure.
- * @param[in]     X  interpolation coordinate.
- * @param[in]     Y  interpolation coordinate.
- * @return out interpolated value.
- */
-static __INLINE float32_t arm_bilinear_interp_f32(
-	const arm_bilinear_interp_instance_f32 * S,
-	float32_t X,
-	float32_t Y)
-{
-float32_t out;
-float32_t f00, f01, f10, f11;
-float32_t *pData = S->pData;
-int32_t xIndex, yIndex, index;
-float32_t xdiff, ydiff;
-float32_t b1, b2, b3, b4;
-
-xIndex = (int32_t) X;
-yIndex = (int32_t) Y;
-
-/* Care taken for table outside boundary */
-/* Returns zero output when values are outside table boundary */
-if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0 || yIndex > (S->numCols - 1))
-{
-	return (0);
-}
-
-/* Calculation of index for two nearest points in X-direction */
-index = (xIndex - 1) + (yIndex - 1) * S->numCols;
-
-/* Read two nearest points in X-direction */
-f00 = pData[index];
-f01 = pData[index + 1];
-
-/* Calculation of index for two nearest points in Y-direction */
-index = (xIndex - 1) + (yIndex) * S->numCols;
-
-/* Read two nearest points in Y-direction */
-f10 = pData[index];
-f11 = pData[index + 1];
-
-/* Calculation of intermediate values */
-b1 = f00;
-b2 = f01 - f00;
-b3 = f10 - f00;
-b4 = f00 - f01 - f10 + f11;
-
-/* Calculation of fractional part in X */
-xdiff = X - xIndex;
-
-/* Calculation of fractional part in Y */
-ydiff = Y - yIndex;
-
-/* Calculation of bi-linear interpolated output */
-out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff;
-
-/* return to application */
-return (out);
-}
-
-/**
- *
- * @brief  Q31 bilinear interpolation.
- * @param[in,out] S  points to an instance of the interpolation structure.
- * @param[in]     X  interpolation coordinate in 12.20 format.
- * @param[in]     Y  interpolation coordinate in 12.20 format.
- * @return out interpolated value.
- */
-static __INLINE q31_t arm_bilinear_interp_q31(
-	arm_bilinear_interp_instance_q31 * S,
-	q31_t X,
-	q31_t Y)
-{
-q31_t out; /* Temporary output */
-q31_t acc = 0; /* output */
-q31_t xfract, yfract; /* X, Y fractional parts */
-q31_t x1, x2, y1, y2; /* Nearest output values */
-int32_t rI, cI; /* Row and column indices */
-q31_t *pYData = S->pData; /* pointer to output table values */
-uint32_t nCols = S->numCols; /* num of rows */
-
-/* Input is in 12.20 format */
-/* 12 bits for the table index */
-/* Index value calculation */
-rI = ((X & (q31_t)0xFFF00000) >> 20);
-
-/* Input is in 12.20 format */
-/* 12 bits for the table index */
-/* Index value calculation */
-cI = ((Y & (q31_t)0xFFF00000) >> 20);
-
-/* Care taken for table outside boundary */
-/* Returns zero output when values are outside table boundary */
-if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
-{
-	return (0);
-}
-
-/* 20 bits for the fractional part */
-/* shift left xfract by 11 to keep 1.31 format */
-xfract = (X & 0x000FFFFF) << 11u;
-
-/* Read two nearest output values from the index */
-x1 = pYData[(rI) + (int32_t)nCols * (cI) ];
-x2 = pYData[(rI) + (int32_t)nCols * (cI) + 1];
-
-/* 20 bits for the fractional part */
-/* shift left yfract by 11 to keep 1.31 format */
-yfract = (Y & 0x000FFFFF) << 11u;
-
-/* Read two nearest output values from the index */
-y1 = pYData[(rI) + (int32_t)nCols * (cI + 1) ];
-y2 = pYData[(rI) + (int32_t)nCols * (cI + 1) + 1];
-
-/* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */
-out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32));
-acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32));
-
-/* x2 * (xfract) * (1-yfract)  in 3.29(q29) and adding to acc */
-out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32));
-acc += ((q31_t) ((q63_t) out * (xfract) >> 32));
-
-/* y1 * (1 - xfract) * (yfract)  in 3.29(q29) and adding to acc */
-out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32));
-acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
-
-/* y2 * (xfract) * (yfract)  in 3.29(q29) and adding to acc */
-out = ((q31_t) ((q63_t) y2 * (xfract) >> 32));
-acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
-
-/* Convert acc to 1.31(q31) format */
-return ((q31_t)(acc << 2));
-}
-
-/**
- * @brief  Q15 bilinear interpolation.
- * @param[in,out] S  points to an instance of the interpolation structure.
- * @param[in]     X  interpolation coordinate in 12.20 format.
- * @param[in]     Y  interpolation coordinate in 12.20 format.
- * @return out interpolated value.
- */
-static __INLINE q15_t arm_bilinear_interp_q15(
-	arm_bilinear_interp_instance_q15 * S,
-	q31_t X,
-	q31_t Y)
-{
-q63_t acc = 0; /* output */
-q31_t out; /* Temporary output */
-q15_t x1, x2, y1, y2; /* Nearest output values */
-q31_t xfract, yfract; /* X, Y fractional parts */
-int32_t rI, cI; /* Row and column indices */
-q15_t *pYData = S->pData; /* pointer to output table values */
-uint32_t nCols = S->numCols; /* num of rows */
-
-/* Input is in 12.20 format */
-/* 12 bits for the table index */
-/* Index value calculation */
-rI = ((X & (q31_t)0xFFF00000) >> 20);
-
-/* Input is in 12.20 format */
-/* 12 bits for the table index */
-/* Index value calculation */
-cI = ((Y & (q31_t)0xFFF00000) >> 20);
-
-/* Care taken for table outside boundary */
-/* Returns zero output when values are outside table boundary */
-if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
-{
-	return (0);
-}
-
-/* 20 bits for the fractional part */
-/* xfract should be in 12.20 format */
-xfract = (X & 0x000FFFFF);
-
-/* Read two nearest output values from the index */
-x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ];
-x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1];
-
-/* 20 bits for the fractional part */
-/* yfract should be in 12.20 format */
-yfract = (Y & 0x000FFFFF);
-
-/* Read two nearest output values from the index */
-y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ];
-y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1];
-
-/* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */
-
-/* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */
-/* convert 13.35 to 13.31 by right shifting  and out is in 1.31 */
-out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u);
-acc = ((q63_t) out * (0xFFFFF - yfract));
-
-/* x2 * (xfract) * (1-yfract)  in 1.51 and adding to acc */
-out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u);
-acc += ((q63_t) out * (xfract));
-
-/* y1 * (1 - xfract) * (yfract)  in 1.51 and adding to acc */
-out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u);
-acc += ((q63_t) out * (yfract));
-
-/* y2 * (xfract) * (yfract)  in 1.51 and adding to acc */
-out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u);
-acc += ((q63_t) out * (yfract));
-
-/* acc is in 13.51 format and down shift acc by 36 times */
-/* Convert out to 1.15 format */
-return ((q15_t)(acc >> 36));
-}
-
-/**
- * @brief  Q7 bilinear interpolation.
- * @param[in,out] S  points to an instance of the interpolation structure.
- * @param[in]     X  interpolation coordinate in 12.20 format.
- * @param[in]     Y  interpolation coordinate in 12.20 format.
- * @return out interpolated value.
- */
-static __INLINE q7_t arm_bilinear_interp_q7(
-	arm_bilinear_interp_instance_q7 * S,
-	q31_t X,
-	q31_t Y)
-{
-q63_t acc = 0; /* output */
-q31_t out; /* Temporary output */
-q31_t xfract, yfract; /* X, Y fractional parts */
-q7_t x1, x2, y1, y2; /* Nearest output values */
-int32_t rI, cI; /* Row and column indices */
-q7_t *pYData = S->pData; /* pointer to output table values */
-uint32_t nCols = S->numCols; /* num of rows */
-
-/* Input is in 12.20 format */
-/* 12 bits for the table index */
-/* Index value calculation */
-rI = ((X & (q31_t)0xFFF00000) >> 20);
-
-/* Input is in 12.20 format */
-/* 12 bits for the table index */
-/* Index value calculation */
-cI = ((Y & (q31_t)0xFFF00000) >> 20);
-
-/* Care taken for table outside boundary */
-/* Returns zero output when values are outside table boundary */
-if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
-{
-	return (0);
-}
-
-/* 20 bits for the fractional part */
-/* xfract should be in 12.20 format */
-xfract = (X & (q31_t)0x000FFFFF);
-
-/* Read two nearest output values from the index */
-x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ];
-x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1];
-
-/* 20 bits for the fractional part */
-/* yfract should be in 12.20 format */
-yfract = (Y & (q31_t)0x000FFFFF);
-
-/* Read two nearest output values from the index */
-y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ];
-y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1];
-
-/* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */
-out = ((x1 * (0xFFFFF - xfract)));
-acc = (((q63_t) out * (0xFFFFF - yfract)));
-
-/* x2 * (xfract) * (1-yfract)  in 2.22 and adding to acc */
-out = ((x2 * (0xFFFFF - yfract)));
-acc += (((q63_t) out * (xfract)));
-
-/* y1 * (1 - xfract) * (yfract)  in 2.22 and adding to acc */
-out = ((y1 * (0xFFFFF - xfract)));
-acc += (((q63_t) out * (yfract)));
-
-/* y2 * (xfract) * (yfract)  in 2.22 and adding to acc */
-out = ((y2 * (yfract)));
-acc += (((q63_t) out * (xfract)));
-
-/* acc in 16.47 format and down shift by 40 to convert to 1.7 format */
-return ((q7_t)(acc >> 40));
-}
-
-/**
- * @} end of BilinearInterpolate group
- */
-
-/* SMMLAR */
-#define multAcc_32x32_keep32_R(a, x, y) \
-    a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32)
-
-/* SMMLSR */
-#define multSub_32x32_keep32_R(a, x, y) \
-    a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32)
-
-/* SMMULR */
-#define mult_32x32_keep32_R(a, x, y) \
-    a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32)
-
-/* SMMLA */
-#define multAcc_32x32_keep32(a, x, y) \
-    a += (q31_t) (((q63_t) x * y) >> 32)
-
-/* SMMLS */
-#define multSub_32x32_keep32(a, x, y) \
-    a -= (q31_t) (((q63_t) x * y) >> 32)
-
-/* SMMUL */
-#define mult_32x32_keep32(a, x, y) \
-    a = (q31_t) (((q63_t) x * y ) >> 32)
-
-#if defined ( __CC_ARM )
-/* Enter low optimization region - place directly above function definition */
-#if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
-#define LOW_OPTIMIZATION_ENTER \
-       _Pragma ("push")         \
-       _Pragma ("O1")
-#else
-#define LOW_OPTIMIZATION_ENTER
-#endif
-
-/* Exit low optimization region - place directly after end of function definition */
-#if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
-#define LOW_OPTIMIZATION_EXIT \
-       _Pragma ("pop")
-#else
-#define LOW_OPTIMIZATION_EXIT
-#endif
-
-/* Enter low optimization region - place directly above function definition */
-#define IAR_ONLY_LOW_OPTIMIZATION_ENTER
-
-/* Exit low optimization region - place directly after end of function definition */
-#define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-#define LOW_OPTIMIZATION_ENTER
-#define LOW_OPTIMIZATION_EXIT
-#define IAR_ONLY_LOW_OPTIMIZATION_ENTER
-#define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#elif defined(__GNUC__)
-#define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") ))
-#define LOW_OPTIMIZATION_EXIT
-#define IAR_ONLY_LOW_OPTIMIZATION_ENTER
-#define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#elif defined(__ICCARM__)
-/* Enter low optimization region - place directly above function definition */
-#if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
-#define LOW_OPTIMIZATION_ENTER \
-       _Pragma ("optimize=low")
-#else
-#define LOW_OPTIMIZATION_ENTER
-#endif
-
-/* Exit low optimization region - place directly after end of function definition */
-#define LOW_OPTIMIZATION_EXIT
-
-/* Enter low optimization region - place directly above function definition */
-#if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
-#define IAR_ONLY_LOW_OPTIMIZATION_ENTER \
-       _Pragma ("optimize=low")
-#else
-#define IAR_ONLY_LOW_OPTIMIZATION_ENTER
-#endif
-
-/* Exit low optimization region - place directly after end of function definition */
-#define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#elif defined(__CSMC__)
-#define LOW_OPTIMIZATION_ENTER
-#define LOW_OPTIMIZATION_EXIT
-#define IAR_ONLY_LOW_OPTIMIZATION_ENTER
-#define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#elif defined(__TASKING__)
-#define LOW_OPTIMIZATION_ENTER
-#define LOW_OPTIMIZATION_EXIT
-#define IAR_ONLY_LOW_OPTIMIZATION_ENTER
-#define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#endif
-
-#ifdef   __cplusplus
-}
-#endif
-
-#if defined ( __GNUC__ )
-#pragma GCC diagnostic pop
-#endif
-
-#endif /* _ARM_MATH_H */
-
-/**
- *
- * End of file.
- */

Soft/STM32/Controle/Drivers/CMSIS/Include/cmsis_armcc.h

@@ -1,43 +1,104 @@
 /**************************************************************************//**
  * @file     cmsis_armcc.h
- * @brief    CMSIS Cortex-M Core Function/Instruction Header File
- * @version  V4.30
- * @date     20. October 2015
+ * @brief    CMSIS compiler ARMCC (Arm Compiler 5) header file
+ * @version  V5.0.4
+ * @date     10. January 2018
  ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
-   All rights reserved.
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-   - Neither the name of ARM nor the names of its contributors may be used
-     to endorse or promote products derived from this software without
-     specific prior written permission.
-   *
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-   ---------------------------------------------------------------------------*/
-
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
 
 #ifndef __CMSIS_ARMCC_H
 #define __CMSIS_ARMCC_H
 
 
 #if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
-  #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+  #error "Please use Arm Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* CMSIS compiler control architecture macros */
+#if ((defined (__TARGET_ARCH_6_M  ) && (__TARGET_ARCH_6_M   == 1)) || \
+     (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M  == 1))   )
+  #define __ARM_ARCH_6M__           1
+#endif
+
+#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M  == 1))
+  #define __ARM_ARCH_7M__           1
+#endif
+
+#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1))
+  #define __ARM_ARCH_7EM__          1
+#endif
+
+  /* __ARM_ARCH_8M_BASE__  not applicable */
+  /* __ARM_ARCH_8M_MAIN__  not applicable */
+
+
+/* CMSIS compiler specific defines */
+#ifndef   __ASM
+  #define __ASM                                  __asm
+#endif
+#ifndef   __INLINE
+  #define __INLINE                               __inline
+#endif
+#ifndef   __STATIC_INLINE
+  #define __STATIC_INLINE                        static __inline
+#endif
+#ifndef   __STATIC_FORCEINLINE                 
+  #define __STATIC_FORCEINLINE                   static __forceinline
+#endif           
+#ifndef   __NO_RETURN
+  #define __NO_RETURN                            __declspec(noreturn)
+#endif
+#ifndef   __USED
+  #define __USED                                 __attribute__((used))
+#endif
+#ifndef   __WEAK
+  #define __WEAK                                 __attribute__((weak))
+#endif
+#ifndef   __PACKED
+  #define __PACKED                               __attribute__((packed))
+#endif
+#ifndef   __PACKED_STRUCT
+  #define __PACKED_STRUCT                        __packed struct
+#endif
+#ifndef   __PACKED_UNION
+  #define __PACKED_UNION                         __packed union
+#endif
+#ifndef   __UNALIGNED_UINT32        /* deprecated */
+  #define __UNALIGNED_UINT32(x)                  (*((__packed uint32_t *)(x)))
+#endif
+#ifndef   __UNALIGNED_UINT16_WRITE
+  #define __UNALIGNED_UINT16_WRITE(addr, val)    ((*((__packed uint16_t *)(addr))) = (val))
+#endif
+#ifndef   __UNALIGNED_UINT16_READ
+  #define __UNALIGNED_UINT16_READ(addr)          (*((const __packed uint16_t *)(addr)))
+#endif
+#ifndef   __UNALIGNED_UINT32_WRITE
+  #define __UNALIGNED_UINT32_WRITE(addr, val)    ((*((__packed uint32_t *)(addr))) = (val))
+#endif
+#ifndef   __UNALIGNED_UINT32_READ
+  #define __UNALIGNED_UINT32_READ(addr)          (*((const __packed uint32_t *)(addr)))
+#endif
+#ifndef   __ALIGNED
+  #define __ALIGNED(x)                           __attribute__((aligned(x)))
+#endif
+#ifndef   __RESTRICT
+  #define __RESTRICT                             __restrict
 #endif
 
 /* ###########################  Core Function Access  ########################### */
@@ -46,7 +107,19 @@
   @{
  */
 
+/**
+  \brief   Enable IRQ Interrupts
+  \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
 /* intrinsic void __enable_irq();     */
+
+
+/**
+  \brief   Disable IRQ Interrupts
+  \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
 /* intrinsic void __disable_irq();    */
 
 /**
@@ -181,7 +254,8 @@ __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
 }
 
 
-#if       (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
 
 /**
   \brief   Enable FIQ
@@ -256,13 +330,12 @@ __STATIC_INLINE uint32_t __get_FAULTMASK(void)
 __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
 {
   register uint32_t __regFaultMask       __ASM("faultmask");
-  __regFaultMask = (faultMask & (uint32_t)1);
+  __regFaultMask = (faultMask & (uint32_t)1U);
 }
 
-#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
-
+#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
 
-#if       (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
 
 /**
   \brief   Get FPSCR
@@ -271,7 +344,8 @@ __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
  */
 __STATIC_INLINE uint32_t __get_FPSCR(void)
 {
-#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
   register uint32_t __regfpscr         __ASM("fpscr");
   return(__regfpscr);
 #else
@@ -287,15 +361,15 @@ __STATIC_INLINE uint32_t __get_FPSCR(void)
  */
 __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
 {
-#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
   register uint32_t __regfpscr         __ASM("fpscr");
   __regfpscr = (fpscr);
+#else
+  (void)fpscr;
 #endif
 }
 
-#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
-
-
 
 /*@} end of CMSIS_Core_RegAccFunctions */
 
@@ -369,9 +443,10 @@ __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
                    __schedule_barrier();\
                 } while (0U)
 
+                  
 /**
   \brief   Reverse byte order (32 bit)
-  \details Reverses the byte order in integer value.
+  \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412.
   \param [in]    value  Value to reverse
   \return               Reversed value
  */
@@ -380,7 +455,7 @@ __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
 
 /**
   \brief   Reverse byte order (16 bit)
-  \details Reverses the byte order in two unsigned short values.
+  \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856.
   \param [in]    value  Value to reverse
   \return               Reversed value
  */
@@ -392,14 +467,15 @@ __attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(u
 }
 #endif
 
+
 /**
-  \brief   Reverse byte order in signed short value
-  \details Reverses the byte order in a signed short value with sign extension to integer.
+  \brief   Reverse byte order (16 bit)
+  \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000.
   \param [in]    value  Value to reverse
   \return               Reversed value
  */
 #ifndef __NO_EMBEDDED_ASM
-__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value)
 {
   revsh r0, r0
   bx lr
@@ -410,8 +486,8 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in
 /**
   \brief   Rotate Right in unsigned value (32 bit)
   \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
-  \param [in]    value  Value to rotate
-  \param [in]    value  Number of Bits to rotate
+  \param [in]    op1  Value to rotate
+  \param [in]    op2  Number of Bits to rotate
   \return               Rotated value
  */
 #define __ROR                             __ror
@@ -433,23 +509,24 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in
   \param [in]    value  Value to reverse
   \return               Reversed value
  */
-#if       (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
   #define __RBIT                          __rbit
 #else
 __attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
 {
   uint32_t result;
-  int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+  uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */
 
   result = value;                      /* r will be reversed bits of v; first get LSB of v */
-  for (value >>= 1U; value; value >>= 1U)
+  for (value >>= 1U; value != 0U; value >>= 1U)
   {
     result <<= 1U;
     result |= value & 1U;
     s--;
   }
   result <<= s;                        /* shift when v's highest bits are zero */
-  return(result);
+  return result;
 }
 #endif
 
@@ -463,7 +540,8 @@ __attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
 #define __CLZ                             __clz
 
 
-#if       (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
 
 /**
   \brief   LDR Exclusive (8 bit)
@@ -645,7 +723,60 @@ __attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint3
  */
 #define __STRT(value, ptr)                __strt(value, ptr)
 
-#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+#else  /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
+
+/**
+  \brief   Signed Saturate
+  \details Saturates a signed value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (1..32)
+  \return             Saturated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
+{
+  if ((sat >= 1U) && (sat <= 32U))
+  {
+    const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
+    const int32_t min = -1 - max ;
+    if (val > max)
+    {
+      return max;
+    }
+    else if (val < min)
+    {
+      return min;
+    }
+  }
+  return val;
+}
+
+/**
+  \brief   Unsigned Saturate
+  \details Saturates an unsigned value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (0..31)
+  \return             Saturated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
+{
+  if (sat <= 31U)
+  {
+    const uint32_t max = ((1U << sat) - 1U);
+    if (val > (int32_t)max)
+    {
+      return max;
+    }
+    else if (val < 0)
+    {
+      return 0U;
+    }
+  }
+  return (uint32_t)val;
+}
+
+#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
 
 /*@}*/ /* end of group CMSIS_Core_InstructionInterface */
 
@@ -656,7 +787,7 @@ __attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint3
   @{
 */
 
-#if (__CORTEX_M >= 0x04U)  /* only for Cortex-M4 and above */
+#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
 
 #define __SADD8                           __sadd8
 #define __QADD8                           __qadd8
@@ -727,7 +858,7 @@ __attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint3
 #define __SMMLA(ARG1,ARG2,ARG3)          ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
                                                       ((int64_t)(ARG3) << 32U)     ) >> 32U))
 
-#endif /* (__CORTEX_M >= 0x04) */
+#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
 /*@} end of group CMSIS_SIMD_intrinsics */
 
 

Soft/STM32/Controle/Drivers/CMSIS/Include/cmsis_compiler.h

@@ -0,0 +1,266 @@
+/**************************************************************************//**
+ * @file     cmsis_compiler.h
+ * @brief    CMSIS compiler generic header file
+ * @version  V5.0.4
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __CMSIS_COMPILER_H
+#define __CMSIS_COMPILER_H
+
+#include <stdint.h>
+
+/*
+ * Arm Compiler 4/5
+ */
+#if   defined ( __CC_ARM )
+  #include "cmsis_armcc.h"
+
+
+/*
+ * Arm Compiler 6 (armclang)
+ */
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #include "cmsis_armclang.h"
+
+
+/*
+ * GNU Compiler
+ */
+#elif defined ( __GNUC__ )
+  #include "cmsis_gcc.h"
+
+
+/*
+ * IAR Compiler
+ */
+#elif defined ( __ICCARM__ )
+  #include <cmsis_iccarm.h>
+
+
+/*
+ * TI Arm Compiler
+ */
+#elif defined ( __TI_ARM__ )
+  #include <cmsis_ccs.h>
+
+  #ifndef   __ASM
+    #define __ASM                                  __asm
+  #endif
+  #ifndef   __INLINE
+    #define __INLINE                               inline
+  #endif
+  #ifndef   __STATIC_INLINE
+    #define __STATIC_INLINE                        static inline
+  #endif
+  #ifndef   __STATIC_FORCEINLINE
+    #define __STATIC_FORCEINLINE                   __STATIC_INLINE
+  #endif
+  #ifndef   __NO_RETURN
+    #define __NO_RETURN                            __attribute__((noreturn))
+  #endif
+  #ifndef   __USED
+    #define __USED                                 __attribute__((used))
+  #endif
+  #ifndef   __WEAK
+    #define __WEAK                                 __attribute__((weak))
+  #endif
+  #ifndef   __PACKED
+    #define __PACKED                               __attribute__((packed))
+  #endif
+  #ifndef   __PACKED_STRUCT
+    #define __PACKED_STRUCT                        struct __attribute__((packed))
+  #endif
+  #ifndef   __PACKED_UNION
+    #define __PACKED_UNION                         union __attribute__((packed))
+  #endif
+  #ifndef   __UNALIGNED_UINT32        /* deprecated */
+    struct __attribute__((packed)) T_UINT32 { uint32_t v; };
+    #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT16_WRITE
+    __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+    #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT16_READ
+    __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+    #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT32_WRITE
+    __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+    #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT32_READ
+    __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+    #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __ALIGNED
+    #define __ALIGNED(x)                           __attribute__((aligned(x)))
+  #endif
+  #ifndef   __RESTRICT
+    #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
+    #define __RESTRICT
+  #endif
+
+
+/*
+ * TASKING Compiler
+ */
+#elif defined ( __TASKING__ )
+  /*
+   * The CMSIS functions have been implemented as intrinsics in the compiler.
+   * Please use "carm -?i" to get an up to date list of all intrinsics,
+   * Including the CMSIS ones.
+   */
+
+  #ifndef   __ASM
+    #define __ASM                                  __asm
+  #endif
+  #ifndef   __INLINE
+    #define __INLINE                               inline
+  #endif
+  #ifndef   __STATIC_INLINE
+    #define __STATIC_INLINE                        static inline
+  #endif
+  #ifndef   __STATIC_FORCEINLINE
+    #define __STATIC_FORCEINLINE                   __STATIC_INLINE
+  #endif
+  #ifndef   __NO_RETURN
+    #define __NO_RETURN                            __attribute__((noreturn))
+  #endif
+  #ifndef   __USED
+    #define __USED                                 __attribute__((used))
+  #endif
+  #ifndef   __WEAK
+    #define __WEAK                                 __attribute__((weak))
+  #endif
+  #ifndef   __PACKED
+    #define __PACKED                               __packed__
+  #endif
+  #ifndef   __PACKED_STRUCT
+    #define __PACKED_STRUCT                        struct __packed__
+  #endif
+  #ifndef   __PACKED_UNION
+    #define __PACKED_UNION                         union __packed__
+  #endif
+  #ifndef   __UNALIGNED_UINT32        /* deprecated */
+    struct __packed__ T_UINT32 { uint32_t v; };
+    #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT16_WRITE
+    __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+    #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT16_READ
+    __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+    #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT32_WRITE
+    __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+    #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT32_READ
+    __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+    #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __ALIGNED
+    #define __ALIGNED(x)              __align(x)
+  #endif
+  #ifndef   __RESTRICT
+    #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
+    #define __RESTRICT
+  #endif
+
+
+/*
+ * COSMIC Compiler
+ */
+#elif defined ( __CSMC__ )
+   #include <cmsis_csm.h>
+
+ #ifndef   __ASM
+    #define __ASM                                  _asm
+  #endif
+  #ifndef   __INLINE
+    #define __INLINE                               inline
+  #endif
+  #ifndef   __STATIC_INLINE
+    #define __STATIC_INLINE                        static inline
+  #endif
+  #ifndef   __STATIC_FORCEINLINE
+    #define __STATIC_FORCEINLINE                   __STATIC_INLINE
+  #endif
+  #ifndef   __NO_RETURN
+    // NO RETURN is automatically detected hence no warning here
+    #define __NO_RETURN
+  #endif
+  #ifndef   __USED
+    #warning No compiler specific solution for __USED. __USED is ignored.
+    #define __USED
+  #endif
+  #ifndef   __WEAK
+    #define __WEAK                                 __weak
+  #endif
+  #ifndef   __PACKED
+    #define __PACKED                               @packed
+  #endif
+  #ifndef   __PACKED_STRUCT
+    #define __PACKED_STRUCT                        @packed struct
+  #endif
+  #ifndef   __PACKED_UNION
+    #define __PACKED_UNION                         @packed union
+  #endif
+  #ifndef   __UNALIGNED_UINT32        /* deprecated */
+    @packed struct T_UINT32 { uint32_t v; };
+    #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT16_WRITE
+    __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+    #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT16_READ
+    __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+    #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT32_WRITE
+    __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+    #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT32_READ
+    __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+    #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __ALIGNED
+    #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored.
+    #define __ALIGNED(x)
+  #endif
+  #ifndef   __RESTRICT
+    #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
+    #define __RESTRICT
+  #endif
+
+
+#else
+  #error Unknown compiler.
+#endif
+
+
+#endif /* __CMSIS_COMPILER_H */
+

Soft/STM32/Controle/Drivers/CMSIS/Include/cmsis_iccarm.h

@@ -0,0 +1,935 @@
+/**************************************************************************//**
+ * @file     cmsis_iccarm.h
+ * @brief    CMSIS compiler ICCARM (IAR Compiler for Arm) header file
+ * @version  V5.0.7
+ * @date     19. June 2018
+ ******************************************************************************/
+
+//------------------------------------------------------------------------------
+//
+// Copyright (c) 2017-2018 IAR Systems
+//
+// Licensed under the Apache License, Version 2.0 (the "License")
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+//------------------------------------------------------------------------------
+
+
+#ifndef __CMSIS_ICCARM_H__
+#define __CMSIS_ICCARM_H__
+
+#ifndef __ICCARM__
+  #error This file should only be compiled by ICCARM
+#endif
+
+#pragma system_include
+
+#define __IAR_FT _Pragma("inline=forced") __intrinsic
+
+#if (__VER__ >= 8000000)
+  #define __ICCARM_V8 1
+#else
+  #define __ICCARM_V8 0
+#endif
+
+#ifndef __ALIGNED
+  #if __ICCARM_V8
+    #define __ALIGNED(x) __attribute__((aligned(x)))
+  #elif (__VER__ >= 7080000)
+    /* Needs IAR language extensions */
+    #define __ALIGNED(x) __attribute__((aligned(x)))
+  #else
+    #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored.
+    #define __ALIGNED(x)
+  #endif
+#endif
+
+
+/* Define compiler macros for CPU architecture, used in CMSIS 5.
+ */
+#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__
+/* Macros already defined */
+#else
+  #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__)
+    #define __ARM_ARCH_8M_MAIN__ 1
+  #elif defined(__ARM8M_BASELINE__)
+    #define __ARM_ARCH_8M_BASE__ 1
+  #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M'
+    #if __ARM_ARCH == 6
+      #define __ARM_ARCH_6M__ 1
+    #elif __ARM_ARCH == 7
+      #if __ARM_FEATURE_DSP
+        #define __ARM_ARCH_7EM__ 1
+      #else
+        #define __ARM_ARCH_7M__ 1
+      #endif
+    #endif /* __ARM_ARCH */
+  #endif /* __ARM_ARCH_PROFILE == 'M' */
+#endif
+
+/* Alternativ core deduction for older ICCARM's */
+#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \
+    !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__)
+  #if defined(__ARM6M__) && (__CORE__ == __ARM6M__)
+    #define __ARM_ARCH_6M__ 1
+  #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__)
+    #define __ARM_ARCH_7M__ 1
+  #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__)
+    #define __ARM_ARCH_7EM__  1
+  #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__)
+    #define __ARM_ARCH_8M_BASE__ 1
+  #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__)
+    #define __ARM_ARCH_8M_MAIN__ 1
+  #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__)
+    #define __ARM_ARCH_8M_MAIN__ 1
+  #else
+    #error "Unknown target."
+  #endif
+#endif
+
+
+
+#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1
+  #define __IAR_M0_FAMILY  1
+#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1
+  #define __IAR_M0_FAMILY  1
+#else
+  #define __IAR_M0_FAMILY  0
+#endif
+
+
+#ifndef __ASM
+  #define __ASM __asm
+#endif
+
+#ifndef __INLINE
+  #define __INLINE inline
+#endif
+
+#ifndef   __NO_RETURN
+  #if __ICCARM_V8
+    #define __NO_RETURN __attribute__((__noreturn__))
+  #else
+    #define __NO_RETURN _Pragma("object_attribute=__noreturn")
+  #endif
+#endif
+
+#ifndef   __PACKED
+  #if __ICCARM_V8
+    #define __PACKED __attribute__((packed, aligned(1)))
+  #else
+    /* Needs IAR language extensions */
+    #define __PACKED __packed
+  #endif
+#endif
+
+#ifndef   __PACKED_STRUCT
+  #if __ICCARM_V8
+    #define __PACKED_STRUCT struct __attribute__((packed, aligned(1)))
+  #else
+    /* Needs IAR language extensions */
+    #define __PACKED_STRUCT __packed struct
+  #endif
+#endif
+
+#ifndef   __PACKED_UNION
+  #if __ICCARM_V8
+    #define __PACKED_UNION union __attribute__((packed, aligned(1)))
+  #else
+    /* Needs IAR language extensions */
+    #define __PACKED_UNION __packed union
+  #endif
+#endif
+
+#ifndef   __RESTRICT
+  #define __RESTRICT            __restrict
+#endif
+
+#ifndef   __STATIC_INLINE
+  #define __STATIC_INLINE       static inline
+#endif
+
+#ifndef   __FORCEINLINE
+  #define __FORCEINLINE         _Pragma("inline=forced")
+#endif
+
+#ifndef   __STATIC_FORCEINLINE
+  #define __STATIC_FORCEINLINE  __FORCEINLINE __STATIC_INLINE
+#endif
+
+#ifndef __UNALIGNED_UINT16_READ
+#pragma language=save
+#pragma language=extended
+__IAR_FT uint16_t __iar_uint16_read(void const *ptr)
+{
+  return *(__packed uint16_t*)(ptr);
+}
+#pragma language=restore
+#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR)
+#endif
+
+
+#ifndef __UNALIGNED_UINT16_WRITE
+#pragma language=save
+#pragma language=extended
+__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val)
+{
+  *(__packed uint16_t*)(ptr) = val;;
+}
+#pragma language=restore
+#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL)
+#endif
+
+#ifndef __UNALIGNED_UINT32_READ
+#pragma language=save
+#pragma language=extended
+__IAR_FT uint32_t __iar_uint32_read(void const *ptr)
+{
+  return *(__packed uint32_t*)(ptr);
+}
+#pragma language=restore
+#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR)
+#endif
+
+#ifndef __UNALIGNED_UINT32_WRITE
+#pragma language=save
+#pragma language=extended
+__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val)
+{
+  *(__packed uint32_t*)(ptr) = val;;
+}
+#pragma language=restore
+#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL)
+#endif
+
+#ifndef __UNALIGNED_UINT32   /* deprecated */
+#pragma language=save
+#pragma language=extended
+__packed struct  __iar_u32 { uint32_t v; };
+#pragma language=restore
+#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v)
+#endif
+
+#ifndef   __USED
+  #if __ICCARM_V8
+    #define __USED __attribute__((used))
+  #else
+    #define __USED _Pragma("__root")
+  #endif
+#endif
+
+#ifndef   __WEAK
+  #if __ICCARM_V8
+    #define __WEAK __attribute__((weak))
+  #else
+    #define __WEAK _Pragma("__weak")
+  #endif
+#endif
+
+
+#ifndef __ICCARM_INTRINSICS_VERSION__
+  #define __ICCARM_INTRINSICS_VERSION__  0
+#endif
+
+#if __ICCARM_INTRINSICS_VERSION__ == 2
+
+  #if defined(__CLZ)
+    #undef __CLZ
+  #endif
+  #if defined(__REVSH)
+    #undef __REVSH
+  #endif
+  #if defined(__RBIT)
+    #undef __RBIT
+  #endif
+  #if defined(__SSAT)
+    #undef __SSAT
+  #endif
+  #if defined(__USAT)
+    #undef __USAT
+  #endif
+
+  #include "iccarm_builtin.h"
+
+  #define __disable_fault_irq __iar_builtin_disable_fiq
+  #define __disable_irq       __iar_builtin_disable_interrupt
+  #define __enable_fault_irq  __iar_builtin_enable_fiq
+  #define __enable_irq        __iar_builtin_enable_interrupt
+  #define __arm_rsr           __iar_builtin_rsr
+  #define __arm_wsr           __iar_builtin_wsr
+
+
+  #define __get_APSR()                (__arm_rsr("APSR"))
+  #define __get_BASEPRI()             (__arm_rsr("BASEPRI"))
+  #define __get_CONTROL()             (__arm_rsr("CONTROL"))
+  #define __get_FAULTMASK()           (__arm_rsr("FAULTMASK"))
+
+  #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+       (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+    #define __get_FPSCR()             (__arm_rsr("FPSCR"))
+    #define __set_FPSCR(VALUE)        (__arm_wsr("FPSCR", (VALUE)))
+  #else
+    #define __get_FPSCR()             ( 0 )
+    #define __set_FPSCR(VALUE)        ((void)VALUE)
+  #endif
+
+  #define __get_IPSR()                (__arm_rsr("IPSR"))
+  #define __get_MSP()                 (__arm_rsr("MSP"))
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure MSPLIM is RAZ/WI
+    #define __get_MSPLIM()            (0U)
+  #else
+    #define __get_MSPLIM()            (__arm_rsr("MSPLIM"))
+  #endif
+  #define __get_PRIMASK()             (__arm_rsr("PRIMASK"))
+  #define __get_PSP()                 (__arm_rsr("PSP"))
+
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+    #define __get_PSPLIM()            (0U)
+  #else
+    #define __get_PSPLIM()            (__arm_rsr("PSPLIM"))
+  #endif
+
+  #define __get_xPSR()                (__arm_rsr("xPSR"))
+
+  #define __set_BASEPRI(VALUE)        (__arm_wsr("BASEPRI", (VALUE)))
+  #define __set_BASEPRI_MAX(VALUE)    (__arm_wsr("BASEPRI_MAX", (VALUE)))
+  #define __set_CONTROL(VALUE)        (__arm_wsr("CONTROL", (VALUE)))
+  #define __set_FAULTMASK(VALUE)      (__arm_wsr("FAULTMASK", (VALUE)))
+  #define __set_MSP(VALUE)            (__arm_wsr("MSP", (VALUE)))
+
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure MSPLIM is RAZ/WI
+    #define __set_MSPLIM(VALUE)       ((void)(VALUE))
+  #else
+    #define __set_MSPLIM(VALUE)       (__arm_wsr("MSPLIM", (VALUE)))
+  #endif
+  #define __set_PRIMASK(VALUE)        (__arm_wsr("PRIMASK", (VALUE)))
+  #define __set_PSP(VALUE)            (__arm_wsr("PSP", (VALUE)))
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+    #define __set_PSPLIM(VALUE)       ((void)(VALUE))
+  #else
+    #define __set_PSPLIM(VALUE)       (__arm_wsr("PSPLIM", (VALUE)))
+  #endif
+
+  #define __TZ_get_CONTROL_NS()       (__arm_rsr("CONTROL_NS"))
+  #define __TZ_set_CONTROL_NS(VALUE)  (__arm_wsr("CONTROL_NS", (VALUE)))
+  #define __TZ_get_PSP_NS()           (__arm_rsr("PSP_NS"))
+  #define __TZ_set_PSP_NS(VALUE)      (__arm_wsr("PSP_NS", (VALUE)))
+  #define __TZ_get_MSP_NS()           (__arm_rsr("MSP_NS"))
+  #define __TZ_set_MSP_NS(VALUE)      (__arm_wsr("MSP_NS", (VALUE)))
+  #define __TZ_get_SP_NS()            (__arm_rsr("SP_NS"))
+  #define __TZ_set_SP_NS(VALUE)       (__arm_wsr("SP_NS", (VALUE)))
+  #define __TZ_get_PRIMASK_NS()       (__arm_rsr("PRIMASK_NS"))
+  #define __TZ_set_PRIMASK_NS(VALUE)  (__arm_wsr("PRIMASK_NS", (VALUE)))
+  #define __TZ_get_BASEPRI_NS()       (__arm_rsr("BASEPRI_NS"))
+  #define __TZ_set_BASEPRI_NS(VALUE)  (__arm_wsr("BASEPRI_NS", (VALUE)))
+  #define __TZ_get_FAULTMASK_NS()     (__arm_rsr("FAULTMASK_NS"))
+  #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE)))
+
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+    #define __TZ_get_PSPLIM_NS()      (0U)
+    #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE))
+  #else
+    #define __TZ_get_PSPLIM_NS()      (__arm_rsr("PSPLIM_NS"))
+    #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE)))
+  #endif
+
+  #define __TZ_get_MSPLIM_NS()        (__arm_rsr("MSPLIM_NS"))
+  #define __TZ_set_MSPLIM_NS(VALUE)   (__arm_wsr("MSPLIM_NS", (VALUE)))
+
+  #define __NOP     __iar_builtin_no_operation
+
+  #define __CLZ     __iar_builtin_CLZ
+  #define __CLREX   __iar_builtin_CLREX
+
+  #define __DMB     __iar_builtin_DMB
+  #define __DSB     __iar_builtin_DSB
+  #define __ISB     __iar_builtin_ISB
+
+  #define __LDREXB  __iar_builtin_LDREXB
+  #define __LDREXH  __iar_builtin_LDREXH
+  #define __LDREXW  __iar_builtin_LDREX
+
+  #define __RBIT    __iar_builtin_RBIT
+  #define __REV     __iar_builtin_REV
+  #define __REV16   __iar_builtin_REV16
+
+  __IAR_FT int16_t __REVSH(int16_t val)
+  {
+    return (int16_t) __iar_builtin_REVSH(val);
+  }
+
+  #define __ROR     __iar_builtin_ROR
+  #define __RRX     __iar_builtin_RRX
+
+  #define __SEV     __iar_builtin_SEV
+
+  #if !__IAR_M0_FAMILY
+    #define __SSAT    __iar_builtin_SSAT
+  #endif
+
+  #define __STREXB  __iar_builtin_STREXB
+  #define __STREXH  __iar_builtin_STREXH
+  #define __STREXW  __iar_builtin_STREX
+
+  #if !__IAR_M0_FAMILY
+    #define __USAT    __iar_builtin_USAT
+  #endif
+
+  #define __WFE     __iar_builtin_WFE
+  #define __WFI     __iar_builtin_WFI
+
+  #if __ARM_MEDIA__
+    #define __SADD8   __iar_builtin_SADD8
+    #define __QADD8   __iar_builtin_QADD8
+    #define __SHADD8  __iar_builtin_SHADD8
+    #define __UADD8   __iar_builtin_UADD8
+    #define __UQADD8  __iar_builtin_UQADD8
+    #define __UHADD8  __iar_builtin_UHADD8
+    #define __SSUB8   __iar_builtin_SSUB8
+    #define __QSUB8   __iar_builtin_QSUB8
+    #define __SHSUB8  __iar_builtin_SHSUB8
+    #define __USUB8   __iar_builtin_USUB8
+    #define __UQSUB8  __iar_builtin_UQSUB8
+    #define __UHSUB8  __iar_builtin_UHSUB8
+    #define __SADD16  __iar_builtin_SADD16
+    #define __QADD16  __iar_builtin_QADD16
+    #define __SHADD16 __iar_builtin_SHADD16
+    #define __UADD16  __iar_builtin_UADD16
+    #define __UQADD16 __iar_builtin_UQADD16
+    #define __UHADD16 __iar_builtin_UHADD16
+    #define __SSUB16  __iar_builtin_SSUB16
+    #define __QSUB16  __iar_builtin_QSUB16
+    #define __SHSUB16 __iar_builtin_SHSUB16
+    #define __USUB16  __iar_builtin_USUB16
+    #define __UQSUB16 __iar_builtin_UQSUB16
+    #define __UHSUB16 __iar_builtin_UHSUB16
+    #define __SASX    __iar_builtin_SASX
+    #define __QASX    __iar_builtin_QASX
+    #define __SHASX   __iar_builtin_SHASX
+    #define __UASX    __iar_builtin_UASX
+    #define __UQASX   __iar_builtin_UQASX
+    #define __UHASX   __iar_builtin_UHASX
+    #define __SSAX    __iar_builtin_SSAX
+    #define __QSAX    __iar_builtin_QSAX
+    #define __SHSAX   __iar_builtin_SHSAX
+    #define __USAX    __iar_builtin_USAX
+    #define __UQSAX   __iar_builtin_UQSAX
+    #define __UHSAX   __iar_builtin_UHSAX
+    #define __USAD8   __iar_builtin_USAD8
+    #define __USADA8  __iar_builtin_USADA8
+    #define __SSAT16  __iar_builtin_SSAT16
+    #define __USAT16  __iar_builtin_USAT16
+    #define __UXTB16  __iar_builtin_UXTB16
+    #define __UXTAB16 __iar_builtin_UXTAB16
+    #define __SXTB16  __iar_builtin_SXTB16
+    #define __SXTAB16 __iar_builtin_SXTAB16
+    #define __SMUAD   __iar_builtin_SMUAD
+    #define __SMUADX  __iar_builtin_SMUADX
+    #define __SMMLA   __iar_builtin_SMMLA
+    #define __SMLAD   __iar_builtin_SMLAD
+    #define __SMLADX  __iar_builtin_SMLADX
+    #define __SMLALD  __iar_builtin_SMLALD
+    #define __SMLALDX __iar_builtin_SMLALDX
+    #define __SMUSD   __iar_builtin_SMUSD
+    #define __SMUSDX  __iar_builtin_SMUSDX
+    #define __SMLSD   __iar_builtin_SMLSD
+    #define __SMLSDX  __iar_builtin_SMLSDX
+    #define __SMLSLD  __iar_builtin_SMLSLD
+    #define __SMLSLDX __iar_builtin_SMLSLDX
+    #define __SEL     __iar_builtin_SEL
+    #define __QADD    __iar_builtin_QADD
+    #define __QSUB    __iar_builtin_QSUB
+    #define __PKHBT   __iar_builtin_PKHBT
+    #define __PKHTB   __iar_builtin_PKHTB
+  #endif
+
+#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */
+
+  #if __IAR_M0_FAMILY
+   /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
+    #define __CLZ  __cmsis_iar_clz_not_active
+    #define __SSAT __cmsis_iar_ssat_not_active
+    #define __USAT __cmsis_iar_usat_not_active
+    #define __RBIT __cmsis_iar_rbit_not_active
+    #define __get_APSR  __cmsis_iar_get_APSR_not_active
+  #endif
+
+
+  #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+         (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     ))
+    #define __get_FPSCR __cmsis_iar_get_FPSR_not_active
+    #define __set_FPSCR __cmsis_iar_set_FPSR_not_active
+  #endif
+
+  #ifdef __INTRINSICS_INCLUDED
+  #error intrinsics.h is already included previously!
+  #endif
+
+  #include <intrinsics.h>
+
+  #if __IAR_M0_FAMILY
+   /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
+    #undef __CLZ
+    #undef __SSAT
+    #undef __USAT
+    #undef __RBIT
+    #undef __get_APSR
+
+    __STATIC_INLINE uint8_t __CLZ(uint32_t data)
+    {
+      if (data == 0U) { return 32U; }
+
+      uint32_t count = 0U;
+      uint32_t mask = 0x80000000U;
+
+      while ((data & mask) == 0U)
+      {
+        count += 1U;
+        mask = mask >> 1U;
+      }
+      return count;
+    }
+
+    __STATIC_INLINE uint32_t __RBIT(uint32_t v)
+    {
+      uint8_t sc = 31U;
+      uint32_t r = v;
+      for (v >>= 1U; v; v >>= 1U)
+      {
+        r <<= 1U;
+        r |= v & 1U;
+        sc--;
+      }
+      return (r << sc);
+    }
+
+    __STATIC_INLINE  uint32_t __get_APSR(void)
+    {
+      uint32_t res;
+      __asm("MRS      %0,APSR" : "=r" (res));
+      return res;
+    }
+
+  #endif
+
+  #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+         (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     ))
+    #undef __get_FPSCR
+    #undef __set_FPSCR
+    #define __get_FPSCR()       (0)
+    #define __set_FPSCR(VALUE)  ((void)VALUE)
+  #endif
+
+  #pragma diag_suppress=Pe940
+  #pragma diag_suppress=Pe177
+
+  #define __enable_irq    __enable_interrupt
+  #define __disable_irq   __disable_interrupt
+  #define __NOP           __no_operation
+
+  #define __get_xPSR      __get_PSR
+
+  #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0)
+
+    __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr)
+    {
+      return __LDREX((unsigned long *)ptr);
+    }
+
+    __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr)
+    {
+      return __STREX(value, (unsigned long *)ptr);
+    }
+  #endif
+
+
+  /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
+  #if (__CORTEX_M >= 0x03)
+
+    __IAR_FT uint32_t __RRX(uint32_t value)
+    {
+      uint32_t result;
+      __ASM("RRX      %0, %1" : "=r"(result) : "r" (value) : "cc");
+      return(result);
+    }
+
+    __IAR_FT void __set_BASEPRI_MAX(uint32_t value)
+    {
+      __asm volatile("MSR      BASEPRI_MAX,%0"::"r" (value));
+    }
+
+
+    #define __enable_fault_irq  __enable_fiq
+    #define __disable_fault_irq __disable_fiq
+
+
+  #endif /* (__CORTEX_M >= 0x03) */
+
+  __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2)
+  {
+    return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2));
+  }
+
+  #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+       (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+
+   __IAR_FT uint32_t __get_MSPLIM(void)
+    {
+      uint32_t res;
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure MSPLIM is RAZ/WI
+      res = 0U;
+    #else
+      __asm volatile("MRS      %0,MSPLIM" : "=r" (res));
+    #endif
+      return res;
+    }
+
+    __IAR_FT void   __set_MSPLIM(uint32_t value)
+    {
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure MSPLIM is RAZ/WI
+      (void)value;
+    #else
+      __asm volatile("MSR      MSPLIM,%0" :: "r" (value));
+    #endif
+    }
+
+    __IAR_FT uint32_t __get_PSPLIM(void)
+    {
+      uint32_t res;
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      res = 0U;
+    #else
+      __asm volatile("MRS      %0,PSPLIM" : "=r" (res));
+    #endif
+      return res;
+    }
+
+    __IAR_FT void   __set_PSPLIM(uint32_t value)
+    {
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      (void)value;
+    #else
+      __asm volatile("MSR      PSPLIM,%0" :: "r" (value));
+    #endif
+    }
+
+    __IAR_FT uint32_t __TZ_get_CONTROL_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,CONTROL_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_CONTROL_NS(uint32_t value)
+    {
+      __asm volatile("MSR      CONTROL_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_PSP_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,PSP_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_PSP_NS(uint32_t value)
+    {
+      __asm volatile("MSR      PSP_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_MSP_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,MSP_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_MSP_NS(uint32_t value)
+    {
+      __asm volatile("MSR      MSP_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_SP_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,SP_NS" : "=r" (res));
+      return res;
+    }
+    __IAR_FT void   __TZ_set_SP_NS(uint32_t value)
+    {
+      __asm volatile("MSR      SP_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_PRIMASK_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,PRIMASK_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_PRIMASK_NS(uint32_t value)
+    {
+      __asm volatile("MSR      PRIMASK_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_BASEPRI_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,BASEPRI_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_BASEPRI_NS(uint32_t value)
+    {
+      __asm volatile("MSR      BASEPRI_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_FAULTMASK_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,FAULTMASK_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_FAULTMASK_NS(uint32_t value)
+    {
+      __asm volatile("MSR      FAULTMASK_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_PSPLIM_NS(void)
+    {
+      uint32_t res;
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      res = 0U;
+    #else
+      __asm volatile("MRS      %0,PSPLIM_NS" : "=r" (res));
+    #endif
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_PSPLIM_NS(uint32_t value)
+    {
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      (void)value;
+    #else
+      __asm volatile("MSR      PSPLIM_NS,%0" :: "r" (value));
+    #endif
+    }
+
+    __IAR_FT uint32_t   __TZ_get_MSPLIM_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,MSPLIM_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_MSPLIM_NS(uint32_t value)
+    {
+      __asm volatile("MSR      MSPLIM_NS,%0" :: "r" (value));
+    }
+
+  #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
+
+#endif   /* __ICCARM_INTRINSICS_VERSION__ == 2 */
+
+#define __BKPT(value)    __asm volatile ("BKPT     %0" : : "i"(value))
+
+#if __IAR_M0_FAMILY
+  __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
+  {
+    if ((sat >= 1U) && (sat <= 32U))
+    {
+      const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
+      const int32_t min = -1 - max ;
+      if (val > max)
+      {
+        return max;
+      }
+      else if (val < min)
+      {
+        return min;
+      }
+    }
+    return val;
+  }
+
+  __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
+  {
+    if (sat <= 31U)
+    {
+      const uint32_t max = ((1U << sat) - 1U);
+      if (val > (int32_t)max)
+      {
+        return max;
+      }
+      else if (val < 0)
+      {
+        return 0U;
+      }
+    }
+    return (uint32_t)val;
+  }
+#endif
+
+#if (__CORTEX_M >= 0x03)   /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
+
+  __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr)
+  {
+    uint32_t res;
+    __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
+    return ((uint8_t)res);
+  }
+
+  __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr)
+  {
+    uint32_t res;
+    __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
+    return ((uint16_t)res);
+  }
+
+  __IAR_FT uint32_t __LDRT(volatile uint32_t *addr)
+  {
+    uint32_t res;
+    __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
+    return res;
+  }
+
+  __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr)
+  {
+    __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
+  }
+
+  __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr)
+  {
+    __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
+  }
+
+  __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr)
+  {
+    __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory");
+  }
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+     (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+
+
+  __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint8_t)res);
+  }
+
+  __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint16_t)res);
+  }
+
+  __IAR_FT uint32_t __LDA(volatile uint32_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return res;
+  }
+
+  __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr)
+  {
+    __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
+  }
+
+  __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr)
+  {
+    __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
+  }
+
+  __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr)
+  {
+    __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
+  }
+
+  __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint8_t)res);
+  }
+
+  __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint16_t)res);
+  }
+
+  __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return res;
+  }
+
+  __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
+    return res;
+  }
+
+  __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
+    return res;
+  }
+
+  __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
+    return res;
+  }
+
+#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
+
+#undef __IAR_FT
+#undef __IAR_M0_FAMILY
+#undef __ICCARM_V8
+
+#pragma diag_default=Pe940
+#pragma diag_default=Pe177
+
+#endif /* __CMSIS_ICCARM_H__ */

Soft/STM32/Controle/Drivers/CMSIS/Include/cmsis_version.h

@@ -0,0 +1,39 @@
+/**************************************************************************//**
+ * @file     cmsis_version.h
+ * @brief    CMSIS Core(M) Version definitions
+ * @version  V5.0.2
+ * @date     19. April 2017
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2017 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CMSIS_VERSION_H
+#define __CMSIS_VERSION_H
+
+/*  CMSIS Version definitions */
+#define __CM_CMSIS_VERSION_MAIN  ( 5U)                                      /*!< [31:16] CMSIS Core(M) main version */
+#define __CM_CMSIS_VERSION_SUB   ( 1U)                                      /*!< [15:0]  CMSIS Core(M) sub version */
+#define __CM_CMSIS_VERSION       ((__CM_CMSIS_VERSION_MAIN << 16U) | \
+                                   __CM_CMSIS_VERSION_SUB           )       /*!< CMSIS Core(M) version number */
+#endif

Soft/STM32/Controle/Drivers/CMSIS/Include/core_armv8mbl.h

@@ -0,0 +1,1918 @@
+/**************************************************************************//**
+ * @file     core_armv8mbl.h
+ * @brief    CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File
+ * @version  V5.0.7
+ * @date     22. June 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_ARMV8MBL_H_GENERIC
+#define __CORE_ARMV8MBL_H_GENERIC
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_ARMv8MBL
+  @{
+ */
+
+#include "cmsis_version.h"
+
+/*  CMSIS definitions */
+#define __ARMv8MBL_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                   /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __ARMv8MBL_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)                    /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __ARMv8MBL_CMSIS_VERSION       ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \
+                                         __ARMv8MBL_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                     ( 2U)                                            /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_ARMV8MBL_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_ARMV8MBL_H_DEPENDANT
+#define __CORE_ARMV8MBL_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __ARMv8MBL_REV
+    #define __ARMv8MBL_REV               0x0000U
+    #warning "__ARMv8MBL_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             0U
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __SAUREGION_PRESENT
+    #define __SAUREGION_PRESENT       0U
+    #warning "__SAUREGION_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __VTOR_PRESENT
+    #define __VTOR_PRESENT            0U
+    #warning "__VTOR_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+
+  #ifndef __ETM_PRESENT
+    #define __ETM_PRESENT             0U
+    #warning "__ETM_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MTB_PRESENT
+    #define __MTB_PRESENT             0U
+    #warning "__MTB_PRESENT not defined in device header file; using default!"
+  #endif
+
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group ARMv8MBL */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core SAU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack-pointer select */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[16U];              /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[16U];
+  __IOM uint32_t ICER[16U];              /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[16U];
+  __IOM uint32_t ISPR[16U];              /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[16U];
+  __IOM uint32_t ICPR[16U];              /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[16U];
+  __IOM uint32_t IABR[16U];              /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[16U];
+  __IOM uint32_t ITNS[16U];              /*!< Offset: 0x280 (R/W)  Interrupt Non-Secure State Register */
+        uint32_t RESERVED5[16U];
+  __IOM uint32_t IPR[124U];              /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+#else
+        uint32_t RESERVED0;
+#endif
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHPR[2U];               /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_PENDNMISET_Pos            31U                                            /*!< SCB ICSR: PENDNMISET Position */
+#define SCB_ICSR_PENDNMISET_Msk            (1UL << SCB_ICSR_PENDNMISET_Pos)               /*!< SCB ICSR: PENDNMISET Mask */
+
+#define SCB_ICSR_NMIPENDSET_Pos            SCB_ICSR_PENDNMISET_Pos                        /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */
+#define SCB_ICSR_NMIPENDSET_Msk            SCB_ICSR_PENDNMISET_Msk                        /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */
+
+#define SCB_ICSR_PENDNMICLR_Pos            30U                                            /*!< SCB ICSR: PENDNMICLR Position */
+#define SCB_ICSR_PENDNMICLR_Msk            (1UL << SCB_ICSR_PENDNMICLR_Pos)               /*!< SCB ICSR: PENDNMICLR Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_STTNS_Pos                 24U                                            /*!< SCB ICSR: STTNS Position (Security Extension) */
+#define SCB_ICSR_STTNS_Msk                 (1UL << SCB_ICSR_STTNS_Pos)                    /*!< SCB ICSR: STTNS Mask (Security Extension) */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIS_Pos                 14U                                            /*!< SCB AIRCR: PRIS Position */
+#define SCB_AIRCR_PRIS_Msk                 (1UL << SCB_AIRCR_PRIS_Pos)                    /*!< SCB AIRCR: PRIS Mask */
+
+#define SCB_AIRCR_BFHFNMINS_Pos            13U                                            /*!< SCB AIRCR: BFHFNMINS Position */
+#define SCB_AIRCR_BFHFNMINS_Msk            (1UL << SCB_AIRCR_BFHFNMINS_Pos)               /*!< SCB AIRCR: BFHFNMINS Mask */
+
+#define SCB_AIRCR_SYSRESETREQS_Pos          3U                                            /*!< SCB AIRCR: SYSRESETREQS Position */
+#define SCB_AIRCR_SYSRESETREQS_Msk         (1UL << SCB_AIRCR_SYSRESETREQS_Pos)            /*!< SCB AIRCR: SYSRESETREQS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEPS_Pos              3U                                            /*!< SCB SCR: SLEEPDEEPS Position */
+#define SCB_SCR_SLEEPDEEPS_Msk             (1UL << SCB_SCR_SLEEPDEEPS_Pos)                /*!< SCB SCR: SLEEPDEEPS Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos                     18U                                            /*!< SCB CCR: BP Position */
+#define SCB_CCR_BP_Msk                     (1UL << SCB_CCR_BP_Pos)                        /*!< SCB CCR: BP Mask */
+
+#define SCB_CCR_IC_Pos                     17U                                            /*!< SCB CCR: IC Position */
+#define SCB_CCR_IC_Msk                     (1UL << SCB_CCR_IC_Pos)                        /*!< SCB CCR: IC Mask */
+
+#define SCB_CCR_DC_Pos                     16U                                            /*!< SCB CCR: DC Position */
+#define SCB_CCR_DC_Msk                     (1UL << SCB_CCR_DC_Pos)                        /*!< SCB CCR: DC Mask */
+
+#define SCB_CCR_STKOFHFNMIGN_Pos           10U                                            /*!< SCB CCR: STKOFHFNMIGN Position */
+#define SCB_CCR_STKOFHFNMIGN_Msk           (1UL << SCB_CCR_STKOFHFNMIGN_Pos)              /*!< SCB CCR: STKOFHFNMIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_HARDFAULTPENDED_Pos      21U                                            /*!< SCB SHCSR: HARDFAULTPENDED Position */
+#define SCB_SHCSR_HARDFAULTPENDED_Msk      (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos)         /*!< SCB SHCSR: HARDFAULTPENDED Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_NMIACT_Pos                5U                                            /*!< SCB SHCSR: NMIACT Position */
+#define SCB_SHCSR_NMIACT_Msk               (1UL << SCB_SHCSR_NMIACT_Pos)                  /*!< SCB SHCSR: NMIACT Mask */
+
+#define SCB_SHCSR_HARDFAULTACT_Pos          2U                                            /*!< SCB SHCSR: HARDFAULTACT Position */
+#define SCB_SHCSR_HARDFAULTACT_Msk         (1UL << SCB_SHCSR_HARDFAULTACT_Pos)            /*!< SCB SHCSR: HARDFAULTACT Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+        uint32_t RESERVED0[6U];
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+        uint32_t RESERVED3[1U];
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+        uint32_t RESERVED5[1U];
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED6[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+        uint32_t RESERVED7[1U];
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+        uint32_t RESERVED8[1U];
+  __IOM uint32_t COMP4;                  /*!< Offset: 0x060 (R/W)  Comparator Register 4 */
+        uint32_t RESERVED9[1U];
+  __IOM uint32_t FUNCTION4;              /*!< Offset: 0x068 (R/W)  Function Register 4 */
+        uint32_t RESERVED10[1U];
+  __IOM uint32_t COMP5;                  /*!< Offset: 0x070 (R/W)  Comparator Register 5 */
+        uint32_t RESERVED11[1U];
+  __IOM uint32_t FUNCTION5;              /*!< Offset: 0x078 (R/W)  Function Register 5 */
+        uint32_t RESERVED12[1U];
+  __IOM uint32_t COMP6;                  /*!< Offset: 0x080 (R/W)  Comparator Register 6 */
+        uint32_t RESERVED13[1U];
+  __IOM uint32_t FUNCTION6;              /*!< Offset: 0x088 (R/W)  Function Register 6 */
+        uint32_t RESERVED14[1U];
+  __IOM uint32_t COMP7;                  /*!< Offset: 0x090 (R/W)  Comparator Register 7 */
+        uint32_t RESERVED15[1U];
+  __IOM uint32_t FUNCTION7;              /*!< Offset: 0x098 (R/W)  Function Register 7 */
+        uint32_t RESERVED16[1U];
+  __IOM uint32_t COMP8;                  /*!< Offset: 0x0A0 (R/W)  Comparator Register 8 */
+        uint32_t RESERVED17[1U];
+  __IOM uint32_t FUNCTION8;              /*!< Offset: 0x0A8 (R/W)  Function Register 8 */
+        uint32_t RESERVED18[1U];
+  __IOM uint32_t COMP9;                  /*!< Offset: 0x0B0 (R/W)  Comparator Register 9 */
+        uint32_t RESERVED19[1U];
+  __IOM uint32_t FUNCTION9;              /*!< Offset: 0x0B8 (R/W)  Function Register 9 */
+        uint32_t RESERVED20[1U];
+  __IOM uint32_t COMP10;                 /*!< Offset: 0x0C0 (R/W)  Comparator Register 10 */
+        uint32_t RESERVED21[1U];
+  __IOM uint32_t FUNCTION10;             /*!< Offset: 0x0C8 (R/W)  Function Register 10 */
+        uint32_t RESERVED22[1U];
+  __IOM uint32_t COMP11;                 /*!< Offset: 0x0D0 (R/W)  Comparator Register 11 */
+        uint32_t RESERVED23[1U];
+  __IOM uint32_t FUNCTION11;             /*!< Offset: 0x0D8 (R/W)  Function Register 11 */
+        uint32_t RESERVED24[1U];
+  __IOM uint32_t COMP12;                 /*!< Offset: 0x0E0 (R/W)  Comparator Register 12 */
+        uint32_t RESERVED25[1U];
+  __IOM uint32_t FUNCTION12;             /*!< Offset: 0x0E8 (R/W)  Function Register 12 */
+        uint32_t RESERVED26[1U];
+  __IOM uint32_t COMP13;                 /*!< Offset: 0x0F0 (R/W)  Comparator Register 13 */
+        uint32_t RESERVED27[1U];
+  __IOM uint32_t FUNCTION13;             /*!< Offset: 0x0F8 (R/W)  Function Register 13 */
+        uint32_t RESERVED28[1U];
+  __IOM uint32_t COMP14;                 /*!< Offset: 0x100 (R/W)  Comparator Register 14 */
+        uint32_t RESERVED29[1U];
+  __IOM uint32_t FUNCTION14;             /*!< Offset: 0x108 (R/W)  Function Register 14 */
+        uint32_t RESERVED30[1U];
+  __IOM uint32_t COMP15;                 /*!< Offset: 0x110 (R/W)  Comparator Register 15 */
+        uint32_t RESERVED31[1U];
+  __IOM uint32_t FUNCTION15;             /*!< Offset: 0x118 (R/W)  Function Register 15 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_ID_Pos                27U                                         /*!< DWT FUNCTION: ID Position */
+#define DWT_FUNCTION_ID_Msk                (0x1FUL << DWT_FUNCTION_ID_Pos)             /*!< DWT FUNCTION: ID Mask */
+
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_ACTION_Pos             4U                                         /*!< DWT FUNCTION: ACTION Position */
+#define DWT_FUNCTION_ACTION_Msk            (0x3UL << DWT_FUNCTION_ACTION_Pos)          /*!< DWT FUNCTION: ACTION Mask */
+
+#define DWT_FUNCTION_MATCH_Pos              0U                                         /*!< DWT FUNCTION: MATCH Position */
+#define DWT_FUNCTION_MATCH_Msk             (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/)       /*!< DWT FUNCTION: MATCH Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Sizes Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Sizes Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IOM uint32_t PSCR;                   /*!< Offset: 0x308 (R/W)  Periodic Synchronization Control Register */
+        uint32_t RESERVED3[809U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  Software Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  Software Lock Status Register */
+        uint32_t RESERVED4[4U];
+  __IM  uint32_t TYPE;                   /*!< Offset: 0xFC8 (R/ )  Device Identifier Register */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  Device Type Register */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_SWOSCALER_Pos              0U                                         /*!< TPI ACPR: SWOSCALER Position */
+#define TPI_ACPR_SWOSCALER_Msk             (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/)    /*!< TPI ACPR: SWOSCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_FOnMan_Pos                 6U                                         /*!< TPI FFCR: FOnMan Position */
+#define TPI_FFCR_FOnMan_Msk                (0x1UL << TPI_FFCR_FOnMan_Pos)              /*!< TPI FFCR: FOnMan Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI Periodic Synchronization Control Register Definitions */
+#define TPI_PSCR_PSCount_Pos                0U                                         /*!< TPI PSCR: PSCount Position */
+#define TPI_PSCR_PSCount_Msk               (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/)        /*!< TPI PSCR: TPSCount Mask */
+
+/* TPI Software Lock Status Register Definitions */
+#define TPI_LSR_nTT_Pos                     1U                                         /*!< TPI LSR: Not thirty-two bit. Position */
+#define TPI_LSR_nTT_Msk                    (0x1UL << TPI_LSR_nTT_Pos)                  /*!< TPI LSR: Not thirty-two bit. Mask */
+
+#define TPI_LSR_SLK_Pos                     1U                                         /*!< TPI LSR: Software Lock status Position */
+#define TPI_LSR_SLK_Msk                    (0x1UL << TPI_LSR_SLK_Pos)                  /*!< TPI LSR: Software Lock status Mask */
+
+#define TPI_LSR_SLI_Pos                     0U                                         /*!< TPI LSR: Software Lock implemented Position */
+#define TPI_LSR_SLI_Msk                    (0x1UL /*<< TPI_LSR_SLI_Pos*/)              /*!< TPI LSR: Software Lock implemented Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_FIFOSZ_Pos                6U                                         /*!< TPI DEVID: FIFO depth Position */
+#define TPI_DEVID_FIFOSZ_Msk               (0x7UL << TPI_DEVID_FIFOSZ_Pos)             /*!< TPI DEVID: FIFO depth Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  MPU Region Limit Address Register */
+        uint32_t RESERVED0[7U];
+  union {
+  __IOM uint32_t MAIR[2];
+  struct {
+  __IOM uint32_t MAIR0;                  /*!< Offset: 0x030 (R/W)  MPU Memory Attribute Indirection Register 0 */
+  __IOM uint32_t MAIR1;                  /*!< Offset: 0x034 (R/W)  MPU Memory Attribute Indirection Register 1 */
+  };
+  };
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  1U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_BASE_Pos                   5U                                            /*!< MPU RBAR: BASE Position */
+#define MPU_RBAR_BASE_Msk                  (0x7FFFFFFUL << MPU_RBAR_BASE_Pos)             /*!< MPU RBAR: BASE Mask */
+
+#define MPU_RBAR_SH_Pos                     3U                                            /*!< MPU RBAR: SH Position */
+#define MPU_RBAR_SH_Msk                    (0x3UL << MPU_RBAR_SH_Pos)                     /*!< MPU RBAR: SH Mask */
+
+#define MPU_RBAR_AP_Pos                     1U                                            /*!< MPU RBAR: AP Position */
+#define MPU_RBAR_AP_Msk                    (0x3UL << MPU_RBAR_AP_Pos)                     /*!< MPU RBAR: AP Mask */
+
+#define MPU_RBAR_XN_Pos                     0U                                            /*!< MPU RBAR: XN Position */
+#define MPU_RBAR_XN_Msk                    (01UL /*<< MPU_RBAR_XN_Pos*/)                  /*!< MPU RBAR: XN Mask */
+
+/* MPU Region Limit Address Register Definitions */
+#define MPU_RLAR_LIMIT_Pos                  5U                                            /*!< MPU RLAR: LIMIT Position */
+#define MPU_RLAR_LIMIT_Msk                 (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos)            /*!< MPU RLAR: LIMIT Mask */
+
+#define MPU_RLAR_AttrIndx_Pos               1U                                            /*!< MPU RLAR: AttrIndx Position */
+#define MPU_RLAR_AttrIndx_Msk              (0x7UL << MPU_RLAR_AttrIndx_Pos)               /*!< MPU RLAR: AttrIndx Mask */
+
+#define MPU_RLAR_EN_Pos                     0U                                            /*!< MPU RLAR: EN Position */
+#define MPU_RLAR_EN_Msk                    (1UL /*<< MPU_RLAR_EN_Pos*/)                   /*!< MPU RLAR: EN Mask */
+
+/* MPU Memory Attribute Indirection Register 0 Definitions */
+#define MPU_MAIR0_Attr3_Pos                24U                                            /*!< MPU MAIR0: Attr3 Position */
+#define MPU_MAIR0_Attr3_Msk                (0xFFUL << MPU_MAIR0_Attr3_Pos)                /*!< MPU MAIR0: Attr3 Mask */
+
+#define MPU_MAIR0_Attr2_Pos                16U                                            /*!< MPU MAIR0: Attr2 Position */
+#define MPU_MAIR0_Attr2_Msk                (0xFFUL << MPU_MAIR0_Attr2_Pos)                /*!< MPU MAIR0: Attr2 Mask */
+
+#define MPU_MAIR0_Attr1_Pos                 8U                                            /*!< MPU MAIR0: Attr1 Position */
+#define MPU_MAIR0_Attr1_Msk                (0xFFUL << MPU_MAIR0_Attr1_Pos)                /*!< MPU MAIR0: Attr1 Mask */
+
+#define MPU_MAIR0_Attr0_Pos                 0U                                            /*!< MPU MAIR0: Attr0 Position */
+#define MPU_MAIR0_Attr0_Msk                (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/)            /*!< MPU MAIR0: Attr0 Mask */
+
+/* MPU Memory Attribute Indirection Register 1 Definitions */
+#define MPU_MAIR1_Attr7_Pos                24U                                            /*!< MPU MAIR1: Attr7 Position */
+#define MPU_MAIR1_Attr7_Msk                (0xFFUL << MPU_MAIR1_Attr7_Pos)                /*!< MPU MAIR1: Attr7 Mask */
+
+#define MPU_MAIR1_Attr6_Pos                16U                                            /*!< MPU MAIR1: Attr6 Position */
+#define MPU_MAIR1_Attr6_Msk                (0xFFUL << MPU_MAIR1_Attr6_Pos)                /*!< MPU MAIR1: Attr6 Mask */
+
+#define MPU_MAIR1_Attr5_Pos                 8U                                            /*!< MPU MAIR1: Attr5 Position */
+#define MPU_MAIR1_Attr5_Msk                (0xFFUL << MPU_MAIR1_Attr5_Pos)                /*!< MPU MAIR1: Attr5 Mask */
+
+#define MPU_MAIR1_Attr4_Pos                 0U                                            /*!< MPU MAIR1: Attr4 Position */
+#define MPU_MAIR1_Attr4_Msk                (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/)            /*!< MPU MAIR1: Attr4 Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SAU     Security Attribution Unit (SAU)
+  \brief    Type definitions for the Security Attribution Unit (SAU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Security Attribution Unit (SAU).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SAU Control Register */
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x004 (R/ )  SAU Type Register */
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  SAU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  SAU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  SAU Region Limit Address Register */
+#endif
+} SAU_Type;
+
+/* SAU Control Register Definitions */
+#define SAU_CTRL_ALLNS_Pos                  1U                                            /*!< SAU CTRL: ALLNS Position */
+#define SAU_CTRL_ALLNS_Msk                 (1UL << SAU_CTRL_ALLNS_Pos)                    /*!< SAU CTRL: ALLNS Mask */
+
+#define SAU_CTRL_ENABLE_Pos                 0U                                            /*!< SAU CTRL: ENABLE Position */
+#define SAU_CTRL_ENABLE_Msk                (1UL /*<< SAU_CTRL_ENABLE_Pos*/)               /*!< SAU CTRL: ENABLE Mask */
+
+/* SAU Type Register Definitions */
+#define SAU_TYPE_SREGION_Pos                0U                                            /*!< SAU TYPE: SREGION Position */
+#define SAU_TYPE_SREGION_Msk               (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/)           /*!< SAU TYPE: SREGION Mask */
+
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+/* SAU Region Number Register Definitions */
+#define SAU_RNR_REGION_Pos                  0U                                            /*!< SAU RNR: REGION Position */
+#define SAU_RNR_REGION_Msk                 (0xFFUL /*<< SAU_RNR_REGION_Pos*/)             /*!< SAU RNR: REGION Mask */
+
+/* SAU Region Base Address Register Definitions */
+#define SAU_RBAR_BADDR_Pos                  5U                                            /*!< SAU RBAR: BADDR Position */
+#define SAU_RBAR_BADDR_Msk                 (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos)            /*!< SAU RBAR: BADDR Mask */
+
+/* SAU Region Limit Address Register Definitions */
+#define SAU_RLAR_LADDR_Pos                  5U                                            /*!< SAU RLAR: LADDR Position */
+#define SAU_RLAR_LADDR_Msk                 (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos)            /*!< SAU RLAR: LADDR Mask */
+
+#define SAU_RLAR_NSC_Pos                    1U                                            /*!< SAU RLAR: NSC Position */
+#define SAU_RLAR_NSC_Msk                   (1UL << SAU_RLAR_NSC_Pos)                      /*!< SAU RLAR: NSC Mask */
+
+#define SAU_RLAR_ENABLE_Pos                 0U                                            /*!< SAU RLAR: ENABLE Position */
+#define SAU_RLAR_ENABLE_Msk                (1UL /*<< SAU_RLAR_ENABLE_Pos*/)               /*!< SAU RLAR: ENABLE Mask */
+
+#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */
+
+/*@} end of group CMSIS_SAU */
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t DAUTHCTRL;              /*!< Offset: 0x014 (R/W)  Debug Authentication Control Register */
+  __IOM uint32_t DSCSR;                  /*!< Offset: 0x018 (R/W)  Debug Security Control and Status Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESTART_ST_Pos   26U                                            /*!< CoreDebug DHCSR: S_RESTART_ST Position */
+#define CoreDebug_DHCSR_S_RESTART_ST_Msk   (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos)      /*!< CoreDebug DHCSR: S_RESTART_ST Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_DWTENA_Pos         24U                                            /*!< CoreDebug DEMCR: DWTENA Position */
+#define CoreDebug_DEMCR_DWTENA_Msk         (1UL << CoreDebug_DEMCR_DWTENA_Pos)            /*!< CoreDebug DEMCR: DWTENA Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/* Debug Authentication Control Register Definitions */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos  3U                                            /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos)    /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */
+
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos  2U                                            /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos)    /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */
+
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos   1U                                            /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk  (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos)     /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */
+
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos   0U                                            /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk  (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */
+
+/* Debug Security Control and Status Register Definitions */
+#define CoreDebug_DSCSR_CDS_Pos            16U                                            /*!< CoreDebug DSCSR: CDS Position */
+#define CoreDebug_DSCSR_CDS_Msk            (1UL << CoreDebug_DSCSR_CDS_Pos)               /*!< CoreDebug DSCSR: CDS Mask */
+
+#define CoreDebug_DSCSR_SBRSEL_Pos          1U                                            /*!< CoreDebug DSCSR: SBRSEL Position */
+#define CoreDebug_DSCSR_SBRSEL_Msk         (1UL << CoreDebug_DSCSR_SBRSEL_Pos)            /*!< CoreDebug DSCSR: SBRSEL Mask */
+
+#define CoreDebug_DSCSR_SBRSELEN_Pos        0U                                            /*!< CoreDebug DSCSR: SBRSELEN Position */
+#define CoreDebug_DSCSR_SBRSELEN_Msk       (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/)      /*!< CoreDebug DSCSR: SBRSELEN Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+  #define SCS_BASE            (0xE000E000UL)                             /*!< System Control Space Base Address */
+  #define DWT_BASE            (0xE0001000UL)                             /*!< DWT Base Address */
+  #define TPI_BASE            (0xE0040000UL)                             /*!< TPI Base Address */
+  #define CoreDebug_BASE      (0xE000EDF0UL)                             /*!< Core Debug Base Address */
+  #define SysTick_BASE        (SCS_BASE +  0x0010UL)                     /*!< SysTick Base Address */
+  #define NVIC_BASE           (SCS_BASE +  0x0100UL)                     /*!< NVIC Base Address */
+  #define SCB_BASE            (SCS_BASE +  0x0D00UL)                     /*!< System Control Block Base Address */
+
+
+  #define SCB                 ((SCB_Type       *)     SCB_BASE         ) /*!< SCB configuration struct */
+  #define SysTick             ((SysTick_Type   *)     SysTick_BASE     ) /*!< SysTick configuration struct */
+  #define NVIC                ((NVIC_Type      *)     NVIC_BASE        ) /*!< NVIC configuration struct */
+  #define DWT                 ((DWT_Type       *)     DWT_BASE         ) /*!< DWT configuration struct */
+  #define TPI                 ((TPI_Type       *)     TPI_BASE         ) /*!< TPI configuration struct */
+  #define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE   ) /*!< Core Debug configuration struct */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE          (SCS_BASE +  0x0D90UL)                     /*!< Memory Protection Unit */
+    #define MPU               ((MPU_Type       *)     MPU_BASE         ) /*!< Memory Protection Unit */
+  #endif
+
+  #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+    #define SAU_BASE          (SCS_BASE +  0x0DD0UL)                     /*!< Security Attribution Unit */
+    #define SAU               ((SAU_Type       *)     SAU_BASE         ) /*!< Security Attribution Unit */
+  #endif
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+  #define SCS_BASE_NS         (0xE002E000UL)                             /*!< System Control Space Base Address (non-secure address space) */
+  #define CoreDebug_BASE_NS   (0xE002EDF0UL)                             /*!< Core Debug Base Address           (non-secure address space) */
+  #define SysTick_BASE_NS     (SCS_BASE_NS +  0x0010UL)                  /*!< SysTick Base Address              (non-secure address space) */
+  #define NVIC_BASE_NS        (SCS_BASE_NS +  0x0100UL)                  /*!< NVIC Base Address                 (non-secure address space) */
+  #define SCB_BASE_NS         (SCS_BASE_NS +  0x0D00UL)                  /*!< System Control Block Base Address (non-secure address space) */
+
+  #define SCB_NS              ((SCB_Type       *)     SCB_BASE_NS      ) /*!< SCB configuration struct          (non-secure address space) */
+  #define SysTick_NS          ((SysTick_Type   *)     SysTick_BASE_NS  ) /*!< SysTick configuration struct      (non-secure address space) */
+  #define NVIC_NS             ((NVIC_Type      *)     NVIC_BASE_NS     ) /*!< NVIC configuration struct         (non-secure address space) */
+  #define CoreDebug_NS        ((CoreDebug_Type *)     CoreDebug_BASE_NS) /*!< Core Debug configuration struct   (non-secure address space) */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE_NS       (SCS_BASE_NS +  0x0D90UL)                  /*!< Memory Protection Unit            (non-secure address space) */
+    #define MPU_NS            ((MPU_Type       *)     MPU_BASE_NS      ) /*!< Memory Protection Unit            (non-secure address space) */
+  #endif
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* Special LR values for Secure/Non-Secure call handling and exception handling                                               */
+
+/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS                   */
+#define FNC_RETURN                 (0xFEFFFFFFUL)     /* bit [0] ignored when processing a branch                             */
+
+/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */
+#define EXC_RETURN_PREFIX          (0xFF000000UL)     /* bits [31:24] set to indicate an EXC_RETURN value                     */
+#define EXC_RETURN_S               (0x00000040UL)     /* bit [6] stack used to push registers: 0=Non-secure 1=Secure          */
+#define EXC_RETURN_DCRS            (0x00000020UL)     /* bit [5] stacking rules for called registers: 0=skipped 1=saved       */
+#define EXC_RETURN_FTYPE           (0x00000010UL)     /* bit [4] allocate stack for floating-point context: 0=done 1=skipped  */
+#define EXC_RETURN_MODE            (0x00000008UL)     /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode      */
+#define EXC_RETURN_SPSEL           (0x00000002UL)     /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP           */
+#define EXC_RETURN_ES              (0x00000001UL)     /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */
+
+/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking                            */
+#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)  /* Value for processors with floating-point extension:                  */
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125AUL)     /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE                   */
+#else
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125BUL)     /* Value for processors without floating-point extension                */
+#endif
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Get Interrupt Target State
+  \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+  \return             1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Target State
+  \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |=  ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Clear Interrupt Target State
+  \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IPR[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+           If VTOR is not present address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+#else
+  uint32_t *vectors = (uint32_t *)0x0U;
+#endif
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+#else
+  uint32_t *vectors = (uint32_t *)0x0U;
+#endif
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Enable Interrupt (non-secure)
+  \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status (non-secure)
+  \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt (non-secure)
+  \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt (non-secure)
+  \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt (non-secure)
+  \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt (non-secure)
+  \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt (non-secure)
+  \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority (non-secure)
+  \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every non-secure processor exception.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->IPR[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority (non-secure)
+  \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+#endif /*  defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv8.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##########################   SAU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SAUFunctions SAU Functions
+  \brief    Functions that configure the SAU.
+  @{
+ */
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+
+/**
+  \brief   Enable SAU
+  \details Enables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Enable(void)
+{
+    SAU->CTRL |=  (SAU_CTRL_ENABLE_Msk);
+}
+
+
+
+/**
+  \brief   Disable SAU
+  \details Disables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Disable(void)
+{
+    SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk);
+}
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_SAUFunctions */
+
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   System Tick Configuration (non-secure)
+  \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>TZ_SysTick_Config_NS</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                         /* Reload value impossible */
+  }
+
+  SysTick_NS->LOAD  = (uint32_t)(ticks - 1UL);                            /* set reload register */
+  TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick_NS->VAL   = 0UL;                                                /* Load the SysTick Counter Value */
+  SysTick_NS->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                      SysTick_CTRL_TICKINT_Msk   |
+                      SysTick_CTRL_ENABLE_Msk;                            /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                           /* Function successful */
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_ARMV8MBL_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

Soft/STM32/Controle/Drivers/CMSIS/Include/core_armv8mml.h

@@ -0,0 +1,2927 @@
+/**************************************************************************//**
+ * @file     core_armv8mml.h
+ * @brief    CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File
+ * @version  V5.0.7
+ * @date     06. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_ARMV8MML_H_GENERIC
+#define __CORE_ARMV8MML_H_GENERIC
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_ARMv8MML
+  @{
+ */
+
+#include "cmsis_version.h"
+
+/*  CMSIS Armv8MML definitions */
+#define __ARMv8MML_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                   /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __ARMv8MML_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)                    /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __ARMv8MML_CMSIS_VERSION       ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \
+                                         __ARMv8MML_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                     (81U)                                       /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined(__ARM_FEATURE_DSP)
+    #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined(__ARM_FEATURE_DSP)
+    #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined(__ARM_FEATURE_DSP)
+    #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined(__ARM_FEATURE_DSP)
+    #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_ARMV8MML_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_ARMV8MML_H_DEPENDANT
+#define __CORE_ARMV8MML_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __ARMv8MML_REV
+    #define __ARMv8MML_REV               0x0000U
+    #warning "__ARMv8MML_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             0U
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __SAUREGION_PRESENT
+    #define __SAUREGION_PRESENT       0U
+    #warning "__SAUREGION_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __DSP_PRESENT
+    #define __DSP_PRESENT             0U
+    #warning "__DSP_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          3U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group ARMv8MML */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core SAU Register
+  - Core FPU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:7;               /*!< bit: 20..26  Reserved */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27U                                            /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos                        16U                                            /*!< APSR: GE Position */
+#define APSR_GE_Msk                        (0xFUL << APSR_GE_Pos)                         /*!< APSR: GE Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:7;               /*!< bit:  9..15  Reserved */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0) */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27U                                            /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos                        25U                                            /*!< xPSR: IT Position */
+#define xPSR_IT_Msk                        (3UL << xPSR_IT_Pos)                           /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos                        16U                                            /*!< xPSR: GE Position */
+#define xPSR_GE_Msk                        (0xFUL << xPSR_GE_Pos)                         /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack-pointer select */
+    uint32_t FPCA:1;                     /*!< bit:      2  Floating-point context active */
+    uint32_t SFPA:1;                     /*!< bit:      3  Secure floating-point active */
+    uint32_t _reserved1:28;              /*!< bit:  4..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SFPA_Pos                    3U                                            /*!< CONTROL: SFPA Position */
+#define CONTROL_SFPA_Msk                   (1UL << CONTROL_SFPA_Pos)                      /*!< CONTROL: SFPA Mask */
+
+#define CONTROL_FPCA_Pos                    2U                                            /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk                   (1UL << CONTROL_FPCA_Pos)                      /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[16U];              /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[16U];
+  __IOM uint32_t ICER[16U];              /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[16U];
+  __IOM uint32_t ISPR[16U];              /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[16U];
+  __IOM uint32_t ICPR[16U];              /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[16U];
+  __IOM uint32_t IABR[16U];              /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[16U];
+  __IOM uint32_t ITNS[16U];              /*!< Offset: 0x280 (R/W)  Interrupt Non-Secure State Register */
+        uint32_t RESERVED5[16U];
+  __IOM uint8_t  IPR[496U];              /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+        uint32_t RESERVED6[580U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0U                                         /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+  __IOM uint8_t  SHPR[12U];              /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+  __IOM uint32_t CFSR;                   /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register */
+  __IOM uint32_t HFSR;                   /*!< Offset: 0x02C (R/W)  HardFault Status Register */
+  __IOM uint32_t DFSR;                   /*!< Offset: 0x030 (R/W)  Debug Fault Status Register */
+  __IOM uint32_t MMFAR;                  /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register */
+  __IOM uint32_t BFAR;                   /*!< Offset: 0x038 (R/W)  BusFault Address Register */
+  __IOM uint32_t AFSR;                   /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register */
+  __IM  uint32_t ID_PFR[2U];             /*!< Offset: 0x040 (R/ )  Processor Feature Register */
+  __IM  uint32_t ID_DFR;                 /*!< Offset: 0x048 (R/ )  Debug Feature Register */
+  __IM  uint32_t ID_ADR;                 /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register */
+  __IM  uint32_t ID_MMFR[4U];            /*!< Offset: 0x050 (R/ )  Memory Model Feature Register */
+  __IM  uint32_t ID_ISAR[6U];            /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register */
+  __IM  uint32_t CLIDR;                  /*!< Offset: 0x078 (R/ )  Cache Level ID register */
+  __IM  uint32_t CTR;                    /*!< Offset: 0x07C (R/ )  Cache Type register */
+  __IM  uint32_t CCSIDR;                 /*!< Offset: 0x080 (R/ )  Cache Size ID Register */
+  __IOM uint32_t CSSELR;                 /*!< Offset: 0x084 (R/W)  Cache Size Selection Register */
+  __IOM uint32_t CPACR;                  /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register */
+  __IOM uint32_t NSACR;                  /*!< Offset: 0x08C (R/W)  Non-Secure Access Control Register */
+        uint32_t RESERVED3[92U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0x200 ( /W)  Software Triggered Interrupt Register */
+        uint32_t RESERVED4[15U];
+  __IM  uint32_t MVFR0;                  /*!< Offset: 0x240 (R/ )  Media and VFP Feature Register 0 */
+  __IM  uint32_t MVFR1;                  /*!< Offset: 0x244 (R/ )  Media and VFP Feature Register 1 */
+  __IM  uint32_t MVFR2;                  /*!< Offset: 0x248 (R/ )  Media and VFP Feature Register 2 */
+        uint32_t RESERVED5[1U];
+  __OM  uint32_t ICIALLU;                /*!< Offset: 0x250 ( /W)  I-Cache Invalidate All to PoU */
+        uint32_t RESERVED6[1U];
+  __OM  uint32_t ICIMVAU;                /*!< Offset: 0x258 ( /W)  I-Cache Invalidate by MVA to PoU */
+  __OM  uint32_t DCIMVAC;                /*!< Offset: 0x25C ( /W)  D-Cache Invalidate by MVA to PoC */
+  __OM  uint32_t DCISW;                  /*!< Offset: 0x260 ( /W)  D-Cache Invalidate by Set-way */
+  __OM  uint32_t DCCMVAU;                /*!< Offset: 0x264 ( /W)  D-Cache Clean by MVA to PoU */
+  __OM  uint32_t DCCMVAC;                /*!< Offset: 0x268 ( /W)  D-Cache Clean by MVA to PoC */
+  __OM  uint32_t DCCSW;                  /*!< Offset: 0x26C ( /W)  D-Cache Clean by Set-way */
+  __OM  uint32_t DCCIMVAC;               /*!< Offset: 0x270 ( /W)  D-Cache Clean and Invalidate by MVA to PoC */
+  __OM  uint32_t DCCISW;                 /*!< Offset: 0x274 ( /W)  D-Cache Clean and Invalidate by Set-way */
+        uint32_t RESERVED7[6U];
+  __IOM uint32_t ITCMCR;                 /*!< Offset: 0x290 (R/W)  Instruction Tightly-Coupled Memory Control Register */
+  __IOM uint32_t DTCMCR;                 /*!< Offset: 0x294 (R/W)  Data Tightly-Coupled Memory Control Registers */
+  __IOM uint32_t AHBPCR;                 /*!< Offset: 0x298 (R/W)  AHBP Control Register */
+  __IOM uint32_t CACR;                   /*!< Offset: 0x29C (R/W)  L1 Cache Control Register */
+  __IOM uint32_t AHBSCR;                 /*!< Offset: 0x2A0 (R/W)  AHB Slave Control Register */
+        uint32_t RESERVED8[1U];
+  __IOM uint32_t ABFSR;                  /*!< Offset: 0x2A8 (R/W)  Auxiliary Bus Fault Status Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_PENDNMISET_Pos            31U                                            /*!< SCB ICSR: PENDNMISET Position */
+#define SCB_ICSR_PENDNMISET_Msk            (1UL << SCB_ICSR_PENDNMISET_Pos)               /*!< SCB ICSR: PENDNMISET Mask */
+
+#define SCB_ICSR_NMIPENDSET_Pos            SCB_ICSR_PENDNMISET_Pos                        /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */
+#define SCB_ICSR_NMIPENDSET_Msk            SCB_ICSR_PENDNMISET_Msk                        /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */
+
+#define SCB_ICSR_PENDNMICLR_Pos            30U                                            /*!< SCB ICSR: PENDNMICLR Position */
+#define SCB_ICSR_PENDNMICLR_Msk            (1UL << SCB_ICSR_PENDNMICLR_Pos)               /*!< SCB ICSR: PENDNMICLR Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_STTNS_Pos                 24U                                            /*!< SCB ICSR: STTNS Position (Security Extension) */
+#define SCB_ICSR_STTNS_Msk                 (1UL << SCB_ICSR_STTNS_Pos)                    /*!< SCB ICSR: STTNS Mask (Security Extension) */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIS_Pos                 14U                                            /*!< SCB AIRCR: PRIS Position */
+#define SCB_AIRCR_PRIS_Msk                 (1UL << SCB_AIRCR_PRIS_Pos)                    /*!< SCB AIRCR: PRIS Mask */
+
+#define SCB_AIRCR_BFHFNMINS_Pos            13U                                            /*!< SCB AIRCR: BFHFNMINS Position */
+#define SCB_AIRCR_BFHFNMINS_Msk            (1UL << SCB_AIRCR_BFHFNMINS_Pos)               /*!< SCB AIRCR: BFHFNMINS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8U                                            /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQS_Pos          3U                                            /*!< SCB AIRCR: SYSRESETREQS Position */
+#define SCB_AIRCR_SYSRESETREQS_Msk         (1UL << SCB_AIRCR_SYSRESETREQS_Pos)            /*!< SCB AIRCR: SYSRESETREQS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEPS_Pos              3U                                            /*!< SCB SCR: SLEEPDEEPS Position */
+#define SCB_SCR_SLEEPDEEPS_Msk             (1UL << SCB_SCR_SLEEPDEEPS_Pos)                /*!< SCB SCR: SLEEPDEEPS Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos                     18U                                            /*!< SCB CCR: BP Position */
+#define SCB_CCR_BP_Msk                     (1UL << SCB_CCR_BP_Pos)                        /*!< SCB CCR: BP Mask */
+
+#define SCB_CCR_IC_Pos                     17U                                            /*!< SCB CCR: IC Position */
+#define SCB_CCR_IC_Msk                     (1UL << SCB_CCR_IC_Pos)                        /*!< SCB CCR: IC Mask */
+
+#define SCB_CCR_DC_Pos                     16U                                            /*!< SCB CCR: DC Position */
+#define SCB_CCR_DC_Msk                     (1UL << SCB_CCR_DC_Pos)                        /*!< SCB CCR: DC Mask */
+
+#define SCB_CCR_STKOFHFNMIGN_Pos           10U                                            /*!< SCB CCR: STKOFHFNMIGN Position */
+#define SCB_CCR_STKOFHFNMIGN_Msk           (1UL << SCB_CCR_STKOFHFNMIGN_Pos)              /*!< SCB CCR: STKOFHFNMIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_HARDFAULTPENDED_Pos      21U                                            /*!< SCB SHCSR: HARDFAULTPENDED Position */
+#define SCB_SHCSR_HARDFAULTPENDED_Msk      (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos)         /*!< SCB SHCSR: HARDFAULTPENDED Mask */
+
+#define SCB_SHCSR_SECUREFAULTPENDED_Pos    20U                                            /*!< SCB SHCSR: SECUREFAULTPENDED Position */
+#define SCB_SHCSR_SECUREFAULTPENDED_Msk    (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos)       /*!< SCB SHCSR: SECUREFAULTPENDED Mask */
+
+#define SCB_SHCSR_SECUREFAULTENA_Pos       19U                                            /*!< SCB SHCSR: SECUREFAULTENA Position */
+#define SCB_SHCSR_SECUREFAULTENA_Msk       (1UL << SCB_SHCSR_SECUREFAULTENA_Pos)          /*!< SCB SHCSR: SECUREFAULTENA Mask */
+
+#define SCB_SHCSR_USGFAULTENA_Pos          18U                                            /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17U                                            /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16U                                            /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14U                                            /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13U                                            /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12U                                            /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8U                                            /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_NMIACT_Pos                5U                                            /*!< SCB SHCSR: NMIACT Position */
+#define SCB_SHCSR_NMIACT_Msk               (1UL << SCB_SHCSR_NMIACT_Pos)                  /*!< SCB SHCSR: NMIACT Mask */
+
+#define SCB_SHCSR_SECUREFAULTACT_Pos        4U                                            /*!< SCB SHCSR: SECUREFAULTACT Position */
+#define SCB_SHCSR_SECUREFAULTACT_Msk       (1UL << SCB_SHCSR_SECUREFAULTACT_Pos)          /*!< SCB SHCSR: SECUREFAULTACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3U                                            /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_HARDFAULTACT_Pos          2U                                            /*!< SCB SHCSR: HARDFAULTACT Position */
+#define SCB_SHCSR_HARDFAULTACT_Msk         (1UL << SCB_SHCSR_HARDFAULTACT_Pos)            /*!< SCB SHCSR: HARDFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1U                                            /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0U                                            /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16U                                            /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8U                                            /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0U                                            /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_MMARVALID_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 7U)               /*!< SCB CFSR (MMFSR): MMARVALID Position */
+#define SCB_CFSR_MMARVALID_Msk             (1UL << SCB_CFSR_MMARVALID_Pos)                /*!< SCB CFSR (MMFSR): MMARVALID Mask */
+
+#define SCB_CFSR_MLSPERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 5U)               /*!< SCB CFSR (MMFSR): MLSPERR Position */
+#define SCB_CFSR_MLSPERR_Msk               (1UL << SCB_CFSR_MLSPERR_Pos)                  /*!< SCB CFSR (MMFSR): MLSPERR Mask */
+
+#define SCB_CFSR_MSTKERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 4U)               /*!< SCB CFSR (MMFSR): MSTKERR Position */
+#define SCB_CFSR_MSTKERR_Msk               (1UL << SCB_CFSR_MSTKERR_Pos)                  /*!< SCB CFSR (MMFSR): MSTKERR Mask */
+
+#define SCB_CFSR_MUNSTKERR_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 3U)               /*!< SCB CFSR (MMFSR): MUNSTKERR Position */
+#define SCB_CFSR_MUNSTKERR_Msk             (1UL << SCB_CFSR_MUNSTKERR_Pos)                /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */
+
+#define SCB_CFSR_DACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 1U)               /*!< SCB CFSR (MMFSR): DACCVIOL Position */
+#define SCB_CFSR_DACCVIOL_Msk              (1UL << SCB_CFSR_DACCVIOL_Pos)                 /*!< SCB CFSR (MMFSR): DACCVIOL Mask */
+
+#define SCB_CFSR_IACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 0U)               /*!< SCB CFSR (MMFSR): IACCVIOL Position */
+#define SCB_CFSR_IACCVIOL_Msk              (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/)             /*!< SCB CFSR (MMFSR): IACCVIOL Mask */
+
+/* BusFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_BFARVALID_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 7U)                  /*!< SCB CFSR (BFSR): BFARVALID Position */
+#define SCB_CFSR_BFARVALID_Msk            (1UL << SCB_CFSR_BFARVALID_Pos)                 /*!< SCB CFSR (BFSR): BFARVALID Mask */
+
+#define SCB_CFSR_LSPERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 5U)                  /*!< SCB CFSR (BFSR): LSPERR Position */
+#define SCB_CFSR_LSPERR_Msk               (1UL << SCB_CFSR_LSPERR_Pos)                    /*!< SCB CFSR (BFSR): LSPERR Mask */
+
+#define SCB_CFSR_STKERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 4U)                  /*!< SCB CFSR (BFSR): STKERR Position */
+#define SCB_CFSR_STKERR_Msk               (1UL << SCB_CFSR_STKERR_Pos)                    /*!< SCB CFSR (BFSR): STKERR Mask */
+
+#define SCB_CFSR_UNSTKERR_Pos             (SCB_CFSR_BUSFAULTSR_Pos + 3U)                  /*!< SCB CFSR (BFSR): UNSTKERR Position */
+#define SCB_CFSR_UNSTKERR_Msk             (1UL << SCB_CFSR_UNSTKERR_Pos)                  /*!< SCB CFSR (BFSR): UNSTKERR Mask */
+
+#define SCB_CFSR_IMPRECISERR_Pos          (SCB_CFSR_BUSFAULTSR_Pos + 2U)                  /*!< SCB CFSR (BFSR): IMPRECISERR Position */
+#define SCB_CFSR_IMPRECISERR_Msk          (1UL << SCB_CFSR_IMPRECISERR_Pos)               /*!< SCB CFSR (BFSR): IMPRECISERR Mask */
+
+#define SCB_CFSR_PRECISERR_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 1U)                  /*!< SCB CFSR (BFSR): PRECISERR Position */
+#define SCB_CFSR_PRECISERR_Msk            (1UL << SCB_CFSR_PRECISERR_Pos)                 /*!< SCB CFSR (BFSR): PRECISERR Mask */
+
+#define SCB_CFSR_IBUSERR_Pos              (SCB_CFSR_BUSFAULTSR_Pos + 0U)                  /*!< SCB CFSR (BFSR): IBUSERR Position */
+#define SCB_CFSR_IBUSERR_Msk              (1UL << SCB_CFSR_IBUSERR_Pos)                   /*!< SCB CFSR (BFSR): IBUSERR Mask */
+
+/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_DIVBYZERO_Pos            (SCB_CFSR_USGFAULTSR_Pos + 9U)                  /*!< SCB CFSR (UFSR): DIVBYZERO Position */
+#define SCB_CFSR_DIVBYZERO_Msk            (1UL << SCB_CFSR_DIVBYZERO_Pos)                 /*!< SCB CFSR (UFSR): DIVBYZERO Mask */
+
+#define SCB_CFSR_UNALIGNED_Pos            (SCB_CFSR_USGFAULTSR_Pos + 8U)                  /*!< SCB CFSR (UFSR): UNALIGNED Position */
+#define SCB_CFSR_UNALIGNED_Msk            (1UL << SCB_CFSR_UNALIGNED_Pos)                 /*!< SCB CFSR (UFSR): UNALIGNED Mask */
+
+#define SCB_CFSR_STKOF_Pos                (SCB_CFSR_USGFAULTSR_Pos + 4U)                  /*!< SCB CFSR (UFSR): STKOF Position */
+#define SCB_CFSR_STKOF_Msk                (1UL << SCB_CFSR_STKOF_Pos)                     /*!< SCB CFSR (UFSR): STKOF Mask */
+
+#define SCB_CFSR_NOCP_Pos                 (SCB_CFSR_USGFAULTSR_Pos + 3U)                  /*!< SCB CFSR (UFSR): NOCP Position */
+#define SCB_CFSR_NOCP_Msk                 (1UL << SCB_CFSR_NOCP_Pos)                      /*!< SCB CFSR (UFSR): NOCP Mask */
+
+#define SCB_CFSR_INVPC_Pos                (SCB_CFSR_USGFAULTSR_Pos + 2U)                  /*!< SCB CFSR (UFSR): INVPC Position */
+#define SCB_CFSR_INVPC_Msk                (1UL << SCB_CFSR_INVPC_Pos)                     /*!< SCB CFSR (UFSR): INVPC Mask */
+
+#define SCB_CFSR_INVSTATE_Pos             (SCB_CFSR_USGFAULTSR_Pos + 1U)                  /*!< SCB CFSR (UFSR): INVSTATE Position */
+#define SCB_CFSR_INVSTATE_Msk             (1UL << SCB_CFSR_INVSTATE_Pos)                  /*!< SCB CFSR (UFSR): INVSTATE Mask */
+
+#define SCB_CFSR_UNDEFINSTR_Pos           (SCB_CFSR_USGFAULTSR_Pos + 0U)                  /*!< SCB CFSR (UFSR): UNDEFINSTR Position */
+#define SCB_CFSR_UNDEFINSTR_Msk           (1UL << SCB_CFSR_UNDEFINSTR_Pos)                /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31U                                            /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30U                                            /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1U                                            /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4U                                            /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3U                                            /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2U                                            /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1U                                            /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0U                                            /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/* SCB Non-Secure Access Control Register Definitions */
+#define SCB_NSACR_CP11_Pos                 11U                                            /*!< SCB NSACR: CP11 Position */
+#define SCB_NSACR_CP11_Msk                 (1UL << SCB_NSACR_CP11_Pos)                    /*!< SCB NSACR: CP11 Mask */
+
+#define SCB_NSACR_CP10_Pos                 10U                                            /*!< SCB NSACR: CP10 Position */
+#define SCB_NSACR_CP10_Msk                 (1UL << SCB_NSACR_CP10_Pos)                    /*!< SCB NSACR: CP10 Mask */
+
+#define SCB_NSACR_CPn_Pos                   0U                                            /*!< SCB NSACR: CPn Position */
+#define SCB_NSACR_CPn_Msk                  (1UL /*<< SCB_NSACR_CPn_Pos*/)                 /*!< SCB NSACR: CPn Mask */
+
+/* SCB Cache Level ID Register Definitions */
+#define SCB_CLIDR_LOUU_Pos                 27U                                            /*!< SCB CLIDR: LoUU Position */
+#define SCB_CLIDR_LOUU_Msk                 (7UL << SCB_CLIDR_LOUU_Pos)                    /*!< SCB CLIDR: LoUU Mask */
+
+#define SCB_CLIDR_LOC_Pos                  24U                                            /*!< SCB CLIDR: LoC Position */
+#define SCB_CLIDR_LOC_Msk                  (7UL << SCB_CLIDR_LOC_Pos)                     /*!< SCB CLIDR: LoC Mask */
+
+/* SCB Cache Type Register Definitions */
+#define SCB_CTR_FORMAT_Pos                 29U                                            /*!< SCB CTR: Format Position */
+#define SCB_CTR_FORMAT_Msk                 (7UL << SCB_CTR_FORMAT_Pos)                    /*!< SCB CTR: Format Mask */
+
+#define SCB_CTR_CWG_Pos                    24U                                            /*!< SCB CTR: CWG Position */
+#define SCB_CTR_CWG_Msk                    (0xFUL << SCB_CTR_CWG_Pos)                     /*!< SCB CTR: CWG Mask */
+
+#define SCB_CTR_ERG_Pos                    20U                                            /*!< SCB CTR: ERG Position */
+#define SCB_CTR_ERG_Msk                    (0xFUL << SCB_CTR_ERG_Pos)                     /*!< SCB CTR: ERG Mask */
+
+#define SCB_CTR_DMINLINE_Pos               16U                                            /*!< SCB CTR: DminLine Position */
+#define SCB_CTR_DMINLINE_Msk               (0xFUL << SCB_CTR_DMINLINE_Pos)                /*!< SCB CTR: DminLine Mask */
+
+#define SCB_CTR_IMINLINE_Pos                0U                                            /*!< SCB CTR: ImInLine Position */
+#define SCB_CTR_IMINLINE_Msk               (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/)            /*!< SCB CTR: ImInLine Mask */
+
+/* SCB Cache Size ID Register Definitions */
+#define SCB_CCSIDR_WT_Pos                  31U                                            /*!< SCB CCSIDR: WT Position */
+#define SCB_CCSIDR_WT_Msk                  (1UL << SCB_CCSIDR_WT_Pos)                     /*!< SCB CCSIDR: WT Mask */
+
+#define SCB_CCSIDR_WB_Pos                  30U                                            /*!< SCB CCSIDR: WB Position */
+#define SCB_CCSIDR_WB_Msk                  (1UL << SCB_CCSIDR_WB_Pos)                     /*!< SCB CCSIDR: WB Mask */
+
+#define SCB_CCSIDR_RA_Pos                  29U                                            /*!< SCB CCSIDR: RA Position */
+#define SCB_CCSIDR_RA_Msk                  (1UL << SCB_CCSIDR_RA_Pos)                     /*!< SCB CCSIDR: RA Mask */
+
+#define SCB_CCSIDR_WA_Pos                  28U                                            /*!< SCB CCSIDR: WA Position */
+#define SCB_CCSIDR_WA_Msk                  (1UL << SCB_CCSIDR_WA_Pos)                     /*!< SCB CCSIDR: WA Mask */
+
+#define SCB_CCSIDR_NUMSETS_Pos             13U                                            /*!< SCB CCSIDR: NumSets Position */
+#define SCB_CCSIDR_NUMSETS_Msk             (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos)           /*!< SCB CCSIDR: NumSets Mask */
+
+#define SCB_CCSIDR_ASSOCIATIVITY_Pos        3U                                            /*!< SCB CCSIDR: Associativity Position */
+#define SCB_CCSIDR_ASSOCIATIVITY_Msk       (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos)      /*!< SCB CCSIDR: Associativity Mask */
+
+#define SCB_CCSIDR_LINESIZE_Pos             0U                                            /*!< SCB CCSIDR: LineSize Position */
+#define SCB_CCSIDR_LINESIZE_Msk            (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/)           /*!< SCB CCSIDR: LineSize Mask */
+
+/* SCB Cache Size Selection Register Definitions */
+#define SCB_CSSELR_LEVEL_Pos                1U                                            /*!< SCB CSSELR: Level Position */
+#define SCB_CSSELR_LEVEL_Msk               (7UL << SCB_CSSELR_LEVEL_Pos)                  /*!< SCB CSSELR: Level Mask */
+
+#define SCB_CSSELR_IND_Pos                  0U                                            /*!< SCB CSSELR: InD Position */
+#define SCB_CSSELR_IND_Msk                 (1UL /*<< SCB_CSSELR_IND_Pos*/)                /*!< SCB CSSELR: InD Mask */
+
+/* SCB Software Triggered Interrupt Register Definitions */
+#define SCB_STIR_INTID_Pos                  0U                                            /*!< SCB STIR: INTID Position */
+#define SCB_STIR_INTID_Msk                 (0x1FFUL /*<< SCB_STIR_INTID_Pos*/)            /*!< SCB STIR: INTID Mask */
+
+/* SCB D-Cache Invalidate by Set-way Register Definitions */
+#define SCB_DCISW_WAY_Pos                  30U                                            /*!< SCB DCISW: Way Position */
+#define SCB_DCISW_WAY_Msk                  (3UL << SCB_DCISW_WAY_Pos)                     /*!< SCB DCISW: Way Mask */
+
+#define SCB_DCISW_SET_Pos                   5U                                            /*!< SCB DCISW: Set Position */
+#define SCB_DCISW_SET_Msk                  (0x1FFUL << SCB_DCISW_SET_Pos)                 /*!< SCB DCISW: Set Mask */
+
+/* SCB D-Cache Clean by Set-way Register Definitions */
+#define SCB_DCCSW_WAY_Pos                  30U                                            /*!< SCB DCCSW: Way Position */
+#define SCB_DCCSW_WAY_Msk                  (3UL << SCB_DCCSW_WAY_Pos)                     /*!< SCB DCCSW: Way Mask */
+
+#define SCB_DCCSW_SET_Pos                   5U                                            /*!< SCB DCCSW: Set Position */
+#define SCB_DCCSW_SET_Msk                  (0x1FFUL << SCB_DCCSW_SET_Pos)                 /*!< SCB DCCSW: Set Mask */
+
+/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */
+#define SCB_DCCISW_WAY_Pos                 30U                                            /*!< SCB DCCISW: Way Position */
+#define SCB_DCCISW_WAY_Msk                 (3UL << SCB_DCCISW_WAY_Pos)                    /*!< SCB DCCISW: Way Mask */
+
+#define SCB_DCCISW_SET_Pos                  5U                                            /*!< SCB DCCISW: Set Position */
+#define SCB_DCCISW_SET_Msk                 (0x1FFUL << SCB_DCCISW_SET_Pos)                /*!< SCB DCCISW: Set Mask */
+
+/* Instruction Tightly-Coupled Memory Control Register Definitions */
+#define SCB_ITCMCR_SZ_Pos                   3U                                            /*!< SCB ITCMCR: SZ Position */
+#define SCB_ITCMCR_SZ_Msk                  (0xFUL << SCB_ITCMCR_SZ_Pos)                   /*!< SCB ITCMCR: SZ Mask */
+
+#define SCB_ITCMCR_RETEN_Pos                2U                                            /*!< SCB ITCMCR: RETEN Position */
+#define SCB_ITCMCR_RETEN_Msk               (1UL << SCB_ITCMCR_RETEN_Pos)                  /*!< SCB ITCMCR: RETEN Mask */
+
+#define SCB_ITCMCR_RMW_Pos                  1U                                            /*!< SCB ITCMCR: RMW Position */
+#define SCB_ITCMCR_RMW_Msk                 (1UL << SCB_ITCMCR_RMW_Pos)                    /*!< SCB ITCMCR: RMW Mask */
+
+#define SCB_ITCMCR_EN_Pos                   0U                                            /*!< SCB ITCMCR: EN Position */
+#define SCB_ITCMCR_EN_Msk                  (1UL /*<< SCB_ITCMCR_EN_Pos*/)                 /*!< SCB ITCMCR: EN Mask */
+
+/* Data Tightly-Coupled Memory Control Register Definitions */
+#define SCB_DTCMCR_SZ_Pos                   3U                                            /*!< SCB DTCMCR: SZ Position */
+#define SCB_DTCMCR_SZ_Msk                  (0xFUL << SCB_DTCMCR_SZ_Pos)                   /*!< SCB DTCMCR: SZ Mask */
+
+#define SCB_DTCMCR_RETEN_Pos                2U                                            /*!< SCB DTCMCR: RETEN Position */
+#define SCB_DTCMCR_RETEN_Msk               (1UL << SCB_DTCMCR_RETEN_Pos)                   /*!< SCB DTCMCR: RETEN Mask */
+
+#define SCB_DTCMCR_RMW_Pos                  1U                                            /*!< SCB DTCMCR: RMW Position */
+#define SCB_DTCMCR_RMW_Msk                 (1UL << SCB_DTCMCR_RMW_Pos)                    /*!< SCB DTCMCR: RMW Mask */
+
+#define SCB_DTCMCR_EN_Pos                   0U                                            /*!< SCB DTCMCR: EN Position */
+#define SCB_DTCMCR_EN_Msk                  (1UL /*<< SCB_DTCMCR_EN_Pos*/)                 /*!< SCB DTCMCR: EN Mask */
+
+/* AHBP Control Register Definitions */
+#define SCB_AHBPCR_SZ_Pos                   1U                                            /*!< SCB AHBPCR: SZ Position */
+#define SCB_AHBPCR_SZ_Msk                  (7UL << SCB_AHBPCR_SZ_Pos)                     /*!< SCB AHBPCR: SZ Mask */
+
+#define SCB_AHBPCR_EN_Pos                   0U                                            /*!< SCB AHBPCR: EN Position */
+#define SCB_AHBPCR_EN_Msk                  (1UL /*<< SCB_AHBPCR_EN_Pos*/)                 /*!< SCB AHBPCR: EN Mask */
+
+/* L1 Cache Control Register Definitions */
+#define SCB_CACR_FORCEWT_Pos                2U                                            /*!< SCB CACR: FORCEWT Position */
+#define SCB_CACR_FORCEWT_Msk               (1UL << SCB_CACR_FORCEWT_Pos)                  /*!< SCB CACR: FORCEWT Mask */
+
+#define SCB_CACR_ECCEN_Pos                  1U                                            /*!< SCB CACR: ECCEN Position */
+#define SCB_CACR_ECCEN_Msk                 (1UL << SCB_CACR_ECCEN_Pos)                    /*!< SCB CACR: ECCEN Mask */
+
+#define SCB_CACR_SIWT_Pos                   0U                                            /*!< SCB CACR: SIWT Position */
+#define SCB_CACR_SIWT_Msk                  (1UL /*<< SCB_CACR_SIWT_Pos*/)                 /*!< SCB CACR: SIWT Mask */
+
+/* AHBS Control Register Definitions */
+#define SCB_AHBSCR_INITCOUNT_Pos           11U                                            /*!< SCB AHBSCR: INITCOUNT Position */
+#define SCB_AHBSCR_INITCOUNT_Msk           (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos)           /*!< SCB AHBSCR: INITCOUNT Mask */
+
+#define SCB_AHBSCR_TPRI_Pos                 2U                                            /*!< SCB AHBSCR: TPRI Position */
+#define SCB_AHBSCR_TPRI_Msk                (0x1FFUL << SCB_AHBPCR_TPRI_Pos)               /*!< SCB AHBSCR: TPRI Mask */
+
+#define SCB_AHBSCR_CTL_Pos                  0U                                            /*!< SCB AHBSCR: CTL Position*/
+#define SCB_AHBSCR_CTL_Msk                 (3UL /*<< SCB_AHBPCR_CTL_Pos*/)                /*!< SCB AHBSCR: CTL Mask */
+
+/* Auxiliary Bus Fault Status Register Definitions */
+#define SCB_ABFSR_AXIMTYPE_Pos              8U                                            /*!< SCB ABFSR: AXIMTYPE Position*/
+#define SCB_ABFSR_AXIMTYPE_Msk             (3UL << SCB_ABFSR_AXIMTYPE_Pos)                /*!< SCB ABFSR: AXIMTYPE Mask */
+
+#define SCB_ABFSR_EPPB_Pos                  4U                                            /*!< SCB ABFSR: EPPB Position*/
+#define SCB_ABFSR_EPPB_Msk                 (1UL << SCB_ABFSR_EPPB_Pos)                    /*!< SCB ABFSR: EPPB Mask */
+
+#define SCB_ABFSR_AXIM_Pos                  3U                                            /*!< SCB ABFSR: AXIM Position*/
+#define SCB_ABFSR_AXIM_Msk                 (1UL << SCB_ABFSR_AXIM_Pos)                    /*!< SCB ABFSR: AXIM Mask */
+
+#define SCB_ABFSR_AHBP_Pos                  2U                                            /*!< SCB ABFSR: AHBP Position*/
+#define SCB_ABFSR_AHBP_Msk                 (1UL << SCB_ABFSR_AHBP_Pos)                    /*!< SCB ABFSR: AHBP Mask */
+
+#define SCB_ABFSR_DTCM_Pos                  1U                                            /*!< SCB ABFSR: DTCM Position*/
+#define SCB_ABFSR_DTCM_Msk                 (1UL << SCB_ABFSR_DTCM_Pos)                    /*!< SCB ABFSR: DTCM Mask */
+
+#define SCB_ABFSR_ITCM_Pos                  0U                                            /*!< SCB ABFSR: ITCM Position*/
+#define SCB_ABFSR_ITCM_Msk                 (1UL /*<< SCB_ABFSR_ITCM_Pos*/)                /*!< SCB ABFSR: ITCM Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IM  uint32_t ICTR;                   /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register */
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+  __IOM uint32_t CPPWR;                  /*!< Offset: 0x00C (R/W)  Coprocessor Power Control  Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0U                                         /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+  \brief    Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __OM  union
+  {
+    __OM  uint8_t    u8;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit */
+    __OM  uint16_t   u16;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit */
+    __OM  uint32_t   u32;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit */
+  }  PORT [32U];                         /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers */
+        uint32_t RESERVED0[864U];
+  __IOM uint32_t TER;                    /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register */
+        uint32_t RESERVED1[15U];
+  __IOM uint32_t TPR;                    /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register */
+        uint32_t RESERVED2[15U];
+  __IOM uint32_t TCR;                    /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register */
+        uint32_t RESERVED3[29U];
+  __OM  uint32_t IWR;                    /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register */
+  __IM  uint32_t IRR;                    /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register */
+  __IOM uint32_t IMCR;                   /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register */
+        uint32_t RESERVED4[43U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register */
+        uint32_t RESERVED5[1U];
+  __IM  uint32_t DEVARCH;                /*!< Offset: 0xFBC (R/ )  ITM Device Architecture Register */
+        uint32_t RESERVED6[4U];
+  __IM  uint32_t PID4;                   /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __IM  uint32_t PID5;                   /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __IM  uint32_t PID6;                   /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __IM  uint32_t PID7;                   /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __IM  uint32_t PID0;                   /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __IM  uint32_t PID1;                   /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __IM  uint32_t PID2;                   /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __IM  uint32_t PID3;                   /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __IM  uint32_t CID0;                   /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __IM  uint32_t CID1;                   /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __IM  uint32_t CID2;                   /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __IM  uint32_t CID3;                   /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Stimulus Port Register Definitions */
+#define ITM_STIM_DISABLED_Pos               1U                                            /*!< ITM STIM: DISABLED Position */
+#define ITM_STIM_DISABLED_Msk              (0x1UL << ITM_STIM_DISABLED_Pos)               /*!< ITM STIM: DISABLED Mask */
+
+#define ITM_STIM_FIFOREADY_Pos              0U                                            /*!< ITM STIM: FIFOREADY Position */
+#define ITM_STIM_FIFOREADY_Msk             (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/)          /*!< ITM STIM: FIFOREADY Mask */
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0U                                            /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/)            /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23U                                            /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TRACEBUSID_Pos             16U                                            /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TRACEBUSID_Msk             (0x7FUL << ITM_TCR_TRACEBUSID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10U                                            /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPRESCALE_Pos              8U                                            /*!< ITM TCR: TSPRESCALE Position */
+#define ITM_TCR_TSPRESCALE_Msk             (3UL << ITM_TCR_TSPRESCALE_Pos)                /*!< ITM TCR: TSPRESCALE Mask */
+
+#define ITM_TCR_STALLENA_Pos                5U                                            /*!< ITM TCR: STALLENA Position */
+#define ITM_TCR_STALLENA_Msk               (1UL << ITM_TCR_STALLENA_Pos)                  /*!< ITM TCR: STALLENA Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4U                                            /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3U                                            /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2U                                            /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1U                                            /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0U                                            /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0U                                            /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0U                                            /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0U                                            /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2U                                            /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1U                                            /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0U                                            /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+  __IOM uint32_t CYCCNT;                 /*!< Offset: 0x004 (R/W)  Cycle Count Register */
+  __IOM uint32_t CPICNT;                 /*!< Offset: 0x008 (R/W)  CPI Count Register */
+  __IOM uint32_t EXCCNT;                 /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register */
+  __IOM uint32_t SLEEPCNT;               /*!< Offset: 0x010 (R/W)  Sleep Count Register */
+  __IOM uint32_t LSUCNT;                 /*!< Offset: 0x014 (R/W)  LSU Count Register */
+  __IOM uint32_t FOLDCNT;                /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register */
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+        uint32_t RESERVED3[1U];
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+        uint32_t RESERVED5[1U];
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED6[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+        uint32_t RESERVED7[1U];
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+        uint32_t RESERVED8[1U];
+  __IOM uint32_t COMP4;                  /*!< Offset: 0x060 (R/W)  Comparator Register 4 */
+        uint32_t RESERVED9[1U];
+  __IOM uint32_t FUNCTION4;              /*!< Offset: 0x068 (R/W)  Function Register 4 */
+        uint32_t RESERVED10[1U];
+  __IOM uint32_t COMP5;                  /*!< Offset: 0x070 (R/W)  Comparator Register 5 */
+        uint32_t RESERVED11[1U];
+  __IOM uint32_t FUNCTION5;              /*!< Offset: 0x078 (R/W)  Function Register 5 */
+        uint32_t RESERVED12[1U];
+  __IOM uint32_t COMP6;                  /*!< Offset: 0x080 (R/W)  Comparator Register 6 */
+        uint32_t RESERVED13[1U];
+  __IOM uint32_t FUNCTION6;              /*!< Offset: 0x088 (R/W)  Function Register 6 */
+        uint32_t RESERVED14[1U];
+  __IOM uint32_t COMP7;                  /*!< Offset: 0x090 (R/W)  Comparator Register 7 */
+        uint32_t RESERVED15[1U];
+  __IOM uint32_t FUNCTION7;              /*!< Offset: 0x098 (R/W)  Function Register 7 */
+        uint32_t RESERVED16[1U];
+  __IOM uint32_t COMP8;                  /*!< Offset: 0x0A0 (R/W)  Comparator Register 8 */
+        uint32_t RESERVED17[1U];
+  __IOM uint32_t FUNCTION8;              /*!< Offset: 0x0A8 (R/W)  Function Register 8 */
+        uint32_t RESERVED18[1U];
+  __IOM uint32_t COMP9;                  /*!< Offset: 0x0B0 (R/W)  Comparator Register 9 */
+        uint32_t RESERVED19[1U];
+  __IOM uint32_t FUNCTION9;              /*!< Offset: 0x0B8 (R/W)  Function Register 9 */
+        uint32_t RESERVED20[1U];
+  __IOM uint32_t COMP10;                 /*!< Offset: 0x0C0 (R/W)  Comparator Register 10 */
+        uint32_t RESERVED21[1U];
+  __IOM uint32_t FUNCTION10;             /*!< Offset: 0x0C8 (R/W)  Function Register 10 */
+        uint32_t RESERVED22[1U];
+  __IOM uint32_t COMP11;                 /*!< Offset: 0x0D0 (R/W)  Comparator Register 11 */
+        uint32_t RESERVED23[1U];
+  __IOM uint32_t FUNCTION11;             /*!< Offset: 0x0D8 (R/W)  Function Register 11 */
+        uint32_t RESERVED24[1U];
+  __IOM uint32_t COMP12;                 /*!< Offset: 0x0E0 (R/W)  Comparator Register 12 */
+        uint32_t RESERVED25[1U];
+  __IOM uint32_t FUNCTION12;             /*!< Offset: 0x0E8 (R/W)  Function Register 12 */
+        uint32_t RESERVED26[1U];
+  __IOM uint32_t COMP13;                 /*!< Offset: 0x0F0 (R/W)  Comparator Register 13 */
+        uint32_t RESERVED27[1U];
+  __IOM uint32_t FUNCTION13;             /*!< Offset: 0x0F8 (R/W)  Function Register 13 */
+        uint32_t RESERVED28[1U];
+  __IOM uint32_t COMP14;                 /*!< Offset: 0x100 (R/W)  Comparator Register 14 */
+        uint32_t RESERVED29[1U];
+  __IOM uint32_t FUNCTION14;             /*!< Offset: 0x108 (R/W)  Function Register 14 */
+        uint32_t RESERVED30[1U];
+  __IOM uint32_t COMP15;                 /*!< Offset: 0x110 (R/W)  Comparator Register 15 */
+        uint32_t RESERVED31[1U];
+  __IOM uint32_t FUNCTION15;             /*!< Offset: 0x118 (R/W)  Function Register 15 */
+        uint32_t RESERVED32[934U];
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R  )  Lock Status Register */
+        uint32_t RESERVED33[1U];
+  __IM  uint32_t DEVARCH;                /*!< Offset: 0xFBC (R/ )  Device Architecture Register */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCDISS_Pos               23U                                         /*!< DWT CTRL: CYCDISS Position */
+#define DWT_CTRL_CYCDISS_Msk               (0x1UL << DWT_CTRL_CYCDISS_Pos)             /*!< DWT CTRL: CYCDISS Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22U                                         /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21U                                         /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20U                                         /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19U                                         /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18U                                         /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17U                                         /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16U                                         /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12U                                         /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10U                                         /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9U                                         /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5U                                         /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1U                                         /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0U                                         /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0U                                         /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0U                                         /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0U                                         /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0U                                         /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0U                                         /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_ID_Pos                27U                                         /*!< DWT FUNCTION: ID Position */
+#define DWT_FUNCTION_ID_Msk                (0x1FUL << DWT_FUNCTION_ID_Pos)             /*!< DWT FUNCTION: ID Mask */
+
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_ACTION_Pos             4U                                         /*!< DWT FUNCTION: ACTION Position */
+#define DWT_FUNCTION_ACTION_Msk            (0x1UL << DWT_FUNCTION_ACTION_Pos)          /*!< DWT FUNCTION: ACTION Mask */
+
+#define DWT_FUNCTION_MATCH_Pos              0U                                         /*!< DWT FUNCTION: MATCH Position */
+#define DWT_FUNCTION_MATCH_Msk             (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/)       /*!< DWT FUNCTION: MATCH Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Sizes Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Sizes Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IOM uint32_t PSCR;                   /*!< Offset: 0x308 (R/W)  Periodic Synchronization Control Register */
+        uint32_t RESERVED3[809U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  Software Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  Software Lock Status Register */
+        uint32_t RESERVED4[4U];
+  __IM  uint32_t TYPE;                   /*!< Offset: 0xFC8 (R/ )  Device Identifier Register */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  Device Type Register */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_SWOSCALER_Pos              0U                                         /*!< TPI ACPR: SWOSCALER Position */
+#define TPI_ACPR_SWOSCALER_Msk             (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/)    /*!< TPI ACPR: SWOSCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_FOnMan_Pos                 6U                                         /*!< TPI FFCR: FOnMan Position */
+#define TPI_FFCR_FOnMan_Msk                (0x1UL << TPI_FFCR_FOnMan_Pos)              /*!< TPI FFCR: FOnMan Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI Periodic Synchronization Control Register Definitions */
+#define TPI_PSCR_PSCount_Pos                0U                                         /*!< TPI PSCR: PSCount Position */
+#define TPI_PSCR_PSCount_Msk               (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/)        /*!< TPI PSCR: TPSCount Mask */
+
+/* TPI Software Lock Status Register Definitions */
+#define TPI_LSR_nTT_Pos                     1U                                         /*!< TPI LSR: Not thirty-two bit. Position */
+#define TPI_LSR_nTT_Msk                    (0x1UL << TPI_LSR_nTT_Pos)                  /*!< TPI LSR: Not thirty-two bit. Mask */
+
+#define TPI_LSR_SLK_Pos                     1U                                         /*!< TPI LSR: Software Lock status Position */
+#define TPI_LSR_SLK_Msk                    (0x1UL << TPI_LSR_SLK_Pos)                  /*!< TPI LSR: Software Lock status Mask */
+
+#define TPI_LSR_SLI_Pos                     0U                                         /*!< TPI LSR: Software Lock implemented Position */
+#define TPI_LSR_SLI_Msk                    (0x1UL /*<< TPI_LSR_SLI_Pos*/)              /*!< TPI LSR: Software Lock implemented Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_FIFOSZ_Pos                6U                                         /*!< TPI DEVID: FIFO depth Position */
+#define TPI_DEVID_FIFOSZ_Msk               (0x7UL << TPI_DEVID_FIFOSZ_Pos)             /*!< TPI DEVID: FIFO depth Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  MPU Region Limit Address Register */
+  __IOM uint32_t RBAR_A1;                /*!< Offset: 0x014 (R/W)  MPU Region Base Address Register Alias 1 */
+  __IOM uint32_t RLAR_A1;                /*!< Offset: 0x018 (R/W)  MPU Region Limit Address Register Alias 1 */
+  __IOM uint32_t RBAR_A2;                /*!< Offset: 0x01C (R/W)  MPU Region Base Address Register Alias 2 */
+  __IOM uint32_t RLAR_A2;                /*!< Offset: 0x020 (R/W)  MPU Region Limit Address Register Alias 2 */
+  __IOM uint32_t RBAR_A3;                /*!< Offset: 0x024 (R/W)  MPU Region Base Address Register Alias 3 */
+  __IOM uint32_t RLAR_A3;                /*!< Offset: 0x028 (R/W)  MPU Region Limit Address Register Alias 3 */
+        uint32_t RESERVED0[1];
+  union {
+  __IOM uint32_t MAIR[2];
+  struct {
+  __IOM uint32_t MAIR0;                  /*!< Offset: 0x030 (R/W)  MPU Memory Attribute Indirection Register 0 */
+  __IOM uint32_t MAIR1;                  /*!< Offset: 0x034 (R/W)  MPU Memory Attribute Indirection Register 1 */
+  };
+  };
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  4U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_BASE_Pos                   5U                                            /*!< MPU RBAR: BASE Position */
+#define MPU_RBAR_BASE_Msk                  (0x7FFFFFFUL << MPU_RBAR_BASE_Pos)             /*!< MPU RBAR: BASE Mask */
+
+#define MPU_RBAR_SH_Pos                     3U                                            /*!< MPU RBAR: SH Position */
+#define MPU_RBAR_SH_Msk                    (0x3UL << MPU_RBAR_SH_Pos)                     /*!< MPU RBAR: SH Mask */
+
+#define MPU_RBAR_AP_Pos                     1U                                            /*!< MPU RBAR: AP Position */
+#define MPU_RBAR_AP_Msk                    (0x3UL << MPU_RBAR_AP_Pos)                     /*!< MPU RBAR: AP Mask */
+
+#define MPU_RBAR_XN_Pos                     0U                                            /*!< MPU RBAR: XN Position */
+#define MPU_RBAR_XN_Msk                    (01UL /*<< MPU_RBAR_XN_Pos*/)                  /*!< MPU RBAR: XN Mask */
+
+/* MPU Region Limit Address Register Definitions */
+#define MPU_RLAR_LIMIT_Pos                  5U                                            /*!< MPU RLAR: LIMIT Position */
+#define MPU_RLAR_LIMIT_Msk                 (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos)            /*!< MPU RLAR: LIMIT Mask */
+
+#define MPU_RLAR_AttrIndx_Pos               1U                                            /*!< MPU RLAR: AttrIndx Position */
+#define MPU_RLAR_AttrIndx_Msk              (0x7UL << MPU_RLAR_AttrIndx_Pos)               /*!< MPU RLAR: AttrIndx Mask */
+
+#define MPU_RLAR_EN_Pos                     0U                                            /*!< MPU RLAR: Region enable bit Position */
+#define MPU_RLAR_EN_Msk                    (1UL /*<< MPU_RLAR_EN_Pos*/)                   /*!< MPU RLAR: Region enable bit Disable Mask */
+
+/* MPU Memory Attribute Indirection Register 0 Definitions */
+#define MPU_MAIR0_Attr3_Pos                24U                                            /*!< MPU MAIR0: Attr3 Position */
+#define MPU_MAIR0_Attr3_Msk                (0xFFUL << MPU_MAIR0_Attr3_Pos)                /*!< MPU MAIR0: Attr3 Mask */
+
+#define MPU_MAIR0_Attr2_Pos                16U                                            /*!< MPU MAIR0: Attr2 Position */
+#define MPU_MAIR0_Attr2_Msk                (0xFFUL << MPU_MAIR0_Attr2_Pos)                /*!< MPU MAIR0: Attr2 Mask */
+
+#define MPU_MAIR0_Attr1_Pos                 8U                                            /*!< MPU MAIR0: Attr1 Position */
+#define MPU_MAIR0_Attr1_Msk                (0xFFUL << MPU_MAIR0_Attr1_Pos)                /*!< MPU MAIR0: Attr1 Mask */
+
+#define MPU_MAIR0_Attr0_Pos                 0U                                            /*!< MPU MAIR0: Attr0 Position */
+#define MPU_MAIR0_Attr0_Msk                (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/)            /*!< MPU MAIR0: Attr0 Mask */
+
+/* MPU Memory Attribute Indirection Register 1 Definitions */
+#define MPU_MAIR1_Attr7_Pos                24U                                            /*!< MPU MAIR1: Attr7 Position */
+#define MPU_MAIR1_Attr7_Msk                (0xFFUL << MPU_MAIR1_Attr7_Pos)                /*!< MPU MAIR1: Attr7 Mask */
+
+#define MPU_MAIR1_Attr6_Pos                16U                                            /*!< MPU MAIR1: Attr6 Position */
+#define MPU_MAIR1_Attr6_Msk                (0xFFUL << MPU_MAIR1_Attr6_Pos)                /*!< MPU MAIR1: Attr6 Mask */
+
+#define MPU_MAIR1_Attr5_Pos                 8U                                            /*!< MPU MAIR1: Attr5 Position */
+#define MPU_MAIR1_Attr5_Msk                (0xFFUL << MPU_MAIR1_Attr5_Pos)                /*!< MPU MAIR1: Attr5 Mask */
+
+#define MPU_MAIR1_Attr4_Pos                 0U                                            /*!< MPU MAIR1: Attr4 Position */
+#define MPU_MAIR1_Attr4_Msk                (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/)            /*!< MPU MAIR1: Attr4 Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SAU     Security Attribution Unit (SAU)
+  \brief    Type definitions for the Security Attribution Unit (SAU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Security Attribution Unit (SAU).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SAU Control Register */
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x004 (R/ )  SAU Type Register */
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  SAU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  SAU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  SAU Region Limit Address Register */
+#else
+        uint32_t RESERVED0[3];
+#endif
+  __IOM uint32_t SFSR;                   /*!< Offset: 0x014 (R/W)  Secure Fault Status Register */
+  __IOM uint32_t SFAR;                   /*!< Offset: 0x018 (R/W)  Secure Fault Address Register */
+} SAU_Type;
+
+/* SAU Control Register Definitions */
+#define SAU_CTRL_ALLNS_Pos                  1U                                            /*!< SAU CTRL: ALLNS Position */
+#define SAU_CTRL_ALLNS_Msk                 (1UL << SAU_CTRL_ALLNS_Pos)                    /*!< SAU CTRL: ALLNS Mask */
+
+#define SAU_CTRL_ENABLE_Pos                 0U                                            /*!< SAU CTRL: ENABLE Position */
+#define SAU_CTRL_ENABLE_Msk                (1UL /*<< SAU_CTRL_ENABLE_Pos*/)               /*!< SAU CTRL: ENABLE Mask */
+
+/* SAU Type Register Definitions */
+#define SAU_TYPE_SREGION_Pos                0U                                            /*!< SAU TYPE: SREGION Position */
+#define SAU_TYPE_SREGION_Msk               (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/)           /*!< SAU TYPE: SREGION Mask */
+
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+/* SAU Region Number Register Definitions */
+#define SAU_RNR_REGION_Pos                  0U                                            /*!< SAU RNR: REGION Position */
+#define SAU_RNR_REGION_Msk                 (0xFFUL /*<< SAU_RNR_REGION_Pos*/)             /*!< SAU RNR: REGION Mask */
+
+/* SAU Region Base Address Register Definitions */
+#define SAU_RBAR_BADDR_Pos                  5U                                            /*!< SAU RBAR: BADDR Position */
+#define SAU_RBAR_BADDR_Msk                 (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos)            /*!< SAU RBAR: BADDR Mask */
+
+/* SAU Region Limit Address Register Definitions */
+#define SAU_RLAR_LADDR_Pos                  5U                                            /*!< SAU RLAR: LADDR Position */
+#define SAU_RLAR_LADDR_Msk                 (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos)            /*!< SAU RLAR: LADDR Mask */
+
+#define SAU_RLAR_NSC_Pos                    1U                                            /*!< SAU RLAR: NSC Position */
+#define SAU_RLAR_NSC_Msk                   (1UL << SAU_RLAR_NSC_Pos)                      /*!< SAU RLAR: NSC Mask */
+
+#define SAU_RLAR_ENABLE_Pos                 0U                                            /*!< SAU RLAR: ENABLE Position */
+#define SAU_RLAR_ENABLE_Msk                (1UL /*<< SAU_RLAR_ENABLE_Pos*/)               /*!< SAU RLAR: ENABLE Mask */
+
+#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */
+
+/* Secure Fault Status Register Definitions */
+#define SAU_SFSR_LSERR_Pos                  7U                                            /*!< SAU SFSR: LSERR Position */
+#define SAU_SFSR_LSERR_Msk                 (1UL << SAU_SFSR_LSERR_Pos)                    /*!< SAU SFSR: LSERR Mask */
+
+#define SAU_SFSR_SFARVALID_Pos              6U                                            /*!< SAU SFSR: SFARVALID Position */
+#define SAU_SFSR_SFARVALID_Msk             (1UL << SAU_SFSR_SFARVALID_Pos)                /*!< SAU SFSR: SFARVALID Mask */
+
+#define SAU_SFSR_LSPERR_Pos                 5U                                            /*!< SAU SFSR: LSPERR Position */
+#define SAU_SFSR_LSPERR_Msk                (1UL << SAU_SFSR_LSPERR_Pos)                   /*!< SAU SFSR: LSPERR Mask */
+
+#define SAU_SFSR_INVTRAN_Pos                4U                                            /*!< SAU SFSR: INVTRAN Position */
+#define SAU_SFSR_INVTRAN_Msk               (1UL << SAU_SFSR_INVTRAN_Pos)                  /*!< SAU SFSR: INVTRAN Mask */
+
+#define SAU_SFSR_AUVIOL_Pos                 3U                                            /*!< SAU SFSR: AUVIOL Position */
+#define SAU_SFSR_AUVIOL_Msk                (1UL << SAU_SFSR_AUVIOL_Pos)                   /*!< SAU SFSR: AUVIOL Mask */
+
+#define SAU_SFSR_INVER_Pos                  2U                                            /*!< SAU SFSR: INVER Position */
+#define SAU_SFSR_INVER_Msk                 (1UL << SAU_SFSR_INVER_Pos)                    /*!< SAU SFSR: INVER Mask */
+
+#define SAU_SFSR_INVIS_Pos                  1U                                            /*!< SAU SFSR: INVIS Position */
+#define SAU_SFSR_INVIS_Msk                 (1UL << SAU_SFSR_INVIS_Pos)                    /*!< SAU SFSR: INVIS Mask */
+
+#define SAU_SFSR_INVEP_Pos                  0U                                            /*!< SAU SFSR: INVEP Position */
+#define SAU_SFSR_INVEP_Msk                 (1UL /*<< SAU_SFSR_INVEP_Pos*/)                /*!< SAU SFSR: INVEP Mask */
+
+/*@} end of group CMSIS_SAU */
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_FPU     Floating Point Unit (FPU)
+  \brief    Type definitions for the Floating Point Unit (FPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t FPCCR;                  /*!< Offset: 0x004 (R/W)  Floating-Point Context Control Register */
+  __IOM uint32_t FPCAR;                  /*!< Offset: 0x008 (R/W)  Floating-Point Context Address Register */
+  __IOM uint32_t FPDSCR;                 /*!< Offset: 0x00C (R/W)  Floating-Point Default Status Control Register */
+  __IM  uint32_t MVFR0;                  /*!< Offset: 0x010 (R/ )  Media and FP Feature Register 0 */
+  __IM  uint32_t MVFR1;                  /*!< Offset: 0x014 (R/ )  Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos                31U                                            /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk                (1UL << FPU_FPCCR_ASPEN_Pos)                   /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos                30U                                            /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk                (1UL << FPU_FPCCR_LSPEN_Pos)                   /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_LSPENS_Pos               29U                                            /*!< FPCCR: LSPENS Position */
+#define FPU_FPCCR_LSPENS_Msk               (1UL << FPU_FPCCR_LSPENS_Pos)                  /*!< FPCCR: LSPENS bit Mask */
+
+#define FPU_FPCCR_CLRONRET_Pos             28U                                            /*!< FPCCR: CLRONRET Position */
+#define FPU_FPCCR_CLRONRET_Msk             (1UL << FPU_FPCCR_CLRONRET_Pos)                /*!< FPCCR: CLRONRET bit Mask */
+
+#define FPU_FPCCR_CLRONRETS_Pos            27U                                            /*!< FPCCR: CLRONRETS Position */
+#define FPU_FPCCR_CLRONRETS_Msk            (1UL << FPU_FPCCR_CLRONRETS_Pos)               /*!< FPCCR: CLRONRETS bit Mask */
+
+#define FPU_FPCCR_TS_Pos                   26U                                            /*!< FPCCR: TS Position */
+#define FPU_FPCCR_TS_Msk                   (1UL << FPU_FPCCR_TS_Pos)                      /*!< FPCCR: TS bit Mask */
+
+#define FPU_FPCCR_UFRDY_Pos                10U                                            /*!< FPCCR: UFRDY Position */
+#define FPU_FPCCR_UFRDY_Msk                (1UL << FPU_FPCCR_UFRDY_Pos)                   /*!< FPCCR: UFRDY bit Mask */
+
+#define FPU_FPCCR_SPLIMVIOL_Pos             9U                                            /*!< FPCCR: SPLIMVIOL Position */
+#define FPU_FPCCR_SPLIMVIOL_Msk            (1UL << FPU_FPCCR_SPLIMVIOL_Pos)               /*!< FPCCR: SPLIMVIOL bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos                8U                                            /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk               (1UL << FPU_FPCCR_MONRDY_Pos)                  /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_SFRDY_Pos                 7U                                            /*!< FPCCR: SFRDY Position */
+#define FPU_FPCCR_SFRDY_Msk                (1UL << FPU_FPCCR_SFRDY_Pos)                   /*!< FPCCR: SFRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos                 6U                                            /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk                (1UL << FPU_FPCCR_BFRDY_Pos)                   /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos                 5U                                            /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk                (1UL << FPU_FPCCR_MMRDY_Pos)                   /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos                 4U                                            /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk                (1UL << FPU_FPCCR_HFRDY_Pos)                   /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos                3U                                            /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk               (1UL << FPU_FPCCR_THREAD_Pos)                  /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_S_Pos                     2U                                            /*!< FPCCR: Security status of the FP context bit Position */
+#define FPU_FPCCR_S_Msk                    (1UL << FPU_FPCCR_S_Pos)                       /*!< FPCCR: Security status of the FP context bit Mask */
+
+#define FPU_FPCCR_USER_Pos                  1U                                            /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk                 (1UL << FPU_FPCCR_USER_Pos)                    /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos                0U                                            /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk               (1UL /*<< FPU_FPCCR_LSPACT_Pos*/)              /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos               3U                                            /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk              (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos)        /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos                 26U                                            /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk                 (1UL << FPU_FPDSCR_AHP_Pos)                    /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos                  25U                                            /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk                  (1UL << FPU_FPDSCR_DN_Pos)                     /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos                  24U                                            /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk                  (1UL << FPU_FPDSCR_FZ_Pos)                     /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos               22U                                            /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk               (3UL << FPU_FPDSCR_RMode_Pos)                  /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos    28U                                            /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk    (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos)     /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos        24U                                            /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk        (0xFUL << FPU_MVFR0_Short_vectors_Pos)         /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos          20U                                            /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk          (0xFUL << FPU_MVFR0_Square_root_Pos)           /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos               16U                                            /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk               (0xFUL << FPU_MVFR0_Divide_Pos)                /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos    12U                                            /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk    (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos)     /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos      8U                                            /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk     (0xFUL << FPU_MVFR0_Double_precision_Pos)      /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos      4U                                            /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk     (0xFUL << FPU_MVFR0_Single_precision_Pos)      /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos      0U                                            /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk     (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/)  /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos         28U                                            /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk         (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos)          /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos              24U                                            /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk              (0xFUL << FPU_MVFR1_FP_HPFP_Pos)               /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos            4U                                            /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk           (0xFUL << FPU_MVFR1_D_NaN_mode_Pos)            /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos              0U                                            /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk             (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/)          /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t DAUTHCTRL;              /*!< Offset: 0x014 (R/W)  Debug Authentication Control Register */
+  __IOM uint32_t DSCSR;                  /*!< Offset: 0x018 (R/W)  Debug Security Control and Status Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESTART_ST_Pos   26U                                            /*!< CoreDebug DHCSR: S_RESTART_ST Position */
+#define CoreDebug_DHCSR_S_RESTART_ST_Msk   (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos)      /*!< CoreDebug DHCSR: S_RESTART_ST Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5U                                            /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos         24U                                            /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19U                                            /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18U                                            /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17U                                            /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16U                                            /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9U                                            /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8U                                            /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7U                                            /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6U                                            /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5U                                            /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4U                                            /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/* Debug Authentication Control Register Definitions */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos  3U                                            /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos)    /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */
+
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos  2U                                            /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos)    /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */
+
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos   1U                                            /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk  (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos)     /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */
+
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos   0U                                            /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk  (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */
+
+/* Debug Security Control and Status Register Definitions */
+#define CoreDebug_DSCSR_CDS_Pos            16U                                            /*!< CoreDebug DSCSR: CDS Position */
+#define CoreDebug_DSCSR_CDS_Msk            (1UL << CoreDebug_DSCSR_CDS_Pos)               /*!< CoreDebug DSCSR: CDS Mask */
+
+#define CoreDebug_DSCSR_SBRSEL_Pos          1U                                            /*!< CoreDebug DSCSR: SBRSEL Position */
+#define CoreDebug_DSCSR_SBRSEL_Msk         (1UL << CoreDebug_DSCSR_SBRSEL_Pos)            /*!< CoreDebug DSCSR: SBRSEL Mask */
+
+#define CoreDebug_DSCSR_SBRSELEN_Pos        0U                                            /*!< CoreDebug DSCSR: SBRSELEN Position */
+#define CoreDebug_DSCSR_SBRSELEN_Msk       (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/)      /*!< CoreDebug DSCSR: SBRSELEN Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+  #define SCS_BASE            (0xE000E000UL)                             /*!< System Control Space Base Address */
+  #define ITM_BASE            (0xE0000000UL)                             /*!< ITM Base Address */
+  #define DWT_BASE            (0xE0001000UL)                             /*!< DWT Base Address */
+  #define TPI_BASE            (0xE0040000UL)                             /*!< TPI Base Address */
+  #define CoreDebug_BASE      (0xE000EDF0UL)                             /*!< Core Debug Base Address */
+  #define SysTick_BASE        (SCS_BASE +  0x0010UL)                     /*!< SysTick Base Address */
+  #define NVIC_BASE           (SCS_BASE +  0x0100UL)                     /*!< NVIC Base Address */
+  #define SCB_BASE            (SCS_BASE +  0x0D00UL)                     /*!< System Control Block Base Address */
+
+  #define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE         ) /*!< System control Register not in SCB */
+  #define SCB                 ((SCB_Type       *)     SCB_BASE         ) /*!< SCB configuration struct */
+  #define SysTick             ((SysTick_Type   *)     SysTick_BASE     ) /*!< SysTick configuration struct */
+  #define NVIC                ((NVIC_Type      *)     NVIC_BASE        ) /*!< NVIC configuration struct */
+  #define ITM                 ((ITM_Type       *)     ITM_BASE         ) /*!< ITM configuration struct */
+  #define DWT                 ((DWT_Type       *)     DWT_BASE         ) /*!< DWT configuration struct */
+  #define TPI                 ((TPI_Type       *)     TPI_BASE         ) /*!< TPI configuration struct */
+  #define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE   ) /*!< Core Debug configuration struct */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE          (SCS_BASE +  0x0D90UL)                     /*!< Memory Protection Unit */
+    #define MPU               ((MPU_Type       *)     MPU_BASE         ) /*!< Memory Protection Unit */
+  #endif
+
+  #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+    #define SAU_BASE          (SCS_BASE +  0x0DD0UL)                     /*!< Security Attribution Unit */
+    #define SAU               ((SAU_Type       *)     SAU_BASE         ) /*!< Security Attribution Unit */
+  #endif
+
+  #define FPU_BASE            (SCS_BASE +  0x0F30UL)                     /*!< Floating Point Unit */
+  #define FPU                 ((FPU_Type       *)     FPU_BASE         ) /*!< Floating Point Unit */
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+  #define SCS_BASE_NS         (0xE002E000UL)                             /*!< System Control Space Base Address (non-secure address space) */
+  #define CoreDebug_BASE_NS   (0xE002EDF0UL)                             /*!< Core Debug Base Address           (non-secure address space) */
+  #define SysTick_BASE_NS     (SCS_BASE_NS +  0x0010UL)                  /*!< SysTick Base Address              (non-secure address space) */
+  #define NVIC_BASE_NS        (SCS_BASE_NS +  0x0100UL)                  /*!< NVIC Base Address                 (non-secure address space) */
+  #define SCB_BASE_NS         (SCS_BASE_NS +  0x0D00UL)                  /*!< System Control Block Base Address (non-secure address space) */
+
+  #define SCnSCB_NS           ((SCnSCB_Type    *)     SCS_BASE_NS      ) /*!< System control Register not in SCB(non-secure address space) */
+  #define SCB_NS              ((SCB_Type       *)     SCB_BASE_NS      ) /*!< SCB configuration struct          (non-secure address space) */
+  #define SysTick_NS          ((SysTick_Type   *)     SysTick_BASE_NS  ) /*!< SysTick configuration struct      (non-secure address space) */
+  #define NVIC_NS             ((NVIC_Type      *)     NVIC_BASE_NS     ) /*!< NVIC configuration struct         (non-secure address space) */
+  #define CoreDebug_NS        ((CoreDebug_Type *)     CoreDebug_BASE_NS) /*!< Core Debug configuration struct   (non-secure address space) */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE_NS       (SCS_BASE_NS +  0x0D90UL)                  /*!< Memory Protection Unit            (non-secure address space) */
+    #define MPU_NS            ((MPU_Type       *)     MPU_BASE_NS      ) /*!< Memory Protection Unit            (non-secure address space) */
+  #endif
+
+  #define FPU_BASE_NS         (SCS_BASE_NS +  0x0F30UL)                  /*!< Floating Point Unit               (non-secure address space) */
+  #define FPU_NS              ((FPU_Type       *)     FPU_BASE_NS      ) /*!< Floating Point Unit               (non-secure address space) */
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* Special LR values for Secure/Non-Secure call handling and exception handling                                               */
+
+/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS                   */
+#define FNC_RETURN                 (0xFEFFFFFFUL)     /* bit [0] ignored when processing a branch                             */
+
+/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */
+#define EXC_RETURN_PREFIX          (0xFF000000UL)     /* bits [31:24] set to indicate an EXC_RETURN value                     */
+#define EXC_RETURN_S               (0x00000040UL)     /* bit [6] stack used to push registers: 0=Non-secure 1=Secure          */
+#define EXC_RETURN_DCRS            (0x00000020UL)     /* bit [5] stacking rules for called registers: 0=skipped 1=saved       */
+#define EXC_RETURN_FTYPE           (0x00000010UL)     /* bit [4] allocate stack for floating-point context: 0=done 1=skipped  */
+#define EXC_RETURN_MODE            (0x00000008UL)     /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode      */
+#define EXC_RETURN_SPSEL           (0x00000002UL)     /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP           */
+#define EXC_RETURN_ES              (0x00000001UL)     /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */
+
+/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking                            */
+#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)  /* Value for processors with floating-point extension:                  */
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125AUL)     /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE                   */
+#else
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125BUL)     /* Value for processors without floating-point extension                */
+#endif
+
+
+/**
+  \brief   Set Priority Grouping
+  \details Sets the priority grouping field using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << 8U)                      );              /* Insert write key and priorty group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping
+  \details Reads the priority grouping field from the NVIC Interrupt Controller.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Get Interrupt Target State
+  \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+  \return             1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Target State
+  \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |=  ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Clear Interrupt Target State
+  \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IPR[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Set Priority Grouping (non-secure)
+  \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB_NS->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk));             /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << 8U)                      );              /* Insert write key and priorty group */
+  SCB_NS->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping (non-secure)
+  \details Reads the priority grouping field from the non-secure NVIC when in secure state.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void)
+{
+  return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt (non-secure)
+  \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status (non-secure)
+  \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt (non-secure)
+  \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt (non-secure)
+  \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt (non-secure)
+  \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt (non-secure)
+  \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt (non-secure)
+  \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority (non-secure)
+  \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every non-secure processor exception.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->IPR[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority (non-secure)
+  \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+#endif /*  defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv8.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+  uint32_t mvfr0;
+
+  mvfr0 = FPU->MVFR0;
+  if      ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U)
+  {
+    return 2U;           /* Double + Single precision FPU */
+  }
+  else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U)
+  {
+    return 1U;           /* Single precision FPU */
+  }
+  else
+  {
+    return 0U;           /* No FPU */
+  }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##########################   SAU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SAUFunctions SAU Functions
+  \brief    Functions that configure the SAU.
+  @{
+ */
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+
+/**
+  \brief   Enable SAU
+  \details Enables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Enable(void)
+{
+    SAU->CTRL |=  (SAU_CTRL_ENABLE_Msk);
+}
+
+
+
+/**
+  \brief   Disable SAU
+  \details Disables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Disable(void)
+{
+    SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk);
+}
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_SAUFunctions */
+
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   System Tick Configuration (non-secure)
+  \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>TZ_SysTick_Config_NS</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                         /* Reload value impossible */
+  }
+
+  SysTick_NS->LOAD  = (uint32_t)(ticks - 1UL);                            /* set reload register */
+  TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick_NS->VAL   = 0UL;                                                /* Load the SysTick Counter Value */
+  SysTick_NS->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                      SysTick_CTRL_TICKINT_Msk   |
+                      SysTick_CTRL_ENABLE_Msk;                            /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                           /* Function successful */
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_core_DebugFunctions ITM Functions
+  \brief    Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                              /*!< External variable to receive characters. */
+#define                 ITM_RXBUFFER_EMPTY  ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+  \brief   ITM Send Character
+  \details Transmits a character via the ITM channel 0, and
+           \li Just returns when no debugger is connected that has booked the output.
+           \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+  \param [in]     ch  Character to transmit.
+  \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0U].u32 == 0UL)
+    {
+      __NOP();
+    }
+    ITM->PORT[0U].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Receive Character
+  \details Inputs a character via the external variable \ref ITM_RxBuffer.
+  \return             Received character.
+  \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+  {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Check Character
+  \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+  \return          0  No character available.
+  \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+  {
+    return (0);                              /* no character available */
+  }
+  else
+  {
+    return (1);                              /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_ARMV8MML_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

Soft/STM32/Controle/Drivers/CMSIS/Include/core_cm0.h

@@ -1,40 +1,30 @@
 /**************************************************************************//**
  * @file     core_cm0.h
  * @brief    CMSIS Cortex-M0 Core Peripheral Access Layer Header File
- * @version  V4.30
- * @date     20. October 2015
+ * @version  V5.0.5
+ * @date     28. May 2018
  ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
-   All rights reserved.
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-   - Neither the name of ARM nor the names of its contributors may be used
-     to endorse or promote products derived from this software without
-     specific prior written permission.
-   *
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-   ---------------------------------------------------------------------------*/
-
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
 
 #if   defined ( __ICCARM__ )
- #pragma system_include         /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
   #pragma clang system_header   /* treat file as system include file */
 #endif
 
@@ -70,53 +60,15 @@
   @{
  */
 
+#include "cmsis_version.h"
+ 
 /*  CMSIS CM0 definitions */
-#define __CM0_CMSIS_VERSION_MAIN  (0x04U)                                      /*!< [31:16] CMSIS HAL main version */
-#define __CM0_CMSIS_VERSION_SUB   (0x1EU)                                      /*!< [15:0]  CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */
 #define __CM0_CMSIS_VERSION       ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
-                                    __CM0_CMSIS_VERSION_SUB           )        /*!< CMSIS HAL version number */
-
-#define __CORTEX_M                (0x00U)                                      /*!< Cortex-M Core */
-
-
-#if   defined ( __CC_ARM )
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-
-#elif defined ( __GNUC__ )
-  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __ICCARM__ )
-  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __TMS470__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __TASKING__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler */
-  #define __STATIC_INLINE  static inline
+                                    __CM0_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
 
-#elif defined ( __CSMC__ )
-  #define __packed
-  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler */
-  #define __INLINE         inline                                    /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
-  #define __STATIC_INLINE  static inline
-
-#else
-  #error Unknown compiler
-#endif
+#define __CORTEX_M                (0U)                                   /*!< Cortex-M Core */
 
 /** __FPU_USED indicates whether an FPU is used or not.
     This core does not support an FPU at all
@@ -128,7 +80,7 @@
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
 
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
   #if defined __ARM_PCS_VFP
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
@@ -143,7 +95,7 @@
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
 
-#elif defined ( __TMS470__ )
+#elif defined ( __TI_ARM__ )
   #if defined __TI_VFP_SUPPORT__
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
@@ -160,8 +112,8 @@
 
 #endif
 
-#include "core_cmInstr.h"                /* Core Instruction Access */
-#include "core_cmFunc.h"                 /* Core Function Access */
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
 
 #ifdef __cplusplus
 }
@@ -555,18 +507,18 @@ typedef struct
 /**
   \brief   Mask and shift a bit field value for use in a register bit range.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of the bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted value.
 */
-#define _VAL2FLD(field, value)    ((value << field ## _Pos) & field ## _Msk)
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
 
 /**
   \brief     Mask and shift a register value to extract a bit filed value.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of register.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted bit field value.
 */
-#define _FLD2VAL(field, value)    ((value & field ## _Msk) >> field ## _Pos)
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
 
 /*@} end of group CMSIS_core_bitfield */
 
@@ -578,7 +530,7 @@ typedef struct
   @{
  */
 
-/* Memory mapping of Cortex-M0 Hardware */
+/* Memory mapping of Core Hardware */
 #define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
 #define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
 #define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
@@ -614,87 +566,177 @@ typedef struct
   @{
  */
 
-/* Interrupt Priorities are WORD accessible only under ARMv6M                   */
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for Cortex-M0 */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
 /* The following MACROS handle generation of the register offset and byte masks */
 #define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
 #define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
 #define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
 
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
 
 /**
-  \brief   Enable External Interrupt
-  \details Enables a device-specific interrupt in the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
 {
-  NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
-  \brief   Disable External Interrupt
-  \details Disables a device-specific interrupt in the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
 {
-  NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
 }
 
 
 /**
   \brief   Get Pending Interrupt
-  \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
-  \param [in]      IRQn  Interrupt number.
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
   \return             0  Interrupt status is not pending.
   \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
 {
-  return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
 }
 
 
 /**
   \brief   Set Pending Interrupt
-  \details Sets the pending bit of an external interrupt.
-  \param [in]      IRQn  Interrupt number. Value cannot be negative.
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
 {
-  NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
   \brief   Clear Pending Interrupt
-  \details Clears the pending bit of an external interrupt.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
 {
-  NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
   \brief   Set Interrupt Priority
-  \details Sets the priority of an interrupt.
-  \note    The priority cannot be set for every core interrupt.
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
   \param [in]      IRQn  Interrupt number.
   \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
  */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
 {
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
   {
-    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
        (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
   }
   else
   {
-    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
        (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
   }
 }
@@ -702,32 +744,116 @@ __STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
 
 /**
   \brief   Get Interrupt Priority
-  \details Reads the priority of an interrupt.
-           The interrupt number can be positive to specify an external (device specific) interrupt,
-           or negative to specify an internal (core) interrupt.
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
   \param [in]   IRQn  Interrupt number.
   \return             Interrupt Priority.
                       Value is aligned automatically to the implemented priority bits of the microcontroller.
  */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
 {
 
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
   {
-    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
   }
   else
   {
-    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
   }
 }
 
 
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           Address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
 /**
   \brief   System Reset
   \details Initiates a system reset request to reset the MCU.
  */
-__STATIC_INLINE void NVIC_SystemReset(void)
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
 {
   __DSB();                                                          /* Ensure all outstanding memory accesses included
                                                                        buffered write are completed before reset */
@@ -744,6 +870,31 @@ __STATIC_INLINE void NVIC_SystemReset(void)
 /*@} end of CMSIS_Core_NVICFunctions */
 
 
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
 
 /* ##################################    SysTick function  ############################################ */
 /**
@@ -753,7 +904,7 @@ __STATIC_INLINE void NVIC_SystemReset(void)
   @{
  */
 
-#if (__Vendor_SysTickConfig == 0U)
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
 
 /**
   \brief   System Tick Configuration

Soft/STM32/Controle/Drivers/CMSIS/Include/core_cm0plus.h

@@ -1,40 +1,30 @@
 /**************************************************************************//**
  * @file     core_cm0plus.h
  * @brief    CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
- * @version  V4.30
- * @date     20. October 2015
+ * @version  V5.0.6
+ * @date     28. May 2018
  ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
-   All rights reserved.
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-   - Neither the name of ARM nor the names of its contributors may be used
-     to endorse or promote products derived from this software without
-     specific prior written permission.
-   *
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-   ---------------------------------------------------------------------------*/
-
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
 
 #if   defined ( __ICCARM__ )
- #pragma system_include         /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
   #pragma clang system_header   /* treat file as system include file */
 #endif
 
@@ -70,53 +60,15 @@
   @{
  */
 
+#include "cmsis_version.h"
+ 
 /*  CMSIS CM0+ definitions */
-#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04U)                                   /*!< [31:16] CMSIS HAL main version */
-#define __CM0PLUS_CMSIS_VERSION_SUB  (0x1EU)                                   /*!< [15:0]  CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN)                  /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB  (__CM_CMSIS_VERSION_SUB)                   /*!< \deprecated [15:0]  CMSIS HAL sub version */
 #define __CM0PLUS_CMSIS_VERSION      ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \
-                                       __CM0PLUS_CMSIS_VERSION_SUB           ) /*!< CMSIS HAL version number */
-
-#define __CORTEX_M                (0x00U)                                      /*!< Cortex-M Core */
-
-
-#if   defined ( __CC_ARM )
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-
-#elif defined ( __GNUC__ )
-  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __ICCARM__ )
-  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __TMS470__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __TASKING__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __CSMC__ )
-  #define __packed
-  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler */
-  #define __INLINE         inline                                    /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
-  #define __STATIC_INLINE  static inline
+                                       __CM0PLUS_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
 
-#else
-  #error Unknown compiler
-#endif
+#define __CORTEX_M                   (0U)                                       /*!< Cortex-M Core */
 
 /** __FPU_USED indicates whether an FPU is used or not.
     This core does not support an FPU at all
@@ -128,7 +80,7 @@
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
 
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
   #if defined __ARM_PCS_VFP
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
@@ -143,7 +95,7 @@
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
 
-#elif defined ( __TMS470__ )
+#elif defined ( __TI_ARM__ )
   #if defined __TI_VFP_SUPPORT__
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
@@ -160,8 +112,8 @@
 
 #endif
 
-#include "core_cmInstr.h"                /* Core Instruction Access */
-#include "core_cmFunc.h"                 /* Core Function Access */
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
 
 #ifdef __cplusplus
 }
@@ -404,7 +356,7 @@ typedef struct
 {
   __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
   __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
-#if (__VTOR_PRESENT == 1U)
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
   __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
 #else
         uint32_t RESERVED0;
@@ -461,7 +413,7 @@ typedef struct
 #define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
 #define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
 
-#if (__VTOR_PRESENT == 1U)
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
 /* SCB Interrupt Control State Register Definitions */
 #define SCB_VTOR_TBLOFF_Pos                 8U                                            /*!< SCB VTOR: TBLOFF Position */
 #define SCB_VTOR_TBLOFF_Msk                (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos)            /*!< SCB VTOR: TBLOFF Mask */
@@ -558,7 +510,7 @@ typedef struct
 
 /*@} end of group CMSIS_SysTick */
 
-#if (__MPU_PRESENT == 1U)
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
 /**
   \ingroup  CMSIS_core_register
   \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
@@ -578,6 +530,8 @@ typedef struct
   __IOM uint32_t RASR;                   /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register */
 } MPU_Type;
 
+#define MPU_TYPE_RALIASES                  1U
+
 /* MPU Type Register Definitions */
 #define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
 #define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
@@ -667,18 +621,18 @@ typedef struct
 /**
   \brief   Mask and shift a bit field value for use in a register bit range.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of the bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted value.
 */
-#define _VAL2FLD(field, value)    ((value << field ## _Pos) & field ## _Msk)
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
 
 /**
   \brief     Mask and shift a register value to extract a bit filed value.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of register.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted bit field value.
 */
-#define _FLD2VAL(field, value)    ((value & field ## _Msk) >> field ## _Pos)
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
 
 /*@} end of group CMSIS_core_bitfield */
 
@@ -690,7 +644,7 @@ typedef struct
   @{
  */
 
-/* Memory mapping of Cortex-M0+ Hardware */
+/* Memory mapping of Core Hardware */
 #define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
 #define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
 #define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
@@ -700,7 +654,7 @@ typedef struct
 #define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
 #define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
 
-#if (__MPU_PRESENT == 1U)
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
   #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
   #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
 #endif
@@ -730,87 +684,177 @@ typedef struct
   @{
  */
 
-/* Interrupt Priorities are WORD accessible only under ARMv6M                   */
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for Cortex-M0+ */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
 /* The following MACROS handle generation of the register offset and byte masks */
 #define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
 #define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
 #define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
 
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
 
 /**
-  \brief   Enable External Interrupt
-  \details Enables a device-specific interrupt in the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
 {
-  NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
 }
 
 
 /**
-  \brief   Disable External Interrupt
-  \details Disables a device-specific interrupt in the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
 {
-  NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
 }
 
 
 /**
   \brief   Get Pending Interrupt
-  \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
-  \param [in]      IRQn  Interrupt number.
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
   \return             0  Interrupt status is not pending.
   \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
 {
-  return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
 }
 
 
 /**
   \brief   Set Pending Interrupt
-  \details Sets the pending bit of an external interrupt.
-  \param [in]      IRQn  Interrupt number. Value cannot be negative.
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
 {
-  NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
   \brief   Clear Pending Interrupt
-  \details Clears the pending bit of an external interrupt.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
 {
-  NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
   \brief   Set Interrupt Priority
-  \details Sets the priority of an interrupt.
-  \note    The priority cannot be set for every core interrupt.
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
   \param [in]      IRQn  Interrupt number.
   \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
  */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
 {
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
   {
-    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
        (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
   }
   else
   {
-    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
        (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
   }
 }
@@ -818,32 +862,125 @@ __STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
 
 /**
   \brief   Get Interrupt Priority
-  \details Reads the priority of an interrupt.
-           The interrupt number can be positive to specify an external (device specific) interrupt,
-           or negative to specify an internal (core) interrupt.
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
   \param [in]   IRQn  Interrupt number.
   \return             Interrupt Priority.
                       Value is aligned automatically to the implemented priority bits of the microcontroller.
  */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
 {
 
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
   {
-    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
   }
   else
   {
-    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
   }
 }
 
 
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+           If VTOR is not present address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+#else
+    uint32_t *vectors = (uint32_t *)0x0U;
+#endif
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+#else
+  uint32_t *vectors = (uint32_t *)0x0U;
+#endif
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+
+}
+
+
 /**
   \brief   System Reset
   \details Initiates a system reset request to reset the MCU.
  */
-__STATIC_INLINE void NVIC_SystemReset(void)
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
 {
   __DSB();                                                          /* Ensure all outstanding memory accesses included
                                                                        buffered write are completed before reset */
@@ -859,6 +996,38 @@ __STATIC_INLINE void NVIC_SystemReset(void)
 
 /*@} end of CMSIS_Core_NVICFunctions */
 
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv7.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
 
 
 /* ##################################    SysTick function  ############################################ */
@@ -869,7 +1038,7 @@ __STATIC_INLINE void NVIC_SystemReset(void)
   @{
  */
 
-#if (__Vendor_SysTickConfig == 0U)
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
 
 /**
   \brief   System Tick Configuration

Soft/STM32/Controle/Drivers/CMSIS/Include/core_cm1.h

@@ -0,0 +1,976 @@
+/**************************************************************************//**
+ * @file     core_cm1.h
+ * @brief    CMSIS Cortex-M1 Core Peripheral Access Layer Header File
+ * @version  V1.0.0
+ * @date     23. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM1_H_GENERIC
+#define __CORE_CM1_H_GENERIC
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M1
+  @{
+ */
+
+#include "cmsis_version.h"
+ 
+/*  CMSIS CM1 definitions */
+#define __CM1_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM1_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM1_CMSIS_VERSION       ((__CM1_CMSIS_VERSION_MAIN << 16U) | \
+                                    __CM1_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                (1U)                                   /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM1_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM1_H_DEPENDANT
+#define __CORE_CM1_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM1_REV
+    #define __CM1_REV               0x0100U
+    #warning "__CM1_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M1 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:1;               /*!< bit:      0  Reserved */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[1U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[31U];
+  __IOM uint32_t ICER[1U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[31U];
+  __IOM uint32_t ISPR[1U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[31U];
+  __IOM uint32_t ICPR[1U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[31U];
+        uint32_t RESERVED4[64U];
+  __IOM uint32_t IP[8U];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+        uint32_t RESERVED0;
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHP[2U];                /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_ITCMUAEN_Pos            4U                                        /*!< ACTLR: Instruction TCM Upper Alias Enable Position */
+#define SCnSCB_ACTLR_ITCMUAEN_Msk           (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos)         /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */
+
+#define SCnSCB_ACTLR_ITCMLAEN_Pos            3U                                        /*!< ACTLR: Instruction TCM Lower Alias Enable Position */
+#define SCnSCB_ACTLR_ITCMLAEN_Msk           (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos)         /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+            Therefore they are not covered by the Cortex-M1 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for Cortex-M1 */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           Address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM1_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

Soft/STM32/Controle/Drivers/CMSIS/Include/core_cm23.h

@@ -0,0 +1,1993 @@
+/**************************************************************************//**
+ * @file     core_cm23.h
+ * @brief    CMSIS Cortex-M23 Core Peripheral Access Layer Header File
+ * @version  V5.0.7
+ * @date     22. June 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM23_H_GENERIC
+#define __CORE_CM23_H_GENERIC
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M23
+  @{
+ */
+
+#include "cmsis_version.h"
+
+/*  CMSIS definitions */
+#define __CM23_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                   /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM23_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)                    /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM23_CMSIS_VERSION       ((__CM23_CMSIS_VERSION_MAIN << 16U) | \
+                                     __CM23_CMSIS_VERSION_SUB           )      /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                 (23U)                                       /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM23_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM23_H_DEPENDANT
+#define __CORE_CM23_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM23_REV
+    #define __CM23_REV                0x0000U
+    #warning "__CM23_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             0U
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __SAUREGION_PRESENT
+    #define __SAUREGION_PRESENT       0U
+    #warning "__SAUREGION_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __VTOR_PRESENT
+    #define __VTOR_PRESENT            0U
+    #warning "__VTOR_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+
+  #ifndef __ETM_PRESENT
+    #define __ETM_PRESENT             0U
+    #warning "__ETM_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MTB_PRESENT
+    #define __MTB_PRESENT             0U
+    #warning "__MTB_PRESENT not defined in device header file; using default!"
+  #endif
+
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M23 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core SAU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack-pointer select */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[16U];              /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[16U];
+  __IOM uint32_t ICER[16U];              /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[16U];
+  __IOM uint32_t ISPR[16U];              /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[16U];
+  __IOM uint32_t ICPR[16U];              /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[16U];
+  __IOM uint32_t IABR[16U];              /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[16U];
+  __IOM uint32_t ITNS[16U];              /*!< Offset: 0x280 (R/W)  Interrupt Non-Secure State Register */
+        uint32_t RESERVED5[16U];
+  __IOM uint32_t IPR[124U];              /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+#else
+        uint32_t RESERVED0;
+#endif
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHPR[2U];               /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_PENDNMISET_Pos            31U                                            /*!< SCB ICSR: PENDNMISET Position */
+#define SCB_ICSR_PENDNMISET_Msk            (1UL << SCB_ICSR_PENDNMISET_Pos)               /*!< SCB ICSR: PENDNMISET Mask */
+
+#define SCB_ICSR_NMIPENDSET_Pos            SCB_ICSR_PENDNMISET_Pos                        /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */
+#define SCB_ICSR_NMIPENDSET_Msk            SCB_ICSR_PENDNMISET_Msk                        /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */
+
+#define SCB_ICSR_PENDNMICLR_Pos            30U                                            /*!< SCB ICSR: PENDNMICLR Position */
+#define SCB_ICSR_PENDNMICLR_Msk            (1UL << SCB_ICSR_PENDNMICLR_Pos)               /*!< SCB ICSR: PENDNMICLR Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_STTNS_Pos                 24U                                            /*!< SCB ICSR: STTNS Position (Security Extension) */
+#define SCB_ICSR_STTNS_Msk                 (1UL << SCB_ICSR_STTNS_Pos)                    /*!< SCB ICSR: STTNS Mask (Security Extension) */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIS_Pos                 14U                                            /*!< SCB AIRCR: PRIS Position */
+#define SCB_AIRCR_PRIS_Msk                 (1UL << SCB_AIRCR_PRIS_Pos)                    /*!< SCB AIRCR: PRIS Mask */
+
+#define SCB_AIRCR_BFHFNMINS_Pos            13U                                            /*!< SCB AIRCR: BFHFNMINS Position */
+#define SCB_AIRCR_BFHFNMINS_Msk            (1UL << SCB_AIRCR_BFHFNMINS_Pos)               /*!< SCB AIRCR: BFHFNMINS Mask */
+
+#define SCB_AIRCR_SYSRESETREQS_Pos          3U                                            /*!< SCB AIRCR: SYSRESETREQS Position */
+#define SCB_AIRCR_SYSRESETREQS_Msk         (1UL << SCB_AIRCR_SYSRESETREQS_Pos)            /*!< SCB AIRCR: SYSRESETREQS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEPS_Pos              3U                                            /*!< SCB SCR: SLEEPDEEPS Position */
+#define SCB_SCR_SLEEPDEEPS_Msk             (1UL << SCB_SCR_SLEEPDEEPS_Pos)                /*!< SCB SCR: SLEEPDEEPS Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos                     18U                                            /*!< SCB CCR: BP Position */
+#define SCB_CCR_BP_Msk                     (1UL << SCB_CCR_BP_Pos)                        /*!< SCB CCR: BP Mask */
+
+#define SCB_CCR_IC_Pos                     17U                                            /*!< SCB CCR: IC Position */
+#define SCB_CCR_IC_Msk                     (1UL << SCB_CCR_IC_Pos)                        /*!< SCB CCR: IC Mask */
+
+#define SCB_CCR_DC_Pos                     16U                                            /*!< SCB CCR: DC Position */
+#define SCB_CCR_DC_Msk                     (1UL << SCB_CCR_DC_Pos)                        /*!< SCB CCR: DC Mask */
+
+#define SCB_CCR_STKOFHFNMIGN_Pos           10U                                            /*!< SCB CCR: STKOFHFNMIGN Position */
+#define SCB_CCR_STKOFHFNMIGN_Msk           (1UL << SCB_CCR_STKOFHFNMIGN_Pos)              /*!< SCB CCR: STKOFHFNMIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_HARDFAULTPENDED_Pos      21U                                            /*!< SCB SHCSR: HARDFAULTPENDED Position */
+#define SCB_SHCSR_HARDFAULTPENDED_Msk      (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos)         /*!< SCB SHCSR: HARDFAULTPENDED Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_NMIACT_Pos                5U                                            /*!< SCB SHCSR: NMIACT Position */
+#define SCB_SHCSR_NMIACT_Msk               (1UL << SCB_SHCSR_NMIACT_Pos)                  /*!< SCB SHCSR: NMIACT Mask */
+
+#define SCB_SHCSR_HARDFAULTACT_Pos          2U                                            /*!< SCB SHCSR: HARDFAULTACT Position */
+#define SCB_SHCSR_HARDFAULTACT_Msk         (1UL << SCB_SHCSR_HARDFAULTACT_Pos)            /*!< SCB SHCSR: HARDFAULTACT Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+        uint32_t RESERVED0[6U];
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+        uint32_t RESERVED3[1U];
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+        uint32_t RESERVED5[1U];
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED6[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+        uint32_t RESERVED7[1U];
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+        uint32_t RESERVED8[1U];
+  __IOM uint32_t COMP4;                  /*!< Offset: 0x060 (R/W)  Comparator Register 4 */
+        uint32_t RESERVED9[1U];
+  __IOM uint32_t FUNCTION4;              /*!< Offset: 0x068 (R/W)  Function Register 4 */
+        uint32_t RESERVED10[1U];
+  __IOM uint32_t COMP5;                  /*!< Offset: 0x070 (R/W)  Comparator Register 5 */
+        uint32_t RESERVED11[1U];
+  __IOM uint32_t FUNCTION5;              /*!< Offset: 0x078 (R/W)  Function Register 5 */
+        uint32_t RESERVED12[1U];
+  __IOM uint32_t COMP6;                  /*!< Offset: 0x080 (R/W)  Comparator Register 6 */
+        uint32_t RESERVED13[1U];
+  __IOM uint32_t FUNCTION6;              /*!< Offset: 0x088 (R/W)  Function Register 6 */
+        uint32_t RESERVED14[1U];
+  __IOM uint32_t COMP7;                  /*!< Offset: 0x090 (R/W)  Comparator Register 7 */
+        uint32_t RESERVED15[1U];
+  __IOM uint32_t FUNCTION7;              /*!< Offset: 0x098 (R/W)  Function Register 7 */
+        uint32_t RESERVED16[1U];
+  __IOM uint32_t COMP8;                  /*!< Offset: 0x0A0 (R/W)  Comparator Register 8 */
+        uint32_t RESERVED17[1U];
+  __IOM uint32_t FUNCTION8;              /*!< Offset: 0x0A8 (R/W)  Function Register 8 */
+        uint32_t RESERVED18[1U];
+  __IOM uint32_t COMP9;                  /*!< Offset: 0x0B0 (R/W)  Comparator Register 9 */
+        uint32_t RESERVED19[1U];
+  __IOM uint32_t FUNCTION9;              /*!< Offset: 0x0B8 (R/W)  Function Register 9 */
+        uint32_t RESERVED20[1U];
+  __IOM uint32_t COMP10;                 /*!< Offset: 0x0C0 (R/W)  Comparator Register 10 */
+        uint32_t RESERVED21[1U];
+  __IOM uint32_t FUNCTION10;             /*!< Offset: 0x0C8 (R/W)  Function Register 10 */
+        uint32_t RESERVED22[1U];
+  __IOM uint32_t COMP11;                 /*!< Offset: 0x0D0 (R/W)  Comparator Register 11 */
+        uint32_t RESERVED23[1U];
+  __IOM uint32_t FUNCTION11;             /*!< Offset: 0x0D8 (R/W)  Function Register 11 */
+        uint32_t RESERVED24[1U];
+  __IOM uint32_t COMP12;                 /*!< Offset: 0x0E0 (R/W)  Comparator Register 12 */
+        uint32_t RESERVED25[1U];
+  __IOM uint32_t FUNCTION12;             /*!< Offset: 0x0E8 (R/W)  Function Register 12 */
+        uint32_t RESERVED26[1U];
+  __IOM uint32_t COMP13;                 /*!< Offset: 0x0F0 (R/W)  Comparator Register 13 */
+        uint32_t RESERVED27[1U];
+  __IOM uint32_t FUNCTION13;             /*!< Offset: 0x0F8 (R/W)  Function Register 13 */
+        uint32_t RESERVED28[1U];
+  __IOM uint32_t COMP14;                 /*!< Offset: 0x100 (R/W)  Comparator Register 14 */
+        uint32_t RESERVED29[1U];
+  __IOM uint32_t FUNCTION14;             /*!< Offset: 0x108 (R/W)  Function Register 14 */
+        uint32_t RESERVED30[1U];
+  __IOM uint32_t COMP15;                 /*!< Offset: 0x110 (R/W)  Comparator Register 15 */
+        uint32_t RESERVED31[1U];
+  __IOM uint32_t FUNCTION15;             /*!< Offset: 0x118 (R/W)  Function Register 15 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_ID_Pos                27U                                         /*!< DWT FUNCTION: ID Position */
+#define DWT_FUNCTION_ID_Msk                (0x1FUL << DWT_FUNCTION_ID_Pos)             /*!< DWT FUNCTION: ID Mask */
+
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_ACTION_Pos             4U                                         /*!< DWT FUNCTION: ACTION Position */
+#define DWT_FUNCTION_ACTION_Msk            (0x3UL << DWT_FUNCTION_ACTION_Pos)          /*!< DWT FUNCTION: ACTION Mask */
+
+#define DWT_FUNCTION_MATCH_Pos              0U                                         /*!< DWT FUNCTION: MATCH Position */
+#define DWT_FUNCTION_MATCH_Msk             (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/)       /*!< DWT FUNCTION: MATCH Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IOM uint32_t PSCR;                   /*!< Offset: 0x308 (R/W)  Periodic Synchronization Control Register */
+        uint32_t RESERVED3[759U];
+  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER Register */
+  __IM  uint32_t ITFTTD0;                /*!< Offset: 0xEEC (R/ )  Integration Test FIFO Test Data 0 Register */
+  __IOM uint32_t ITATBCTR2;              /*!< Offset: 0xEF0 (R/W)  Integration Test ATB Control Register 2 */
+        uint32_t RESERVED4[1U];
+  __IM  uint32_t ITATBCTR0;              /*!< Offset: 0xEF8 (R/ )  Integration Test ATB Control Register 0 */
+  __IM  uint32_t ITFTTD1;                /*!< Offset: 0xEFC (R/ )  Integration Test FIFO Test Data 1 Register */
+  __IOM uint32_t ITCTRL;                 /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+        uint32_t RESERVED5[39U];
+  __IOM uint32_t CLAIMSET;               /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IOM uint32_t CLAIMCLR;               /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+        uint32_t RESERVED7[8U];
+  __IM  uint32_t DEVID;                  /*!< Offset: 0xFC8 (R/ )  Device Configuration Register */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  Device Type Identifier Register */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0U                                         /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_FOnMan_Pos                 6U                                         /*!< TPI FFCR: FOnMan Position */
+#define TPI_FFCR_FOnMan_Msk                (0x1UL << TPI_FFCR_FOnMan_Pos)              /*!< TPI FFCR: FOnMan Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0U                                         /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration Test FIFO Test Data 0 Register Definitions */
+#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos    29U                                         /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */
+#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk    (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos)  /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */
+
+#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos  27U                                         /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */
+#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk  (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos    26U                                         /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */
+#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk    (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos)  /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos  24U                                         /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */
+#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk  (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_data2_Pos      16U                                         /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */
+#define TPI_ITFTTD0_ATB_IF1_data2_Msk      (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos)   /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_data1_Pos       8U                                         /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */
+#define TPI_ITFTTD0_ATB_IF1_data1_Msk      (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos)   /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_data0_Pos       0U                                          /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */
+#define TPI_ITFTTD0_ATB_IF1_data0_Msk      (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */
+
+/* TPI Integration Test ATB Control Register 2 Register Definitions */
+#define TPI_ITATBCTR2_AFVALID2S_Pos         1U                                         /*!< TPI ITATBCTR2: AFVALID2S Position */
+#define TPI_ITATBCTR2_AFVALID2S_Msk        (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos)      /*!< TPI ITATBCTR2: AFVALID2SS Mask */
+
+#define TPI_ITATBCTR2_AFVALID1S_Pos         1U                                         /*!< TPI ITATBCTR2: AFVALID1S Position */
+#define TPI_ITATBCTR2_AFVALID1S_Msk        (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos)      /*!< TPI ITATBCTR2: AFVALID1SS Mask */
+
+#define TPI_ITATBCTR2_ATREADY2S_Pos         0U                                         /*!< TPI ITATBCTR2: ATREADY2S Position */
+#define TPI_ITATBCTR2_ATREADY2S_Msk        (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/)  /*!< TPI ITATBCTR2: ATREADY2S Mask */
+
+#define TPI_ITATBCTR2_ATREADY1S_Pos         0U                                         /*!< TPI ITATBCTR2: ATREADY1S Position */
+#define TPI_ITATBCTR2_ATREADY1S_Msk        (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/)  /*!< TPI ITATBCTR2: ATREADY1S Mask */
+
+/* TPI Integration Test FIFO Test Data 1 Register Definitions */
+#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos    29U                                         /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */
+#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk    (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos)  /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos  27U                                         /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */
+#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk  (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */
+
+#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos    26U                                         /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */
+#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk    (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos)  /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */
+
+#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos  24U                                         /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */
+#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk  (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_data2_Pos      16U                                         /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */
+#define TPI_ITFTTD1_ATB_IF2_data2_Msk      (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos)   /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_data1_Pos       8U                                         /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */
+#define TPI_ITFTTD1_ATB_IF2_data1_Msk      (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos)   /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_data0_Pos       0U                                          /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */
+#define TPI_ITFTTD1_ATB_IF2_data0_Msk      (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */
+
+/* TPI Integration Test ATB Control Register 0 Definitions */
+#define TPI_ITATBCTR0_AFVALID2S_Pos         1U                                         /*!< TPI ITATBCTR0: AFVALID2S Position */
+#define TPI_ITATBCTR0_AFVALID2S_Msk        (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos)      /*!< TPI ITATBCTR0: AFVALID2SS Mask */
+
+#define TPI_ITATBCTR0_AFVALID1S_Pos         1U                                         /*!< TPI ITATBCTR0: AFVALID1S Position */
+#define TPI_ITATBCTR0_AFVALID1S_Msk        (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos)      /*!< TPI ITATBCTR0: AFVALID1SS Mask */
+
+#define TPI_ITATBCTR0_ATREADY2S_Pos         0U                                         /*!< TPI ITATBCTR0: ATREADY2S Position */
+#define TPI_ITATBCTR0_ATREADY2S_Msk        (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/)  /*!< TPI ITATBCTR0: ATREADY2S Mask */
+
+#define TPI_ITATBCTR0_ATREADY1S_Pos         0U                                         /*!< TPI ITATBCTR0: ATREADY1S Position */
+#define TPI_ITATBCTR0_ATREADY1S_Msk        (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/)  /*!< TPI ITATBCTR0: ATREADY1S Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0U                                         /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_FIFOSZ_Pos                6U                                         /*!< TPI DEVID: FIFOSZ Position */
+#define TPI_DEVID_FIFOSZ_Msk               (0x7UL << TPI_DEVID_FIFOSZ_Pos)             /*!< TPI DEVID: FIFOSZ Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0U                                         /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  MPU Region Limit Address Register */
+        uint32_t RESERVED0[7U];
+  union {
+  __IOM uint32_t MAIR[2];
+  struct {
+  __IOM uint32_t MAIR0;                  /*!< Offset: 0x030 (R/W)  MPU Memory Attribute Indirection Register 0 */
+  __IOM uint32_t MAIR1;                  /*!< Offset: 0x034 (R/W)  MPU Memory Attribute Indirection Register 1 */
+  };
+  };
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  1U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_BASE_Pos                   5U                                            /*!< MPU RBAR: BASE Position */
+#define MPU_RBAR_BASE_Msk                  (0x7FFFFFFUL << MPU_RBAR_BASE_Pos)             /*!< MPU RBAR: BASE Mask */
+
+#define MPU_RBAR_SH_Pos                     3U                                            /*!< MPU RBAR: SH Position */
+#define MPU_RBAR_SH_Msk                    (0x3UL << MPU_RBAR_SH_Pos)                     /*!< MPU RBAR: SH Mask */
+
+#define MPU_RBAR_AP_Pos                     1U                                            /*!< MPU RBAR: AP Position */
+#define MPU_RBAR_AP_Msk                    (0x3UL << MPU_RBAR_AP_Pos)                     /*!< MPU RBAR: AP Mask */
+
+#define MPU_RBAR_XN_Pos                     0U                                            /*!< MPU RBAR: XN Position */
+#define MPU_RBAR_XN_Msk                    (01UL /*<< MPU_RBAR_XN_Pos*/)                  /*!< MPU RBAR: XN Mask */
+
+/* MPU Region Limit Address Register Definitions */
+#define MPU_RLAR_LIMIT_Pos                  5U                                            /*!< MPU RLAR: LIMIT Position */
+#define MPU_RLAR_LIMIT_Msk                 (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos)            /*!< MPU RLAR: LIMIT Mask */
+
+#define MPU_RLAR_AttrIndx_Pos               1U                                            /*!< MPU RLAR: AttrIndx Position */
+#define MPU_RLAR_AttrIndx_Msk              (0x7UL << MPU_RLAR_AttrIndx_Pos)               /*!< MPU RLAR: AttrIndx Mask */
+
+#define MPU_RLAR_EN_Pos                     0U                                            /*!< MPU RLAR: EN Position */
+#define MPU_RLAR_EN_Msk                    (1UL /*<< MPU_RLAR_EN_Pos*/)                   /*!< MPU RLAR: EN Mask */
+
+/* MPU Memory Attribute Indirection Register 0 Definitions */
+#define MPU_MAIR0_Attr3_Pos                24U                                            /*!< MPU MAIR0: Attr3 Position */
+#define MPU_MAIR0_Attr3_Msk                (0xFFUL << MPU_MAIR0_Attr3_Pos)                /*!< MPU MAIR0: Attr3 Mask */
+
+#define MPU_MAIR0_Attr2_Pos                16U                                            /*!< MPU MAIR0: Attr2 Position */
+#define MPU_MAIR0_Attr2_Msk                (0xFFUL << MPU_MAIR0_Attr2_Pos)                /*!< MPU MAIR0: Attr2 Mask */
+
+#define MPU_MAIR0_Attr1_Pos                 8U                                            /*!< MPU MAIR0: Attr1 Position */
+#define MPU_MAIR0_Attr1_Msk                (0xFFUL << MPU_MAIR0_Attr1_Pos)                /*!< MPU MAIR0: Attr1 Mask */
+
+#define MPU_MAIR0_Attr0_Pos                 0U                                            /*!< MPU MAIR0: Attr0 Position */
+#define MPU_MAIR0_Attr0_Msk                (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/)            /*!< MPU MAIR0: Attr0 Mask */
+
+/* MPU Memory Attribute Indirection Register 1 Definitions */
+#define MPU_MAIR1_Attr7_Pos                24U                                            /*!< MPU MAIR1: Attr7 Position */
+#define MPU_MAIR1_Attr7_Msk                (0xFFUL << MPU_MAIR1_Attr7_Pos)                /*!< MPU MAIR1: Attr7 Mask */
+
+#define MPU_MAIR1_Attr6_Pos                16U                                            /*!< MPU MAIR1: Attr6 Position */
+#define MPU_MAIR1_Attr6_Msk                (0xFFUL << MPU_MAIR1_Attr6_Pos)                /*!< MPU MAIR1: Attr6 Mask */
+
+#define MPU_MAIR1_Attr5_Pos                 8U                                            /*!< MPU MAIR1: Attr5 Position */
+#define MPU_MAIR1_Attr5_Msk                (0xFFUL << MPU_MAIR1_Attr5_Pos)                /*!< MPU MAIR1: Attr5 Mask */
+
+#define MPU_MAIR1_Attr4_Pos                 0U                                            /*!< MPU MAIR1: Attr4 Position */
+#define MPU_MAIR1_Attr4_Msk                (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/)            /*!< MPU MAIR1: Attr4 Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SAU     Security Attribution Unit (SAU)
+  \brief    Type definitions for the Security Attribution Unit (SAU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Security Attribution Unit (SAU).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SAU Control Register */
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x004 (R/ )  SAU Type Register */
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  SAU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  SAU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  SAU Region Limit Address Register */
+#endif
+} SAU_Type;
+
+/* SAU Control Register Definitions */
+#define SAU_CTRL_ALLNS_Pos                  1U                                            /*!< SAU CTRL: ALLNS Position */
+#define SAU_CTRL_ALLNS_Msk                 (1UL << SAU_CTRL_ALLNS_Pos)                    /*!< SAU CTRL: ALLNS Mask */
+
+#define SAU_CTRL_ENABLE_Pos                 0U                                            /*!< SAU CTRL: ENABLE Position */
+#define SAU_CTRL_ENABLE_Msk                (1UL /*<< SAU_CTRL_ENABLE_Pos*/)               /*!< SAU CTRL: ENABLE Mask */
+
+/* SAU Type Register Definitions */
+#define SAU_TYPE_SREGION_Pos                0U                                            /*!< SAU TYPE: SREGION Position */
+#define SAU_TYPE_SREGION_Msk               (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/)           /*!< SAU TYPE: SREGION Mask */
+
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+/* SAU Region Number Register Definitions */
+#define SAU_RNR_REGION_Pos                  0U                                            /*!< SAU RNR: REGION Position */
+#define SAU_RNR_REGION_Msk                 (0xFFUL /*<< SAU_RNR_REGION_Pos*/)             /*!< SAU RNR: REGION Mask */
+
+/* SAU Region Base Address Register Definitions */
+#define SAU_RBAR_BADDR_Pos                  5U                                            /*!< SAU RBAR: BADDR Position */
+#define SAU_RBAR_BADDR_Msk                 (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos)            /*!< SAU RBAR: BADDR Mask */
+
+/* SAU Region Limit Address Register Definitions */
+#define SAU_RLAR_LADDR_Pos                  5U                                            /*!< SAU RLAR: LADDR Position */
+#define SAU_RLAR_LADDR_Msk                 (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos)            /*!< SAU RLAR: LADDR Mask */
+
+#define SAU_RLAR_NSC_Pos                    1U                                            /*!< SAU RLAR: NSC Position */
+#define SAU_RLAR_NSC_Msk                   (1UL << SAU_RLAR_NSC_Pos)                      /*!< SAU RLAR: NSC Mask */
+
+#define SAU_RLAR_ENABLE_Pos                 0U                                            /*!< SAU RLAR: ENABLE Position */
+#define SAU_RLAR_ENABLE_Msk                (1UL /*<< SAU_RLAR_ENABLE_Pos*/)               /*!< SAU RLAR: ENABLE Mask */
+
+#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */
+
+/*@} end of group CMSIS_SAU */
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t DAUTHCTRL;              /*!< Offset: 0x014 (R/W)  Debug Authentication Control Register */
+  __IOM uint32_t DSCSR;                  /*!< Offset: 0x018 (R/W)  Debug Security Control and Status Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESTART_ST_Pos   26U                                            /*!< CoreDebug DHCSR: S_RESTART_ST Position */
+#define CoreDebug_DHCSR_S_RESTART_ST_Msk   (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos)      /*!< CoreDebug DHCSR: S_RESTART_ST Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_DWTENA_Pos         24U                                            /*!< CoreDebug DEMCR: DWTENA Position */
+#define CoreDebug_DEMCR_DWTENA_Msk         (1UL << CoreDebug_DEMCR_DWTENA_Pos)            /*!< CoreDebug DEMCR: DWTENA Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/* Debug Authentication Control Register Definitions */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos  3U                                            /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos)    /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */
+
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos  2U                                            /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos)    /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */
+
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos   1U                                            /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk  (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos)     /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */
+
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos   0U                                            /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk  (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */
+
+/* Debug Security Control and Status Register Definitions */
+#define CoreDebug_DSCSR_CDS_Pos            16U                                            /*!< CoreDebug DSCSR: CDS Position */
+#define CoreDebug_DSCSR_CDS_Msk            (1UL << CoreDebug_DSCSR_CDS_Pos)               /*!< CoreDebug DSCSR: CDS Mask */
+
+#define CoreDebug_DSCSR_SBRSEL_Pos          1U                                            /*!< CoreDebug DSCSR: SBRSEL Position */
+#define CoreDebug_DSCSR_SBRSEL_Msk         (1UL << CoreDebug_DSCSR_SBRSEL_Pos)            /*!< CoreDebug DSCSR: SBRSEL Mask */
+
+#define CoreDebug_DSCSR_SBRSELEN_Pos        0U                                            /*!< CoreDebug DSCSR: SBRSELEN Position */
+#define CoreDebug_DSCSR_SBRSELEN_Msk       (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/)      /*!< CoreDebug DSCSR: SBRSELEN Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+  #define SCS_BASE            (0xE000E000UL)                             /*!< System Control Space Base Address */
+  #define DWT_BASE            (0xE0001000UL)                             /*!< DWT Base Address */
+  #define TPI_BASE            (0xE0040000UL)                             /*!< TPI Base Address */
+  #define CoreDebug_BASE      (0xE000EDF0UL)                             /*!< Core Debug Base Address */
+  #define SysTick_BASE        (SCS_BASE +  0x0010UL)                     /*!< SysTick Base Address */
+  #define NVIC_BASE           (SCS_BASE +  0x0100UL)                     /*!< NVIC Base Address */
+  #define SCB_BASE            (SCS_BASE +  0x0D00UL)                     /*!< System Control Block Base Address */
+
+
+  #define SCB                 ((SCB_Type       *)     SCB_BASE         ) /*!< SCB configuration struct */
+  #define SysTick             ((SysTick_Type   *)     SysTick_BASE     ) /*!< SysTick configuration struct */
+  #define NVIC                ((NVIC_Type      *)     NVIC_BASE        ) /*!< NVIC configuration struct */
+  #define DWT                 ((DWT_Type       *)     DWT_BASE         ) /*!< DWT configuration struct */
+  #define TPI                 ((TPI_Type       *)     TPI_BASE         ) /*!< TPI configuration struct */
+  #define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE   ) /*!< Core Debug configuration struct */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE          (SCS_BASE +  0x0D90UL)                     /*!< Memory Protection Unit */
+    #define MPU               ((MPU_Type       *)     MPU_BASE         ) /*!< Memory Protection Unit */
+  #endif
+
+  #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+    #define SAU_BASE          (SCS_BASE +  0x0DD0UL)                     /*!< Security Attribution Unit */
+    #define SAU               ((SAU_Type       *)     SAU_BASE         ) /*!< Security Attribution Unit */
+  #endif
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+  #define SCS_BASE_NS         (0xE002E000UL)                             /*!< System Control Space Base Address (non-secure address space) */
+  #define CoreDebug_BASE_NS   (0xE002EDF0UL)                             /*!< Core Debug Base Address           (non-secure address space) */
+  #define SysTick_BASE_NS     (SCS_BASE_NS +  0x0010UL)                  /*!< SysTick Base Address              (non-secure address space) */
+  #define NVIC_BASE_NS        (SCS_BASE_NS +  0x0100UL)                  /*!< NVIC Base Address                 (non-secure address space) */
+  #define SCB_BASE_NS         (SCS_BASE_NS +  0x0D00UL)                  /*!< System Control Block Base Address (non-secure address space) */
+
+  #define SCB_NS              ((SCB_Type       *)     SCB_BASE_NS      ) /*!< SCB configuration struct          (non-secure address space) */
+  #define SysTick_NS          ((SysTick_Type   *)     SysTick_BASE_NS  ) /*!< SysTick configuration struct      (non-secure address space) */
+  #define NVIC_NS             ((NVIC_Type      *)     NVIC_BASE_NS     ) /*!< NVIC configuration struct         (non-secure address space) */
+  #define CoreDebug_NS        ((CoreDebug_Type *)     CoreDebug_BASE_NS) /*!< Core Debug configuration struct   (non-secure address space) */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE_NS       (SCS_BASE_NS +  0x0D90UL)                  /*!< Memory Protection Unit            (non-secure address space) */
+    #define MPU_NS            ((MPU_Type       *)     MPU_BASE_NS      ) /*!< Memory Protection Unit            (non-secure address space) */
+  #endif
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+/*#define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping   not available for Cortex-M23 */
+/*#define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping   not available for Cortex-M23 */
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* Special LR values for Secure/Non-Secure call handling and exception handling                                               */
+
+/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS                   */ 
+#define FNC_RETURN                 (0xFEFFFFFFUL)     /* bit [0] ignored when processing a branch                             */
+
+/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */
+#define EXC_RETURN_PREFIX          (0xFF000000UL)     /* bits [31:24] set to indicate an EXC_RETURN value                     */
+#define EXC_RETURN_S               (0x00000040UL)     /* bit [6] stack used to push registers: 0=Non-secure 1=Secure          */
+#define EXC_RETURN_DCRS            (0x00000020UL)     /* bit [5] stacking rules for called registers: 0=skipped 1=saved       */
+#define EXC_RETURN_FTYPE           (0x00000010UL)     /* bit [4] allocate stack for floating-point context: 0=done 1=skipped  */
+#define EXC_RETURN_MODE            (0x00000008UL)     /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode      */
+#define EXC_RETURN_SPSEL           (0x00000002UL)     /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP           */
+#define EXC_RETURN_ES              (0x00000001UL)     /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */
+
+/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking                            */
+#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)  /* Value for processors with floating-point extension:                  */
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125AUL)     /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE                   */
+#else 
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125BUL)     /* Value for processors without floating-point extension                */
+#endif
+
+	
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Get Interrupt Target State
+  \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+  \return             1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Target State
+  \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |=  ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Clear Interrupt Target State
+  \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IPR[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+           If VTOR is not present address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+#else
+  uint32_t *vectors = (uint32_t *)0x0U;
+#endif
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+#else
+  uint32_t *vectors = (uint32_t *)0x0U;
+#endif
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Enable Interrupt (non-secure)
+  \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status (non-secure)
+  \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt (non-secure)
+  \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt (non-secure)
+  \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt (non-secure)
+  \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt (non-secure)
+  \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt (non-secure)
+  \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority (non-secure)
+  \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every non-secure processor exception.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->IPR[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority (non-secure)
+  \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+#endif /*  defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv8.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##########################   SAU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SAUFunctions SAU Functions
+  \brief    Functions that configure the SAU.
+  @{
+ */
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+
+/**
+  \brief   Enable SAU
+  \details Enables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Enable(void)
+{
+    SAU->CTRL |=  (SAU_CTRL_ENABLE_Msk);
+}
+
+
+
+/**
+  \brief   Disable SAU
+  \details Disables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Disable(void)
+{
+    SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk);
+}
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_SAUFunctions */
+
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   System Tick Configuration (non-secure)
+  \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>TZ_SysTick_Config_NS</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                         /* Reload value impossible */
+  }
+
+  SysTick_NS->LOAD  = (uint32_t)(ticks - 1UL);                            /* set reload register */
+  TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick_NS->VAL   = 0UL;                                                /* Load the SysTick Counter Value */
+  SysTick_NS->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                      SysTick_CTRL_TICKINT_Msk   |
+                      SysTick_CTRL_ENABLE_Msk;                            /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                           /* Function successful */
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM23_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

Soft/STM32/Controle/Drivers/CMSIS/Include/core_cm3.h

@@ -1,40 +1,30 @@
 /**************************************************************************//**
  * @file     core_cm3.h
  * @brief    CMSIS Cortex-M3 Core Peripheral Access Layer Header File
- * @version  V4.30
- * @date     20. October 2015
+ * @version  V5.0.8
+ * @date     04. June 2018
  ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
-   All rights reserved.
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-   - Neither the name of ARM nor the names of its contributors may be used
-     to endorse or promote products derived from this software without
-     specific prior written permission.
-   *
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-   ---------------------------------------------------------------------------*/
-
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
 
 #if   defined ( __ICCARM__ )
- #pragma system_include         /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
   #pragma clang system_header   /* treat file as system include file */
 #endif
 
@@ -70,53 +60,15 @@
   @{
  */
 
+#include "cmsis_version.h"
+
 /*  CMSIS CM3 definitions */
-#define __CM3_CMSIS_VERSION_MAIN  (0x04U)                                      /*!< [31:16] CMSIS HAL main version */
-#define __CM3_CMSIS_VERSION_SUB   (0x1EU)                                      /*!< [15:0]  CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */
 #define __CM3_CMSIS_VERSION       ((__CM3_CMSIS_VERSION_MAIN << 16U) | \
-                                    __CM3_CMSIS_VERSION_SUB           )        /*!< CMSIS HAL version number */
-
-#define __CORTEX_M                (0x03U)                                      /*!< Cortex-M Core */
+                                    __CM3_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
 
-
-#if   defined ( __CC_ARM )
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-
-#elif defined ( __GNUC__ )
-  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __ICCARM__ )
-  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __TMS470__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __TASKING__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __CSMC__ )
-  #define __packed
-  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler */
-  #define __INLINE         inline                                    /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
-  #define __STATIC_INLINE  static inline
-
-#else
-  #error Unknown compiler
-#endif
+#define __CORTEX_M                (3U)                                   /*!< Cortex-M Core */
 
 /** __FPU_USED indicates whether an FPU is used or not.
     This core does not support an FPU at all
@@ -128,7 +80,7 @@
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
 
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
   #if defined __ARM_PCS_VFP
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
@@ -143,7 +95,7 @@
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
 
-#elif defined ( __TMS470__ )
+#elif defined ( __TI_ARM__ )
   #if defined __TI_VFP_SUPPORT__
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
@@ -160,8 +112,8 @@
 
 #endif
 
-#include "core_cmInstr.h"                /* Core Instruction Access */
-#include "core_cmFunc.h"                 /* Core Function Access */
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
 
 #ifdef __cplusplus
 }
@@ -191,7 +143,7 @@
   #endif
 
   #ifndef __NVIC_PRIO_BITS
-    #define __NVIC_PRIO_BITS          4U
+    #define __NVIC_PRIO_BITS          3U
     #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
   #endif
 
@@ -308,9 +260,11 @@ typedef union
   struct
   {
     uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
-    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
-    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
-    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0) */
+    uint32_t _reserved0:1;               /*!< bit:      9  Reserved */
+    uint32_t ICI_IT_1:6;                 /*!< bit: 10..15  ICI/IT part 1 */
+    uint32_t _reserved1:8;               /*!< bit: 16..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit */
+    uint32_t ICI_IT_2:2;                 /*!< bit: 25..26  ICI/IT part 2 */
     uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
     uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
     uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
@@ -336,12 +290,15 @@ typedef union
 #define xPSR_Q_Pos                         27U                                            /*!< xPSR: Q Position */
 #define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
 
-#define xPSR_IT_Pos                        25U                                            /*!< xPSR: IT Position */
-#define xPSR_IT_Msk                        (3UL << xPSR_IT_Pos)                           /*!< xPSR: IT Mask */
+#define xPSR_ICI_IT_2_Pos                  25U                                            /*!< xPSR: ICI/IT part 2 Position */
+#define xPSR_ICI_IT_2_Msk                  (3UL << xPSR_ICI_IT_2_Pos)                     /*!< xPSR: ICI/IT part 2 Mask */
 
 #define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
 #define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
 
+#define xPSR_ICI_IT_1_Pos                  10U                                            /*!< xPSR: ICI/IT part 1 Position */
+#define xPSR_ICI_IT_1_Msk                  (0x3FUL << xPSR_ICI_IT_1_Pos)                  /*!< xPSR: ICI/IT part 1 Mask */
+
 #define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
 #define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
 
@@ -487,7 +444,7 @@ typedef struct
 #define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
 
 /* SCB Vector Table Offset Register Definitions */
-#if (__CM3_REV < 0x0201U)                   /* core r2p1 */
+#if defined (__CM3_REV) && (__CM3_REV < 0x0201U)                   /* core r2p1 */
 #define SCB_VTOR_TBLBASE_Pos               29U                                            /*!< SCB VTOR: TBLBASE Position */
 #define SCB_VTOR_TBLBASE_Msk               (1UL << SCB_VTOR_TBLBASE_Pos)                  /*!< SCB VTOR: TBLBASE Mask */
 
@@ -602,6 +559,60 @@ typedef struct
 #define SCB_CFSR_MEMFAULTSR_Pos             0U                                            /*!< SCB CFSR: Memory Manage Fault Status Register Position */
 #define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
 
+/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_MMARVALID_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 7U)               /*!< SCB CFSR (MMFSR): MMARVALID Position */
+#define SCB_CFSR_MMARVALID_Msk             (1UL << SCB_CFSR_MMARVALID_Pos)                /*!< SCB CFSR (MMFSR): MMARVALID Mask */
+
+#define SCB_CFSR_MSTKERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 4U)               /*!< SCB CFSR (MMFSR): MSTKERR Position */
+#define SCB_CFSR_MSTKERR_Msk               (1UL << SCB_CFSR_MSTKERR_Pos)                  /*!< SCB CFSR (MMFSR): MSTKERR Mask */
+
+#define SCB_CFSR_MUNSTKERR_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 3U)               /*!< SCB CFSR (MMFSR): MUNSTKERR Position */
+#define SCB_CFSR_MUNSTKERR_Msk             (1UL << SCB_CFSR_MUNSTKERR_Pos)                /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */
+
+#define SCB_CFSR_DACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 1U)               /*!< SCB CFSR (MMFSR): DACCVIOL Position */
+#define SCB_CFSR_DACCVIOL_Msk              (1UL << SCB_CFSR_DACCVIOL_Pos)                 /*!< SCB CFSR (MMFSR): DACCVIOL Mask */
+
+#define SCB_CFSR_IACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 0U)               /*!< SCB CFSR (MMFSR): IACCVIOL Position */
+#define SCB_CFSR_IACCVIOL_Msk              (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/)             /*!< SCB CFSR (MMFSR): IACCVIOL Mask */
+
+/* BusFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_BFARVALID_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 7U)                  /*!< SCB CFSR (BFSR): BFARVALID Position */
+#define SCB_CFSR_BFARVALID_Msk            (1UL << SCB_CFSR_BFARVALID_Pos)                 /*!< SCB CFSR (BFSR): BFARVALID Mask */
+
+#define SCB_CFSR_STKERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 4U)                  /*!< SCB CFSR (BFSR): STKERR Position */
+#define SCB_CFSR_STKERR_Msk               (1UL << SCB_CFSR_STKERR_Pos)                    /*!< SCB CFSR (BFSR): STKERR Mask */
+
+#define SCB_CFSR_UNSTKERR_Pos             (SCB_CFSR_BUSFAULTSR_Pos + 3U)                  /*!< SCB CFSR (BFSR): UNSTKERR Position */
+#define SCB_CFSR_UNSTKERR_Msk             (1UL << SCB_CFSR_UNSTKERR_Pos)                  /*!< SCB CFSR (BFSR): UNSTKERR Mask */
+
+#define SCB_CFSR_IMPRECISERR_Pos          (SCB_CFSR_BUSFAULTSR_Pos + 2U)                  /*!< SCB CFSR (BFSR): IMPRECISERR Position */
+#define SCB_CFSR_IMPRECISERR_Msk          (1UL << SCB_CFSR_IMPRECISERR_Pos)               /*!< SCB CFSR (BFSR): IMPRECISERR Mask */
+
+#define SCB_CFSR_PRECISERR_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 1U)                  /*!< SCB CFSR (BFSR): PRECISERR Position */
+#define SCB_CFSR_PRECISERR_Msk            (1UL << SCB_CFSR_PRECISERR_Pos)                 /*!< SCB CFSR (BFSR): PRECISERR Mask */
+
+#define SCB_CFSR_IBUSERR_Pos              (SCB_CFSR_BUSFAULTSR_Pos + 0U)                  /*!< SCB CFSR (BFSR): IBUSERR Position */
+#define SCB_CFSR_IBUSERR_Msk              (1UL << SCB_CFSR_IBUSERR_Pos)                   /*!< SCB CFSR (BFSR): IBUSERR Mask */
+
+/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_DIVBYZERO_Pos            (SCB_CFSR_USGFAULTSR_Pos + 9U)                  /*!< SCB CFSR (UFSR): DIVBYZERO Position */
+#define SCB_CFSR_DIVBYZERO_Msk            (1UL << SCB_CFSR_DIVBYZERO_Pos)                 /*!< SCB CFSR (UFSR): DIVBYZERO Mask */
+
+#define SCB_CFSR_UNALIGNED_Pos            (SCB_CFSR_USGFAULTSR_Pos + 8U)                  /*!< SCB CFSR (UFSR): UNALIGNED Position */
+#define SCB_CFSR_UNALIGNED_Msk            (1UL << SCB_CFSR_UNALIGNED_Pos)                 /*!< SCB CFSR (UFSR): UNALIGNED Mask */
+
+#define SCB_CFSR_NOCP_Pos                 (SCB_CFSR_USGFAULTSR_Pos + 3U)                  /*!< SCB CFSR (UFSR): NOCP Position */
+#define SCB_CFSR_NOCP_Msk                 (1UL << SCB_CFSR_NOCP_Pos)                      /*!< SCB CFSR (UFSR): NOCP Mask */
+
+#define SCB_CFSR_INVPC_Pos                (SCB_CFSR_USGFAULTSR_Pos + 2U)                  /*!< SCB CFSR (UFSR): INVPC Position */
+#define SCB_CFSR_INVPC_Msk                (1UL << SCB_CFSR_INVPC_Pos)                     /*!< SCB CFSR (UFSR): INVPC Mask */
+
+#define SCB_CFSR_INVSTATE_Pos             (SCB_CFSR_USGFAULTSR_Pos + 1U)                  /*!< SCB CFSR (UFSR): INVSTATE Position */
+#define SCB_CFSR_INVSTATE_Msk             (1UL << SCB_CFSR_INVSTATE_Pos)                  /*!< SCB CFSR (UFSR): INVSTATE Mask */
+
+#define SCB_CFSR_UNDEFINSTR_Pos           (SCB_CFSR_USGFAULTSR_Pos + 0U)                  /*!< SCB CFSR (UFSR): UNDEFINSTR Position */
+#define SCB_CFSR_UNDEFINSTR_Msk           (1UL << SCB_CFSR_UNDEFINSTR_Pos)                /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */
+
 /* SCB Hard Fault Status Register Definitions */
 #define SCB_HFSR_DEBUGEVT_Pos              31U                                            /*!< SCB HFSR: DEBUGEVT Position */
 #define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
@@ -645,7 +656,7 @@ typedef struct
 {
         uint32_t RESERVED0[1U];
   __IM  uint32_t ICTR;                   /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register */
-#if ((defined __CM3_REV) && (__CM3_REV >= 0x200U))
+#if defined (__CM3_REV) && (__CM3_REV >= 0x200U)
   __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
 #else
         uint32_t RESERVED1[1U];
@@ -770,7 +781,7 @@ typedef struct
 
 /* ITM Trace Privilege Register Definitions */
 #define ITM_TPR_PRIVMASK_Pos                0U                                            /*!< ITM TPR: PRIVMASK Position */
-#define ITM_TPR_PRIVMASK_Msk               (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/)            /*!< ITM TPR: PRIVMASK Mask */
+#define ITM_TPR_PRIVMASK_Msk               (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/)     /*!< ITM TPR: PRIVMASK Mask */
 
 /* ITM Trace Control Register Definitions */
 #define ITM_TCR_BUSY_Pos                   23U                                            /*!< ITM TCR: BUSY Position */
@@ -984,7 +995,7 @@ typedef struct
  */
 typedef struct
 {
-  __IOM uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
   __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
         uint32_t RESERVED0[2U];
   __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
@@ -995,7 +1006,7 @@ typedef struct
   __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
   __IM  uint32_t FSCR;                   /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
         uint32_t RESERVED3[759U];
-  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER */
+  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER Register */
   __IM  uint32_t FIFO0;                  /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
   __IM  uint32_t ITATBCTR2;              /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
         uint32_t RESERVED4[1U];
@@ -1065,8 +1076,11 @@ typedef struct
 #define TPI_FIFO0_ETM0_Msk                 (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/)          /*!< TPI FIFO0: ETM0 Mask */
 
 /* TPI ITATBCTR2 Register Definitions */
-#define TPI_ITATBCTR2_ATREADY_Pos           0U                                         /*!< TPI ITATBCTR2: ATREADY Position */
-#define TPI_ITATBCTR2_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/)    /*!< TPI ITATBCTR2: ATREADY Mask */
+#define TPI_ITATBCTR2_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY2 Position */
+#define TPI_ITATBCTR2_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/)   /*!< TPI ITATBCTR2: ATREADY2 Mask */
+
+#define TPI_ITATBCTR2_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY1 Position */
+#define TPI_ITATBCTR2_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/)   /*!< TPI ITATBCTR2: ATREADY1 Mask */
 
 /* TPI Integration ITM Data Register Definitions (FIFO1) */
 #define TPI_FIFO1_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO1: ITM_ATVALID Position */
@@ -1091,12 +1105,15 @@ typedef struct
 #define TPI_FIFO1_ITM0_Msk                 (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/)          /*!< TPI FIFO1: ITM0 Mask */
 
 /* TPI ITATBCTR0 Register Definitions */
-#define TPI_ITATBCTR0_ATREADY_Pos           0U                                         /*!< TPI ITATBCTR0: ATREADY Position */
-#define TPI_ITATBCTR0_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/)    /*!< TPI ITATBCTR0: ATREADY Mask */
+#define TPI_ITATBCTR0_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY2 Position */
+#define TPI_ITATBCTR0_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/)   /*!< TPI ITATBCTR0: ATREADY2 Mask */
+
+#define TPI_ITATBCTR0_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY1 Position */
+#define TPI_ITATBCTR0_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/)   /*!< TPI ITATBCTR0: ATREADY1 Mask */
 
 /* TPI Integration Mode Control Register Definitions */
 #define TPI_ITCTRL_Mode_Pos                 0U                                         /*!< TPI ITCTRL: Mode Position */
-#define TPI_ITCTRL_Mode_Msk                (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+#define TPI_ITCTRL_Mode_Msk                (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
 
 /* TPI DEVID Register Definitions */
 #define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
@@ -1118,16 +1135,16 @@ typedef struct
 #define TPI_DEVID_NrTraceInput_Msk         (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
 
 /* TPI DEVTYPE Register Definitions */
-#define TPI_DEVTYPE_MajorType_Pos           4U                                         /*!< TPI DEVTYPE: MajorType Position */
-#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
-
-#define TPI_DEVTYPE_SubType_Pos             0U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
 #define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
 
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
 /*@}*/ /* end of group CMSIS_TPI */
 
 
-#if (__MPU_PRESENT == 1U)
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
 /**
   \ingroup  CMSIS_core_register
   \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
@@ -1153,6 +1170,8 @@ typedef struct
   __IOM uint32_t RASR_A3;                /*!< Offset: 0x028 (R/W)  MPU Alias 3 Region Attribute and Size Register */
 } MPU_Type;
 
+#define MPU_TYPE_RALIASES                  4U
+
 /* MPU Type Register Definitions */
 #define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
 #define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
@@ -1337,18 +1356,18 @@ typedef struct
 /**
   \brief   Mask and shift a bit field value for use in a register bit range.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of the bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted value.
 */
-#define _VAL2FLD(field, value)    ((value << field ## _Pos) & field ## _Msk)
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
 
 /**
   \brief     Mask and shift a register value to extract a bit filed value.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of register.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted bit field value.
 */
-#define _FLD2VAL(field, value)    ((value & field ## _Msk) >> field ## _Pos)
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
 
 /*@} end of group CMSIS_core_bitfield */
 
@@ -1360,7 +1379,7 @@ typedef struct
   @{
  */
 
-/* Memory mapping of Cortex-M3 Hardware */
+/* Memory mapping of Core Hardware */
 #define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
 #define ITM_BASE            (0xE0000000UL)                            /*!< ITM Base Address */
 #define DWT_BASE            (0xE0001000UL)                            /*!< DWT Base Address */
@@ -1379,7 +1398,7 @@ typedef struct
 #define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct */
 #define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE)   /*!< Core Debug configuration struct */
 
-#if (__MPU_PRESENT == 1U)
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
   #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
   #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
 #endif
@@ -1410,6 +1429,45 @@ typedef struct
   @{
  */
 
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+   #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
 /**
   \brief   Set Priority Grouping
   \details Sets the priority grouping field using the required unlock sequence.
@@ -1419,7 +1477,7 @@ typedef struct
            priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
   \param [in]      PriorityGroup  Priority grouping field.
  */
-__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
 {
   uint32_t reg_value;
   uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
@@ -1428,7 +1486,7 @@ __STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
   reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
   reg_value  =  (reg_value                                   |
                 ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
-                (PriorityGroupTmp << 8U)                      );              /* Insert write key and priorty group */
+                (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) );               /* Insert write key and priority group */
   SCB->AIRCR =  reg_value;
 }
 
@@ -1438,121 +1496,178 @@ __STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
   \details Reads the priority grouping field from the NVIC Interrupt Controller.
   \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
  */
-__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
 {
   return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
 }
 
 
 /**
-  \brief   Enable External Interrupt
-  \details Enables a device-specific interrupt in the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
 {
-  NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
-  \brief   Disable External Interrupt
-  \details Disables a device-specific interrupt in the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
 {
-  NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
 }
 
 
 /**
   \brief   Get Pending Interrupt
-  \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
-  \param [in]      IRQn  Interrupt number.
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
   \return             0  Interrupt status is not pending.
   \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
 {
-  return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
 }
 
 
 /**
   \brief   Set Pending Interrupt
-  \details Sets the pending bit of an external interrupt.
-  \param [in]      IRQn  Interrupt number. Value cannot be negative.
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
 {
-  NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
   \brief   Clear Pending Interrupt
-  \details Clears the pending bit of an external interrupt.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
 {
-  NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
   \brief   Get Active Interrupt
-  \details Reads the active register in NVIC and returns the active bit.
-  \param [in]      IRQn  Interrupt number.
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
   \return             0  Interrupt status is not active.
   \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
 {
-  return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
 }
 
 
 /**
   \brief   Set Interrupt Priority
-  \details Sets the priority of an interrupt.
-  \note    The priority cannot be set for every core interrupt.
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
   \param [in]      IRQn  Interrupt number.
   \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
  */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
 {
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
   {
-    SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+    NVIC->IP[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
   }
   else
   {
-    NVIC->IP[((uint32_t)(int32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+    SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
   }
 }
 
 
 /**
   \brief   Get Interrupt Priority
-  \details Reads the priority of an interrupt.
-           The interrupt number can be positive to specify an external (device specific) interrupt,
-           or negative to specify an internal (core) interrupt.
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
   \param [in]   IRQn  Interrupt number.
   \return             Interrupt Priority.
                       Value is aligned automatically to the implemented priority bits of the microcontroller.
  */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
 {
 
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
   {
-    return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+    return(((uint32_t)NVIC->IP[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
   }
   else
   {
-    return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+    return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
   }
 }
 
@@ -1609,11 +1724,42 @@ __STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGr
 }
 
 
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
 /**
   \brief   System Reset
   \details Initiates a system reset request to reset the MCU.
  */
-__STATIC_INLINE void NVIC_SystemReset(void)
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
 {
   __DSB();                                                          /* Ensure all outstanding memory accesses included
                                                                        buffered write are completed before reset */
@@ -1630,6 +1776,38 @@ __STATIC_INLINE void NVIC_SystemReset(void)
 
 /*@} end of CMSIS_Core_NVICFunctions */
 
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv7.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
 
 
 /* ##################################    SysTick function  ############################################ */
@@ -1640,7 +1818,7 @@ __STATIC_INLINE void NVIC_SystemReset(void)
   @{
  */
 
-#if (__Vendor_SysTickConfig == 0U)
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
 
 /**
   \brief   System Tick Configuration
@@ -1683,8 +1861,8 @@ __STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
   @{
  */
 
-extern volatile int32_t ITM_RxBuffer;                    /*!< External variable to receive characters. */
-#define                 ITM_RXBUFFER_EMPTY   0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+extern volatile int32_t ITM_RxBuffer;                              /*!< External variable to receive characters. */
+#define                 ITM_RXBUFFER_EMPTY  ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
 
 
 /**

Soft/STM32/Controle/Drivers/CMSIS/Include/core_cm33.h

@@ -0,0 +1,3002 @@
+/**************************************************************************//**
+ * @file     core_cm33.h
+ * @brief    CMSIS Cortex-M33 Core Peripheral Access Layer Header File
+ * @version  V5.0.9
+ * @date     06. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM33_H_GENERIC
+#define __CORE_CM33_H_GENERIC
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M33
+  @{
+ */
+
+#include "cmsis_version.h"
+
+/*  CMSIS CM33 definitions */
+#define __CM33_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                   /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM33_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)                    /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM33_CMSIS_VERSION       ((__CM33_CMSIS_VERSION_MAIN << 16U) | \
+                                     __CM33_CMSIS_VERSION_SUB           )      /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                 (33U)                                       /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+  #if defined (__TARGET_FPU_VFP)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U)
+    #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined (__ARM_PCS_VFP)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U)
+    #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U)
+    #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined (__ARMVFP__)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U)
+    #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined (__TI_VFP_SUPPORT__)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined (__FPU_VFP__)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM33_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM33_H_DEPENDANT
+#define __CORE_CM33_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM33_REV
+    #define __CM33_REV                0x0000U
+    #warning "__CM33_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             0U
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __SAUREGION_PRESENT
+    #define __SAUREGION_PRESENT       0U
+    #warning "__SAUREGION_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __DSP_PRESENT
+    #define __DSP_PRESENT             0U
+    #warning "__DSP_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          3U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M33 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core SAU Register
+  - Core FPU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:7;               /*!< bit: 20..26  Reserved */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27U                                            /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos                        16U                                            /*!< APSR: GE Position */
+#define APSR_GE_Msk                        (0xFUL << APSR_GE_Pos)                         /*!< APSR: GE Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:7;               /*!< bit:  9..15  Reserved */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0) */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27U                                            /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos                        25U                                            /*!< xPSR: IT Position */
+#define xPSR_IT_Msk                        (3UL << xPSR_IT_Pos)                           /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos                        16U                                            /*!< xPSR: GE Position */
+#define xPSR_GE_Msk                        (0xFUL << xPSR_GE_Pos)                         /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack-pointer select */
+    uint32_t FPCA:1;                     /*!< bit:      2  Floating-point context active */
+    uint32_t SFPA:1;                     /*!< bit:      3  Secure floating-point active */
+    uint32_t _reserved1:28;              /*!< bit:  4..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SFPA_Pos                    3U                                            /*!< CONTROL: SFPA Position */
+#define CONTROL_SFPA_Msk                   (1UL << CONTROL_SFPA_Pos)                      /*!< CONTROL: SFPA Mask */
+
+#define CONTROL_FPCA_Pos                    2U                                            /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk                   (1UL << CONTROL_FPCA_Pos)                      /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[16U];              /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[16U];
+  __IOM uint32_t ICER[16U];              /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[16U];
+  __IOM uint32_t ISPR[16U];              /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[16U];
+  __IOM uint32_t ICPR[16U];              /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[16U];
+  __IOM uint32_t IABR[16U];              /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[16U];
+  __IOM uint32_t ITNS[16U];              /*!< Offset: 0x280 (R/W)  Interrupt Non-Secure State Register */
+        uint32_t RESERVED5[16U];
+  __IOM uint8_t  IPR[496U];              /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+        uint32_t RESERVED6[580U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0U                                         /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+  __IOM uint8_t  SHPR[12U];              /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+  __IOM uint32_t CFSR;                   /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register */
+  __IOM uint32_t HFSR;                   /*!< Offset: 0x02C (R/W)  HardFault Status Register */
+  __IOM uint32_t DFSR;                   /*!< Offset: 0x030 (R/W)  Debug Fault Status Register */
+  __IOM uint32_t MMFAR;                  /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register */
+  __IOM uint32_t BFAR;                   /*!< Offset: 0x038 (R/W)  BusFault Address Register */
+  __IOM uint32_t AFSR;                   /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register */
+  __IM  uint32_t ID_PFR[2U];             /*!< Offset: 0x040 (R/ )  Processor Feature Register */
+  __IM  uint32_t ID_DFR;                 /*!< Offset: 0x048 (R/ )  Debug Feature Register */
+  __IM  uint32_t ID_ADR;                 /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register */
+  __IM  uint32_t ID_MMFR[4U];            /*!< Offset: 0x050 (R/ )  Memory Model Feature Register */
+  __IM  uint32_t ID_ISAR[6U];            /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register */
+  __IM  uint32_t CLIDR;                  /*!< Offset: 0x078 (R/ )  Cache Level ID register */
+  __IM  uint32_t CTR;                    /*!< Offset: 0x07C (R/ )  Cache Type register */
+  __IM  uint32_t CCSIDR;                 /*!< Offset: 0x080 (R/ )  Cache Size ID Register */
+  __IOM uint32_t CSSELR;                 /*!< Offset: 0x084 (R/W)  Cache Size Selection Register */
+  __IOM uint32_t CPACR;                  /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register */
+  __IOM uint32_t NSACR;                  /*!< Offset: 0x08C (R/W)  Non-Secure Access Control Register */
+        uint32_t RESERVED3[92U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0x200 ( /W)  Software Triggered Interrupt Register */
+        uint32_t RESERVED4[15U];
+  __IM  uint32_t MVFR0;                  /*!< Offset: 0x240 (R/ )  Media and VFP Feature Register 0 */
+  __IM  uint32_t MVFR1;                  /*!< Offset: 0x244 (R/ )  Media and VFP Feature Register 1 */
+  __IM  uint32_t MVFR2;                  /*!< Offset: 0x248 (R/ )  Media and VFP Feature Register 2 */
+        uint32_t RESERVED5[1U];
+  __OM  uint32_t ICIALLU;                /*!< Offset: 0x250 ( /W)  I-Cache Invalidate All to PoU */
+        uint32_t RESERVED6[1U];
+  __OM  uint32_t ICIMVAU;                /*!< Offset: 0x258 ( /W)  I-Cache Invalidate by MVA to PoU */
+  __OM  uint32_t DCIMVAC;                /*!< Offset: 0x25C ( /W)  D-Cache Invalidate by MVA to PoC */
+  __OM  uint32_t DCISW;                  /*!< Offset: 0x260 ( /W)  D-Cache Invalidate by Set-way */
+  __OM  uint32_t DCCMVAU;                /*!< Offset: 0x264 ( /W)  D-Cache Clean by MVA to PoU */
+  __OM  uint32_t DCCMVAC;                /*!< Offset: 0x268 ( /W)  D-Cache Clean by MVA to PoC */
+  __OM  uint32_t DCCSW;                  /*!< Offset: 0x26C ( /W)  D-Cache Clean by Set-way */
+  __OM  uint32_t DCCIMVAC;               /*!< Offset: 0x270 ( /W)  D-Cache Clean and Invalidate by MVA to PoC */
+  __OM  uint32_t DCCISW;                 /*!< Offset: 0x274 ( /W)  D-Cache Clean and Invalidate by Set-way */
+        uint32_t RESERVED7[6U];
+  __IOM uint32_t ITCMCR;                 /*!< Offset: 0x290 (R/W)  Instruction Tightly-Coupled Memory Control Register */
+  __IOM uint32_t DTCMCR;                 /*!< Offset: 0x294 (R/W)  Data Tightly-Coupled Memory Control Registers */
+  __IOM uint32_t AHBPCR;                 /*!< Offset: 0x298 (R/W)  AHBP Control Register */
+  __IOM uint32_t CACR;                   /*!< Offset: 0x29C (R/W)  L1 Cache Control Register */
+  __IOM uint32_t AHBSCR;                 /*!< Offset: 0x2A0 (R/W)  AHB Slave Control Register */
+        uint32_t RESERVED8[1U];
+  __IOM uint32_t ABFSR;                  /*!< Offset: 0x2A8 (R/W)  Auxiliary Bus Fault Status Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_PENDNMISET_Pos            31U                                            /*!< SCB ICSR: PENDNMISET Position */
+#define SCB_ICSR_PENDNMISET_Msk            (1UL << SCB_ICSR_PENDNMISET_Pos)               /*!< SCB ICSR: PENDNMISET Mask */
+
+#define SCB_ICSR_NMIPENDSET_Pos            SCB_ICSR_PENDNMISET_Pos                        /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */
+#define SCB_ICSR_NMIPENDSET_Msk            SCB_ICSR_PENDNMISET_Msk                        /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */
+
+#define SCB_ICSR_PENDNMICLR_Pos            30U                                            /*!< SCB ICSR: PENDNMICLR Position */
+#define SCB_ICSR_PENDNMICLR_Msk            (1UL << SCB_ICSR_PENDNMICLR_Pos)               /*!< SCB ICSR: PENDNMICLR Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_STTNS_Pos                 24U                                            /*!< SCB ICSR: STTNS Position (Security Extension) */
+#define SCB_ICSR_STTNS_Msk                 (1UL << SCB_ICSR_STTNS_Pos)                    /*!< SCB ICSR: STTNS Mask (Security Extension) */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIS_Pos                 14U                                            /*!< SCB AIRCR: PRIS Position */
+#define SCB_AIRCR_PRIS_Msk                 (1UL << SCB_AIRCR_PRIS_Pos)                    /*!< SCB AIRCR: PRIS Mask */
+
+#define SCB_AIRCR_BFHFNMINS_Pos            13U                                            /*!< SCB AIRCR: BFHFNMINS Position */
+#define SCB_AIRCR_BFHFNMINS_Msk            (1UL << SCB_AIRCR_BFHFNMINS_Pos)               /*!< SCB AIRCR: BFHFNMINS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8U                                            /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQS_Pos          3U                                            /*!< SCB AIRCR: SYSRESETREQS Position */
+#define SCB_AIRCR_SYSRESETREQS_Msk         (1UL << SCB_AIRCR_SYSRESETREQS_Pos)            /*!< SCB AIRCR: SYSRESETREQS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEPS_Pos              3U                                            /*!< SCB SCR: SLEEPDEEPS Position */
+#define SCB_SCR_SLEEPDEEPS_Msk             (1UL << SCB_SCR_SLEEPDEEPS_Pos)                /*!< SCB SCR: SLEEPDEEPS Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos                     18U                                            /*!< SCB CCR: BP Position */
+#define SCB_CCR_BP_Msk                     (1UL << SCB_CCR_BP_Pos)                        /*!< SCB CCR: BP Mask */
+
+#define SCB_CCR_IC_Pos                     17U                                            /*!< SCB CCR: IC Position */
+#define SCB_CCR_IC_Msk                     (1UL << SCB_CCR_IC_Pos)                        /*!< SCB CCR: IC Mask */
+
+#define SCB_CCR_DC_Pos                     16U                                            /*!< SCB CCR: DC Position */
+#define SCB_CCR_DC_Msk                     (1UL << SCB_CCR_DC_Pos)                        /*!< SCB CCR: DC Mask */
+
+#define SCB_CCR_STKOFHFNMIGN_Pos           10U                                            /*!< SCB CCR: STKOFHFNMIGN Position */
+#define SCB_CCR_STKOFHFNMIGN_Msk           (1UL << SCB_CCR_STKOFHFNMIGN_Pos)              /*!< SCB CCR: STKOFHFNMIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_HARDFAULTPENDED_Pos      21U                                            /*!< SCB SHCSR: HARDFAULTPENDED Position */
+#define SCB_SHCSR_HARDFAULTPENDED_Msk      (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos)         /*!< SCB SHCSR: HARDFAULTPENDED Mask */
+
+#define SCB_SHCSR_SECUREFAULTPENDED_Pos    20U                                            /*!< SCB SHCSR: SECUREFAULTPENDED Position */
+#define SCB_SHCSR_SECUREFAULTPENDED_Msk    (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos)       /*!< SCB SHCSR: SECUREFAULTPENDED Mask */
+
+#define SCB_SHCSR_SECUREFAULTENA_Pos       19U                                            /*!< SCB SHCSR: SECUREFAULTENA Position */
+#define SCB_SHCSR_SECUREFAULTENA_Msk       (1UL << SCB_SHCSR_SECUREFAULTENA_Pos)          /*!< SCB SHCSR: SECUREFAULTENA Mask */
+
+#define SCB_SHCSR_USGFAULTENA_Pos          18U                                            /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17U                                            /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16U                                            /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14U                                            /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13U                                            /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12U                                            /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8U                                            /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_NMIACT_Pos                5U                                            /*!< SCB SHCSR: NMIACT Position */
+#define SCB_SHCSR_NMIACT_Msk               (1UL << SCB_SHCSR_NMIACT_Pos)                  /*!< SCB SHCSR: NMIACT Mask */
+
+#define SCB_SHCSR_SECUREFAULTACT_Pos        4U                                            /*!< SCB SHCSR: SECUREFAULTACT Position */
+#define SCB_SHCSR_SECUREFAULTACT_Msk       (1UL << SCB_SHCSR_SECUREFAULTACT_Pos)          /*!< SCB SHCSR: SECUREFAULTACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3U                                            /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_HARDFAULTACT_Pos          2U                                            /*!< SCB SHCSR: HARDFAULTACT Position */
+#define SCB_SHCSR_HARDFAULTACT_Msk         (1UL << SCB_SHCSR_HARDFAULTACT_Pos)            /*!< SCB SHCSR: HARDFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1U                                            /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0U                                            /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16U                                            /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8U                                            /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0U                                            /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_MMARVALID_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 7U)               /*!< SCB CFSR (MMFSR): MMARVALID Position */
+#define SCB_CFSR_MMARVALID_Msk             (1UL << SCB_CFSR_MMARVALID_Pos)                /*!< SCB CFSR (MMFSR): MMARVALID Mask */
+
+#define SCB_CFSR_MLSPERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 5U)               /*!< SCB CFSR (MMFSR): MLSPERR Position */
+#define SCB_CFSR_MLSPERR_Msk               (1UL << SCB_CFSR_MLSPERR_Pos)                  /*!< SCB CFSR (MMFSR): MLSPERR Mask */
+
+#define SCB_CFSR_MSTKERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 4U)               /*!< SCB CFSR (MMFSR): MSTKERR Position */
+#define SCB_CFSR_MSTKERR_Msk               (1UL << SCB_CFSR_MSTKERR_Pos)                  /*!< SCB CFSR (MMFSR): MSTKERR Mask */
+
+#define SCB_CFSR_MUNSTKERR_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 3U)               /*!< SCB CFSR (MMFSR): MUNSTKERR Position */
+#define SCB_CFSR_MUNSTKERR_Msk             (1UL << SCB_CFSR_MUNSTKERR_Pos)                /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */
+
+#define SCB_CFSR_DACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 1U)               /*!< SCB CFSR (MMFSR): DACCVIOL Position */
+#define SCB_CFSR_DACCVIOL_Msk              (1UL << SCB_CFSR_DACCVIOL_Pos)                 /*!< SCB CFSR (MMFSR): DACCVIOL Mask */
+
+#define SCB_CFSR_IACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 0U)               /*!< SCB CFSR (MMFSR): IACCVIOL Position */
+#define SCB_CFSR_IACCVIOL_Msk              (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/)             /*!< SCB CFSR (MMFSR): IACCVIOL Mask */
+
+/* BusFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_BFARVALID_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 7U)                  /*!< SCB CFSR (BFSR): BFARVALID Position */
+#define SCB_CFSR_BFARVALID_Msk            (1UL << SCB_CFSR_BFARVALID_Pos)                 /*!< SCB CFSR (BFSR): BFARVALID Mask */
+
+#define SCB_CFSR_LSPERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 5U)                  /*!< SCB CFSR (BFSR): LSPERR Position */
+#define SCB_CFSR_LSPERR_Msk               (1UL << SCB_CFSR_LSPERR_Pos)                    /*!< SCB CFSR (BFSR): LSPERR Mask */
+
+#define SCB_CFSR_STKERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 4U)                  /*!< SCB CFSR (BFSR): STKERR Position */
+#define SCB_CFSR_STKERR_Msk               (1UL << SCB_CFSR_STKERR_Pos)                    /*!< SCB CFSR (BFSR): STKERR Mask */
+
+#define SCB_CFSR_UNSTKERR_Pos             (SCB_CFSR_BUSFAULTSR_Pos + 3U)                  /*!< SCB CFSR (BFSR): UNSTKERR Position */
+#define SCB_CFSR_UNSTKERR_Msk             (1UL << SCB_CFSR_UNSTKERR_Pos)                  /*!< SCB CFSR (BFSR): UNSTKERR Mask */
+
+#define SCB_CFSR_IMPRECISERR_Pos          (SCB_CFSR_BUSFAULTSR_Pos + 2U)                  /*!< SCB CFSR (BFSR): IMPRECISERR Position */
+#define SCB_CFSR_IMPRECISERR_Msk          (1UL << SCB_CFSR_IMPRECISERR_Pos)               /*!< SCB CFSR (BFSR): IMPRECISERR Mask */
+
+#define SCB_CFSR_PRECISERR_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 1U)                  /*!< SCB CFSR (BFSR): PRECISERR Position */
+#define SCB_CFSR_PRECISERR_Msk            (1UL << SCB_CFSR_PRECISERR_Pos)                 /*!< SCB CFSR (BFSR): PRECISERR Mask */
+
+#define SCB_CFSR_IBUSERR_Pos              (SCB_CFSR_BUSFAULTSR_Pos + 0U)                  /*!< SCB CFSR (BFSR): IBUSERR Position */
+#define SCB_CFSR_IBUSERR_Msk              (1UL << SCB_CFSR_IBUSERR_Pos)                   /*!< SCB CFSR (BFSR): IBUSERR Mask */
+
+/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_DIVBYZERO_Pos            (SCB_CFSR_USGFAULTSR_Pos + 9U)                  /*!< SCB CFSR (UFSR): DIVBYZERO Position */
+#define SCB_CFSR_DIVBYZERO_Msk            (1UL << SCB_CFSR_DIVBYZERO_Pos)                 /*!< SCB CFSR (UFSR): DIVBYZERO Mask */
+
+#define SCB_CFSR_UNALIGNED_Pos            (SCB_CFSR_USGFAULTSR_Pos + 8U)                  /*!< SCB CFSR (UFSR): UNALIGNED Position */
+#define SCB_CFSR_UNALIGNED_Msk            (1UL << SCB_CFSR_UNALIGNED_Pos)                 /*!< SCB CFSR (UFSR): UNALIGNED Mask */
+
+#define SCB_CFSR_STKOF_Pos                (SCB_CFSR_USGFAULTSR_Pos + 4U)                  /*!< SCB CFSR (UFSR): STKOF Position */
+#define SCB_CFSR_STKOF_Msk                (1UL << SCB_CFSR_STKOF_Pos)                     /*!< SCB CFSR (UFSR): STKOF Mask */
+
+#define SCB_CFSR_NOCP_Pos                 (SCB_CFSR_USGFAULTSR_Pos + 3U)                  /*!< SCB CFSR (UFSR): NOCP Position */
+#define SCB_CFSR_NOCP_Msk                 (1UL << SCB_CFSR_NOCP_Pos)                      /*!< SCB CFSR (UFSR): NOCP Mask */
+
+#define SCB_CFSR_INVPC_Pos                (SCB_CFSR_USGFAULTSR_Pos + 2U)                  /*!< SCB CFSR (UFSR): INVPC Position */
+#define SCB_CFSR_INVPC_Msk                (1UL << SCB_CFSR_INVPC_Pos)                     /*!< SCB CFSR (UFSR): INVPC Mask */
+
+#define SCB_CFSR_INVSTATE_Pos             (SCB_CFSR_USGFAULTSR_Pos + 1U)                  /*!< SCB CFSR (UFSR): INVSTATE Position */
+#define SCB_CFSR_INVSTATE_Msk             (1UL << SCB_CFSR_INVSTATE_Pos)                  /*!< SCB CFSR (UFSR): INVSTATE Mask */
+
+#define SCB_CFSR_UNDEFINSTR_Pos           (SCB_CFSR_USGFAULTSR_Pos + 0U)                  /*!< SCB CFSR (UFSR): UNDEFINSTR Position */
+#define SCB_CFSR_UNDEFINSTR_Msk           (1UL << SCB_CFSR_UNDEFINSTR_Pos)                /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31U                                            /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30U                                            /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1U                                            /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4U                                            /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3U                                            /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2U                                            /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1U                                            /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0U                                            /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/* SCB Non-Secure Access Control Register Definitions */
+#define SCB_NSACR_CP11_Pos                 11U                                            /*!< SCB NSACR: CP11 Position */
+#define SCB_NSACR_CP11_Msk                 (1UL << SCB_NSACR_CP11_Pos)                    /*!< SCB NSACR: CP11 Mask */
+
+#define SCB_NSACR_CP10_Pos                 10U                                            /*!< SCB NSACR: CP10 Position */
+#define SCB_NSACR_CP10_Msk                 (1UL << SCB_NSACR_CP10_Pos)                    /*!< SCB NSACR: CP10 Mask */
+
+#define SCB_NSACR_CPn_Pos                   0U                                            /*!< SCB NSACR: CPn Position */
+#define SCB_NSACR_CPn_Msk                  (1UL /*<< SCB_NSACR_CPn_Pos*/)                 /*!< SCB NSACR: CPn Mask */
+
+/* SCB Cache Level ID Register Definitions */
+#define SCB_CLIDR_LOUU_Pos                 27U                                            /*!< SCB CLIDR: LoUU Position */
+#define SCB_CLIDR_LOUU_Msk                 (7UL << SCB_CLIDR_LOUU_Pos)                    /*!< SCB CLIDR: LoUU Mask */
+
+#define SCB_CLIDR_LOC_Pos                  24U                                            /*!< SCB CLIDR: LoC Position */
+#define SCB_CLIDR_LOC_Msk                  (7UL << SCB_CLIDR_LOC_Pos)                     /*!< SCB CLIDR: LoC Mask */
+
+/* SCB Cache Type Register Definitions */
+#define SCB_CTR_FORMAT_Pos                 29U                                            /*!< SCB CTR: Format Position */
+#define SCB_CTR_FORMAT_Msk                 (7UL << SCB_CTR_FORMAT_Pos)                    /*!< SCB CTR: Format Mask */
+
+#define SCB_CTR_CWG_Pos                    24U                                            /*!< SCB CTR: CWG Position */
+#define SCB_CTR_CWG_Msk                    (0xFUL << SCB_CTR_CWG_Pos)                     /*!< SCB CTR: CWG Mask */
+
+#define SCB_CTR_ERG_Pos                    20U                                            /*!< SCB CTR: ERG Position */
+#define SCB_CTR_ERG_Msk                    (0xFUL << SCB_CTR_ERG_Pos)                     /*!< SCB CTR: ERG Mask */
+
+#define SCB_CTR_DMINLINE_Pos               16U                                            /*!< SCB CTR: DminLine Position */
+#define SCB_CTR_DMINLINE_Msk               (0xFUL << SCB_CTR_DMINLINE_Pos)                /*!< SCB CTR: DminLine Mask */
+
+#define SCB_CTR_IMINLINE_Pos                0U                                            /*!< SCB CTR: ImInLine Position */
+#define SCB_CTR_IMINLINE_Msk               (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/)            /*!< SCB CTR: ImInLine Mask */
+
+/* SCB Cache Size ID Register Definitions */
+#define SCB_CCSIDR_WT_Pos                  31U                                            /*!< SCB CCSIDR: WT Position */
+#define SCB_CCSIDR_WT_Msk                  (1UL << SCB_CCSIDR_WT_Pos)                     /*!< SCB CCSIDR: WT Mask */
+
+#define SCB_CCSIDR_WB_Pos                  30U                                            /*!< SCB CCSIDR: WB Position */
+#define SCB_CCSIDR_WB_Msk                  (1UL << SCB_CCSIDR_WB_Pos)                     /*!< SCB CCSIDR: WB Mask */
+
+#define SCB_CCSIDR_RA_Pos                  29U                                            /*!< SCB CCSIDR: RA Position */
+#define SCB_CCSIDR_RA_Msk                  (1UL << SCB_CCSIDR_RA_Pos)                     /*!< SCB CCSIDR: RA Mask */
+
+#define SCB_CCSIDR_WA_Pos                  28U                                            /*!< SCB CCSIDR: WA Position */
+#define SCB_CCSIDR_WA_Msk                  (1UL << SCB_CCSIDR_WA_Pos)                     /*!< SCB CCSIDR: WA Mask */
+
+#define SCB_CCSIDR_NUMSETS_Pos             13U                                            /*!< SCB CCSIDR: NumSets Position */
+#define SCB_CCSIDR_NUMSETS_Msk             (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos)           /*!< SCB CCSIDR: NumSets Mask */
+
+#define SCB_CCSIDR_ASSOCIATIVITY_Pos        3U                                            /*!< SCB CCSIDR: Associativity Position */
+#define SCB_CCSIDR_ASSOCIATIVITY_Msk       (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos)      /*!< SCB CCSIDR: Associativity Mask */
+
+#define SCB_CCSIDR_LINESIZE_Pos             0U                                            /*!< SCB CCSIDR: LineSize Position */
+#define SCB_CCSIDR_LINESIZE_Msk            (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/)           /*!< SCB CCSIDR: LineSize Mask */
+
+/* SCB Cache Size Selection Register Definitions */
+#define SCB_CSSELR_LEVEL_Pos                1U                                            /*!< SCB CSSELR: Level Position */
+#define SCB_CSSELR_LEVEL_Msk               (7UL << SCB_CSSELR_LEVEL_Pos)                  /*!< SCB CSSELR: Level Mask */
+
+#define SCB_CSSELR_IND_Pos                  0U                                            /*!< SCB CSSELR: InD Position */
+#define SCB_CSSELR_IND_Msk                 (1UL /*<< SCB_CSSELR_IND_Pos*/)                /*!< SCB CSSELR: InD Mask */
+
+/* SCB Software Triggered Interrupt Register Definitions */
+#define SCB_STIR_INTID_Pos                  0U                                            /*!< SCB STIR: INTID Position */
+#define SCB_STIR_INTID_Msk                 (0x1FFUL /*<< SCB_STIR_INTID_Pos*/)            /*!< SCB STIR: INTID Mask */
+
+/* SCB D-Cache Invalidate by Set-way Register Definitions */
+#define SCB_DCISW_WAY_Pos                  30U                                            /*!< SCB DCISW: Way Position */
+#define SCB_DCISW_WAY_Msk                  (3UL << SCB_DCISW_WAY_Pos)                     /*!< SCB DCISW: Way Mask */
+
+#define SCB_DCISW_SET_Pos                   5U                                            /*!< SCB DCISW: Set Position */
+#define SCB_DCISW_SET_Msk                  (0x1FFUL << SCB_DCISW_SET_Pos)                 /*!< SCB DCISW: Set Mask */
+
+/* SCB D-Cache Clean by Set-way Register Definitions */
+#define SCB_DCCSW_WAY_Pos                  30U                                            /*!< SCB DCCSW: Way Position */
+#define SCB_DCCSW_WAY_Msk                  (3UL << SCB_DCCSW_WAY_Pos)                     /*!< SCB DCCSW: Way Mask */
+
+#define SCB_DCCSW_SET_Pos                   5U                                            /*!< SCB DCCSW: Set Position */
+#define SCB_DCCSW_SET_Msk                  (0x1FFUL << SCB_DCCSW_SET_Pos)                 /*!< SCB DCCSW: Set Mask */
+
+/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */
+#define SCB_DCCISW_WAY_Pos                 30U                                            /*!< SCB DCCISW: Way Position */
+#define SCB_DCCISW_WAY_Msk                 (3UL << SCB_DCCISW_WAY_Pos)                    /*!< SCB DCCISW: Way Mask */
+
+#define SCB_DCCISW_SET_Pos                  5U                                            /*!< SCB DCCISW: Set Position */
+#define SCB_DCCISW_SET_Msk                 (0x1FFUL << SCB_DCCISW_SET_Pos)                /*!< SCB DCCISW: Set Mask */
+
+/* Instruction Tightly-Coupled Memory Control Register Definitions */
+#define SCB_ITCMCR_SZ_Pos                   3U                                            /*!< SCB ITCMCR: SZ Position */
+#define SCB_ITCMCR_SZ_Msk                  (0xFUL << SCB_ITCMCR_SZ_Pos)                   /*!< SCB ITCMCR: SZ Mask */
+
+#define SCB_ITCMCR_RETEN_Pos                2U                                            /*!< SCB ITCMCR: RETEN Position */
+#define SCB_ITCMCR_RETEN_Msk               (1UL << SCB_ITCMCR_RETEN_Pos)                  /*!< SCB ITCMCR: RETEN Mask */
+
+#define SCB_ITCMCR_RMW_Pos                  1U                                            /*!< SCB ITCMCR: RMW Position */
+#define SCB_ITCMCR_RMW_Msk                 (1UL << SCB_ITCMCR_RMW_Pos)                    /*!< SCB ITCMCR: RMW Mask */
+
+#define SCB_ITCMCR_EN_Pos                   0U                                            /*!< SCB ITCMCR: EN Position */
+#define SCB_ITCMCR_EN_Msk                  (1UL /*<< SCB_ITCMCR_EN_Pos*/)                 /*!< SCB ITCMCR: EN Mask */
+
+/* Data Tightly-Coupled Memory Control Register Definitions */
+#define SCB_DTCMCR_SZ_Pos                   3U                                            /*!< SCB DTCMCR: SZ Position */
+#define SCB_DTCMCR_SZ_Msk                  (0xFUL << SCB_DTCMCR_SZ_Pos)                   /*!< SCB DTCMCR: SZ Mask */
+
+#define SCB_DTCMCR_RETEN_Pos                2U                                            /*!< SCB DTCMCR: RETEN Position */
+#define SCB_DTCMCR_RETEN_Msk               (1UL << SCB_DTCMCR_RETEN_Pos)                   /*!< SCB DTCMCR: RETEN Mask */
+
+#define SCB_DTCMCR_RMW_Pos                  1U                                            /*!< SCB DTCMCR: RMW Position */
+#define SCB_DTCMCR_RMW_Msk                 (1UL << SCB_DTCMCR_RMW_Pos)                    /*!< SCB DTCMCR: RMW Mask */
+
+#define SCB_DTCMCR_EN_Pos                   0U                                            /*!< SCB DTCMCR: EN Position */
+#define SCB_DTCMCR_EN_Msk                  (1UL /*<< SCB_DTCMCR_EN_Pos*/)                 /*!< SCB DTCMCR: EN Mask */
+
+/* AHBP Control Register Definitions */
+#define SCB_AHBPCR_SZ_Pos                   1U                                            /*!< SCB AHBPCR: SZ Position */
+#define SCB_AHBPCR_SZ_Msk                  (7UL << SCB_AHBPCR_SZ_Pos)                     /*!< SCB AHBPCR: SZ Mask */
+
+#define SCB_AHBPCR_EN_Pos                   0U                                            /*!< SCB AHBPCR: EN Position */
+#define SCB_AHBPCR_EN_Msk                  (1UL /*<< SCB_AHBPCR_EN_Pos*/)                 /*!< SCB AHBPCR: EN Mask */
+
+/* L1 Cache Control Register Definitions */
+#define SCB_CACR_FORCEWT_Pos                2U                                            /*!< SCB CACR: FORCEWT Position */
+#define SCB_CACR_FORCEWT_Msk               (1UL << SCB_CACR_FORCEWT_Pos)                  /*!< SCB CACR: FORCEWT Mask */
+
+#define SCB_CACR_ECCEN_Pos                  1U                                            /*!< SCB CACR: ECCEN Position */
+#define SCB_CACR_ECCEN_Msk                 (1UL << SCB_CACR_ECCEN_Pos)                    /*!< SCB CACR: ECCEN Mask */
+
+#define SCB_CACR_SIWT_Pos                   0U                                            /*!< SCB CACR: SIWT Position */
+#define SCB_CACR_SIWT_Msk                  (1UL /*<< SCB_CACR_SIWT_Pos*/)                 /*!< SCB CACR: SIWT Mask */
+
+/* AHBS Control Register Definitions */
+#define SCB_AHBSCR_INITCOUNT_Pos           11U                                            /*!< SCB AHBSCR: INITCOUNT Position */
+#define SCB_AHBSCR_INITCOUNT_Msk           (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos)           /*!< SCB AHBSCR: INITCOUNT Mask */
+
+#define SCB_AHBSCR_TPRI_Pos                 2U                                            /*!< SCB AHBSCR: TPRI Position */
+#define SCB_AHBSCR_TPRI_Msk                (0x1FFUL << SCB_AHBPCR_TPRI_Pos)               /*!< SCB AHBSCR: TPRI Mask */
+
+#define SCB_AHBSCR_CTL_Pos                  0U                                            /*!< SCB AHBSCR: CTL Position*/
+#define SCB_AHBSCR_CTL_Msk                 (3UL /*<< SCB_AHBPCR_CTL_Pos*/)                /*!< SCB AHBSCR: CTL Mask */
+
+/* Auxiliary Bus Fault Status Register Definitions */
+#define SCB_ABFSR_AXIMTYPE_Pos              8U                                            /*!< SCB ABFSR: AXIMTYPE Position*/
+#define SCB_ABFSR_AXIMTYPE_Msk             (3UL << SCB_ABFSR_AXIMTYPE_Pos)                /*!< SCB ABFSR: AXIMTYPE Mask */
+
+#define SCB_ABFSR_EPPB_Pos                  4U                                            /*!< SCB ABFSR: EPPB Position*/
+#define SCB_ABFSR_EPPB_Msk                 (1UL << SCB_ABFSR_EPPB_Pos)                    /*!< SCB ABFSR: EPPB Mask */
+
+#define SCB_ABFSR_AXIM_Pos                  3U                                            /*!< SCB ABFSR: AXIM Position*/
+#define SCB_ABFSR_AXIM_Msk                 (1UL << SCB_ABFSR_AXIM_Pos)                    /*!< SCB ABFSR: AXIM Mask */
+
+#define SCB_ABFSR_AHBP_Pos                  2U                                            /*!< SCB ABFSR: AHBP Position*/
+#define SCB_ABFSR_AHBP_Msk                 (1UL << SCB_ABFSR_AHBP_Pos)                    /*!< SCB ABFSR: AHBP Mask */
+
+#define SCB_ABFSR_DTCM_Pos                  1U                                            /*!< SCB ABFSR: DTCM Position*/
+#define SCB_ABFSR_DTCM_Msk                 (1UL << SCB_ABFSR_DTCM_Pos)                    /*!< SCB ABFSR: DTCM Mask */
+
+#define SCB_ABFSR_ITCM_Pos                  0U                                            /*!< SCB ABFSR: ITCM Position*/
+#define SCB_ABFSR_ITCM_Msk                 (1UL /*<< SCB_ABFSR_ITCM_Pos*/)                /*!< SCB ABFSR: ITCM Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IM  uint32_t ICTR;                   /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register */
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+  __IOM uint32_t CPPWR;                  /*!< Offset: 0x00C (R/W)  Coprocessor Power Control  Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0U                                         /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+  \brief    Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __OM  union
+  {
+    __OM  uint8_t    u8;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit */
+    __OM  uint16_t   u16;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit */
+    __OM  uint32_t   u32;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit */
+  }  PORT [32U];                         /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers */
+        uint32_t RESERVED0[864U];
+  __IOM uint32_t TER;                    /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register */
+        uint32_t RESERVED1[15U];
+  __IOM uint32_t TPR;                    /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register */
+        uint32_t RESERVED2[15U];
+  __IOM uint32_t TCR;                    /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register */
+        uint32_t RESERVED3[29U];
+  __OM  uint32_t IWR;                    /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register */
+  __IM  uint32_t IRR;                    /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register */
+  __IOM uint32_t IMCR;                   /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register */
+        uint32_t RESERVED4[43U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register */
+        uint32_t RESERVED5[1U];
+  __IM  uint32_t DEVARCH;                /*!< Offset: 0xFBC (R/ )  ITM Device Architecture Register */
+        uint32_t RESERVED6[4U];
+  __IM  uint32_t PID4;                   /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __IM  uint32_t PID5;                   /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __IM  uint32_t PID6;                   /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __IM  uint32_t PID7;                   /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __IM  uint32_t PID0;                   /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __IM  uint32_t PID1;                   /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __IM  uint32_t PID2;                   /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __IM  uint32_t PID3;                   /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __IM  uint32_t CID0;                   /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __IM  uint32_t CID1;                   /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __IM  uint32_t CID2;                   /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __IM  uint32_t CID3;                   /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Stimulus Port Register Definitions */
+#define ITM_STIM_DISABLED_Pos               1U                                            /*!< ITM STIM: DISABLED Position */
+#define ITM_STIM_DISABLED_Msk              (0x1UL << ITM_STIM_DISABLED_Pos)               /*!< ITM STIM: DISABLED Mask */
+
+#define ITM_STIM_FIFOREADY_Pos              0U                                            /*!< ITM STIM: FIFOREADY Position */
+#define ITM_STIM_FIFOREADY_Msk             (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/)          /*!< ITM STIM: FIFOREADY Mask */
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0U                                            /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/)     /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23U                                            /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TRACEBUSID_Pos             16U                                            /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TRACEBUSID_Msk             (0x7FUL << ITM_TCR_TRACEBUSID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10U                                            /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPRESCALE_Pos              8U                                            /*!< ITM TCR: TSPRESCALE Position */
+#define ITM_TCR_TSPRESCALE_Msk             (3UL << ITM_TCR_TSPRESCALE_Pos)                /*!< ITM TCR: TSPRESCALE Mask */
+
+#define ITM_TCR_STALLENA_Pos                5U                                            /*!< ITM TCR: STALLENA Position */
+#define ITM_TCR_STALLENA_Msk               (1UL << ITM_TCR_STALLENA_Pos)                  /*!< ITM TCR: STALLENA Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4U                                            /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3U                                            /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2U                                            /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1U                                            /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0U                                            /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0U                                            /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0U                                            /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0U                                            /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2U                                            /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1U                                            /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0U                                            /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+  __IOM uint32_t CYCCNT;                 /*!< Offset: 0x004 (R/W)  Cycle Count Register */
+  __IOM uint32_t CPICNT;                 /*!< Offset: 0x008 (R/W)  CPI Count Register */
+  __IOM uint32_t EXCCNT;                 /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register */
+  __IOM uint32_t SLEEPCNT;               /*!< Offset: 0x010 (R/W)  Sleep Count Register */
+  __IOM uint32_t LSUCNT;                 /*!< Offset: 0x014 (R/W)  LSU Count Register */
+  __IOM uint32_t FOLDCNT;                /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register */
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+        uint32_t RESERVED3[1U];
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+        uint32_t RESERVED5[1U];
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED6[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+        uint32_t RESERVED7[1U];
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+        uint32_t RESERVED8[1U];
+  __IOM uint32_t COMP4;                  /*!< Offset: 0x060 (R/W)  Comparator Register 4 */
+        uint32_t RESERVED9[1U];
+  __IOM uint32_t FUNCTION4;              /*!< Offset: 0x068 (R/W)  Function Register 4 */
+        uint32_t RESERVED10[1U];
+  __IOM uint32_t COMP5;                  /*!< Offset: 0x070 (R/W)  Comparator Register 5 */
+        uint32_t RESERVED11[1U];
+  __IOM uint32_t FUNCTION5;              /*!< Offset: 0x078 (R/W)  Function Register 5 */
+        uint32_t RESERVED12[1U];
+  __IOM uint32_t COMP6;                  /*!< Offset: 0x080 (R/W)  Comparator Register 6 */
+        uint32_t RESERVED13[1U];
+  __IOM uint32_t FUNCTION6;              /*!< Offset: 0x088 (R/W)  Function Register 6 */
+        uint32_t RESERVED14[1U];
+  __IOM uint32_t COMP7;                  /*!< Offset: 0x090 (R/W)  Comparator Register 7 */
+        uint32_t RESERVED15[1U];
+  __IOM uint32_t FUNCTION7;              /*!< Offset: 0x098 (R/W)  Function Register 7 */
+        uint32_t RESERVED16[1U];
+  __IOM uint32_t COMP8;                  /*!< Offset: 0x0A0 (R/W)  Comparator Register 8 */
+        uint32_t RESERVED17[1U];
+  __IOM uint32_t FUNCTION8;              /*!< Offset: 0x0A8 (R/W)  Function Register 8 */
+        uint32_t RESERVED18[1U];
+  __IOM uint32_t COMP9;                  /*!< Offset: 0x0B0 (R/W)  Comparator Register 9 */
+        uint32_t RESERVED19[1U];
+  __IOM uint32_t FUNCTION9;              /*!< Offset: 0x0B8 (R/W)  Function Register 9 */
+        uint32_t RESERVED20[1U];
+  __IOM uint32_t COMP10;                 /*!< Offset: 0x0C0 (R/W)  Comparator Register 10 */
+        uint32_t RESERVED21[1U];
+  __IOM uint32_t FUNCTION10;             /*!< Offset: 0x0C8 (R/W)  Function Register 10 */
+        uint32_t RESERVED22[1U];
+  __IOM uint32_t COMP11;                 /*!< Offset: 0x0D0 (R/W)  Comparator Register 11 */
+        uint32_t RESERVED23[1U];
+  __IOM uint32_t FUNCTION11;             /*!< Offset: 0x0D8 (R/W)  Function Register 11 */
+        uint32_t RESERVED24[1U];
+  __IOM uint32_t COMP12;                 /*!< Offset: 0x0E0 (R/W)  Comparator Register 12 */
+        uint32_t RESERVED25[1U];
+  __IOM uint32_t FUNCTION12;             /*!< Offset: 0x0E8 (R/W)  Function Register 12 */
+        uint32_t RESERVED26[1U];
+  __IOM uint32_t COMP13;                 /*!< Offset: 0x0F0 (R/W)  Comparator Register 13 */
+        uint32_t RESERVED27[1U];
+  __IOM uint32_t FUNCTION13;             /*!< Offset: 0x0F8 (R/W)  Function Register 13 */
+        uint32_t RESERVED28[1U];
+  __IOM uint32_t COMP14;                 /*!< Offset: 0x100 (R/W)  Comparator Register 14 */
+        uint32_t RESERVED29[1U];
+  __IOM uint32_t FUNCTION14;             /*!< Offset: 0x108 (R/W)  Function Register 14 */
+        uint32_t RESERVED30[1U];
+  __IOM uint32_t COMP15;                 /*!< Offset: 0x110 (R/W)  Comparator Register 15 */
+        uint32_t RESERVED31[1U];
+  __IOM uint32_t FUNCTION15;             /*!< Offset: 0x118 (R/W)  Function Register 15 */
+        uint32_t RESERVED32[934U];
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R  )  Lock Status Register */
+        uint32_t RESERVED33[1U];
+  __IM  uint32_t DEVARCH;                /*!< Offset: 0xFBC (R/ )  Device Architecture Register */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCDISS_Pos               23U                                         /*!< DWT CTRL: CYCDISS Position */
+#define DWT_CTRL_CYCDISS_Msk               (0x1UL << DWT_CTRL_CYCDISS_Pos)             /*!< DWT CTRL: CYCDISS Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22U                                         /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21U                                         /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20U                                         /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19U                                         /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18U                                         /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17U                                         /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16U                                         /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12U                                         /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10U                                         /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9U                                         /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5U                                         /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1U                                         /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0U                                         /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0U                                         /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0U                                         /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0U                                         /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0U                                         /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0U                                         /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_ID_Pos                27U                                         /*!< DWT FUNCTION: ID Position */
+#define DWT_FUNCTION_ID_Msk                (0x1FUL << DWT_FUNCTION_ID_Pos)             /*!< DWT FUNCTION: ID Mask */
+
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_ACTION_Pos             4U                                         /*!< DWT FUNCTION: ACTION Position */
+#define DWT_FUNCTION_ACTION_Msk            (0x1UL << DWT_FUNCTION_ACTION_Pos)          /*!< DWT FUNCTION: ACTION Mask */
+
+#define DWT_FUNCTION_MATCH_Pos              0U                                         /*!< DWT FUNCTION: MATCH Position */
+#define DWT_FUNCTION_MATCH_Msk             (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/)       /*!< DWT FUNCTION: MATCH Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IOM uint32_t PSCR;                   /*!< Offset: 0x308 (R/W)  Periodic Synchronization Control Register */
+        uint32_t RESERVED3[759U];
+  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER Register */
+  __IM  uint32_t ITFTTD0;                /*!< Offset: 0xEEC (R/ )  Integration Test FIFO Test Data 0 Register */
+  __IOM uint32_t ITATBCTR2;              /*!< Offset: 0xEF0 (R/W)  Integration Test ATB Control Register 2 */
+        uint32_t RESERVED4[1U];
+  __IM  uint32_t ITATBCTR0;              /*!< Offset: 0xEF8 (R/ )  Integration Test ATB Control Register 0 */
+  __IM  uint32_t ITFTTD1;                /*!< Offset: 0xEFC (R/ )  Integration Test FIFO Test Data 1 Register */
+  __IOM uint32_t ITCTRL;                 /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+        uint32_t RESERVED5[39U];
+  __IOM uint32_t CLAIMSET;               /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IOM uint32_t CLAIMCLR;               /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+        uint32_t RESERVED7[8U];
+  __IM  uint32_t DEVID;                  /*!< Offset: 0xFC8 (R/ )  Device Configuration Register */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  Device Type Identifier Register */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0U                                         /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_FOnMan_Pos                 6U                                         /*!< TPI FFCR: FOnMan Position */
+#define TPI_FFCR_FOnMan_Msk                (0x1UL << TPI_FFCR_FOnMan_Pos)              /*!< TPI FFCR: FOnMan Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0U                                         /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration Test FIFO Test Data 0 Register Definitions */
+#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos    29U                                         /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */
+#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk    (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos)  /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */
+
+#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos  27U                                         /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */
+#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk  (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos    26U                                         /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */
+#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk    (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos)  /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos  24U                                         /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */
+#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk  (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_data2_Pos      16U                                         /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */
+#define TPI_ITFTTD0_ATB_IF1_data2_Msk      (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos)   /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_data1_Pos       8U                                         /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */
+#define TPI_ITFTTD0_ATB_IF1_data1_Msk      (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos)   /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_data0_Pos       0U                                          /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */
+#define TPI_ITFTTD0_ATB_IF1_data0_Msk      (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */
+
+/* TPI Integration Test ATB Control Register 2 Register Definitions */
+#define TPI_ITATBCTR2_AFVALID2S_Pos         1U                                         /*!< TPI ITATBCTR2: AFVALID2S Position */
+#define TPI_ITATBCTR2_AFVALID2S_Msk        (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos)      /*!< TPI ITATBCTR2: AFVALID2SS Mask */
+
+#define TPI_ITATBCTR2_AFVALID1S_Pos         1U                                         /*!< TPI ITATBCTR2: AFVALID1S Position */
+#define TPI_ITATBCTR2_AFVALID1S_Msk        (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos)      /*!< TPI ITATBCTR2: AFVALID1SS Mask */
+
+#define TPI_ITATBCTR2_ATREADY2S_Pos         0U                                         /*!< TPI ITATBCTR2: ATREADY2S Position */
+#define TPI_ITATBCTR2_ATREADY2S_Msk        (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/)  /*!< TPI ITATBCTR2: ATREADY2S Mask */
+
+#define TPI_ITATBCTR2_ATREADY1S_Pos         0U                                         /*!< TPI ITATBCTR2: ATREADY1S Position */
+#define TPI_ITATBCTR2_ATREADY1S_Msk        (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/)  /*!< TPI ITATBCTR2: ATREADY1S Mask */
+
+/* TPI Integration Test FIFO Test Data 1 Register Definitions */
+#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos    29U                                         /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */
+#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk    (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos)  /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos  27U                                         /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */
+#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk  (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */
+
+#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos    26U                                         /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */
+#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk    (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos)  /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */
+
+#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos  24U                                         /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */
+#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk  (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_data2_Pos      16U                                         /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */
+#define TPI_ITFTTD1_ATB_IF2_data2_Msk      (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos)   /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_data1_Pos       8U                                         /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */
+#define TPI_ITFTTD1_ATB_IF2_data1_Msk      (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos)   /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_data0_Pos       0U                                          /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */
+#define TPI_ITFTTD1_ATB_IF2_data0_Msk      (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */
+
+/* TPI Integration Test ATB Control Register 0 Definitions */
+#define TPI_ITATBCTR0_AFVALID2S_Pos         1U                                         /*!< TPI ITATBCTR0: AFVALID2S Position */
+#define TPI_ITATBCTR0_AFVALID2S_Msk        (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos)      /*!< TPI ITATBCTR0: AFVALID2SS Mask */
+
+#define TPI_ITATBCTR0_AFVALID1S_Pos         1U                                         /*!< TPI ITATBCTR0: AFVALID1S Position */
+#define TPI_ITATBCTR0_AFVALID1S_Msk        (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos)      /*!< TPI ITATBCTR0: AFVALID1SS Mask */
+
+#define TPI_ITATBCTR0_ATREADY2S_Pos         0U                                         /*!< TPI ITATBCTR0: ATREADY2S Position */
+#define TPI_ITATBCTR0_ATREADY2S_Msk        (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/)  /*!< TPI ITATBCTR0: ATREADY2S Mask */
+
+#define TPI_ITATBCTR0_ATREADY1S_Pos         0U                                         /*!< TPI ITATBCTR0: ATREADY1S Position */
+#define TPI_ITATBCTR0_ATREADY1S_Msk        (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/)  /*!< TPI ITATBCTR0: ATREADY1S Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0U                                         /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_FIFOSZ_Pos                6U                                         /*!< TPI DEVID: FIFOSZ Position */
+#define TPI_DEVID_FIFOSZ_Msk               (0x7UL << TPI_DEVID_FIFOSZ_Pos)             /*!< TPI DEVID: FIFOSZ Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0U                                         /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  MPU Region Limit Address Register */
+  __IOM uint32_t RBAR_A1;                /*!< Offset: 0x014 (R/W)  MPU Region Base Address Register Alias 1 */
+  __IOM uint32_t RLAR_A1;                /*!< Offset: 0x018 (R/W)  MPU Region Limit Address Register Alias 1 */
+  __IOM uint32_t RBAR_A2;                /*!< Offset: 0x01C (R/W)  MPU Region Base Address Register Alias 2 */
+  __IOM uint32_t RLAR_A2;                /*!< Offset: 0x020 (R/W)  MPU Region Limit Address Register Alias 2 */
+  __IOM uint32_t RBAR_A3;                /*!< Offset: 0x024 (R/W)  MPU Region Base Address Register Alias 3 */
+  __IOM uint32_t RLAR_A3;                /*!< Offset: 0x028 (R/W)  MPU Region Limit Address Register Alias 3 */
+        uint32_t RESERVED0[1];
+  union {
+  __IOM uint32_t MAIR[2];
+  struct {
+  __IOM uint32_t MAIR0;                  /*!< Offset: 0x030 (R/W)  MPU Memory Attribute Indirection Register 0 */
+  __IOM uint32_t MAIR1;                  /*!< Offset: 0x034 (R/W)  MPU Memory Attribute Indirection Register 1 */
+  };
+  };
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  4U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_BASE_Pos                   5U                                            /*!< MPU RBAR: BASE Position */
+#define MPU_RBAR_BASE_Msk                  (0x7FFFFFFUL << MPU_RBAR_BASE_Pos)             /*!< MPU RBAR: BASE Mask */
+
+#define MPU_RBAR_SH_Pos                     3U                                            /*!< MPU RBAR: SH Position */
+#define MPU_RBAR_SH_Msk                    (0x3UL << MPU_RBAR_SH_Pos)                     /*!< MPU RBAR: SH Mask */
+
+#define MPU_RBAR_AP_Pos                     1U                                            /*!< MPU RBAR: AP Position */
+#define MPU_RBAR_AP_Msk                    (0x3UL << MPU_RBAR_AP_Pos)                     /*!< MPU RBAR: AP Mask */
+
+#define MPU_RBAR_XN_Pos                     0U                                            /*!< MPU RBAR: XN Position */
+#define MPU_RBAR_XN_Msk                    (01UL /*<< MPU_RBAR_XN_Pos*/)                  /*!< MPU RBAR: XN Mask */
+
+/* MPU Region Limit Address Register Definitions */
+#define MPU_RLAR_LIMIT_Pos                  5U                                            /*!< MPU RLAR: LIMIT Position */
+#define MPU_RLAR_LIMIT_Msk                 (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos)            /*!< MPU RLAR: LIMIT Mask */
+
+#define MPU_RLAR_AttrIndx_Pos               1U                                            /*!< MPU RLAR: AttrIndx Position */
+#define MPU_RLAR_AttrIndx_Msk              (0x7UL << MPU_RLAR_AttrIndx_Pos)               /*!< MPU RLAR: AttrIndx Mask */
+
+#define MPU_RLAR_EN_Pos                     0U                                            /*!< MPU RLAR: Region enable bit Position */
+#define MPU_RLAR_EN_Msk                    (1UL /*<< MPU_RLAR_EN_Pos*/)                   /*!< MPU RLAR: Region enable bit Disable Mask */
+
+/* MPU Memory Attribute Indirection Register 0 Definitions */
+#define MPU_MAIR0_Attr3_Pos                24U                                            /*!< MPU MAIR0: Attr3 Position */
+#define MPU_MAIR0_Attr3_Msk                (0xFFUL << MPU_MAIR0_Attr3_Pos)                /*!< MPU MAIR0: Attr3 Mask */
+
+#define MPU_MAIR0_Attr2_Pos                16U                                            /*!< MPU MAIR0: Attr2 Position */
+#define MPU_MAIR0_Attr2_Msk                (0xFFUL << MPU_MAIR0_Attr2_Pos)                /*!< MPU MAIR0: Attr2 Mask */
+
+#define MPU_MAIR0_Attr1_Pos                 8U                                            /*!< MPU MAIR0: Attr1 Position */
+#define MPU_MAIR0_Attr1_Msk                (0xFFUL << MPU_MAIR0_Attr1_Pos)                /*!< MPU MAIR0: Attr1 Mask */
+
+#define MPU_MAIR0_Attr0_Pos                 0U                                            /*!< MPU MAIR0: Attr0 Position */
+#define MPU_MAIR0_Attr0_Msk                (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/)            /*!< MPU MAIR0: Attr0 Mask */
+
+/* MPU Memory Attribute Indirection Register 1 Definitions */
+#define MPU_MAIR1_Attr7_Pos                24U                                            /*!< MPU MAIR1: Attr7 Position */
+#define MPU_MAIR1_Attr7_Msk                (0xFFUL << MPU_MAIR1_Attr7_Pos)                /*!< MPU MAIR1: Attr7 Mask */
+
+#define MPU_MAIR1_Attr6_Pos                16U                                            /*!< MPU MAIR1: Attr6 Position */
+#define MPU_MAIR1_Attr6_Msk                (0xFFUL << MPU_MAIR1_Attr6_Pos)                /*!< MPU MAIR1: Attr6 Mask */
+
+#define MPU_MAIR1_Attr5_Pos                 8U                                            /*!< MPU MAIR1: Attr5 Position */
+#define MPU_MAIR1_Attr5_Msk                (0xFFUL << MPU_MAIR1_Attr5_Pos)                /*!< MPU MAIR1: Attr5 Mask */
+
+#define MPU_MAIR1_Attr4_Pos                 0U                                            /*!< MPU MAIR1: Attr4 Position */
+#define MPU_MAIR1_Attr4_Msk                (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/)            /*!< MPU MAIR1: Attr4 Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SAU     Security Attribution Unit (SAU)
+  \brief    Type definitions for the Security Attribution Unit (SAU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Security Attribution Unit (SAU).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SAU Control Register */
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x004 (R/ )  SAU Type Register */
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  SAU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  SAU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  SAU Region Limit Address Register */
+#else
+        uint32_t RESERVED0[3];
+#endif
+  __IOM uint32_t SFSR;                   /*!< Offset: 0x014 (R/W)  Secure Fault Status Register */
+  __IOM uint32_t SFAR;                   /*!< Offset: 0x018 (R/W)  Secure Fault Address Register */
+} SAU_Type;
+
+/* SAU Control Register Definitions */
+#define SAU_CTRL_ALLNS_Pos                  1U                                            /*!< SAU CTRL: ALLNS Position */
+#define SAU_CTRL_ALLNS_Msk                 (1UL << SAU_CTRL_ALLNS_Pos)                    /*!< SAU CTRL: ALLNS Mask */
+
+#define SAU_CTRL_ENABLE_Pos                 0U                                            /*!< SAU CTRL: ENABLE Position */
+#define SAU_CTRL_ENABLE_Msk                (1UL /*<< SAU_CTRL_ENABLE_Pos*/)               /*!< SAU CTRL: ENABLE Mask */
+
+/* SAU Type Register Definitions */
+#define SAU_TYPE_SREGION_Pos                0U                                            /*!< SAU TYPE: SREGION Position */
+#define SAU_TYPE_SREGION_Msk               (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/)           /*!< SAU TYPE: SREGION Mask */
+
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+/* SAU Region Number Register Definitions */
+#define SAU_RNR_REGION_Pos                  0U                                            /*!< SAU RNR: REGION Position */
+#define SAU_RNR_REGION_Msk                 (0xFFUL /*<< SAU_RNR_REGION_Pos*/)             /*!< SAU RNR: REGION Mask */
+
+/* SAU Region Base Address Register Definitions */
+#define SAU_RBAR_BADDR_Pos                  5U                                            /*!< SAU RBAR: BADDR Position */
+#define SAU_RBAR_BADDR_Msk                 (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos)            /*!< SAU RBAR: BADDR Mask */
+
+/* SAU Region Limit Address Register Definitions */
+#define SAU_RLAR_LADDR_Pos                  5U                                            /*!< SAU RLAR: LADDR Position */
+#define SAU_RLAR_LADDR_Msk                 (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos)            /*!< SAU RLAR: LADDR Mask */
+
+#define SAU_RLAR_NSC_Pos                    1U                                            /*!< SAU RLAR: NSC Position */
+#define SAU_RLAR_NSC_Msk                   (1UL << SAU_RLAR_NSC_Pos)                      /*!< SAU RLAR: NSC Mask */
+
+#define SAU_RLAR_ENABLE_Pos                 0U                                            /*!< SAU RLAR: ENABLE Position */
+#define SAU_RLAR_ENABLE_Msk                (1UL /*<< SAU_RLAR_ENABLE_Pos*/)               /*!< SAU RLAR: ENABLE Mask */
+
+#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */
+
+/* Secure Fault Status Register Definitions */
+#define SAU_SFSR_LSERR_Pos                  7U                                            /*!< SAU SFSR: LSERR Position */
+#define SAU_SFSR_LSERR_Msk                 (1UL << SAU_SFSR_LSERR_Pos)                    /*!< SAU SFSR: LSERR Mask */
+
+#define SAU_SFSR_SFARVALID_Pos              6U                                            /*!< SAU SFSR: SFARVALID Position */
+#define SAU_SFSR_SFARVALID_Msk             (1UL << SAU_SFSR_SFARVALID_Pos)                /*!< SAU SFSR: SFARVALID Mask */
+
+#define SAU_SFSR_LSPERR_Pos                 5U                                            /*!< SAU SFSR: LSPERR Position */
+#define SAU_SFSR_LSPERR_Msk                (1UL << SAU_SFSR_LSPERR_Pos)                   /*!< SAU SFSR: LSPERR Mask */
+
+#define SAU_SFSR_INVTRAN_Pos                4U                                            /*!< SAU SFSR: INVTRAN Position */
+#define SAU_SFSR_INVTRAN_Msk               (1UL << SAU_SFSR_INVTRAN_Pos)                  /*!< SAU SFSR: INVTRAN Mask */
+
+#define SAU_SFSR_AUVIOL_Pos                 3U                                            /*!< SAU SFSR: AUVIOL Position */
+#define SAU_SFSR_AUVIOL_Msk                (1UL << SAU_SFSR_AUVIOL_Pos)                   /*!< SAU SFSR: AUVIOL Mask */
+
+#define SAU_SFSR_INVER_Pos                  2U                                            /*!< SAU SFSR: INVER Position */
+#define SAU_SFSR_INVER_Msk                 (1UL << SAU_SFSR_INVER_Pos)                    /*!< SAU SFSR: INVER Mask */
+
+#define SAU_SFSR_INVIS_Pos                  1U                                            /*!< SAU SFSR: INVIS Position */
+#define SAU_SFSR_INVIS_Msk                 (1UL << SAU_SFSR_INVIS_Pos)                    /*!< SAU SFSR: INVIS Mask */
+
+#define SAU_SFSR_INVEP_Pos                  0U                                            /*!< SAU SFSR: INVEP Position */
+#define SAU_SFSR_INVEP_Msk                 (1UL /*<< SAU_SFSR_INVEP_Pos*/)                /*!< SAU SFSR: INVEP Mask */
+
+/*@} end of group CMSIS_SAU */
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_FPU     Floating Point Unit (FPU)
+  \brief    Type definitions for the Floating Point Unit (FPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t FPCCR;                  /*!< Offset: 0x004 (R/W)  Floating-Point Context Control Register */
+  __IOM uint32_t FPCAR;                  /*!< Offset: 0x008 (R/W)  Floating-Point Context Address Register */
+  __IOM uint32_t FPDSCR;                 /*!< Offset: 0x00C (R/W)  Floating-Point Default Status Control Register */
+  __IM  uint32_t MVFR0;                  /*!< Offset: 0x010 (R/ )  Media and FP Feature Register 0 */
+  __IM  uint32_t MVFR1;                  /*!< Offset: 0x014 (R/ )  Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos                31U                                            /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk                (1UL << FPU_FPCCR_ASPEN_Pos)                   /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos                30U                                            /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk                (1UL << FPU_FPCCR_LSPEN_Pos)                   /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_LSPENS_Pos               29U                                            /*!< FPCCR: LSPENS Position */
+#define FPU_FPCCR_LSPENS_Msk               (1UL << FPU_FPCCR_LSPENS_Pos)                  /*!< FPCCR: LSPENS bit Mask */
+
+#define FPU_FPCCR_CLRONRET_Pos             28U                                            /*!< FPCCR: CLRONRET Position */
+#define FPU_FPCCR_CLRONRET_Msk             (1UL << FPU_FPCCR_CLRONRET_Pos)                /*!< FPCCR: CLRONRET bit Mask */
+
+#define FPU_FPCCR_CLRONRETS_Pos            27U                                            /*!< FPCCR: CLRONRETS Position */
+#define FPU_FPCCR_CLRONRETS_Msk            (1UL << FPU_FPCCR_CLRONRETS_Pos)               /*!< FPCCR: CLRONRETS bit Mask */
+
+#define FPU_FPCCR_TS_Pos                   26U                                            /*!< FPCCR: TS Position */
+#define FPU_FPCCR_TS_Msk                   (1UL << FPU_FPCCR_TS_Pos)                      /*!< FPCCR: TS bit Mask */
+
+#define FPU_FPCCR_UFRDY_Pos                10U                                            /*!< FPCCR: UFRDY Position */
+#define FPU_FPCCR_UFRDY_Msk                (1UL << FPU_FPCCR_UFRDY_Pos)                   /*!< FPCCR: UFRDY bit Mask */
+
+#define FPU_FPCCR_SPLIMVIOL_Pos             9U                                            /*!< FPCCR: SPLIMVIOL Position */
+#define FPU_FPCCR_SPLIMVIOL_Msk            (1UL << FPU_FPCCR_SPLIMVIOL_Pos)               /*!< FPCCR: SPLIMVIOL bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos                8U                                            /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk               (1UL << FPU_FPCCR_MONRDY_Pos)                  /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_SFRDY_Pos                 7U                                            /*!< FPCCR: SFRDY Position */
+#define FPU_FPCCR_SFRDY_Msk                (1UL << FPU_FPCCR_SFRDY_Pos)                   /*!< FPCCR: SFRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos                 6U                                            /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk                (1UL << FPU_FPCCR_BFRDY_Pos)                   /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos                 5U                                            /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk                (1UL << FPU_FPCCR_MMRDY_Pos)                   /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos                 4U                                            /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk                (1UL << FPU_FPCCR_HFRDY_Pos)                   /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos                3U                                            /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk               (1UL << FPU_FPCCR_THREAD_Pos)                  /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_S_Pos                     2U                                            /*!< FPCCR: Security status of the FP context bit Position */
+#define FPU_FPCCR_S_Msk                    (1UL << FPU_FPCCR_S_Pos)                       /*!< FPCCR: Security status of the FP context bit Mask */
+
+#define FPU_FPCCR_USER_Pos                  1U                                            /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk                 (1UL << FPU_FPCCR_USER_Pos)                    /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos                0U                                            /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk               (1UL /*<< FPU_FPCCR_LSPACT_Pos*/)              /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos               3U                                            /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk              (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos)        /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos                 26U                                            /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk                 (1UL << FPU_FPDSCR_AHP_Pos)                    /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos                  25U                                            /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk                  (1UL << FPU_FPDSCR_DN_Pos)                     /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos                  24U                                            /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk                  (1UL << FPU_FPDSCR_FZ_Pos)                     /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos               22U                                            /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk               (3UL << FPU_FPDSCR_RMode_Pos)                  /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos    28U                                            /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk    (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos)     /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos        24U                                            /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk        (0xFUL << FPU_MVFR0_Short_vectors_Pos)         /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos          20U                                            /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk          (0xFUL << FPU_MVFR0_Square_root_Pos)           /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos               16U                                            /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk               (0xFUL << FPU_MVFR0_Divide_Pos)                /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos    12U                                            /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk    (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos)     /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos      8U                                            /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk     (0xFUL << FPU_MVFR0_Double_precision_Pos)      /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos      4U                                            /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk     (0xFUL << FPU_MVFR0_Single_precision_Pos)      /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos      0U                                            /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk     (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/)  /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos         28U                                            /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk         (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos)          /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos              24U                                            /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk              (0xFUL << FPU_MVFR1_FP_HPFP_Pos)               /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos            4U                                            /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk           (0xFUL << FPU_MVFR1_D_NaN_mode_Pos)            /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos              0U                                            /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk             (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/)          /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t DAUTHCTRL;              /*!< Offset: 0x014 (R/W)  Debug Authentication Control Register */
+  __IOM uint32_t DSCSR;                  /*!< Offset: 0x018 (R/W)  Debug Security Control and Status Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESTART_ST_Pos   26U                                            /*!< CoreDebug DHCSR: S_RESTART_ST Position */
+#define CoreDebug_DHCSR_S_RESTART_ST_Msk   (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos)      /*!< CoreDebug DHCSR: S_RESTART_ST Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5U                                            /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos         24U                                            /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19U                                            /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18U                                            /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17U                                            /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16U                                            /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9U                                            /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8U                                            /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7U                                            /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6U                                            /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5U                                            /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4U                                            /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/* Debug Authentication Control Register Definitions */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos  3U                                            /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos)    /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */
+
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos  2U                                            /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos)    /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */
+
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos   1U                                            /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk  (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos)     /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */
+
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos   0U                                            /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk  (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */
+
+/* Debug Security Control and Status Register Definitions */
+#define CoreDebug_DSCSR_CDS_Pos            16U                                            /*!< CoreDebug DSCSR: CDS Position */
+#define CoreDebug_DSCSR_CDS_Msk            (1UL << CoreDebug_DSCSR_CDS_Pos)               /*!< CoreDebug DSCSR: CDS Mask */
+
+#define CoreDebug_DSCSR_SBRSEL_Pos          1U                                            /*!< CoreDebug DSCSR: SBRSEL Position */
+#define CoreDebug_DSCSR_SBRSEL_Msk         (1UL << CoreDebug_DSCSR_SBRSEL_Pos)            /*!< CoreDebug DSCSR: SBRSEL Mask */
+
+#define CoreDebug_DSCSR_SBRSELEN_Pos        0U                                            /*!< CoreDebug DSCSR: SBRSELEN Position */
+#define CoreDebug_DSCSR_SBRSELEN_Msk       (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/)      /*!< CoreDebug DSCSR: SBRSELEN Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+  #define SCS_BASE            (0xE000E000UL)                             /*!< System Control Space Base Address */
+  #define ITM_BASE            (0xE0000000UL)                             /*!< ITM Base Address */
+  #define DWT_BASE            (0xE0001000UL)                             /*!< DWT Base Address */
+  #define TPI_BASE            (0xE0040000UL)                             /*!< TPI Base Address */
+  #define CoreDebug_BASE      (0xE000EDF0UL)                             /*!< Core Debug Base Address */
+  #define SysTick_BASE        (SCS_BASE +  0x0010UL)                     /*!< SysTick Base Address */
+  #define NVIC_BASE           (SCS_BASE +  0x0100UL)                     /*!< NVIC Base Address */
+  #define SCB_BASE            (SCS_BASE +  0x0D00UL)                     /*!< System Control Block Base Address */
+
+  #define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE         ) /*!< System control Register not in SCB */
+  #define SCB                 ((SCB_Type       *)     SCB_BASE         ) /*!< SCB configuration struct */
+  #define SysTick             ((SysTick_Type   *)     SysTick_BASE     ) /*!< SysTick configuration struct */
+  #define NVIC                ((NVIC_Type      *)     NVIC_BASE        ) /*!< NVIC configuration struct */
+  #define ITM                 ((ITM_Type       *)     ITM_BASE         ) /*!< ITM configuration struct */
+  #define DWT                 ((DWT_Type       *)     DWT_BASE         ) /*!< DWT configuration struct */
+  #define TPI                 ((TPI_Type       *)     TPI_BASE         ) /*!< TPI configuration struct */
+  #define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE   ) /*!< Core Debug configuration struct */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE          (SCS_BASE +  0x0D90UL)                     /*!< Memory Protection Unit */
+    #define MPU               ((MPU_Type       *)     MPU_BASE         ) /*!< Memory Protection Unit */
+  #endif
+
+  #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+    #define SAU_BASE          (SCS_BASE +  0x0DD0UL)                     /*!< Security Attribution Unit */
+    #define SAU               ((SAU_Type       *)     SAU_BASE         ) /*!< Security Attribution Unit */
+  #endif
+
+  #define FPU_BASE            (SCS_BASE +  0x0F30UL)                     /*!< Floating Point Unit */
+  #define FPU                 ((FPU_Type       *)     FPU_BASE         ) /*!< Floating Point Unit */
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+  #define SCS_BASE_NS         (0xE002E000UL)                             /*!< System Control Space Base Address (non-secure address space) */
+  #define CoreDebug_BASE_NS   (0xE002EDF0UL)                             /*!< Core Debug Base Address           (non-secure address space) */
+  #define SysTick_BASE_NS     (SCS_BASE_NS +  0x0010UL)                  /*!< SysTick Base Address              (non-secure address space) */
+  #define NVIC_BASE_NS        (SCS_BASE_NS +  0x0100UL)                  /*!< NVIC Base Address                 (non-secure address space) */
+  #define SCB_BASE_NS         (SCS_BASE_NS +  0x0D00UL)                  /*!< System Control Block Base Address (non-secure address space) */
+
+  #define SCnSCB_NS           ((SCnSCB_Type    *)     SCS_BASE_NS      ) /*!< System control Register not in SCB(non-secure address space) */
+  #define SCB_NS              ((SCB_Type       *)     SCB_BASE_NS      ) /*!< SCB configuration struct          (non-secure address space) */
+  #define SysTick_NS          ((SysTick_Type   *)     SysTick_BASE_NS  ) /*!< SysTick configuration struct      (non-secure address space) */
+  #define NVIC_NS             ((NVIC_Type      *)     NVIC_BASE_NS     ) /*!< NVIC configuration struct         (non-secure address space) */
+  #define CoreDebug_NS        ((CoreDebug_Type *)     CoreDebug_BASE_NS) /*!< Core Debug configuration struct   (non-secure address space) */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE_NS       (SCS_BASE_NS +  0x0D90UL)                  /*!< Memory Protection Unit            (non-secure address space) */
+    #define MPU_NS            ((MPU_Type       *)     MPU_BASE_NS      ) /*!< Memory Protection Unit            (non-secure address space) */
+  #endif
+
+  #define FPU_BASE_NS         (SCS_BASE_NS +  0x0F30UL)                  /*!< Floating Point Unit               (non-secure address space) */
+  #define FPU_NS              ((FPU_Type       *)     FPU_BASE_NS      ) /*!< Floating Point Unit               (non-secure address space) */
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* Special LR values for Secure/Non-Secure call handling and exception handling                                               */
+
+/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS                   */ 
+#define FNC_RETURN                 (0xFEFFFFFFUL)     /* bit [0] ignored when processing a branch                             */
+
+/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */
+#define EXC_RETURN_PREFIX          (0xFF000000UL)     /* bits [31:24] set to indicate an EXC_RETURN value                     */
+#define EXC_RETURN_S               (0x00000040UL)     /* bit [6] stack used to push registers: 0=Non-secure 1=Secure          */
+#define EXC_RETURN_DCRS            (0x00000020UL)     /* bit [5] stacking rules for called registers: 0=skipped 1=saved       */
+#define EXC_RETURN_FTYPE           (0x00000010UL)     /* bit [4] allocate stack for floating-point context: 0=done 1=skipped  */
+#define EXC_RETURN_MODE            (0x00000008UL)     /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode      */
+#define EXC_RETURN_SPSEL           (0x00000002UL)     /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP           */
+#define EXC_RETURN_ES              (0x00000001UL)     /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */
+
+/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking                            */
+#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)  /* Value for processors with floating-point extension:                  */
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125AUL)     /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE                   */
+#else 
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125BUL)     /* Value for processors without floating-point extension                */
+#endif
+
+
+/**
+  \brief   Set Priority Grouping
+  \details Sets the priority grouping field using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << 8U)                      );              /* Insert write key and priority group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping
+  \details Reads the priority grouping field from the NVIC Interrupt Controller.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Get Interrupt Target State
+  \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+  \return             1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Target State
+  \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |=  ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Clear Interrupt Target State
+  \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IPR[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Set Priority Grouping (non-secure)
+  \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB_NS->AIRCR;                                                /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos)  );              /* Insert write key and priority group */
+  SCB_NS->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping (non-secure)
+  \details Reads the priority grouping field from the non-secure NVIC when in secure state.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void)
+{
+  return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt (non-secure)
+  \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status (non-secure)
+  \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt (non-secure)
+  \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt (non-secure)
+  \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt (non-secure)
+  \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt (non-secure)
+  \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt (non-secure)
+  \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority (non-secure)
+  \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every non-secure processor exception.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->IPR[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority (non-secure)
+  \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+#endif /*  defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv8.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+  uint32_t mvfr0;
+
+  mvfr0 = FPU->MVFR0;
+  if      ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U)
+  {
+    return 2U;           /* Double + Single precision FPU */
+  }
+  else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U)
+  {
+    return 1U;           /* Single precision FPU */
+  }
+  else
+  {
+    return 0U;           /* No FPU */
+  }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##########################   SAU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SAUFunctions SAU Functions
+  \brief    Functions that configure the SAU.
+  @{
+ */
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+
+/**
+  \brief   Enable SAU
+  \details Enables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Enable(void)
+{
+    SAU->CTRL |=  (SAU_CTRL_ENABLE_Msk);
+}
+
+
+
+/**
+  \brief   Disable SAU
+  \details Disables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Disable(void)
+{
+    SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk);
+}
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_SAUFunctions */
+
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   System Tick Configuration (non-secure)
+  \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>TZ_SysTick_Config_NS</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                         /* Reload value impossible */
+  }
+
+  SysTick_NS->LOAD  = (uint32_t)(ticks - 1UL);                            /* set reload register */
+  TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick_NS->VAL   = 0UL;                                                /* Load the SysTick Counter Value */
+  SysTick_NS->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                      SysTick_CTRL_TICKINT_Msk   |
+                      SysTick_CTRL_ENABLE_Msk;                            /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                           /* Function successful */
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_core_DebugFunctions ITM Functions
+  \brief    Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                              /*!< External variable to receive characters. */
+#define                 ITM_RXBUFFER_EMPTY  ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+  \brief   ITM Send Character
+  \details Transmits a character via the ITM channel 0, and
+           \li Just returns when no debugger is connected that has booked the output.
+           \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+  \param [in]     ch  Character to transmit.
+  \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0U].u32 == 0UL)
+    {
+      __NOP();
+    }
+    ITM->PORT[0U].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Receive Character
+  \details Inputs a character via the external variable \ref ITM_RxBuffer.
+  \return             Received character.
+  \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+  {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Check Character
+  \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+  \return          0  No character available.
+  \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+  {
+    return (0);                              /* no character available */
+  }
+  else
+  {
+    return (1);                              /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM33_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

Soft/STM32/Controle/Drivers/CMSIS/Include/core_cm4.h

@@ -1,40 +1,30 @@
 /**************************************************************************//**
  * @file     core_cm4.h
  * @brief    CMSIS Cortex-M4 Core Peripheral Access Layer Header File
- * @version  V4.30
- * @date     20. October 2015
+ * @version  V5.0.8
+ * @date     04. June 2018
  ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
-   All rights reserved.
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-   - Neither the name of ARM nor the names of its contributors may be used
-     to endorse or promote products derived from this software without
-     specific prior written permission.
-   *
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-   ---------------------------------------------------------------------------*/
-
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
 
 #if   defined ( __ICCARM__ )
- #pragma system_include         /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
   #pragma clang system_header   /* treat file as system include file */
 #endif
 
@@ -70,60 +60,22 @@
   @{
  */
 
-/*  CMSIS CM4 definitions */
-#define __CM4_CMSIS_VERSION_MAIN  (0x04U)                                      /*!< [31:16] CMSIS HAL main version */
-#define __CM4_CMSIS_VERSION_SUB   (0x1EU)                                      /*!< [15:0]  CMSIS HAL sub version */
-#define __CM4_CMSIS_VERSION       ((__CM4_CMSIS_VERSION_MAIN << 16U) | \
-                                    __CM4_CMSIS_VERSION_SUB           )        /*!< CMSIS HAL version number */
-
-#define __CORTEX_M                (0x04U)                                      /*!< Cortex-M Core */
-
-
-#if   defined ( __CC_ARM )
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-
-#elif defined ( __GNUC__ )
-  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __ICCARM__ )
-  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __TMS470__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler */
-  #define __STATIC_INLINE  static inline
+#include "cmsis_version.h"
 
-#elif defined ( __TASKING__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __CSMC__ )
-  #define __packed
-  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler */
-  #define __INLINE         inline                                    /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
-  #define __STATIC_INLINE  static inline
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION       ((__CM4_CMSIS_VERSION_MAIN << 16U) | \
+                                    __CM4_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
 
-#else
-  #error Unknown compiler
-#endif
+#define __CORTEX_M                (4U)                                   /*!< Cortex-M Core */
 
 /** __FPU_USED indicates whether an FPU is used or not.
     For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
 */
 #if defined ( __CC_ARM )
   #if defined __TARGET_FPU_VFP
-    #if (__FPU_PRESENT == 1U)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
       #define __FPU_USED       1U
     #else
       #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
@@ -133,9 +85,9 @@
     #define __FPU_USED         0U
   #endif
 
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
   #if defined __ARM_PCS_VFP
-    #if (__FPU_PRESENT == 1)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
       #define __FPU_USED       1U
     #else
       #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
@@ -147,7 +99,7 @@
 
 #elif defined ( __GNUC__ )
   #if defined (__VFP_FP__) && !defined(__SOFTFP__)
-    #if (__FPU_PRESENT == 1U)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
       #define __FPU_USED       1U
     #else
       #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
@@ -159,7 +111,7 @@
 
 #elif defined ( __ICCARM__ )
   #if defined __ARMVFP__
-    #if (__FPU_PRESENT == 1U)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
       #define __FPU_USED       1U
     #else
       #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
@@ -169,9 +121,9 @@
     #define __FPU_USED         0U
   #endif
 
-#elif defined ( __TMS470__ )
+#elif defined ( __TI_ARM__ )
   #if defined __TI_VFP_SUPPORT__
-    #if (__FPU_PRESENT == 1U)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
       #define __FPU_USED       1U
     #else
       #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
@@ -183,7 +135,7 @@
 
 #elif defined ( __TASKING__ )
   #if defined __FPU_VFP__
-    #if (__FPU_PRESENT == 1U)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
       #define __FPU_USED       1U
     #else
       #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
@@ -195,7 +147,7 @@
 
 #elif defined ( __CSMC__ )
   #if ( __CSMC__ & 0x400U)
-    #if (__FPU_PRESENT == 1U)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
       #define __FPU_USED       1U
     #else
       #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
@@ -207,9 +159,8 @@
 
 #endif
 
-#include "core_cmInstr.h"                /* Core Instruction Access */
-#include "core_cmFunc.h"                 /* Core Function Access */
-#include "core_cmSimd.h"                 /* Compiler specific SIMD Intrinsics */
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
 
 #ifdef __cplusplus
 }
@@ -244,7 +195,7 @@
   #endif
 
   #ifndef __NVIC_PRIO_BITS
-    #define __NVIC_PRIO_BITS          4U
+    #define __NVIC_PRIO_BITS          3U
     #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
   #endif
 
@@ -367,11 +318,12 @@ typedef union
   struct
   {
     uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
-    uint32_t _reserved0:7;               /*!< bit:  9..15  Reserved */
+    uint32_t _reserved0:1;               /*!< bit:      9  Reserved */
+    uint32_t ICI_IT_1:6;                 /*!< bit: 10..15  ICI/IT part 1 */
     uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
     uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved */
-    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
-    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0) */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit */
+    uint32_t ICI_IT_2:2;                 /*!< bit: 25..26  ICI/IT part 2 */
     uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
     uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
     uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
@@ -397,8 +349,8 @@ typedef union
 #define xPSR_Q_Pos                         27U                                            /*!< xPSR: Q Position */
 #define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
 
-#define xPSR_IT_Pos                        25U                                            /*!< xPSR: IT Position */
-#define xPSR_IT_Msk                        (3UL << xPSR_IT_Pos)                           /*!< xPSR: IT Mask */
+#define xPSR_ICI_IT_2_Pos                  25U                                            /*!< xPSR: ICI/IT part 2 Position */
+#define xPSR_ICI_IT_2_Msk                  (3UL << xPSR_ICI_IT_2_Pos)                     /*!< xPSR: ICI/IT part 2 Mask */
 
 #define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
 #define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
@@ -406,6 +358,9 @@ typedef union
 #define xPSR_GE_Pos                        16U                                            /*!< xPSR: GE Position */
 #define xPSR_GE_Msk                        (0xFUL << xPSR_GE_Pos)                         /*!< xPSR: GE Mask */
 
+#define xPSR_ICI_IT_1_Pos                  10U                                            /*!< xPSR: ICI/IT part 1 Position */
+#define xPSR_ICI_IT_1_Msk                  (0x3FUL << xPSR_ICI_IT_1_Pos)                  /*!< xPSR: ICI/IT part 1 Mask */
+
 #define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
 #define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
 
@@ -662,6 +617,66 @@ typedef struct
 #define SCB_CFSR_MEMFAULTSR_Pos             0U                                            /*!< SCB CFSR: Memory Manage Fault Status Register Position */
 #define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
 
+/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_MMARVALID_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 7U)               /*!< SCB CFSR (MMFSR): MMARVALID Position */
+#define SCB_CFSR_MMARVALID_Msk             (1UL << SCB_CFSR_MMARVALID_Pos)                /*!< SCB CFSR (MMFSR): MMARVALID Mask */
+
+#define SCB_CFSR_MLSPERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 5U)               /*!< SCB CFSR (MMFSR): MLSPERR Position */
+#define SCB_CFSR_MLSPERR_Msk               (1UL << SCB_CFSR_MLSPERR_Pos)                  /*!< SCB CFSR (MMFSR): MLSPERR Mask */
+
+#define SCB_CFSR_MSTKERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 4U)               /*!< SCB CFSR (MMFSR): MSTKERR Position */
+#define SCB_CFSR_MSTKERR_Msk               (1UL << SCB_CFSR_MSTKERR_Pos)                  /*!< SCB CFSR (MMFSR): MSTKERR Mask */
+
+#define SCB_CFSR_MUNSTKERR_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 3U)               /*!< SCB CFSR (MMFSR): MUNSTKERR Position */
+#define SCB_CFSR_MUNSTKERR_Msk             (1UL << SCB_CFSR_MUNSTKERR_Pos)                /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */
+
+#define SCB_CFSR_DACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 1U)               /*!< SCB CFSR (MMFSR): DACCVIOL Position */
+#define SCB_CFSR_DACCVIOL_Msk              (1UL << SCB_CFSR_DACCVIOL_Pos)                 /*!< SCB CFSR (MMFSR): DACCVIOL Mask */
+
+#define SCB_CFSR_IACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 0U)               /*!< SCB CFSR (MMFSR): IACCVIOL Position */
+#define SCB_CFSR_IACCVIOL_Msk              (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/)             /*!< SCB CFSR (MMFSR): IACCVIOL Mask */
+
+/* BusFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_BFARVALID_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 7U)                  /*!< SCB CFSR (BFSR): BFARVALID Position */
+#define SCB_CFSR_BFARVALID_Msk            (1UL << SCB_CFSR_BFARVALID_Pos)                 /*!< SCB CFSR (BFSR): BFARVALID Mask */
+
+#define SCB_CFSR_LSPERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 5U)                  /*!< SCB CFSR (BFSR): LSPERR Position */
+#define SCB_CFSR_LSPERR_Msk               (1UL << SCB_CFSR_LSPERR_Pos)                    /*!< SCB CFSR (BFSR): LSPERR Mask */
+
+#define SCB_CFSR_STKERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 4U)                  /*!< SCB CFSR (BFSR): STKERR Position */
+#define SCB_CFSR_STKERR_Msk               (1UL << SCB_CFSR_STKERR_Pos)                    /*!< SCB CFSR (BFSR): STKERR Mask */
+
+#define SCB_CFSR_UNSTKERR_Pos             (SCB_CFSR_BUSFAULTSR_Pos + 3U)                  /*!< SCB CFSR (BFSR): UNSTKERR Position */
+#define SCB_CFSR_UNSTKERR_Msk             (1UL << SCB_CFSR_UNSTKERR_Pos)                  /*!< SCB CFSR (BFSR): UNSTKERR Mask */
+
+#define SCB_CFSR_IMPRECISERR_Pos          (SCB_CFSR_BUSFAULTSR_Pos + 2U)                  /*!< SCB CFSR (BFSR): IMPRECISERR Position */
+#define SCB_CFSR_IMPRECISERR_Msk          (1UL << SCB_CFSR_IMPRECISERR_Pos)               /*!< SCB CFSR (BFSR): IMPRECISERR Mask */
+
+#define SCB_CFSR_PRECISERR_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 1U)                  /*!< SCB CFSR (BFSR): PRECISERR Position */
+#define SCB_CFSR_PRECISERR_Msk            (1UL << SCB_CFSR_PRECISERR_Pos)                 /*!< SCB CFSR (BFSR): PRECISERR Mask */
+
+#define SCB_CFSR_IBUSERR_Pos              (SCB_CFSR_BUSFAULTSR_Pos + 0U)                  /*!< SCB CFSR (BFSR): IBUSERR Position */
+#define SCB_CFSR_IBUSERR_Msk              (1UL << SCB_CFSR_IBUSERR_Pos)                   /*!< SCB CFSR (BFSR): IBUSERR Mask */
+
+/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_DIVBYZERO_Pos            (SCB_CFSR_USGFAULTSR_Pos + 9U)                  /*!< SCB CFSR (UFSR): DIVBYZERO Position */
+#define SCB_CFSR_DIVBYZERO_Msk            (1UL << SCB_CFSR_DIVBYZERO_Pos)                 /*!< SCB CFSR (UFSR): DIVBYZERO Mask */
+
+#define SCB_CFSR_UNALIGNED_Pos            (SCB_CFSR_USGFAULTSR_Pos + 8U)                  /*!< SCB CFSR (UFSR): UNALIGNED Position */
+#define SCB_CFSR_UNALIGNED_Msk            (1UL << SCB_CFSR_UNALIGNED_Pos)                 /*!< SCB CFSR (UFSR): UNALIGNED Mask */
+
+#define SCB_CFSR_NOCP_Pos                 (SCB_CFSR_USGFAULTSR_Pos + 3U)                  /*!< SCB CFSR (UFSR): NOCP Position */
+#define SCB_CFSR_NOCP_Msk                 (1UL << SCB_CFSR_NOCP_Pos)                      /*!< SCB CFSR (UFSR): NOCP Mask */
+
+#define SCB_CFSR_INVPC_Pos                (SCB_CFSR_USGFAULTSR_Pos + 2U)                  /*!< SCB CFSR (UFSR): INVPC Position */
+#define SCB_CFSR_INVPC_Msk                (1UL << SCB_CFSR_INVPC_Pos)                     /*!< SCB CFSR (UFSR): INVPC Mask */
+
+#define SCB_CFSR_INVSTATE_Pos             (SCB_CFSR_USGFAULTSR_Pos + 1U)                  /*!< SCB CFSR (UFSR): INVSTATE Position */
+#define SCB_CFSR_INVSTATE_Msk             (1UL << SCB_CFSR_INVSTATE_Pos)                  /*!< SCB CFSR (UFSR): INVSTATE Mask */
+
+#define SCB_CFSR_UNDEFINSTR_Pos           (SCB_CFSR_USGFAULTSR_Pos + 0U)                  /*!< SCB CFSR (UFSR): UNDEFINSTR Position */
+#define SCB_CFSR_UNDEFINSTR_Msk           (1UL << SCB_CFSR_UNDEFINSTR_Pos)                /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */
+
 /* SCB Hard Fault Status Register Definitions */
 #define SCB_HFSR_DEBUGEVT_Pos              31U                                            /*!< SCB HFSR: DEBUGEVT Position */
 #define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
@@ -831,7 +846,7 @@ typedef struct
 
 /* ITM Trace Privilege Register Definitions */
 #define ITM_TPR_PRIVMASK_Pos                0U                                            /*!< ITM TPR: PRIVMASK Position */
-#define ITM_TPR_PRIVMASK_Msk               (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/)            /*!< ITM TPR: PRIVMASK Mask */
+#define ITM_TPR_PRIVMASK_Msk               (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/)     /*!< ITM TPR: PRIVMASK Mask */
 
 /* ITM Trace Control Register Definitions */
 #define ITM_TCR_BUSY_Pos                   23U                                            /*!< ITM TCR: BUSY Position */
@@ -1045,7 +1060,7 @@ typedef struct
  */
 typedef struct
 {
-  __IOM uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
   __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
         uint32_t RESERVED0[2U];
   __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
@@ -1056,7 +1071,7 @@ typedef struct
   __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
   __IM  uint32_t FSCR;                   /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
         uint32_t RESERVED3[759U];
-  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER */
+  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER Register */
   __IM  uint32_t FIFO0;                  /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
   __IM  uint32_t ITATBCTR2;              /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
         uint32_t RESERVED4[1U];
@@ -1126,8 +1141,11 @@ typedef struct
 #define TPI_FIFO0_ETM0_Msk                 (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/)          /*!< TPI FIFO0: ETM0 Mask */
 
 /* TPI ITATBCTR2 Register Definitions */
-#define TPI_ITATBCTR2_ATREADY_Pos           0U                                         /*!< TPI ITATBCTR2: ATREADY Position */
-#define TPI_ITATBCTR2_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/)    /*!< TPI ITATBCTR2: ATREADY Mask */
+#define TPI_ITATBCTR2_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY2 Position */
+#define TPI_ITATBCTR2_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/)   /*!< TPI ITATBCTR2: ATREADY2 Mask */
+
+#define TPI_ITATBCTR2_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY1 Position */
+#define TPI_ITATBCTR2_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/)   /*!< TPI ITATBCTR2: ATREADY1 Mask */
 
 /* TPI Integration ITM Data Register Definitions (FIFO1) */
 #define TPI_FIFO1_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO1: ITM_ATVALID Position */
@@ -1152,12 +1170,15 @@ typedef struct
 #define TPI_FIFO1_ITM0_Msk                 (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/)          /*!< TPI FIFO1: ITM0 Mask */
 
 /* TPI ITATBCTR0 Register Definitions */
-#define TPI_ITATBCTR0_ATREADY_Pos           0U                                         /*!< TPI ITATBCTR0: ATREADY Position */
-#define TPI_ITATBCTR0_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/)    /*!< TPI ITATBCTR0: ATREADY Mask */
+#define TPI_ITATBCTR0_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY2 Position */
+#define TPI_ITATBCTR0_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/)   /*!< TPI ITATBCTR0: ATREADY2 Mask */
+
+#define TPI_ITATBCTR0_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY1 Position */
+#define TPI_ITATBCTR0_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/)   /*!< TPI ITATBCTR0: ATREADY1 Mask */
 
 /* TPI Integration Mode Control Register Definitions */
 #define TPI_ITCTRL_Mode_Pos                 0U                                         /*!< TPI ITCTRL: Mode Position */
-#define TPI_ITCTRL_Mode_Msk                (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+#define TPI_ITCTRL_Mode_Msk                (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
 
 /* TPI DEVID Register Definitions */
 #define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
@@ -1179,16 +1200,16 @@ typedef struct
 #define TPI_DEVID_NrTraceInput_Msk         (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
 
 /* TPI DEVTYPE Register Definitions */
-#define TPI_DEVTYPE_MajorType_Pos           4U                                         /*!< TPI DEVTYPE: MajorType Position */
-#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
-
-#define TPI_DEVTYPE_SubType_Pos             0U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
 #define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
 
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
 /*@}*/ /* end of group CMSIS_TPI */
 
 
-#if (__MPU_PRESENT == 1U)
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
 /**
   \ingroup  CMSIS_core_register
   \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
@@ -1214,6 +1235,8 @@ typedef struct
   __IOM uint32_t RASR_A3;                /*!< Offset: 0x028 (R/W)  MPU Alias 3 Region Attribute and Size Register */
 } MPU_Type;
 
+#define MPU_TYPE_RALIASES                  4U
+
 /* MPU Type Register Definitions */
 #define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
 #define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
@@ -1280,10 +1303,9 @@ typedef struct
 #define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
 
 /*@} end of group CMSIS_MPU */
-#endif
+#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */
 
 
-#if (__FPU_PRESENT == 1U)
 /**
   \ingroup  CMSIS_core_register
   \defgroup CMSIS_FPU     Floating Point Unit (FPU)
@@ -1388,7 +1410,6 @@ typedef struct
 #define FPU_MVFR1_FtZ_mode_Msk             (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/)          /*!< MVFR1: FtZ mode bits Mask */
 
 /*@} end of group CMSIS_FPU */
-#endif
 
 
 /**
@@ -1506,18 +1527,18 @@ typedef struct
 /**
   \brief   Mask and shift a bit field value for use in a register bit range.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of the bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted value.
 */
-#define _VAL2FLD(field, value)    ((value << field ## _Pos) & field ## _Msk)
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
 
 /**
   \brief     Mask and shift a register value to extract a bit filed value.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of register.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted bit field value.
 */
-#define _FLD2VAL(field, value)    ((value & field ## _Msk) >> field ## _Pos)
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
 
 /*@} end of group CMSIS_core_bitfield */
 
@@ -1529,7 +1550,7 @@ typedef struct
   @{
  */
 
-/* Memory mapping of Cortex-M4 Hardware */
+/* Memory mapping of Core Hardware */
 #define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
 #define ITM_BASE            (0xE0000000UL)                            /*!< ITM Base Address */
 #define DWT_BASE            (0xE0001000UL)                            /*!< DWT Base Address */
@@ -1548,15 +1569,13 @@ typedef struct
 #define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct */
 #define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE)   /*!< Core Debug configuration struct */
 
-#if (__MPU_PRESENT == 1U)
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
   #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
   #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
 #endif
 
-#if (__FPU_PRESENT == 1U)
-  #define FPU_BASE          (SCS_BASE +  0x0F30UL)                    /*!< Floating Point Unit */
-  #define FPU               ((FPU_Type       *)     FPU_BASE      )   /*!< Floating Point Unit */
-#endif
+#define FPU_BASE            (SCS_BASE +  0x0F30UL)                    /*!< Floating Point Unit */
+#define FPU                 ((FPU_Type       *)     FPU_BASE      )   /*!< Floating Point Unit */
 
 /*@} */
 
@@ -1584,6 +1603,48 @@ typedef struct
   @{
  */
 
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+   #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+#define EXC_RETURN_HANDLER_FPU     (0xFFFFFFE1UL)     /* return to Handler mode, uses MSP after return, restore floating-point state */
+#define EXC_RETURN_THREAD_MSP_FPU  (0xFFFFFFE9UL)     /* return to Thread mode, uses MSP after return, restore floating-point state  */
+#define EXC_RETURN_THREAD_PSP_FPU  (0xFFFFFFEDUL)     /* return to Thread mode, uses PSP after return, restore floating-point state  */
+
+
 /**
   \brief   Set Priority Grouping
   \details Sets the priority grouping field using the required unlock sequence.
@@ -1593,7 +1654,7 @@ typedef struct
            priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
   \param [in]      PriorityGroup  Priority grouping field.
  */
-__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
 {
   uint32_t reg_value;
   uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
@@ -1602,7 +1663,7 @@ __STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
   reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
   reg_value  =  (reg_value                                   |
                 ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
-                (PriorityGroupTmp << 8U)                      );              /* Insert write key and priorty group */
+                (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos)  );              /* Insert write key and priority group */
   SCB->AIRCR =  reg_value;
 }
 
@@ -1612,121 +1673,178 @@ __STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
   \details Reads the priority grouping field from the NVIC Interrupt Controller.
   \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
  */
-__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
 {
   return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
 }
 
 
 /**
-  \brief   Enable External Interrupt
-  \details Enables a device-specific interrupt in the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
 {
-  NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
-  \brief   Disable External Interrupt
-  \details Disables a device-specific interrupt in the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
 {
-  NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
 }
 
 
 /**
   \brief   Get Pending Interrupt
-  \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
-  \param [in]      IRQn  Interrupt number.
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
   \return             0  Interrupt status is not pending.
   \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
 {
-  return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
 }
 
 
 /**
   \brief   Set Pending Interrupt
-  \details Sets the pending bit of an external interrupt.
-  \param [in]      IRQn  Interrupt number. Value cannot be negative.
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
 {
-  NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
   \brief   Clear Pending Interrupt
-  \details Clears the pending bit of an external interrupt.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
 {
-  NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
   \brief   Get Active Interrupt
-  \details Reads the active register in NVIC and returns the active bit.
-  \param [in]      IRQn  Interrupt number.
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
   \return             0  Interrupt status is not active.
   \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
 {
-  return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
 }
 
 
 /**
   \brief   Set Interrupt Priority
-  \details Sets the priority of an interrupt.
-  \note    The priority cannot be set for every core interrupt.
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
   \param [in]      IRQn  Interrupt number.
   \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
  */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
 {
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
   {
-    SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+    NVIC->IP[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
   }
   else
   {
-    NVIC->IP[((uint32_t)(int32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+    SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
   }
 }
 
 
 /**
   \brief   Get Interrupt Priority
-  \details Reads the priority of an interrupt.
-           The interrupt number can be positive to specify an external (device specific) interrupt,
-           or negative to specify an internal (core) interrupt.
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
   \param [in]   IRQn  Interrupt number.
   \return             Interrupt Priority.
                       Value is aligned automatically to the implemented priority bits of the microcontroller.
  */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
 {
 
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
   {
-    return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+    return(((uint32_t)NVIC->IP[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
   }
   else
   {
-    return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+    return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
   }
 }
 
@@ -1783,11 +1901,42 @@ __STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGr
 }
 
 
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
 /**
   \brief   System Reset
   \details Initiates a system reset request to reset the MCU.
  */
-__STATIC_INLINE void NVIC_SystemReset(void)
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
 {
   __DSB();                                                          /* Ensure all outstanding memory accesses included
                                                                        buffered write are completed before reset */
@@ -1804,6 +1953,49 @@ __STATIC_INLINE void NVIC_SystemReset(void)
 
 /*@} end of CMSIS_Core_NVICFunctions */
 
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv7.h"
+
+#endif
+
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+  uint32_t mvfr0;
+
+  mvfr0 = FPU->MVFR0;
+  if      ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U)
+  {
+    return 1U;           /* Single precision FPU */
+  }
+  else
+  {
+    return 0U;           /* No FPU */
+  }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
 
 
 /* ##################################    SysTick function  ############################################ */
@@ -1814,7 +2006,7 @@ __STATIC_INLINE void NVIC_SystemReset(void)
   @{
  */
 
-#if (__Vendor_SysTickConfig == 0U)
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
 
 /**
   \brief   System Tick Configuration
@@ -1857,8 +2049,8 @@ __STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
   @{
  */
 
-extern volatile int32_t ITM_RxBuffer;                    /*!< External variable to receive characters. */
-#define                 ITM_RXBUFFER_EMPTY   0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+extern volatile int32_t ITM_RxBuffer;                              /*!< External variable to receive characters. */
+#define                 ITM_RXBUFFER_EMPTY  ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
 
 
 /**

Soft/STM32/Controle/Drivers/CMSIS/Include/core_cmFunc.h

@@ -1,87 +0,0 @@
-/**************************************************************************//**
- * @file     core_cmFunc.h
- * @brief    CMSIS Cortex-M Core Function Access Header File
- * @version  V4.30
- * @date     20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
-   All rights reserved.
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-   - Neither the name of ARM nor the names of its contributors may be used
-     to endorse or promote products derived from this software without
-     specific prior written permission.
-   *
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-   ---------------------------------------------------------------------------*/
-
-
-#if   defined ( __ICCARM__ )
- #pragma system_include         /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-  #pragma clang system_header   /* treat file as system include file */
-#endif
-
-#ifndef __CORE_CMFUNC_H
-#define __CORE_CMFUNC_H
-
-
-/* ###########################  Core Function Access  ########################### */
-/** \ingroup  CMSIS_Core_FunctionInterface
-    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
-  @{
-*/
-
-/*------------------ RealView Compiler -----------------*/
-#if   defined ( __CC_ARM )
-  #include "cmsis_armcc.h"
-
-/*------------------ ARM Compiler V6 -------------------*/
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-  #include "cmsis_armcc_V6.h"
-
-/*------------------ GNU Compiler ----------------------*/
-#elif defined ( __GNUC__ )
-  #include "cmsis_gcc.h"
-
-/*------------------ ICC Compiler ----------------------*/
-#elif defined ( __ICCARM__ )
-  #include <cmsis_iar.h>
-
-/*------------------ TI CCS Compiler -------------------*/
-#elif defined ( __TMS470__ )
-  #include <cmsis_ccs.h>
-
-/*------------------ TASKING Compiler ------------------*/
-#elif defined ( __TASKING__ )
-  /*
-   * The CMSIS functions have been implemented as intrinsics in the compiler.
-   * Please use "carm -?i" to get an up to date list of all intrinsics,
-   * Including the CMSIS ones.
-   */
-
-/*------------------ COSMIC Compiler -------------------*/
-#elif defined ( __CSMC__ )
-  #include <cmsis_csm.h>
-
-#endif
-
-/*@} end of CMSIS_Core_RegAccFunctions */
-
-#endif /* __CORE_CMFUNC_H */

Soft/STM32/Controle/Drivers/CMSIS/Include/core_cmInstr.h

@@ -1,87 +0,0 @@
-/**************************************************************************//**
- * @file     core_cmInstr.h
- * @brief    CMSIS Cortex-M Core Instruction Access Header File
- * @version  V4.30
- * @date     20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
-   All rights reserved.
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-   - Neither the name of ARM nor the names of its contributors may be used
-     to endorse or promote products derived from this software without
-     specific prior written permission.
-   *
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-   ---------------------------------------------------------------------------*/
-
-
-#if   defined ( __ICCARM__ )
- #pragma system_include         /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-  #pragma clang system_header   /* treat file as system include file */
-#endif
-
-#ifndef __CORE_CMINSTR_H
-#define __CORE_CMINSTR_H
-
-
-/* ##########################  Core Instruction Access  ######################### */
-/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
-  Access to dedicated instructions
-  @{
-*/
-
-/*------------------ RealView Compiler -----------------*/
-#if   defined ( __CC_ARM )
-  #include "cmsis_armcc.h"
-
-/*------------------ ARM Compiler V6 -------------------*/
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-  #include "cmsis_armcc_V6.h"
-
-/*------------------ GNU Compiler ----------------------*/
-#elif defined ( __GNUC__ )
-  #include "cmsis_gcc.h"
-
-/*------------------ ICC Compiler ----------------------*/
-#elif defined ( __ICCARM__ )
-  #include <cmsis_iar.h>
-
-/*------------------ TI CCS Compiler -------------------*/
-#elif defined ( __TMS470__ )
-  #include <cmsis_ccs.h>
-
-/*------------------ TASKING Compiler ------------------*/
-#elif defined ( __TASKING__ )
-  /*
-   * The CMSIS functions have been implemented as intrinsics in the compiler.
-   * Please use "carm -?i" to get an up to date list of all intrinsics,
-   * Including the CMSIS ones.
-   */
-
-/*------------------ COSMIC Compiler -------------------*/
-#elif defined ( __CSMC__ )
-  #include <cmsis_csm.h>
-
-#endif
-
-/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
-
-#endif /* __CORE_CMINSTR_H */

Soft/STM32/Controle/Drivers/CMSIS/Include/core_cmSimd.h

@@ -1,96 +0,0 @@
-/**************************************************************************//**
- * @file     core_cmSimd.h
- * @brief    CMSIS Cortex-M SIMD Header File
- * @version  V4.30
- * @date     20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
-   All rights reserved.
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-   - Neither the name of ARM nor the names of its contributors may be used
-     to endorse or promote products derived from this software without
-     specific prior written permission.
-   *
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-   ---------------------------------------------------------------------------*/
-
-
-#if   defined ( __ICCARM__ )
- #pragma system_include         /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-  #pragma clang system_header   /* treat file as system include file */
-#endif
-
-#ifndef __CORE_CMSIMD_H
-#define __CORE_CMSIMD_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-
-/* ###################  Compiler specific Intrinsics  ########################### */
-/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
-  Access to dedicated SIMD instructions
-  @{
-*/
-
-/*------------------ RealView Compiler -----------------*/
-#if   defined ( __CC_ARM )
-  #include "cmsis_armcc.h"
-
-/*------------------ ARM Compiler V6 -------------------*/
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-  #include "cmsis_armcc_V6.h"
-
-/*------------------ GNU Compiler ----------------------*/
-#elif defined ( __GNUC__ )
-  #include "cmsis_gcc.h"
-
-/*------------------ ICC Compiler ----------------------*/
-#elif defined ( __ICCARM__ )
-  #include <cmsis_iar.h>
-
-/*------------------ TI CCS Compiler -------------------*/
-#elif defined ( __TMS470__ )
-  #include <cmsis_ccs.h>
-
-/*------------------ TASKING Compiler ------------------*/
-#elif defined ( __TASKING__ )
-  /*
-   * The CMSIS functions have been implemented as intrinsics in the compiler.
-   * Please use "carm -?i" to get an up to date list of all intrinsics,
-   * Including the CMSIS ones.
-   */
-
-/*------------------ COSMIC Compiler -------------------*/
-#elif defined ( __CSMC__ )
-  #include <cmsis_csm.h>
-
-#endif
-
-/*@} end of group CMSIS_SIMD_intrinsics */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_CMSIMD_H */

Soft/STM32/Controle/Drivers/CMSIS/Include/core_sc000.h

@@ -1,40 +1,30 @@
 /**************************************************************************//**
  * @file     core_sc000.h
  * @brief    CMSIS SC000 Core Peripheral Access Layer Header File
- * @version  V4.30
- * @date     20. October 2015
+ * @version  V5.0.5
+ * @date     28. May 2018
  ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
-   All rights reserved.
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-   - Neither the name of ARM nor the names of its contributors may be used
-     to endorse or promote products derived from this software without
-     specific prior written permission.
-   *
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-   ---------------------------------------------------------------------------*/
-
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
 
 #if   defined ( __ICCARM__ )
- #pragma system_include         /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
   #pragma clang system_header   /* treat file as system include file */
 #endif
 
@@ -70,53 +60,15 @@
   @{
  */
 
+#include "cmsis_version.h"
+
 /*  CMSIS SC000 definitions */
-#define __SC000_CMSIS_VERSION_MAIN  (0x04U)                                    /*!< [31:16] CMSIS HAL main version */
-#define __SC000_CMSIS_VERSION_SUB   (0x1EU)                                    /*!< [15:0]  CMSIS HAL sub version */
+#define __SC000_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __SC000_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)                 /*!< \deprecated [15:0]  CMSIS HAL sub version */
 #define __SC000_CMSIS_VERSION       ((__SC000_CMSIS_VERSION_MAIN << 16U) | \
-                                      __SC000_CMSIS_VERSION_SUB           )    /*!< CMSIS HAL version number */
-
-#define __CORTEX_SC                 (000U)                                     /*!< Cortex secure core */
-
-
-#if   defined ( __CC_ARM )
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-
-#elif defined ( __GNUC__ )
-  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __ICCARM__ )
-  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
-  #define __STATIC_INLINE  static inline
+                                      __SC000_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
 
-#elif defined ( __TMS470__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __TASKING__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __CSMC__ )
-  #define __packed
-  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler */
-  #define __INLINE         inline                                    /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
-  #define __STATIC_INLINE  static inline
-
-#else
-  #error Unknown compiler
-#endif
+#define __CORTEX_SC                 (000U)                                   /*!< Cortex secure core */
 
 /** __FPU_USED indicates whether an FPU is used or not.
     This core does not support an FPU at all
@@ -128,7 +80,7 @@
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
 
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
   #if defined __ARM_PCS_VFP
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
@@ -143,7 +95,7 @@
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
 
-#elif defined ( __TMS470__ )
+#elif defined ( __TI_ARM__ )
   #if defined __TI_VFP_SUPPORT__
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
@@ -160,8 +112,8 @@
 
 #endif
 
-#include "core_cmInstr.h"                /* Core Instruction Access */
-#include "core_cmFunc.h"                 /* Core Function Access */
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
 
 #ifdef __cplusplus
 }
@@ -569,7 +521,7 @@ typedef struct
 
 /*@} end of group CMSIS_SysTick */
 
-#if (__MPU_PRESENT == 1U)
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
 /**
   \ingroup  CMSIS_core_register
   \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
@@ -678,18 +630,18 @@ typedef struct
 /**
   \brief   Mask and shift a bit field value for use in a register bit range.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of the bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted value.
 */
-#define _VAL2FLD(field, value)    ((value << field ## _Pos) & field ## _Msk)
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
 
 /**
   \brief     Mask and shift a register value to extract a bit filed value.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of register.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted bit field value.
 */
-#define _FLD2VAL(field, value)    ((value & field ## _Msk) >> field ## _Pos)
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
 
 /*@} end of group CMSIS_core_bitfield */
 
@@ -701,7 +653,7 @@ typedef struct
   @{
  */
 
-/* Memory mapping of SC000 Hardware */
+/* Memory mapping of Core Hardware */
 #define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
 #define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
 #define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
@@ -712,7 +664,7 @@ typedef struct
 #define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
 #define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
 
-#if (__MPU_PRESENT == 1U)
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
   #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
   #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
 #endif
@@ -742,7 +694,46 @@ typedef struct
   @{
  */
 
-/* Interrupt Priorities are WORD accessible only under ARMv6M                   */
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+/*#define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping   not available for SC000 */
+/*#define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping   not available for SC000 */
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for SC000 */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
 /* The following MACROS handle generation of the register offset and byte masks */
 #define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
 #define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
@@ -750,79 +741,128 @@ typedef struct
 
 
 /**
-  \brief   Enable External Interrupt
-  \details Enables a device-specific interrupt in the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
 {
-  NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
-  \brief   Disable External Interrupt
-  \details Disables a device-specific interrupt in the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
 {
-  NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
 }
 
 
 /**
   \brief   Get Pending Interrupt
-  \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
-  \param [in]      IRQn  Interrupt number.
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
   \return             0  Interrupt status is not pending.
   \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
 {
-  return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
 }
 
 
 /**
   \brief   Set Pending Interrupt
-  \details Sets the pending bit of an external interrupt.
-  \param [in]      IRQn  Interrupt number. Value cannot be negative.
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
 {
-  NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
   \brief   Clear Pending Interrupt
-  \details Clears the pending bit of an external interrupt.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
 {
-  NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
   \brief   Set Interrupt Priority
-  \details Sets the priority of an interrupt.
-  \note    The priority cannot be set for every core interrupt.
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
   \param [in]      IRQn  Interrupt number.
   \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
  */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
 {
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
   {
-    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
        (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
   }
   else
   {
-    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
        (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
   }
 }
@@ -830,32 +870,63 @@ __STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
 
 /**
   \brief   Get Interrupt Priority
-  \details Reads the priority of an interrupt.
-           The interrupt number can be positive to specify an external (device specific) interrupt,
-           or negative to specify an internal (core) interrupt.
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
   \param [in]   IRQn  Interrupt number.
   \return             Interrupt Priority.
                       Value is aligned automatically to the implemented priority bits of the microcontroller.
  */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
 {
 
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
   {
-    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
   }
   else
   {
-    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
   }
 }
 
 
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
 /**
   \brief   System Reset
   \details Initiates a system reset request to reset the MCU.
  */
-__STATIC_INLINE void NVIC_SystemReset(void)
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
 {
   __DSB();                                                          /* Ensure all outstanding memory accesses included
                                                                        buffered write are completed before reset */
@@ -872,6 +943,31 @@ __STATIC_INLINE void NVIC_SystemReset(void)
 /*@} end of CMSIS_Core_NVICFunctions */
 
 
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
 
 /* ##################################    SysTick function  ############################################ */
 /**
@@ -881,7 +977,7 @@ __STATIC_INLINE void NVIC_SystemReset(void)
   @{
  */
 
-#if (__Vendor_SysTickConfig == 0U)
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
 
 /**
   \brief   System Tick Configuration

Soft/STM32/Controle/Drivers/CMSIS/Include/core_sc300.h

@@ -1,40 +1,30 @@
 /**************************************************************************//**
  * @file     core_sc300.h
  * @brief    CMSIS SC300 Core Peripheral Access Layer Header File
- * @version  V4.30
- * @date     20. October 2015
+ * @version  V5.0.6
+ * @date     04. June 2018
  ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
-   All rights reserved.
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-   - Neither the name of ARM nor the names of its contributors may be used
-     to endorse or promote products derived from this software without
-     specific prior written permission.
-   *
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-   ---------------------------------------------------------------------------*/
-
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
 
 #if   defined ( __ICCARM__ )
- #pragma system_include         /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
   #pragma clang system_header   /* treat file as system include file */
 #endif
 
@@ -70,53 +60,15 @@
   @{
  */
 
+#include "cmsis_version.h"
+
 /*  CMSIS SC300 definitions */
-#define __SC300_CMSIS_VERSION_MAIN  (0x04U)                                    /*!< [31:16] CMSIS HAL main version */
-#define __SC300_CMSIS_VERSION_SUB   (0x1EU)                                    /*!< [15:0]  CMSIS HAL sub version */
+#define __SC300_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __SC300_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)                 /*!< \deprecated [15:0]  CMSIS HAL sub version */
 #define __SC300_CMSIS_VERSION       ((__SC300_CMSIS_VERSION_MAIN << 16U) | \
-                                      __SC300_CMSIS_VERSION_SUB           )    /*!< CMSIS HAL version number */
-
-#define __CORTEX_SC                 (300U)                                     /*!< Cortex secure core */
-
-
-#if   defined ( __CC_ARM )
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-
-#elif defined ( __GNUC__ )
-  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __ICCARM__ )
-  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __TMS470__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler */
-  #define __STATIC_INLINE  static inline
-
-#elif defined ( __TASKING__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler */
-  #define __STATIC_INLINE  static inline
+                                      __SC300_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
 
-#elif defined ( __CSMC__ )
-  #define __packed
-  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler */
-  #define __INLINE         inline                                    /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
-  #define __STATIC_INLINE  static inline
-
-#else
-  #error Unknown compiler
-#endif
+#define __CORTEX_SC                 (300U)                                   /*!< Cortex secure core */
 
 /** __FPU_USED indicates whether an FPU is used or not.
     This core does not support an FPU at all
@@ -128,7 +80,7 @@
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
 
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
   #if defined __ARM_PCS_VFP
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
@@ -143,7 +95,7 @@
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
 
-#elif defined ( __TMS470__ )
+#elif defined ( __TI_ARM__ )
   #if defined __TI_VFP_SUPPORT__
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
@@ -160,8 +112,8 @@
 
 #endif
 
-#include "core_cmInstr.h"                /* Core Instruction Access */
-#include "core_cmFunc.h"                 /* Core Function Access */
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
 
 #ifdef __cplusplus
 }
@@ -191,7 +143,7 @@
   #endif
 
   #ifndef __NVIC_PRIO_BITS
-    #define __NVIC_PRIO_BITS          4U
+    #define __NVIC_PRIO_BITS          3U
     #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
   #endif
 
@@ -308,9 +260,11 @@ typedef union
   struct
   {
     uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
-    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
-    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
-    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0) */
+    uint32_t _reserved0:1;               /*!< bit:      9  Reserved */
+    uint32_t ICI_IT_1:6;                 /*!< bit: 10..15  ICI/IT part 1 */
+    uint32_t _reserved1:8;               /*!< bit: 16..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit */
+    uint32_t ICI_IT_2:2;                 /*!< bit: 25..26  ICI/IT part 2 */
     uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
     uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
     uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
@@ -336,12 +290,15 @@ typedef union
 #define xPSR_Q_Pos                         27U                                            /*!< xPSR: Q Position */
 #define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
 
-#define xPSR_IT_Pos                        25U                                            /*!< xPSR: IT Position */
-#define xPSR_IT_Msk                        (3UL << xPSR_IT_Pos)                           /*!< xPSR: IT Mask */
+#define xPSR_ICI_IT_2_Pos                  25U                                            /*!< xPSR: ICI/IT part 2 Position */
+#define xPSR_ICI_IT_2_Msk                  (3UL << xPSR_ICI_IT_2_Pos)                     /*!< xPSR: ICI/IT part 2 Mask */
 
 #define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
 #define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
 
+#define xPSR_ICI_IT_1_Pos                  10U                                            /*!< xPSR: ICI/IT part 1 Position */
+#define xPSR_ICI_IT_1_Msk                  (0x3FUL << xPSR_ICI_IT_1_Pos)                  /*!< xPSR: ICI/IT part 1 Mask */
+
 #define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
 #define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
 
@@ -599,6 +556,60 @@ typedef struct
 #define SCB_CFSR_MEMFAULTSR_Pos             0U                                            /*!< SCB CFSR: Memory Manage Fault Status Register Position */
 #define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
 
+/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_MMARVALID_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 7U)               /*!< SCB CFSR (MMFSR): MMARVALID Position */
+#define SCB_CFSR_MMARVALID_Msk             (1UL << SCB_CFSR_MMARVALID_Pos)                /*!< SCB CFSR (MMFSR): MMARVALID Mask */
+
+#define SCB_CFSR_MSTKERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 4U)               /*!< SCB CFSR (MMFSR): MSTKERR Position */
+#define SCB_CFSR_MSTKERR_Msk               (1UL << SCB_CFSR_MSTKERR_Pos)                  /*!< SCB CFSR (MMFSR): MSTKERR Mask */
+
+#define SCB_CFSR_MUNSTKERR_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 3U)               /*!< SCB CFSR (MMFSR): MUNSTKERR Position */
+#define SCB_CFSR_MUNSTKERR_Msk             (1UL << SCB_CFSR_MUNSTKERR_Pos)                /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */
+
+#define SCB_CFSR_DACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 1U)               /*!< SCB CFSR (MMFSR): DACCVIOL Position */
+#define SCB_CFSR_DACCVIOL_Msk              (1UL << SCB_CFSR_DACCVIOL_Pos)                 /*!< SCB CFSR (MMFSR): DACCVIOL Mask */
+
+#define SCB_CFSR_IACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 0U)               /*!< SCB CFSR (MMFSR): IACCVIOL Position */
+#define SCB_CFSR_IACCVIOL_Msk              (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/)             /*!< SCB CFSR (MMFSR): IACCVIOL Mask */
+
+/* BusFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_BFARVALID_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 7U)                  /*!< SCB CFSR (BFSR): BFARVALID Position */
+#define SCB_CFSR_BFARVALID_Msk            (1UL << SCB_CFSR_BFARVALID_Pos)                 /*!< SCB CFSR (BFSR): BFARVALID Mask */
+
+#define SCB_CFSR_STKERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 4U)                  /*!< SCB CFSR (BFSR): STKERR Position */
+#define SCB_CFSR_STKERR_Msk               (1UL << SCB_CFSR_STKERR_Pos)                    /*!< SCB CFSR (BFSR): STKERR Mask */
+
+#define SCB_CFSR_UNSTKERR_Pos             (SCB_CFSR_BUSFAULTSR_Pos + 3U)                  /*!< SCB CFSR (BFSR): UNSTKERR Position */
+#define SCB_CFSR_UNSTKERR_Msk             (1UL << SCB_CFSR_UNSTKERR_Pos)                  /*!< SCB CFSR (BFSR): UNSTKERR Mask */
+
+#define SCB_CFSR_IMPRECISERR_Pos          (SCB_CFSR_BUSFAULTSR_Pos + 2U)                  /*!< SCB CFSR (BFSR): IMPRECISERR Position */
+#define SCB_CFSR_IMPRECISERR_Msk          (1UL << SCB_CFSR_IMPRECISERR_Pos)               /*!< SCB CFSR (BFSR): IMPRECISERR Mask */
+
+#define SCB_CFSR_PRECISERR_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 1U)                  /*!< SCB CFSR (BFSR): PRECISERR Position */
+#define SCB_CFSR_PRECISERR_Msk            (1UL << SCB_CFSR_PRECISERR_Pos)                 /*!< SCB CFSR (BFSR): PRECISERR Mask */
+
+#define SCB_CFSR_IBUSERR_Pos              (SCB_CFSR_BUSFAULTSR_Pos + 0U)                  /*!< SCB CFSR (BFSR): IBUSERR Position */
+#define SCB_CFSR_IBUSERR_Msk              (1UL << SCB_CFSR_IBUSERR_Pos)                   /*!< SCB CFSR (BFSR): IBUSERR Mask */
+
+/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_DIVBYZERO_Pos            (SCB_CFSR_USGFAULTSR_Pos + 9U)                  /*!< SCB CFSR (UFSR): DIVBYZERO Position */
+#define SCB_CFSR_DIVBYZERO_Msk            (1UL << SCB_CFSR_DIVBYZERO_Pos)                 /*!< SCB CFSR (UFSR): DIVBYZERO Mask */
+
+#define SCB_CFSR_UNALIGNED_Pos            (SCB_CFSR_USGFAULTSR_Pos + 8U)                  /*!< SCB CFSR (UFSR): UNALIGNED Position */
+#define SCB_CFSR_UNALIGNED_Msk            (1UL << SCB_CFSR_UNALIGNED_Pos)                 /*!< SCB CFSR (UFSR): UNALIGNED Mask */
+
+#define SCB_CFSR_NOCP_Pos                 (SCB_CFSR_USGFAULTSR_Pos + 3U)                  /*!< SCB CFSR (UFSR): NOCP Position */
+#define SCB_CFSR_NOCP_Msk                 (1UL << SCB_CFSR_NOCP_Pos)                      /*!< SCB CFSR (UFSR): NOCP Mask */
+
+#define SCB_CFSR_INVPC_Pos                (SCB_CFSR_USGFAULTSR_Pos + 2U)                  /*!< SCB CFSR (UFSR): INVPC Position */
+#define SCB_CFSR_INVPC_Msk                (1UL << SCB_CFSR_INVPC_Pos)                     /*!< SCB CFSR (UFSR): INVPC Mask */
+
+#define SCB_CFSR_INVSTATE_Pos             (SCB_CFSR_USGFAULTSR_Pos + 1U)                  /*!< SCB CFSR (UFSR): INVSTATE Position */
+#define SCB_CFSR_INVSTATE_Msk             (1UL << SCB_CFSR_INVSTATE_Pos)                  /*!< SCB CFSR (UFSR): INVSTATE Mask */
+
+#define SCB_CFSR_UNDEFINSTR_Pos           (SCB_CFSR_USGFAULTSR_Pos + 0U)                  /*!< SCB CFSR (UFSR): UNDEFINSTR Position */
+#define SCB_CFSR_UNDEFINSTR_Msk           (1UL << SCB_CFSR_UNDEFINSTR_Pos)                /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */
+
 /* SCB Hard Fault Status Register Definitions */
 #define SCB_HFSR_DEBUGEVT_Pos              31U                                            /*!< SCB HFSR: DEBUGEVT Position */
 #define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
@@ -966,7 +977,7 @@ typedef struct
  */
 typedef struct
 {
-  __IOM uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
   __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
         uint32_t RESERVED0[2U];
   __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
@@ -977,7 +988,7 @@ typedef struct
   __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
   __IM  uint32_t FSCR;                   /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
         uint32_t RESERVED3[759U];
-  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER */
+  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER Register */
   __IM  uint32_t FIFO0;                  /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
   __IM  uint32_t ITATBCTR2;              /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
         uint32_t RESERVED4[1U];
@@ -1047,8 +1058,11 @@ typedef struct
 #define TPI_FIFO0_ETM0_Msk                 (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/)          /*!< TPI FIFO0: ETM0 Mask */
 
 /* TPI ITATBCTR2 Register Definitions */
-#define TPI_ITATBCTR2_ATREADY_Pos           0U                                         /*!< TPI ITATBCTR2: ATREADY Position */
-#define TPI_ITATBCTR2_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/)    /*!< TPI ITATBCTR2: ATREADY Mask */
+#define TPI_ITATBCTR2_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY2 Position */
+#define TPI_ITATBCTR2_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/)   /*!< TPI ITATBCTR2: ATREADY2 Mask */
+
+#define TPI_ITATBCTR2_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY1 Position */
+#define TPI_ITATBCTR2_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/)   /*!< TPI ITATBCTR2: ATREADY1 Mask */
 
 /* TPI Integration ITM Data Register Definitions (FIFO1) */
 #define TPI_FIFO1_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO1: ITM_ATVALID Position */
@@ -1073,12 +1087,15 @@ typedef struct
 #define TPI_FIFO1_ITM0_Msk                 (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/)          /*!< TPI FIFO1: ITM0 Mask */
 
 /* TPI ITATBCTR0 Register Definitions */
-#define TPI_ITATBCTR0_ATREADY_Pos           0U                                         /*!< TPI ITATBCTR0: ATREADY Position */
-#define TPI_ITATBCTR0_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/)    /*!< TPI ITATBCTR0: ATREADY Mask */
+#define TPI_ITATBCTR0_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY2 Position */
+#define TPI_ITATBCTR0_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/)   /*!< TPI ITATBCTR0: ATREADY2 Mask */
+
+#define TPI_ITATBCTR0_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY1 Position */
+#define TPI_ITATBCTR0_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/)   /*!< TPI ITATBCTR0: ATREADY1 Mask */
 
 /* TPI Integration Mode Control Register Definitions */
 #define TPI_ITCTRL_Mode_Pos                 0U                                         /*!< TPI ITCTRL: Mode Position */
-#define TPI_ITCTRL_Mode_Msk                (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+#define TPI_ITCTRL_Mode_Msk                (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
 
 /* TPI DEVID Register Definitions */
 #define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
@@ -1100,16 +1117,16 @@ typedef struct
 #define TPI_DEVID_NrTraceInput_Msk         (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
 
 /* TPI DEVTYPE Register Definitions */
-#define TPI_DEVTYPE_MajorType_Pos           4U                                         /*!< TPI DEVTYPE: MajorType Position */
-#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
-
-#define TPI_DEVTYPE_SubType_Pos             0U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
 #define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
 
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
 /*@}*/ /* end of group CMSIS_TPI */
 
 
-#if (__MPU_PRESENT == 1U)
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
 /**
   \ingroup  CMSIS_core_register
   \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
@@ -1319,18 +1336,18 @@ typedef struct
 /**
   \brief   Mask and shift a bit field value for use in a register bit range.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of the bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted value.
 */
-#define _VAL2FLD(field, value)    ((value << field ## _Pos) & field ## _Msk)
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
 
 /**
   \brief     Mask and shift a register value to extract a bit filed value.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of register.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted bit field value.
 */
-#define _FLD2VAL(field, value)    ((value & field ## _Msk) >> field ## _Pos)
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
 
 /*@} end of group CMSIS_core_bitfield */
 
@@ -1342,7 +1359,7 @@ typedef struct
   @{
  */
 
-/* Memory mapping of Cortex-M3 Hardware */
+/* Memory mapping of Core Hardware */
 #define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
 #define ITM_BASE            (0xE0000000UL)                            /*!< ITM Base Address */
 #define DWT_BASE            (0xE0001000UL)                            /*!< DWT Base Address */
@@ -1361,7 +1378,7 @@ typedef struct
 #define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct */
 #define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE)   /*!< Core Debug configuration struct */
 
-#if (__MPU_PRESENT == 1U)
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
   #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
   #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
 #endif
@@ -1392,6 +1409,46 @@ typedef struct
   @{
  */
 
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+
 /**
   \brief   Set Priority Grouping
   \details Sets the priority grouping field using the required unlock sequence.
@@ -1401,7 +1458,7 @@ typedef struct
            priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
   \param [in]      PriorityGroup  Priority grouping field.
  */
-__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
 {
   uint32_t reg_value;
   uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
@@ -1420,121 +1477,178 @@ __STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
   \details Reads the priority grouping field from the NVIC Interrupt Controller.
   \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
  */
-__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
 {
   return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
 }
 
 
 /**
-  \brief   Enable External Interrupt
-  \details Enables a device-specific interrupt in the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
 {
-  NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
-  \brief   Disable External Interrupt
-  \details Disables a device-specific interrupt in the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
 {
-  NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
 }
 
 
 /**
   \brief   Get Pending Interrupt
-  \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
-  \param [in]      IRQn  Interrupt number.
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
   \return             0  Interrupt status is not pending.
   \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
 {
-  return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
 }
 
 
 /**
   \brief   Set Pending Interrupt
-  \details Sets the pending bit of an external interrupt.
-  \param [in]      IRQn  Interrupt number. Value cannot be negative.
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
 {
-  NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
   \brief   Clear Pending Interrupt
-  \details Clears the pending bit of an external interrupt.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
 {
-  NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
 }
 
 
 /**
   \brief   Get Active Interrupt
-  \details Reads the active register in NVIC and returns the active bit.
-  \param [in]      IRQn  Interrupt number.
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
   \return             0  Interrupt status is not active.
   \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
 {
-  return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
 }
 
 
 /**
   \brief   Set Interrupt Priority
-  \details Sets the priority of an interrupt.
-  \note    The priority cannot be set for every core interrupt.
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
   \param [in]      IRQn  Interrupt number.
   \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
  */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
 {
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
   {
-    SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+    NVIC->IP[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
   }
   else
   {
-    NVIC->IP[((uint32_t)(int32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+    SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
   }
 }
 
 
 /**
   \brief   Get Interrupt Priority
-  \details Reads the priority of an interrupt.
-           The interrupt number can be positive to specify an external (device specific) interrupt,
-           or negative to specify an internal (core) interrupt.
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
   \param [in]   IRQn  Interrupt number.
   \return             Interrupt Priority.
                       Value is aligned automatically to the implemented priority bits of the microcontroller.
  */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
 {
 
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
   {
-    return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+    return(((uint32_t)NVIC->IP[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
   }
   else
   {
-    return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+    return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
   }
 }
 
@@ -1591,11 +1705,42 @@ __STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGr
 }
 
 
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
 /**
   \brief   System Reset
   \details Initiates a system reset request to reset the MCU.
  */
-__STATIC_INLINE void NVIC_SystemReset(void)
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
 {
   __DSB();                                                          /* Ensure all outstanding memory accesses included
                                                                        buffered write are completed before reset */
@@ -1613,6 +1758,31 @@ __STATIC_INLINE void NVIC_SystemReset(void)
 /*@} end of CMSIS_Core_NVICFunctions */
 
 
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
 
 /* ##################################    SysTick function  ############################################ */
 /**
@@ -1622,7 +1792,7 @@ __STATIC_INLINE void NVIC_SystemReset(void)
   @{
  */
 
-#if (__Vendor_SysTickConfig == 0U)
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
 
 /**
   \brief   System Tick Configuration
@@ -1665,8 +1835,8 @@ __STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
   @{
  */
 
-extern volatile int32_t ITM_RxBuffer;                    /*!< External variable to receive characters. */
-#define                 ITM_RXBUFFER_EMPTY   0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+extern volatile int32_t ITM_RxBuffer;                              /*!< External variable to receive characters. */
+#define                 ITM_RXBUFFER_EMPTY  ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
 
 
 /**

Soft/STM32/Controle/Drivers/CMSIS/Include/mpu_armv7.h

@@ -0,0 +1,270 @@
+/******************************************************************************
+ * @file     mpu_armv7.h
+ * @brief    CMSIS MPU API for Armv7-M MPU
+ * @version  V5.0.4
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header    /* treat file as system include file */
+#endif
+ 
+#ifndef ARM_MPU_ARMV7_H
+#define ARM_MPU_ARMV7_H
+
+#define ARM_MPU_REGION_SIZE_32B      ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes
+#define ARM_MPU_REGION_SIZE_64B      ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes
+#define ARM_MPU_REGION_SIZE_128B     ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes
+#define ARM_MPU_REGION_SIZE_256B     ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes
+#define ARM_MPU_REGION_SIZE_512B     ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes
+#define ARM_MPU_REGION_SIZE_1KB      ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte
+#define ARM_MPU_REGION_SIZE_2KB      ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes
+#define ARM_MPU_REGION_SIZE_4KB      ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes
+#define ARM_MPU_REGION_SIZE_8KB      ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes
+#define ARM_MPU_REGION_SIZE_16KB     ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes
+#define ARM_MPU_REGION_SIZE_32KB     ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes
+#define ARM_MPU_REGION_SIZE_64KB     ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes
+#define ARM_MPU_REGION_SIZE_128KB    ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes
+#define ARM_MPU_REGION_SIZE_256KB    ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes
+#define ARM_MPU_REGION_SIZE_512KB    ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes
+#define ARM_MPU_REGION_SIZE_1MB      ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte
+#define ARM_MPU_REGION_SIZE_2MB      ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes
+#define ARM_MPU_REGION_SIZE_4MB      ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes
+#define ARM_MPU_REGION_SIZE_8MB      ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes
+#define ARM_MPU_REGION_SIZE_16MB     ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes
+#define ARM_MPU_REGION_SIZE_32MB     ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes
+#define ARM_MPU_REGION_SIZE_64MB     ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes
+#define ARM_MPU_REGION_SIZE_128MB    ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes
+#define ARM_MPU_REGION_SIZE_256MB    ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes
+#define ARM_MPU_REGION_SIZE_512MB    ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes
+#define ARM_MPU_REGION_SIZE_1GB      ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte
+#define ARM_MPU_REGION_SIZE_2GB      ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes
+#define ARM_MPU_REGION_SIZE_4GB      ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes
+
+#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access
+#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only
+#define ARM_MPU_AP_URO  2U ///!< MPU Access Permission unprivileged access read-only
+#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access
+#define ARM_MPU_AP_PRO  5U ///!< MPU Access Permission privileged access read-only
+#define ARM_MPU_AP_RO   6U ///!< MPU Access Permission read-only access
+
+/** MPU Region Base Address Register Value
+*
+* \param Region The region to be configured, number 0 to 15.
+* \param BaseAddress The base address for the region.
+*/
+#define ARM_MPU_RBAR(Region, BaseAddress) \
+  (((BaseAddress) & MPU_RBAR_ADDR_Msk) |  \
+   ((Region) & MPU_RBAR_REGION_Msk)    |  \
+   (MPU_RBAR_VALID_Msk))
+
+/**
+* MPU Memory Access Attributes
+* 
+* \param TypeExtField      Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
+* \param IsShareable       Region is shareable between multiple bus masters.
+* \param IsCacheable       Region is cacheable, i.e. its value may be kept in cache.
+* \param IsBufferable      Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
+*/  
+#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable)   \
+  ((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk)                 | \
+   (((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk)                      | \
+   (((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk)                      | \
+   (((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk))
+
+/**
+* MPU Region Attribute and Size Register Value
+* 
+* \param DisableExec       Instruction access disable bit, 1= disable instruction fetches.
+* \param AccessPermission  Data access permissions, allows you to configure read/write access for User and Privileged mode.
+* \param AccessAttributes  Memory access attribution, see \ref ARM_MPU_ACCESS_.
+* \param SubRegionDisable  Sub-region disable field.
+* \param Size              Region size of the region to be configured, for example 4K, 8K.
+*/
+#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size)      \
+  ((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk)                                          | \
+   (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk)                                      | \
+   (((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk)))
+  
+/**
+* MPU Region Attribute and Size Register Value
+* 
+* \param DisableExec       Instruction access disable bit, 1= disable instruction fetches.
+* \param AccessPermission  Data access permissions, allows you to configure read/write access for User and Privileged mode.
+* \param TypeExtField      Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
+* \param IsShareable       Region is shareable between multiple bus masters.
+* \param IsCacheable       Region is cacheable, i.e. its value may be kept in cache.
+* \param IsBufferable      Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
+* \param SubRegionDisable  Sub-region disable field.
+* \param Size              Region size of the region to be configured, for example 4K, 8K.
+*/                         
+#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \
+  ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size)
+
+/**
+* MPU Memory Access Attribute for strongly ordered memory.
+*  - TEX: 000b
+*  - Shareable
+*  - Non-cacheable
+*  - Non-bufferable
+*/ 
+#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U)
+
+/**
+* MPU Memory Access Attribute for device memory.
+*  - TEX: 000b (if non-shareable) or 010b (if shareable)
+*  - Shareable or non-shareable
+*  - Non-cacheable
+*  - Bufferable (if shareable) or non-bufferable (if non-shareable)
+*
+* \param IsShareable Configures the device memory as shareable or non-shareable.
+*/ 
+#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U))
+
+/**
+* MPU Memory Access Attribute for normal memory.
+*  - TEX: 1BBb (reflecting outer cacheability rules)
+*  - Shareable or non-shareable
+*  - Cacheable or non-cacheable (reflecting inner cacheability rules)
+*  - Bufferable or non-bufferable (reflecting inner cacheability rules)
+*
+* \param OuterCp Configures the outer cache policy.
+* \param InnerCp Configures the inner cache policy.
+* \param IsShareable Configures the memory as shareable or non-shareable.
+*/ 
+#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U))
+
+/**
+* MPU Memory Access Attribute non-cacheable policy.
+*/
+#define ARM_MPU_CACHEP_NOCACHE 0U
+
+/**
+* MPU Memory Access Attribute write-back, write and read allocate policy.
+*/
+#define ARM_MPU_CACHEP_WB_WRA 1U
+
+/**
+* MPU Memory Access Attribute write-through, no write allocate policy.
+*/
+#define ARM_MPU_CACHEP_WT_NWA 2U
+
+/**
+* MPU Memory Access Attribute write-back, no write allocate policy.
+*/
+#define ARM_MPU_CACHEP_WB_NWA 3U
+
+
+/**
+* Struct for a single MPU Region
+*/
+typedef struct {
+  uint32_t RBAR; //!< The region base address register value (RBAR)
+  uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR
+} ARM_MPU_Region_t;
+    
+/** Enable the MPU.
+* \param MPU_Control Default access permissions for unconfigured regions.
+*/
+__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
+{
+  __DSB();
+  __ISB();
+  MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+}
+
+/** Disable the MPU.
+*/
+__STATIC_INLINE void ARM_MPU_Disable(void)
+{
+  __DSB();
+  __ISB();
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  MPU->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+
+/** Clear and disable the given MPU region.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
+{
+  MPU->RNR = rnr;
+  MPU->RASR = 0U;
+}
+
+/** Configure an MPU region.
+* \param rbar Value for RBAR register.
+* \param rsar Value for RSAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr)
+{
+  MPU->RBAR = rbar;
+  MPU->RASR = rasr;
+}
+
+/** Configure the given MPU region.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rsar Value for RSAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr)
+{
+  MPU->RNR = rnr;
+  MPU->RBAR = rbar;
+  MPU->RASR = rasr;
+}
+
+/** Memcopy with strictly ordered memory access, e.g. for register targets.
+* \param dst Destination data is copied to.
+* \param src Source data is copied from.
+* \param len Amount of data words to be copied.
+*/
+__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
+{
+  uint32_t i;
+  for (i = 0U; i < len; ++i) 
+  {
+    dst[i] = src[i];
+  }
+}
+
+/** Load the given number of MPU regions from a table.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
+  while (cnt > MPU_TYPE_RALIASES) {
+    orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize);
+    table += MPU_TYPE_RALIASES;
+    cnt -= MPU_TYPE_RALIASES;
+  }
+  orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize);
+}
+
+#endif

Soft/STM32/Controle/Drivers/CMSIS/Include/mpu_armv8.h

@@ -0,0 +1,333 @@
+/******************************************************************************
+ * @file     mpu_armv8.h
+ * @brief    CMSIS MPU API for Armv8-M MPU
+ * @version  V5.0.4
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header    /* treat file as system include file */
+#endif
+
+#ifndef ARM_MPU_ARMV8_H
+#define ARM_MPU_ARMV8_H
+
+/** \brief Attribute for device memory (outer only) */
+#define ARM_MPU_ATTR_DEVICE                           ( 0U )
+
+/** \brief Attribute for non-cacheable, normal memory */
+#define ARM_MPU_ATTR_NON_CACHEABLE                    ( 4U )
+
+/** \brief Attribute for normal memory (outer and inner)
+* \param NT Non-Transient: Set to 1 for non-transient data.
+* \param WB Write-Back: Set to 1 to use write-back update policy.
+* \param RA Read Allocation: Set to 1 to use cache allocation on read miss.
+* \param WA Write Allocation: Set to 1 to use cache allocation on write miss.
+*/
+#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \
+  (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U))
+
+/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U)
+
+/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_nGnRE  (1U)
+
+/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_nGRE   (2U)
+
+/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_GRE    (3U)
+
+/** \brief Memory Attribute
+* \param O Outer memory attributes
+* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes
+*/
+#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U)))
+
+/** \brief Normal memory non-shareable  */
+#define ARM_MPU_SH_NON   (0U)
+
+/** \brief Normal memory outer shareable  */
+#define ARM_MPU_SH_OUTER (2U)
+
+/** \brief Normal memory inner shareable  */
+#define ARM_MPU_SH_INNER (3U)
+
+/** \brief Memory access permissions
+* \param RO Read-Only: Set to 1 for read-only memory.
+* \param NP Non-Privileged: Set to 1 for non-privileged memory.
+*/
+#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U))
+
+/** \brief Region Base Address Register value
+* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned.
+* \param SH Defines the Shareability domain for this memory region.
+* \param RO Read-Only: Set to 1 for a read-only memory region.
+* \param NP Non-Privileged: Set to 1 for a non-privileged memory region.
+* \oaram XN eXecute Never: Set to 1 for a non-executable memory region.
+*/
+#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \
+  ((BASE & MPU_RBAR_BASE_Msk) | \
+  ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \
+  ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \
+  ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk))
+
+/** \brief Region Limit Address Register value
+* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended.
+* \param IDX The attribute index to be associated with this memory region.
+*/
+#define ARM_MPU_RLAR(LIMIT, IDX) \
+  ((LIMIT & MPU_RLAR_LIMIT_Msk) | \
+  ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \
+  (MPU_RLAR_EN_Msk))
+
+/**
+* Struct for a single MPU Region
+*/
+typedef struct {
+  uint32_t RBAR;                   /*!< Region Base Address Register value */
+  uint32_t RLAR;                   /*!< Region Limit Address Register value */
+} ARM_MPU_Region_t;
+    
+/** Enable the MPU.
+* \param MPU_Control Default access permissions for unconfigured regions.
+*/
+__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
+{
+  __DSB();
+  __ISB();
+  MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+}
+
+/** Disable the MPU.
+*/
+__STATIC_INLINE void ARM_MPU_Disable(void)
+{
+  __DSB();
+  __ISB();
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  MPU->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+
+#ifdef MPU_NS
+/** Enable the Non-secure MPU.
+* \param MPU_Control Default access permissions for unconfigured regions.
+*/
+__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control)
+{
+  __DSB();
+  __ISB();
+  MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+}
+
+/** Disable the Non-secure MPU.
+*/
+__STATIC_INLINE void ARM_MPU_Disable_NS(void)
+{
+  __DSB();
+  __ISB();
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  MPU_NS->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+#endif
+
+/** Set the memory attribute encoding to the given MPU.
+* \param mpu Pointer to the MPU to be configured.
+* \param idx The attribute index to be set [0-7]
+* \param attr The attribute value to be set.
+*/
+__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr)
+{
+  const uint8_t reg = idx / 4U;
+  const uint32_t pos = ((idx % 4U) * 8U);
+  const uint32_t mask = 0xFFU << pos;
+  
+  if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) {
+    return; // invalid index
+  }
+  
+  mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask));
+}
+
+/** Set the memory attribute encoding.
+* \param idx The attribute index to be set [0-7]
+* \param attr The attribute value to be set.
+*/
+__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr)
+{
+  ARM_MPU_SetMemAttrEx(MPU, idx, attr);
+}
+
+#ifdef MPU_NS
+/** Set the memory attribute encoding to the Non-secure MPU.
+* \param idx The attribute index to be set [0-7]
+* \param attr The attribute value to be set.
+*/
+__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr)
+{
+  ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr);
+}
+#endif
+
+/** Clear and disable the given MPU region of the given MPU.
+* \param mpu Pointer to MPU to be used.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr)
+{
+  mpu->RNR = rnr;
+  mpu->RLAR = 0U;
+}
+
+/** Clear and disable the given MPU region.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
+{
+  ARM_MPU_ClrRegionEx(MPU, rnr);
+}
+
+#ifdef MPU_NS
+/** Clear and disable the given Non-secure MPU region.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr)
+{  
+  ARM_MPU_ClrRegionEx(MPU_NS, rnr);
+}
+#endif
+
+/** Configure the given MPU region of the given MPU.
+* \param mpu Pointer to MPU to be used.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rlar Value for RLAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar)
+{
+  mpu->RNR = rnr;
+  mpu->RBAR = rbar;
+  mpu->RLAR = rlar;
+}
+
+/** Configure the given MPU region.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rlar Value for RLAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar)
+{
+  ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar);
+}
+
+#ifdef MPU_NS
+/** Configure the given Non-secure MPU region.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rlar Value for RLAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar)
+{
+  ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar);  
+}
+#endif
+
+/** Memcopy with strictly ordered memory access, e.g. for register targets.
+* \param dst Destination data is copied to.
+* \param src Source data is copied from.
+* \param len Amount of data words to be copied.
+*/
+__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
+{
+  uint32_t i;
+  for (i = 0U; i < len; ++i) 
+  {
+    dst[i] = src[i];
+  }
+}
+
+/** Load the given number of MPU regions from a table to the given MPU.
+* \param mpu Pointer to the MPU registers to be used.
+* \param rnr First region number to be configured.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
+  if (cnt == 1U) {
+    mpu->RNR = rnr;
+    orderedCpy(&(mpu->RBAR), &(table->RBAR), rowWordSize);
+  } else {
+    uint32_t rnrBase   = rnr & ~(MPU_TYPE_RALIASES-1U);
+    uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES;
+    
+    mpu->RNR = rnrBase;
+    while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) {
+      uint32_t c = MPU_TYPE_RALIASES - rnrOffset;
+      orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize);
+      table += c;
+      cnt -= c;
+      rnrOffset = 0U;
+      rnrBase += MPU_TYPE_RALIASES;
+      mpu->RNR = rnrBase;
+    }
+    
+    orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize);
+  }
+}
+
+/** Load the given number of MPU regions from a table.
+* \param rnr First region number to be configured.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  ARM_MPU_LoadEx(MPU, rnr, table, cnt);
+}
+
+#ifdef MPU_NS
+/** Load the given number of MPU regions from a table to the Non-secure MPU.
+* \param rnr First region number to be configured.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt);
+}
+#endif
+
+#endif
+

Soft/STM32/Controle/Drivers/CMSIS/Include/tz_context.h

@@ -0,0 +1,70 @@
+/******************************************************************************
+ * @file     tz_context.h
+ * @brief    Context Management for Armv8-M TrustZone
+ * @version  V1.0.1
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef TZ_CONTEXT_H
+#define TZ_CONTEXT_H
+ 
+#include <stdint.h>
+ 
+#ifndef TZ_MODULEID_T
+#define TZ_MODULEID_T
+/// \details Data type that identifies secure software modules called by a process.
+typedef uint32_t TZ_ModuleId_t;
+#endif
+ 
+/// \details TZ Memory ID identifies an allocated memory slot.
+typedef uint32_t TZ_MemoryId_t;
+  
+/// Initialize secure context memory system
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_InitContextSystem_S (void);
+ 
+/// Allocate context memory for calling secure software modules in TrustZone
+/// \param[in]  module   identifies software modules called from non-secure mode
+/// \return value != 0 id TrustZone memory slot identifier
+/// \return value 0    no memory available or internal error
+TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module);
+ 
+/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S
+/// \param[in]  id  TrustZone memory slot identifier
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id);
+ 
+/// Load secure context (called on RTOS thread context switch)
+/// \param[in]  id  TrustZone memory slot identifier
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_LoadContext_S (TZ_MemoryId_t id);
+ 
+/// Store secure context (called on RTOS thread context switch)
+/// \param[in]  id  TrustZone memory slot identifier
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_StoreContext_S (TZ_MemoryId_t id);
+ 
+#endif  // TZ_CONTEXT_H

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h

@@ -7,36 +7,20 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32_HAL_LEGACY
-#define __STM32_HAL_LEGACY
+#ifndef STM32_HAL_LEGACY
+#define STM32_HAL_LEGACY
 
 #ifdef __cplusplus
  extern "C" {
@@ -110,6 +94,10 @@
 #define HAL_ADC_STATE_ERROR             HAL_ADC_STATE_ERROR_INTERNAL
 #define HAL_ADC_STATE_BUSY              HAL_ADC_STATE_BUSY_INTERNAL
 #define HAL_ADC_STATE_AWD               HAL_ADC_STATE_AWD1
+
+#if defined(STM32H7)
+#define ADC_CHANNEL_VBAT_DIV4           ADC_CHANNEL_VBAT
+#endif /* STM32H7 */
 /**
   * @}
   */
@@ -274,7 +262,100 @@
 #define __HAL_REMAPDMA_CHANNEL_ENABLE            __HAL_DMA_REMAP_CHANNEL_ENABLE
 #define __HAL_REMAPDMA_CHANNEL_DISABLE           __HAL_DMA_REMAP_CHANNEL_DISABLE
 
+#if defined(STM32L4)
 
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI0            HAL_DMAMUX1_REQ_GEN_EXTI0
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI1            HAL_DMAMUX1_REQ_GEN_EXTI1
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI2            HAL_DMAMUX1_REQ_GEN_EXTI2
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI3            HAL_DMAMUX1_REQ_GEN_EXTI3
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI4            HAL_DMAMUX1_REQ_GEN_EXTI4
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI5            HAL_DMAMUX1_REQ_GEN_EXTI5
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI6            HAL_DMAMUX1_REQ_GEN_EXTI6
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI7            HAL_DMAMUX1_REQ_GEN_EXTI7
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI8            HAL_DMAMUX1_REQ_GEN_EXTI8
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI9            HAL_DMAMUX1_REQ_GEN_EXTI9
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI10           HAL_DMAMUX1_REQ_GEN_EXTI10
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI11           HAL_DMAMUX1_REQ_GEN_EXTI11
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI12           HAL_DMAMUX1_REQ_GEN_EXTI12
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI13           HAL_DMAMUX1_REQ_GEN_EXTI13
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI14           HAL_DMAMUX1_REQ_GEN_EXTI14
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI15           HAL_DMAMUX1_REQ_GEN_EXTI15
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT  HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT  HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT  HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT  HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT       HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT       HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE           HAL_DMAMUX1_REQ_GEN_DSI_TE
+#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT          HAL_DMAMUX1_REQ_GEN_DSI_EOT
+#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT        HAL_DMAMUX1_REQ_GEN_DMA2D_EOT
+#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT          HAL_DMAMUX1_REQ_GEN_LTDC_IT
+
+#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT          HAL_DMAMUX_REQ_GEN_NO_EVENT
+#define HAL_DMAMUX_REQUEST_GEN_RISING            HAL_DMAMUX_REQ_GEN_RISING
+#define HAL_DMAMUX_REQUEST_GEN_FALLING           HAL_DMAMUX_REQ_GEN_FALLING
+#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING    HAL_DMAMUX_REQ_GEN_RISING_FALLING
+
+#endif /* STM32L4 */
+
+#if defined(STM32H7)
+
+#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1
+#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2
+
+#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX
+#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX
+
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT    HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT    HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT    HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT         HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT         HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT         HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI0              HAL_DMAMUX1_REQ_GEN_EXTI0
+#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO         HAL_DMAMUX1_REQ_GEN_TIM12_TRGO
+
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP    HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP    HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT         HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT         HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP          HAL_DMAMUX2_REQ_GEN_I2C4_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP          HAL_DMAMUX2_REQ_GEN_SPI6_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT          HAL_DMAMUX2_REQ_GEN_COMP1_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT          HAL_DMAMUX2_REQ_GEN_COMP2_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP           HAL_DMAMUX2_REQ_GEN_RTC_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_EXTI0              HAL_DMAMUX2_REQ_GEN_EXTI0
+#define HAL_DMAMUX2_REQUEST_GEN_EXTI2              HAL_DMAMUX2_REQ_GEN_EXTI2
+#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT        HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT            HAL_DMAMUX2_REQ_GEN_SPI6_IT
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT      HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT      HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT
+#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT            HAL_DMAMUX2_REQ_GEN_ADC3_IT
+#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT      HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT        HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT
+#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT        HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT
+
+#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT            HAL_DMAMUX_REQ_GEN_NO_EVENT
+#define HAL_DMAMUX_REQUEST_GEN_RISING              HAL_DMAMUX_REQ_GEN_RISING
+#define HAL_DMAMUX_REQUEST_GEN_FALLING             HAL_DMAMUX_REQ_GEN_FALLING
+#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING      HAL_DMAMUX_REQ_GEN_RISING_FALLING
+
+#define DFSDM_FILTER_EXT_TRIG_LPTIM1               DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT
+#define DFSDM_FILTER_EXT_TRIG_LPTIM2               DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT
+#define DFSDM_FILTER_EXT_TRIG_LPTIM3               DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT
+
+#endif /* STM32H7 */
 
 /**
   * @}
@@ -355,6 +436,38 @@
 #define OB_RDP_LEVEL0                 OB_RDP_LEVEL_0
 #define OB_RDP_LEVEL1                 OB_RDP_LEVEL_1
 #define OB_RDP_LEVEL2                 OB_RDP_LEVEL_2
+#if defined(STM32G0)
+#define OB_BOOT_LOCK_DISABLE          OB_BOOT_ENTRY_FORCED_NONE
+#define OB_BOOT_LOCK_ENABLE           OB_BOOT_ENTRY_FORCED_FLASH
+#else
+#define OB_BOOT_ENTRY_FORCED_NONE     OB_BOOT_LOCK_DISABLE
+#define OB_BOOT_ENTRY_FORCED_FLASH    OB_BOOT_LOCK_ENABLE
+#endif
+#if defined(STM32H7)
+#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1
+#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1
+#define FLASH_FLAG_STRBER_BANK1R  FLASH_FLAG_STRBERR_BANK1
+#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2
+#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2
+#define FLASH_FLAG_STRBER_BANK2R  FLASH_FLAG_STRBERR_BANK2
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#if defined(STM32H7)
+#define __HAL_RCC_JPEG_CLK_ENABLE               __HAL_RCC_JPGDECEN_CLK_ENABLE
+#define __HAL_RCC_JPEG_CLK_DISABLE              __HAL_RCC_JPGDECEN_CLK_DISABLE
+#define __HAL_RCC_JPEG_FORCE_RESET              __HAL_RCC_JPGDECRST_FORCE_RESET
+#define __HAL_RCC_JPEG_RELEASE_RESET            __HAL_RCC_JPGDECRST_RELEASE_RESET
+#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE         __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE
+#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE        __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE
+#endif /* STM32H7 */
 
 /**
   * @}
@@ -381,12 +494,12 @@
 /** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
   * @{
   */
-#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4)
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7)
 #define FMC_NAND_PCC_WAIT_FEATURE_DISABLE       FMC_NAND_WAIT_FEATURE_DISABLE
 #define FMC_NAND_PCC_WAIT_FEATURE_ENABLE        FMC_NAND_WAIT_FEATURE_ENABLE
 #define FMC_NAND_PCC_MEM_BUS_WIDTH_8            FMC_NAND_MEM_BUS_WIDTH_8
 #define FMC_NAND_PCC_MEM_BUS_WIDTH_16           FMC_NAND_MEM_BUS_WIDTH_16
-#else
+#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4)
 #define FMC_NAND_WAIT_FEATURE_DISABLE           FMC_NAND_PCC_WAIT_FEATURE_DISABLE
 #define FMC_NAND_WAIT_FEATURE_ENABLE            FMC_NAND_PCC_WAIT_FEATURE_ENABLE
 #define FMC_NAND_MEM_BUS_WIDTH_8                FMC_NAND_PCC_MEM_BUS_WIDTH_8
@@ -427,16 +540,25 @@
 #define GPIO_AF12_SDMMC                           GPIO_AF12_SDMMC1
 #endif
 
+#if defined(STM32H7)
+#define GPIO_AF7_SDIO1                            GPIO_AF7_SDMMC1
+#define GPIO_AF8_SDIO1                            GPIO_AF8_SDMMC1
+#define GPIO_AF12_SDIO1                           GPIO_AF12_SDMMC1
+#define GPIO_AF9_SDIO2                            GPIO_AF9_SDMMC2
+#define GPIO_AF10_SDIO2                           GPIO_AF10_SDMMC2
+#define GPIO_AF11_SDIO2                           GPIO_AF11_SDMMC2
+#endif
+
 #define GPIO_AF0_LPTIM                            GPIO_AF0_LPTIM1
 #define GPIO_AF1_LPTIM                            GPIO_AF1_LPTIM1
 #define GPIO_AF2_LPTIM                            GPIO_AF2_LPTIM1
 
-#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4)
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32H7)
 #define  GPIO_SPEED_LOW                           GPIO_SPEED_FREQ_LOW
 #define  GPIO_SPEED_MEDIUM                        GPIO_SPEED_FREQ_MEDIUM
 #define  GPIO_SPEED_FAST                          GPIO_SPEED_FREQ_HIGH
 #define  GPIO_SPEED_HIGH                          GPIO_SPEED_FREQ_VERY_HIGH
-#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 */
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32H7*/
 
 #if defined(STM32L1)
  #define  GPIO_SPEED_VERY_LOW    GPIO_SPEED_FREQ_LOW
@@ -456,78 +578,6 @@
   * @}
   */
 
-/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose
-  * @{
-  */
-
-#if defined(STM32H7)
- #define __HAL_RCC_JPEG_CLK_ENABLE               __HAL_RCC_JPGDECEN_CLK_ENABLE
- #define __HAL_RCC_JPEG_CLK_DISABLE              __HAL_RCC_JPGDECEN_CLK_DISABLE
- #define __HAL_RCC_JPEG_FORCE_RESET              __HAL_RCC_JPGDECRST_FORCE_RESET
- #define __HAL_RCC_JPEG_RELEASE_RESET            __HAL_RCC_JPGDECRST_RELEASE_RESET
- #define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE         __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE
- #define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE        __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE
-
-  #define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1
-  #define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2
-
- #define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX
- #define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX
-
- #define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT    HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT
- #define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT    HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT
- #define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT    HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT
- #define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT         HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT
- #define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT         HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT
- #define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT         HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT
- #define HAL_DMAMUX1_REQUEST_GEN_EXTI0              HAL_DMAMUX1_REQ_GEN_EXTI0
- #define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO         HAL_DMAMUX1_REQ_GEN_TIM12_TRGO
-
- #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT
- #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT
- #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT
- #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT
- #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT
- #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT
- #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT
- #define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP    HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP
- #define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP    HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP
- #define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP
- #define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT         HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT
- #define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP
- #define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT         HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT
- #define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP
- #define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP
- #define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP          HAL_DMAMUX2_REQ_GEN_I2C4_WKUP
- #define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP          HAL_DMAMUX2_REQ_GEN_SPI6_WKUP
- #define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT          HAL_DMAMUX2_REQ_GEN_COMP1_OUT
- #define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT          HAL_DMAMUX2_REQ_GEN_COMP2_OUT
- #define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP           HAL_DMAMUX2_REQ_GEN_RTC_WKUP
- #define HAL_DMAMUX2_REQUEST_GEN_EXTI0              HAL_DMAMUX2_REQ_GEN_EXTI0
- #define HAL_DMAMUX2_REQUEST_GEN_EXTI2              HAL_DMAMUX2_REQ_GEN_EXTI2
- #define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT        HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT
- #define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT            HAL_DMAMUX2_REQ_GEN_SPI6_IT
- #define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT      HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT
- #define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT      HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT
- #define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT            HAL_DMAMUX2_REQ_GEN_ADC3_IT
- #define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT      HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT
- #define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT        HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT
- #define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT        HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT
-
- #define HAL_DMAMUX_REQUEST_GEN_NO_EVENT            HAL_DMAMUX_REQ_GEN_NO_EVENT
- #define HAL_DMAMUX_REQUEST_GEN_RISING              HAL_DMAMUX_REQ_GEN_RISING
- #define HAL_DMAMUX_REQUEST_GEN_FALLING             HAL_DMAMUX_REQ_GEN_FALLING
- #define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING      HAL_DMAMUX_REQ_GEN_RISING_FALLING
-
-
-#endif /* STM32H7  */
-
-
-/**
-  * @}
-  */
-
-
 /** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
   * @{
   */
@@ -696,6 +746,16 @@
   * @{
   */
 #define I2S_STANDARD_PHILLIPS      I2S_STANDARD_PHILIPS
+
+#if defined(STM32H7)
+  #define I2S_IT_TXE               I2S_IT_TXP
+  #define I2S_IT_RXNE              I2S_IT_RXP
+
+  #define I2S_FLAG_TXE             I2S_FLAG_TXP
+  #define I2S_FLAG_RXNE            I2S_FLAG_RXP
+  #define I2S_FLAG_FRE             I2S_FLAG_TIFRE
+#endif
+
 #if defined(STM32F7)
   #define I2S_CLOCK_SYSCLK           I2S_CLOCK_PLL
 #endif
@@ -820,6 +880,21 @@
 #define SPI_NSS_PULSE_DISABLED          SPI_NSS_PULSE_DISABLE
 #define SPI_NSS_PULSE_ENABLED           SPI_NSS_PULSE_ENABLE
 
+#if defined(STM32H7)
+
+ #define SPI_FLAG_TXE                    SPI_FLAG_TXP
+ #define SPI_FLAG_RXNE                   SPI_FLAG_RXP
+
+ #define SPI_IT_TXE                      SPI_IT_TXP
+ #define SPI_IT_RXNE                     SPI_IT_RXP
+
+ #define SPI_FRLVL_EMPTY                 SPI_RX_FIFO_0PACKET
+ #define SPI_FRLVL_QUARTER_FULL          SPI_RX_FIFO_1PACKET
+ #define SPI_FRLVL_HALF_FULL             SPI_RX_FIFO_2PACKET
+ #define SPI_FRLVL_FULL                  SPI_RX_FIFO_3PACKET
+
+#endif /* STM32H7 */
+
 /**
   * @}
   */
@@ -887,6 +962,15 @@
 #define TIM_DMABurstLength_17Transfers   TIM_DMABURSTLENGTH_17TRANSFERS
 #define TIM_DMABurstLength_18Transfers   TIM_DMABURSTLENGTH_18TRANSFERS
 
+#if defined(STM32L0)
+#define TIM22_TI1_GPIO1   TIM22_TI1_GPIO
+#define TIM22_TI1_GPIO2   TIM22_TI1_GPIO
+#endif
+
+#if defined(STM32F3)
+#define IS_TIM_HALL_INTERFACE_INSTANCE   IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE
+#endif
+
 /**
   * @}
   */
@@ -1047,8 +1131,9 @@
   * @}
   */
 
-#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) ||\
-    defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \
+  || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \
+  || defined(STM32H7)
 /** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose
   * @{
   */
@@ -1072,7 +1157,7 @@
 /**
   * @}
   */
-#endif  /* STM32L4 ||  STM32F7*/
+#endif  /* STM32L4 ||  STM32F7 ||  STM32F4 ||  STM32H7 */
 
 /** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
   * @{
@@ -1164,6 +1249,28 @@
 #define HAL_FMPI2CEx_DigitalFilter_Config     HAL_FMPI2CEx_ConfigDigitalFilter
 
 #define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+
+#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7)
+#define HAL_I2C_Master_Sequential_Transmit_IT  HAL_I2C_Master_Seq_Transmit_IT
+#define HAL_I2C_Master_Sequential_Receive_IT   HAL_I2C_Master_Seq_Receive_IT
+#define HAL_I2C_Slave_Sequential_Transmit_IT   HAL_I2C_Slave_Seq_Transmit_IT
+#define HAL_I2C_Slave_Sequential_Receive_IT    HAL_I2C_Slave_Seq_Receive_IT
+#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA
+#define HAL_I2C_Master_Sequential_Receive_DMA  HAL_I2C_Master_Seq_Receive_DMA
+#define HAL_I2C_Slave_Sequential_Transmit_DMA  HAL_I2C_Slave_Seq_Transmit_DMA
+#define HAL_I2C_Slave_Sequential_Receive_DMA   HAL_I2C_Slave_Seq_Receive_DMA
+#endif /* STM32H7 || STM32WB  || STM32G0 || STM32F4 || STM32F7 */
+
+#if defined(STM32F4)
+#define HAL_FMPI2C_Master_Sequential_Transmit_IT  HAL_FMPI2C_Master_Seq_Transmit_IT
+#define HAL_FMPI2C_Master_Sequential_Receive_IT   HAL_FMPI2C_Master_Seq_Receive_IT
+#define HAL_FMPI2C_Slave_Sequential_Transmit_IT   HAL_FMPI2C_Slave_Seq_Transmit_IT
+#define HAL_FMPI2C_Slave_Sequential_Receive_IT    HAL_FMPI2C_Slave_Seq_Receive_IT
+#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA
+#define HAL_FMPI2C_Master_Sequential_Receive_DMA  HAL_FMPI2C_Master_Seq_Receive_DMA
+#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA  HAL_FMPI2C_Slave_Seq_Transmit_DMA
+#define HAL_FMPI2C_Slave_Sequential_Receive_DMA   HAL_FMPI2C_Slave_Seq_Receive_DMA
+#endif /* STM32F4 */
  /**
   * @}
   */
@@ -1243,6 +1350,14 @@
 #define HAL_TIM_DMAError                                TIM_DMAError
 #define HAL_TIM_DMACaptureCplt                          TIM_DMACaptureCplt
 #define HAL_TIMEx_DMACommutationCplt                    TIMEx_DMACommutationCplt
+#if defined(STM32H7) || defined(STM32G0) || defined(STM32F7) || defined(STM32F4) || defined(STM32L0)
+#define HAL_TIM_SlaveConfigSynchronization              HAL_TIM_SlaveConfigSynchro
+#define HAL_TIM_SlaveConfigSynchronization_IT           HAL_TIM_SlaveConfigSynchro_IT
+#define HAL_TIMEx_CommutationCallback                   HAL_TIMEx_CommutCallback
+#define HAL_TIMEx_ConfigCommutationEvent                HAL_TIMEx_ConfigCommutEvent
+#define HAL_TIMEx_ConfigCommutationEvent_IT             HAL_TIMEx_ConfigCommutEvent_IT
+#define HAL_TIMEx_ConfigCommutationEvent_DMA            HAL_TIMEx_ConfigCommutEvent_DMA
+#endif /* STM32H7 || STM32G0 || STM32F7 || STM32F4  || STM32L0 */
 /**
   * @}
   */
@@ -1456,10 +1571,17 @@
 #define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
 #define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
 #define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
-#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
-#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
-#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
-#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#if defined(STM32H7)
+  #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1
+  #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1
+  #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1
+  #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1
+#else
+  #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+  #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+  #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+  #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#endif /* STM32H7 */
 #define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
 #define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
 #define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
@@ -1725,6 +1847,10 @@
 #define IS_I2S_INSTANCE                 IS_I2S_ALL_INSTANCE
 #define IS_I2S_INSTANCE_EXT             IS_I2S_ALL_INSTANCE_EXT
 
+#if defined(STM32H7)
+  #define __HAL_I2S_CLEAR_FREFLAG       __HAL_I2S_CLEAR_TIFREFLAG
+#endif
+
 /**
   * @}
   */
@@ -2932,7 +3058,7 @@
 /** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
   * @{
   */
-#if defined (STM32G0)
+#if defined (STM32G0) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx)
 #else
 #define __HAL_RTC_CLEAR_FLAG                      __HAL_RTC_EXTI_CLEAR_FLAG
 #endif
@@ -3064,6 +3190,7 @@
 #define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback    HAL_SDEx_Read_DMADoubleBuf1CpltCallback
 #define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback   HAL_SDEx_Write_DMADoubleBuf0CpltCallback
 #define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback   HAL_SDEx_Write_DMADoubleBuf1CpltCallback
+#define HAL_SD_DriveTransciver_1_8V_Callback          HAL_SD_DriveTransceiver_1_8V_Callback
 #endif
 /**
   * @}
@@ -3291,6 +3418,21 @@
   * @}
   */
 
+/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#if defined (STM32H7) || defined (STM32F3)
+#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT
+#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA
+#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart
+#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT
+#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA
+#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop
+#endif
+/**
+  * @}
+  */
+
 /** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
   * @{
   */
@@ -3303,7 +3445,7 @@
 }
 #endif
 
-#endif /* ___STM32_HAL_LEGACY */
+#endif /* STM32_HAL_LEGACY */
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
 

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h

@@ -7,29 +7,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -253,7 +237,9 @@ void HAL_DBGMCU_EnableDBGStandbyMode(void);
 void HAL_DBGMCU_DisableDBGStandbyMode(void);
 void HAL_EnableCompensationCell(void);
 void HAL_DisableCompensationCell(void);
-void HAL_GetUID(uint32_t *UID);
+uint32_t HAL_GetUIDw0(void);
+uint32_t HAL_GetUIDw1(void);
+uint32_t HAL_GetUIDw2(void);
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
     defined(STM32F469xx) || defined(STM32F479xx)
 void HAL_EnableMemorySwappingBank(void);

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h

@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -72,53 +56,53 @@
   */
 typedef struct
 {
-  uint32_t ClockPrescaler;        /*!< Select ADC clock prescaler. The clock is common for 
-                                       all the ADCs.
-                                       This parameter can be a value of @ref ADC_ClockPrescaler */
-  uint32_t Resolution;            /*!< Configures the ADC resolution.
-                                       This parameter can be a value of @ref ADC_Resolution */
-  uint32_t DataAlign;             /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting)
-                                       or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3).
-                                       This parameter can be a value of @ref ADC_Data_align */
-  uint32_t ScanConvMode;          /*!< Configures the sequencer of regular and injected groups.
-                                       This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
-                                       If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
-                                                    Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
-                                       If enabled:  Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank).
-                                                    Scan direction is upward: from rank1 to rank 'n'.
-                                       This parameter can be set to ENABLE or DISABLE */
-  uint32_t EOCSelection;          /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence.
-                                       This parameter can be a value of @ref ADC_EOCSelection.
-                                       Note: For injected group, end of conversion (flag&IT) is raised only at the end of the sequence.
-                                             Therefore, if end of conversion is set to end of each conversion, injected group should not be used with interruption (HAL_ADCEx_InjectedStart_IT)
-                                             or polling (HAL_ADCEx_InjectedStart and HAL_ADCEx_InjectedPollForConversion). By the way, polling is still possible since driver will use an estimated timing for end of injected conversion.
-                                       Note: If overrun feature is intended to be used, use ADC in mode 'interruption' (function HAL_ADC_Start_IT() ) with parameter EOCSelection set to end of each conversion or in mode 'transfer by DMA' (function HAL_ADC_Start_DMA()).
-                                             If overrun feature is intended to be bypassed, use ADC in mode 'polling' or 'interruption' with parameter EOCSelection must be set to end of sequence */
-  uint32_t ContinuousConvMode;    /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
-                                       after the selected trigger occurred (software start or external trigger).
-                                       This parameter can be set to ENABLE or DISABLE. */
-  uint32_t NbrOfConversion;       /*!< Specifies the number of ranks that will be converted within the regular group sequencer.
-                                       To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
-                                       This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
-  uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
-                                       Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
-                                       Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
-                                       This parameter can be set to ENABLE or DISABLE. */
-  uint32_t NbrOfDiscConversion;   /*!< Specifies the number of discontinuous conversions in which the  main sequence of regular group (parameter NbrOfConversion) will be subdivided.
-                                       If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
-                                       This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
-  uint32_t ExternalTrigConv;      /*!< Selects the external event used to trigger the conversion start of regular group.
-                                       If set to ADC_SOFTWARE_START, external triggers are disabled.
-                                       If set to external trigger source, triggering is on event rising edge by default.
-                                       This parameter can be a value of @ref ADC_External_trigger_Source_Regular */
-  uint32_t ExternalTrigConvEdge;  /*!< Selects the external trigger edge of regular group.
-                                       If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
-                                       This parameter can be a value of @ref ADC_External_trigger_edge_Regular */
-  uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached)
-                                       or in Continuous mode (DMA transfer unlimited, whatever number of conversions).
-                                       Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached.
-                                       Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion).
-                                       This parameter can be set to ENABLE or DISABLE. */
+  uint32_t ClockPrescaler;               /*!< Select ADC clock prescaler. The clock is common for 
+                                              all the ADCs.
+                                              This parameter can be a value of @ref ADC_ClockPrescaler */
+  uint32_t Resolution;                   /*!< Configures the ADC resolution.
+                                              This parameter can be a value of @ref ADC_Resolution */
+  uint32_t DataAlign;                    /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting)
+                                              or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3).
+                                              This parameter can be a value of @ref ADC_Data_align */
+  uint32_t ScanConvMode;                 /*!< Configures the sequencer of regular and injected groups.
+                                              This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
+                                              If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
+                                                           Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
+                                              If enabled:  Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank).
+                                                           Scan direction is upward: from rank1 to rank 'n'.
+                                              This parameter can be set to ENABLE or DISABLE */
+  uint32_t EOCSelection;                 /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence.
+                                              This parameter can be a value of @ref ADC_EOCSelection.
+                                              Note: For injected group, end of conversion (flag&IT) is raised only at the end of the sequence.
+                                                    Therefore, if end of conversion is set to end of each conversion, injected group should not be used with interruption (HAL_ADCEx_InjectedStart_IT)
+                                                    or polling (HAL_ADCEx_InjectedStart and HAL_ADCEx_InjectedPollForConversion). By the way, polling is still possible since driver will use an estimated timing for end of injected conversion.
+                                              Note: If overrun feature is intended to be used, use ADC in mode 'interruption' (function HAL_ADC_Start_IT() ) with parameter EOCSelection set to end of each conversion or in mode 'transfer by DMA' (function HAL_ADC_Start_DMA()).
+                                                    If overrun feature is intended to be bypassed, use ADC in mode 'polling' or 'interruption' with parameter EOCSelection must be set to end of sequence */
+  FunctionalState ContinuousConvMode;    /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
+                                              after the selected trigger occurred (software start or external trigger).
+                                              This parameter can be set to ENABLE or DISABLE. */
+  uint32_t NbrOfConversion;              /*!< Specifies the number of ranks that will be converted within the regular group sequencer.
+                                              To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+                                              This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
+  FunctionalState DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+                                              Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+                                              Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+                                              This parameter can be set to ENABLE or DISABLE. */
+  uint32_t NbrOfDiscConversion;          /*!< Specifies the number of discontinuous conversions in which the  main sequence of regular group (parameter NbrOfConversion) will be subdivided.
+                                              If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
+                                              This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
+  uint32_t ExternalTrigConv;             /*!< Selects the external event used to trigger the conversion start of regular group.
+                                              If set to ADC_SOFTWARE_START, external triggers are disabled.
+                                              If set to external trigger source, triggering is on event rising edge by default.
+                                              This parameter can be a value of @ref ADC_External_trigger_Source_Regular */
+  uint32_t ExternalTrigConvEdge;         /*!< Selects the external trigger edge of regular group.
+                                              If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
+                                              This parameter can be a value of @ref ADC_External_trigger_edge_Regular */
+  FunctionalState DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached)
+											  or in Continuous mode (DMA transfer unlimited, whatever number of conversions).
+											  Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached.
+											  Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion).
+											  This parameter can be set to ENABLE or DISABLE. */
 }ADC_InitTypeDef;
 
 
@@ -160,7 +144,7 @@ typedef struct
   uint32_t Channel;           /*!< Configures ADC channel for the analog watchdog. 
                                    This parameter has an effect only if watchdog mode is configured on single channel 
                                    This parameter can be a value of @ref ADC_channels */      
-  uint32_t ITMode;            /*!< Specifies whether the analog watchdog is configured
+  FunctionalState ITMode;     /*!< Specifies whether the analog watchdog is configured
                                    is interrupt mode or in polling mode.
                                    This parameter can be set to ENABLE or DISABLE */
   uint32_t WatchdogNumber;    /*!< Reserved for future use, can be set to 0 */
@@ -203,7 +187,11 @@ typedef struct
 /** 
   * @brief  ADC handle Structure definition
   */ 
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+typedef struct __ADC_HandleTypeDef
+#else
 typedef struct
+#endif
 {
   ADC_TypeDef                   *Instance;                   /*!< Register base address */
 
@@ -218,7 +206,39 @@ typedef struct
   __IO uint32_t                 State;                       /*!< ADC communication state */
 
   __IO uint32_t                 ErrorCode;                   /*!< ADC Error code */
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+  void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc);              /*!< ADC conversion complete callback */
+  void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc);          /*!< ADC conversion DMA half-transfer callback */
+  void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc);      /*!< ADC analog watchdog 1 callback */
+  void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc);                 /*!< ADC error callback */
+  void (* InjectedConvCpltCallback)(struct __ADC_HandleTypeDef *hadc);      /*!< ADC group injected conversion complete callback */
+  void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc);               /*!< ADC Msp Init callback */
+  void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc);             /*!< ADC Msp DeInit callback */
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
 }ADC_HandleTypeDef;
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL ADC Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_ADC_CONVERSION_COMPLETE_CB_ID     = 0x00U,  /*!< ADC conversion complete callback ID */
+  HAL_ADC_CONVERSION_HALF_CB_ID         = 0x01U,  /*!< ADC conversion DMA half-transfer callback ID */
+  HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID   = 0x02U,  /*!< ADC analog watchdog 1 callback ID */
+  HAL_ADC_ERROR_CB_ID                   = 0x03U,  /*!< ADC error callback ID */
+  HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID = 0x04U,  /*!< ADC group injected conversion complete callback ID */
+  HAL_ADC_MSPINIT_CB_ID                 = 0x05U,  /*!< ADC Msp Init callback ID          */
+  HAL_ADC_MSPDEINIT_CB_ID               = 0x06U   /*!< ADC Msp DeInit callback ID        */
+} HAL_ADC_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL ADC Callback pointer definition
+  */
+typedef  void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */
+
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+
 /**
   * @}
   */
@@ -236,6 +256,9 @@ typedef struct
                                                enable/disable, erroneous state                       */
 #define HAL_ADC_ERROR_OVR         0x02U   /*!< Overrun error                                         */
 #define HAL_ADC_ERROR_DMA         0x04U   /*!< DMA transfer error                                    */
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+#define HAL_ADC_ERROR_INVALID_CALLBACK  (0x10U)   /*!< Invalid Callback error */
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
 /**
   * @}
   */
@@ -456,7 +479,17 @@ typedef struct
   * @param  __HANDLE__ ADC handle
   * @retval None
   */
-#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__)                               \
+  do{                                                                          \
+     (__HANDLE__)->State = HAL_ADC_STATE_RESET;                               \
+     (__HANDLE__)->MspInitCallback = NULL;                                     \
+     (__HANDLE__)->MspDeInitCallback = NULL;                                   \
+    } while(0)
+#else
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__)                               \
+  ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+#endif
 
 /**
   * @brief  Enable the ADC peripheral.
@@ -531,6 +564,12 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
 HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
 void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
 void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+/* Callbacks Register/UnRegister functions  ***********************************/
+HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, pADC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
 /**
   * @}
   */

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h

@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -71,58 +55,58 @@
   */
 typedef struct 
 {
-  uint32_t InjectedChannel;               /*!< Selection of ADC channel to configure
-                                               This parameter can be a value of @ref ADC_channels
-                                               Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
-  uint32_t InjectedRank;                  /*!< Rank in the injected group sequencer
-                                               This parameter must be a value of @ref ADCEx_injected_rank
-                                               Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
-  uint32_t InjectedSamplingTime;          /*!< Sampling time value to be set for the selected channel.
-                                               Unit: ADC clock cycles
-                                               Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
-                                               This parameter can be a value of @ref ADC_sampling_times
-                                               Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
-                                                        If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
-                                               Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
-                                                     sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
-                                                     Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
-  uint32_t InjectedOffset;                /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
-                                               Offset value must be a positive number.
-                                               Depending of ADC resolution selected (12, 10, 8 or 6 bits),
-                                               this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
-  uint32_t InjectedNbrOfConversion;       /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
-                                               To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
-                                               This parameter must be a number between Min_Data = 1 and Max_Data = 4.
-                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 
-                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
-  uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
-                                               Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
-                                               Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
-                                               This parameter can be set to ENABLE or DISABLE.
-                                               Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
-                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 
-                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
-  uint32_t AutoInjectedConv;              /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
-                                               This parameter can be set to ENABLE or DISABLE.      
-                                               Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
-                                               Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
-                                               Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
-                                                     To maintain JAUTO always enabled, DMA must be configured in circular mode.
-                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
-                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
-  uint32_t ExternalTrigInjecConv;         /*!< Selects the external event used to trigger the conversion start of injected group.
-                                               If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
-                                               If set to external trigger source, triggering is on event rising edge.
-                                               This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected
-                                               Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
-                                                     If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
-                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
-                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
-  uint32_t ExternalTrigInjecConvEdge;     /*!< Selects the external trigger edge of injected group.
-                                               This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected.
-                                               If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.
-                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 
-                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t InjectedChannel;                      /*!< Selection of ADC channel to configure
+                                                      This parameter can be a value of @ref ADC_channels
+                                                      Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+  uint32_t InjectedRank;                         /*!< Rank in the injected group sequencer
+                                                      This parameter must be a value of @ref ADCEx_injected_rank
+                                                      Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+  uint32_t InjectedSamplingTime;                 /*!< Sampling time value to be set for the selected channel.
+                                                      Unit: ADC clock cycles
+                                                      Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
+                                                      This parameter can be a value of @ref ADC_sampling_times
+                                                      Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+                                                               If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+                                                      Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+                                                            sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+                                                            Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
+  uint32_t InjectedOffset;                       /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
+                                                      Offset value must be a positive number.
+                                                      Depending of ADC resolution selected (12, 10, 8 or 6 bits),
+                                                      this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+  uint32_t InjectedNbrOfConversion;              /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
+                                                      To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+                                                      This parameter must be a number between Min_Data = 1 and Max_Data = 4.
+                                                      Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 
+                                                               configure a channel on injected group can impact the configuration of other channels previously set. */
+  FunctionalState InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+                                                      Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+                                                      Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+                                                      This parameter can be set to ENABLE or DISABLE.
+                                                      Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
+                                                      Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 
+                                                               configure a channel on injected group can impact the configuration of other channels previously set. */
+  FunctionalState AutoInjectedConv;              /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
+                                                      This parameter can be set to ENABLE or DISABLE.      
+                                                      Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
+                                                      Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
+                                                      Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
+                                                            To maintain JAUTO always enabled, DMA must be configured in circular mode.
+                                                      Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                               configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t ExternalTrigInjecConv;                /*!< Selects the external event used to trigger the conversion start of injected group.
+                                                      If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
+                                                      If set to external trigger source, triggering is on event rising edge.
+                                                      This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected
+                                                      Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+                                                            If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
+                                                      Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                               configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t ExternalTrigInjecConvEdge;            /*!< Selects the external trigger edge of injected group.
+                                                      This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected.
+                                                      If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.
+                                                      Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 
+                                                               configure a channel on injected group can impact the configuration of other channels previously set. */
 }ADC_InjectionConfTypeDef; 
 
 /** 
@@ -235,15 +219,11 @@ typedef struct
 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F412Zx ||
           STM32F412Vx || STM32F412Rx || STM32F412Cx */
 
-#if defined(STM32F413xx) || defined(STM32F423xx)
-#define ADC_CHANNEL_TEMPSENSOR  ((uint32_t)ADC_CHANNEL_18)
-#endif /* STM32F413xx || STM32F423xx */
-
-#if defined(STM32F411xE) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
-    defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) 
+#if defined(STM32F411xE) || defined(STM32F413xx) || defined(STM32F423xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+    defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) 
 #define ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT 0x10000000U /* Dummy bit for driver internal usage, not used in ADC channel setting registers CR1 or SQRx */
 #define ADC_CHANNEL_TEMPSENSOR  ((uint32_t)ADC_CHANNEL_18 | ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT)
-#endif /* STM32F411xE || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* STM32F411xE || STM32F413xx || STM32F423xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
 /**
   * @}
   */ 

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h

@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h

@@ -7,29 +7,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -45,7 +29,7 @@
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f4xx.h"
 #include "Legacy/stm32_hal_legacy.h"
-#include <stdio.h>
+#include <stddef.h>
 
 /* Exported types ------------------------------------------------------------*/
 
@@ -75,8 +59,8 @@ typedef enum
 
 #define HAL_MAX_DELAY      0xFFFFFFFFU
 
-#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) != RESET)
-#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == RESET)
+#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) == (BIT))
+#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == 0U)
 
 #define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__)               \
                         do{                                                      \

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h

@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h

@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h

@@ -0,0 +1,264 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_exti.h
+  * @author  MCD Application Team
+  * @brief   Header file of EXTI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32f4xx_HAL_EXTI_H
+#define STM32f4xx_HAL_EXTI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup EXTI EXTI
+  * @brief EXTI HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup EXTI_Exported_Types EXTI Exported Types
+  * @{
+  */
+typedef enum
+{
+  HAL_EXTI_COMMON_CB_ID          = 0x00U,
+  HAL_EXTI_RISING_CB_ID          = 0x01U,
+  HAL_EXTI_FALLING_CB_ID         = 0x02U,
+} EXTI_CallbackIDTypeDef;
+
+/**
+  * @brief  EXTI Handle structure definition
+  */
+typedef struct
+{
+  uint32_t Line;                    /*!<  Exti line number */
+  void (* RisingCallback)(void);    /*!<  Exti rising callback */
+  void (* FallingCallback)(void);   /*!<  Exti falling callback */
+} EXTI_HandleTypeDef;
+
+/**
+  * @brief  EXTI Configuration structure definition
+  */
+typedef struct
+{
+  uint32_t Line;      /*!< The Exti line to be configured. This parameter
+                           can be a value of @ref EXTI_Line */
+  uint32_t Mode;      /*!< The Exit Mode to be configured for a core.
+                           This parameter can be a combination of @ref EXTI_Mode */
+  uint32_t Trigger;   /*!< The Exti Trigger to be configured. This parameter
+                           can be a value of @ref EXTI_Trigger */  
+} EXTI_ConfigTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
+  * @{
+  */
+
+/** @defgroup EXTI_Line  EXTI Line
+  * @{
+  */
+#define EXTI_LINE_0                        EXTI_IMR_IM0     /*!< External interrupt line 0 */
+#define EXTI_LINE_1                        EXTI_IMR_IM1     /*!< External interrupt line 1 */
+#define EXTI_LINE_2                        EXTI_IMR_IM2     /*!< External interrupt line 2 */
+#define EXTI_LINE_3                        EXTI_IMR_IM3     /*!< External interrupt line 3 */
+#define EXTI_LINE_4                        EXTI_IMR_IM4     /*!< External interrupt line 4 */
+#define EXTI_LINE_5                        EXTI_IMR_IM5     /*!< External interrupt line 5 */
+#define EXTI_LINE_6                        EXTI_IMR_IM6     /*!< External interrupt line 6 */
+#define EXTI_LINE_7                        EXTI_IMR_IM7     /*!< External interrupt line 7 */
+#define EXTI_LINE_8                        EXTI_IMR_IM8     /*!< External interrupt line 8 */
+#define EXTI_LINE_9                        EXTI_IMR_IM9     /*!< External interrupt line 9 */
+#define EXTI_LINE_10                       EXTI_IMR_IM10    /*!< External interrupt line 10 */
+#define EXTI_LINE_11                       EXTI_IMR_IM11    /*!< External interrupt line 11 */
+#define EXTI_LINE_12                       EXTI_IMR_IM12    /*!< External interrupt line 12 */
+#define EXTI_LINE_13                       EXTI_IMR_IM13    /*!< External interrupt line 13 */
+#define EXTI_LINE_14                       EXTI_IMR_IM14    /*!< External interrupt line 14 */
+#define EXTI_LINE_15                       EXTI_IMR_IM15    /*!< External interrupt line 15 */
+#define EXTI_LINE_16                       EXTI_IMR_IM16    /*!< External interrupt line 16 Connected to the PVD Output */
+#define EXTI_LINE_17                       EXTI_IMR_IM17    /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#define EXTI_LINE_18                       EXTI_IMR_IM18    /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */                                    
+#define EXTI_LINE_19                       EXTI_IMR_IM19    /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
+#define EXTI_LINE_20                       EXTI_IMR_IM20    /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event  */
+#define EXTI_LINE_21                       EXTI_IMR_IM21    /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */                                               
+#define EXTI_LINE_22                       EXTI_IMR_IM22    /*!< External interrupt line 22 Connected to the RTC Wakeup event */
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Mode  EXTI Mode
+  * @{
+  */
+#define EXTI_MODE_INTERRUPT                 0x00000000U
+#define EXTI_MODE_EVENT                     0x00000004U
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Trigger  EXTI Trigger
+  * @{
+  */
+
+#define EXTI_TRIGGER_RISING                 0x00000008U
+#define EXTI_TRIGGER_FALLING                0x0000000CU
+#define EXTI_TRIGGER_RISING_FALLING         0x00000010U
+/**
+  * @}
+  */
+    
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants --------------------------------------------------------*/
+/** @defgroup EXTI_Private_Constants EXTI Private Constants
+  * @{
+  */
+/**
+  * @brief  EXTI Mask for interrupt & event mode
+  */
+#define EXTI_MODE_MASK                      (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
+
+/**
+  * @brief  EXTI Mask for trigger possibilities
+  */
+#define EXTI_TRIGGER_MASK                   (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING | EXTI_TRIGGER_RISING_FALLING)
+
+/**
+  * @brief  EXTI Line number
+  */
+#define EXTI_LINE_NB                        23UL
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup EXTI_Private_Macros EXTI Private Macros
+  * @{
+  */
+#define IS_EXTI_LINE(__LINE__)  (((__LINE__) == EXTI_LINE_0) || \
+                                 ((__LINE__) == EXTI_LINE_1) || \
+                                 ((__LINE__) == EXTI_LINE_2) || \
+                                 ((__LINE__) == EXTI_LINE_3) || \
+                                 ((__LINE__) == EXTI_LINE_4) || \
+                                 ((__LINE__) == EXTI_LINE_5) || \
+                                 ((__LINE__) == EXTI_LINE_6) || \
+                                 ((__LINE__) == EXTI_LINE_7) || \
+                                 ((__LINE__) == EXTI_LINE_8) || \
+                                 ((__LINE__) == EXTI_LINE_9) || \
+                                 ((__LINE__) == EXTI_LINE_10) || \
+                                 ((__LINE__) == EXTI_LINE_11) || \
+                                 ((__LINE__) == EXTI_LINE_12) || \
+                                 ((__LINE__) == EXTI_LINE_13) || \
+                                 ((__LINE__) == EXTI_LINE_14) || \
+                                 ((__LINE__) == EXTI_LINE_15) || \
+                                 ((__LINE__) == EXTI_LINE_16) || \
+                                 ((__LINE__) == EXTI_LINE_17) || \
+                                 ((__LINE__) == EXTI_LINE_18) || \
+                                 ((__LINE__) == EXTI_LINE_19) || \
+                                 ((__LINE__) == EXTI_LINE_20) || \
+                                 ((__LINE__) == EXTI_LINE_21) || \
+                                 ((__LINE__) == EXTI_LINE_22))
+
+#define IS_EXTI_MODE(__LINE__)          ((((__LINE__) & ~EXTI_MODE_MASK) == 0x00U))
+
+#define IS_EXTI_TRIGGER(__LINE__)       (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00U)
+
+#define IS_EXTI_PENDING_EDGE(__LINE__)  (((__LINE__) == EXTI_TRIGGER_FALLING) || \
+                                         ((__LINE__) == EXTI_TRIGGER_RISING) || \
+                                         ((__LINE__) == EXTI_TRIGGER_RISING_FALLING))
+
+#define IS_EXTI_GPIO_PIN(__PIN__)       ((__PIN__) < 16U)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
+  * @brief    EXTI Exported Functions
+  * @{
+  */
+
+/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
+  * @brief    Configuration functions
+  * @{
+  */
+/* Configuration functions ****************************************************/
+HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
+HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
+HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
+  * @brief    IO operation functions
+  * @{
+  */
+/* IO operation functions *****************************************************/
+void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
+uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32f4xx_HAL_EXTI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h

@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h

@@ -1,246 +1,234 @@
 /**
- ******************************************************************************
- * @file    stm32f4xx_hal_flash_ex.h
- * @author  MCD Application Team
- * @brief   Header file of FLASH HAL Extension module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of FLASH HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
 
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F4xx_HAL_FLASH_EX_H
 #define __STM32F4xx_HAL_FLASH_EX_H
 
 #ifdef __cplusplus
-extern "C" {
+ extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f4xx_hal_def.h"
 
 /** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
+  * @{
+  */
 
 /** @addtogroup FLASHEx
- * @{
- */
+  * @{
+  */ 
 
 /* Exported types ------------------------------------------------------------*/
 /** @defgroup FLASHEx_Exported_Types FLASH Exported Types
- * @{
- */
+  * @{
+  */
 
 /**
- * @brief  FLASH Erase structure definition
- */
-typedef struct {
-	uint32_t TypeErase; /*!< Mass erase or sector Erase.
-	 This parameter can be a value of @ref FLASHEx_Type_Erase */
+  * @brief  FLASH Erase structure definition
+  */
+typedef struct
+{
+  uint32_t TypeErase;   /*!< Mass erase or sector Erase.
+                             This parameter can be a value of @ref FLASHEx_Type_Erase */
 
-	uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled.
-	 This parameter must be a value of @ref FLASHEx_Banks */
+  uint32_t Banks;       /*!< Select banks to erase when Mass erase is enabled.
+                             This parameter must be a value of @ref FLASHEx_Banks */
 
-	uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled
-	 This parameter must be a value of @ref FLASHEx_Sectors */
+  uint32_t Sector;      /*!< Initial FLASH sector to erase when Mass erase is disabled
+                             This parameter must be a value of @ref FLASHEx_Sectors */
 
-	uint32_t NbSectors; /*!< Number of sectors to be erased.
-	 This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
+  uint32_t NbSectors;   /*!< Number of sectors to be erased.
+                             This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
 
-	uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
-	 This parameter must be a value of @ref FLASHEx_Voltage_Range */
+  uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
+                             This parameter must be a value of @ref FLASHEx_Voltage_Range */
 
 } FLASH_EraseInitTypeDef;
 
 /**
- * @brief  FLASH Option Bytes Program structure definition
- */
-typedef struct {
-	uint32_t OptionType; /*!< Option byte to be configured.
-	 This parameter can be a value of @ref FLASHEx_Option_Type */
+  * @brief  FLASH Option Bytes Program structure definition
+  */
+typedef struct
+{
+  uint32_t OptionType;   /*!< Option byte to be configured.
+                              This parameter can be a value of @ref FLASHEx_Option_Type */
 
-	uint32_t WRPState; /*!< Write protection activation or deactivation.
-	 This parameter can be a value of @ref FLASHEx_WRP_State */
+  uint32_t WRPState;     /*!< Write protection activation or deactivation.
+                              This parameter can be a value of @ref FLASHEx_WRP_State */
 
-	uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected.
-	 The value of this parameter depend on device used within the same series */
+  uint32_t WRPSector;         /*!< Specifies the sector(s) to be write protected.
+                              The value of this parameter depend on device used within the same series */
 
-	uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors.
-	 This parameter must be a value of @ref FLASHEx_Banks */
+  uint32_t Banks;        /*!< Select banks for WRP activation/deactivation of all sectors.
+                              This parameter must be a value of @ref FLASHEx_Banks */        
 
-	uint32_t RDPLevel; /*!< Set the read protection level.
-	 This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
+  uint32_t RDPLevel;     /*!< Set the read protection level.
+                              This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
 
-	uint32_t BORLevel; /*!< Set the BOR Level.
-	 This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
+  uint32_t BORLevel;     /*!< Set the BOR Level.
+                              This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
 
-	uint8_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */
+  uint8_t  USERConfig;   /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */
 
 } FLASH_OBProgramInitTypeDef;
 
 /**
- * @brief  FLASH Advanced Option Bytes Program structure definition
- */
+  * @brief  FLASH Advanced Option Bytes Program structure definition
+  */
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
     defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
     defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
     defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
     defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
-typedef struct {
-	uint32_t OptionType; /*!< Option byte to be configured for extension.
-	 This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */
+typedef struct
+{
+  uint32_t OptionType;     /*!< Option byte to be configured for extension.
+                                This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */
 
-	uint32_t PCROPState; /*!< PCROP activation or deactivation.
-	 This parameter can be a value of @ref FLASHEx_PCROP_State */
+  uint32_t PCROPState;     /*!< PCROP activation or deactivation.
+                                This parameter can be a value of @ref FLASHEx_PCROP_State */
 
 #if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
     defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
-	uint16_t Sectors; /*!< specifies the sector(s) set for PCROP.
-	 This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+  uint16_t Sectors;        /*!< specifies the sector(s) set for PCROP.
+                                This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
 #endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx ||\
           STM32F412Cx || STM32F413xx || STM32F423xx */
 
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
-uint32_t Banks; /*!< Select banks for PCROP activation/deactivation of all sectors.
- This parameter must be a value of @ref FLASHEx_Banks */
+  uint32_t Banks;          /*!< Select banks for PCROP activation/deactivation of all sectors.
+                                This parameter must be a value of @ref FLASHEx_Banks */
 
-uint16_t SectorsBank1; /*!< Specifies the sector(s) set for PCROP for Bank1.
- This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+  uint16_t SectorsBank1;   /*!< Specifies the sector(s) set for PCROP for Bank1.
+                                This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
 
-uint16_t SectorsBank2; /*!< Specifies the sector(s) set for PCROP for Bank2.
- This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+  uint16_t SectorsBank2;   /*!< Specifies the sector(s) set for PCROP for Bank2.
+                                This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
 
-uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
- This parameter can be a value of @ref FLASHEx_Dual_Boot */
+  uint8_t BootConfig;      /*!< Specifies Option bytes for boot config.
+                                This parameter can be a value of @ref FLASHEx_Dual_Boot */
 
 #endif /*STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
-} FLASH_AdvOBProgramInitTypeDef;
+}FLASH_AdvOBProgramInitTypeDef;
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx ||
           STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
 /**
- * @}
- */
+  * @}
+  */
 
 /* Exported constants --------------------------------------------------------*/
 
 /** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
- * @{
- */
+  * @{
+  */
 
 /** @defgroup FLASHEx_Type_Erase FLASH Type Erase
- * @{
- */
+  * @{
+  */ 
 #define FLASH_TYPEERASE_SECTORS         0x00000000U  /*!< Sectors erase only          */
 #define FLASH_TYPEERASE_MASSERASE       0x00000001U  /*!< Flash Mass erase activation */
 /**
- * @}
- */
-
+  * @}
+  */
+  
 /** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
- * @{
- */
+  * @{
+  */ 
 #define FLASH_VOLTAGE_RANGE_1        0x00000000U  /*!< Device operating range: 1.8V to 2.1V                */
 #define FLASH_VOLTAGE_RANGE_2        0x00000001U  /*!< Device operating range: 2.1V to 2.7V                */
 #define FLASH_VOLTAGE_RANGE_3        0x00000002U  /*!< Device operating range: 2.7V to 3.6V                */
 #define FLASH_VOLTAGE_RANGE_4        0x00000003U  /*!< Device operating range: 2.7V to 3.6V + External Vpp */
 /**
- * @}
- */
-
+  * @}
+  */
+  
 /** @defgroup FLASHEx_WRP_State FLASH WRP State
- * @{
- */
+  * @{
+  */ 
 #define OB_WRPSTATE_DISABLE       0x00000000U  /*!< Disable the write protection of the desired bank 1 sectors */
 #define OB_WRPSTATE_ENABLE        0x00000001U  /*!< Enable the write protection of the desired bank 1 sectors  */
 /**
- * @}
- */
-
+  * @}
+  */
+  
 /** @defgroup FLASHEx_Option_Type FLASH Option Type
- * @{
- */
+  * @{
+  */ 
 #define OPTIONBYTE_WRP        0x00000001U  /*!< WRP option byte configuration  */
 #define OPTIONBYTE_RDP        0x00000002U  /*!< RDP option byte configuration  */
 #define OPTIONBYTE_USER       0x00000004U  /*!< USER option byte configuration */
 #define OPTIONBYTE_BOR        0x00000008U  /*!< BOR option byte configuration  */
 /**
- * @}
- */
-
+  * @}
+  */
+  
 /** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
- * @{
- */
+  * @{
+  */
 #define OB_RDP_LEVEL_0   ((uint8_t)0xAA)
 #define OB_RDP_LEVEL_1   ((uint8_t)0x55)
 #define OB_RDP_LEVEL_2   ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2 
                                               it s no more possible to go back to level 1 or 0 */
 /**
- * @}
- */
-
+  * @}
+  */ 
+  
 /** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
- * @{
- */
+  * @{
+  */ 
 #define OB_IWDG_SW                     ((uint8_t)0x20)  /*!< Software IWDG selected */
 #define OB_IWDG_HW                     ((uint8_t)0x00)  /*!< Hardware IWDG selected */
 /**
- * @}
- */
-
+  * @}
+  */ 
+  
 /** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
- * @{
- */
+  * @{
+  */ 
 #define OB_STOP_NO_RST                 ((uint8_t)0x40) /*!< No reset generated when entering in STOP */
 #define OB_STOP_RST                    ((uint8_t)0x00) /*!< Reset generated when entering in STOP    */
 /**
- * @}
- */
+  * @}
+  */ 
+
 
 /** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
- * @{
- */
+  * @{
+  */ 
 #define OB_STDBY_NO_RST                ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */
 #define OB_STDBY_RST                   ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY    */
 /**
- * @}
- */
+  * @}
+  */    
 
 /** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
- * @{
- */
+  * @{
+  */  
 #define OB_BOR_LEVEL3          ((uint8_t)0x00)  /*!< Supply voltage ranges from 2.70 to 3.60 V */
 #define OB_BOR_LEVEL2          ((uint8_t)0x04)  /*!< Supply voltage ranges from 2.40 to 2.70 V */
 #define OB_BOR_LEVEL1          ((uint8_t)0x08)  /*!< Supply voltage ranges from 2.10 to 2.40 V */
 #define OB_BOR_OFF             ((uint8_t)0x0C)  /*!< Supply voltage ranges from 1.62 to 2.10 V */
 /**
- * @}
- */
+  * @}
+  */
 
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
     defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
@@ -248,20 +236,20 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
     defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
     defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
 /** @defgroup FLASHEx_PCROP_State FLASH PCROP State
- * @{
- */
+  * @{
+  */ 
 #define OB_PCROP_STATE_DISABLE       0x00000000U  /*!< Disable PCROP */
 #define OB_PCROP_STATE_ENABLE        0x00000001U  /*!< Enable PCROP  */
 /**
- * @}
- */
+  * @}
+  */
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
           STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
           STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
 
 /** @defgroup FLASHEx_Advanced_Option_Type FLASH Advanced Option Type
- * @{
- */
+  * @{
+  */ 
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
     defined(STM32F469xx) || defined(STM32F479xx)
 #define OPTIONBYTE_PCROP        0x00000001U  /*!< PCROP option byte configuration      */
@@ -276,13 +264,13 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx ||
           STM32F413xx || STM32F423xx */
 /**
- * @}
- */
+  * @}
+  */
 
 /** @defgroup FLASH_Latency FLASH Latency
- * @{
- */
-/*------------------------- STM32F42xxx/STM32F43xxx/STM32F446xx/STM32F469xx/STM32F479xx ----------------------*/
+  * @{
+  */
+/*------------------------- STM32F42xxx/STM32F43xxx/STM32F446xx/STM32F469xx/STM32F479xx ----------------------*/  
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
     defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
 #define FLASH_LATENCY_0                FLASH_ACR_LATENCY_0WS   /*!< FLASH Zero Latency cycle      */
@@ -304,12 +292,12 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
 /*--------------------------------------------------------------------------------------------------------------*/
 
-/*-------------------------- STM32F40xxx/STM32F41xxx/STM32F401xx/STM32F411xx/STM32F423xx -----------------------*/
+/*-------------------------- STM32F40xxx/STM32F41xxx/STM32F401xx/STM32F411xx/STM32F423xx -----------------------*/ 
 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
     defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
     defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
     defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
-
+     
 #define FLASH_LATENCY_0                FLASH_ACR_LATENCY_0WS   /*!< FLASH Zero Latency cycle      */
 #define FLASH_LATENCY_1                FLASH_ACR_LATENCY_1WS   /*!< FLASH One Latency cycle       */
 #define FLASH_LATENCY_2                FLASH_ACR_LATENCY_2WS   /*!< FLASH Two Latency cycles      */
@@ -323,12 +311,13 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 /*--------------------------------------------------------------------------------------------------------------*/
 
 /**
- * @}
- */
+  * @}
+  */ 
+  
 
 /** @defgroup FLASHEx_Banks FLASH Banks
- * @{
- */
+  * @{
+  */
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
     defined(STM32F469xx) || defined(STM32F479xx)
 #define FLASH_BANK_1     1U /*!< Bank 1   */
@@ -345,12 +334,12 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx
           STM32F413xx || STM32F423xx */
 /**
- * @}
- */
-
+  * @}
+  */ 
+    
 /** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
- * @{
- */
+  * @{
+  */
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
     defined(STM32F469xx) || defined(STM32F479xx)
 #define FLASH_MER_BIT     (FLASH_CR_MER1 | FLASH_CR_MER2) /*!< 2 MER bits here to clear */
@@ -365,13 +354,13 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx
           STM32F413xx || STM32F423xx */
 /**
- * @}
- */
+  * @}
+  */ 
 
 /** @defgroup FLASHEx_Sectors FLASH Sectors
- * @{
- */
-/*-------------------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx ------------------------------------*/
+  * @{
+  */
+/*-------------------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx ------------------------------------*/   
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
     defined(STM32F469xx) || defined(STM32F479xx)
 #define FLASH_SECTOR_0     0U  /*!< Sector Number 0   */
@@ -401,7 +390,7 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
 /*-----------------------------------------------------------------------------------------------------*/
 
-/*-------------------------------------- STM32F413xx/STM32F423xx --------------------------------------*/
+/*-------------------------------------- STM32F413xx/STM32F423xx --------------------------------------*/   
 #if defined(STM32F413xx) || defined(STM32F423xx)
 #define FLASH_SECTOR_0     0U  /*!< Sector Number 0   */
 #define FLASH_SECTOR_1     1U  /*!< Sector Number 1   */
@@ -420,9 +409,9 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #define FLASH_SECTOR_14    14U /*!< Sector Number 14  */
 #define FLASH_SECTOR_15    15U /*!< Sector Number 15  */
 #endif /* STM32F413xx || STM32F423xx */
-/*-----------------------------------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------------------------------*/      
 
-/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/ 
 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
     defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)  
 #define FLASH_SECTOR_0     0U  /*!< Sector Number 0   */
@@ -440,7 +429,7 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
 /*-----------------------------------------------------------------------------------------------------*/
 
-/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/ 
 #if defined(STM32F401xC)
 #define FLASH_SECTOR_0     0U /*!< Sector Number 0   */
 #define FLASH_SECTOR_1     1U /*!< Sector Number 1   */
@@ -451,7 +440,7 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #endif /* STM32F401xC */
 /*-----------------------------------------------------------------------------------------------------*/
 
-/*--------------------------------------------- STM32F410xx -------------------------------------------*/
+/*--------------------------------------------- STM32F410xx -------------------------------------------*/ 
 #if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
 #define FLASH_SECTOR_0     0U /*!< Sector Number 0   */
 #define FLASH_SECTOR_1     1U /*!< Sector Number 1   */
@@ -475,13 +464,13 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 /*-----------------------------------------------------------------------------------------------------*/
 
 /**
- * @}
- */
+  * @}
+  */ 
 
 /** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
- * @{
- */
-/*--------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx -------------------------*/
+  * @{
+  */
+/*--------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx -------------------------*/  
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
     defined(STM32F469xx) || defined(STM32F479xx) 
 #define OB_WRP_SECTOR_0       0x00000001U /*!< Write protection of Sector0     */
@@ -512,7 +501,7 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
 /*-----------------------------------------------------------------------------------------------------*/
 
-/*--------------------------------------- STM32F413xx/STM32F423xx -------------------------------------*/
+/*--------------------------------------- STM32F413xx/STM32F423xx -------------------------------------*/ 
 #if defined(STM32F413xx) || defined(STM32F423xx)  
 #define OB_WRP_SECTOR_0       0x00000001U /*!< Write protection of Sector0     */
 #define OB_WRP_SECTOR_1       0x00000002U /*!< Write protection of Sector1     */
@@ -532,9 +521,9 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #define OB_WRP_SECTOR_15      0x00004000U /*!< Write protection of Sector15    */      
 #define OB_WRP_SECTOR_All     0x00007FFFU /*!< Write protection of all Sectors */
 #endif /* STM32F413xx || STM32F423xx */
-/*-----------------------------------------------------------------------------------------------------*/
-
-/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+/*-----------------------------------------------------------------------------------------------------*/    
+      
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/ 
 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
     defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)  
 #define OB_WRP_SECTOR_0       0x00000001U /*!< Write protection of Sector0     */
@@ -564,7 +553,7 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #define OB_WRP_SECTOR_All     0x00000FFFU /*!< Write protection of all Sectors */
 #endif /* STM32F401xC */
 /*-----------------------------------------------------------------------------------------------------*/
-
+ 
 /*--------------------------------------------- STM32F410xx -------------------------------------------*/
 #if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
 #define OB_WRP_SECTOR_0       0x00000001U /*!< Write protection of Sector0     */
@@ -590,13 +579,13 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #endif /* STM32F401xE || STM32F411xE || STM32F446xx */
 /*-----------------------------------------------------------------------------------------------------*/
 /**
- * @}
- */
-
+  * @}
+  */
+  
 /** @defgroup FLASHEx_Option_Bytes_PC_ReadWrite_Protection FLASH Option Bytes PC ReadWrite Protection
- * @{
- */
-/*-------------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx ---------------------------*/
+  * @{
+  */
+/*-------------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx ---------------------------*/   
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
     defined(STM32F469xx) || defined(STM32F479xx) 
 #define OB_PCROP_SECTOR_0        0x00000001U /*!< PC Read/Write protection of Sector0      */
@@ -626,7 +615,7 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #define OB_PCROP_SECTOR_All      0x00000FFFU /*!< PC Read/Write protection of all Sectors  */
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
 /*-----------------------------------------------------------------------------------------------------*/
-
+      
 /*------------------------------------- STM32F413xx/STM32F423xx ---------------------------------------*/
 #if defined(STM32F413xx) || defined(STM32F423xx)  
 #define OB_PCROP_SECTOR_0        0x00000001U /*!< PC Read/Write protection of Sector0      */
@@ -647,7 +636,7 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 #define OB_PCROP_SECTOR_15       0x00004000U /*!< PC Read/Write protection of Sector15     */      
 #define OB_PCROP_SECTOR_All      0x00007FFFU /*!< PC Read/Write protection of all Sectors  */
 #endif /* STM32F413xx || STM32F423xx */
-/*-----------------------------------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------------------------------*/      
 
 /*--------------------------------------------- STM32F401xC -------------------------------------------*/
 #if defined(STM32F401xC)
@@ -688,24 +677,24 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
 /*-----------------------------------------------------------------------------------------------------*/
 
 /**
- * @}
- */
-
+  * @}
+  */
+  
 /** @defgroup FLASHEx_Dual_Boot FLASH Dual Boot
- * @{
- */
+  * @{
+  */
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
     defined(STM32F469xx) || defined(STM32F479xx) 
 #define OB_DUAL_BOOT_ENABLE   ((uint8_t)0x10) /*!< Dual Bank Boot Enable                             */
 #define OB_DUAL_BOOT_DISABLE  ((uint8_t)0x00) /*!< Dual Bank Boot Disable, always boot on User Flash */
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
 /**
- * @}
- */
+  * @}
+  */
 
 /** @defgroup  FLASHEx_Selection_Protection_Mode FLASH Selection Protection Mode
- * @{
- */
+  * @{
+  */
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
     defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
     defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
@@ -717,38 +706,36 @@ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
           STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
           STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
 /**
- * @}
- */
+  * @}
+  */
 
 /**
- * @}
- */
-
+  * @}
+  */ 
+  
 /* Exported macro ------------------------------------------------------------*/
 
 /* Exported functions --------------------------------------------------------*/
 /** @addtogroup FLASHEx_Exported_Functions
- * @{
- */
+  * @{
+  */
 
 /** @addtogroup FLASHEx_Exported_Functions_Group1
- * @{
- */
+  * @{
+  */
 /* Extension Program operation functions  *************************************/
-HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit,
-	uint32_t *SectorError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
 HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
 HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
-void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+void              HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
 
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
     defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
     defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
     defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
     defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
-HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram(
-	FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
-void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
+HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
+void              HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
 HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void);
 HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void);
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
@@ -757,22 +744,22 @@ HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void);
 
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
     defined(STM32F469xx) || defined(STM32F479xx)
-uint16_t HAL_FLASHEx_OB_GetBank2WRP(void);
+uint16_t          HAL_FLASHEx_OB_GetBank2WRP(void);
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
 /**
- * @}
- */
+  * @}
+  */
 
 /**
- * @}
- */
+  * @}
+  */
 /* Private types -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private constants ---------------------------------------------------------*/
 /** @defgroup FLASHEx_Private_Constants FLASH Private Constants
- * @{
- */
-/*--------------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx---------------------*/
+  * @{
+  */
+/*--------------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx---------------------*/ 
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
 #define FLASH_SECTOR_TOTAL  24U
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
@@ -782,18 +769,18 @@ uint16_t HAL_FLASHEx_OB_GetBank2WRP(void);
 #define FLASH_SECTOR_TOTAL  16U
 #endif /* STM32F413xx || STM32F423xx */
 
-/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/ 
 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
     defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)  
 #define FLASH_SECTOR_TOTAL  12U
 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
 
-/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/ 
 #if defined(STM32F401xC)
 #define FLASH_SECTOR_TOTAL  6U
 #endif /* STM32F401xC */
 
-/*--------------------------------------------- STM32F410xx -------------------------------------------*/
+/*--------------------------------------------- STM32F410xx -------------------------------------------*/ 
 #if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
 #define FLASH_SECTOR_TOTAL  5U
 #endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
@@ -804,24 +791,24 @@ uint16_t HAL_FLASHEx_OB_GetBank2WRP(void);
 #endif /* STM32F401xE || STM32F411xE || STM32F446xx */
 
 /** 
- * @brief OPTCR1 register byte 2 (Bits[23:16]) base address  
- */
+  * @brief OPTCR1 register byte 2 (Bits[23:16]) base address  
+  */ 
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)  
 #define OPTCR1_BYTE2_ADDRESS         0x40023C1AU
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
 
 /**
- * @}
- */
+  * @}
+  */
 
 /* Private macros ------------------------------------------------------------*/
 /** @defgroup FLASHEx_Private_Macros FLASH Private Macros
- * @{
- */
+  * @{
+  */
 
 /** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters
- * @{
- */
+  * @{
+  */
 
 #define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \
                                   ((VALUE) == FLASH_TYPEERASE_MASSERASE))  
@@ -873,7 +860,7 @@ uint16_t HAL_FLASHEx_OB_GetBank2WRP(void);
 #define IS_OBEX(VALUE)(((VALUE) == OPTIONBYTE_PCROP))  
 #endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx ||\
           STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
-
+  
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
     defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
 #define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0)  || \
@@ -923,7 +910,7 @@ uint16_t HAL_FLASHEx_OB_GetBank2WRP(void);
 #define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1))
 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx ||\
           STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
-
+ 
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
 #define IS_FLASH_SECTOR(SECTOR) ( ((SECTOR) == FLASH_SECTOR_0)   || ((SECTOR) == FLASH_SECTOR_1)   ||\
                                   ((SECTOR) == FLASH_SECTOR_2)   || ((SECTOR) == FLASH_SECTOR_3)   ||\
@@ -983,7 +970,7 @@ uint16_t HAL_FLASHEx_OB_GetBank2WRP(void);
                                    (((ADDRESS) >= FLASH_OTP_BASE) && ((ADDRESS) <= FLASH_OTP_END)))
 
 #define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
-
+  
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) 
 #define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFF000000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
@@ -1008,7 +995,7 @@ uint16_t HAL_FLASHEx_OB_GetBank2WRP(void);
     defined(STM32F412Rx) || defined(STM32F412Cx)  
 #define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
 #endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
-
+   
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
 #define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
@@ -1045,30 +1032,30 @@ uint16_t HAL_FLASHEx_OB_GetBank2WRP(void);
           STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
           STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
 /**
- * @}
- */
+  * @}
+  */
 
 /**
- * @}
- */
+  * @}
+  */
 
 /* Private functions ---------------------------------------------------------*/
 /** @defgroup FLASHEx_Private_Functions FLASH Private Functions
- * @{
- */
+  * @{
+  */
 void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
 void FLASH_FlushCaches(void);
 /**
- * @}
- */
+  * @}
+  */ 
 
 /**
- * @}
- */
+  * @}
+  */ 
 
 /**
- * @}
- */
+  * @}
+  */
 
 #ifdef __cplusplus
 }

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h

@@ -1,94 +1,79 @@
 /**
- ******************************************************************************
- * @file    stm32f4xx_hal_flash_ramfunc.h
- * @author  MCD Application Team
- * @brief   Header file of FLASH RAMFUNC driver.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash_ramfunc.h
+  * @author  MCD Application Team
+  * @brief   Header file of FLASH RAMFUNC driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
 
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F4xx_FLASH_RAMFUNC_H
 #define __STM32F4xx_FLASH_RAMFUNC_H
 
 #ifdef __cplusplus
-extern "C" {
+ extern "C" {
 #endif
 #if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
     defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)  
 
-	/* Includes ------------------------------------------------------------------*/
+/* Includes ------------------------------------------------------------------*/
 #include "stm32f4xx_hal_def.h"
 
-	/** @addtogroup STM32F4xx_HAL_Driver
-	 * @{
-	 */
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
 
-	/** @addtogroup FLASH_RAMFUNC
-	 * @{
-	 */
+/** @addtogroup FLASH_RAMFUNC
+  * @{
+  */
 
-	/* Exported types ------------------------------------------------------------*/
-	/* Exported macro ------------------------------------------------------------*/
-	/* Exported functions --------------------------------------------------------*/
-	/** @addtogroup FLASH_RAMFUNC_Exported_Functions
-	 * @{
-	 */
+/* Exported types ------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_RAMFUNC_Exported_Functions
+  * @{
+  */
 
-	/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1
-	 * @{
-	 */
-	__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void);
-	__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void);
-	__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void);
-	__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void);
-	/**
-	 * @}
-	 */
+/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1
+  * @{
+  */   
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void);
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void);
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void);
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void);
+/**
+  * @}
+  */ 
 
-	/**
-	 * @}
-	 */
+/**
+  * @}
+  */
 
-	/**
-	 * @}
-	 */
+/**
+  * @}
+  */ 
 
-	/**
-	 * @}
-	 */
+/**
+  * @}
+  */
 
 #endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */  
 #ifdef __cplusplus
 }
 #endif
 
+
 #endif /* __STM32F4xx_FLASH_RAMFUNC_H */
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h

@@ -1,101 +1,88 @@
 /**
- ******************************************************************************
- * @file    stm32f4xx_hal_gpio.h
- * @author  MCD Application Team
- * @brief   Header file of GPIO HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
+  ******************************************************************************
+  * @file    stm32f4xx_hal_gpio.h
+  * @author  MCD Application Team
+  * @brief   Header file of GPIO HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
 
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F4xx_HAL_GPIO_H
 #define __STM32F4xx_HAL_GPIO_H
 
 #ifdef __cplusplus
-extern "C" {
+ extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f4xx_hal_def.h"
 
 /** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
+  * @{
+  */
 
 /** @addtogroup GPIO
- * @{
- */
+  * @{
+  */ 
 
 /* Exported types ------------------------------------------------------------*/
 /** @defgroup GPIO_Exported_Types GPIO Exported Types
- * @{
- */
+  * @{
+  */
 
 /** 
- * @brief GPIO Init structure definition  
- */
-typedef struct {
-	uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
-	 This parameter can be any value of @ref GPIO_pins_define */
+  * @brief GPIO Init structure definition  
+  */ 
+typedef struct
+{
+  uint32_t Pin;       /*!< Specifies the GPIO pins to be configured.
+                           This parameter can be any value of @ref GPIO_pins_define */
 
-	uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
-	 This parameter can be a value of @ref GPIO_mode_define */
+  uint32_t Mode;      /*!< Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref GPIO_mode_define */
 
-	uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
-	 This parameter can be a value of @ref GPIO_pull_define */
+  uint32_t Pull;      /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+                           This parameter can be a value of @ref GPIO_pull_define */
 
-	uint32_t Speed; /*!< Specifies the speed for the selected pins.
-	 This parameter can be a value of @ref GPIO_speed_define */
+  uint32_t Speed;     /*!< Specifies the speed for the selected pins.
+                           This parameter can be a value of @ref GPIO_speed_define */
 
-	uint32_t Alternate; /*!< Peripheral to be connected to the selected pins. 
-	 This parameter can be a value of @ref GPIO_Alternate_function_selection */
-} GPIO_InitTypeDef;
+  uint32_t Alternate;  /*!< Peripheral to be connected to the selected pins. 
+                            This parameter can be a value of @ref GPIO_Alternate_function_selection */
+}GPIO_InitTypeDef;
 
 /** 
- * @brief  GPIO Bit SET and Bit RESET enumeration 
- */
-typedef enum {
-	GPIO_PIN_RESET = 0, GPIO_PIN_SET
-} GPIO_PinState;
+  * @brief  GPIO Bit SET and Bit RESET enumeration 
+  */
+typedef enum
+{
+  GPIO_PIN_RESET = 0,
+  GPIO_PIN_SET
+}GPIO_PinState;
 /**
- * @}
- */
+  * @}
+  */
 
 /* Exported constants --------------------------------------------------------*/
 
 /** @defgroup GPIO_Exported_Constants GPIO Exported Constants
- * @{
- */
+  * @{
+  */ 
 
 /** @defgroup GPIO_pins_define GPIO pins define
- * @{
- */
+  * @{
+  */
 #define GPIO_PIN_0                 ((uint16_t)0x0001)  /* Pin 0 selected    */
 #define GPIO_PIN_1                 ((uint16_t)0x0002)  /* Pin 1 selected    */
 #define GPIO_PIN_2                 ((uint16_t)0x0004)  /* Pin 2 selected    */
@@ -116,19 +103,19 @@ typedef enum {
 
 #define GPIO_PIN_MASK              0x0000FFFFU /* PIN mask for assert test */
 /**
- * @}
- */
+  * @}
+  */
 
 /** @defgroup GPIO_mode_define GPIO mode define
- * @brief GPIO Configuration Mode 
- *        Elements values convention: 0xX0yz00YZ
- *           - X  : GPIO mode or EXTI Mode
- *           - y  : External IT or Event trigger detection 
- *           - z  : IO configuration on External IT or Event
- *           - Y  : Output type (Push Pull or Open Drain)
- *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)
- * @{
- */
+  * @brief GPIO Configuration Mode 
+  *        Elements values convention: 0xX0yz00YZ
+  *           - X  : GPIO mode or EXTI Mode
+  *           - y  : External IT or Event trigger detection 
+  *           - z  : IO configuration on External IT or Event
+  *           - Y  : Output type (Push Pull or Open Drain)
+  *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)
+  * @{
+  */ 
 #define  GPIO_MODE_INPUT                        0x00000000U   /*!< Input Floating Mode                   */
 #define  GPIO_MODE_OUTPUT_PP                    0x00000001U   /*!< Output Push Pull Mode                 */
 #define  GPIO_MODE_OUTPUT_OD                    0x00000011U   /*!< Output Open Drain Mode                */
@@ -136,145 +123,144 @@ typedef enum {
 #define  GPIO_MODE_AF_OD                        0x00000012U   /*!< Alternate Function Open Drain Mode    */
 
 #define  GPIO_MODE_ANALOG                       0x00000003U   /*!< Analog Mode  */
-
+    
 #define  GPIO_MODE_IT_RISING                    0x10110000U   /*!< External Interrupt Mode with Rising edge trigger detection          */
 #define  GPIO_MODE_IT_FALLING                   0x10210000U   /*!< External Interrupt Mode with Falling edge trigger detection         */
 #define  GPIO_MODE_IT_RISING_FALLING            0x10310000U   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
-
+ 
 #define  GPIO_MODE_EVT_RISING                   0x10120000U   /*!< External Event Mode with Rising edge trigger detection               */
 #define  GPIO_MODE_EVT_FALLING                  0x10220000U   /*!< External Event Mode with Falling edge trigger detection              */
 #define  GPIO_MODE_EVT_RISING_FALLING           0x10320000U   /*!< External Event Mode with Rising/Falling edge trigger detection       */
 /**
- * @}
- */
+  * @}
+  */
 
 /** @defgroup GPIO_speed_define  GPIO speed define
- * @brief GPIO Output Maximum frequency
- * @{
- */
+  * @brief GPIO Output Maximum frequency
+  * @{
+  */
 #define  GPIO_SPEED_FREQ_LOW         0x00000000U  /*!< IO works at 2 MHz, please refer to the product datasheet */
 #define  GPIO_SPEED_FREQ_MEDIUM      0x00000001U  /*!< range 12,5 MHz to 50 MHz, please refer to the product datasheet */
 #define  GPIO_SPEED_FREQ_HIGH        0x00000002U  /*!< range 25 MHz to 100 MHz, please refer to the product datasheet  */
 #define  GPIO_SPEED_FREQ_VERY_HIGH   0x00000003U  /*!< range 50 MHz to 200 MHz, please refer to the product datasheet  */
 /**
- * @}
- */
+  * @}
+  */
 
-/** @defgroup GPIO_pull_define GPIO pull define
- * @brief GPIO Pull-Up or Pull-Down Activation
- * @{
- */
+ /** @defgroup GPIO_pull_define GPIO pull define
+   * @brief GPIO Pull-Up or Pull-Down Activation
+   * @{
+   */  
 #define  GPIO_NOPULL        0x00000000U   /*!< No Pull-up or Pull-down activation  */
 #define  GPIO_PULLUP        0x00000001U   /*!< Pull-up activation                  */
 #define  GPIO_PULLDOWN      0x00000002U   /*!< Pull-down activation                */
 /**
- * @}
- */
-
+  * @}
+  */
+  
 /**
- * @}
- */
+  * @}
+  */
 
 /* Exported macro ------------------------------------------------------------*/
 /** @defgroup GPIO_Exported_Macros GPIO Exported Macros
- * @{
- */
+  * @{
+  */
 
 /**
- * @brief  Checks whether the specified EXTI line flag is set or not.
- * @param  __EXTI_LINE__ specifies the EXTI line flag to check.
- *         This parameter can be GPIO_PIN_x where x can be(0..15)
- * @retval The new state of __EXTI_LINE__ (SET or RESET).
- */
+  * @brief  Checks whether the specified EXTI line flag is set or not.
+  * @param  __EXTI_LINE__ specifies the EXTI line flag to check.
+  *         This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
 #define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
 
 /**
- * @brief  Clears the EXTI's line pending flags.
- * @param  __EXTI_LINE__ specifies the EXTI lines flags to clear.
- *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
- * @retval None
- */
+  * @brief  Clears the EXTI's line pending flags.
+  * @param  __EXTI_LINE__ specifies the EXTI lines flags to clear.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
 #define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
 
 /**
- * @brief  Checks whether the specified EXTI line is asserted or not.
- * @param  __EXTI_LINE__ specifies the EXTI line to check.
- *          This parameter can be GPIO_PIN_x where x can be(0..15)
- * @retval The new state of __EXTI_LINE__ (SET or RESET).
- */
+  * @brief  Checks whether the specified EXTI line is asserted or not.
+  * @param  __EXTI_LINE__ specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
 #define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
 
 /**
- * @brief  Clears the EXTI's line pending bits.
- * @param  __EXTI_LINE__ specifies the EXTI lines to clear.
- *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
- * @retval None
- */
+  * @brief  Clears the EXTI's line pending bits.
+  * @param  __EXTI_LINE__ specifies the EXTI lines to clear.
+  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
 #define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
 
 /**
- * @brief  Generates a Software interrupt on selected EXTI line.
- * @param  __EXTI_LINE__ specifies the EXTI line to check.
- *          This parameter can be GPIO_PIN_x where x can be(0..15)
- * @retval None
- */
+  * @brief  Generates a Software interrupt on selected EXTI line.
+  * @param  __EXTI_LINE__ specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval None
+  */
 #define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
 /**
- * @}
- */
+  * @}
+  */
 
 /* Include GPIO HAL Extension module */
 #include "stm32f4xx_hal_gpio_ex.h"
 
 /* Exported functions --------------------------------------------------------*/
 /** @addtogroup GPIO_Exported_Functions
- * @{
- */
+  * @{
+  */
 
 /** @addtogroup GPIO_Exported_Functions_Group1
- * @{
- */
+  * @{
+  */
 /* Initialization and de-initialization functions *****************************/
-void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
-void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+void  HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void  HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin);
 /**
- * @}
- */
+  * @}
+  */
 
 /** @addtogroup GPIO_Exported_Functions_Group2
- * @{
- */
+  * @{
+  */
 /* IO operation functions *****************************************************/
 GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin,
-		GPIO_PinState PinState);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
 void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
 HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
 void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
 void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
 
 /**
- * @}
- */
+  * @}
+  */ 
 
 /**
- * @}
- */
+  * @}
+  */ 
 /* Private types -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private constants ---------------------------------------------------------*/
 /** @defgroup GPIO_Private_Constants GPIO Private Constants
- * @{
- */
+  * @{
+  */
 
 /**
- * @}
- */
+  * @}
+  */
 
 /* Private macros ------------------------------------------------------------*/
 /** @defgroup GPIO_Private_Macros GPIO Private Macros
- * @{
- */
+  * @{
+  */
 #define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
 #define IS_GPIO_PIN(PIN)           ((((PIN) & GPIO_PIN_MASK ) != 0x00U) && (((PIN) & ~GPIO_PIN_MASK) == 0x00U))
 #define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT)              ||\
@@ -294,25 +280,25 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
 #define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
                             ((PULL) == GPIO_PULLDOWN))
 /**
- * @}
- */
+  * @}
+  */
 
 /* Private functions ---------------------------------------------------------*/
 /** @defgroup GPIO_Private_Functions GPIO Private Functions
- * @{
- */
+  * @{
+  */
 
 /**
- * @}
- */
+  * @}
+  */
 
 /**
- * @}
- */
+  * @}
+  */ 
 
 /**
- * @}
- */
+  * @}
+  */
 
 #ifdef __cplusplus
 }

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h

@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -38,7 +22,7 @@
 #define __STM32F4xx_HAL_I2C_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -56,9 +40,10 @@
 /** @defgroup I2C_Exported_Types I2C Exported Types
   * @{
   */
-   
-/**
+
+/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
   * @brief  I2C Configuration Structure definition
+  * @{
   */
 typedef struct
 {
@@ -86,33 +71,38 @@ typedef struct
   uint32_t NoStretchMode;    /*!< Specifies if nostretch mode is selected.
                                   This parameter can be a value of @ref I2C_nostretch_mode */
 
-}I2C_InitTypeDef;
+} I2C_InitTypeDef;
 
 /**
+  * @}
+  */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
   * @brief  HAL State structure definition
   * @note  HAL I2C State value coding follow below described bitmap :
-  *          b7-b6  Error information 
+  *          b7-b6  Error information
   *             00 : No Error
   *             01 : Abort (Abort user request on going)
   *             10 : Timeout
   *             11 : Error
-  *          b5     IP initilisation status
-  *             0  : Reset (IP not initialized)
-  *             1  : Init done (IP initialized and ready to use. HAL I2C Init function called)
+  *          b5     Peripheral initilisation status
+  *             0  : Reset (Peripheral not initialized)
+  *             1  : Init done (Peripheral initialized and ready to use. HAL I2C Init function called)
   *          b4     (not used)
   *             x  : Should be set to 0
   *          b3
   *             0  : Ready or Busy (No Listen mode ongoing)
-  *             1  : Listen (IP in Address Listen Mode)
+  *             1  : Listen (Peripheral in Address Listen Mode)
   *          b2     Intrinsic process state
   *             0  : Ready
-  *             1  : Busy (IP busy with some configuration or internal operations)
+  *             1  : Busy (Peripheral busy with some configuration or internal operations)
   *          b1     Rx state
   *             0  : Ready (no Rx operation ongoing)
   *             1  : Busy (Rx operation ongoing)
   *          b0     Tx state
   *             0  : Ready (no Tx operation ongoing)
   *             1  : Busy (Tx operation ongoing)
+  * @{
   */
 typedef enum
 {
@@ -130,24 +120,29 @@ typedef enum
   HAL_I2C_STATE_TIMEOUT           = 0xA0U,   /*!< Timeout state                             */
   HAL_I2C_STATE_ERROR             = 0xE0U    /*!< Error                                     */
 
-}HAL_I2C_StateTypeDef;
+} HAL_I2C_StateTypeDef;
 
 /**
+  * @}
+  */
+
+/** @defgroup HAL_mode_structure_definition HAL mode structure definition
   * @brief  HAL Mode structure definition
-  * @note  HAL I2C Mode value coding follow below described bitmap :
-  *          b7     (not used)
-  *             x  : Should be set to 0
-  *          b6
-  *             0  : None
-  *             1  : Memory (HAL I2C communication is in Memory Mode)
-  *          b5
-  *             0  : None
-  *             1  : Slave (HAL I2C communication is in Slave Mode)
-  *          b4
-  *             0  : None
-  *             1  : Master (HAL I2C communication is in Master Mode)
-  *          b3-b2-b1-b0  (not used)
+  * @note  HAL I2C Mode value coding follow below described bitmap :\n
+  *          b7     (not used)\n
+  *             x  : Should be set to 0\n
+  *          b6\n
+  *             0  : None\n
+  *             1  : Memory (HAL I2C communication is in Memory Mode)\n
+  *          b5\n
+  *             0  : None\n
+  *             1  : Slave (HAL I2C communication is in Slave Mode)\n
+  *          b4\n
+  *             0  : None\n
+  *             1  : Master (HAL I2C communication is in Master Mode)\n
+  *          b3-b2-b1-b0  (not used)\n
   *             xxxx : Should be set to 0000
+  * @{
   */
 typedef enum
 {
@@ -156,38 +151,63 @@ typedef enum
   HAL_I2C_MODE_SLAVE              = 0x20U,   /*!< I2C communication is in Slave Mode        */
   HAL_I2C_MODE_MEM                = 0x40U    /*!< I2C communication is in Memory Mode       */
 
-}HAL_I2C_ModeTypeDef;
+} HAL_I2C_ModeTypeDef;
 
 /**
+  * @}
+  */
+
+/** @defgroup I2C_Error_Code_definition I2C Error Code definition
+  * @brief  I2C Error Code definition
+  * @{
+  */
+#define HAL_I2C_ERROR_NONE              0x00000000U    /*!< No error              */
+#define HAL_I2C_ERROR_BERR              0x00000001U    /*!< BERR error            */
+#define HAL_I2C_ERROR_ARLO              0x00000002U    /*!< ARLO error            */
+#define HAL_I2C_ERROR_AF                0x00000004U    /*!< AF error              */
+#define HAL_I2C_ERROR_OVR               0x00000008U    /*!< OVR error             */
+#define HAL_I2C_ERROR_DMA               0x00000010U    /*!< DMA transfer error    */
+#define HAL_I2C_ERROR_TIMEOUT           0x00000020U    /*!< Timeout Error         */
+#define HAL_I2C_ERROR_SIZE              0x00000040U    /*!< Size Management error */
+#define HAL_I2C_ERROR_DMA_PARAM         0x00000080U    /*!< DMA Parameter Error   */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+#define HAL_I2C_ERROR_INVALID_CALLBACK  0x00000100U    /*!< Invalid Callback error */
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
   * @brief  I2C handle Structure definition
+  * @{
   */
-typedef struct
+typedef struct __I2C_HandleTypeDef
 {
   I2C_TypeDef                *Instance;      /*!< I2C registers base address               */
-                                             
+
   I2C_InitTypeDef            Init;           /*!< I2C communication parameters             */
-                                             
+
   uint8_t                    *pBuffPtr;      /*!< Pointer to I2C transfer buffer           */
-                                             
+
   uint16_t                   XferSize;       /*!< I2C transfer size                        */
-                                             
+
   __IO uint16_t              XferCount;      /*!< I2C transfer counter                     */
-                                             
+
   __IO uint32_t              XferOptions;    /*!< I2C transfer options                     */
-                                             
+
   __IO uint32_t              PreviousState;  /*!< I2C communication Previous state and mode
                                                   context for internal usage               */
-                                             
+
   DMA_HandleTypeDef          *hdmatx;        /*!< I2C Tx DMA handle parameters             */
-                                             
+
   DMA_HandleTypeDef          *hdmarx;        /*!< I2C Rx DMA handle parameters             */
-                                             
+
   HAL_LockTypeDef            Lock;           /*!< I2C locking object                       */
-                                             
+
   __IO HAL_I2C_StateTypeDef  State;          /*!< I2C communication state                  */
-                                             
+
   __IO HAL_I2C_ModeTypeDef   Mode;           /*!< I2C communication mode                   */
-                                             
+
   __IO uint32_t              ErrorCode;      /*!< I2C Error code                           */
 
   __IO uint32_t              Devaddress;     /*!< I2C Target device address                */
@@ -197,33 +217,68 @@ typedef struct
   __IO uint32_t              MemaddSize;     /*!< I2C Target memory address  size          */
 
   __IO uint32_t              EventCount;     /*!< I2C Event counter                        */
-	
-}I2C_HandleTypeDef;
 
+
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+  void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);           /*!< I2C Master Tx Transfer completed callback */
+  void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);           /*!< I2C Master Rx Transfer completed callback */
+  void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);            /*!< I2C Slave Tx Transfer completed callback  */
+  void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);            /*!< I2C Slave Rx Transfer completed callback  */
+  void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c);             /*!< I2C Listen Complete callback              */
+  void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Memory Tx Transfer completed callback */
+  void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Memory Rx Transfer completed callback */
+  void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c);                  /*!< I2C Error callback                        */
+  void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Abort callback                        */
+
+  void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);  /*!< I2C Slave Address Match callback */
+
+  void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c);                /*!< I2C Msp Init callback                     */
+  void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Msp DeInit callback                   */
+
+#endif  /* USE_HAL_I2C_REGISTER_CALLBACKS */
+} I2C_HandleTypeDef;
+
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
 /**
-  * @}
+  * @brief  HAL I2C Callback ID enumeration definition
   */
+typedef enum
+{
+  HAL_I2C_MASTER_TX_COMPLETE_CB_ID      = 0x00U,    /*!< I2C Master Tx Transfer completed callback ID  */
+  HAL_I2C_MASTER_RX_COMPLETE_CB_ID      = 0x01U,    /*!< I2C Master Rx Transfer completed callback ID  */
+  HAL_I2C_SLAVE_TX_COMPLETE_CB_ID       = 0x02U,    /*!< I2C Slave Tx Transfer completed callback ID   */
+  HAL_I2C_SLAVE_RX_COMPLETE_CB_ID       = 0x03U,    /*!< I2C Slave Rx Transfer completed callback ID   */
+  HAL_I2C_LISTEN_COMPLETE_CB_ID         = 0x04U,    /*!< I2C Listen Complete callback ID               */
+  HAL_I2C_MEM_TX_COMPLETE_CB_ID         = 0x05U,    /*!< I2C Memory Tx Transfer callback ID            */
+  HAL_I2C_MEM_RX_COMPLETE_CB_ID         = 0x06U,    /*!< I2C Memory Rx Transfer completed callback ID  */
+  HAL_I2C_ERROR_CB_ID                   = 0x07U,    /*!< I2C Error callback ID                         */
+  HAL_I2C_ABORT_CB_ID                   = 0x08U,    /*!< I2C Abort callback ID                         */
 
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup I2C_Exported_Constants I2C Exported Constants
-  * @{
+  HAL_I2C_MSPINIT_CB_ID                 = 0x09U,    /*!< I2C Msp Init callback ID                      */
+  HAL_I2C_MSPDEINIT_CB_ID               = 0x0AU     /*!< I2C Msp DeInit callback ID                    */
+
+} HAL_I2C_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL I2C Callback pointer definition
   */
+typedef  void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */
+typedef  void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */
 
-/** @defgroup I2C_Error_Code I2C Error Code
-  * @brief    I2C Error Code 
-  * @{
-  */ 
-#define HAL_I2C_ERROR_NONE       0x00000000U    /*!< No error           */
-#define HAL_I2C_ERROR_BERR       0x00000001U    /*!< BERR error         */
-#define HAL_I2C_ERROR_ARLO       0x00000002U    /*!< ARLO error         */
-#define HAL_I2C_ERROR_AF         0x00000004U    /*!< AF error           */
-#define HAL_I2C_ERROR_OVR        0x00000008U    /*!< OVR error          */
-#define HAL_I2C_ERROR_DMA        0x00000010U    /*!< DMA transfer error */
-#define HAL_I2C_ERROR_TIMEOUT    0x00000020U    /*!< Timeout Error      */
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
 /**
   * @}
   */
 
+/**
+  * @}
+  */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+  * @{
+  */
+
 /** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode
   * @{
   */
@@ -281,7 +336,7 @@ typedef struct
 /** @defgroup I2C_XferDirection_definition I2C XferDirection definition
   * @{
   */
-#define I2C_DIRECTION_RECEIVE           0x00000000U 
+#define I2C_DIRECTION_RECEIVE           0x00000000U
 #define I2C_DIRECTION_TRANSMIT          0x00000001U
 /**
   * @}
@@ -291,14 +346,25 @@ typedef struct
   * @{
   */
 #define  I2C_FIRST_FRAME                0x00000001U
-#define  I2C_NEXT_FRAME                 0x00000002U
-#define  I2C_FIRST_AND_LAST_FRAME       0x00000004U
-#define  I2C_LAST_FRAME                 0x00000008U
+#define  I2C_FIRST_AND_NEXT_FRAME       0x00000002U
+#define  I2C_NEXT_FRAME                 0x00000004U
+#define  I2C_FIRST_AND_LAST_FRAME       0x00000008U
+#define  I2C_LAST_FRAME_NO_STOP         0x00000010U
+#define  I2C_LAST_FRAME                 0x00000020U
+
+/* List of XferOptions in usage of :
+ * 1- Restart condition in all use cases (direction change or not)
+ */
+#define  I2C_OTHER_FRAME                (0x00AA0000U)
+#define  I2C_OTHER_AND_LAST_FRAME       (0xAA000000U)
 /**
   * @}
   */
 
 /** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+  * @brief I2C Interrupt definition
+  *        Elements values convention: 0xXXXXXXXX
+  *           - XXXXXXXX  : Interrupt control mask
   * @{
   */
 #define I2C_IT_BUF                      I2C_CR2_ITBUFEN
@@ -311,9 +377,7 @@ typedef struct
 /** @defgroup I2C_Flag_definition I2C Flag definition
   * @{
   */
-#define I2C_FLAG_SMBALERT               0x00018000U
-#define I2C_FLAG_TIMEOUT                0x00014000U
-#define I2C_FLAG_PECERR                 0x00011000U
+
 #define I2C_FLAG_OVR                    0x00010800U
 #define I2C_FLAG_AF                     0x00010400U
 #define I2C_FLAG_ARLO                   0x00010200U
@@ -326,8 +390,6 @@ typedef struct
 #define I2C_FLAG_ADDR                   0x00010002U
 #define I2C_FLAG_SB                     0x00010001U
 #define I2C_FLAG_DUALF                  0x00100080U
-#define I2C_FLAG_SMBHOST                0x00100040U
-#define I2C_FLAG_SMBDEFAULT             0x00100020U
 #define I2C_FLAG_GENCALL                0x00100010U
 #define I2C_FLAG_TRA                    0x00100004U
 #define I2C_FLAG_BUSY                   0x00100002U
@@ -340,21 +402,28 @@ typedef struct
   * @}
   */
 
-/* Exported macro ------------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+
 /** @defgroup I2C_Exported_Macros I2C Exported Macros
   * @{
   */
 
-/** @brief Reset I2C handle state
+/** @brief Reset I2C handle state.
   * @param  __HANDLE__ specifies the I2C Handle.
-  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
   * @retval None
   */
-#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__)                do{                                                   \
+                                                                    (__HANDLE__)->State = HAL_I2C_STATE_RESET;       \
+                                                                    (__HANDLE__)->MspInitCallback = NULL;            \
+                                                                    (__HANDLE__)->MspDeInitCallback = NULL;          \
+                                                                  } while(0)
+#else
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__)                ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+#endif
 
 /** @brief  Enable or disable the specified I2C interrupts.
   * @param  __HANDLE__ specifies the I2C Handle.
-  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
   * @param  __INTERRUPT__ specifies the interrupt source to enable or disable.
   *         This parameter can be one of the following values:
   *            @arg I2C_IT_BUF: Buffer interrupt enable
@@ -362,12 +431,11 @@ typedef struct
   *            @arg I2C_IT_ERR: Error interrupt enable
   * @retval None
   */
-#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
-#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__)   SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__)  CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
 
 /** @brief  Checks if the specified I2C interrupt source is enabled or disabled.
   * @param  __HANDLE__ specifies the I2C Handle.
-  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
   * @param  __INTERRUPT__ specifies the I2C interrupt source to check.
   *          This parameter can be one of the following values:
   *            @arg I2C_IT_BUF: Buffer interrupt enable
@@ -379,12 +447,8 @@ typedef struct
 
 /** @brief  Checks whether the specified I2C flag is set or not.
   * @param  __HANDLE__ specifies the I2C Handle.
-  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
   * @param  __FLAG__ specifies the flag to check.
   *         This parameter can be one of the following values:
-  *            @arg I2C_FLAG_SMBALERT: SMBus Alert flag
-  *            @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
-  *            @arg I2C_FLAG_PECERR: PEC error in reception flag
   *            @arg I2C_FLAG_OVR: Overrun/Underrun flag
   *            @arg I2C_FLAG_AF: Acknowledge failure flag
   *            @arg I2C_FLAG_ARLO: Arbitration lost flag
@@ -398,25 +462,20 @@ typedef struct
   *                                Address matched flag
   *            @arg I2C_FLAG_SB: Start bit flag
   *            @arg I2C_FLAG_DUALF: Dual flag
-  *            @arg I2C_FLAG_SMBHOST: SMBus host header
-  *            @arg I2C_FLAG_SMBDEFAULT: SMBus default header
   *            @arg I2C_FLAG_GENCALL: General call header flag
   *            @arg I2C_FLAG_TRA: Transmitter/Receiver flag
   *            @arg I2C_FLAG_BUSY: Bus busy flag
   *            @arg I2C_FLAG_MSL: Master/Slave flag
   * @retval The new state of __FLAG__ (TRUE or FALSE).
   */
-#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16U)) == 0x01U)?((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)): \
-                                                 ((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)))
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16U)) == 0x01U) ? \
+                                                  (((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) : \
+                                                  (((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET))
 
 /** @brief  Clears the I2C pending flags which are cleared by writing 0 in a specific bit.
   * @param  __HANDLE__ specifies the I2C Handle.
-  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
   * @param  __FLAG__ specifies the flag to clear.
   *         This parameter can be any combination of the following values:
-  *            @arg I2C_FLAG_SMBALERT: SMBus Alert flag
-  *            @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
-  *            @arg I2C_FLAG_PECERR: PEC error in reception flag
   *            @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
   *            @arg I2C_FLAG_AF: Acknowledge failure flag
   *            @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
@@ -440,30 +499,27 @@ typedef struct
 
 /** @brief  Clears the I2C STOPF pending flag.
   * @param  __HANDLE__ specifies the I2C Handle.
-  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
   * @retval None
   */
-#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__)    \
-  do{                                           \
-    __IO uint32_t tmpreg = 0x00U;               \
-    tmpreg = (__HANDLE__)->Instance->SR1;       \
-    (__HANDLE__)->Instance->CR1 |= I2C_CR1_PE;  \
-    UNUSED(tmpreg);                             \
+#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__)           \
+  do{                                                  \
+    __IO uint32_t tmpreg = 0x00U;                      \
+    tmpreg = (__HANDLE__)->Instance->SR1;              \
+    SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE);  \
+    UNUSED(tmpreg);                                    \
   } while(0)
-    
-/** @brief  Enable the I2C peripheral.
+
+/** @brief  Enable the specified I2C peripheral.
   * @param  __HANDLE__ specifies the I2C Handle.
-  *         This parameter can be I2Cx where x: 1 or 2  to select the I2C peripheral.
   * @retval None
   */
-#define __HAL_I2C_ENABLE(__HANDLE__)                             ((__HANDLE__)->Instance->CR1 |=  I2C_CR1_PE)
+#define __HAL_I2C_ENABLE(__HANDLE__)                  SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)
 
-/** @brief  Disable the I2C peripheral.
+/** @brief  Disable the specified I2C peripheral.
   * @param  __HANDLE__ specifies the I2C Handle.
-  *         This parameter can be I2Cx where x: 1 or 2  to select the I2C peripheral.
   * @retval None
   */
-#define __HAL_I2C_DISABLE(__HANDLE__)                            ((__HANDLE__)->Instance->CR1 &=  ~I2C_CR1_PE)
+#define __HAL_I2C_DISABLE(__HANDLE__)                 CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)
 
 /**
   * @}
@@ -477,22 +533,31 @@ typedef struct
   * @{
   */
 
-/** @addtogroup I2C_Exported_Functions_Group1
+/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
   * @{
   */
-/* Initialization/de-initialization functions  **********************************/
+/* Initialization and de-initialization functions******************************/
 HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
-HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
 void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
 void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
 /**
   * @}
   */
 
-/** @addtogroup I2C_Exported_Functions_Group2
+/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
   * @{
   */
-/* I/O operation functions  *****************************************************/
+/* IO operation functions  ****************************************************/
 /******* Blocking mode: Polling */
 HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
 HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
@@ -510,13 +575,13 @@ HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pDa
 HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
 
-HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
 HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
 HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
 
 /******* Non-Blocking mode: DMA */
 HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
@@ -526,6 +591,17 @@ HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pD
 HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
 
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
 /******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
 void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
 void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
@@ -543,10 +619,10 @@ void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
   * @}
   */
 
-/** @addtogroup I2C_Exported_Functions_Group3
+/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
   * @{
   */
-/* Peripheral State, Mode and Errors functions  *********************************/
+/* Peripheral State, Mode and Error functions  *********************************/
 HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
 HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
 uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
@@ -564,7 +640,9 @@ uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
 /** @defgroup I2C_Private_Constants I2C Private Constants
   * @{
   */
-#define I2C_FLAG_MASK  0x0000FFFFU
+#define I2C_FLAG_MASK                    0x0000FFFFU
+#define I2C_MIN_PCLK_FREQ_STANDARD       2000000U     /*!< 2 MHz                     */
+#define I2C_MIN_PCLK_FREQ_FAST           4000000U     /*!< 4 MHz                     */
 /**
   * @}
   */
@@ -573,16 +651,18 @@ uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
 /** @defgroup I2C_Private_Macros I2C Private Macros
   * @{
   */
-    
+
+#define I2C_MIN_PCLK_FREQ(__PCLK__, __SPEED__)             (((__SPEED__) <= 100000U) ? ((__PCLK__) < I2C_MIN_PCLK_FREQ_STANDARD) : ((__PCLK__) < I2C_MIN_PCLK_FREQ_FAST))
+#define I2C_CCR_CALCULATION(__PCLK__, __SPEED__, __COEFF__)     (((((__PCLK__) - 1U)/((__SPEED__) * (__COEFF__))) + 1U) & I2C_CCR_CCR)
 #define I2C_FREQRANGE(__PCLK__)                            ((__PCLK__)/1000000U)
 #define I2C_RISE_TIME(__FREQRANGE__, __SPEED__)            (((__SPEED__) <= 100000U) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U))
-#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__)            (((((__PCLK__)/((__SPEED__) << 1U)) & I2C_CCR_CCR) < 4U)? 4U:((__PCLK__) / ((__SPEED__) << 1U)))
-#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? ((__PCLK__) / ((__SPEED__) * 3U)) : (((__PCLK__) / ((__SPEED__) * 25U)) | I2C_DUTYCYCLE_16_9))
+#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__)            ((I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U) < 4U)? 4U:I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U))
+#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 3U) : (I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 25U) | I2C_DUTYCYCLE_16_9))
 #define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__)      (((__SPEED__) <= 100000U)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \
                                                                   ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0U)? 1U : \
                                                                   ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS))
 
-#define I2C_7BIT_ADD_WRITE(__ADDRESS__)                    ((uint8_t)((__ADDRESS__) & (~I2C_OAR1_ADD0)))
+#define I2C_7BIT_ADD_WRITE(__ADDRESS__)                    ((uint8_t)((__ADDRESS__) & (uint8_t)(~I2C_OAR1_ADD0)))
 #define I2C_7BIT_ADD_READ(__ADDRESS__)                     ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0))
 
 #define I2C_10BIT_ADDRESS(__ADDRESS__)                     ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF)))
@@ -611,9 +691,18 @@ uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
 #define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & 0xFFFFFC00U) == 0U)
 #define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & 0xFFFFFF01U) == 0U)
 #define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST)      (((REQUEST) == I2C_FIRST_FRAME)              || \
+                                                       ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME)     || \
                                                        ((REQUEST) == I2C_NEXT_FRAME)               || \
                                                        ((REQUEST) == I2C_FIRST_AND_LAST_FRAME)     || \
-                                                       ((REQUEST) == I2C_LAST_FRAME))
+                                                       ((REQUEST) == I2C_LAST_FRAME)               || \
+                                                       ((REQUEST) == I2C_LAST_FRAME_NO_STOP)       || \
+                                                       IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))
+
+#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME)     || \
+                                                        ((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
+
+#define I2C_CHECK_FLAG(__ISR__, __FLAG__)         ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
+#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__)      ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
 /**
   * @}
   */

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h

@@ -6,46 +6,28 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
-  */ 
+  */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F4xx_HAL_I2C_EX_H
 #define __STM32F4xx_HAL_I2C_EX_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
-    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) ||\
-    defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || defined(STM32F423xx)
+#if  defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF)
 /* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal_def.h"  
+#include "stm32f4xx_hal_def.h"
 
 /** @addtogroup STM32F4xx_HAL_Driver
   * @{
@@ -53,9 +35,9 @@
 
 /** @addtogroup I2CEx
   * @{
-  */ 
+  */
 
-/* Exported types ------------------------------------------------------------*/ 
+/* Exported types ------------------------------------------------------------*/
 /* Exported constants --------------------------------------------------------*/
 /** @defgroup I2CEx_Exported_Constants I2C Exported Constants
   * @{
@@ -69,11 +51,11 @@
 /**
   * @}
   */
-  
+
 /**
   * @}
-  */ 
-  
+  */
+
 /* Exported macro ------------------------------------------------------------*/
 /* Exported functions --------------------------------------------------------*/
 /** @addtogroup I2CEx_Exported_Functions
@@ -92,7 +74,7 @@ HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_
 
 /**
   * @}
-  */ 
+  */
 /* Private types -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private constants ---------------------------------------------------------*/
@@ -117,15 +99,13 @@ HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
   */
 
-#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F401xC ||\
-          STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx ||\
-		  STM32F413xx || STM32F423xx */
+#endif
 
 #ifdef __cplusplus
 }

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h

@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h

@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -225,11 +209,6 @@ HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
 uint32_t HAL_PWREx_GetVoltageRange(void);
 HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
 
-#if defined(STM32F469xx) || defined(STM32F479xx)
-void HAL_PWREx_EnableWakeUpPinPolarityRisingEdge(void);
-void HAL_PWREx_EnableWakeUpPinPolarityFallingEdge(void);
-#endif /* STM32F469xx || STM32F479xx */
-
 #if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\
     defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
     defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
@@ -298,11 +277,6 @@ HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t
 #define BRE_BIT_NUMBER   PWR_CSR_BRE_Pos
 #define CSR_BRE_BB      (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U))
 
-#if defined(STM32F469xx) || defined(STM32F479xx)
-/* Alias word address of WUPP bit */
-#define WUPP_BIT_NUMBER   PWR_CSR_WUPP_Pos
-#define CSR_WUPP_BB      (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (WUPP_BIT_NUMBER * 4U))
-#endif /* STM32F469xx || STM32F479xx */
 /**
   * @}
   */

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h

@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h

@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -4730,6 +4714,7 @@ typedef struct
   *         using it.
   * @{
   */
+#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) 
 #define __HAL_RCC_GPIOD_CLK_ENABLE()   do { \
                                         __IO uint32_t tmpreg = 0x00U; \
                                         SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
@@ -4737,6 +4722,8 @@ typedef struct
                                         tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
                                         UNUSED(tmpreg); \
                                       } while(0U)
+#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx ||  STM32F413xx || STM32F423xx */
+#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) 
 #define __HAL_RCC_GPIOE_CLK_ENABLE()    do { \
                                         __IO uint32_t tmpreg = 0x00U; \
                                         SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
@@ -4744,6 +4731,8 @@ typedef struct
                                         tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
                                         UNUSED(tmpreg); \
                                       } while(0U)
+#endif /* STM32F412Vx || STM32F412Zx ||  STM32F413xx || STM32F423xx */
+#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)                                        
 #define __HAL_RCC_GPIOF_CLK_ENABLE()  do { \
                                       __IO uint32_t tmpreg = 0x00U; \
                                       SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
@@ -4758,6 +4747,7 @@ typedef struct
                                       tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
                                       UNUSED(tmpreg); \
                                       } while(0U)
+#endif /*  STM32F412Zx || STM32F413xx || STM32F423xx */                                       
 #define __HAL_RCC_CRC_CLK_ENABLE()  do { \
                                       __IO uint32_t tmpreg = 0x00U; \
                                       SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
@@ -4765,11 +4755,16 @@ typedef struct
                                       tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
                                       UNUSED(tmpreg); \
                                       } while(0U)                                        
-
+#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) 
 #define __HAL_RCC_GPIOD_CLK_DISABLE()        (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx ||  STM32F413xx || STM32F423xx */
+#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) 
 #define __HAL_RCC_GPIOE_CLK_DISABLE()        (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#endif /* STM32F412Vx || STM32F412Zx ||  STM32F413xx || STM32F423xx */
+#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_GPIOF_CLK_DISABLE()        (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
 #define __HAL_RCC_GPIOG_CLK_DISABLE()        (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#endif /*  STM32F412Zx || STM32F413xx || STM32F423xx */
 #define __HAL_RCC_CRC_CLK_DISABLE()          (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
 /**
   * @}
@@ -4782,16 +4777,28 @@ typedef struct
   *         using it.
   * @{
   */
+#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_GPIOD_IS_CLK_ENABLED()     ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx ||  STM32F413xx || STM32F423xx */
+#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_GPIOE_IS_CLK_ENABLED()     ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#endif /* STM32F412Vx || STM32F412Zx ||  STM32F413xx || STM32F423xx */
+#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_GPIOF_IS_CLK_ENABLED()     ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
 #define __HAL_RCC_GPIOG_IS_CLK_ENABLED()     ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
+#endif /*  STM32F412Zx || STM32F413xx || STM32F423xx */
 #define __HAL_RCC_CRC_IS_CLK_ENABLED()       ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
 
+#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_GPIOD_IS_CLK_DISABLED()     ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx ||  STM32F413xx || STM32F423xx */
+#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_GPIOE_IS_CLK_DISABLED()     ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#endif /* STM32F412Vx || STM32F412Zx ||  STM32F413xx || STM32F423xx */
+#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_GPIOF_IS_CLK_DISABLED()     ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
 #define __HAL_RCC_GPIOG_IS_CLK_DISABLED()     ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
+#endif /*  STM32F412Zx || STM32F413xx || STM32F423xx */
 #define __HAL_RCC_CRC_IS_CLK_DISABLED()       ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
 /**
   * @}
@@ -5346,16 +5353,28 @@ typedef struct
   * @brief  Force or release AHB1 peripheral reset.
   * @{
   */
+#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_GPIOD_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx ||  STM32F413xx || STM32F423xx */
+#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_GPIOE_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#endif /* STM32F412Vx || STM32F412Zx ||  STM32F413xx || STM32F423xx */
+#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_GPIOF_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
 #define __HAL_RCC_GPIOG_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#endif /*  STM32F412Zx || STM32F413xx || STM32F423xx */
 #define __HAL_RCC_CRC_FORCE_RESET()      (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
 
+#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_GPIOD_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx ||  STM32F413xx || STM32F423xx */
+#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_GPIOE_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#endif /* STM32F412Vx || STM32F412Zx ||  STM32F413xx || STM32F423xx */
+#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_GPIOF_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
 #define __HAL_RCC_GPIOG_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#endif /*  STM32F412Zx || STM32F413xx || STM32F423xx */
 #define __HAL_RCC_CRC_RELEASE_RESET()    (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
 /**
   * @}

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h

@@ -6,39 +6,23 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_SPI_H
-#define __STM32F4xx_HAL_SPI_H
+#ifndef STM32F4xx_HAL_SPI_H
+#define STM32F4xx_HAL_SPI_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -62,43 +46,43 @@
   */
 typedef struct
 {
-  uint32_t Mode;               /*!< Specifies the SPI operating mode.
+  uint32_t Mode;                /*!< Specifies the SPI operating mode.
                                      This parameter can be a value of @ref SPI_Mode */
 
   uint32_t Direction;           /*!< Specifies the SPI bidirectional mode state.
                                      This parameter can be a value of @ref SPI_Direction */
 
-  uint32_t DataSize;           /*!< Specifies the SPI data size.
+  uint32_t DataSize;            /*!< Specifies the SPI data size.
                                      This parameter can be a value of @ref SPI_Data_Size */
 
-  uint32_t CLKPolarity;        /*!< Specifies the serial clock steady state.
-                                    This parameter can be a value of @ref SPI_Clock_Polarity */
+  uint32_t CLKPolarity;         /*!< Specifies the serial clock steady state.
+                                     This parameter can be a value of @ref SPI_Clock_Polarity */
 
-  uint32_t CLKPhase;           /*!< Specifies the clock active edge for the bit capture.
-                                    This parameter can be a value of @ref SPI_Clock_Phase */
+  uint32_t CLKPhase;            /*!< Specifies the clock active edge for the bit capture.
+                                     This parameter can be a value of @ref SPI_Clock_Phase */
 
-  uint32_t NSS;                /*!< Specifies whether the NSS signal is managed by
-                                    hardware (NSS pin) or by software using the SSI bit.
-                                    This parameter can be a value of @ref SPI_Slave_Select_management */
+  uint32_t NSS;                 /*!< Specifies whether the NSS signal is managed by
+                                     hardware (NSS pin) or by software using the SSI bit.
+                                     This parameter can be a value of @ref SPI_Slave_Select_management */
 
-  uint32_t BaudRatePrescaler;  /*!< Specifies the Baud Rate prescaler value which will be
-                                    used to configure the transmit and receive SCK clock.
-                                    This parameter can be a value of @ref SPI_BaudRate_Prescaler
-                                    @note The communication clock is derived from the master
+  uint32_t BaudRatePrescaler;   /*!< Specifies the Baud Rate prescaler value which will be
+                                     used to configure the transmit and receive SCK clock.
+                                     This parameter can be a value of @ref SPI_BaudRate_Prescaler
+                                     @note The communication clock is derived from the master
                                      clock. The slave clock does not need to be set. */
 
-  uint32_t FirstBit;           /*!< Specifies whether data transfers start from MSB or LSB bit.
-                                    This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+  uint32_t FirstBit;            /*!< Specifies whether data transfers start from MSB or LSB bit.
+                                     This parameter can be a value of @ref SPI_MSB_LSB_transmission */
 
-  uint32_t TIMode;             /*!< Specifies if the TI mode is enabled or not.
-                                    This parameter can be a value of @ref SPI_TI_mode */
+  uint32_t TIMode;              /*!< Specifies if the TI mode is enabled or not.
+                                     This parameter can be a value of @ref SPI_TI_mode */
 
-  uint32_t CRCCalculation;     /*!< Specifies if the CRC calculation is enabled or not.
-                                    This parameter can be a value of @ref SPI_CRC_Calculation */
+  uint32_t CRCCalculation;      /*!< Specifies if the CRC calculation is enabled or not.
+                                     This parameter can be a value of @ref SPI_CRC_Calculation */
 
-  uint32_t CRCPolynomial;      /*!< Specifies the polynomial used for the CRC calculation.
-                                    This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
-}SPI_InitTypeDef;
+  uint32_t CRCPolynomial;       /*!< Specifies the polynomial used for the CRC calculation.
+                                     This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */
+} SPI_InitTypeDef;
 
 /**
   * @brief  HAL SPI State structure definition
@@ -111,46 +95,85 @@ typedef enum
   HAL_SPI_STATE_BUSY_TX    = 0x03U,    /*!< Data Transmission process is ongoing               */
   HAL_SPI_STATE_BUSY_RX    = 0x04U,    /*!< Data Reception process is ongoing                  */
   HAL_SPI_STATE_BUSY_TX_RX = 0x05U,    /*!< Data Transmission and Reception process is ongoing */
-  HAL_SPI_STATE_ERROR      = 0x06U     /*!< SPI error state                                    */
-}HAL_SPI_StateTypeDef;
+  HAL_SPI_STATE_ERROR      = 0x06U,    /*!< SPI error state                                    */
+  HAL_SPI_STATE_ABORT      = 0x07U     /*!< SPI abort is ongoing                               */
+} HAL_SPI_StateTypeDef;
 
 /**
   * @brief  SPI handle Structure definition
   */
 typedef struct __SPI_HandleTypeDef
 {
-  SPI_TypeDef                *Instance;    /* SPI registers base address */
+  SPI_TypeDef                *Instance;      /*!< SPI registers base address               */
+
+  SPI_InitTypeDef            Init;           /*!< SPI communication parameters             */
+
+  uint8_t                    *pTxBuffPtr;    /*!< Pointer to SPI Tx transfer Buffer        */
 
-  SPI_InitTypeDef            Init;         /* SPI communication parameters */
+  uint16_t                   TxXferSize;     /*!< SPI Tx Transfer size                     */
 
-  uint8_t                    *pTxBuffPtr;  /* Pointer to SPI Tx transfer Buffer */
+  __IO uint16_t              TxXferCount;    /*!< SPI Tx Transfer Counter                  */
 
-  uint16_t                   TxXferSize;   /* SPI Tx Transfer size */
+  uint8_t                    *pRxBuffPtr;    /*!< Pointer to SPI Rx transfer Buffer        */
 
-  __IO uint16_t              TxXferCount;  /* SPI Tx Transfer Counter */
+  uint16_t                   RxXferSize;     /*!< SPI Rx Transfer size                     */
 
-  uint8_t                    *pRxBuffPtr;  /* Pointer to SPI Rx transfer Buffer */
+  __IO uint16_t              RxXferCount;    /*!< SPI Rx Transfer Counter                  */
 
-  uint16_t                   RxXferSize;   /* SPI Rx Transfer size */
+  void (*RxISR)(struct __SPI_HandleTypeDef *hspi);   /*!< function pointer on Rx ISR       */
 
-  __IO uint16_t              RxXferCount;  /* SPI Rx Transfer Counter */
+  void (*TxISR)(struct __SPI_HandleTypeDef *hspi);   /*!< function pointer on Tx ISR       */
 
-  void                       (*RxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Rx ISR */
+  DMA_HandleTypeDef          *hdmatx;        /*!< SPI Tx DMA Handle parameters             */
 
-  void                       (*TxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Tx ISR */
+  DMA_HandleTypeDef          *hdmarx;        /*!< SPI Rx DMA Handle parameters             */
 
-  DMA_HandleTypeDef          *hdmatx;      /* SPI Tx DMA Handle parameters   */
+  HAL_LockTypeDef            Lock;           /*!< Locking object                           */
 
-  DMA_HandleTypeDef          *hdmarx;      /* SPI Rx DMA Handle parameters   */
+  __IO HAL_SPI_StateTypeDef  State;          /*!< SPI communication state                  */
 
-  HAL_LockTypeDef            Lock;         /* Locking object                 */
+  __IO uint32_t              ErrorCode;      /*!< SPI Error code                           */
 
-  __IO HAL_SPI_StateTypeDef  State;        /* SPI communication state */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+  void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi);             /*!< SPI Tx Completed callback          */
+  void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi);             /*!< SPI Rx Completed callback          */
+  void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi);           /*!< SPI TxRx Completed callback        */
+  void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi);         /*!< SPI Tx Half Completed callback     */
+  void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi);         /*!< SPI Rx Half Completed callback     */
+  void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi);       /*!< SPI TxRx Half Completed callback   */
+  void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi);              /*!< SPI Error callback                 */
+  void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi);          /*!< SPI Abort callback                 */
+  void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi);            /*!< SPI Msp Init callback              */
+  void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi);          /*!< SPI Msp DeInit callback            */
 
-  __IO uint32_t              ErrorCode;    /* SPI Error code */
+#endif  /* USE_HAL_SPI_REGISTER_CALLBACKS */
+} SPI_HandleTypeDef;
+
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+/**
+  * @brief  HAL SPI Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_SPI_TX_COMPLETE_CB_ID             = 0x00U,    /*!< SPI Tx Completed callback ID         */
+  HAL_SPI_RX_COMPLETE_CB_ID             = 0x01U,    /*!< SPI Rx Completed callback ID         */
+  HAL_SPI_TX_RX_COMPLETE_CB_ID          = 0x02U,    /*!< SPI TxRx Completed callback ID       */
+  HAL_SPI_TX_HALF_COMPLETE_CB_ID        = 0x03U,    /*!< SPI Tx Half Completed callback ID    */
+  HAL_SPI_RX_HALF_COMPLETE_CB_ID        = 0x04U,    /*!< SPI Rx Half Completed callback ID    */
+  HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID     = 0x05U,    /*!< SPI TxRx Half Completed callback ID  */
+  HAL_SPI_ERROR_CB_ID                   = 0x06U,    /*!< SPI Error callback ID                */
+  HAL_SPI_ABORT_CB_ID                   = 0x07U,    /*!< SPI Abort callback ID                */
+  HAL_SPI_MSPINIT_CB_ID                 = 0x08U,    /*!< SPI Msp Init callback ID             */
+  HAL_SPI_MSPDEINIT_CB_ID               = 0x09U     /*!< SPI Msp DeInit callback ID           */
+
+} HAL_SPI_CallbackIDTypeDef;
 
-}SPI_HandleTypeDef;
+/**
+  * @brief  HAL SPI Callback pointer definition
+  */
+typedef  void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */
 
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
 /**
   * @}
   */
@@ -163,13 +186,17 @@ typedef struct __SPI_HandleTypeDef
 /** @defgroup SPI_Error_Code SPI Error Code
   * @{
   */
-#define HAL_SPI_ERROR_NONE              0x00000000U   /*!< No error             */
-#define HAL_SPI_ERROR_MODF              0x00000001U   /*!< MODF error           */
-#define HAL_SPI_ERROR_CRC               0x00000002U   /*!< CRC error            */
-#define HAL_SPI_ERROR_OVR               0x00000004U   /*!< OVR error            */
-#define HAL_SPI_ERROR_FRE               0x00000008U   /*!< FRE error            */
-#define HAL_SPI_ERROR_DMA               0x00000010U   /*!< DMA transfer error   */
-#define HAL_SPI_ERROR_FLAG              0x00000020U   /*!< Flag: RXNE,TXE, BSY  */
+#define HAL_SPI_ERROR_NONE              (0x00000000U)   /*!< No error                               */
+#define HAL_SPI_ERROR_MODF              (0x00000001U)   /*!< MODF error                             */
+#define HAL_SPI_ERROR_CRC               (0x00000002U)   /*!< CRC error                              */
+#define HAL_SPI_ERROR_OVR               (0x00000004U)   /*!< OVR error                              */
+#define HAL_SPI_ERROR_FRE               (0x00000008U)   /*!< FRE error                              */
+#define HAL_SPI_ERROR_DMA               (0x00000010U)   /*!< DMA transfer error                     */
+#define HAL_SPI_ERROR_FLAG              (0x00000020U)   /*!< Error on RXNE/TXE/BSY Flag             */
+#define HAL_SPI_ERROR_ABORT             (0x00000040U)   /*!< Error during SPI Abort procedure       */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+#define HAL_SPI_ERROR_INVALID_CALLBACK  (0x00000080U)   /*!< Invalid Callback error                 */
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
 /**
   * @}
   */
@@ -177,7 +204,7 @@ typedef struct __SPI_HandleTypeDef
 /** @defgroup SPI_Mode SPI Mode
   * @{
   */
-#define SPI_MODE_SLAVE                  0x00000000U
+#define SPI_MODE_SLAVE                  (0x00000000U)
 #define SPI_MODE_MASTER                 (SPI_CR1_MSTR | SPI_CR1_SSI)
 /**
   * @}
@@ -186,7 +213,7 @@ typedef struct __SPI_HandleTypeDef
 /** @defgroup SPI_Direction SPI Direction Mode
   * @{
   */
-#define SPI_DIRECTION_2LINES            0x00000000U
+#define SPI_DIRECTION_2LINES            (0x00000000U)
 #define SPI_DIRECTION_2LINES_RXONLY     SPI_CR1_RXONLY
 #define SPI_DIRECTION_1LINE             SPI_CR1_BIDIMODE
 /**
@@ -196,7 +223,7 @@ typedef struct __SPI_HandleTypeDef
 /** @defgroup SPI_Data_Size SPI Data Size
   * @{
   */
-#define SPI_DATASIZE_8BIT               0x00000000U
+#define SPI_DATASIZE_8BIT               (0x00000000U)
 #define SPI_DATASIZE_16BIT              SPI_CR1_DFF
 /**
   * @}
@@ -205,7 +232,7 @@ typedef struct __SPI_HandleTypeDef
 /** @defgroup SPI_Clock_Polarity SPI Clock Polarity
   * @{
   */
-#define SPI_POLARITY_LOW                0x00000000U
+#define SPI_POLARITY_LOW                (0x00000000U)
 #define SPI_POLARITY_HIGH               SPI_CR1_CPOL
 /**
   * @}
@@ -214,7 +241,7 @@ typedef struct __SPI_HandleTypeDef
 /** @defgroup SPI_Clock_Phase SPI Clock Phase
   * @{
   */
-#define SPI_PHASE_1EDGE                 0x00000000U
+#define SPI_PHASE_1EDGE                 (0x00000000U)
 #define SPI_PHASE_2EDGE                 SPI_CR1_CPHA
 /**
   * @}
@@ -224,8 +251,8 @@ typedef struct __SPI_HandleTypeDef
   * @{
   */
 #define SPI_NSS_SOFT                    SPI_CR1_SSM
-#define SPI_NSS_HARD_INPUT              0x00000000U
-#define SPI_NSS_HARD_OUTPUT             0x00040000U
+#define SPI_NSS_HARD_INPUT              (0x00000000U)
+#define SPI_NSS_HARD_OUTPUT             (SPI_CR2_SSOE << 16U)
 /**
   * @}
   */
@@ -233,14 +260,14 @@ typedef struct __SPI_HandleTypeDef
 /** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
   * @{
   */
-#define SPI_BAUDRATEPRESCALER_2         0x00000000U
-#define SPI_BAUDRATEPRESCALER_4         0x00000008U
-#define SPI_BAUDRATEPRESCALER_8         0x00000010U
-#define SPI_BAUDRATEPRESCALER_16        0x00000018U
-#define SPI_BAUDRATEPRESCALER_32        0x00000020U
-#define SPI_BAUDRATEPRESCALER_64        0x00000028U
-#define SPI_BAUDRATEPRESCALER_128       0x00000030U
-#define SPI_BAUDRATEPRESCALER_256       0x00000038U
+#define SPI_BAUDRATEPRESCALER_2         (0x00000000U)
+#define SPI_BAUDRATEPRESCALER_4         (SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_8         (SPI_CR1_BR_1)
+#define SPI_BAUDRATEPRESCALER_16        (SPI_CR1_BR_1 | SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_32        (SPI_CR1_BR_2)
+#define SPI_BAUDRATEPRESCALER_64        (SPI_CR1_BR_2 | SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_128       (SPI_CR1_BR_2 | SPI_CR1_BR_1)
+#define SPI_BAUDRATEPRESCALER_256       (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
 /**
   * @}
   */
@@ -248,7 +275,7 @@ typedef struct __SPI_HandleTypeDef
 /** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission
   * @{
   */
-#define SPI_FIRSTBIT_MSB                0x00000000U
+#define SPI_FIRSTBIT_MSB                (0x00000000U)
 #define SPI_FIRSTBIT_LSB                SPI_CR1_LSBFIRST
 /**
   * @}
@@ -257,8 +284,8 @@ typedef struct __SPI_HandleTypeDef
 /** @defgroup SPI_TI_mode SPI TI Mode
   * @{
   */
-#define SPI_TIMODE_DISABLE             0x00000000U
-#define SPI_TIMODE_ENABLE              SPI_CR2_FRF
+#define SPI_TIMODE_DISABLE              (0x00000000U)
+#define SPI_TIMODE_ENABLE               SPI_CR2_FRF
 /**
   * @}
   */
@@ -266,8 +293,8 @@ typedef struct __SPI_HandleTypeDef
 /** @defgroup SPI_CRC_Calculation SPI CRC Calculation
   * @{
   */
-#define SPI_CRCCALCULATION_DISABLE     0x00000000U
-#define SPI_CRCCALCULATION_ENABLE      SPI_CR1_CRCEN
+#define SPI_CRCCALCULATION_DISABLE      (0x00000000U)
+#define SPI_CRCCALCULATION_ENABLE       SPI_CR1_CRCEN
 /**
   * @}
   */
@@ -285,13 +312,14 @@ typedef struct __SPI_HandleTypeDef
 /** @defgroup SPI_Flags_definition SPI Flags Definition
   * @{
   */
-#define SPI_FLAG_RXNE                   SPI_SR_RXNE   /* SPI status flag: Rx buffer not empty flag */
-#define SPI_FLAG_TXE                    SPI_SR_TXE    /* SPI status flag: Tx buffer empty flag */
-#define SPI_FLAG_BSY                    SPI_SR_BSY    /* SPI status flag: Busy flag */
-#define SPI_FLAG_CRCERR                 SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
-#define SPI_FLAG_MODF                   SPI_SR_MODF   /* SPI Error flag: Mode fault flag */
-#define SPI_FLAG_OVR                    SPI_SR_OVR    /* SPI Error flag: Overrun flag */
+#define SPI_FLAG_RXNE                   SPI_SR_RXNE   /* SPI status flag: Rx buffer not empty flag       */
+#define SPI_FLAG_TXE                    SPI_SR_TXE    /* SPI status flag: Tx buffer empty flag           */
+#define SPI_FLAG_BSY                    SPI_SR_BSY    /* SPI status flag: Busy flag                      */
+#define SPI_FLAG_CRCERR                 SPI_SR_CRCERR /* SPI Error flag: CRC error flag                  */
+#define SPI_FLAG_MODF                   SPI_SR_MODF   /* SPI Error flag: Mode fault flag                 */
+#define SPI_FLAG_OVR                    SPI_SR_OVR    /* SPI Error flag: Overrun flag                    */
 #define SPI_FLAG_FRE                    SPI_SR_FRE    /* SPI Error flag: TI mode frame format error flag */
+#define SPI_FLAG_MASK                   (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE)
 /**
   * @}
   */
@@ -300,7 +328,7 @@ typedef struct __SPI_HandleTypeDef
   * @}
   */
 
-/* Exported macro ------------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
 /** @defgroup SPI_Exported_Macros SPI Exported Macros
   * @{
   */
@@ -310,29 +338,48 @@ typedef struct __SPI_HandleTypeDef
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__)                do{                                                  \
+                                                                    (__HANDLE__)->State = HAL_SPI_STATE_RESET;       \
+                                                                    (__HANDLE__)->MspInitCallback = NULL;            \
+                                                                    (__HANDLE__)->MspDeInitCallback = NULL;          \
+                                                                  } while(0)
+#else
 #define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+#endif
 
-/** @brief  Enable or disable the specified SPI interrupts.
+/** @brief  Enable the specified SPI interrupts.
   * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
-  * @param  __INTERRUPT__ specifies the interrupt source to enable or disable.
+  * @param  __INTERRUPT__ specifies the interrupt source to enable.
+  *         This parameter can be one of the following values:
+  *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg SPI_IT_ERR: Error interrupt enable
+  * @retval None
+  */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__)   SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
+
+/** @brief  Disable the specified SPI interrupts.
+  * @param  __HANDLE__ specifies the SPI handle.
+  *         This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
+  * @param  __INTERRUPT__ specifies the interrupt source to disable.
   *         This parameter can be one of the following values:
   *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
   *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
   *            @arg SPI_IT_ERR: Error interrupt enable
   * @retval None
   */
-#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
-#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__)  CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
 
 /** @brief  Check whether the specified SPI interrupt source is enabled or not.
   * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @param  __INTERRUPT__ specifies the SPI interrupt source to check.
   *          This parameter can be one of the following values:
-  *             @arg SPI_IT_TXE: Tx buffer empty interrupt enable
-  *             @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
-  *             @arg SPI_IT_ERR: Error interrupt enable
+  *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg SPI_IT_ERR: Error interrupt enable
   * @retval The new state of __IT__ (TRUE or FALSE).
   */
 #define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
@@ -365,12 +412,12 @@ typedef struct __SPI_HandleTypeDef
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
-#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__)       \
-  do{                                              \
-    __IO uint32_t tmpreg_modf = 0x00U;             \
-    tmpreg_modf = (__HANDLE__)->Instance->SR;      \
-    (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE); \
-    UNUSED(tmpreg_modf);                           \
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__)             \
+  do{                                                    \
+    __IO uint32_t tmpreg_modf = 0x00U;                   \
+    tmpreg_modf = (__HANDLE__)->Instance->SR;            \
+    CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \
+    UNUSED(tmpreg_modf);                                 \
   } while(0U)
 
 /** @brief  Clear the SPI OVR pending flag.
@@ -403,14 +450,186 @@ typedef struct __SPI_HandleTypeDef
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
-#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |=  SPI_CR1_SPE)
+#define __HAL_SPI_ENABLE(__HANDLE__)  SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
 
 /** @brief  Disable the SPI peripheral.
   * @param  __HANDLE__ specifies the SPI Handle.
   *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
   * @retval None
   */
-#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE))
+#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPI_Private_Macros SPI Private Macros
+  * @{
+  */
+
+/** @brief  Set the SPI transmit-only mode.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define SPI_1LINE_TX(__HANDLE__)  SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
+
+/** @brief  Set the SPI receive-only mode.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define SPI_1LINE_RX(__HANDLE__)  CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
+
+/** @brief  Reset the CRC calculation of the SPI.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\
+                                       SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U)
+
+/** @brief  Check whether the specified SPI flag is set or not.
+  * @param  __SR__  copy of SPI SR regsiter.
+  * @param  __FLAG__ specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+  *            @arg SPI_FLAG_TXE: Transmit buffer empty flag
+  *            @arg SPI_FLAG_CRCERR: CRC error flag
+  *            @arg SPI_FLAG_MODF: Mode fault flag
+  *            @arg SPI_FLAG_OVR: Overrun flag
+  *            @arg SPI_FLAG_BSY: Busy flag
+  *            @arg SPI_FLAG_FRE: Frame format error flag
+  * @retval SET or RESET.
+  */
+#define SPI_CHECK_FLAG(__SR__, __FLAG__)         ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET)
+
+/** @brief  Check whether the specified SPI Interrupt is set or not.
+  * @param  __CR2__  copy of SPI CR2 regsiter.
+  * @param  __INTERRUPT__ specifies the SPI interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg SPI_IT_ERR: Error interrupt enable
+  * @retval SET or RESET.
+  */
+#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__)      ((((__CR2__) & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks if SPI Mode parameter is in allowed range.
+  * @param  __MODE__ specifies the SPI Mode.
+  *         This parameter can be a value of @ref SPI_Mode
+  * @retval None
+  */
+#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \
+                               ((__MODE__) == SPI_MODE_MASTER))
+
+/** @brief  Checks if SPI Direction Mode parameter is in allowed range.
+  * @param  __MODE__ specifies the SPI Direction Mode.
+  *         This parameter can be a value of @ref SPI_Direction
+  * @retval None
+  */
+#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES)        || \
+                                    ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \
+                                    ((__MODE__) == SPI_DIRECTION_1LINE))
+
+/** @brief  Checks if SPI Direction Mode parameter is 2 lines.
+  * @param  __MODE__ specifies the SPI Direction Mode.
+  * @retval None
+  */
+#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES)
+
+/** @brief  Checks if SPI Direction Mode parameter is 1 or 2 lines.
+  * @param  __MODE__ specifies the SPI Direction Mode.
+  * @retval None
+  */
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
+                                                    ((__MODE__) == SPI_DIRECTION_1LINE))
+
+/** @brief  Checks if SPI Data Size parameter is in allowed range.
+  * @param  __DATASIZE__ specifies the SPI Data Size.
+  *         This parameter can be a value of @ref SPI_Data_Size
+  * @retval None
+  */
+#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \
+                                       ((__DATASIZE__) == SPI_DATASIZE_8BIT))
+
+/** @brief  Checks if SPI Serial clock steady state parameter is in allowed range.
+  * @param  __CPOL__ specifies the SPI serial clock steady state.
+  *         This parameter can be a value of @ref SPI_Clock_Polarity
+  * @retval None
+  */
+#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \
+                               ((__CPOL__) == SPI_POLARITY_HIGH))
+
+/** @brief  Checks if SPI Clock Phase parameter is in allowed range.
+  * @param  __CPHA__ specifies the SPI Clock Phase.
+  *         This parameter can be a value of @ref SPI_Clock_Phase
+  * @retval None
+  */
+#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \
+                               ((__CPHA__) == SPI_PHASE_2EDGE))
+
+/** @brief  Checks if SPI Slave Select parameter is in allowed range.
+  * @param  __NSS__ specifies the SPI Slave Select management parameter.
+  *         This parameter can be a value of @ref SPI_Slave_Select_management
+  * @retval None
+  */
+#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT)       || \
+                             ((__NSS__) == SPI_NSS_HARD_INPUT) || \
+                             ((__NSS__) == SPI_NSS_HARD_OUTPUT))
+
+/** @brief  Checks if SPI Baudrate prescaler parameter is in allowed range.
+  * @param  __PRESCALER__ specifies the SPI Baudrate prescaler.
+  *         This parameter can be a value of @ref SPI_BaudRate_Prescaler
+  * @retval None
+  */
+#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2)   || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4)   || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8)   || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16)  || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32)  || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64)  || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256))
+
+/** @brief  Checks if SPI MSB LSB transmission parameter is in allowed range.
+  * @param  __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit).
+  *         This parameter can be a value of @ref SPI_MSB_LSB_transmission
+  * @retval None
+  */
+#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \
+                                   ((__BIT__) == SPI_FIRSTBIT_LSB))
+
+/** @brief  Checks if SPI TI mode parameter is in allowed range.
+  * @param  __MODE__ specifies the SPI TI mode.
+  *         This parameter can be a value of @ref SPI_TI_mode
+  * @retval None
+  */
+#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \
+                                 ((__MODE__) == SPI_TIMODE_ENABLE))
+
+/** @brief  Checks if SPI CRC calculation enabled state is in allowed range.
+  * @param  __CALCULATION__ specifies the SPI CRC calculation enable state.
+  *         This parameter can be a value of @ref SPI_CRC_Calculation
+  * @retval None
+  */
+#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \
+                                                 ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE))
+
+/** @brief  Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range.
+  * @param  __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation.
+  *         This parameter must be a number between Min_Data = 0 and Max_Data = 65535
+  * @retval None
+  */
+#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && ((__POLYNOMIAL__) <= 0xFFFFU) && (((__POLYNOMIAL__)&0x1U) != 0U))
+
+/** @brief  Checks if DMA handle is valid.
+  * @param  __HANDLE__ specifies a DMA Handle.
+  * @retval None
+  */
+#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL)
+
 /**
   * @}
   */
@@ -423,11 +642,17 @@ typedef struct __SPI_HandleTypeDef
 /** @addtogroup SPI_Exported_Functions_Group1
   * @{
   */
-/* Initialization/de-initialization functions  **********************************/
+/* Initialization/de-initialization functions  ********************************/
 HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
-HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi);
 void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
 void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, pSPI_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
 /**
   * @}
   */
@@ -435,16 +660,19 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
 /** @addtogroup SPI_Exported_Functions_Group2
   * @{
   */
-/* I/O operation functions  *****************************************************/
+/* I/O operation functions  ***************************************************/
 HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
 HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size,
+                                          uint32_t Timeout);
 HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
+                                             uint16_t Size);
 HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
+                                              uint16_t Size);
 HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
 HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
 HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
@@ -479,95 +707,6 @@ uint32_t             HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
   * @}
   */
 
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup SPI_Private_Macros SPI Private Macros
-  * @{
-  */
-
-/** @brief  Set the SPI transmit-only mode.
-  * @param  __HANDLE__ specifies the SPI Handle.
-  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
-  * @retval None
-  */
-#define SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
-
-/** @brief  Set the SPI receive-only mode.
-  * @param  __HANDLE__ specifies the SPI Handle.
-  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
-  * @retval None
-  */
-#define SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_BIDIOE))
-
-/** @brief  Reset the CRC calculation of the SPI.
-  * @param  __HANDLE__ specifies the SPI Handle.
-  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
-  * @retval None
-  */
-#define SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_CRCEN);\
-                                     (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0U)
-
-#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
-                           ((MODE) == SPI_MODE_MASTER))
-
-#define IS_SPI_DIRECTION(MODE) (((MODE) == SPI_DIRECTION_2LINES)        || \
-                                ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \
-                                ((MODE) == SPI_DIRECTION_1LINE))
-
-#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
-
-#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES)  || \
-                                                ((MODE) == SPI_DIRECTION_1LINE))
-
-#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
-                                   ((DATASIZE) == SPI_DATASIZE_8BIT))
-
-#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
-                           ((CPOL) == SPI_POLARITY_HIGH))
-
-#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
-                           ((CPHA) == SPI_PHASE_2EDGE))
-
-#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT)       || \
-                         ((NSS) == SPI_NSS_HARD_INPUT) || \
-                         ((NSS) == SPI_NSS_HARD_OUTPUT))
-
-#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2)   || \
-                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_4)   || \
-                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_8)   || \
-                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_16)  || \
-                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_32)  || \
-                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_64)  || \
-                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
-                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
-
-#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
-                               ((BIT) == SPI_FIRSTBIT_LSB))
-
-#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLE) || \
-                             ((MODE) == SPI_TIMODE_ENABLE))
-
-#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLE) || \
-                                             ((CALCULATION) == SPI_CRCCALCULATION_ENABLE))
-
-#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x01U) && ((POLYNOMIAL) <= 0xFFFFU))
-
-/**
-  * @}
-  */
-
-/* Private functions ---------------------------------------------------------*/
-/** @defgroup SPI_Private_Functions SPI Private Functions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
 /**
   * @}
   */
@@ -580,6 +719,6 @@ uint32_t             HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
 }
 #endif
 
-#endif /* __STM32F4xx_HAL_SPI_H */
+#endif /* STM32F4xx_HAL_SPI_H */
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h

@@ -2,43 +2,27 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_tim_ex.h
   * @author  MCD Application Team
-  * @brief   Header file of TIM HAL Extension module.
+  * @brief   Header file of TIM HAL Extended module.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
-  */ 
+  */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_TIM_EX_H
-#define __STM32F4xx_HAL_TIM_EX_H
+#ifndef STM32F4xx_HAL_TIM_EX_H
+#define STM32F4xx_HAL_TIM_EX_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -50,22 +34,21 @@
 
 /** @addtogroup TIMEx
   * @{
-  */ 
+  */
 
-/* Exported types ------------------------------------------------------------*/ 
-/** @defgroup TIMEx_Exported_Types TIM Exported Types
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
   * @{
   */
-  
-/** 
-  * @brief  TIM Hall sensor Configuration Structure definition  
+
+/**
+  * @brief  TIM Hall sensor Configuration Structure definition
   */
 
 typedef struct
 {
-
-  uint32_t IC1Polarity;            /*!< Specifies the active edge of the input signal.
-                                        This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+  uint32_t IC1Polarity;         /*!< Specifies the active edge of the input signal.
+                                     This parameter can be a value of @ref TIM_Input_Capture_Polarity */
 
   uint32_t IC1Prescaler;        /*!< Specifies the Input Capture Prescaler.
                                      This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
@@ -73,296 +56,296 @@ typedef struct
   uint32_t IC1Filter;           /*!< Specifies the input capture filter.
                                      This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
 
-  uint32_t Commutation_Delay;  /*!< Specifies the pulse value to be loaded into the Capture Compare Register. 
-                                    This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
+  uint32_t Commutation_Delay;   /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+                                     This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
 } TIM_HallSensor_InitTypeDef;
-
-/** 
-  * @brief  TIM Master configuration Structure definition  
-  */ 
-typedef struct {
-  uint32_t  MasterOutputTrigger;   /*!< Trigger output (TRGO) selection. 
-                                      This parameter can be a value of @ref TIM_Master_Mode_Selection */
-
-  uint32_t  MasterSlaveMode;       /*!< Master/slave mode selection. 
-                                      This parameter can be a value of @ref TIM_Master_Slave_Mode */
-}TIM_MasterConfigTypeDef;
-
-/** 
-  * @brief  TIM Break and Dead time configuration Structure definition  
-  */ 
-typedef struct
-{
-  uint32_t OffStateRunMode;            /*!< TIM off state in run mode.
-                                         This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
-  uint32_t OffStateIDLEMode;          /*!< TIM off state in IDLE mode.
-                                         This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
-  uint32_t LockLevel;                     /*!< TIM Lock level.
-                                         This parameter can be a value of @ref TIM_Lock_level */                             
-  uint32_t DeadTime;                     /*!< TIM dead Time. 
-                                         This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
-  uint32_t BreakState;                   /*!< TIM Break State. 
-                                         This parameter can be a value of @ref TIM_Break_Input_enable_disable */
-  uint32_t BreakPolarity;                 /*!< TIM Break input polarity. 
-                                         This parameter can be a value of @ref TIM_Break_Polarity */
-  uint32_t AutomaticOutput;               /*!< TIM Automatic Output Enable state. 
-                                         This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */           
-}TIM_BreakDeadTimeConfigTypeDef;
 /**
   * @}
   */
-  
+/* End of exported types -----------------------------------------------------*/
+
 /* Exported constants --------------------------------------------------------*/
-/** @defgroup TIMEx_Exported_Constants  TIM Exported Constants
+/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
   * @{
   */
-  
-/** @defgroup TIMEx_Remap  TIM Remap
+
+/** @defgroup TIMEx_Remap TIM Extended Remapping
   * @{
   */
-#define TIM_TIM2_TIM8_TRGO                     0x00000000U
-#define TIM_TIM2_ETH_PTP                       0x00000400U
-#define TIM_TIM2_USBFS_SOF                     0x00000800U
-#define TIM_TIM2_USBHS_SOF                     0x00000C00U
-#define TIM_TIM5_GPIO                          0x00000000U
-#define TIM_TIM5_LSI                           0x00000040U
-#define TIM_TIM5_LSE                           0x00000080U
-#define TIM_TIM5_RTC                           0x000000C0U
-#define TIM_TIM11_GPIO                         0x00000000U
-#define TIM_TIM11_HSE                          0x00000002U
-
-#if defined(STM32F413xx) || defined(STM32F423xx)
-#define TIM_TIM9_TIM3_TRGO                     0x10000000U
-#define TIM_TIM9_LPTIM                         0x10000010U
-#define TIM_TIM5_TIM3_TRGO                     0x10000000U
-#define TIM_TIM5_LPTIM                         0x10000008U
-#define TIM_TIM1_TIM3_TRGO                     0x10000000U
-#define TIM_TIM1_LPTIM                         0x10000004U
-#endif /* STM32F413xx | STM32F423xx */
-
-#if defined (STM32F446xx) 
-#define TIM_TIM11_SPDIFRX                      0x00000001U
-#endif /* STM32F446xx */
+#if defined (TIM2)
+#if defined(TIM8)
+#define TIM_TIM2_TIM8_TRGO                     0x00000000U                              /*!< TIM2 ITR1 is connected to TIM8 TRGO */
+#else
+#define TIM_TIM2_ETH_PTP                       TIM_OR_ITR1_RMP_0                        /*!< TIM2 ITR1 is connected to PTP trigger output */
+#endif /*  TIM8 */
+#define TIM_TIM2_USBFS_SOF                     TIM_OR_ITR1_RMP_1                        /*!< TIM2 ITR1 is connected to OTG FS SOF */
+#define TIM_TIM2_USBHS_SOF                     (TIM_OR_ITR1_RMP_1 | TIM_OR_ITR1_RMP_0)  /*!< TIM2 ITR1 is connected to OTG HS SOF */
+#endif /* TIM2 */
+
+#define TIM_TIM5_GPIO                          0x00000000U                              /*!< TIM5 TI4 is connected to GPIO */
+#define TIM_TIM5_LSI                           TIM_OR_TI4_RMP_0                         /*!< TIM5 TI4 is connected to LSI */
+#define TIM_TIM5_LSE                           TIM_OR_TI4_RMP_1                         /*!< TIM5 TI4 is connected to LSE */
+#define TIM_TIM5_RTC                           (TIM_OR_TI4_RMP_1 | TIM_OR_TI4_RMP_0)    /*!< TIM5 TI4 is connected to the RTC wakeup interrupt */
+
+#define TIM_TIM11_GPIO                         0x00000000U                              /*!< TIM11 TI1 is connected to GPIO */
+#define TIM_TIM11_HSE                          TIM_OR_TI1_RMP_1                         /*!< TIM11 TI1 is connected to HSE_RTC clock */
+#if defined(SPDIFRX)
+#define TIM_TIM11_SPDIFRX                      TIM_OR_TI1_RMP_0                         /*!< TIM11 TI1 is connected to SPDIFRX_FRAME_SYNC */
+#endif /* SPDIFRX*/
+
+#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP)
+#define LPTIM_REMAP_MASK                       0x10000000U
+
+#define TIM_TIM9_TIM3_TRGO                     LPTIM_REMAP_MASK                             /*!< TIM9 ITR1 is connected to TIM3 TRGO */
+#define TIM_TIM9_LPTIM                         (LPTIM_REMAP_MASK | LPTIM_OR_TIM9_ITR1_RMP)  /*!< TIM9 ITR1 is connected to LPTIM1 output */
+
+#define TIM_TIM5_TIM3_TRGO                     LPTIM_REMAP_MASK                             /*!< TIM5 ITR1 is connected to TIM3 TRGO */
+#define TIM_TIM5_LPTIM                         (LPTIM_REMAP_MASK | LPTIM_OR_TIM5_ITR1_RMP)  /*!< TIM5 ITR1 is connected to LPTIM1 output */
+
+#define TIM_TIM1_TIM3_TRGO                     LPTIM_REMAP_MASK                             /*!< TIM1 ITR2 is connected to TIM3 TRGO */
+#define TIM_TIM1_LPTIM                         (LPTIM_REMAP_MASK | LPTIM_OR_TIM1_ITR2_RMP)  /*!< TIM1 ITR2 is connected to LPTIM1 output */
+#endif /* LPTIM_OR_TIM1_ITR2_RMP &&  LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */
 /**
   * @}
   */
 
-#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)
-/** @defgroup TIMEx_SystemBreakInput  TIM System Break Input
+/**
+  * @}
+  */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
   * @{
   */
-#define TIM_SYSTEMBREAKINPUT_HARDFAULT     0x00000001U /* Core Lockup lock output(Hardfault) is connected to Break Input of TIM1 and TIM8 */
-#define TIM_SYSTEMBREAKINPUT_PVD           0x00000004U /* PVD Interrupt is connected to Break Input of TIM1 and TIM8 */
-#define TIM_SYSTEMBREAKINPUT_HARDFAULT_PVD 0x00000005U /* Core Lockup lock output(Hardfault) and PVD Interrupt are connected to Break Input of TIM1 and TIM8 */   
+
 /**
   * @}
   */
-#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */
+/* End of exported macro -----------------------------------------------------*/
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
+  * @{
+  */
+#if defined(SPDIFRX)
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                       \
+        ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)      || \
+                                    ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
+                                    ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
+         (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                                    ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                                    ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                                    ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+         (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                                    ((TIM_REMAP) == TIM_TIM11_SPDIFRX)       || \
+                                    ((TIM_REMAP) == TIM_TIM11_HSE))))
+#elif defined(TIM2)
+#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP)
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                       \
+        ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)      || \
+                                    ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
+                                    ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
+         (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                                    ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                                    ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                                    ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+         (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                                    ((TIM_REMAP) == TIM_TIM11_HSE)))         || \
+         (((INSTANCE) == TIM1)  && (((TIM_REMAP) == TIM_TIM1_TIM3_TRGO)      || \
+                                    ((TIM_REMAP) == TIM_TIM1_LPTIM)))        || \
+         (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_TIM3_TRGO)      || \
+                                    ((TIM_REMAP) == TIM_TIM5_LPTIM)))        || \
+         (((INSTANCE) == TIM9)  && (((TIM_REMAP) == TIM_TIM9_TIM3_TRGO)      || \
+                                    ((TIM_REMAP) == TIM_TIM9_LPTIM))))
+#elif defined(TIM8)
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                       \
+        ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)      || \
+                                    ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
+                                    ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
+         (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                                    ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                                    ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                                    ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+         (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                                    ((TIM_REMAP) == TIM_TIM11_HSE))))
+#else
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                       \
+        ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_ETH_PTP)        || \
+                                    ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
+                                    ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
+         (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                                    ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                                    ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                                    ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+         (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                                    ((TIM_REMAP) == TIM_TIM11_HSE))))
+#endif /* LPTIM_OR_TIM1_ITR2_RMP &&  LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */
+#else
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                       \
+        ((((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                                    ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                                    ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                                    ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+         (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                                    ((TIM_REMAP) == TIM_TIM11_HSE))))
+#endif /* SPDIFRX */
 
 /**
   * @}
-  */ 
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup TIMEx_Exported_Functions
-  * @{
   */
+/* End of private macro ------------------------------------------------------*/
 
-/** @addtogroup TIMEx_Exported_Functions_Group1
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
   * @{
   */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+ *  @brief    Timer Hall Sensor functions
+ * @{
+ */
 /*  Timer Hall Sensor functions  **********************************************/
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
 
-void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
-void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
 
- /* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
 /* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
 /* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
 /**
   * @}
   */
 
-/** @addtogroup TIMEx_Exported_Functions_Group2
-  * @{
-  */
+/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+ *  @brief   Timer Complementary Output Compare functions
+ * @{
+ */
 /*  Timer Complementary Output Compare functions  *****************************/
 /* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
 
 /* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
 
 /* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
 /**
   * @}
   */
 
-/** @addtogroup TIMEx_Exported_Functions_Group3
-  * @{
-  */
+/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+ *  @brief    Timer Complementary PWM functions
+ * @{
+ */
 /*  Timer Complementary PWM functions  ****************************************/
 /* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
 
 /* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
 /* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
 /**
   * @}
   */
 
-/** @addtogroup TIMEx_Exported_Functions_Group4
-  * @{
-  */
+/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+ *  @brief    Timer Complementary One Pulse functions
+ * @{
+ */
 /*  Timer Complementary One Pulse functions  **********************************/
 /* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
 
 /* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
 /**
   * @}
   */
 
-/** @addtogroup TIMEx_Exported_Functions_Group5
-  * @{
-  */
-/* Extension Control functions  ************************************************/
-HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
-HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
-HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
-HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
-HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
-HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
+/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+ *  @brief    Peripheral Control functions
+ * @{
+ */
+/* Extended Control functions  ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef *sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
 /**
   * @}
   */
 
-/** @addtogroup TIMEx_Exported_Functions_Group6
+/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
+  * @brief    Extended Callbacks functions
   * @{
-  */ 
-/* Extension Callback *********************************************************/
-void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
-void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
-void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+  */
+/* Extended Callback **********************************************************/
+void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
 /**
   * @}
   */
 
-/** @addtogroup TIMEx_Exported_Functions_Group7
+/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+  * @brief    Extended Peripheral State functions
   * @{
   */
-/* Extension Peripheral State functions  **************************************/
-HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
+/* Extended Peripheral State functions  ***************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
-  */ 
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup TIMEx_Private_Macros TIM Private Macros
-  * @{
   */
-#if defined (STM32F446xx) 
-#define IS_TIM_REMAP(TIM_REMAP)   (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
-                                  ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
-                                  ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
-                                  ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
-                                  ((TIM_REMAP) == TIM_TIM5_GPIO)||\
-                                  ((TIM_REMAP) == TIM_TIM5_LSI)||\
-                                  ((TIM_REMAP) == TIM_TIM5_LSE)||\
-                                  ((TIM_REMAP) == TIM_TIM5_RTC)||\
-                                  ((TIM_REMAP) == TIM_TIM11_GPIO)||\
-                                  ((TIM_REMAP) == TIM_TIM11_SPDIFRX)||\
-                                  ((TIM_REMAP) == TIM_TIM11_HSE))
-#elif defined(STM32F413xx) || defined(STM32F423xx)
-#define IS_TIM_REMAP(TIM_REMAP)   (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
-                                  ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
-                                  ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
-                                  ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
-                                  ((TIM_REMAP) == TIM_TIM5_GPIO)||\
-                                  ((TIM_REMAP) == TIM_TIM5_LSI)||\
-                                  ((TIM_REMAP) == TIM_TIM5_LSE)||\
-                                  ((TIM_REMAP) == TIM_TIM5_RTC)||\
-                                  ((TIM_REMAP) == TIM_TIM11_GPIO)||\
-                                  ((TIM_REMAP) == TIM_TIM11_HSE)||\
-                                  ((TIM_REMAP) == TIM_TIM9_TIM3_TRGO)||\
-                                  ((TIM_REMAP) == TIM_TIM9_LPTIM)||\
-                                  ((TIM_REMAP) == TIM_TIM5_TIM3_TRGO)||\
-                                  ((TIM_REMAP) == TIM_TIM5_LPTIM)||\
-                                  ((TIM_REMAP) == TIM_TIM1_TIM3_TRGO)||\
-                                  ((TIM_REMAP) == TIM_TIM1_LPTIM))
-#else
-#define IS_TIM_REMAP(TIM_REMAP)   (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
-                                  ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
-                                  ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
-                                  ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
-                                  ((TIM_REMAP) == TIM_TIM5_GPIO)||\
-                                  ((TIM_REMAP) == TIM_TIM5_LSI)||\
-                                  ((TIM_REMAP) == TIM_TIM5_LSE)||\
-                                  ((TIM_REMAP) == TIM_TIM5_RTC)||\
-                                  ((TIM_REMAP) == TIM_TIM11_GPIO)||\
-                                  ((TIM_REMAP) == TIM_TIM11_HSE))
-#endif /* STM32F446xx */
-
-#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)
-#define IS_TIM_SYSTEMBREAKINPUT(BREAKINPUT)   (((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_HARDFAULT)||\
-                                               ((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_PVD)||\
-                                               ((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_HARDFAULT_PVD))
-
-#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */ 
-
-#define IS_TIM_DEADTIME(DEADTIME)      ((DEADTIME) <= 0xFFU) 
-/**
-  * @}
-  */  
-  
-/* Private functions ---------------------------------------------------------*/
-/** @defgroup TIMEx_Private_Functions TIM Private Functions
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions----------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions
   * @{
   */
-  
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
 /**
   * @}
   */
+/* End of private functions --------------------------------------------------*/
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
   */
-    
+
 #ifdef __cplusplus
 }
 #endif
 
-#endif /* __STM32F4xx_HAL_TIM_EX_H */
+
+#endif /* STM32F4xx_HAL_TIM_EX_H */
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c

@@ -21,29 +21,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -66,11 +50,11 @@
   * @{
   */
 /**
-  * @brief STM32F4xx HAL Driver version number V1.7.4
+  * @brief STM32F4xx HAL Driver version number V1.7.5
   */
 #define __STM32F4xx_HAL_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
 #define __STM32F4xx_HAL_VERSION_SUB1   (0x07U) /*!< [23:16] sub1 version */
-#define __STM32F4xx_HAL_VERSION_SUB2   (0x04U) /*!< [15:8]  sub2 version */
+#define __STM32F4xx_HAL_VERSION_SUB2   (0x05U) /*!< [15:8]  sub2 version */
 #define __STM32F4xx_HAL_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */ 
 #define __STM32F4xx_HAL_VERSION         ((__STM32F4xx_HAL_VERSION_MAIN << 24U)\
                                         |(__STM32F4xx_HAL_VERSION_SUB1 << 16U)\
@@ -542,15 +526,30 @@ void HAL_DisableCompensationCell(void)
 }
 
 /**
-  * @brief Return the unique device identifier (UID based on 96 bits)
-  * @param UID pointer to 3 words array.
+  * @brief  Returns first word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw0(void)
+{
+  return (READ_REG(*((uint32_t *)UID_BASE)));
+}
+
+/**
+  * @brief  Returns second word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw1(void)
+{
+  return (READ_REG(*((uint32_t *)(UID_BASE + 4U))));
+}
+
+/**
+  * @brief  Returns third word of the unique device identifier (UID based on 96 bits)
   * @retval Device identifier
   */
-void HAL_GetUID(uint32_t *UID)
+uint32_t HAL_GetUIDw2(void)
 {
-  UID[0] = (uint32_t)(READ_REG(*((uint32_t *)UID_BASE)));
-  UID[1] = (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE + 4U))));
-  UID[2] = (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE + 8U))));
+  return (READ_REG(*((uint32_t *)(UID_BASE + 8U))));
 }
 
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c

@@ -157,34 +157,90 @@
   (#) Optionally, in case of usage of DMA:
         (++) Deinitialize the DMA using function HAL_DMA_DeInit().
         (++) Disable the NVIC for DMA using function HAL_NVIC_DisableIRQ(DMAx_Channelx_IRQn)   
+                      *** Callback registration ***
+  ==============================================================================
+    [..]
+
+     The compilation flag USE_HAL_ADC_REGISTER_CALLBACKS, when set to 1,
+     allows the user to configure dynamically the driver callbacks.
+     Use Functions @ref HAL_ADC_RegisterCallback()
+     to register an interrupt callback.
+    [..]
+
+     Function @ref HAL_ADC_RegisterCallback() allows to register following callbacks:
+       (+) ConvCpltCallback               : ADC conversion complete callback
+       (+) ConvHalfCpltCallback           : ADC conversion DMA half-transfer callback
+       (+) LevelOutOfWindowCallback       : ADC analog watchdog 1 callback
+       (+) ErrorCallback                  : ADC error callback
+       (+) InjectedConvCpltCallback       : ADC group injected conversion complete callback
+       (+) InjectedQueueOverflowCallback  : ADC group injected context queue overflow callback
+       (+) LevelOutOfWindow2Callback      : ADC analog watchdog 2 callback
+       (+) LevelOutOfWindow3Callback      : ADC analog watchdog 3 callback
+       (+) EndOfSamplingCallback          : ADC end of sampling callback
+       (+) MspInitCallback                : ADC Msp Init callback
+       (+) MspDeInitCallback              : ADC Msp DeInit callback
+     This function takes as parameters the HAL peripheral handle, the Callback ID
+     and a pointer to the user callback function.
+    [..]
+
+     Use function @ref HAL_ADC_UnRegisterCallback to reset a callback to the default
+     weak function.
+    [..]
+
+     @ref HAL_ADC_UnRegisterCallback takes as parameters the HAL peripheral handle,
+     and the Callback ID.
+     This function allows to reset following callbacks:
+       (+) ConvCpltCallback               : ADC conversion complete callback
+       (+) ConvHalfCpltCallback           : ADC conversion DMA half-transfer callback
+       (+) LevelOutOfWindowCallback       : ADC analog watchdog 1 callback
+       (+) ErrorCallback                  : ADC error callback
+       (+) InjectedConvCpltCallback       : ADC group injected conversion complete callback
+       (+) InjectedQueueOverflowCallback  : ADC group injected context queue overflow callback
+       (+) LevelOutOfWindow2Callback      : ADC analog watchdog 2 callback
+       (+) LevelOutOfWindow3Callback      : ADC analog watchdog 3 callback
+       (+) EndOfSamplingCallback          : ADC end of sampling callback
+       (+) MspInitCallback                : ADC Msp Init callback
+       (+) MspDeInitCallback              : ADC Msp DeInit callback
+     [..]
+
+     By default, after the @ref HAL_ADC_Init() and when the state is @ref HAL_ADC_STATE_RESET
+     all callbacks are set to the corresponding weak functions:
+     examples @ref HAL_ADC_ConvCpltCallback(), @ref HAL_ADC_ErrorCallback().
+     Exception done for MspInit and MspDeInit functions that are
+     reset to the legacy weak functions in the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() only when
+     these callbacks are null (not registered beforehand).
+    [..]
+
+     If MspInit or MspDeInit are not null, the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit()
+     keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state.
+     [..]
+
+     Callbacks can be registered/unregistered in @ref HAL_ADC_STATE_READY state only.
+     Exception done MspInit/MspDeInit functions that can be registered/unregistered
+     in @ref HAL_ADC_STATE_READY or @ref HAL_ADC_STATE_RESET state,
+     thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
+    [..]
+
+     Then, the user first registers the MspInit/MspDeInit user callbacks
+     using @ref HAL_ADC_RegisterCallback() before calling @ref HAL_ADC_DeInit()
+     or @ref HAL_ADC_Init() function.
+     [..]
+
+     When the compilation flag USE_HAL_ADC_REGISTER_CALLBACKS is set to 0 or
+     not defined, the callback registration feature is not available and all callbacks
+     are set to the corresponding weak functions.
 
     @endverbatim
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -283,14 +339,30 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc)
   
   if(hadc->State == HAL_ADC_STATE_RESET)
   {
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+    /* Init the ADC Callback settings */
+    hadc->ConvCpltCallback              = HAL_ADC_ConvCpltCallback;                 /* Legacy weak callback */
+    hadc->ConvHalfCpltCallback          = HAL_ADC_ConvHalfCpltCallback;             /* Legacy weak callback */
+    hadc->LevelOutOfWindowCallback      = HAL_ADC_LevelOutOfWindowCallback;         /* Legacy weak callback */
+    hadc->ErrorCallback                 = HAL_ADC_ErrorCallback;                    /* Legacy weak callback */
+    hadc->InjectedConvCpltCallback      = HAL_ADCEx_InjectedConvCpltCallback;       /* Legacy weak callback */
+    if (hadc->MspInitCallback == NULL)
+    {
+      hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit  */
+    }
+
+    /* Init the low level hardware */
+    hadc->MspInitCallback(hadc);
+#else
+    /* Init the low level hardware */
+    HAL_ADC_MspInit(hadc);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+
     /* Initialize ADC error code */
     ADC_CLEAR_ERRORCODE(hadc);
     
     /* Allocate lock resource and initialize it */
     hadc->Lock = HAL_UNLOCKED;
-    
-    /* Init the low level hardware */
-    HAL_ADC_MspInit(hadc);
   }
   
   /* Configuration of ADC parameters if previous preliminary actions are      */ 
@@ -355,8 +427,18 @@ HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc)
   /* correctly completed.                                                     */
   if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
   {
-    /* DeInit the low level hardware */
-    HAL_ADC_MspDeInit(hadc);
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+  if (hadc->MspDeInitCallback == NULL)
+  {
+    hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit  */
+  }
+
+  /* DeInit the low level hardware: RCC clock, NVIC */
+  hadc->MspDeInitCallback(hadc);
+#else
+  /* DeInit the low level hardware: RCC clock, NVIC */
+  HAL_ADC_MspDeInit(hadc);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
     
     /* Set ADC error code to none */
     ADC_CLEAR_ERRORCODE(hadc);
@@ -372,6 +454,208 @@ HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc)
   return tmp_hal_status;
 }
 
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  Register a User ADC Callback
+  *         To be used instead of the weak predefined callback
+  * @param  hadc Pointer to a ADC_HandleTypeDef structure that contains
+  *                the configuration information for the specified ADC.
+  * @param  CallbackID ID of the callback to be registered
+  *         This parameter can be one of the following values:
+  *          @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID      ADC conversion complete callback ID
+  *          @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID          ADC conversion DMA half-transfer callback ID
+  *          @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID    ADC analog watchdog 1 callback ID
+  *          @arg @ref HAL_ADC_ERROR_CB_ID                    ADC error callback ID
+  *          @arg @ref HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID  ADC group injected conversion complete callback ID
+  *          @arg @ref HAL_ADC_INJ_QUEUE_OVEFLOW_CB_ID        ADC group injected context queue overflow callback ID
+  *          @arg @ref HAL_ADC_MSPINIT_CB_ID                  ADC Msp Init callback ID
+  *          @arg @ref HAL_ADC_MSPDEINIT_CB_ID                ADC Msp DeInit callback ID
+  * @param  pCallback pointer to the Callback function
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, pADC_CallbackTypeDef pCallback)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  if (pCallback == NULL)
+  {
+    /* Update the error code */
+    hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK;
+
+    return HAL_ERROR;
+  }
+
+  if ((hadc->State & HAL_ADC_STATE_READY) != 0UL)
+  {
+    switch (CallbackID)
+    {
+      case HAL_ADC_CONVERSION_COMPLETE_CB_ID :
+        hadc->ConvCpltCallback = pCallback;
+        break;
+
+      case HAL_ADC_CONVERSION_HALF_CB_ID :
+        hadc->ConvHalfCpltCallback = pCallback;
+        break;
+
+      case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID :
+        hadc->LevelOutOfWindowCallback = pCallback;
+        break;
+
+      case HAL_ADC_ERROR_CB_ID :
+        hadc->ErrorCallback = pCallback;
+        break;
+
+      case HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID :
+        hadc->InjectedConvCpltCallback = pCallback;
+        break;
+
+      case HAL_ADC_MSPINIT_CB_ID :
+        hadc->MspInitCallback = pCallback;
+        break;
+
+      case HAL_ADC_MSPDEINIT_CB_ID :
+        hadc->MspDeInitCallback = pCallback;
+        break;
+
+      default :
+        /* Update the error code */
+        hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK;
+
+        /* Return error status */
+        status = HAL_ERROR;
+        break;
+    }
+  }
+  else if (HAL_ADC_STATE_RESET == hadc->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_ADC_MSPINIT_CB_ID :
+        hadc->MspInitCallback = pCallback;
+        break;
+
+      case HAL_ADC_MSPDEINIT_CB_ID :
+        hadc->MspDeInitCallback = pCallback;
+        break;
+
+      default :
+        /* Update the error code */
+        hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK;
+
+        /* Return error status */
+        status = HAL_ERROR;
+        break;
+    }
+  }
+  else
+  {
+    /* Update the error code */
+    hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK;
+
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Unregister a ADC Callback
+  *         ADC callback is redirected to the weak predefined callback
+  * @param  hadc Pointer to a ADC_HandleTypeDef structure that contains
+  *                the configuration information for the specified ADC.
+  * @param  CallbackID ID of the callback to be unregistered
+  *         This parameter can be one of the following values:
+  *          @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID      ADC conversion complete callback ID
+  *          @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID          ADC conversion DMA half-transfer callback ID
+  *          @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID    ADC analog watchdog 1 callback ID
+  *          @arg @ref HAL_ADC_ERROR_CB_ID                    ADC error callback ID
+  *          @arg @ref HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID  ADC group injected conversion complete callback ID
+  *          @arg @ref HAL_ADC_INJ_QUEUE_OVEFLOW_CB_ID        ADC group injected context queue overflow callback ID
+  *          @arg @ref HAL_ADC_MSPINIT_CB_ID                  ADC Msp Init callback ID
+  *          @arg @ref HAL_ADC_MSPDEINIT_CB_ID                ADC Msp DeInit callback ID
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  if ((hadc->State & HAL_ADC_STATE_READY) != 0UL)
+  {
+    switch (CallbackID)
+    {
+      case HAL_ADC_CONVERSION_COMPLETE_CB_ID :
+        hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback;
+        break;
+
+      case HAL_ADC_CONVERSION_HALF_CB_ID :
+        hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback;
+        break;
+
+      case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID :
+        hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback;
+        break;
+
+      case HAL_ADC_ERROR_CB_ID :
+        hadc->ErrorCallback = HAL_ADC_ErrorCallback;
+        break;
+
+      case HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID :
+        hadc->InjectedConvCpltCallback = HAL_ADCEx_InjectedConvCpltCallback;
+        break;
+
+      case HAL_ADC_MSPINIT_CB_ID :
+        hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit              */
+        break;
+
+      case HAL_ADC_MSPDEINIT_CB_ID :
+        hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit            */
+        break;
+
+      default :
+        /* Update the error code */
+        hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK;
+
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else if (HAL_ADC_STATE_RESET == hadc->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_ADC_MSPINIT_CB_ID :
+        hadc->MspInitCallback = HAL_ADC_MspInit;                   /* Legacy weak MspInit              */
+        break;
+
+      case HAL_ADC_MSPDEINIT_CB_ID :
+        hadc->MspDeInitCallback = HAL_ADC_MspDeInit;               /* Legacy weak MspDeInit            */
+        break;
+
+      default :
+        /* Update the error code */
+        hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK;
+
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else
+  {
+    /* Update the error code */
+    hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK;
+
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  return status;
+}
+
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+
 /**
   * @brief  Initializes the ADC MSP.
   * @param  hadc pointer to a ADC_HandleTypeDef structure that contains
@@ -507,12 +791,20 @@ HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc)
     /* Check if Multimode enabled */
     if(HAL_IS_BIT_CLR(tmpADC_Common->CCR, ADC_CCR_MULTI))
     {
-      /* if no external trigger present enable software conversion of regular channels */
-      if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) 
+#if defined(ADC2) && defined(ADC3)
+      if((hadc->Instance == ADC1) || ((hadc->Instance == ADC2) && ((ADC->CCR & ADC_CCR_MULTI_Msk) < ADC_CCR_MULTI_0)) \
+                                  || ((hadc->Instance == ADC3) && ((ADC->CCR & ADC_CCR_MULTI_Msk) < ADC_CCR_MULTI_4)))
       {
-        /* Enable the selected ADC software conversion for regular group */
-        hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+#endif /* ADC2 || ADC3 */
+        /* if no external trigger present enable software conversion of regular channels */
+        if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) 
+        {
+          /* Enable the selected ADC software conversion for regular group */
+          hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+        }
+#if defined(ADC2) && defined(ADC3)
       }
+#endif /* ADC2 || ADC3 */
     }
     else
     {
@@ -807,12 +1099,20 @@ HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc)
     /* Check if Multimode enabled */
     if(HAL_IS_BIT_CLR(tmpADC_Common->CCR, ADC_CCR_MULTI))
     {
-      /* if no external trigger present enable software conversion of regular channels */
-      if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) 
+#if defined(ADC2) && defined(ADC3)
+      if((hadc->Instance == ADC1) || ((hadc->Instance == ADC2) && ((ADC->CCR & ADC_CCR_MULTI_Msk) < ADC_CCR_MULTI_0)) \
+                                  || ((hadc->Instance == ADC3) && ((ADC->CCR & ADC_CCR_MULTI_Msk) < ADC_CCR_MULTI_4)))
       {
-        /* Enable the selected ADC software conversion for regular group */
-        hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+#endif /* ADC2 || ADC3 */
+        /* if no external trigger present enable software conversion of regular channels */
+        if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) 
+        {
+          /* Enable the selected ADC software conversion for regular group */
+          hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+        }
+#if defined(ADC2) && defined(ADC3)
       }
+#endif /* ADC2 || ADC3 */
     }
     else
     {
@@ -922,8 +1222,12 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
       }
     }
     
-    /* Conversion complete callback */ 
+    /* Conversion complete callback */
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+    hadc->ConvCpltCallback(hadc);
+#else
     HAL_ADC_ConvCpltCallback(hadc);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
     
     /* Clear regular group conversion flag */
     __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC);
@@ -965,7 +1269,12 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
     }
 
     /* Conversion complete callback */ 
-    HAL_ADCEx_InjectedConvCpltCallback(hadc);
+    /* Conversion complete callback */ 
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+      hadc->InjectedConvCpltCallback(hadc);
+#else
+      HAL_ADCEx_InjectedConvCpltCallback(hadc);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
     
     /* Clear injected group conversion flag */
     __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JSTRT | ADC_FLAG_JEOC));
@@ -981,8 +1290,12 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
       /* Set ADC state */
       SET_BIT(hadc->State, HAL_ADC_STATE_AWD1);
       
-      /* Level out of window callback */ 
+      /* Level out of window callback */
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+      hadc->LevelOutOfWindowCallback(hadc);
+#else
       HAL_ADC_LevelOutOfWindowCallback(hadc);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
       
       /* Clear the ADC analog watchdog flag */
       __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD);
@@ -1005,7 +1318,11 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
     __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
     
     /* Error callback */ 
-    HAL_ADC_ErrorCallback(hadc);
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+      hadc->ErrorCallback(hadc);
+#else
+      HAL_ADC_ErrorCallback(hadc);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
     
     /* Clear the Overrun flag */
     __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
@@ -1117,12 +1434,20 @@ HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, ui
     /* Check if Multimode enabled */
     if(HAL_IS_BIT_CLR(tmpADC_Common->CCR, ADC_CCR_MULTI))
     {
-      /* if no external trigger present enable software conversion of regular channels */
-      if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) 
+#if defined(ADC2) && defined(ADC3)
+      if((hadc->Instance == ADC1) || ((hadc->Instance == ADC2) && ((ADC->CCR & ADC_CCR_MULTI_Msk) < ADC_CCR_MULTI_0)) \
+                                  || ((hadc->Instance == ADC3) && ((ADC->CCR & ADC_CCR_MULTI_Msk) < ADC_CCR_MULTI_4)))
       {
-        /* Enable the selected ADC software conversion for regular group */
-        hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+#endif /* ADC2 || ADC3 */
+        /* if no external trigger present enable software conversion of regular channels */
+        if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) 
+        {
+          /* Enable the selected ADC software conversion for regular group */
+          hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+        }
+#if defined(ADC2) && defined(ADC3)
       }
+#endif /* ADC2 || ADC3 */
     }
     else
     {
@@ -1356,17 +1681,28 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConf
     /* control register)                                                    */
     tmpADC_Common = ADC_COMMON_REGISTER(hadc);
 
-  /* if ADC1 Channel_18 is selected enable VBAT Channel */
+  /* if ADC1 Channel_18 is selected for VBAT Channel ennable VBATE */
   if ((hadc->Instance == ADC1) && (sConfig->Channel == ADC_CHANNEL_VBAT))
   {
+    /* Disable the TEMPSENSOR channel in case of using board with multiplixed ADC_CHANNEL_VBAT & ADC_CHANNEL_TEMPSENSOR*/    
+    if ((uint16_t)ADC_CHANNEL_TEMPSENSOR == (uint16_t)ADC_CHANNEL_VBAT)
+    {
+      tmpADC_Common->CCR &= ~ADC_CCR_TSVREFE;
+    }
     /* Enable the VBAT channel*/
     tmpADC_Common->CCR |= ADC_CCR_VBATE;
   }
   
-  /* if ADC1 Channel_16 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */
+  /* if ADC1 Channel_16 or Channel_18 is selected for Temperature sensor or 
+     Channel_17 is selected for VREFINT enable TSVREFE */
   if ((hadc->Instance == ADC1) && ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) || (sConfig->Channel == ADC_CHANNEL_VREFINT)))
   {
-    /* Enable the TSVREFE channel*/
+    /* Disable the VBAT channel in case of using board with multiplixed ADC_CHANNEL_VBAT & ADC_CHANNEL_TEMPSENSOR*/
+    if ((uint16_t)ADC_CHANNEL_TEMPSENSOR == (uint16_t)ADC_CHANNEL_VBAT)
+    {
+      tmpADC_Common->CCR &= ~ADC_CCR_VBATE;
+    }
+    /* Enable the Temperature sensor and VREFINT channel*/
     tmpADC_Common->CCR |= ADC_CCR_TSVREFE;
     
     if((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR))
@@ -1568,7 +1904,7 @@ static void ADC_Init(ADC_HandleTypeDef* hadc)
   
   /* Enable or disable ADC continuous conversion mode */
   hadc->Instance->CR2 &= ~(ADC_CR2_CONT);
-  hadc->Instance->CR2 |= ADC_CR2_CONTINUOUS(hadc->Init.ContinuousConvMode);
+  hadc->Instance->CR2 |= ADC_CR2_CONTINUOUS((uint32_t)hadc->Init.ContinuousConvMode);
   
   if(hadc->Init.DiscontinuousConvMode != DISABLE)
   {
@@ -1593,7 +1929,7 @@ static void ADC_Init(ADC_HandleTypeDef* hadc)
   
   /* Enable or disable ADC DMA continuous request */
   hadc->Instance->CR2 &= ~(ADC_CR2_DDS);
-  hadc->Instance->CR2 |= ADC_CR2_DMAContReq(hadc->Init.DMAContinuousRequests);
+  hadc->Instance->CR2 |= ADC_CR2_DMAContReq((uint32_t)hadc->Init.DMAContinuousRequests);
   
   /* Enable or disable ADC end of conversion selection */
   hadc->Instance->CR2 &= ~(ADC_CR2_EOCS);
@@ -1644,12 +1980,28 @@ static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma)
     }
     
     /* Conversion complete callback */
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+    hadc->ConvCpltCallback(hadc);
+#else
     HAL_ADC_ConvCpltCallback(hadc);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
   }
-  else
+  else /* DMA and-or internal error occurred */
   {
-    /* Call DMA error callback */
-    hadc->DMA_Handle->XferErrorCallback(hdma);
+    if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) != 0UL)
+    {
+      /* Call HAL ADC Error Callback function */
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+      hadc->ErrorCallback(hadc);
+#else
+      HAL_ADC_ErrorCallback(hadc);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+    }
+	else
+	{
+      /* Call DMA error callback */
+      hadc->DMA_Handle->XferErrorCallback(hdma);
+    }
   }
 }
 
@@ -1662,8 +2014,12 @@ static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma)
 static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma)   
 {
   ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-  /* Conversion complete callback */
-  HAL_ADC_ConvHalfCpltCallback(hadc); 
+   /* Half conversion callback */
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+  hadc->ConvHalfCpltCallback(hadc);
+#else
+  HAL_ADC_ConvHalfCpltCallback(hadc);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
 }
 
 /**
@@ -1678,7 +2034,12 @@ static void ADC_DMAError(DMA_HandleTypeDef *hdma)
   hadc->State= HAL_ADC_STATE_ERROR_DMA;
   /* Set ADC error code to DMA error */
   hadc->ErrorCode |= HAL_ADC_ERROR_DMA;
-  HAL_ADC_ErrorCallback(hadc); 
+   /* Error callback */
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+  hadc->ErrorCallback(hadc);
+#else
+  HAL_ADC_ErrorCallback(hadc);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
 }
 
 /**

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c

@@ -84,29 +84,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c

@@ -68,29 +68,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c

@@ -83,29 +83,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -367,13 +351,21 @@ HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
   /* Get DMA steam Base Address */  
   regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma);
   
+  /* Clean all callbacks */
+  hdma->XferCpltCallback = NULL;
+  hdma->XferHalfCpltCallback = NULL;
+  hdma->XferM1CpltCallback = NULL;
+  hdma->XferM1HalfCpltCallback = NULL;
+  hdma->XferErrorCallback = NULL;
+  hdma->XferAbortCallback = NULL;
+
   /* Clear all interrupt flags at correct offset within the register */
   regs->IFCR = 0x3FU << hdma->StreamIndex;
 
-  /* Initialize the error code */
+  /* Reset the error code */
   hdma->ErrorCode = HAL_DMA_ERROR_NONE;
 
-  /* Initialize the DMA state */
+  /* Reset the DMA state */
   hdma->State = HAL_DMA_STATE_RESET;
 
   /* Release Lock */

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c

@@ -25,29 +25,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c

@@ -0,0 +1,440 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_exti.c
+  * @author  MCD Application Team
+  * @brief   EXTI HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Extended Interrupts and events controller (EXTI) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### EXTI Peripheral features #####
+  ==============================================================================
+  [..]
+    (+) Each Exti line can be configured within this driver.
+
+    (+) Exti line can be configured in 3 different modes
+        (++) Interrupt
+        (++) Event
+        (++) Both of them
+
+    (+) Configurable Exti lines can be configured with 3 different triggers
+        (++) Rising
+        (++) Falling
+        (++) Both of them
+
+    (+) When set in interrupt mode, configurable Exti lines have two different
+        interrupts pending registers which allow to distinguish which transition
+        occurs:
+        (++) Rising edge pending interrupt
+        (++) Falling
+
+    (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can
+        be selected through multiplexer.
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+
+    (#) Configure the EXTI line using HAL_EXTI_SetConfigLine().
+        (++) Choose the interrupt line number by setting "Line" member from
+             EXTI_ConfigTypeDef structure.
+        (++) Configure the interrupt and/or event mode using "Mode" member from
+             EXTI_ConfigTypeDef structure.
+        (++) For configurable lines, configure rising and/or falling trigger
+             "Trigger" member from EXTI_ConfigTypeDef structure.
+
+    (#) Get current Exti configuration of a dedicated line using
+        HAL_EXTI_GetConfigLine().
+        (++) Provide exiting handle as parameter.
+        (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter.
+
+    (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine().
+        (++) Provide exiting handle as parameter.
+
+    (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback().
+        (++) Provide exiting handle as first parameter.
+        (++) Provide which callback will be registered using one value from
+             EXTI_CallbackIDTypeDef.
+        (++) Provide callback function pointer.
+
+    (#) Get interrupt pending bit using HAL_EXTI_GetPending().
+
+    (#) Clear interrupt pending bit using HAL_EXTI_GetPending().
+
+    (#) Generate software interrupt using HAL_EXTI_GenerateSWI().
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup EXTI
+  * @{
+  */
+/** MISRA C:2012 deviation rule has been granted for following rule:
+  * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out
+  * of bounds [0,3] in following API :
+  * HAL_EXTI_SetConfigLine
+  * HAL_EXTI_GetConfigLine
+  * HAL_EXTI_ClearConfigLine
+  */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup EXTI_Private_Constants EXTI Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup EXTI_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup EXTI_Exported_Functions_Group1
+  *  @brief    Configuration functions
+  *
+@verbatim
+ ===============================================================================
+              ##### Configuration functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Set configuration of a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @param  pExtiConfig Pointer on EXTI configuration to be set.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
+{
+  uint32_t regval;
+
+  /* Check null pointer */
+  if ((hexti == NULL) || (pExtiConfig == NULL))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(pExtiConfig->Line));
+  assert_param(IS_EXTI_MODE(pExtiConfig->Mode));
+  assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger));
+
+  /* Assign line number to handle */
+  hexti->Line = pExtiConfig->Line;
+
+  /* Clear EXTI line configuration */
+  EXTI->IMR &= ~pExtiConfig->Line;
+  EXTI->EMR &= ~pExtiConfig->Line;
+
+  /* Select the Mode for the selected external interrupts */
+  regval = (uint32_t)EXTI_BASE;
+  regval += pExtiConfig->Mode;
+  *(__IO uint32_t *) regval |= pExtiConfig->Line;
+
+  /* Clear Rising Falling edge configuration */
+  EXTI->RTSR &= ~pExtiConfig->Line;
+  EXTI->FTSR &= ~pExtiConfig->Line;
+
+  /* Select the trigger for the selected external interrupts */
+  if (pExtiConfig->Trigger == EXTI_TRIGGER_RISING_FALLING)
+  {
+    /* Rising Falling edge */
+    EXTI->RTSR |= pExtiConfig->Line;
+    EXTI->FTSR |= pExtiConfig->Line;
+  }
+  else
+  {
+    regval = (uint32_t)EXTI_BASE;
+    regval += pExtiConfig->Trigger;
+    *(__IO uint32_t *) regval |= pExtiConfig->Line;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Get configuration of a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @param  pExtiConfig Pointer on structure to store Exti configuration.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
+{
+  /* Check null pointer */
+  if ((hexti == NULL) || (pExtiConfig == NULL))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameter */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+
+  /* Store handle line number to configuration structure */
+  pExtiConfig->Line = hexti->Line;
+
+  /* Get EXTI mode to configiguration structure */
+  if ((EXTI->IMR & hexti->Line) == hexti->Line)
+  {
+    pExtiConfig->Mode = EXTI_MODE_INTERRUPT;
+  }
+  else if ((EXTI->EMR & hexti->Line) == hexti->Line)
+  {
+    pExtiConfig->Mode = EXTI_MODE_EVENT;
+  }
+  else
+  {
+    /* No MODE selected */
+    pExtiConfig->Mode = 0x0Bu;
+  }
+
+  /* Get EXTI Trigger to configiguration structure */
+  if ((EXTI->RTSR & hexti->Line) == hexti->Line)
+  {
+    if ((EXTI->FTSR & hexti->Line) == hexti->Line)
+    {
+      pExtiConfig->Trigger = EXTI_TRIGGER_RISING_FALLING;
+    }
+    else
+    {
+      pExtiConfig->Trigger = EXTI_TRIGGER_RISING;
+    }
+  }
+  else if ((EXTI->FTSR & hexti->Line) == hexti->Line)
+  {
+    pExtiConfig->Trigger = EXTI_TRIGGER_FALLING;
+  }
+  else
+  {
+    /* No Trigger selected */
+    pExtiConfig->Trigger = 0x00u;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Clear whole configuration of a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti)
+{
+  /* Check null pointer */
+  if (hexti == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameter */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+
+  /* 1] Clear interrupt mode */
+  EXTI->IMR = (EXTI->IMR & ~hexti->Line);
+
+  /* 2] Clear event mode */
+  EXTI->EMR = (EXTI->EMR & ~hexti->Line);
+
+  /* 3] Clear triggers */
+  EXTI->RTSR = (EXTI->RTSR & ~hexti->Line);
+  EXTI->FTSR = (EXTI->FTSR & ~hexti->Line);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Register callback for a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @param  CallbackID User callback identifier.
+  *         This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values.
+  * @param  pPendingCbfn function pointer to be stored as callback.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void))
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  switch (CallbackID)
+  {
+    case  HAL_EXTI_COMMON_CB_ID:
+      hexti->RisingCallback = pPendingCbfn;
+      break;
+
+    default:
+      status = HAL_ERROR;
+      break;
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Store line number as handle private field.
+  * @param  hexti Exti handle.
+  * @param  ExtiLine Exti line number.
+  *         This parameter can be from 0 to @ref EXTI_LINE_NB.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine)
+{
+  /* Check the parameters */
+  assert_param(IS_EXTI_LINE(ExtiLine));
+
+  /* Check null pointer */
+  if (hexti == NULL)
+  {
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Store line number as handle private field */
+    hexti->Line = ExtiLine;
+
+    return HAL_OK;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup EXTI_Exported_Functions_Group2
+  *  @brief EXTI IO functions.
+  *
+@verbatim
+ ===============================================================================
+                       ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Handle EXTI interrupt request.
+  * @param  hexti Exti handle.
+  * @retval none.
+  */
+void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti)
+{
+  if (EXTI->PR != 0x00u)
+  {
+    /* Clear pending bit */
+    EXTI->PR = hexti->Line;
+
+    /* Call callback */
+    if (hexti->RisingCallback != NULL)
+    {
+      hexti->RisingCallback();
+    }
+  }
+}
+
+/**
+  * @brief  Get interrupt pending bit of a dedicated line.
+  * @param  hexti Exti handle.
+  * @param  Edge Specify which pending edge as to be checked.
+  *         This parameter can be one of the following values:
+  *           @arg @ref EXTI_TRIGGER_RISING_FALLING
+  *         This parameter is kept for compatibility with other series.
+  * @retval 1 if interrupt is pending else 0.
+  */
+uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
+{
+  __IO uint32_t *regaddr;
+  uint32_t regval;
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+  assert_param(IS_EXTI_PENDING_EDGE(Edge));
+
+  /* Get pending bit */
+  regaddr = &EXTI->PR;
+
+  /* return 1 if bit is set else 0 */
+  regval = ((*regaddr & hexti->Line) >> POSITION_VAL(hexti->Line));
+
+  return regval;
+}
+
+/**
+  * @brief  Clear interrupt pending bit of a dedicated line.
+  * @param  hexti Exti handle.
+  * @param  Edge Specify which pending edge as to be clear.
+  *         This parameter can be one of the following values:
+  *           @arg @ref EXTI_TRIGGER_RISING_FALLING
+  *         This parameter is kept for compatibility with other series.
+  * @retval None.
+  */
+void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
+{
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+  assert_param(IS_EXTI_PENDING_EDGE(Edge));
+
+  EXTI->PR =  hexti->Line;
+}
+
+/**
+  * @brief  Generate a software interrupt for a dedicated line.
+  * @param  hexti Exti handle.
+  * @retval None.
+  */
+void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti)
+{
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+
+  EXTI->SWIER = hexti->Line;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_EXTI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c

@@ -1,729 +1,772 @@
 /**
- ******************************************************************************
- * @file    stm32f4xx_hal_flash.c
- * @author  MCD Application Team
- * @brief   FLASH HAL module driver.
- *          This file provides firmware functions to manage the following 
- *          functionalities of the internal FLASH memory:
- *           + Program operations functions
- *           + Memory Control functions 
- *           + Peripheral Errors functions
- *         
- @verbatim
- ==============================================================================
- ##### FLASH peripheral features #####
- ==============================================================================
- 
- [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses 
- to the Flash memory. It implements the erase and program Flash memory operations 
- and the read and write protection mechanisms.
- 
- [..] The Flash memory interface accelerates code execution with a system of instruction
- prefetch and cache lines. 
-
- [..] The FLASH main features are:
- (+) Flash memory read operations
- (+) Flash memory program/erase operations
- (+) Read / write protections
- (+) Prefetch on I-Code
- (+) 64 cache lines of 128 bits on I-Code
- (+) 8 cache lines of 128 bits on D-Code
- 
- 
- ##### How to use this driver #####
- ==============================================================================
- [..]                             
- This driver provides functions and macros to configure and program the FLASH 
- memory of all STM32F4xx devices.
- 
- (#) FLASH Memory IO Programming functions: 
- (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and 
- HAL_FLASH_Lock() functions
- (++) Program functions: byte, half word, word and double word
- (++) There Two modes of programming :
- (+++) Polling mode using HAL_FLASH_Program() function
- (+++) Interrupt mode using HAL_FLASH_Program_IT() function
- 
- (#) Interrupts and flags management functions : 
- (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
- (++) Wait for last FLASH operation according to its status
- (++) Get error flag status by calling HAL_SetErrorCode()          
-
- [..] 
- In addition to these functions, this driver includes a set of macros allowing
- to handle the following operations:
- (+) Set the latency
- (+) Enable/Disable the prefetch buffer
- (+) Enable/Disable the Instruction cache and the Data cache
- (+) Reset the Instruction cache and the Data cache
- (+) Enable/Disable the FLASH interrupts
- (+) Monitor the FLASH flags status
- 
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash.c
+  * @author  MCD Application Team
+  * @brief   FLASH HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the internal FLASH memory:
+  *           + Program operations functions
+  *           + Memory Control functions 
+  *           + Peripheral Errors functions
+  *         
+  @verbatim
+  ==============================================================================
+                        ##### FLASH peripheral features #####
+  ==============================================================================
+           
+  [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses 
+       to the Flash memory. It implements the erase and program Flash memory operations 
+       and the read and write protection mechanisms.
+      
+  [..] The Flash memory interface accelerates code execution with a system of instruction
+       prefetch and cache lines. 
+
+  [..] The FLASH main features are:
+      (+) Flash memory read operations
+      (+) Flash memory program/erase operations
+      (+) Read / write protections
+      (+) Prefetch on I-Code
+      (+) 64 cache lines of 128 bits on I-Code
+      (+) 8 cache lines of 128 bits on D-Code
+      
+      
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]                             
+      This driver provides functions and macros to configure and program the FLASH 
+      memory of all STM32F4xx devices.
+    
+      (#) FLASH Memory IO Programming functions: 
+           (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and 
+                HAL_FLASH_Lock() functions
+           (++) Program functions: byte, half word, word and double word
+           (++) There Two modes of programming :
+            (+++) Polling mode using HAL_FLASH_Program() function
+            (+++) Interrupt mode using HAL_FLASH_Program_IT() function
+    
+      (#) Interrupts and flags management functions : 
+           (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
+           (++) Wait for last FLASH operation according to its status
+           (++) Get error flag status by calling HAL_SetErrorCode()          
+
+    [..] 
+      In addition to these functions, this driver includes a set of macros allowing
+      to handle the following operations:
+       (+) Set the latency
+       (+) Enable/Disable the prefetch buffer
+       (+) Enable/Disable the Instruction cache and the Data cache
+       (+) Reset the Instruction cache and the Data cache
+       (+) Enable/Disable the FLASH interrupts
+       (+) Monitor the FLASH flags status
+          
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
 
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f4xx_hal.h"
 
 /** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
+  * @{
+  */
 
 /** @defgroup FLASH FLASH
- * @brief FLASH HAL module driver
- * @{
- */
+  * @brief FLASH HAL module driver
+  * @{
+  */
 
 #ifdef HAL_FLASH_MODULE_ENABLED
 
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
 /** @addtogroup FLASH_Private_Constants
- * @{
- */
+  * @{
+  */
 #define FLASH_TIMEOUT_VALUE       50000U /* 50 s */
 /**
- * @}
- */
+  * @}
+  */         
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /** @addtogroup FLASH_Private_Variables
- * @{
- */
+  * @{
+  */
 /* Variable used for Erase sectors under interruption */
 FLASH_ProcessTypeDef pFlash;
 /**
- * @}
- */
+  * @}
+  */
 
 /* Private function prototypes -----------------------------------------------*/
 /** @addtogroup FLASH_Private_Functions
- * @{
- */
+  * @{
+  */
 /* Program operations */
-static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
-static void FLASH_Program_Word(uint32_t Address, uint32_t Data);
-static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
-static void FLASH_Program_Byte(uint32_t Address, uint8_t Data);
-static void FLASH_SetErrorCode(void);
+static void   FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
+static void   FLASH_Program_Word(uint32_t Address, uint32_t Data);
+static void   FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
+static void   FLASH_Program_Byte(uint32_t Address, uint8_t Data);
+static void   FLASH_SetErrorCode(void);
 
 HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
 /**
- * @}
- */
+  * @}
+  */
 
 /* Exported functions --------------------------------------------------------*/
 /** @defgroup FLASH_Exported_Functions FLASH Exported Functions
- * @{
- */
-
+  * @{
+  */
+  
 /** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions 
  *  @brief   Programming operation functions 
  *
- @verbatim   
+@verbatim   
  ===============================================================================
- ##### Programming operation functions #####
+                  ##### Programming operation functions #####
  ===============================================================================  
- [..]
- This subsection provides a set of functions allowing to manage the FLASH 
- program operations.
+    [..]
+    This subsection provides a set of functions allowing to manage the FLASH 
+    program operations.
 
- @endverbatim
- * @{
- */
+@endverbatim
+  * @{
+  */
 
 /**
- * @brief  Program byte, halfword, word or double word at a specified address
- * @param  TypeProgram  Indicate the way to program at a specified address.
- *                           This parameter can be a value of @ref FLASH_Type_Program
- * @param  Address  specifies the address to be programmed.
- * @param  Data specifies the data to be programmed
- * 
- * @retval HAL_StatusTypeDef HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address,
-		uint64_t Data) {
-	HAL_StatusTypeDef status = HAL_ERROR;
-
-	/* Process Locked */
-	__HAL_LOCK(&pFlash);
-
-	/* Check the parameters */
-	assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
-
-	/* Wait for last operation to be completed */
-	status = FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE);
-
-	if (status == HAL_OK) {
-		if (TypeProgram == FLASH_TYPEPROGRAM_BYTE) {
-			/*Program byte (8-bit) at a specified address.*/
-			FLASH_Program_Byte(Address, (uint8_t) Data);
-		} else if (TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) {
-			/*Program halfword (16-bit) at a specified address.*/
-			FLASH_Program_HalfWord(Address, (uint16_t) Data);
-		} else if (TypeProgram == FLASH_TYPEPROGRAM_WORD) {
-			/*Program word (32-bit) at a specified address.*/
-			FLASH_Program_Word(Address, (uint32_t) Data);
-		} else {
-			/*Program double word (64-bit) at a specified address.*/
-			FLASH_Program_DoubleWord(Address, Data);
-		}
-
-		/* Wait for last operation to be completed */
-		status = FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE);
-
-		/* If the program operation is completed, disable the PG Bit */
-		FLASH->CR &= (~FLASH_CR_PG);
-	}
-
-	/* Process Unlocked */
-	__HAL_UNLOCK(&pFlash);
-
-	return status;
+  * @brief  Program byte, halfword, word or double word at a specified address
+  * @param  TypeProgram  Indicate the way to program at a specified address.
+  *                           This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address  specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed
+  * 
+  * @retval HAL_StatusTypeDef HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+  
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+  
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+  
+  if(status == HAL_OK)
+  {
+    if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
+    {
+      /*Program byte (8-bit) at a specified address.*/
+      FLASH_Program_Byte(Address, (uint8_t) Data);
+    }
+    else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+    {
+      /*Program halfword (16-bit) at a specified address.*/
+      FLASH_Program_HalfWord(Address, (uint16_t) Data);
+    }
+    else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+    {
+      /*Program word (32-bit) at a specified address.*/
+      FLASH_Program_Word(Address, (uint32_t) Data);
+    }
+    else
+    {
+      /*Program double word (64-bit) at a specified address.*/
+      FLASH_Program_DoubleWord(Address, Data);
+    }
+    
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+    
+    /* If the program operation is completed, disable the PG Bit */
+    FLASH->CR &= (~FLASH_CR_PG);  
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+  
+  return status;
 }
 
 /**
- * @brief   Program byte, halfword, word or double word at a specified address  with interrupt enabled.
- * @param  TypeProgram  Indicate the way to program at a specified address.
- *                           This parameter can be a value of @ref FLASH_Type_Program
- * @param  Address  specifies the address to be programmed.
- * @param  Data specifies the data to be programmed
- * 
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address,
-		uint64_t Data) {
-	HAL_StatusTypeDef status = HAL_OK;
-
-	/* Process Locked */
-	__HAL_LOCK(&pFlash);
-
-	/* Check the parameters */
-	assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
-
-	/* Enable End of FLASH Operation interrupt */
-	__HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
-
-	/* Enable Error source interrupt */
-	__HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
-
-	pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
-	pFlash.Address = Address;
-
-	if (TypeProgram == FLASH_TYPEPROGRAM_BYTE) {
-		/*Program byte (8-bit) at a specified address.*/
-		FLASH_Program_Byte(Address, (uint8_t) Data);
-	} else if (TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) {
-		/*Program halfword (16-bit) at a specified address.*/
-		FLASH_Program_HalfWord(Address, (uint16_t) Data);
-	} else if (TypeProgram == FLASH_TYPEPROGRAM_WORD) {
-		/*Program word (32-bit) at a specified address.*/
-		FLASH_Program_Word(Address, (uint32_t) Data);
-	} else {
-		/*Program double word (64-bit) at a specified address.*/
-		FLASH_Program_DoubleWord(Address, Data);
-	}
-
-	return status;
+  * @brief   Program byte, halfword, word or double word at a specified address  with interrupt enabled.
+  * @param  TypeProgram  Indicate the way to program at a specified address.
+  *                           This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address  specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed
+  * 
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+  /* Enable End of FLASH Operation interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
+  
+  /* Enable Error source interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
+
+  pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
+  pFlash.Address = Address;
+
+  if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
+  {
+    /*Program byte (8-bit) at a specified address.*/
+      FLASH_Program_Byte(Address, (uint8_t) Data);
+  }
+  else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+  {
+    /*Program halfword (16-bit) at a specified address.*/
+    FLASH_Program_HalfWord(Address, (uint16_t) Data);
+  }
+  else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+  {
+    /*Program word (32-bit) at a specified address.*/
+    FLASH_Program_Word(Address, (uint32_t) Data);
+  }
+  else
+  {
+    /*Program double word (64-bit) at a specified address.*/
+    FLASH_Program_DoubleWord(Address, Data);
+  }
+
+  return status;
 }
 
 /**
- * @brief This function handles FLASH interrupt request.
- * @retval None
- */
-void HAL_FLASH_IRQHandler(void) {
-	uint32_t addresstmp = 0U;
-
-	/* Check FLASH operation error flags */
+  * @brief This function handles FLASH interrupt request.
+  * @retval None
+  */
+void HAL_FLASH_IRQHandler(void)
+{
+  uint32_t addresstmp = 0U;
+  
+  /* Check FLASH operation error flags */
 #if defined(FLASH_SR_RDERR) 
-	if (__HAL_FLASH_GET_FLAG(
-			(FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR))
-			!= RESET)
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+    FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
 #else
-			if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR |
-									FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET)
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+    FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET)
 #endif /* FLASH_SR_RDERR */
-			{
-		if (pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE) {
-			/*return the faulty sector*/
-			addresstmp = pFlash.Sector;
-			pFlash.Sector = 0xFFFFFFFFU;
-		} else if (pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) {
-			/*return the faulty bank*/
-			addresstmp = pFlash.Bank;
-		} else {
-			/*return the faulty address*/
-			addresstmp = pFlash.Address;
-		}
-
-		/*Save the Error code*/
-		FLASH_SetErrorCode();
-
-		/* FLASH error interrupt user callback */
-		HAL_FLASH_OperationErrorCallback(addresstmp);
-
-		/*Stop the procedure ongoing*/
-		pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
-	}
-
-	/* Check FLASH End of Operation flag  */
-	if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) {
-		/* Clear FLASH End of Operation pending bit */
-		__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
-
-		if (pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE) {
-			/*Nb of sector to erased can be decreased*/
-			pFlash.NbSectorsToErase--;
-
-			/* Check if there are still sectors to erase*/
-			if (pFlash.NbSectorsToErase != 0U) {
-				addresstmp = pFlash.Sector;
-				/*Indicate user which sector has been erased*/
-				HAL_FLASH_EndOfOperationCallback(addresstmp);
-
-				/*Increment sector number*/
-				pFlash.Sector++;
-				addresstmp = pFlash.Sector;
-				FLASH_Erase_Sector(addresstmp, pFlash.VoltageForErase);
-			} else {
-				/*No more sectors to Erase, user callback can be called.*/
-				/*Reset Sector and stop Erase sectors procedure*/
-				pFlash.Sector = addresstmp = 0xFFFFFFFFU;
-				pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
-
-				/* Flush the caches to be sure of the data consistency */
-				FLASH_FlushCaches();
-
-				/* FLASH EOP interrupt user callback */
-				HAL_FLASH_EndOfOperationCallback(addresstmp);
-			}
-		} else {
-			if (pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) {
-				/* MassErase ended. Return the selected bank */
-				/* Flush the caches to be sure of the data consistency */
-				FLASH_FlushCaches();
-
-				/* FLASH EOP interrupt user callback */
-				HAL_FLASH_EndOfOperationCallback(pFlash.Bank);
-			} else {
-				/*Program ended. Return the selected address*/
-				/* FLASH EOP interrupt user callback */
-				HAL_FLASH_EndOfOperationCallback(pFlash.Address);
-			}
-			pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
-		}
-	}
-
-	if (pFlash.ProcedureOnGoing == FLASH_PROC_NONE) {
-		/* Operation is completed, disable the PG, SER, SNB and MER Bits */
-		CLEAR_BIT(FLASH->CR,
-				(FLASH_CR_PG | FLASH_CR_SER | FLASH_CR_SNB | FLASH_MER_BIT));
-
-		/* Disable End of FLASH Operation interrupt */
-		__HAL_FLASH_DISABLE_IT(FLASH_IT_EOP);
-
-		/* Disable Error source interrupt */
-		__HAL_FLASH_DISABLE_IT(FLASH_IT_ERR);
-
-		/* Process Unlocked */
-		__HAL_UNLOCK(&pFlash);
-	}
+  {
+    if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
+    {
+      /*return the faulty sector*/
+      addresstmp = pFlash.Sector;
+      pFlash.Sector = 0xFFFFFFFFU;
+    }
+    else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
+    {
+      /*return the faulty bank*/
+      addresstmp = pFlash.Bank;
+    }
+    else
+    {
+      /*return the faulty address*/
+      addresstmp = pFlash.Address;
+    }
+    
+    /*Save the Error code*/
+    FLASH_SetErrorCode();
+    
+    /* FLASH error interrupt user callback */
+    HAL_FLASH_OperationErrorCallback(addresstmp);
+    
+    /*Stop the procedure ongoing*/
+    pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+  }
+  
+  /* Check FLASH End of Operation flag  */
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
+  {
+    /* Clear FLASH End of Operation pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+    
+    if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
+    {
+      /*Nb of sector to erased can be decreased*/
+      pFlash.NbSectorsToErase--;
+      
+      /* Check if there are still sectors to erase*/
+      if(pFlash.NbSectorsToErase != 0U)
+      {
+        addresstmp = pFlash.Sector;
+        /*Indicate user which sector has been erased*/
+        HAL_FLASH_EndOfOperationCallback(addresstmp);
+        
+        /*Increment sector number*/
+        pFlash.Sector++;
+        addresstmp = pFlash.Sector;
+        FLASH_Erase_Sector(addresstmp, pFlash.VoltageForErase);
+      }
+      else
+      {
+        /*No more sectors to Erase, user callback can be called.*/
+        /*Reset Sector and stop Erase sectors procedure*/
+        pFlash.Sector = addresstmp = 0xFFFFFFFFU;
+        pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+        
+        /* Flush the caches to be sure of the data consistency */
+        FLASH_FlushCaches() ;
+                
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(addresstmp);
+      }
+    }
+    else 
+    {
+      if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) 
+      {
+        /* MassErase ended. Return the selected bank */
+        /* Flush the caches to be sure of the data consistency */
+        FLASH_FlushCaches() ;
+
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(pFlash.Bank);
+      }
+      else
+      {
+        /*Program ended. Return the selected address*/
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+      }
+      pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+    }
+  }
+  
+  if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
+  {
+    /* Operation is completed, disable the PG, SER, SNB and MER Bits */
+    CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_SER | FLASH_CR_SNB | FLASH_MER_BIT));
+
+    /* Disable End of FLASH Operation interrupt */
+    __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP);
+    
+    /* Disable Error source interrupt */
+    __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(&pFlash);
+  }
 }
 
 /**
- * @brief  FLASH end of operation interrupt callback
- * @param  ReturnValue The value saved in this parameter depends on the ongoing procedure
- *                  Mass Erase: Bank number which has been requested to erase
- *                  Sectors Erase: Sector which has been erased 
- *                    (if 0xFFFFFFFFU, it means that all the selected sectors have been erased)
- *                  Program: Address which was selected for data program
- * @retval None
- */
-__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) {
-	/* Prevent unused argument(s) compilation warning */
-	UNUSED(ReturnValue);
-	/* NOTE : This function Should not be modified, when the callback is needed,
-	 the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
-	 */
+  * @brief  FLASH end of operation interrupt callback
+  * @param  ReturnValue The value saved in this parameter depends on the ongoing procedure
+  *                  Mass Erase: Bank number which has been requested to erase
+  *                  Sectors Erase: Sector which has been erased 
+  *                    (if 0xFFFFFFFFU, it means that all the selected sectors have been erased)
+  *                  Program: Address which was selected for data program
+  * @retval None
+  */
+__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(ReturnValue);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
+   */ 
 }
 
 /**
- * @brief  FLASH operation error interrupt callback
- * @param  ReturnValue The value saved in this parameter depends on the ongoing procedure
- *                 Mass Erase: Bank number which has been requested to erase
- *                 Sectors Erase: Sector number which returned an error
- *                 Program: Address which was selected for data program
- * @retval None
- */
-__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) {
-	/* Prevent unused argument(s) compilation warning */
-	UNUSED(ReturnValue);
-	/* NOTE : This function Should not be modified, when the callback is needed,
-	 the HAL_FLASH_OperationErrorCallback could be implemented in the user file
-	 */
+  * @brief  FLASH operation error interrupt callback
+  * @param  ReturnValue The value saved in this parameter depends on the ongoing procedure
+  *                 Mass Erase: Bank number which has been requested to erase
+  *                 Sectors Erase: Sector number which returned an error
+  *                 Program: Address which was selected for data program
+  * @retval None
+  */
+__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(ReturnValue);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FLASH_OperationErrorCallback could be implemented in the user file
+   */ 
 }
 
 /**
- * @}
- */
+  * @}
+  */
 
 /** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions 
  *  @brief   management functions 
  *
- @verbatim   
+@verbatim   
  ===============================================================================
- ##### Peripheral Control functions #####
+                      ##### Peripheral Control functions #####
  ===============================================================================  
- [..]
- This subsection provides a set of functions allowing to control the FLASH 
- memory operations.
+    [..]
+    This subsection provides a set of functions allowing to control the FLASH 
+    memory operations.
 
- @endverbatim
- * @{
- */
+@endverbatim
+  * @{
+  */
 
 /**
- * @brief  Unlock the FLASH control register access
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_Unlock(void) {
-	HAL_StatusTypeDef status = HAL_OK;
-
-	if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) {
-		/* Authorize the FLASH Registers access */
-		WRITE_REG(FLASH->KEYR, FLASH_KEY1);
-		WRITE_REG(FLASH->KEYR, FLASH_KEY2);
-
-		/* Verify Flash is unlocked */
-		if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) {
-			status = HAL_ERROR;
-		}
-	}
-
-	return status;
+  * @brief  Unlock the FLASH control register access
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
+  {
+    /* Authorize the FLASH Registers access */
+    WRITE_REG(FLASH->KEYR, FLASH_KEY1);
+    WRITE_REG(FLASH->KEYR, FLASH_KEY2);
+
+    /* Verify Flash is unlocked */
+    if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
+    {
+      status = HAL_ERROR;
+    }
+  }
+
+  return status;
 }
 
 /**
- * @brief  Locks the FLASH control register access
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_Lock(void) {
-	/* Set the LOCK Bit to lock the FLASH Registers access */
-	FLASH->CR |= FLASH_CR_LOCK;
-
-	return HAL_OK;
+  * @brief  Locks the FLASH control register access
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Lock(void)
+{
+  /* Set the LOCK Bit to lock the FLASH Registers access */
+  FLASH->CR |= FLASH_CR_LOCK;
+  
+  return HAL_OK;  
 }
 
 /**
- * @brief  Unlock the FLASH Option Control Registers access.
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) {
-	if ((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET) {
-		/* Authorizes the Option Byte register programming */
-		FLASH->OPTKEYR = FLASH_OPT_KEY1;
-		FLASH->OPTKEYR = FLASH_OPT_KEY2;
-	} else {
-		return HAL_ERROR;
-	}
-
-	return HAL_OK;
+  * @brief  Unlock the FLASH Option Control Registers access.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
+{
+  if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET)
+  {
+    /* Authorizes the Option Byte register programming */
+    FLASH->OPTKEYR = FLASH_OPT_KEY1;
+    FLASH->OPTKEYR = FLASH_OPT_KEY2;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }  
+  
+  return HAL_OK;  
 }
 
 /**
- * @brief  Lock the FLASH Option Control Registers access.
- * @retval HAL Status 
- */
-HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) {
-	/* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
-	FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
-
-	return HAL_OK;
+  * @brief  Lock the FLASH Option Control Registers access.
+  * @retval HAL Status 
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
+{
+  /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
+  FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
+  
+  return HAL_OK;  
 }
 
 /**
- * @brief  Launch the option byte loading.
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) {
-	/* Set the OPTSTRT bit in OPTCR register */
-	*(__IO uint8_t *) OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT;
-
-	/* Wait for last operation to be completed */
-	return (FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE));
+  * @brief  Launch the option byte loading.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
+{
+  /* Set the OPTSTRT bit in OPTCR register */
+  *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT;
+
+  /* Wait for last operation to be completed */
+  return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE)); 
 }
 
 /**
- * @}
- */
+  * @}
+  */
 
 /** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions 
  *  @brief   Peripheral Errors functions 
  *
- @verbatim   
+@verbatim   
  ===============================================================================
- ##### Peripheral Errors functions #####
+                ##### Peripheral Errors functions #####
  ===============================================================================  
- [..]
- This subsection permits to get in run-time Errors of the FLASH peripheral.
+    [..]
+    This subsection permits to get in run-time Errors of the FLASH peripheral.
 
- @endverbatim
- * @{
- */
+@endverbatim
+  * @{
+  */
 
 /**
- * @brief  Get the specific FLASH error flag.
- * @retval FLASH_ErrorCode: The returned value can be a combination of:
- *            @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP)
- *            @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag 
- *            @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag  
- *            @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag
- *            @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag
- *            @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag 
- */
-uint32_t HAL_FLASH_GetError(void) {
-	return pFlash.ErrorCode;
-}
-
+  * @brief  Get the specific FLASH error flag.
+  * @retval FLASH_ErrorCode: The returned value can be a combination of:
+  *            @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP)
+  *            @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag 
+  *            @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag  
+  *            @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag
+  *            @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag
+  *            @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag 
+  */
+uint32_t HAL_FLASH_GetError(void)
+{ 
+   return pFlash.ErrorCode;
+}  
+  
 /**
- * @}
- */
+  * @}
+  */    
 
 /**
- * @brief  Wait for a FLASH operation to complete.
- * @param  Timeout maximum flash operationtimeout
- * @retval HAL Status
- */
-HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) {
-	uint32_t tickstart = 0U;
-
-	/* Clear Error Code */
-	pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
-
-	/* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
-	 Even if the FLASH operation fails, the BUSY flag will be reset and an error
-	 flag will be set */
-	/* Get tick */
-	tickstart = HAL_GetTick();
-
-	while (__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET) {
-		if (Timeout != HAL_MAX_DELAY) {
-			if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) {
-				return HAL_TIMEOUT;
-			}
-		}
-	}
-
-	/* Check FLASH End of Operation flag  */
-	if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) {
-		/* Clear FLASH End of Operation pending bit */
-		__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
-	}
+  * @brief  Wait for a FLASH operation to complete.
+  * @param  Timeout maximum flash operationtimeout
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
+{ 
+  uint32_t tickstart = 0U;
+  
+  /* Clear Error Code */
+  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+  
+  /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+     Even if the FLASH operation fails, the BUSY flag will be reset and an error
+     flag will be set */
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET) 
+  { 
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        return HAL_TIMEOUT;
+      }
+    } 
+  }
+
+  /* Check FLASH End of Operation flag  */
+  if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
+  {
+    /* Clear FLASH End of Operation pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+  }
 #if defined(FLASH_SR_RDERR)  
-	if (__HAL_FLASH_GET_FLAG(
-			(FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR))
-			!= RESET)
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
 #else
-			if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR |
-									FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET)
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET)
 #endif /* FLASH_SR_RDERR */
-			{
-		/*Save the error code*/
-		FLASH_SetErrorCode();
-		return HAL_ERROR;
-	}
-
-	/* If there is no error flag set */
-	return HAL_OK;
+  {
+    /*Save the error code*/
+    FLASH_SetErrorCode();
+    return HAL_ERROR;
+  }
 
-}
+  /* If there is no error flag set */
+  return HAL_OK;
+  
+}  
 
 /**
- * @brief  Program a double word (64-bit) at a specified address.
- * @note   This function must be used when the device voltage range is from
- *         2.7V to 3.6V and Vpp in the range 7V to 9V.
- *
- * @note   If an erase and a program operations are requested simultaneously,    
- *         the erase operation is performed before the program one.
- *  
- * @param  Address specifies the address to be programmed.
- * @param  Data specifies the data to be programmed.
- * @retval None
- */
-static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) {
-	/* Check the parameters */
-	assert_param(IS_FLASH_ADDRESS(Address));
-
-	/* If the previous operation is completed, proceed to program the new data */
-	CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
-	FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD;
-	FLASH->CR |= FLASH_CR_PG;
-
-	/* Program the double-word */
-	*(__IO uint32_t*) Address = (uint32_t) Data;
-	*(__IO uint32_t*) (Address + 4) = (uint32_t) (Data >> 32);
+  * @brief  Program a double word (64-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V and Vpp in the range 7V to 9V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+  FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  /* Program the double-word */
+  *(__IO uint32_t*)Address = (uint32_t)Data;
+  *(__IO uint32_t*)(Address+4) = (uint32_t)(Data >> 32);
 }
 
+
 /**
- * @brief  Program word (32-bit) at a specified address.
- * @note   This function must be used when the device voltage range is from
- *         2.7V to 3.6V.
- *
- * @note   If an erase and a program operations are requested simultaneously,    
- *         the erase operation is performed before the program one.
- *  
- * @param  Address specifies the address to be programmed.
- * @param  Data specifies the data to be programmed.
- * @retval None
- */
-static void FLASH_Program_Word(uint32_t Address, uint32_t Data) {
-	/* Check the parameters */
-	assert_param(IS_FLASH_ADDRESS(Address));
-
-	/* If the previous operation is completed, proceed to program the new data */
-	CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
-	FLASH->CR |= FLASH_PSIZE_WORD;
-	FLASH->CR |= FLASH_CR_PG;
-
-	*(__IO uint32_t*) Address = Data;
+  * @brief  Program word (32-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_Word(uint32_t Address, uint32_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+  FLASH->CR |= FLASH_PSIZE_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint32_t*)Address = Data;
 }
 
 /**
- * @brief  Program a half-word (16-bit) at a specified address.
- * @note   This function must be used when the device voltage range is from
- *         2.1V to 3.6V.
- *
- * @note   If an erase and a program operations are requested simultaneously,    
- *         the erase operation is performed before the program one.
- *  
- * @param  Address specifies the address to be programmed.
- * @param  Data specifies the data to be programmed.
- * @retval None
- */
-static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data) {
-	/* Check the parameters */
-	assert_param(IS_FLASH_ADDRESS(Address));
-
-	/* If the previous operation is completed, proceed to program the new data */
-	CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
-	FLASH->CR |= FLASH_PSIZE_HALF_WORD;
-	FLASH->CR |= FLASH_CR_PG;
-
-	*(__IO uint16_t*) Address = Data;
+  * @brief  Program a half-word (16-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.1V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+  FLASH->CR |= FLASH_PSIZE_HALF_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint16_t*)Address = Data;
 }
 
 /**
- * @brief  Program byte (8-bit) at a specified address.
- * @note   This function must be used when the device voltage range is from
- *         1.8V to 3.6V.
- *
- * @note   If an erase and a program operations are requested simultaneously,    
- *         the erase operation is performed before the program one.
- *  
- * @param  Address specifies the address to be programmed.
- * @param  Data specifies the data to be programmed.
- * @retval None
- */
-static void FLASH_Program_Byte(uint32_t Address, uint8_t Data) {
-	/* Check the parameters */
-	assert_param(IS_FLASH_ADDRESS(Address));
-
-	/* If the previous operation is completed, proceed to program the new data */
-	CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
-	FLASH->CR |= FLASH_PSIZE_BYTE;
-	FLASH->CR |= FLASH_CR_PG;
-
-	*(__IO uint8_t*) Address = Data;
+  * @brief  Program byte (8-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         1.8V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_Byte(uint32_t Address, uint8_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+  FLASH->CR |= FLASH_PSIZE_BYTE;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint8_t*)Address = Data;
 }
 
 /**
- * @brief  Set the specific FLASH error flag.
- * @retval None
- */
-static void FLASH_SetErrorCode(void) {
-	if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET) {
-		pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
-
-		/* Clear FLASH write protection error pending bit */
-		__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR);
-	}
-
-	if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET) {
-		pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
-
-		/* Clear FLASH Programming alignment error pending bit */
-		__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGAERR);
-	}
-
-	if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET) {
-		pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP;
-
-		/* Clear FLASH Programming parallelism error pending bit */
-		__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGPERR);
-	}
-
-	if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET) {
-		pFlash.ErrorCode |= HAL_FLASH_ERROR_PGS;
-
-		/* Clear FLASH Programming sequence error pending bit */
-		__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGSERR);
-	}
+  * @brief  Set the specific FLASH error flag.
+  * @retval None
+  */
+static void FLASH_SetErrorCode(void)
+{ 
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET)
+  {
+   pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
+   
+   /* Clear FLASH write protection error pending bit */
+   __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR);
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET)
+  {
+   pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
+   
+   /* Clear FLASH Programming alignment error pending bit */
+   __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGAERR);
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP;
+    
+    /* Clear FLASH Programming parallelism error pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGPERR);
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_PGS;
+    
+    /* Clear FLASH Programming sequence error pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGSERR);
+  }
 #if defined(FLASH_SR_RDERR) 
-	if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET) {
-		pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
-
-		/* Clear FLASH Proprietary readout protection error pending bit */
-		__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_RDERR);
-	}
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
+    
+    /* Clear FLASH Proprietary readout protection error pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_RDERR);
+  }
 #endif /* FLASH_SR_RDERR */  
-	if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET) {
-		pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION;
-
-		/* Clear FLASH Operation error pending bit */
-		__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR);
-	}
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION;
+    
+    /* Clear FLASH Operation error pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR);
+  }
 }
 
 /**
- * @}
- */
+  * @}
+  */
 
 #endif /* HAL_FLASH_MODULE_ENABLED */
 
 /**
- * @}
- */
+  * @}
+  */
 
 /**
- * @}
- */
+  * @}
+  */
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c

@@ -1,77 +1,61 @@
 /**
- ******************************************************************************
- * @file    stm32f4xx_hal_flash_ramfunc.c
- * @author  MCD Application Team
- * @brief   FLASH RAMFUNC module driver.
- *          This file provides a FLASH firmware functions which should be 
- *          executed from internal SRAM
- *            + Stop/Start the flash interface while System Run
- *            + Enable/Disable the flash sleep while System Run
- @verbatim
- ==============================================================================
- ##### APIs executed from Internal RAM #####
- ==============================================================================
- [..]
- *** ARM Compiler ***
- --------------------
- [..] RAM functions are defined using the toolchain options. 
- Functions that are be executed in RAM should reside in a separate
- source module. Using the 'Options for File' dialog you can simply change
- the 'Code / Const' area of a module to a memory space in physical RAM.
- Available memory areas are declared in the 'Target' tab of the 
- Options for Target' dialog.
-
- *** ICCARM Compiler ***
- -----------------------
- [..] RAM functions are defined using a specific toolchain keyword "__ramfunc".
-
- *** GNU Compiler ***
- --------------------
- [..] RAM functions are defined using a specific toolchain attribute
- "__attribute__((section(".RamFunc")))".
- 
- @endverbatim         
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash_ramfunc.c
+  * @author  MCD Application Team
+  * @brief   FLASH RAMFUNC module driver.
+  *          This file provides a FLASH firmware functions which should be 
+  *          executed from internal SRAM
+  *            + Stop/Start the flash interface while System Run
+  *            + Enable/Disable the flash sleep while System Run
+  @verbatim
+  ==============================================================================
+                    ##### APIs executed from Internal RAM #####
+  ==============================================================================
+  [..]
+    *** ARM Compiler ***
+    --------------------
+    [..] RAM functions are defined using the toolchain options. 
+         Functions that are be executed in RAM should reside in a separate
+         source module. Using the 'Options for File' dialog you can simply change
+         the 'Code / Const' area of a module to a memory space in physical RAM.
+         Available memory areas are declared in the 'Target' tab of the 
+         Options for Target' dialog.
+
+    *** ICCARM Compiler ***
+    -----------------------
+    [..] RAM functions are defined using a specific toolchain keyword "__ramfunc".
+
+    *** GNU Compiler ***
+    --------------------
+    [..] RAM functions are defined using a specific toolchain attribute
+         "__attribute__((section(".RamFunc")))".
+  
+  @endverbatim         
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
 
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f4xx_hal.h"
 
 /** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
+  * @{
+  */
 
 /** @defgroup FLASH_RAMFUNC FLASH RAMFUNC
- * @brief FLASH functions executed from RAM
- * @{
- */
+  * @brief FLASH functions executed from RAM
+  * @{
+  */
 #ifdef HAL_FLASH_MODULE_ENABLED
 #if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
     defined(STM32F412Rx) || defined(STM32F412Cx)
@@ -83,109 +67,109 @@
 /* Private function prototypes -----------------------------------------------*/
 /* Exported functions --------------------------------------------------------*/
 /** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH RAMFUNC Exported Functions
- * @{
- */
+  * @{
+  */
 
 /** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions executed from internal RAM 
- *  @brief Peripheral Extended features functions 
- *
- @verbatim   
+  *  @brief Peripheral Extended features functions 
+  *
+@verbatim   
 
  ===============================================================================
- ##### ramfunc functions #####
+                      ##### ramfunc functions #####
  ===============================================================================  
- [..]
- This subsection provides a set of functions that should be executed from RAM 
- transfers.
- 
- @endverbatim
- * @{
- */
+    [..]
+    This subsection provides a set of functions that should be executed from RAM 
+    transfers.
+    
+@endverbatim
+  * @{
+  */
 
 /**
- * @brief Stop the flash interface while System Run
- * @note  This mode is only available for STM32F41xxx/STM32F446xx devices. 
- * @note  This mode couldn't be set while executing with the flash itself. 
- *        It should be done with specific routine executed from RAM.     
- * @retval HAL status
- */
+  * @brief Stop the flash interface while System Run
+  * @note  This mode is only available for STM32F41xxx/STM32F446xx devices. 
+  * @note  This mode couldn't be set while executing with the flash itself. 
+  *        It should be done with specific routine executed from RAM.     
+  * @retval HAL status
+  */
 __RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void)
 {
-	/* Enable Power ctrl clock */
-	__HAL_RCC_PWR_CLK_ENABLE();
-	/* Stop the flash interface while System Run */
-	SET_BIT(PWR->CR, PWR_CR_FISSR);
-
-	return HAL_OK;
+  /* Enable Power ctrl clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  /* Stop the flash interface while System Run */  
+  SET_BIT(PWR->CR, PWR_CR_FISSR);
+   
+  return HAL_OK;
 }
 
 /**
- * @brief Start the flash interface while System Run
- * @note  This mode is only available for STM32F411xx/STM32F446xx devices. 
- * @note  This mode couldn't be set while executing with the flash itself. 
- *        It should be done with specific routine executed from RAM.     
- * @retval HAL status
- */
+  * @brief Start the flash interface while System Run
+  * @note  This mode is only available for STM32F411xx/STM32F446xx devices. 
+  * @note  This mode couldn't be set while executing with the flash itself. 
+  *        It should be done with specific routine executed from RAM.     
+  * @retval HAL status
+  */
 __RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void)
 {
-	/* Enable Power ctrl clock */
-	__HAL_RCC_PWR_CLK_ENABLE();
-	/* Start the flash interface while System Run */
-	CLEAR_BIT(PWR->CR, PWR_CR_FISSR);
+  /* Enable Power ctrl clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  /* Start the flash interface while System Run */
+  CLEAR_BIT(PWR->CR, PWR_CR_FISSR);
 
-	return HAL_OK;
+  return HAL_OK;
 }
 
 /**
- * @brief Enable the flash sleep while System Run
- * @note  This mode is only available for STM32F41xxx/STM32F446xx devices. 
- * @note  This mode could n't be set while executing with the flash itself. 
- *        It should be done with specific routine executed from RAM.     
- * @retval HAL status
- */
+  * @brief Enable the flash sleep while System Run
+  * @note  This mode is only available for STM32F41xxx/STM32F446xx devices. 
+  * @note  This mode could n't be set while executing with the flash itself. 
+  *        It should be done with specific routine executed from RAM.     
+  * @retval HAL status
+  */
 __RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void)
 {
-	/* Enable Power ctrl clock */
-	__HAL_RCC_PWR_CLK_ENABLE();
-	/* Enable the flash sleep while System Run */
-	SET_BIT(PWR->CR, PWR_CR_FMSSR);
+  /* Enable Power ctrl clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  /* Enable the flash sleep while System Run */
+  SET_BIT(PWR->CR, PWR_CR_FMSSR);
 
-	return HAL_OK;
+  return HAL_OK;
 }
 
 /**
- * @brief Disable the flash sleep while System Run
- * @note  This mode is only available for STM32F41xxx/STM32F446xx devices. 
- * @note  This mode couldn't be set while executing with the flash itself. 
- *        It should be done with specific routine executed from RAM.     
- * @retval HAL status
- */
+  * @brief Disable the flash sleep while System Run
+  * @note  This mode is only available for STM32F41xxx/STM32F446xx devices. 
+  * @note  This mode couldn't be set while executing with the flash itself. 
+  *        It should be done with specific routine executed from RAM.     
+  * @retval HAL status
+  */
 __RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void)
 {
-	/* Enable Power ctrl clock */
-	__HAL_RCC_PWR_CLK_ENABLE();
-	/* Disable the flash sleep while System Run */
-	CLEAR_BIT(PWR->CR, PWR_CR_FMSSR);
-
-	return HAL_OK;
+  /* Enable Power ctrl clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  /* Disable the flash sleep while System Run */
+  CLEAR_BIT(PWR->CR, PWR_CR_FMSSR);
+  
+  return HAL_OK;
 }
 
 /**
- * @}
- */
+  * @}
+  */
 
 /**
- * @}
- */
+  * @}
+  */
 
 #endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
 #endif /* HAL_FLASH_MODULE_ENABLED */
 /**
- * @}
- */
+  * @}
+  */
 
 /**
- * @}
- */
+  * @}
+  */
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c

@@ -93,29 +93,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -329,22 +313,6 @@ void HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin)
 
     if(iocurrent == ioposition)
     {
-      /*------------------------- GPIO Mode Configuration --------------------*/
-      /* Configure IO Direction in Input Floating Mode */
-      GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2U));
-
-      /* Configure the default Alternate Function in current IO */
-      GPIOx->AFR[position >> 3U] &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ;
-
-      /* Configure the default value for IO Speed */
-      GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
-
-      /* Configure the default value IO Output Type */
-      GPIOx->OTYPER  &= ~(GPIO_OTYPER_OT_0 << position) ;
-
-      /* Deactivate the Pull-up and Pull-down resistor for the current IO */
-      GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
-
       /*------------------------- EXTI Mode Configuration --------------------*/
       tmp = SYSCFG->EXTICR[position >> 2U];
       tmp &= (0x0FU << (4U * (position & 0x03U)));
@@ -362,6 +330,22 @@ void HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin)
         EXTI->RTSR &= ~((uint32_t)iocurrent);
         EXTI->FTSR &= ~((uint32_t)iocurrent);
       }
+
+      /*------------------------- GPIO Mode Configuration --------------------*/
+      /* Configure IO Direction in Input Floating Mode */
+      GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2U));
+
+      /* Configure the default Alternate Function in current IO */
+      GPIOx->AFR[position >> 3U] &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ;
+
+      /* Configure the default value for IO Speed */
+      GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
+
+      /* Configure the default value IO Output Type */
+      GPIOx->OTYPER  &= ~(GPIO_OTYPER_OT_0 << position) ;
+
+      /* Deactivate the Pull-up and Pull-down resistor for the current IO */
+      GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
     }
   }
 }
@@ -453,7 +437,14 @@ void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
   /* Check the parameters */
   assert_param(IS_GPIO_PIN(GPIO_Pin));
 
-  GPIOx->ODR ^= GPIO_Pin;
+  if ((GPIOx->ODR & GPIO_Pin) == GPIO_Pin)
+  {
+    GPIOx->BSRR = (uint32_t)GPIO_Pin << GPIO_NUMBER;
+  }
+  else
+  {
+    GPIOx->BSRR = GPIO_Pin;
+  }
 }
 
 /**

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c

@@ -3,57 +3,41 @@
   * @file    stm32f4xx_hal_i2c_ex.c
   * @author  MCD Application Team
   * @brief   I2C Extension HAL module driver.
-  *          This file provides firmware functions to manage the following 
+  *          This file provides firmware functions to manage the following
   *          functionalities of I2C extension peripheral:
   *           + Extension features functions
-  *    
+  *
   @verbatim
   ==============================================================================
                ##### I2C peripheral extension features  #####
   ==============================================================================
-           
-  [..] Comparing to other previous devices, the I2C interface for STM32F427xx/437xx/ 
+
+  [..] Comparing to other previous devices, the I2C interface for STM32F427xx/437xx/
        429xx/439xx devices contains the following additional features :
-       
+
        (+) Possibility to disable or enable Analog Noise Filter
        (+) Use of a configured Digital Noise Filter
-   
+
                      ##### How to use this driver #####
   ==============================================================================
   [..] This driver provides functions to configure Noise Filter
     (#) Configure I2C Analog noise filter using the function HAL_I2C_AnalogFilter_Config()
     (#) Configure I2C Digital noise filter using the function HAL_I2C_DigitalFilter_Config()
-  
+
   @endverbatim
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
-  */ 
+  */
 
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f4xx_hal.h"
@@ -69,9 +53,7 @@
 
 #ifdef HAL_I2C_MODULE_ENABLED
 
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
-    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) ||\
-    defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || defined(STM32F423xx)
+#if  defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF)
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
 /* Private macro -------------------------------------------------------------*/
@@ -83,22 +65,22 @@
   */
 
 
-/** @defgroup I2CEx_Exported_Functions_Group1 Extension features functions 
- *  @brief   Extension features functions 
+/** @defgroup I2CEx_Exported_Functions_Group1 Extension features functions
+ *  @brief   Extension features functions
  *
-@verbatim   
+@verbatim
  ===============================================================================
                       ##### Extension features functions #####
- ===============================================================================  
+ ===============================================================================
     [..] This section provides functions allowing to:
-      (+) Configure Noise Filters 
+      (+) Configure Noise Filters
 
 @endverbatim
   * @{
   */
-  
+
 /**
-  * @brief  Configures I2C Analog noise filter. 
+  * @brief  Configures I2C Analog noise filter.
   * @param  hi2c pointer to a I2C_HandleTypeDef structure that contains
   *                the configuration information for the specified I2Cx peripheral.
   * @param  AnalogFilter new state of the Analog filter.
@@ -109,13 +91,13 @@ HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t
   /* Check the parameters */
   assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
   assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
-  
-  if(hi2c->State == HAL_I2C_STATE_READY)
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
   {
     hi2c->State = HAL_I2C_STATE_BUSY;
 
     /* Disable the selected I2C peripheral */
-    __HAL_I2C_DISABLE(hi2c);    
+    __HAL_I2C_DISABLE(hi2c);
 
     /* Reset I2Cx ANOFF bit */
     hi2c->Instance->FLTR &= ~(I2C_FLTR_ANOFF);
@@ -123,7 +105,7 @@ HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t
     /* Disable the analog filter */
     hi2c->Instance->FLTR |= AnalogFilter;
 
-    __HAL_I2C_ENABLE(hi2c); 
+    __HAL_I2C_ENABLE(hi2c);
 
     hi2c->State = HAL_I2C_STATE_READY;
 
@@ -136,7 +118,7 @@ HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t
 }
 
 /**
-  * @brief  Configures I2C Digital noise filter. 
+  * @brief  Configures I2C Digital noise filter.
   * @param  hi2c pointer to a I2C_HandleTypeDef structure that contains
   *                the configuration information for the specified I2Cx peripheral.
   * @param  DigitalFilter Coefficient of digital noise filter between 0x00 and 0x0F.
@@ -149,37 +131,37 @@ HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_
   /* Check the parameters */
   assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
   assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
-  
-  if(hi2c->State == HAL_I2C_STATE_READY)
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
   {
     hi2c->State = HAL_I2C_STATE_BUSY;
-    
+
     /* Disable the selected I2C peripheral */
-    __HAL_I2C_DISABLE(hi2c);  
-    
+    __HAL_I2C_DISABLE(hi2c);
+
     /* Get the old register value */
     tmpreg = hi2c->Instance->FLTR;
-    
+
     /* Reset I2Cx DNF bit [3:0] */
     tmpreg &= ~(I2C_FLTR_DNF);
-    
+
     /* Set I2Cx DNF coefficient */
     tmpreg |= DigitalFilter;
-    
+
     /* Store the new register value */
     hi2c->Instance->FLTR = tmpreg;
-    
-    __HAL_I2C_ENABLE(hi2c); 
-    
+
+    __HAL_I2C_ENABLE(hi2c);
+
     hi2c->State = HAL_I2C_STATE_READY;
-    
-    return HAL_OK; 
+
+    return HAL_OK;
   }
   else
   {
-    return HAL_BUSY; 
+    return HAL_BUSY;
   }
-}  
+}
 
 /**
   * @}
@@ -187,10 +169,8 @@ HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_
 
 /**
   * @}
-  */  
-#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F401xC ||\
-          STM32F401xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F413xx ||\
-		  STM32F423xx */
+  */
+#endif
 
 #endif /* HAL_I2C_MODULE_ENABLED */
 /**

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c

@@ -11,29 +11,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c

@@ -10,29 +10,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -365,26 +349,6 @@ HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
 }
 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
 
-#if defined(STM32F469xx) || defined(STM32F479xx)
-/**
-  * @brief Enables Wakeup Pin Detection on high level (rising edge).
-  * @retval None
-  */
-void HAL_PWREx_EnableWakeUpPinPolarityRisingEdge(void)
-{
-  *(__IO uint32_t *) CSR_WUPP_BB = (uint32_t)DISABLE;
-}
-
-/**
-  * @brief Enables Wakeup Pin Detection on low level (falling edge).
-  * @retval None
-  */
-void HAL_PWREx_EnableWakeUpPinPolarityFallingEdge(void)
-{
-  *(__IO uint32_t *) CSR_WUPP_BB = (uint32_t)ENABLE;
-}
-#endif /* STM32F469xx || STM32F479xx */
-
 #if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\
     defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\
     defined(STM32F413xx) || defined(STM32F423xx)

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c

@@ -1,105 +1,89 @@
 /**
- ******************************************************************************
- * @file    stm32f4xx_hal_rcc.c
- * @author  MCD Application Team
- * @brief   RCC HAL module driver.
- *          This file provides firmware functions to manage the following
- *          functionalities of the Reset and Clock Control (RCC) peripheral:
- *           + Initialization and de-initialization functions
- *           + Peripheral Control functions
- *
- @verbatim
- ==============================================================================
- ##### RCC specific features #####
- ==============================================================================
- [..]
- After reset the device is running from Internal High Speed oscillator
- (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache
- and I-Cache are disabled, and all peripherals are off except internal
- SRAM, Flash and JTAG.
- (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses;
- all peripherals mapped on these busses are running at HSI speed.
- (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
- (+) All GPIOs are in input floating state, except the JTAG pins which
- are assigned to be used for debug purpose.
-
- [..]
- Once the device started from reset, the user application has to:
- (+) Configure the clock source to be used to drive the System clock
- (if the application needs higher frequency/performance)
- (+) Configure the System clock frequency and Flash settings
- (+) Configure the AHB and APB busses prescalers
- (+) Enable the clock for the peripheral(s) to be used
- (+) Configure the clock source(s) for peripherals which clocks are not
- derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG)
-
- ##### RCC Limitations #####
- ==============================================================================
- [..]
- A delay between an RCC peripheral clock enable and the effective peripheral
- enabling should be taken into account in order to manage the peripheral read/write
- from/to registers.
- (+) This delay depends on the peripheral mapping.
- (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle
- after the clock enable bit is set on the hardware register
- (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle
- after the clock enable bit is set on the hardware register
-
- [..]
- Implemented Workaround:
- (+) For AHB & APB peripherals, a dummy read to the peripheral register has been
- inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rcc.c
+  * @author  MCD Application Team
+  * @brief   RCC HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Reset and Clock Control (RCC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions
+  *
+  @verbatim
+  ==============================================================================
+                      ##### RCC specific features #####
+  ==============================================================================
+    [..]
+      After reset the device is running from Internal High Speed oscillator
+      (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache
+      and I-Cache are disabled, and all peripherals are off except internal
+      SRAM, Flash and JTAG.
+      (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses;
+          all peripherals mapped on these busses are running at HSI speed.
+      (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
+      (+) All GPIOs are in input floating state, except the JTAG pins which
+          are assigned to be used for debug purpose.
+
+    [..]
+      Once the device started from reset, the user application has to:
+      (+) Configure the clock source to be used to drive the System clock
+          (if the application needs higher frequency/performance)
+      (+) Configure the System clock frequency and Flash settings
+      (+) Configure the AHB and APB busses prescalers
+      (+) Enable the clock for the peripheral(s) to be used
+      (+) Configure the clock source(s) for peripherals which clocks are not
+          derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG)
+
+                      ##### RCC Limitations #####
+  ==============================================================================
+    [..]
+      A delay between an RCC peripheral clock enable and the effective peripheral
+      enabling should be taken into account in order to manage the peripheral read/write
+      from/to registers.
+      (+) This delay depends on the peripheral mapping.
+      (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle
+          after the clock enable bit is set on the hardware register
+      (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle
+          after the clock enable bit is set on the hardware register
+
+    [..]
+      Implemented Workaround:
+      (+) For AHB & APB peripherals, a dummy read to the peripheral register has been
+          inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
 
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f4xx_hal.h"
 
 /** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
+  * @{
+  */
 
 /** @defgroup RCC RCC
- * @brief RCC HAL module driver
- * @{
- */
+  * @brief RCC HAL module driver
+  * @{
+  */
 
 #ifdef HAL_RCC_MODULE_ENABLED
 
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
 /** @addtogroup RCC_Private_Constants
- * @{
- */
+  * @{
+  */
 
 /* Private macro -------------------------------------------------------------*/
 #define __MCO1_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
@@ -110,931 +94,1004 @@
 #define MCO2_GPIO_PORT         GPIOC
 #define MCO2_PIN               GPIO_PIN_9
 /**
- * @}
- */
+  * @}
+  */
 
 /* Private variables ---------------------------------------------------------*/
 /** @defgroup RCC_Private_Variables RCC Private Variables
- * @{
- */
+  * @{
+  */
 /**
- * @}
- */
+  * @}
+  */
 /* Private function prototypes -----------------------------------------------*/
 /* Private functions ---------------------------------------------------------*/
 
 /** @defgroup RCC_Exported_Functions RCC Exported Functions
- *  @{
- */
+  *  @{
+  */
 
 /** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions
  *  @brief    Initialization and Configuration functions
  *
- @verbatim
+@verbatim
  ===============================================================================
- ##### Initialization and de-initialization functions #####
+           ##### Initialization and de-initialization functions #####
  ===============================================================================
- [..]
- This section provides functions allowing to configure the internal/external oscillators
- (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1
- and APB2).
-
- [..] Internal/external clock and PLL configuration
- (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through
- the PLL as System clock source.
-
- (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC
- clock source.
-
- (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or
- through the PLL as System clock source. Can be used also as RTC clock source.
-
- (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
-
- (#) PLL (clocked by HSI or HSE), featuring two different output clocks:
- (++) The first output is used to generate the high speed system clock (up to 168 MHz)
- (++) The second output is used to generate the clock for the USB OTG FS (48 MHz),
- the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz).
-
- (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
- and if a HSE clock failure occurs(HSE used directly or through PLL as System
- clock source), the System clocks automatically switched to HSI and an interrupt
- is generated if enabled. The interrupt is linked to the Cortex-M4 NMI
- (Non-Maskable Interrupt) exception vector.
-
- (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
- clock (through a configurable prescaler) on PA8 pin.
-
- (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S
- clock (through a configurable prescaler) on PC9 pin.
-
- [..] System, AHB and APB busses clocks configuration
- (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
- HSE and PLL.
- The AHB clock (HCLK) is derived from System clock through configurable
- prescaler and used to clock the CPU, memory and peripherals mapped
- on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived
- from AHB clock through configurable prescalers and used to clock
- the peripherals mapped on these busses. You can use
- "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
-
- (#) For the STM32F405xx/07xx and STM32F415xx/17xx devices, the maximum
- frequency of the SYSCLK and HCLK is 168 MHz, PCLK2 84 MHz and PCLK1 42 MHz.
- Depending on the device voltage range, the maximum frequency should
- be adapted accordingly (refer to the product datasheets for more details).
-
- (#) For the STM32F42xxx, STM32F43xxx, STM32F446xx, STM32F469xx and STM32F479xx devices,
- the maximum frequency of the SYSCLK and HCLK is 180 MHz, PCLK2 90 MHz and PCLK1 45 MHz.
- Depending on the device voltage range, the maximum frequency should
- be adapted accordingly (refer to the product datasheets for more details).
-
- (#) For the STM32F401xx, the maximum frequency of the SYSCLK and HCLK is 84 MHz,
- PCLK2 84 MHz and PCLK1 42 MHz.
- Depending on the device voltage range, the maximum frequency should
- be adapted accordingly (refer to the product datasheets for more details).
-
- (#) For the STM32F41xxx, the maximum frequency of the SYSCLK and HCLK is 100 MHz,
- PCLK2 100 MHz and PCLK1 50 MHz.
- Depending on the device voltage range, the maximum frequency should
- be adapted accordingly (refer to the product datasheets for more details).
-
- @endverbatim
- * @{
- */
+    [..]
+      This section provides functions allowing to configure the internal/external oscillators
+      (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1
+       and APB2).
+
+    [..] Internal/external clock and PLL configuration
+         (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through
+             the PLL as System clock source.
+
+         (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC
+             clock source.
+
+         (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or
+             through the PLL as System clock source. Can be used also as RTC clock source.
+
+         (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
+
+         (#) PLL (clocked by HSI or HSE), featuring two different output clocks:
+           (++) The first output is used to generate the high speed system clock (up to 168 MHz)
+           (++) The second output is used to generate the clock for the USB OTG FS (48 MHz),
+                the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz).
+
+         (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
+             and if a HSE clock failure occurs(HSE used directly or through PLL as System
+             clock source), the System clocks automatically switched to HSI and an interrupt
+             is generated if enabled. The interrupt is linked to the Cortex-M4 NMI
+             (Non-Maskable Interrupt) exception vector.
+
+         (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
+             clock (through a configurable prescaler) on PA8 pin.
+
+         (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S
+             clock (through a configurable prescaler) on PC9 pin.
+
+    [..] System, AHB and APB busses clocks configuration
+         (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
+             HSE and PLL.
+             The AHB clock (HCLK) is derived from System clock through configurable
+             prescaler and used to clock the CPU, memory and peripherals mapped
+             on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived
+             from AHB clock through configurable prescalers and used to clock
+             the peripherals mapped on these busses. You can use
+             "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
+
+         (#) For the STM32F405xx/07xx and STM32F415xx/17xx devices, the maximum
+             frequency of the SYSCLK and HCLK is 168 MHz, PCLK2 84 MHz and PCLK1 42 MHz.
+             Depending on the device voltage range, the maximum frequency should
+             be adapted accordingly (refer to the product datasheets for more details).
+
+         (#) For the STM32F42xxx, STM32F43xxx, STM32F446xx, STM32F469xx and STM32F479xx devices,
+             the maximum frequency of the SYSCLK and HCLK is 180 MHz, PCLK2 90 MHz and PCLK1 45 MHz.
+             Depending on the device voltage range, the maximum frequency should
+             be adapted accordingly (refer to the product datasheets for more details).
+
+         (#) For the STM32F401xx, the maximum frequency of the SYSCLK and HCLK is 84 MHz,
+             PCLK2 84 MHz and PCLK1 42 MHz.
+             Depending on the device voltage range, the maximum frequency should
+             be adapted accordingly (refer to the product datasheets for more details).
+
+         (#) For the STM32F41xxx, the maximum frequency of the SYSCLK and HCLK is 100 MHz,
+             PCLK2 100 MHz and PCLK1 50 MHz.
+             Depending on the device voltage range, the maximum frequency should
+             be adapted accordingly (refer to the product datasheets for more details).
+
+@endverbatim
+  * @{
+  */
 
 /**
- * @brief  Resets the RCC clock configuration to the default reset state.
- * @note   The default reset state of the clock configuration is given below:
- *            - HSI ON and used as system clock source
- *            - HSE and PLL OFF
- *            - AHB, APB1 and APB2 prescaler set to 1.
- *            - CSS, MCO1 and MCO2 OFF
- *            - All interrupts disabled
- * @note   This function doesn't modify the configuration of the
- *            - Peripheral clocks
- *            - LSI, LSE and RTC clocks
- * @retval HAL status
- */
-__weak HAL_StatusTypeDef HAL_RCC_DeInit(void) {
-	return HAL_OK;
+  * @brief  Resets the RCC clock configuration to the default reset state.
+  * @note   The default reset state of the clock configuration is given below:
+  *            - HSI ON and used as system clock source
+  *            - HSE and PLL OFF
+  *            - AHB, APB1 and APB2 prescaler set to 1.
+  *            - CSS, MCO1 and MCO2 OFF
+  *            - All interrupts disabled
+  * @note   This function doesn't modify the configuration of the
+  *            - Peripheral clocks
+  *            - LSI, LSE and RTC clocks
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_RCC_DeInit(void)
+{
+  return HAL_OK;
 }
 
 /**
- * @brief  Initializes the RCC Oscillators according to the specified parameters in the
- *         RCC_OscInitTypeDef.
- * @param  RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
- *         contains the configuration information for the RCC Oscillators.
- * @note   The PLL is not disabled when used as system clock.
- * @note   Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
- *         supported by this API. User should request a transition to LSE Off
- *         first and then LSE On or LSE Bypass.
- * @note   Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
- *         supported by this API. User should request a transition to HSE Off
- *         first and then HSE On or HSE Bypass.
- * @retval HAL status
- */
-__weak HAL_StatusTypeDef HAL_RCC_OscConfig(
-		RCC_OscInitTypeDef *RCC_OscInitStruct) {
-	uint32_t tickstart;
-
-	/* Check Null pointer */
-	if (RCC_OscInitStruct == NULL) {
-		return HAL_ERROR;
-	}
-
-	/* Check the parameters */
-	assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
-	/*------------------------------- HSE Configuration ------------------------*/
-	if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE)
-			== RCC_OSCILLATORTYPE_HSE) {
-		/* Check the parameters */
-		assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
-		/* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */
-		if ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE)
-				|| ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL)
-						&& ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC)
-								== RCC_PLLCFGR_PLLSRC_HSE))) {
-			if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
-					&& (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) {
-				return HAL_ERROR;
-			}
-		} else {
-			/* Set the new HSE configuration ---------------------------------------*/
-			__HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
-
-			/* Check the HSE State */
-			if ((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF) {
-				/* Get Start Tick */
-				tickstart = HAL_GetTick();
-
-				/* Wait till HSE is ready */
-				while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) {
-					if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) {
-						return HAL_TIMEOUT;
-					}
-				}
-			} else {
-				/* Get Start Tick */
-				tickstart = HAL_GetTick();
-
-				/* Wait till HSE is bypassed or disabled */
-				while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) {
-					if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) {
-						return HAL_TIMEOUT;
-					}
-				}
-			}
-		}
-	}
-	/*----------------------------- HSI Configuration --------------------------*/
-	if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI)
-			== RCC_OSCILLATORTYPE_HSI) {
-		/* Check the parameters */
-		assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
-		assert_param(
-				IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
-
-		/* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
-		if ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI)
-				|| ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL)
-						&& ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC)
-								== RCC_PLLCFGR_PLLSRC_HSI))) {
-			/* When HSI is used as system clock it will not disabled */
-			if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
-					&& (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) {
-				return HAL_ERROR;
-			}
-			/* Otherwise, just the calibration is allowed */
-			else {
-				/* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
-				__HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(
-						RCC_OscInitStruct->HSICalibrationValue);
-			}
-		} else {
-			/* Check the HSI State */
-			if ((RCC_OscInitStruct->HSIState) != RCC_HSI_OFF) {
-				/* Enable the Internal High Speed oscillator (HSI). */
-				__HAL_RCC_HSI_ENABLE();
-
-				/* Get Start Tick*/
-				tickstart = HAL_GetTick();
-
-				/* Wait till HSI is ready */
-				while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) {
-					if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) {
-						return HAL_TIMEOUT;
-					}
-				}
-
-				/* Adjusts the Internal High Speed oscillator (HSI) calibration value. */
-				__HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(
-						RCC_OscInitStruct->HSICalibrationValue);
-			} else {
-				/* Disable the Internal High Speed oscillator (HSI). */
-				__HAL_RCC_HSI_DISABLE();
-
-				/* Get Start Tick*/
-				tickstart = HAL_GetTick();
-
-				/* Wait till HSI is ready */
-				while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) {
-					if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) {
-						return HAL_TIMEOUT;
-					}
-				}
-			}
-		}
-	}
-	/*------------------------------ LSI Configuration -------------------------*/
-	if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI)
-			== RCC_OSCILLATORTYPE_LSI) {
-		/* Check the parameters */
-		assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
-
-		/* Check the LSI State */
-		if ((RCC_OscInitStruct->LSIState) != RCC_LSI_OFF) {
-			/* Enable the Internal Low Speed oscillator (LSI). */
-			__HAL_RCC_LSI_ENABLE();
-
-			/* Get Start Tick*/
-			tickstart = HAL_GetTick();
-
-			/* Wait till LSI is ready */
-			while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) {
-				if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) {
-					return HAL_TIMEOUT;
-				}
-			}
-		} else {
-			/* Disable the Internal Low Speed oscillator (LSI). */
-			__HAL_RCC_LSI_DISABLE();
-
-			/* Get Start Tick */
-			tickstart = HAL_GetTick();
-
-			/* Wait till LSI is ready */
-			while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) {
-				if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) {
-					return HAL_TIMEOUT;
-				}
-			}
-		}
-	}
-	/*------------------------------ LSE Configuration -------------------------*/
-	if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE)
-			== RCC_OSCILLATORTYPE_LSE) {
-		FlagStatus pwrclkchanged = RESET;
-
-		/* Check the parameters */
-		assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
-
-		/* Update LSE configuration in Backup Domain control register    */
-		/* Requires to enable write access to Backup Domain of necessary */
-		if (__HAL_RCC_PWR_IS_CLK_DISABLED()) {
-			__HAL_RCC_PWR_CLK_ENABLE()
-			;
-			pwrclkchanged = SET;
-		}
-
-		if (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) {
-			/* Enable write access to Backup domain */
-			SET_BIT(PWR->CR, PWR_CR_DBP);
-
-			/* Wait for Backup domain Write protection disable */
-			tickstart = HAL_GetTick();
-
-			while (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) {
-				if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) {
-					return HAL_TIMEOUT;
-				}
-			}
-		}
-
-		/* Set the new LSE configuration -----------------------------------------*/
-		__HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
-		/* Check the LSE State */
-		if ((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF) {
-			/* Get Start Tick*/
-			tickstart = HAL_GetTick();
-
-			/* Wait till LSE is ready */
-			while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) {
-				if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) {
-					return HAL_TIMEOUT;
-				}
-			}
-		} else {
-			/* Get Start Tick */
-			tickstart = HAL_GetTick();
-
-			/* Wait till LSE is ready */
-			while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) {
-				if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) {
-					return HAL_TIMEOUT;
-				}
-			}
-		}
-
-		/* Restore clock configuration if changed */
-		if (pwrclkchanged == SET) {
-			__HAL_RCC_PWR_CLK_DISABLE();
-		}
-	}
-	/*-------------------------------- PLL Configuration -----------------------*/
-	/* Check the parameters */
-	assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
-	if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) {
-		/* Check if the PLL is used as system clock or not */
-		if (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) {
-			if ((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) {
-				/* Check the parameters */
-				assert_param(
-						IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
-				assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
-				assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
-				assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
-				assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
-
-				/* Disable the main PLL. */
-				__HAL_RCC_PLL_DISABLE();
-
-				/* Get Start Tick */
-				tickstart = HAL_GetTick();
-
-				/* Wait till PLL is ready */
-				while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) {
-					if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) {
-						return HAL_TIMEOUT;
-					}
-				}
-
-				/* Configure the main PLL clock source, multiplication and division factors. */
-				WRITE_REG(RCC->PLLCFGR,
-						(RCC_OscInitStruct->PLL.PLLSource | RCC_OscInitStruct->PLL.PLLM | (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos) | (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos) | (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)));
-				/* Enable the main PLL. */
-				__HAL_RCC_PLL_ENABLE();
-
-				/* Get Start Tick */
-				tickstart = HAL_GetTick();
-
-				/* Wait till PLL is ready */
-				while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) {
-					if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) {
-						return HAL_TIMEOUT;
-					}
-				}
-			} else {
-				/* Disable the main PLL. */
-				__HAL_RCC_PLL_DISABLE();
-
-				/* Get Start Tick */
-				tickstart = HAL_GetTick();
-
-				/* Wait till PLL is ready */
-				while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) {
-					if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) {
-						return HAL_TIMEOUT;
-					}
-				}
-			}
-		} else {
-			return HAL_ERROR;
-		}
-	}
-	return HAL_OK;
+  * @brief  Initializes the RCC Oscillators according to the specified parameters in the
+  *         RCC_OscInitTypeDef.
+  * @param  RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
+  *         contains the configuration information for the RCC Oscillators.
+  * @note   The PLL is not disabled when used as system clock.
+  * @note   Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
+  *         supported by this API. User should request a transition to LSE Off
+  *         first and then LSE On or LSE Bypass.
+  * @note   Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+  *         supported by this API. User should request a transition to HSE Off
+  *         first and then HSE On or HSE Bypass.
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
+{
+  uint32_t tickstart;
+
+  /* Check Null pointer */
+  if(RCC_OscInitStruct == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+  /*------------------------------- HSE Configuration ------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+    /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\
+      ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
+    {
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+      {
+        return HAL_ERROR;
+      }
+    }
+    else
+    {
+      /* Set the new HSE configuration ---------------------------------------*/
+      __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+
+      /* Check the HSE State */
+      if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF)
+      {
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSE is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSE is bypassed or disabled */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+  }
+  /*----------------------------- HSI Configuration --------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+    assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+    /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\
+      ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
+    {
+      /* When HSI is used as system clock it will not disabled */
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+      {
+        return HAL_ERROR;
+      }
+      /* Otherwise, just the calibration is allowed */
+      else
+      {
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+      }
+    }
+    else
+    {
+      /* Check the HSI State */
+      if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
+      {
+        /* Enable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_ENABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSI is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value. */
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+      }
+      else
+      {
+        /* Disable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_DISABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSI is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+  }
+  /*------------------------------ LSI Configuration -------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+    /* Check the LSI State */
+    if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
+    {
+      /* Enable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_ENABLE();
+
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSI is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    else
+    {
+      /* Disable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_DISABLE();
+
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSI is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /*------------------------------ LSE Configuration -------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+  {
+    FlagStatus       pwrclkchanged = RESET;
+
+    /* Check the parameters */
+    assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+    /* Update LSE configuration in Backup Domain control register    */
+    /* Requires to enable write access to Backup Domain of necessary */
+    if(__HAL_RCC_PWR_IS_CLK_DISABLED())
+    {
+      __HAL_RCC_PWR_CLK_ENABLE();
+      pwrclkchanged = SET;
+    }
+
+    if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+    {
+      /* Enable write access to Backup domain */
+      SET_BIT(PWR->CR, PWR_CR_DBP);
+
+      /* Wait for Backup domain Write protection disable */
+      tickstart = HAL_GetTick();
+
+      while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+      {
+        if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Set the new LSE configuration -----------------------------------------*/
+    __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+    /* Check the LSE State */
+    if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
+    {
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSE is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    else
+    {
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSE is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Restore clock configuration if changed */
+    if(pwrclkchanged == SET)
+    {
+      __HAL_RCC_PWR_CLK_DISABLE();
+    }
+  }
+  /*-------------------------------- PLL Configuration -----------------------*/
+  /* Check the parameters */
+  assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+  if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+  {
+    /* Check if the PLL is used as system clock or not */
+    if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+    {
+      if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+      {
+        /* Check the parameters */
+        assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+        assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
+        assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
+        assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
+        assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
+
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+
+        /* Configure the main PLL clock source, multiplication and division factors. */
+        WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource                                            | \
+                                 RCC_OscInitStruct->PLL.PLLM                                                 | \
+                                 (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos)             | \
+                                 (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos) | \
+                                 (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)));
+        /* Enable the main PLL. */
+        __HAL_RCC_PLL_ENABLE();
+
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+    else
+    {
+      return HAL_ERROR;
+    }
+  }
+  return HAL_OK;
 }
 
 /**
- * @brief  Initializes the CPU, AHB and APB busses clocks according to the specified
- *         parameters in the RCC_ClkInitStruct.
- * @param  RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that
- *         contains the configuration information for the RCC peripheral.
- * @param  FLatency FLASH Latency, this parameter depend on device selected
- *
- * @note   The SystemCoreClock CMSIS variable is used to store System Clock Frequency
- *         and updated by HAL_RCC_GetHCLKFreq() function called within this function
- *
- * @note   The HSI is used (enabled by hardware) as system clock source after
- *         startup from Reset, wake-up from STOP and STANDBY mode, or in case
- *         of failure of the HSE used directly or indirectly as system clock
- *         (if the Clock Security System CSS is enabled).
- *
- * @note   A switch from one clock source to another occurs only if the target
- *         clock source is ready (clock stable after startup delay or PLL locked).
- *         If a clock source which is not yet ready is selected, the switch will
- *         occur when the clock source will be ready.
- *
- * @note   Depending on the device voltage range, the software has to set correctly
- *         HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency
- *         (for more details refer to section above "Initialization/de-initialization functions")
- * @retval None
- */
-HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct,
-		uint32_t FLatency) {
-	uint32_t tickstart;
-
-	/* Check Null pointer */
-	if (RCC_ClkInitStruct == NULL) {
-		return HAL_ERROR;
-	}
-
-	/* Check the parameters */
-	assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
-	assert_param(IS_FLASH_LATENCY(FLatency));
-
-	/* To correctly read data from FLASH memory, the number of wait states (LATENCY)
-	 must be correctly programmed according to the frequency of the CPU clock
-	 (HCLK) and the supply voltage of the device. */
-
-	/* Increasing the number of wait states because of higher CPU frequency */
-	if (FLatency > __HAL_FLASH_GET_LATENCY()) {
-		/* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
-		__HAL_FLASH_SET_LATENCY(FLatency);
-
-		/* Check that the new number of wait states is taken into account to access the Flash
-		 memory by reading the FLASH_ACR register */
-		if (__HAL_FLASH_GET_LATENCY() != FLatency) {
-			return HAL_ERROR;
-		}
-	}
-
-	/*-------------------------- HCLK Configuration --------------------------*/
-	if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK)
-			== RCC_CLOCKTYPE_HCLK) {
-		/* Set the highest APBx dividers in order to ensure that we do not go through
-		 a non-spec phase whatever we decrease or increase HCLK. */
-		if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1)
-				== RCC_CLOCKTYPE_PCLK1) {
-			MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16);
-		}
-
-		if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2)
-				== RCC_CLOCKTYPE_PCLK2) {
-			MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3));
-		}
-
-		assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
-		MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
-	}
-
-	/*------------------------- SYSCLK Configuration ---------------------------*/
-	if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK)
-			== RCC_CLOCKTYPE_SYSCLK) {
-		assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
-
-		/* HSE is selected as System Clock Source */
-		if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) {
-			/* Check the HSE ready flag */
-			if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) {
-				return HAL_ERROR;
-			}
-		}
-		/* PLL is selected as System Clock Source */
-		else if ((RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
-				|| (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK)) {
-			/* Check the PLL ready flag */
-			if (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) {
-				return HAL_ERROR;
-			}
-		}
-		/* HSI is selected as System Clock Source */
-		else {
-			/* Check the HSI ready flag */
-			if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) {
-				return HAL_ERROR;
-			}
-		}
-
-		__HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
-
-		/* Get Start Tick */
-		tickstart = HAL_GetTick();
-
-		while (__HAL_RCC_GET_SYSCLK_SOURCE()
-				!= (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) {
-			if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) {
-				return HAL_TIMEOUT;
-			}
-		}
-	}
-
-	/* Decreasing the number of wait states because of lower CPU frequency */
-	if (FLatency < __HAL_FLASH_GET_LATENCY()) {
-		/* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
-		__HAL_FLASH_SET_LATENCY(FLatency);
-
-		/* Check that the new number of wait states is taken into account to access the Flash
-		 memory by reading the FLASH_ACR register */
-		if (__HAL_FLASH_GET_LATENCY() != FLatency) {
-			return HAL_ERROR;
-		}
-	}
-
-	/*-------------------------- PCLK1 Configuration ---------------------------*/
-	if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1)
-			== RCC_CLOCKTYPE_PCLK1) {
-		assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
-		MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1,
-				RCC_ClkInitStruct->APB1CLKDivider);
-	}
-
-	/*-------------------------- PCLK2 Configuration ---------------------------*/
-	if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2)
-			== RCC_CLOCKTYPE_PCLK2) {
-		assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
-		MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2,
-				((RCC_ClkInitStruct->APB2CLKDivider) << 3U));
-	}
-
-	/* Update the SystemCoreClock global variable */
-	SystemCoreClock = HAL_RCC_GetSysClockFreq()
-			>> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos];
-
-	/* Configure the source of time base considering new system clocks settings */
-	HAL_InitTick(TICK_INT_PRIORITY);
-
-	return HAL_OK;
+  * @brief  Initializes the CPU, AHB and APB busses clocks according to the specified
+  *         parameters in the RCC_ClkInitStruct.
+  * @param  RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that
+  *         contains the configuration information for the RCC peripheral.
+  * @param  FLatency FLASH Latency, this parameter depend on device selected
+  *
+  * @note   The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+  *         and updated by HAL_RCC_GetHCLKFreq() function called within this function
+  *
+  * @note   The HSI is used (enabled by hardware) as system clock source after
+  *         startup from Reset, wake-up from STOP and STANDBY mode, or in case
+  *         of failure of the HSE used directly or indirectly as system clock
+  *         (if the Clock Security System CSS is enabled).
+  *
+  * @note   A switch from one clock source to another occurs only if the target
+  *         clock source is ready (clock stable after startup delay or PLL locked).
+  *         If a clock source which is not yet ready is selected, the switch will
+  *         occur when the clock source will be ready.
+  *
+  * @note   Depending on the device voltage range, the software has to set correctly
+  *         HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency
+  *         (for more details refer to section above "Initialization/de-initialization functions")
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef  *RCC_ClkInitStruct, uint32_t FLatency)
+{
+  uint32_t tickstart;
+
+  /* Check Null pointer */
+  if(RCC_ClkInitStruct == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
+  assert_param(IS_FLASH_LATENCY(FLatency));
+
+  /* To correctly read data from FLASH memory, the number of wait states (LATENCY)
+    must be correctly programmed according to the frequency of the CPU clock
+    (HCLK) and the supply voltage of the device. */
+
+  /* Increasing the number of wait states because of higher CPU frequency */
+  if(FLatency > __HAL_FLASH_GET_LATENCY())
+  {
+    /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+    __HAL_FLASH_SET_LATENCY(FLatency);
+
+    /* Check that the new number of wait states is taken into account to access the Flash
+    memory by reading the FLASH_ACR register */
+    if(__HAL_FLASH_GET_LATENCY() != FLatency)
+    {
+      return HAL_ERROR;
+    }
+  }
+
+  /*-------------------------- HCLK Configuration --------------------------*/
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+  {
+    /* Set the highest APBx dividers in order to ensure that we do not go through
+       a non-spec phase whatever we decrease or increase HCLK. */
+    if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+    {
+      MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16);
+    }
+
+    if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
+    {
+      MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3));
+    }
+
+    assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+    MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+  }
+
+  /*------------------------- SYSCLK Configuration ---------------------------*/
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+  {
+    assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+
+    /* HSE is selected as System Clock Source */
+    if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+    {
+      /* Check the HSE ready flag */
+      if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+      {
+        return HAL_ERROR;
+      }
+    }
+    /* PLL is selected as System Clock Source */
+    else if((RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)   ||
+            (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK))
+    {
+      /* Check the PLL ready flag */
+      if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+      {
+        return HAL_ERROR;
+      }
+    }
+    /* HSI is selected as System Clock Source */
+    else
+    {
+      /* Check the HSI ready flag */
+      if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+      {
+        return HAL_ERROR;
+      }
+    }
+
+    __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
+
+    /* Get Start Tick */
+    tickstart = HAL_GetTick();
+
+    while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos))
+    {
+      if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Decreasing the number of wait states because of lower CPU frequency */
+  if(FLatency < __HAL_FLASH_GET_LATENCY())
+  {
+     /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+    __HAL_FLASH_SET_LATENCY(FLatency);
+
+    /* Check that the new number of wait states is taken into account to access the Flash
+    memory by reading the FLASH_ACR register */
+    if(__HAL_FLASH_GET_LATENCY() != FLatency)
+    {
+      return HAL_ERROR;
+    }
+  }
+
+  /*-------------------------- PCLK1 Configuration ---------------------------*/
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+  {
+    assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
+    MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider);
+  }
+
+  /*-------------------------- PCLK2 Configuration ---------------------------*/
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
+  {
+    assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
+    MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U));
+  }
+
+  /* Update the SystemCoreClock global variable */
+  SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_Pos];
+
+  /* Configure the source of time base considering new system clocks settings */
+  HAL_InitTick (TICK_INT_PRIORITY);
+
+  return HAL_OK;
 }
 
 /**
- * @}
- */
+  * @}
+  */
 
 /** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions
  *  @brief   RCC clocks control functions
  *
- @verbatim
+@verbatim
  ===============================================================================
- ##### Peripheral Control functions #####
+                      ##### Peripheral Control functions #####
  ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the RCC Clocks
- frequencies.
+    [..]
+    This subsection provides a set of functions allowing to control the RCC Clocks
+    frequencies.
 
- @endverbatim
- * @{
- */
+@endverbatim
+  * @{
+  */
 
 /**
- * @brief  Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9).
- * @note   PA8/PC9 should be configured in alternate function mode.
- * @param  RCC_MCOx specifies the output direction for the clock source.
- *          This parameter can be one of the following values:
- *            @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8).
- *            @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9).
- * @param  RCC_MCOSource specifies the clock source to output.
- *          This parameter can be one of the following values:
- *            @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
- *            @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
- *            @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
- *            @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
- *            @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
- *            @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx
- *            @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices
- *            @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
- *            @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
- * @param  RCC_MCODiv specifies the MCOx prescaler.
- *          This parameter can be one of the following values:
- *            @arg RCC_MCODIV_1: no division applied to MCOx clock
- *            @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
- *            @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
- *            @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
- *            @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
- * @note  For STM32F410Rx devices to output I2SCLK clock on MCO2 you should have
- *        at last one of the SPI clocks enabled (SPI1, SPI2 or SPI5).
- * @retval None
- */
-void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource,
-		uint32_t RCC_MCODiv) {
-	GPIO_InitTypeDef GPIO_InitStruct;
-	/* Check the parameters */
-	assert_param(IS_RCC_MCO(RCC_MCOx));
-	assert_param(IS_RCC_MCODIV(RCC_MCODiv));
-	/* RCC_MCO1 */
-	if (RCC_MCOx == RCC_MCO1) {
-		assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
-
-		/* MCO1 Clock Enable */
-		__MCO1_CLK_ENABLE()
-		;
-
-		/* Configure the MCO1 pin in alternate function mode */
-		GPIO_InitStruct.Pin = MCO1_PIN;
-		GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-		GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-		GPIO_InitStruct.Pull = GPIO_NOPULL;
-		GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
-		HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct);
-
-		/* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */
-		MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE),
-				(RCC_MCOSource | RCC_MCODiv));
-
-		/* This RCC MCO1 enable feature is available only on STM32F410xx devices */
+  * @brief  Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9).
+  * @note   PA8/PC9 should be configured in alternate function mode.
+  * @param  RCC_MCOx specifies the output direction for the clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8).
+  *            @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9).
+  * @param  RCC_MCOSource specifies the clock source to output.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
+  *            @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
+  *            @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
+  *            @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
+  *            @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
+  *            @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx
+  *            @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices
+  *            @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
+  *            @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
+  * @param  RCC_MCODiv specifies the MCOx prescaler.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_MCODIV_1: no division applied to MCOx clock
+  *            @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+  *            @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+  *            @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+  *            @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+  * @note  For STM32F410Rx devices to output I2SCLK clock on MCO2 you should have
+  *        at last one of the SPI clocks enabled (SPI1, SPI2 or SPI5).
+  * @retval None
+  */
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
+{
+  GPIO_InitTypeDef GPIO_InitStruct;
+  /* Check the parameters */
+  assert_param(IS_RCC_MCO(RCC_MCOx));
+  assert_param(IS_RCC_MCODIV(RCC_MCODiv));
+  /* RCC_MCO1 */
+  if(RCC_MCOx == RCC_MCO1)
+  {
+    assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
+
+    /* MCO1 Clock Enable */
+    __MCO1_CLK_ENABLE();
+
+    /* Configure the MCO1 pin in alternate function mode */
+    GPIO_InitStruct.Pin = MCO1_PIN;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+    HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct);
+
+    /* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */
+    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv));
+
+   /* This RCC MCO1 enable feature is available only on STM32F410xx devices */
 #if defined(RCC_CFGR_MCO1EN)
-		__HAL_RCC_MCO1_ENABLE();
+    __HAL_RCC_MCO1_ENABLE();
 #endif /* RCC_CFGR_MCO1EN */
-	}
+  }
 #if defined(RCC_CFGR_MCO2)
-	else {
-		assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource));
-
-		/* MCO2 Clock Enable */
-		__MCO2_CLK_ENABLE()
-		;
-
-		/* Configure the MCO2 pin in alternate function mode */
-		GPIO_InitStruct.Pin = MCO2_PIN;
-		GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-		GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-		GPIO_InitStruct.Pull = GPIO_NOPULL;
-		GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
-		HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct);
-
-		/* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */
-		MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE),
-				(RCC_MCOSource | (RCC_MCODiv << 3U)));
-
-		/* This RCC MCO2 enable feature is available only on STM32F410Rx devices */
+  else
+  {
+    assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource));
+
+    /* MCO2 Clock Enable */
+    __MCO2_CLK_ENABLE();
+
+    /* Configure the MCO2 pin in alternate function mode */
+    GPIO_InitStruct.Pin = MCO2_PIN;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+    HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct);
+
+    /* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */
+    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3U)));
+
+   /* This RCC MCO2 enable feature is available only on STM32F410Rx devices */
 #if defined(RCC_CFGR_MCO2EN)
-		__HAL_RCC_MCO2_ENABLE();
+    __HAL_RCC_MCO2_ENABLE();
 #endif /* RCC_CFGR_MCO2EN */
-	}
+  }
 #endif /* RCC_CFGR_MCO2 */
 }
 
 /**
- * @brief  Enables the Clock Security System.
- * @note   If a failure is detected on the HSE oscillator clock, this oscillator
- *         is automatically disabled and an interrupt is generated to inform the
- *         software about the failure (Clock Security System Interrupt, CSSI),
- *         allowing the MCU to perform rescue operations. The CSSI is linked to
- *         the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector.
- * @retval None
- */
-void HAL_RCC_EnableCSS(void) {
-	*(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t) ENABLE;
+  * @brief  Enables the Clock Security System.
+  * @note   If a failure is detected on the HSE oscillator clock, this oscillator
+  *         is automatically disabled and an interrupt is generated to inform the
+  *         software about the failure (Clock Security System Interrupt, CSSI),
+  *         allowing the MCU to perform rescue operations. The CSSI is linked to
+  *         the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector.
+  * @retval None
+  */
+void HAL_RCC_EnableCSS(void)
+{
+  *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE;
 }
 
 /**
- * @brief  Disables the Clock Security System.
- * @retval None
- */
-void HAL_RCC_DisableCSS(void) {
-	*(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t) DISABLE;
+  * @brief  Disables the Clock Security System.
+  * @retval None
+  */
+void HAL_RCC_DisableCSS(void)
+{
+  *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE;
 }
 
 /**
- * @brief  Returns the SYSCLK frequency
- *
- * @note   The system frequency computed by this function is not the real
- *         frequency in the chip. It is calculated based on the predefined
- *         constant and the selected clock source:
- * @note     If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
- * @note     If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
- * @note     If SYSCLK source is PLL, function returns values based on HSE_VALUE(**)
- *           or HSI_VALUE(*) multiplied/divided by the PLL factors.
- * @note     (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
- *               16 MHz) but the real value may vary depending on the variations
- *               in voltage and temperature.
- * @note     (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
- *                25 MHz), user has to ensure that HSE_VALUE is same as the real
- *                frequency of the crystal used. Otherwise, this function may
- *                have wrong result.
- *
- * @note   The result of this function could be not correct when using fractional
- *         value for HSE crystal.
- *
- * @note   This function can be used by the user application to compute the
- *         baudrate for the communication peripherals or configure other parameters.
- *
- * @note   Each time SYSCLK changes, this function must be called to update the
- *         right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
- *
- *
- * @retval SYSCLK frequency
- */
-__weak uint32_t HAL_RCC_GetSysClockFreq(void) {
-	uint32_t pllm = 0U, pllvco = 0U, pllp = 0U;
-	uint32_t sysclockfreq = 0U;
-
-	/* Get SYSCLK source -------------------------------------------------------*/
-	switch (RCC->CFGR & RCC_CFGR_SWS) {
-	case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */
-	{
-		sysclockfreq = HSI_VALUE;
-		break;
-	}
-	case RCC_CFGR_SWS_HSE: /* HSE used as system clock  source */
-	{
-		sysclockfreq = HSE_VALUE;
-		break;
-	}
-	case RCC_CFGR_SWS_PLL: /* PLL used as system clock  source */
-	{
-		/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
-		 SYSCLK = PLL_VCO / PLLP */
-		pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
-		if (__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) {
-			/* HSE used as PLL clock source */
-			pllvco = (uint32_t) ((((uint64_t) HSE_VALUE
-					* ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN)
-							>> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t) pllm);
-		} else {
-			/* HSI used as PLL clock source */
-			pllvco = (uint32_t) ((((uint64_t) HSI_VALUE
-					* ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN)
-							>> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t) pllm);
-		}
-		pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos)
-				+ 1U) * 2U);
-
-		sysclockfreq = pllvco / pllp;
-		break;
-	}
-	default: {
-		sysclockfreq = HSI_VALUE;
-		break;
-	}
-	}
-	return sysclockfreq;
+  * @brief  Returns the SYSCLK frequency
+  *
+  * @note   The system frequency computed by this function is not the real
+  *         frequency in the chip. It is calculated based on the predefined
+  *         constant and the selected clock source:
+  * @note     If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+  * @note     If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
+  * @note     If SYSCLK source is PLL, function returns values based on HSE_VALUE(**)
+  *           or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  * @note     (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *               16 MHz) but the real value may vary depending on the variations
+  *               in voltage and temperature.
+  * @note     (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *                25 MHz), user has to ensure that HSE_VALUE is same as the real
+  *                frequency of the crystal used. Otherwise, this function may
+  *                have wrong result.
+  *
+  * @note   The result of this function could be not correct when using fractional
+  *         value for HSE crystal.
+  *
+  * @note   This function can be used by the user application to compute the
+  *         baudrate for the communication peripherals or configure other parameters.
+  *
+  * @note   Each time SYSCLK changes, this function must be called to update the
+  *         right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+  *
+  *
+  * @retval SYSCLK frequency
+  */
+__weak uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+  uint32_t pllm = 0U, pllvco = 0U, pllp = 0U;
+  uint32_t sysclockfreq = 0U;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  switch (RCC->CFGR & RCC_CFGR_SWS)
+  {
+    case RCC_CFGR_SWS_HSI:  /* HSI used as system clock source */
+    {
+      sysclockfreq = HSI_VALUE;
+       break;
+    }
+    case RCC_CFGR_SWS_HSE:  /* HSE used as system clock  source */
+    {
+      sysclockfreq = HSE_VALUE;
+      break;
+    }
+    case RCC_CFGR_SWS_PLL:  /* PLL used as system clock  source */
+    {
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+      SYSCLK = PLL_VCO / PLLP */
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm);
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm);
+      }
+      pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U) *2U);
+
+      sysclockfreq = pllvco/pllp;
+      break;
+    }
+    default:
+    {
+      sysclockfreq = HSI_VALUE;
+      break;
+    }
+  }
+  return sysclockfreq;
 }
 
 /**
- * @brief  Returns the HCLK frequency
- * @note   Each time HCLK changes, this function must be called to update the
- *         right HCLK value. Otherwise, any configuration based on this function will be incorrect.
- *
- * @note   The SystemCoreClock CMSIS variable is used to store System Clock Frequency
- *         and updated within this function
- * @retval HCLK frequency
- */
-uint32_t HAL_RCC_GetHCLKFreq(void) {
-	return SystemCoreClock;
+  * @brief  Returns the HCLK frequency
+  * @note   Each time HCLK changes, this function must be called to update the
+  *         right HCLK value. Otherwise, any configuration based on this function will be incorrect.
+  *
+  * @note   The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+  *         and updated within this function
+  * @retval HCLK frequency
+  */
+uint32_t HAL_RCC_GetHCLKFreq(void)
+{
+  return SystemCoreClock;
 }
 
 /**
- * @brief  Returns the PCLK1 frequency
- * @note   Each time PCLK1 changes, this function must be called to update the
- *         right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
- * @retval PCLK1 frequency
- */
-uint32_t HAL_RCC_GetPCLK1Freq(void) {
-	/* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
-	return (HAL_RCC_GetHCLKFreq()
-			>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_Pos]);
+  * @brief  Returns the PCLK1 frequency
+  * @note   Each time PCLK1 changes, this function must be called to update the
+  *         right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
+  * @retval PCLK1 frequency
+  */
+uint32_t HAL_RCC_GetPCLK1Freq(void)
+{
+  /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
+  return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> RCC_CFGR_PPRE1_Pos]);
 }
 
 /**
- * @brief  Returns the PCLK2 frequency
- * @note   Each time PCLK2 changes, this function must be called to update the
- *         right PCLK2 value. Otherwise, any configuration based on this function will be incorrect.
- * @retval PCLK2 frequency
- */
-uint32_t HAL_RCC_GetPCLK2Freq(void) {
-	/* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
-	return (HAL_RCC_GetHCLKFreq()
-			>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_Pos]);
+  * @brief  Returns the PCLK2 frequency
+  * @note   Each time PCLK2 changes, this function must be called to update the
+  *         right PCLK2 value. Otherwise, any configuration based on this function will be incorrect.
+  * @retval PCLK2 frequency
+  */
+uint32_t HAL_RCC_GetPCLK2Freq(void)
+{
+  /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
+  return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> RCC_CFGR_PPRE2_Pos]);
 }
 
 /**
- * @brief  Configures the RCC_OscInitStruct according to the internal
- * RCC configuration registers.
- * @param  RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
- * will be configured.
- * @retval None
- */
-__weak void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) {
-	/* Set all possible values for the Oscillator type parameter ---------------*/
-	RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE
-			| RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE
-			| RCC_OSCILLATORTYPE_LSI;
-
-	/* Get the HSE configuration -----------------------------------------------*/
-	if ((RCC->CR & RCC_CR_HSEBYP) == RCC_CR_HSEBYP) {
-		RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
-	} else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON) {
-		RCC_OscInitStruct->HSEState = RCC_HSE_ON;
-	} else {
-		RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
-	}
-
-	/* Get the HSI configuration -----------------------------------------------*/
-	if ((RCC->CR & RCC_CR_HSION) == RCC_CR_HSION) {
-		RCC_OscInitStruct->HSIState = RCC_HSI_ON;
-	} else {
-		RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
-	}
-
-	RCC_OscInitStruct->HSICalibrationValue = (uint32_t) ((RCC->CR
-			& RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos);
-
-	/* Get the LSE configuration -----------------------------------------------*/
-	if ((RCC->BDCR & RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) {
-		RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
-	} else if ((RCC->BDCR & RCC_BDCR_LSEON) == RCC_BDCR_LSEON) {
-		RCC_OscInitStruct->LSEState = RCC_LSE_ON;
-	} else {
-		RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
-	}
-
-	/* Get the LSI configuration -----------------------------------------------*/
-	if ((RCC->CSR & RCC_CSR_LSION) == RCC_CSR_LSION) {
-		RCC_OscInitStruct->LSIState = RCC_LSI_ON;
-	} else {
-		RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
-	}
-
-	/* Get the PLL configuration -----------------------------------------------*/
-	if ((RCC->CR & RCC_CR_PLLON) == RCC_CR_PLLON) {
-		RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
-	} else {
-		RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
-	}
-	RCC_OscInitStruct->PLL.PLLSource = (uint32_t) (RCC->PLLCFGR
-			& RCC_PLLCFGR_PLLSRC);
-	RCC_OscInitStruct->PLL.PLLM = (uint32_t) (RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
-	RCC_OscInitStruct->PLL.PLLN = (uint32_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN)
-			>> RCC_PLLCFGR_PLLN_Pos);
-	RCC_OscInitStruct->PLL.PLLP =
-			(uint32_t) ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0)
-					<< 1U) >> RCC_PLLCFGR_PLLP_Pos);
-	RCC_OscInitStruct->PLL.PLLQ = (uint32_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ)
-			>> RCC_PLLCFGR_PLLQ_Pos);
+  * @brief  Configures the RCC_OscInitStruct according to the internal
+  * RCC configuration registers.
+  * @param  RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
+  * will be configured.
+  * @retval None
+  */
+__weak void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
+{
+  /* Set all possible values for the Oscillator type parameter ---------------*/
+  RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+
+  /* Get the HSE configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+  }
+  else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+  }
+
+  /* Get the HSI configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+  {
+    RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+  }
+
+  RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos);
+
+  /* Get the LSE configuration -----------------------------------------------*/
+  if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+  }
+  else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+  }
+
+  /* Get the LSI configuration -----------------------------------------------*/
+  if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+  {
+    RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+  }
+
+  /* Get the PLL configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+  {
+    RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+  }
+  RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+  RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
+  RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
+  RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> RCC_PLLCFGR_PLLP_Pos);
+  RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos);
 }
 
 /**
- * @brief  Configures the RCC_ClkInitStruct according to the internal
- * RCC configuration registers.
- * @param  RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that
- * will be configured.
- * @param  pFLatency Pointer on the Flash Latency.
- * @retval None
- */
-void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct,
-		uint32_t *pFLatency) {
-	/* Set all possible values for the Clock type parameter --------------------*/
-	RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK
-			| RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
-
-	/* Get the SYSCLK configuration --------------------------------------------*/
-	RCC_ClkInitStruct->SYSCLKSource = (uint32_t) (RCC->CFGR & RCC_CFGR_SW);
-
-	/* Get the HCLK configuration ----------------------------------------------*/
-	RCC_ClkInitStruct->AHBCLKDivider = (uint32_t) (RCC->CFGR & RCC_CFGR_HPRE);
-
-	/* Get the APB1 configuration ----------------------------------------------*/
-	RCC_ClkInitStruct->APB1CLKDivider = (uint32_t) (RCC->CFGR & RCC_CFGR_PPRE1);
-
-	/* Get the APB2 configuration ----------------------------------------------*/
-	RCC_ClkInitStruct->APB2CLKDivider = (uint32_t) ((RCC->CFGR & RCC_CFGR_PPRE2)
-			>> 3U);
-
-	/* Get the Flash Wait State (Latency) configuration ------------------------*/
-	*pFLatency = (uint32_t) (FLASH->ACR & FLASH_ACR_LATENCY);
+  * @brief  Configures the RCC_ClkInitStruct according to the internal
+  * RCC configuration registers.
+  * @param  RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that
+  * will be configured.
+  * @param  pFLatency Pointer on the Flash Latency.
+  * @retval None
+  */
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef  *RCC_ClkInitStruct, uint32_t *pFLatency)
+{
+  /* Set all possible values for the Clock type parameter --------------------*/
+  RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+
+  /* Get the SYSCLK configuration --------------------------------------------*/
+  RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
+
+  /* Get the HCLK configuration ----------------------------------------------*/
+  RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
+
+  /* Get the APB1 configuration ----------------------------------------------*/
+  RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1);
+
+  /* Get the APB2 configuration ----------------------------------------------*/
+  RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3U);
+
+  /* Get the Flash Wait State (Latency) configuration ------------------------*/
+  *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
 }
 
 /**
- * @brief This function handles the RCC CSS interrupt request.
- * @note This API should be called under the NMI_Handler().
- * @retval None
- */
-void HAL_RCC_NMI_IRQHandler(void) {
-	/* Check RCC CSSF flag  */
-	if (__HAL_RCC_GET_IT(RCC_IT_CSS)) {
-		/* RCC Clock Security System interrupt user callback */
-		HAL_RCC_CSSCallback();
-
-		/* Clear RCC CSS pending bit */
-		__HAL_RCC_CLEAR_IT(RCC_IT_CSS);
-	}
+  * @brief This function handles the RCC CSS interrupt request.
+  * @note This API should be called under the NMI_Handler().
+  * @retval None
+  */
+void HAL_RCC_NMI_IRQHandler(void)
+{
+  /* Check RCC CSSF flag  */
+  if(__HAL_RCC_GET_IT(RCC_IT_CSS))
+  {
+    /* RCC Clock Security System interrupt user callback */
+    HAL_RCC_CSSCallback();
+
+    /* Clear RCC CSS pending bit */
+    __HAL_RCC_CLEAR_IT(RCC_IT_CSS);
+  }
 }
 
 /**
- * @brief  RCC Clock Security System interrupt callback
- * @retval None
- */
-__weak void HAL_RCC_CSSCallback(void) {
-	/* NOTE : This function Should not be modified, when the callback is needed,
-	 the HAL_RCC_CSSCallback could be implemented in the user file
-	 */
+  * @brief  RCC Clock Security System interrupt callback
+  * @retval None
+  */
+__weak void HAL_RCC_CSSCallback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RCC_CSSCallback could be implemented in the user file
+   */
 }
 
 /**
- * @}
- */
+  * @}
+  */
 
 /**
- * @}
- */
+  * @}
+  */
 
 #endif /* HAL_RCC_MODULE_ENABLED */
 /**
- * @}
- */
+  * @}
+  */
 
 /**
- * @}
- */
+  * @}
+  */
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c

@@ -10,29 +10,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

Soft/STM32/Controle/Inc/Comunication.h

@@ -0,0 +1,39 @@
+#ifndef __COMUNICATION_H
+#define __COMUNICATION_H
+
+#include "stdint.h"
+
+#define MASKMES 0XF0
+
+#define WRITETABHEU	0x00
+#define WRITETABVAL	0x10
+#define READVENT	0x30
+#define WRITVENT	0x40
+#define ERRORCOM	0x50
+#define	WRITEVAL	0x60
+#define STOP		0x70
+#define RETABLIR	0x80
+
+#define MASKID 0x07
+#define MASKTYPE 0x08
+
+uint8_t Com_dispactch(uint8_t* mes);
+
+void Com_WriteTabHeure(uint8_t* mes);
+
+void Com_WriteTabVal(uint8_t* mes);
+
+void Com_ReadVent(uint8_t* mes);
+
+void Com_WriteVent(uint8_t* mes);
+
+void Com_ERROR(uint8_t* mes);
+
+void Com_WriteVal(uint8_t* mes);
+
+void Com_STOP(uint8_t* mes);
+
+void Com_Retablir(uint8_t* mes);
+
+#endif
+

Soft/STM32/Controle/Inc/FreeRTOSConfig.h

@@ -67,7 +67,7 @@
 
  1 tab == 4 spaces!
  */
-/* USER CODE END Header */
+ /* USER CODE END Header */
 
 #ifndef FREERTOS_CONFIG_H
 #define FREERTOS_CONFIG_H
@@ -78,20 +78,20 @@
  * These definitions should be adjusted for your particular hardware and
  * application requirements.
  *
- * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
- * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ * These parameters and more are described within the 'configuration' section of the
+ * FreeRTOS API documentation available on the FreeRTOS.org web site.
  *
- * See http://www.freertos.org/a00110.html.
+ * See http://www.freertos.org/a00110.html
  *----------------------------------------------------------*/
 
-/* USER CODE BEGIN Includes */
+/* USER CODE BEGIN Includes */   	      
 /* Section where include file can be added */
-/* USER CODE END Includes */
+/* USER CODE END Includes */ 
 
 /* Ensure stdint is only used by the compiler, and not the assembler. */
 #if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
-#include <stdint.h>
-extern uint32_t SystemCoreClock;
+    #include <stdint.h>
+    extern uint32_t SystemCoreClock;
 #endif
 
 #define configUSE_PREEMPTION                     1
@@ -115,7 +115,7 @@ extern uint32_t SystemCoreClock;
 #define configMAX_CO_ROUTINE_PRIORITIES          ( 2 )
 
 /* Set the following definitions to 1 to include the API function, or zero
- to exclude the API function. */
+to exclude the API function. */
 #define INCLUDE_vTaskPrioritySet            1
 #define INCLUDE_uxTaskPriorityGet           1
 #define INCLUDE_vTaskDelete                 1
@@ -127,46 +127,46 @@ extern uint32_t SystemCoreClock;
 
 /* Cortex-M specific definitions. */
 #ifdef __NVIC_PRIO_BITS
-/* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
-#define configPRIO_BITS         __NVIC_PRIO_BITS
+ /* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
+ #define configPRIO_BITS         __NVIC_PRIO_BITS
 #else
-#define configPRIO_BITS         4
+ #define configPRIO_BITS         4
 #endif
 
 /* The lowest interrupt priority that can be used in a call to a "set priority"
- function. */
+function. */
 #define configLIBRARY_LOWEST_INTERRUPT_PRIORITY   15
 
 /* The highest interrupt priority that can be used by any interrupt service
- routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
- INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
- PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
 #define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5
 
 /* Interrupt priorities used by the kernel port layer itself.  These are generic
- to all Cortex-M ports, and do not rely on any particular library functions. */
+to all Cortex-M ports, and do not rely on any particular library functions. */
 #define configKERNEL_INTERRUPT_PRIORITY 		( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
 /* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
- See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
 #define configMAX_SYSCALL_INTERRUPT_PRIORITY 	( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
 
 /* Normal assert() semantics without relying on the provision of an assert.h
- header file. */
+header file. */
 /* USER CODE BEGIN 1 */
 #define configASSERT( x ) if ((x) == 0) {taskDISABLE_INTERRUPTS(); for( ;; );} 
 /* USER CODE END 1 */
 
 /* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
- standard names. */
+standard names. */
 #define vPortSVCHandler    SVC_Handler
 #define xPortPendSVHandler PendSV_Handler
 
-/* IMPORTANT: This define is commented when used with STM32Cube firmware, when timebase is systick,
- to prevent overwriting SysTick_Handler defined within STM32Cube HAL */
+/* IMPORTANT: This define is commented when used with STM32Cube firmware, when the timebase source is SysTick,
+              to prevent overwriting SysTick_Handler defined within STM32Cube HAL */
 #define xPortSysTickHandler SysTick_Handler
 
-/* USER CODE BEGIN Defines */
+/* USER CODE BEGIN Defines */   	      
 /* Section where parameter definitions can be added (for instance, to override default ones in FreeRTOS.h) */
-/* USER CODE END Defines */
+/* USER CODE END Defines */ 
 
 #endif /* FREERTOS_CONFIG_H */

Soft/STM32/Controle/Inc/Tab.h

@@ -19,6 +19,7 @@ typedef struct {
 	Heure Extinxtion; //Heure de Déxtintion (en Minute)
 	uint8_t PuissanceMax; //Puissance Maximum (En pourcentage)
 	uint8_t Pente; //Pente (en Minute)
+	uint8_t Fonctionement; // si différent de 0 prend la main sur le tableau (Valeur en % ou 1 = 0 2 =1 etc...)
 
 }Sortie;
 
@@ -31,4 +32,8 @@ void initHeure();
 
 void initSortie();
 
+void WriteTab(Sortie *t);
+
+void ReadTab(Sortie *t);
+
 #endif /* TAB_H_ */

Soft/STM32/Controle/Inc/adc.h

@@ -1,56 +1,26 @@
 /**
- ******************************************************************************
- * File Name          : ADC.h
- * Description        : This file provides code for the configuration
- *                      of the ADC instances.
- ******************************************************************************
- * This notice applies to any and all portions of this file
- * that are not between comment pairs USER CODE BEGIN and
- * USER CODE END. Other portions of this file, whether 
- * inserted by the user or by software development tools
- * are owned by their respective copyright owners.
- *
- * Copyright (c) 2019 STMicroelectronics International N.V. 
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without 
- * modification, are permitted, provided that the following conditions are met:
- *
- * 1. Redistribution of source code must retain the above copyright notice, 
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of other 
- *    contributors to this software may be used to endorse or promote products 
- *    derived from this software without specific written permission.
- * 4. This software, including modifications and/or derivative works of this 
- *    software, must execute solely and exclusively on microcontroller or
- *    microprocessor devices manufactured by or for STMicroelectronics.
- * 5. Redistribution and use of this software other than as permitted under 
- *    this license is void and will automatically terminate your rights under 
- *    this license. 
- *
- * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" 
- * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT 
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
- * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
- * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT 
- * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
- * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
+  ******************************************************************************
+  * File Name          : ADC.h
+  * Description        : This file provides code for the configuration
+  *                      of the ADC instances.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __adc_H
 #define __adc_H
 #ifdef __cplusplus
-extern "C" {
+ extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -78,11 +48,11 @@ void MX_ADC1_Init(void);
 #endif /*__ adc_H */
 
 /**
- * @}
- */
+  * @}
+  */
 
 /**
- * @}
- */
+  * @}
+  */
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Inc/gpio.h

@@ -4,45 +4,15 @@
   * Description        : This file contains all the functions prototypes for 
   *                      the gpio  
   ******************************************************************************
-  * This notice applies to any and all portions of this file
-  * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
-  * inserted by the user or by software development tools
-  * are owned by their respective copyright owners.
+  * @attention
   *
-  * Copyright (c) 2019 STMicroelectronics International N.V. 
-  * All rights reserved.
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without 
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice, 
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other 
-  *    contributors to this software may be used to endorse or promote products 
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this 
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under 
-  *    this license is void and will automatically terminate your rights under 
-  *    this license. 
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" 
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT 
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT 
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
   *
   ******************************************************************************
   */

Soft/STM32/Controle/Inc/i2c.h

@@ -4,45 +4,15 @@
   * Description        : This file provides code for the configuration
   *                      of the I2C instances.
   ******************************************************************************
-  * This notice applies to any and all portions of this file
-  * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
-  * inserted by the user or by software development tools
-  * are owned by their respective copyright owners.
+  * @attention
   *
-  * Copyright (c) 2019 STMicroelectronics International N.V. 
-  * All rights reserved.
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without 
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice, 
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other 
-  *    contributors to this software may be used to endorse or promote products 
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this 
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under 
-  *    this license is void and will automatically terminate your rights under 
-  *    this license. 
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" 
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT 
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT 
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
   *
   ******************************************************************************
   */

Soft/STM32/Controle/Inc/spi.h

@@ -4,45 +4,15 @@
   * Description        : This file provides code for the configuration
   *                      of the SPI instances.
   ******************************************************************************
-  * This notice applies to any and all portions of this file
-  * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
-  * inserted by the user or by software development tools
-  * are owned by their respective copyright owners.
+  * @attention
   *
-  * Copyright (c) 2019 STMicroelectronics International N.V. 
-  * All rights reserved.
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without 
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice, 
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other 
-  *    contributors to this software may be used to endorse or promote products 
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this 
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under 
-  *    this license is void and will automatically terminate your rights under 
-  *    this license. 
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" 
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT 
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT 
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
   *
   ******************************************************************************
   */

Soft/STM32/Controle/Inc/stm32f4xx_hal_conf.h

@@ -5,7 +5,7 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
+  * <h2><center>&copy; COPYRIGHT(c) 2020 STMicroelectronics</center></h2>
   *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
@@ -92,6 +92,7 @@
 /* #define HAL_LPTIM_MODULE_ENABLED   */
 /* #define HAL_EXTI_MODULE_ENABLED   */
 #define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
 #define HAL_DMA_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED

Soft/STM32/Controle/Inc/stm32f4xx_it.h

@@ -68,6 +68,7 @@ void MemManage_Handler(void);
 void BusFault_Handler(void);
 void UsageFault_Handler(void);
 void DebugMon_Handler(void);
+void SPI1_IRQHandler(void);
 void TIM5_IRQHandler(void);
 /* USER CODE BEGIN EFP */
 

Soft/STM32/Controle/Inc/tim.h

@@ -4,45 +4,15 @@
   * Description        : This file provides code for the configuration
   *                      of the TIM instances.
   ******************************************************************************
-  * This notice applies to any and all portions of this file
-  * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
-  * inserted by the user or by software development tools
-  * are owned by their respective copyright owners.
+  * @attention
   *
-  * Copyright (c) 2019 STMicroelectronics International N.V. 
-  * All rights reserved.
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without 
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice, 
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other 
-  *    contributors to this software may be used to endorse or promote products 
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this 
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under 
-  *    this license is void and will automatically terminate your rights under 
-  *    this license. 
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" 
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT 
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT 
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
   *
   ******************************************************************************
   */

Soft/STM32/Controle/Inc/usb_otg.h

@@ -4,45 +4,15 @@
   * Description        : This file provides code for the configuration
   *                      of the USB_OTG instances.
   ******************************************************************************
-  * This notice applies to any and all portions of this file
-  * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
-  * inserted by the user or by software development tools
-  * are owned by their respective copyright owners.
+  * @attention
   *
-  * Copyright (c) 2019 STMicroelectronics International N.V. 
-  * All rights reserved.
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without 
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice, 
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other 
-  *    contributors to this software may be used to endorse or promote products 
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this 
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under 
-  *    this license is void and will automatically terminate your rights under 
-  *    this license. 
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" 
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT 
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT 
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
   *
   ******************************************************************************
   */

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c

@@ -58,7 +58,7 @@
   * @file    cmsis_os.c
   * @author  MCD Application Team
   * @date    13-July-2017
-  * @brief   CMSIS-RTOS API implementation for FreeRTOS V9.0.0
+  * @brief   CMSIS-RTOS API implementation for FreeRTOS V10.0.1
   ******************************************************************************
   * @attention
   *

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/croutine.c

@@ -1,71 +1,29 @@
 /*
-    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
-
-    ***************************************************************************
-    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
-    >>!   distribute a combined work that includes FreeRTOS without being   !<<
-    >>!   obliged to provide the source code for proprietary components     !<<
-    >>!   outside of the FreeRTOS kernel.                                   !<<
-    ***************************************************************************
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
-    link: http://www.freertos.org/a00114.html
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that is more than just the market leader, it     *
-     *    is the industry's de facto standard.                               *
-     *                                                                       *
-     *    Help yourself get started quickly while simultaneously helping     *
-     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
-     *    tutorial book, reference manual, or both:                          *
-     *    http://www.FreeRTOS.org/Documentation                              *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
-    the FAQ page "My application does not run, what could be wrong?".  Have you
-    defined configASSERT()?
-
-    http://www.FreeRTOS.org/support - In return for receiving this top quality
-    embedded software for free we request you assist our global community by
-    participating in the support forum.
-
-    http://www.FreeRTOS.org/training - Investing in training allows your team to
-    be as productive as possible as early as possible.  Now you can receive
-    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
-    Ltd, and the world's leading authority on the world's leading RTOS.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
-    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
-    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and commercial middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
 
 #include "FreeRTOS.h"
 #include "task.h"

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c

@@ -1,71 +1,29 @@
 /*
-    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
-
-    ***************************************************************************
-    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
-    >>!   distribute a combined work that includes FreeRTOS without being   !<<
-    >>!   obliged to provide the source code for proprietary components     !<<
-    >>!   outside of the FreeRTOS kernel.                                   !<<
-    ***************************************************************************
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
-    link: http://www.freertos.org/a00114.html
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that is more than just the market leader, it     *
-     *    is the industry's de facto standard.                               *
-     *                                                                       *
-     *    Help yourself get started quickly while simultaneously helping     *
-     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
-     *    tutorial book, reference manual, or both:                          *
-     *    http://www.FreeRTOS.org/Documentation                              *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
-    the FAQ page "My application does not run, what could be wrong?".  Have you
-    defined configASSERT()?
-
-    http://www.FreeRTOS.org/support - In return for receiving this top quality
-    embedded software for free we request you assist our global community by
-    participating in the support forum.
-
-    http://www.FreeRTOS.org/training - Investing in training allows your team to
-    be as productive as possible as early as possible.  Now you can receive
-    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
-    Ltd, and the world's leading authority on the world's leading RTOS.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
-    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
-    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and commercial middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
 
 /* Standard includes. */
 #include <stdlib.h>
@@ -126,7 +84,7 @@ typedef struct xEventGroupDefinition
  * wait condition is met if any of the bits set in uxBitsToWait for are also set
  * in uxCurrentEventBits.
  */
-PRIVILEGED_FUNCTION static BaseType_t prvTestWaitCondition( const EventBits_t uxCurrentEventBits, const EventBits_t uxBitsToWaitFor, const BaseType_t xWaitForAllBits );
+static BaseType_t prvTestWaitCondition( const EventBits_t uxCurrentEventBits, const EventBits_t uxBitsToWaitFor, const BaseType_t xWaitForAllBits ) PRIVILEGED_FUNCTION;
 
 /*-----------------------------------------------------------*/
 
@@ -139,6 +97,16 @@ PRIVILEGED_FUNCTION static BaseType_t prvTestWaitCondition( const EventBits_t ux
 		/* A StaticEventGroup_t object must be provided. */
 		configASSERT( pxEventGroupBuffer );
 
+		#if( configASSERT_DEFINED == 1 )
+		{
+			/* Sanity check that the size of the structure used to declare a
+			variable of type StaticEventGroup_t equals the size of the real
+			event group structure. */
+			volatile size_t xSize = sizeof( StaticEventGroup_t );
+			configASSERT( xSize == sizeof( EventGroup_t ) );
+		}
+		#endif /* configASSERT_DEFINED */
+
 		/* The user has provided a statically allocated event group - use it. */
 		pxEventBits = ( EventGroup_t * ) pxEventGroupBuffer; /*lint !e740 EventGroup_t and StaticEventGroup_t are guaranteed to have the same size and alignment requirement - checked by configASSERT(). */
 
@@ -259,6 +227,7 @@ BaseType_t xTimeoutOccurred = pdFALSE;
 				/* The rendezvous bits were not set, but no block time was
 				specified - just return the current event bit value. */
 				uxReturn = pxEventBits->uxEventBits;
+				xTimeoutOccurred = pdTRUE;
 			}
 		}
 	}
@@ -317,6 +286,9 @@ BaseType_t xTimeoutOccurred = pdFALSE;
 
 	traceEVENT_GROUP_SYNC_END( xEventGroup, uxBitsToSet, uxBitsToWaitFor, xTimeoutOccurred );
 
+	/* Prevent compiler warnings when trace macros are not used. */
+	( void ) xTimeoutOccurred;
+
 	return uxReturn;
 }
 /*-----------------------------------------------------------*/
@@ -368,6 +340,7 @@ BaseType_t xTimeoutOccurred = pdFALSE;
 			/* The wait condition has not been met, but no block time was
 			specified, so just return the current value. */
 			uxReturn = uxCurrentEventBits;
+			xTimeoutOccurred = pdTRUE;
 		}
 		else
 		{
@@ -449,11 +422,9 @@ BaseType_t xTimeoutOccurred = pdFALSE;
 				{
 					mtCOVERAGE_TEST_MARKER();
 				}
+				xTimeoutOccurred = pdTRUE;
 			}
 			taskEXIT_CRITICAL();
-
-			/* Prevent compiler warnings when trace macros are not used. */
-			xTimeoutOccurred = pdFALSE;
 		}
 		else
 		{
@@ -465,6 +436,9 @@ BaseType_t xTimeoutOccurred = pdFALSE;
 	}
 	traceEVENT_GROUP_WAIT_BITS_END( xEventGroup, uxBitsToWaitFor, xTimeoutOccurred );
 
+	/* Prevent compiler warnings when trace macros are not used. */
+	( void ) xTimeoutOccurred;
+
 	return uxReturn;
 }
 /*-----------------------------------------------------------*/
@@ -602,7 +576,7 @@ BaseType_t xMatchFound = pdFALSE;
 				eventUNBLOCKED_DUE_TO_BIT_SET bit is set so the task knows
 				that is was unblocked due to its required bits matching, rather
 				than because it timed out. */
-				( void ) xTaskRemoveFromUnorderedEventList( pxListItem, pxEventBits->uxEventBits | eventUNBLOCKED_DUE_TO_BIT_SET );
+				vTaskRemoveFromUnorderedEventList( pxListItem, pxEventBits->uxEventBits | eventUNBLOCKED_DUE_TO_BIT_SET );
 			}
 
 			/* Move onto the next list item.  Note pxListItem->pxNext is not
@@ -633,9 +607,9 @@ const List_t *pxTasksWaitingForBits = &( pxEventBits->xTasksWaitingForBits );
 		while( listCURRENT_LIST_LENGTH( pxTasksWaitingForBits ) > ( UBaseType_t ) 0 )
 		{
 			/* Unblock the task, returning 0 as the event list is being deleted
-			and	cannot therefore have any bits set. */
-			configASSERT( pxTasksWaitingForBits->xListEnd.pxNext != ( ListItem_t * ) &( pxTasksWaitingForBits->xListEnd ) );
-			( void ) xTaskRemoveFromUnorderedEventList( pxTasksWaitingForBits->xListEnd.pxNext, eventUNBLOCKED_DUE_TO_BIT_SET );
+			and cannot therefore have any bits set. */
+			configASSERT( pxTasksWaitingForBits->xListEnd.pxNext != ( const ListItem_t * ) &( pxTasksWaitingForBits->xListEnd ) );
+			vTaskRemoveFromUnorderedEventList( pxTasksWaitingForBits->xListEnd.pxNext, eventUNBLOCKED_DUE_TO_BIT_SET );
 		}
 
 		#if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 0 ) )
@@ -748,5 +722,17 @@ BaseType_t xWaitConditionMet = pdFALSE;
 		return xReturn;
 	}
 
-#endif
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	void vEventGroupSetNumber( void * xEventGroup, UBaseType_t uxEventGroupNumber )
+	{
+		( ( EventGroup_t * ) xEventGroup )->uxEventGroupNumber = uxEventGroupNumber;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
 

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOS.h

@@ -1,71 +1,29 @@
 /*
-    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
-
-    ***************************************************************************
-    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
-    >>!   distribute a combined work that includes FreeRTOS without being   !<<
-    >>!   obliged to provide the source code for proprietary components     !<<
-    >>!   outside of the FreeRTOS kernel.                                   !<<
-    ***************************************************************************
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
-    link: http://www.freertos.org/a00114.html
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that is more than just the market leader, it     *
-     *    is the industry's de facto standard.                               *
-     *                                                                       *
-     *    Help yourself get started quickly while simultaneously helping     *
-     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
-     *    tutorial book, reference manual, or both:                          *
-     *    http://www.FreeRTOS.org/Documentation                              *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
-    the FAQ page "My application does not run, what could be wrong?".  Have you
-    defined configASSERT()?
-
-    http://www.FreeRTOS.org/support - In return for receiving this top quality
-    embedded software for free we request you assist our global community by
-    participating in the support forum.
-
-    http://www.FreeRTOS.org/training - Investing in training allows your team to
-    be as productive as possible as early as possible.  Now you can receive
-    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
-    Ltd, and the world's leading authority on the world's leading RTOS.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
-    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
-    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and commercial middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
 
 #ifndef INC_FREERTOS_H
 #define INC_FREERTOS_H
@@ -126,6 +84,10 @@ extern "C" {
 	#error Missing definition:  configMAX_PRIORITIES must be defined in FreeRTOSConfig.h.  See the Configuration section of the FreeRTOS API documentation for details.
 #endif
 
+#if configMAX_PRIORITIES < 1
+	#error configMAX_PRIORITIES must be defined to be greater than or equal to 1.
+#endif
+
 #ifndef configUSE_PREEMPTION
 	#error Missing definition:  configUSE_PREEMPTION must be defined in FreeRTOSConfig.h as either 1 or 0.  See the Configuration section of the FreeRTOS API documentation for details.
 #endif
@@ -142,10 +104,6 @@ extern "C" {
 	#error Missing definition:  configUSE_16_BIT_TICKS must be defined in FreeRTOSConfig.h as either 1 or 0.  See the Configuration section of the FreeRTOS API documentation for details.
 #endif
 
-#ifndef configMAX_PRIORITIES
-	#error configMAX_PRIORITIES must be defined to be greater than or equal to 1.
-#endif
-
 #ifndef configUSE_CO_ROUTINES
 	#define configUSE_CO_ROUTINES 0
 #endif
@@ -396,6 +354,14 @@ extern "C" {
 	#define traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue )
 #endif
 
+#ifndef traceBLOCKING_ON_QUEUE_PEEK
+	/* Task is about to block because it cannot read from a
+	queue/mutex/semaphore.  pxQueue is a pointer to the queue/mutex/semaphore
+	upon which the read was attempted.  pxCurrentTCB points to the TCB of the
+	task that attempted the read. */
+	#define traceBLOCKING_ON_QUEUE_PEEK( pxQueue )
+#endif
+
 #ifndef traceBLOCKING_ON_QUEUE_SEND
 	/* Task is about to block because it cannot write to a
 	queue/mutex/semaphore.  pxQueue is a pointer to the queue/mutex/semaphore
@@ -408,6 +374,14 @@ extern "C" {
 	#define configCHECK_FOR_STACK_OVERFLOW 0
 #endif
 
+#ifndef configRECORD_STACK_HIGH_ADDRESS
+	#define configRECORD_STACK_HIGH_ADDRESS 0
+#endif
+
+#ifndef configINCLUDE_FREERTOS_TASK_C_ADDITIONS_H
+	#define configINCLUDE_FREERTOS_TASK_C_ADDITIONS_H 0
+#endif
+
 /* The following event macros are embedded in the kernel API calls. */
 
 #ifndef traceMOVED_TASK_TO_READY_STATE
@@ -474,6 +448,10 @@ extern "C" {
 	#define traceQUEUE_PEEK( pxQueue )
 #endif
 
+#ifndef traceQUEUE_PEEK_FAILED
+	#define traceQUEUE_PEEK_FAILED( pxQueue )
+#endif
+
 #ifndef traceQUEUE_PEEK_FROM_ISR
 	#define traceQUEUE_PEEK_FROM_ISR( pxQueue )
 #endif
@@ -658,6 +636,58 @@ extern "C" {
 	#define traceTASK_NOTIFY_GIVE_FROM_ISR()
 #endif
 
+#ifndef traceSTREAM_BUFFER_CREATE_FAILED
+	#define traceSTREAM_BUFFER_CREATE_FAILED( xIsMessageBuffer )
+#endif
+
+#ifndef traceSTREAM_BUFFER_CREATE_STATIC_FAILED
+	#define traceSTREAM_BUFFER_CREATE_STATIC_FAILED( xReturn, xIsMessageBuffer )
+#endif
+
+#ifndef traceSTREAM_BUFFER_CREATE
+	#define traceSTREAM_BUFFER_CREATE( pxStreamBuffer, xIsMessageBuffer )
+#endif
+
+#ifndef traceSTREAM_BUFFER_DELETE
+	#define traceSTREAM_BUFFER_DELETE( xStreamBuffer )
+#endif
+
+#ifndef traceSTREAM_BUFFER_RESET
+	#define traceSTREAM_BUFFER_RESET( xStreamBuffer )
+#endif
+
+#ifndef traceBLOCKING_ON_STREAM_BUFFER_SEND
+	#define traceBLOCKING_ON_STREAM_BUFFER_SEND( xStreamBuffer )
+#endif
+
+#ifndef traceSTREAM_BUFFER_SEND
+	#define traceSTREAM_BUFFER_SEND( xStreamBuffer, xBytesSent )
+#endif
+
+#ifndef traceSTREAM_BUFFER_SEND_FAILED
+	#define traceSTREAM_BUFFER_SEND_FAILED( xStreamBuffer )
+#endif
+
+#ifndef traceSTREAM_BUFFER_SEND_FROM_ISR
+	#define traceSTREAM_BUFFER_SEND_FROM_ISR( xStreamBuffer, xBytesSent )
+#endif
+
+#ifndef traceBLOCKING_ON_STREAM_BUFFER_RECEIVE
+	#define traceBLOCKING_ON_STREAM_BUFFER_RECEIVE( xStreamBuffer )
+#endif
+
+#ifndef traceSTREAM_BUFFER_RECEIVE
+	#define traceSTREAM_BUFFER_RECEIVE( xStreamBuffer, xReceivedLength )
+#endif
+
+#ifndef traceSTREAM_BUFFER_RECEIVE_FAILED
+	#define traceSTREAM_BUFFER_RECEIVE_FAILED( xStreamBuffer )
+#endif
+
+#ifndef traceSTREAM_BUFFER_RECEIVE_FROM_ISR
+	#define traceSTREAM_BUFFER_RECEIVE_FROM_ISR( xStreamBuffer, xReceivedLength )
+#endif
+
 #ifndef configGENERATE_RUN_TIME_STATS
 	#define configGENERATE_RUN_TIME_STATS 0
 #endif
@@ -708,6 +738,10 @@ extern "C" {
 	#define configUSE_TICKLESS_IDLE 0
 #endif
 
+#ifndef configPRE_SUPPRESS_TICKS_AND_SLEEP_PROCESSING
+	#define configPRE_SUPPRESS_TICKS_AND_SLEEP_PROCESSING( x )
+#endif
+
 #ifndef configPRE_SLEEP_PROCESSING
 	#define configPRE_SLEEP_PROCESSING( x )
 #endif
@@ -724,6 +758,10 @@ extern "C" {
 	#define portTASK_USES_FLOATING_POINT()
 #endif
 
+#ifndef portTASK_CALLS_SECURE_FUNCTIONS
+	#define portTASK_CALLS_SECURE_FUNCTIONS()
+#endif
+
 #ifndef configUSE_TIME_SLICING
 	#define configUSE_TIME_SLICING 1
 #endif
@@ -782,6 +820,12 @@ extern "C" {
 	#define configSUPPORT_DYNAMIC_ALLOCATION 1
 #endif
 
+#ifndef configSTACK_DEPTH_TYPE
+	/* Defaults to uint16_t for backward compatibility, but can be overridden
+	in FreeRTOSConfig.h if uint16_t is too restrictive. */
+	#define configSTACK_DEPTH_TYPE uint16_t
+#endif
+
 /* Sanity check the configuration. */
 #if( configUSE_TICKLESS_IDLE != 0 )
 	#if( INCLUDE_vTaskSuspend != 1 )
@@ -797,6 +841,10 @@ extern "C" {
 	#error configUSE_MUTEXES must be set to 1 to use recursive mutexes
 #endif
 
+#ifndef configINITIAL_TICK_COUNT
+	#define configINITIAL_TICK_COUNT 0
+#endif
+
 #if( portTICK_TYPE_IS_ATOMIC == 0 )
 	/* Either variables of tick type cannot be read atomically, or
 	portTICK_TYPE_IS_ATOMIC was not set - map the critical sections used when
@@ -820,6 +868,32 @@ V8 if desired. */
 	#define configENABLE_BACKWARD_COMPATIBILITY 1
 #endif
 
+#ifndef configPRINTF
+	/* configPRINTF() was not defined, so define it away to nothing.  To use
+	configPRINTF() then define it as follows (where MyPrintFunction() is
+	provided by the application writer):
+
+	void MyPrintFunction(const char *pcFormat, ... );
+	#define configPRINTF( X )   MyPrintFunction X
+
+	Then call like a standard printf() function, but placing brackets around
+	all parameters so they are passed as a single parameter.  For example:
+	configPRINTF( ("Value = %d", MyVariable) ); */
+	#define configPRINTF( X )
+#endif
+
+#ifndef configMAX
+	/* The application writer has not provided their own MAX macro, so define
+	the following generic implementation. */
+	#define configMAX( a, b ) ( ( ( a ) > ( b ) ) ? ( a ) : ( b ) )
+#endif
+
+#ifndef configMIN
+	/* The application writer has not provided their own MAX macro, so define
+	the following generic implementation. */
+	#define configMIN( a, b ) ( ( ( a ) < ( b ) ) ? ( a ) : ( b ) )
+#endif
+
 #if configENABLE_BACKWARD_COMPATIBILITY == 1
 	#define eTaskStateGet eTaskGetState
 	#define portTickType TickType_t
@@ -917,7 +991,7 @@ typedef struct xSTATIC_TCB
 	UBaseType_t			uxDummy5;
 	void				*pxDummy6;
 	uint8_t				ucDummy7[ configMAX_TASK_NAME_LEN ];
-	#if ( portSTACK_GROWTH > 0 )
+	#if ( ( portSTACK_GROWTH > 0 ) || ( configRECORD_STACK_HIGH_ADDRESS == 1 ) )
 		void			*pxDummy8;
 	#endif
 	#if ( portCRITICAL_NESTING_IN_TCB == 1 )
@@ -945,10 +1019,14 @@ typedef struct xSTATIC_TCB
 		uint32_t 		ulDummy18;
 		uint8_t 		ucDummy19;
 	#endif
-	#if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+	#if( ( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) || ( portUSING_MPU_WRAPPERS == 1 ) )
 		uint8_t			uxDummy20;
 	#endif
 
+	#if( INCLUDE_xTaskAbortDelay == 1 )
+		uint8_t ucDummy21;
+	#endif
+
 } StaticTask_t;
 
 /*
@@ -1055,6 +1133,33 @@ typedef struct xSTATIC_TIMER
 
 } StaticTimer_t;
 
+/*
+* In line with software engineering best practice, especially when supplying a
+* library that is likely to change in future versions, FreeRTOS implements a
+* strict data hiding policy.  This means the stream buffer structure used
+* internally by FreeRTOS is not accessible to application code.  However, if
+* the application writer wants to statically allocate the memory required to
+* create a stream buffer then the size of the stream buffer object needs to be
+* know.  The StaticStreamBuffer_t structure below is provided for this purpose.
+* Its size and alignment requirements are guaranteed to match those of the
+* genuine structure, no matter which architecture is being used, and no matter
+* how the values in FreeRTOSConfig.h are set.  Its contents are somewhat
+* obfuscated in the hope users will recognise that it would be unwise to make
+* direct use of the structure members.
+*/
+typedef struct xSTATIC_STREAM_BUFFER
+{
+	size_t uxDummy1[ 4 ];
+	void * pvDummy2[ 3 ];
+	uint8_t ucDummy3;
+	#if ( configUSE_TRACE_FACILITY == 1 )
+		UBaseType_t uxDummy4;
+	#endif
+} StaticStreamBuffer_t;
+
+/* Message buffers are built on stream buffers. */
+typedef StaticStreamBuffer_t StaticMessageBuffer_t;
+
 #ifdef __cplusplus
 }
 #endif

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/include/StackMacros.h

@@ -1,75 +1,37 @@
 /*
-    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
-
-    ***************************************************************************
-    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
-    >>!   distribute a combined work that includes FreeRTOS without being   !<<
-    >>!   obliged to provide the source code for proprietary components     !<<
-    >>!   outside of the FreeRTOS kernel.                                   !<<
-    ***************************************************************************
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
-    link: http://www.freertos.org/a00114.html
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that is more than just the market leader, it     *
-     *    is the industry's de facto standard.                               *
-     *                                                                       *
-     *    Help yourself get started quickly while simultaneously helping     *
-     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
-     *    tutorial book, reference manual, or both:                          *
-     *    http://www.FreeRTOS.org/Documentation                              *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
-    the FAQ page "My application does not run, what could be wrong?".  Have you
-    defined configASSERT()?
-
-    http://www.FreeRTOS.org/support - In return for receiving this top quality
-    embedded software for free we request you assist our global community by
-    participating in the support forum.
-
-    http://www.FreeRTOS.org/training - Investing in training allows your team to
-    be as productive as possible as early as possible.  Now you can receive
-    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
-    Ltd, and the world's leading authority on the world's leading RTOS.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
-    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
-    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and commercial middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
 
 #ifndef STACK_MACROS_H
 #define STACK_MACROS_H
 
+#ifndef _MSC_VER /* Visual Studio doesn't support #warning. */
+	#warning The name of this file has changed to stack_macros.h.  Please update your code accordingly.  This source file (which has the original name) will be removed in future released.
+#endif
+
 /*
  * Call the stack overflow hook function if the stack of the task being swapped
  * out is currently overflowed, or looks like it might have overflowed in the

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/include/croutine.h

@@ -1,71 +1,29 @@
 /*
-    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
-
-    ***************************************************************************
-    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
-    >>!   distribute a combined work that includes FreeRTOS without being   !<<
-    >>!   obliged to provide the source code for proprietary components     !<<
-    >>!   outside of the FreeRTOS kernel.                                   !<<
-    ***************************************************************************
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
-    link: http://www.freertos.org/a00114.html
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that is more than just the market leader, it     *
-     *    is the industry's de facto standard.                               *
-     *                                                                       *
-     *    Help yourself get started quickly while simultaneously helping     *
-     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
-     *    tutorial book, reference manual, or both:                          *
-     *    http://www.FreeRTOS.org/Documentation                              *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
-    the FAQ page "My application does not run, what could be wrong?".  Have you
-    defined configASSERT()?
-
-    http://www.FreeRTOS.org/support - In return for receiving this top quality
-    embedded software for free we request you assist our global community by
-    participating in the support forum.
-
-    http://www.FreeRTOS.org/training - Investing in training allows your team to
-    be as productive as possible as early as possible.  Now you can receive
-    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
-    Ltd, and the world's leading authority on the world's leading RTOS.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
-    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
-    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and commercial middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
 
 #ifndef CO_ROUTINE_H
 #define CO_ROUTINE_H

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/include/deprecated_definitions.h

@@ -1,318 +1,278 @@
 /*
- FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
- All rights reserved
-
- VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
- This file is part of the FreeRTOS distribution.
-
- FreeRTOS is free software; you can redistribute it and/or modify it under
- the terms of the GNU General Public License (version 2) as published by the
- Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
-
- ***************************************************************************
- >>!   NOTE: The modification to the GPL is included to allow you to     !<<
- >>!   distribute a combined work that includes FreeRTOS without being   !<<
- >>!   obliged to provide the source code for proprietary components     !<<
- >>!   outside of the FreeRTOS kernel.                                   !<<
- ***************************************************************************
-
- FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
- WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- FOR A PARTICULAR PURPOSE.  Full license text is available on the following
- link: http://www.freertos.org/a00114.html
-
- ***************************************************************************
- *                                                                       *
- *    FreeRTOS provides completely free yet professionally developed,    *
- *    robust, strictly quality controlled, supported, and cross          *
- *    platform software that is more than just the market leader, it     *
- *    is the industry's de facto standard.                               *
- *                                                                       *
- *    Help yourself get started quickly while simultaneously helping     *
- *    to support the FreeRTOS project by purchasing a FreeRTOS           *
- *    tutorial book, reference manual, or both:                          *
- *    http://www.FreeRTOS.org/Documentation                              *
- *                                                                       *
- ***************************************************************************
-
- http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
- the FAQ page "My application does not run, what could be wrong?".  Have you
- defined configASSERT()?
-
- http://www.FreeRTOS.org/support - In return for receiving this top quality
- embedded software for free we request you assist our global community by
- participating in the support forum.
-
- http://www.FreeRTOS.org/training - Investing in training allows your team to
- be as productive as possible as early as possible.  Now you can receive
- FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
- Ltd, and the world's leading authority on the world's leading RTOS.
-
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
- including FreeRTOS+Trace - an indispensable productivity tool, a DOS
- compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
- http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
- Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
-
- http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
- Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
- licenses offer ticketed support, indemnification and commercial middleware.
-
- http://www.SafeRTOS.com - High Integrity Systems also provide a safety
- engineered and independently SIL3 certified version for use in safety and
- mission critical applications that require provable dependability.
-
- 1 tab == 4 spaces!
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
  */
 
 #ifndef DEPRECATED_DEFINITIONS_H
 #define DEPRECATED_DEFINITIONS_H
 
+
 /* Each FreeRTOS port has a unique portmacro.h header file.  Originally a
- pre-processor definition was used to ensure the pre-processor found the correct
- portmacro.h file for the port being used.  That scheme was deprecated in favour
- of setting the compiler's include path such that it found the correct
- portmacro.h file - removing the need for the constant and allowing the
- portmacro.h file to be located anywhere in relation to the port being used.  The
- definitions below remain in the code for backward compatibility only.  New
- projects should not use them. */
+pre-processor definition was used to ensure the pre-processor found the correct
+portmacro.h file for the port being used.  That scheme was deprecated in favour
+of setting the compiler's include path such that it found the correct
+portmacro.h file - removing the need for the constant and allowing the
+portmacro.h file to be located anywhere in relation to the port being used.  The
+definitions below remain in the code for backward compatibility only.  New
+projects should not use them. */
 
 #ifdef OPEN_WATCOM_INDUSTRIAL_PC_PORT
-#include "..\..\Source\portable\owatcom\16bitdos\pc\portmacro.h"
-typedef void ( __interrupt __far *pxISR )();
+	#include "..\..\Source\portable\owatcom\16bitdos\pc\portmacro.h"
+	typedef void ( __interrupt __far *pxISR )();
 #endif
 
 #ifdef OPEN_WATCOM_FLASH_LITE_186_PORT
-#include "..\..\Source\portable\owatcom\16bitdos\flsh186\portmacro.h"
-typedef void ( __interrupt __far *pxISR )();
+	#include "..\..\Source\portable\owatcom\16bitdos\flsh186\portmacro.h"
+	typedef void ( __interrupt __far *pxISR )();
 #endif
 
 #ifdef GCC_MEGA_AVR
-#include "../portable/GCC/ATMega323/portmacro.h"
+	#include "../portable/GCC/ATMega323/portmacro.h"
 #endif
 
 #ifdef IAR_MEGA_AVR
-#include "../portable/IAR/ATMega323/portmacro.h"
+	#include "../portable/IAR/ATMega323/portmacro.h"
 #endif
 
 #ifdef MPLAB_PIC24_PORT
-#include "../../Source/portable/MPLAB/PIC24_dsPIC/portmacro.h"
+	#include "../../Source/portable/MPLAB/PIC24_dsPIC/portmacro.h"
 #endif
 
 #ifdef MPLAB_DSPIC_PORT
-#include "../../Source/portable/MPLAB/PIC24_dsPIC/portmacro.h"
+	#include "../../Source/portable/MPLAB/PIC24_dsPIC/portmacro.h"
 #endif
 
 #ifdef MPLAB_PIC18F_PORT
-#include "../../Source/portable/MPLAB/PIC18F/portmacro.h"
+	#include "../../Source/portable/MPLAB/PIC18F/portmacro.h"
 #endif
 
 #ifdef MPLAB_PIC32MX_PORT
-#include "../../Source/portable/MPLAB/PIC32MX/portmacro.h"
+	#include "../../Source/portable/MPLAB/PIC32MX/portmacro.h"
 #endif
 
 #ifdef _FEDPICC
-#include "libFreeRTOS/Include/portmacro.h"
+	#include "libFreeRTOS/Include/portmacro.h"
 #endif
 
 #ifdef SDCC_CYGNAL
-#include "../../Source/portable/SDCC/Cygnal/portmacro.h"
+	#include "../../Source/portable/SDCC/Cygnal/portmacro.h"
 #endif
 
 #ifdef GCC_ARM7
-#include "../../Source/portable/GCC/ARM7_LPC2000/portmacro.h"
+	#include "../../Source/portable/GCC/ARM7_LPC2000/portmacro.h"
 #endif
 
 #ifdef GCC_ARM7_ECLIPSE
-#include "portmacro.h"
+	#include "portmacro.h"
 #endif
 
 #ifdef ROWLEY_LPC23xx
-#include "../../Source/portable/GCC/ARM7_LPC23xx/portmacro.h"
+	#include "../../Source/portable/GCC/ARM7_LPC23xx/portmacro.h"
 #endif
 
 #ifdef IAR_MSP430
-#include "..\..\Source\portable\IAR\MSP430\portmacro.h"
+	#include "..\..\Source\portable\IAR\MSP430\portmacro.h"
 #endif
 
 #ifdef GCC_MSP430
-#include "../../Source/portable/GCC/MSP430F449/portmacro.h"
+	#include "../../Source/portable/GCC/MSP430F449/portmacro.h"
 #endif
 
 #ifdef ROWLEY_MSP430
-#include "../../Source/portable/Rowley/MSP430F449/portmacro.h"
+	#include "../../Source/portable/Rowley/MSP430F449/portmacro.h"
 #endif
 
 #ifdef ARM7_LPC21xx_KEIL_RVDS
-#include "..\..\Source\portable\RVDS\ARM7_LPC21xx\portmacro.h"
+	#include "..\..\Source\portable\RVDS\ARM7_LPC21xx\portmacro.h"
 #endif
 
 #ifdef SAM7_GCC
-#include "../../Source/portable/GCC/ARM7_AT91SAM7S/portmacro.h"
+	#include "../../Source/portable/GCC/ARM7_AT91SAM7S/portmacro.h"
 #endif
 
 #ifdef SAM7_IAR
-#include "..\..\Source\portable\IAR\AtmelSAM7S64\portmacro.h"
+	#include "..\..\Source\portable\IAR\AtmelSAM7S64\portmacro.h"
 #endif
 
 #ifdef SAM9XE_IAR
-#include "..\..\Source\portable\IAR\AtmelSAM9XE\portmacro.h"
+	#include "..\..\Source\portable\IAR\AtmelSAM9XE\portmacro.h"
 #endif
 
 #ifdef LPC2000_IAR
-#include "..\..\Source\portable\IAR\LPC2000\portmacro.h"
+	#include "..\..\Source\portable\IAR\LPC2000\portmacro.h"
 #endif
 
 #ifdef STR71X_IAR
-#include "..\..\Source\portable\IAR\STR71x\portmacro.h"
+	#include "..\..\Source\portable\IAR\STR71x\portmacro.h"
 #endif
 
 #ifdef STR75X_IAR
-#include "..\..\Source\portable\IAR\STR75x\portmacro.h"
+	#include "..\..\Source\portable\IAR\STR75x\portmacro.h"
 #endif
 
 #ifdef STR75X_GCC
-#include "..\..\Source\portable\GCC\STR75x\portmacro.h"
+	#include "..\..\Source\portable\GCC\STR75x\portmacro.h"
 #endif
 
 #ifdef STR91X_IAR
-#include "..\..\Source\portable\IAR\STR91x\portmacro.h"
+	#include "..\..\Source\portable\IAR\STR91x\portmacro.h"
 #endif
 
 #ifdef GCC_H8S
-#include "../../Source/portable/GCC/H8S2329/portmacro.h"
+	#include "../../Source/portable/GCC/H8S2329/portmacro.h"
 #endif
 
 #ifdef GCC_AT91FR40008
-#include "../../Source/portable/GCC/ARM7_AT91FR40008/portmacro.h"
+	#include "../../Source/portable/GCC/ARM7_AT91FR40008/portmacro.h"
 #endif
 
 #ifdef RVDS_ARMCM3_LM3S102
-#include "../../Source/portable/RVDS/ARM_CM3/portmacro.h"
+	#include "../../Source/portable/RVDS/ARM_CM3/portmacro.h"
 #endif
 
 #ifdef GCC_ARMCM3_LM3S102
-#include "../../Source/portable/GCC/ARM_CM3/portmacro.h"
+	#include "../../Source/portable/GCC/ARM_CM3/portmacro.h"
 #endif
 
 #ifdef GCC_ARMCM3
-#include "../../Source/portable/GCC/ARM_CM3/portmacro.h"
+	#include "../../Source/portable/GCC/ARM_CM3/portmacro.h"
 #endif
 
 #ifdef IAR_ARM_CM3
-#include "../../Source/portable/IAR/ARM_CM3/portmacro.h"
+	#include "../../Source/portable/IAR/ARM_CM3/portmacro.h"
 #endif
 
 #ifdef IAR_ARMCM3_LM
-#include "../../Source/portable/IAR/ARM_CM3/portmacro.h"
+	#include "../../Source/portable/IAR/ARM_CM3/portmacro.h"
 #endif
 
 #ifdef HCS12_CODE_WARRIOR
-#include "../../Source/portable/CodeWarrior/HCS12/portmacro.h"
+	#include "../../Source/portable/CodeWarrior/HCS12/portmacro.h"
 #endif
 
 #ifdef MICROBLAZE_GCC
-#include "../../Source/portable/GCC/MicroBlaze/portmacro.h"
+	#include "../../Source/portable/GCC/MicroBlaze/portmacro.h"
 #endif
 
 #ifdef TERN_EE
-#include "..\..\Source\portable\Paradigm\Tern_EE\small\portmacro.h"
+	#include "..\..\Source\portable\Paradigm\Tern_EE\small\portmacro.h"
 #endif
 
 #ifdef GCC_HCS12
-#include "../../Source/portable/GCC/HCS12/portmacro.h"
+	#include "../../Source/portable/GCC/HCS12/portmacro.h"
 #endif
 
 #ifdef GCC_MCF5235
-#include "../../Source/portable/GCC/MCF5235/portmacro.h"
+    #include "../../Source/portable/GCC/MCF5235/portmacro.h"
 #endif
 
 #ifdef COLDFIRE_V2_GCC
-#include "../../../Source/portable/GCC/ColdFire_V2/portmacro.h"
+	#include "../../../Source/portable/GCC/ColdFire_V2/portmacro.h"
 #endif
 
 #ifdef COLDFIRE_V2_CODEWARRIOR
-#include "../../Source/portable/CodeWarrior/ColdFire_V2/portmacro.h"
+	#include "../../Source/portable/CodeWarrior/ColdFire_V2/portmacro.h"
 #endif
 
 #ifdef GCC_PPC405
-#include "../../Source/portable/GCC/PPC405_Xilinx/portmacro.h"
+	#include "../../Source/portable/GCC/PPC405_Xilinx/portmacro.h"
 #endif
 
 #ifdef GCC_PPC440
-#include "../../Source/portable/GCC/PPC440_Xilinx/portmacro.h"
+	#include "../../Source/portable/GCC/PPC440_Xilinx/portmacro.h"
 #endif
 
 #ifdef _16FX_SOFTUNE
-#include "..\..\Source\portable\Softune\MB96340\portmacro.h"
+	#include "..\..\Source\portable\Softune\MB96340\portmacro.h"
 #endif
 
 #ifdef BCC_INDUSTRIAL_PC_PORT
-/* A short file name has to be used in place of the normal
- FreeRTOSConfig.h when using the Borland compiler. */
-#include "frconfig.h"
-#include "..\portable\BCC\16BitDOS\PC\prtmacro.h"
-typedef void ( __interrupt __far *pxISR )();
+	/* A short file name has to be used in place of the normal
+	FreeRTOSConfig.h when using the Borland compiler. */
+	#include "frconfig.h"
+	#include "..\portable\BCC\16BitDOS\PC\prtmacro.h"
+    typedef void ( __interrupt __far *pxISR )();
 #endif
 
 #ifdef BCC_FLASH_LITE_186_PORT
-/* A short file name has to be used in place of the normal
- FreeRTOSConfig.h when using the Borland compiler. */
-#include "frconfig.h"
-#include "..\portable\BCC\16BitDOS\flsh186\prtmacro.h"
-typedef void ( __interrupt __far *pxISR )();
+	/* A short file name has to be used in place of the normal
+	FreeRTOSConfig.h when using the Borland compiler. */
+	#include "frconfig.h"
+	#include "..\portable\BCC\16BitDOS\flsh186\prtmacro.h"
+    typedef void ( __interrupt __far *pxISR )();
 #endif
 
 #ifdef __GNUC__
-#ifdef __AVR32_AVR32A__
-#include "portmacro.h"
-#endif
+   #ifdef __AVR32_AVR32A__
+	   #include "portmacro.h"
+   #endif
 #endif
 
 #ifdef __ICCAVR32__
-#ifdef __CORE__
-#if __CORE__ == __AVR32A__
-#include "portmacro.h"
-#endif
-#endif
+   #ifdef __CORE__
+      #if __CORE__ == __AVR32A__
+	      #include "portmacro.h"
+      #endif
+   #endif
 #endif
 
 #ifdef __91467D
-#include "portmacro.h"
+	#include "portmacro.h"
 #endif
 
 #ifdef __96340
-#include "portmacro.h"
+	#include "portmacro.h"
 #endif
 
+
 #ifdef __IAR_V850ES_Fx3__
-#include "../../Source/portable/IAR/V850ES/portmacro.h"
+	#include "../../Source/portable/IAR/V850ES/portmacro.h"
 #endif
 
 #ifdef __IAR_V850ES_Jx3__
-#include "../../Source/portable/IAR/V850ES/portmacro.h"
+	#include "../../Source/portable/IAR/V850ES/portmacro.h"
 #endif
 
 #ifdef __IAR_V850ES_Jx3_L__
-#include "../../Source/portable/IAR/V850ES/portmacro.h"
+	#include "../../Source/portable/IAR/V850ES/portmacro.h"
 #endif
 
 #ifdef __IAR_V850ES_Jx2__
-#include "../../Source/portable/IAR/V850ES/portmacro.h"
+	#include "../../Source/portable/IAR/V850ES/portmacro.h"
 #endif
 
 #ifdef __IAR_V850ES_Hx2__
-#include "../../Source/portable/IAR/V850ES/portmacro.h"
+	#include "../../Source/portable/IAR/V850ES/portmacro.h"
 #endif
 
 #ifdef __IAR_78K0R_Kx3__
-#include "../../Source/portable/IAR/78K0R/portmacro.h"
+	#include "../../Source/portable/IAR/78K0R/portmacro.h"
 #endif
 
 #ifdef __IAR_78K0R_Kx3L__
-#include "../../Source/portable/IAR/78K0R/portmacro.h"
+	#include "../../Source/portable/IAR/78K0R/portmacro.h"
 #endif
 
 #endif /* DEPRECATED_DEFINITIONS_H */

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/include/event_groups.h

@@ -1,71 +1,29 @@
 /*
-    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
-
-    ***************************************************************************
-    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
-    >>!   distribute a combined work that includes FreeRTOS without being   !<<
-    >>!   obliged to provide the source code for proprietary components     !<<
-    >>!   outside of the FreeRTOS kernel.                                   !<<
-    ***************************************************************************
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
-    link: http://www.freertos.org/a00114.html
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that is more than just the market leader, it     *
-     *    is the industry's de facto standard.                               *
-     *                                                                       *
-     *    Help yourself get started quickly while simultaneously helping     *
-     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
-     *    tutorial book, reference manual, or both:                          *
-     *    http://www.FreeRTOS.org/Documentation                              *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
-    the FAQ page "My application does not run, what could be wrong?".  Have you
-    defined configASSERT()?
-
-    http://www.FreeRTOS.org/support - In return for receiving this top quality
-    embedded software for free we request you assist our global community by
-    participating in the support forum.
-
-    http://www.FreeRTOS.org/training - Investing in training allows your team to
-    be as productive as possible as early as possible.  Now you can receive
-    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
-    Ltd, and the world's leading authority on the world's leading RTOS.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
-    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
-    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and commercial middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
 
 #ifndef EVENT_GROUPS_H
 #define EVENT_GROUPS_H
@@ -185,7 +143,7 @@ typedef TickType_t EventBits_t;
  * \ingroup EventGroup
  */
 #if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
-PRIVILEGED_FUNCTION EventGroupHandle_t xEventGroupCreate( void ) ;
+	EventGroupHandle_t xEventGroupCreate( void ) PRIVILEGED_FUNCTION;
 #endif
 
 /**
@@ -238,7 +196,7 @@ PRIVILEGED_FUNCTION EventGroupHandle_t xEventGroupCreate( void ) ;
    </pre>
  */
 #if( configSUPPORT_STATIC_ALLOCATION == 1 )
-PRIVILEGED_FUNCTION EventGroupHandle_t xEventGroupCreateStatic( StaticEventGroup_t *pxEventGroupBuffer );
+	EventGroupHandle_t xEventGroupCreateStatic( StaticEventGroup_t *pxEventGroupBuffer ) PRIVILEGED_FUNCTION;
 #endif
 
 /**
@@ -333,7 +291,7 @@ PRIVILEGED_FUNCTION EventGroupHandle_t xEventGroupCreateStatic( StaticEventGroup
  * \defgroup xEventGroupWaitBits xEventGroupWaitBits
  * \ingroup EventGroup
  */
-PRIVILEGED_FUNCTION EventBits_t xEventGroupWaitBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToWaitFor, const BaseType_t xClearOnExit, const BaseType_t xWaitForAllBits, TickType_t xTicksToWait );
+EventBits_t xEventGroupWaitBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToWaitFor, const BaseType_t xClearOnExit, const BaseType_t xWaitForAllBits, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
 
 /**
  * event_groups.h
@@ -390,7 +348,7 @@ PRIVILEGED_FUNCTION EventBits_t xEventGroupWaitBits( EventGroupHandle_t xEventGr
  * \defgroup xEventGroupClearBits xEventGroupClearBits
  * \ingroup EventGroup
  */
-PRIVILEGED_FUNCTION EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear );
+EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear ) PRIVILEGED_FUNCTION;
 
 /**
  * event_groups.h
@@ -446,7 +404,7 @@ PRIVILEGED_FUNCTION EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventG
  * \ingroup EventGroup
  */
 #if( configUSE_TRACE_FACILITY == 1 )
-	PRIVILEGED_FUNCTION BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet );
+	BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet ) PRIVILEGED_FUNCTION;
 #else
 	#define xEventGroupClearBitsFromISR( xEventGroup, uxBitsToClear ) xTimerPendFunctionCallFromISR( vEventGroupClearBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToClear, NULL )
 #endif
@@ -523,7 +481,7 @@ PRIVILEGED_FUNCTION EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventG
  * \defgroup xEventGroupSetBits xEventGroupSetBits
  * \ingroup EventGroup
  */
-PRIVILEGED_FUNCTION EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet );
+EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet ) PRIVILEGED_FUNCTION;
 
 /**
  * event_groups.h
@@ -598,7 +556,7 @@ PRIVILEGED_FUNCTION EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGro
  * \ingroup EventGroup
  */
 #if( configUSE_TRACE_FACILITY == 1 )
-	PRIVILEGED_FUNCTION BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, BaseType_t *pxHigherPriorityTaskWoken );
+	BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
 #else
 	#define xEventGroupSetBitsFromISR( xEventGroup, uxBitsToSet, pxHigherPriorityTaskWoken ) xTimerPendFunctionCallFromISR( vEventGroupSetBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToSet, pxHigherPriorityTaskWoken )
 #endif
@@ -727,7 +685,7 @@ PRIVILEGED_FUNCTION EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGro
  * \defgroup xEventGroupSync xEventGroupSync
  * \ingroup EventGroup
  */
-PRIVILEGED_FUNCTION EventBits_t xEventGroupSync( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, const EventBits_t uxBitsToWaitFor, TickType_t xTicksToWait );
+EventBits_t xEventGroupSync( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, const EventBits_t uxBitsToWaitFor, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
 
 
 /**
@@ -763,7 +721,7 @@ PRIVILEGED_FUNCTION EventBits_t xEventGroupSync( EventGroupHandle_t xEventGroup,
  * \defgroup xEventGroupGetBitsFromISR xEventGroupGetBitsFromISR
  * \ingroup EventGroup
  */
-PRIVILEGED_FUNCTION EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup );
+EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup ) PRIVILEGED_FUNCTION;
 
 /**
  * event_groups.h
@@ -777,15 +735,16 @@ PRIVILEGED_FUNCTION EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xE
  *
  * @param xEventGroup The event group being deleted.
  */
-PRIVILEGED_FUNCTION void vEventGroupDelete( EventGroupHandle_t xEventGroup );
+void vEventGroupDelete( EventGroupHandle_t xEventGroup ) PRIVILEGED_FUNCTION;
 
 /* For internal use only. */
-PRIVILEGED_FUNCTION void vEventGroupSetBitsCallback( void *pvEventGroup, const uint32_t ulBitsToSet );
-PRIVILEGED_FUNCTION void vEventGroupClearBitsCallback( void *pvEventGroup, const uint32_t ulBitsToClear );
+void vEventGroupSetBitsCallback( void *pvEventGroup, const uint32_t ulBitsToSet ) PRIVILEGED_FUNCTION;
+void vEventGroupClearBitsCallback( void *pvEventGroup, const uint32_t ulBitsToClear ) PRIVILEGED_FUNCTION;
 
 
 #if (configUSE_TRACE_FACILITY == 1)
-	PRIVILEGED_FUNCTION UBaseType_t uxEventGroupGetNumber( void* xEventGroup );
+	UBaseType_t uxEventGroupGetNumber( void* xEventGroup ) PRIVILEGED_FUNCTION;
+	void vEventGroupSetNumber( void* xEventGroup, UBaseType_t uxEventGroupNumber ) PRIVILEGED_FUNCTION;
 #endif
 
 #ifdef __cplusplus

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/include/list.h

@@ -1,71 +1,29 @@
 /*
-    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
-
-    ***************************************************************************
-    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
-    >>!   distribute a combined work that includes FreeRTOS without being   !<<
-    >>!   obliged to provide the source code for proprietary components     !<<
-    >>!   outside of the FreeRTOS kernel.                                   !<<
-    ***************************************************************************
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
-    link: http://www.freertos.org/a00114.html
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that is more than just the market leader, it     *
-     *    is the industry's de facto standard.                               *
-     *                                                                       *
-     *    Help yourself get started quickly while simultaneously helping     *
-     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
-     *    tutorial book, reference manual, or both:                          *
-     *    http://www.FreeRTOS.org/Documentation                              *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
-    the FAQ page "My application does not run, what could be wrong?".  Have you
-    defined configASSERT()?
-
-    http://www.FreeRTOS.org/support - In return for receiving this top quality
-    embedded software for free we request you assist our global community by
-    participating in the support forum.
-
-    http://www.FreeRTOS.org/training - Investing in training allows your team to
-    be as productive as possible as early as possible.  Now you can receive
-    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
-    Ltd, and the world's leading authority on the world's leading RTOS.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
-    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
-    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and commercial middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
 
 /*
  * This is the list implementation used by the scheduler.  While it is tailored
@@ -205,7 +163,7 @@ typedef struct xMINI_LIST_ITEM MiniListItem_t;
 typedef struct xLIST
 {
 	listFIRST_LIST_INTEGRITY_CHECK_VALUE				/*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
-	configLIST_VOLATILE UBaseType_t uxNumberOfItems;
+	volatile UBaseType_t uxNumberOfItems;
 	ListItem_t * configLIST_VOLATILE pxIndex;			/*< Used to walk through the list.  Points to the last item returned by a call to listGET_OWNER_OF_NEXT_ENTRY (). */
 	MiniListItem_t xListEnd;							/*< List item that contains the maximum possible item value meaning it is always at the end of the list and is therefore used as a marker. */
 	listSECOND_LIST_INTEGRITY_CHECK_VALUE				/*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
@@ -383,7 +341,7 @@ List_t * const pxConstList = ( pxList );													\
  * \page vListInitialise vListInitialise
  * \ingroup LinkedList
  */
-PRIVILEGED_FUNCTION void vListInitialise( List_t * const pxList );
+void vListInitialise( List_t * const pxList ) PRIVILEGED_FUNCTION;
 
 /*
  * Must be called before a list item is used.  This sets the list container to
@@ -394,7 +352,7 @@ PRIVILEGED_FUNCTION void vListInitialise( List_t * const pxList );
  * \page vListInitialiseItem vListInitialiseItem
  * \ingroup LinkedList
  */
-PRIVILEGED_FUNCTION void vListInitialiseItem( ListItem_t * const pxItem );
+void vListInitialiseItem( ListItem_t * const pxItem ) PRIVILEGED_FUNCTION;
 
 /*
  * Insert a list item into a list.  The item will be inserted into the list in
@@ -407,7 +365,7 @@ PRIVILEGED_FUNCTION void vListInitialiseItem( ListItem_t * const pxItem );
  * \page vListInsert vListInsert
  * \ingroup LinkedList
  */
-PRIVILEGED_FUNCTION void vListInsert( List_t * const pxList, ListItem_t * const pxNewListItem );
+void vListInsert( List_t * const pxList, ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
 
 /*
  * Insert a list item into a list.  The item will be inserted in a position
@@ -428,7 +386,7 @@ PRIVILEGED_FUNCTION void vListInsert( List_t * const pxList, ListItem_t * const
  * \page vListInsertEnd vListInsertEnd
  * \ingroup LinkedList
  */
-PRIVILEGED_FUNCTION void vListInsertEnd( List_t * const pxList, ListItem_t * const pxNewListItem );
+void vListInsertEnd( List_t * const pxList, ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
 
 /*
  * Remove an item from a list.  The list item has a pointer to the list that
@@ -443,7 +401,7 @@ PRIVILEGED_FUNCTION void vListInsertEnd( List_t * const pxList, ListItem_t * con
  * \page uxListRemove uxListRemove
  * \ingroup LinkedList
  */
-PRIVILEGED_FUNCTION UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove );
+UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove ) PRIVILEGED_FUNCTION;
 
 #ifdef __cplusplus
 }

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/include/message_buffer.h

@@ -0,0 +1,779 @@
+/*
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+/*
+ * Message buffers build functionality on top of FreeRTOS stream buffers.
+ * Whereas stream buffers are used to send a continuous stream of data from one
+ * task or interrupt to another, message buffers are used to send variable
+ * length discrete messages from one task or interrupt to another.  Their
+ * implementation is light weight, making them particularly suited for interrupt
+ * to task and core to core communication scenarios.
+ *
+ * ***NOTE***:  Uniquely among FreeRTOS objects, the stream buffer
+ * implementation (so also the message buffer implementation, as message buffers
+ * are built on top of stream buffers) assumes there is only one task or
+ * interrupt that will write to the buffer (the writer), and only one task or
+ * interrupt that will read from the buffer (the reader).  It is safe for the
+ * writer and reader to be different tasks or interrupts, but, unlike other
+ * FreeRTOS objects, it is not safe to have multiple different writers or
+ * multiple different readers.  If there are to be multiple different writers
+ * then the application writer must place each call to a writing API function
+ * (such as xMessageBufferSend()) inside a critical section and set the send
+ * block time to 0.  Likewise, if there are to be multiple different readers
+ * then the application writer must place each call to a reading API function
+ * (such as xMessageBufferRead()) inside a critical section and set the receive
+ * timeout to 0.
+ *
+ * Message buffers hold variable length messages.  To enable that, when a
+ * message is written to the message buffer an additional sizeof( size_t ) bytes
+ * are also written to store the message's length (that happens internally, with
+ * the API function).  sizeof( size_t ) is typically 4 bytes on a 32-bit
+ * architecture, so writing a 10 byte message to a message buffer on a 32-bit
+ * architecture will actually reduce the available space in the message buffer
+ * by 14 bytes (10 byte are used by the message, and 4 bytes to hold the length
+ * of the message).
+ */
+
+#ifndef FREERTOS_MESSAGE_BUFFER_H
+#define FREERTOS_MESSAGE_BUFFER_H
+
+/* Message buffers are built onto of stream buffers. */
+#include "stream_buffer.h"
+
+#if defined( __cplusplus )
+extern "C" {
+#endif
+
+/**
+ * Type by which message buffers are referenced.  For example, a call to
+ * xMessageBufferCreate() returns an MessageBufferHandle_t variable that can
+ * then be used as a parameter to xMessageBufferSend(), xMessageBufferReceive(),
+ * etc.
+ */
+typedef void * MessageBufferHandle_t;
+
+/*-----------------------------------------------------------*/
+
+/**
+ * message_buffer.h
+ *
+<pre>
+MessageBufferHandle_t xMessageBufferCreate( size_t xBufferSizeBytes );
+</pre>
+ *
+ * Creates a new message buffer using dynamically allocated memory.  See
+ * xMessageBufferCreateStatic() for a version that uses statically allocated
+ * memory (memory that is allocated at compile time).
+ *
+ * configSUPPORT_DYNAMIC_ALLOCATION must be set to 1 or left undefined in
+ * FreeRTOSConfig.h for xMessageBufferCreate() to be available.
+ *
+ * @param xBufferSizeBytes The total number of bytes (not messages) the message
+ * buffer will be able to hold at any one time.  When a message is written to
+ * the message buffer an additional sizeof( size_t ) bytes are also written to
+ * store the message's length.  sizeof( size_t ) is typically 4 bytes on a
+ * 32-bit architecture, so on most 32-bit architectures a 10 byte message will
+ * take up 14 bytes of message buffer space.
+ *
+ * @return If NULL is returned, then the message buffer cannot be created
+ * because there is insufficient heap memory available for FreeRTOS to allocate
+ * the message buffer data structures and storage area.  A non-NULL value being
+ * returned indicates that the message buffer has been created successfully -
+ * the returned value should be stored as the handle to the created message
+ * buffer.
+ *
+ * Example use:
+<pre>
+
+void vAFunction( void )
+{
+MessageBufferHandle_t xMessageBuffer;
+const size_t xMessageBufferSizeBytes = 100;
+
+    // Create a message buffer that can hold 100 bytes.  The memory used to hold
+    // both the message buffer structure and the messages themselves is allocated
+    // dynamically.  Each message added to the buffer consumes an additional 4
+    // bytes which are used to hold the lengh of the message.
+    xMessageBuffer = xMessageBufferCreate( xMessageBufferSizeBytes );
+
+    if( xMessageBuffer == NULL )
+    {
+        // There was not enough heap memory space available to create the
+        // message buffer.
+    }
+    else
+    {
+        // The message buffer was created successfully and can now be used.
+    }
+
+</pre>
+ * \defgroup xMessageBufferCreate xMessageBufferCreate
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferCreate( xBufferSizeBytes ) ( MessageBufferHandle_t ) xStreamBufferGenericCreate( xBufferSizeBytes, ( size_t ) 0, pdTRUE )
+
+/**
+ * message_buffer.h
+ *
+<pre>
+MessageBufferHandle_t xMessageBufferCreateStatic( size_t xBufferSizeBytes,
+                                                  uint8_t *pucMessageBufferStorageArea,
+                                                  StaticMessageBuffer_t *pxStaticMessageBuffer );
+</pre>
+ * Creates a new message buffer using statically allocated memory.  See
+ * xMessageBufferCreate() for a version that uses dynamically allocated memory.
+ *
+ * @param xBufferSizeBytes The size, in bytes, of the buffer pointed to by the
+ * pucMessageBufferStorageArea parameter.  When a message is written to the
+ * message buffer an additional sizeof( size_t ) bytes are also written to store
+ * the message's length.  sizeof( size_t ) is typically 4 bytes on a 32-bit
+ * architecture, so on most 32-bit architecture a 10 byte message will take up
+ * 14 bytes of message buffer space.  The maximum number of bytes that can be
+ * stored in the message buffer is actually (xBufferSizeBytes - 1).
+ *
+ * @param pucMessageBufferStorageArea Must point to a uint8_t array that is at
+ * least xBufferSizeBytes + 1 big.  This is the array to which messages are
+ * copied when they are written to the message buffer.
+ *
+ * @param pxStaticMessageBuffer Must point to a variable of type
+ * StaticMessageBuffer_t, which will be used to hold the message buffer's data
+ * structure.
+ *
+ * @return If the message buffer is created successfully then a handle to the
+ * created message buffer is returned. If either pucMessageBufferStorageArea or
+ * pxStaticmessageBuffer are NULL then NULL is returned.
+ *
+ * Example use:
+<pre>
+
+// Used to dimension the array used to hold the messages.  The available space
+// will actually be one less than this, so 999.
+#define STORAGE_SIZE_BYTES 1000
+
+// Defines the memory that will actually hold the messages within the message
+// buffer.
+static uint8_t ucStorageBuffer[ STORAGE_SIZE_BYTES ];
+
+// The variable used to hold the message buffer structure.
+StaticMessageBuffer_t xMessageBufferStruct;
+
+void MyFunction( void )
+{
+MessageBufferHandle_t xMessageBuffer;
+
+    xMessageBuffer = xMessageBufferCreateStatic( sizeof( ucBufferStorage ),
+                                                 ucBufferStorage,
+                                                 &xMessageBufferStruct );
+
+    // As neither the pucMessageBufferStorageArea or pxStaticMessageBuffer
+    // parameters were NULL, xMessageBuffer will not be NULL, and can be used to
+    // reference the created message buffer in other message buffer API calls.
+
+    // Other code that uses the message buffer can go here.
+}
+
+</pre>
+ * \defgroup xMessageBufferCreateStatic xMessageBufferCreateStatic
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferCreateStatic( xBufferSizeBytes, pucMessageBufferStorageArea, pxStaticMessageBuffer ) ( MessageBufferHandle_t ) xStreamBufferGenericCreateStatic( xBufferSizeBytes, 0, pdTRUE, pucMessageBufferStorageArea, pxStaticMessageBuffer )
+
+/**
+ * message_buffer.h
+ *
+<pre>
+size_t xMessageBufferSend( MessageBufferHandle_t xMessageBuffer,
+                           const void *pvTxData,
+                           size_t xDataLengthBytes,
+                           TickType_t xTicksToWait );
+<pre>
+ *
+ * Sends a discrete message to the message buffer.  The message can be any
+ * length that fits within the buffer's free space, and is copied into the
+ * buffer.
+ *
+ * ***NOTE***:  Uniquely among FreeRTOS objects, the stream buffer
+ * implementation (so also the message buffer implementation, as message buffers
+ * are built on top of stream buffers) assumes there is only one task or
+ * interrupt that will write to the buffer (the writer), and only one task or
+ * interrupt that will read from the buffer (the reader).  It is safe for the
+ * writer and reader to be different tasks or interrupts, but, unlike other
+ * FreeRTOS objects, it is not safe to have multiple different writers or
+ * multiple different readers.  If there are to be multiple different writers
+ * then the application writer must place each call to a writing API function
+ * (such as xMessageBufferSend()) inside a critical section and set the send
+ * block time to 0.  Likewise, if there are to be multiple different readers
+ * then the application writer must place each call to a reading API function
+ * (such as xMessageBufferRead()) inside a critical section and set the receive
+ * block time to 0.
+ *
+ * Use xMessageBufferSend() to write to a message buffer from a task.  Use
+ * xMessageBufferSendFromISR() to write to a message buffer from an interrupt
+ * service routine (ISR).
+ *
+ * @param xMessageBuffer The handle of the message buffer to which a message is
+ * being sent.
+ *
+ * @param pvTxData A pointer to the message that is to be copied into the
+ * message buffer.
+ *
+ * @param xDataLengthBytes The length of the message.  That is, the number of
+ * bytes to copy from pvTxData into the message buffer.  When a message is
+ * written to the message buffer an additional sizeof( size_t ) bytes are also
+ * written to store the message's length.  sizeof( size_t ) is typically 4 bytes
+ * on a 32-bit architecture, so on most 32-bit architecture setting
+ * xDataLengthBytes to 20 will reduce the free space in the message buffer by 24
+ * bytes (20 bytes of message data and 4 bytes to hold the message length).
+ *
+ * @param xTicksToWait The maximum amount of time the calling task should remain
+ * in the Blocked state to wait for enough space to become available in the
+ * message buffer, should the message buffer have insufficient space when
+ * xMessageBufferSend() is called.  The calling task will never block if
+ * xTicksToWait is zero.  The block time is specified in tick periods, so the
+ * absolute time it represents is dependent on the tick frequency.  The macro
+ * pdMS_TO_TICKS() can be used to convert a time specified in milliseconds into
+ * a time specified in ticks.  Setting xTicksToWait to portMAX_DELAY will cause
+ * the task to wait indefinitely (without timing out), provided
+ * INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h.  Tasks do not use any
+ * CPU time when they are in the Blocked state.
+ *
+ * @return The number of bytes written to the message buffer.  If the call to
+ * xMessageBufferSend() times out before there was enough space to write the
+ * message into the message buffer then zero is returned.  If the call did not
+ * time out then xDataLengthBytes is returned.
+ *
+ * Example use:
+<pre>
+void vAFunction( MessageBufferHandle_t xMessageBuffer )
+{
+size_t xBytesSent;
+uint8_t ucArrayToSend[] = { 0, 1, 2, 3 };
+char *pcStringToSend = "String to send";
+const TickType_t x100ms = pdMS_TO_TICKS( 100 );
+
+    // Send an array to the message buffer, blocking for a maximum of 100ms to
+    // wait for enough space to be available in the message buffer.
+    xBytesSent = xMessageBufferSend( xMessageBuffer, ( void * ) ucArrayToSend, sizeof( ucArrayToSend ), x100ms );
+
+    if( xBytesSent != sizeof( ucArrayToSend ) )
+    {
+        // The call to xMessageBufferSend() times out before there was enough
+        // space in the buffer for the data to be written.
+    }
+
+    // Send the string to the message buffer.  Return immediately if there is
+    // not enough space in the buffer.
+    xBytesSent = xMessageBufferSend( xMessageBuffer, ( void * ) pcStringToSend, strlen( pcStringToSend ), 0 );
+
+    if( xBytesSent != strlen( pcStringToSend ) )
+    {
+        // The string could not be added to the message buffer because there was
+        // not enough free space in the buffer.
+    }
+}
+</pre>
+ * \defgroup xMessageBufferSend xMessageBufferSend
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferSend( xMessageBuffer, pvTxData, xDataLengthBytes, xTicksToWait ) xStreamBufferSend( ( StreamBufferHandle_t ) xMessageBuffer, pvTxData, xDataLengthBytes, xTicksToWait )
+
+/**
+ * message_buffer.h
+ *
+<pre>
+size_t xMessageBufferSendFromISR( MessageBufferHandle_t xMessageBuffer,
+                                  const void *pvTxData,
+                                  size_t xDataLengthBytes,
+                                  BaseType_t *pxHigherPriorityTaskWoken );
+<pre>
+ *
+ * Interrupt safe version of the API function that sends a discrete message to
+ * the message buffer.  The message can be any length that fits within the
+ * buffer's free space, and is copied into the buffer.
+ *
+ * ***NOTE***:  Uniquely among FreeRTOS objects, the stream buffer
+ * implementation (so also the message buffer implementation, as message buffers
+ * are built on top of stream buffers) assumes there is only one task or
+ * interrupt that will write to the buffer (the writer), and only one task or
+ * interrupt that will read from the buffer (the reader).  It is safe for the
+ * writer and reader to be different tasks or interrupts, but, unlike other
+ * FreeRTOS objects, it is not safe to have multiple different writers or
+ * multiple different readers.  If there are to be multiple different writers
+ * then the application writer must place each call to a writing API function
+ * (such as xMessageBufferSend()) inside a critical section and set the send
+ * block time to 0.  Likewise, if there are to be multiple different readers
+ * then the application writer must place each call to a reading API function
+ * (such as xMessageBufferRead()) inside a critical section and set the receive
+ * block time to 0.
+ *
+ * Use xMessageBufferSend() to write to a message buffer from a task.  Use
+ * xMessageBufferSendFromISR() to write to a message buffer from an interrupt
+ * service routine (ISR).
+ *
+ * @param xMessageBuffer The handle of the message buffer to which a message is
+ * being sent.
+ *
+ * @param pvTxData A pointer to the message that is to be copied into the
+ * message buffer.
+ *
+ * @param xDataLengthBytes The length of the message.  That is, the number of
+ * bytes to copy from pvTxData into the message buffer.  When a message is
+ * written to the message buffer an additional sizeof( size_t ) bytes are also
+ * written to store the message's length.  sizeof( size_t ) is typically 4 bytes
+ * on a 32-bit architecture, so on most 32-bit architecture setting
+ * xDataLengthBytes to 20 will reduce the free space in the message buffer by 24
+ * bytes (20 bytes of message data and 4 bytes to hold the message length).
+ *
+ * @param pxHigherPriorityTaskWoken  It is possible that a message buffer will
+ * have a task blocked on it waiting for data.  Calling
+ * xMessageBufferSendFromISR() can make data available, and so cause a task that
+ * was waiting for data to leave the Blocked state.  If calling
+ * xMessageBufferSendFromISR() causes a task to leave the Blocked state, and the
+ * unblocked task has a priority higher than the currently executing task (the
+ * task that was interrupted), then, internally, xMessageBufferSendFromISR()
+ * will set *pxHigherPriorityTaskWoken to pdTRUE.  If
+ * xMessageBufferSendFromISR() sets this value to pdTRUE, then normally a
+ * context switch should be performed before the interrupt is exited.  This will
+ * ensure that the interrupt returns directly to the highest priority Ready
+ * state task.  *pxHigherPriorityTaskWoken should be set to pdFALSE before it
+ * is passed into the function.  See the code example below for an example.
+ *
+ * @return The number of bytes actually written to the message buffer.  If the
+ * message buffer didn't have enough free space for the message to be stored
+ * then 0 is returned, otherwise xDataLengthBytes is returned.
+ *
+ * Example use:
+<pre>
+// A message buffer that has already been created.
+MessageBufferHandle_t xMessageBuffer;
+
+void vAnInterruptServiceRoutine( void )
+{
+size_t xBytesSent;
+char *pcStringToSend = "String to send";
+BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE.
+
+    // Attempt to send the string to the message buffer.
+    xBytesSent = xMessageBufferSendFromISR( xMessageBuffer,
+                                            ( void * ) pcStringToSend,
+                                            strlen( pcStringToSend ),
+                                            &xHigherPriorityTaskWoken );
+
+    if( xBytesSent != strlen( pcStringToSend ) )
+    {
+        // The string could not be added to the message buffer because there was
+        // not enough free space in the buffer.
+    }
+
+    // If xHigherPriorityTaskWoken was set to pdTRUE inside
+    // xMessageBufferSendFromISR() then a task that has a priority above the
+    // priority of the currently executing task was unblocked and a context
+    // switch should be performed to ensure the ISR returns to the unblocked
+    // task.  In most FreeRTOS ports this is done by simply passing
+    // xHigherPriorityTaskWoken into taskYIELD_FROM_ISR(), which will test the
+    // variables value, and perform the context switch if necessary.  Check the
+    // documentation for the port in use for port specific instructions.
+    taskYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+}
+</pre>
+ * \defgroup xMessageBufferSendFromISR xMessageBufferSendFromISR
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferSendFromISR( xMessageBuffer, pvTxData, xDataLengthBytes, pxHigherPriorityTaskWoken ) xStreamBufferSendFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pvTxData, xDataLengthBytes, pxHigherPriorityTaskWoken )
+
+/**
+ * message_buffer.h
+ *
+<pre>
+size_t xMessageBufferReceive( MessageBufferHandle_t xMessageBuffer,
+                              void *pvRxData,
+                              size_t xBufferLengthBytes,
+                              TickType_t xTicksToWait );
+</pre>
+ *
+ * Receives a discrete message from a message buffer.  Messages can be of
+ * variable length and are copied out of the buffer.
+ *
+ * ***NOTE***:  Uniquely among FreeRTOS objects, the stream buffer
+ * implementation (so also the message buffer implementation, as message buffers
+ * are built on top of stream buffers) assumes there is only one task or
+ * interrupt that will write to the buffer (the writer), and only one task or
+ * interrupt that will read from the buffer (the reader).  It is safe for the
+ * writer and reader to be different tasks or interrupts, but, unlike other
+ * FreeRTOS objects, it is not safe to have multiple different writers or
+ * multiple different readers.  If there are to be multiple different writers
+ * then the application writer must place each call to a writing API function
+ * (such as xMessageBufferSend()) inside a critical section and set the send
+ * block time to 0.  Likewise, if there are to be multiple different readers
+ * then the application writer must place each call to a reading API function
+ * (such as xMessageBufferRead()) inside a critical section and set the receive
+ * block time to 0.
+ *
+ * Use xMessageBufferReceive() to read from a message buffer from a task.  Use
+ * xMessageBufferReceiveFromISR() to read from a message buffer from an
+ * interrupt service routine (ISR).
+ *
+ * @param xMessageBuffer The handle of the message buffer from which a message
+ * is being received.
+ *
+ * @param pvRxData A pointer to the buffer into which the received message is
+ * to be copied.
+ *
+ * @param xBufferLengthBytes The length of the buffer pointed to by the pvRxData
+ * parameter.  This sets the maximum length of the message that can be received.
+ * If xBufferLengthBytes is too small to hold the next message then the message
+ * will be left in the message buffer and 0 will be returned.
+ *
+ * @param xTicksToWait The maximum amount of time the task should remain in the
+ * Blocked state to wait for a message, should the message buffer be empty.
+ * xMessageBufferReceive() will return immediately if xTicksToWait is zero and
+ * the message buffer is empty.  The block time is specified in tick periods, so
+ * the absolute time it represents is dependent on the tick frequency.  The
+ * macro pdMS_TO_TICKS() can be used to convert a time specified in milliseconds
+ * into a time specified in ticks.  Setting xTicksToWait to portMAX_DELAY will
+ * cause the task to wait indefinitely (without timing out), provided
+ * INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h.  Tasks do not use any
+ * CPU time when they are in the Blocked state.
+ *
+ * @return The length, in bytes, of the message read from the message buffer, if
+ * any.  If xMessageBufferReceive() times out before a message became available
+ * then zero is returned.  If the length of the message is greater than
+ * xBufferLengthBytes then the message will be left in the message buffer and
+ * zero is returned.
+ *
+ * Example use:
+<pre>
+void vAFunction( MessageBuffer_t xMessageBuffer )
+{
+uint8_t ucRxData[ 20 ];
+size_t xReceivedBytes;
+const TickType_t xBlockTime = pdMS_TO_TICKS( 20 );
+
+    // Receive the next message from the message buffer.  Wait in the Blocked
+    // state (so not using any CPU processing time) for a maximum of 100ms for
+    // a message to become available.
+    xReceivedBytes = xMessageBufferReceive( xMessageBuffer,
+                                            ( void * ) ucRxData,
+                                            sizeof( ucRxData ),
+                                            xBlockTime );
+
+    if( xReceivedBytes > 0 )
+    {
+        // A ucRxData contains a message that is xReceivedBytes long.  Process
+        // the message here....
+    }
+}
+</pre>
+ * \defgroup xMessageBufferReceive xMessageBufferReceive
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferReceive( xMessageBuffer, pvRxData, xBufferLengthBytes, xTicksToWait ) xStreamBufferReceive( ( StreamBufferHandle_t ) xMessageBuffer, pvRxData, xBufferLengthBytes, xTicksToWait )
+
+
+/**
+ * message_buffer.h
+ *
+<pre>
+size_t xMessageBufferReceiveFromISR( MessageBufferHandle_t xMessageBuffer,
+                                     void *pvRxData,
+                                     size_t xBufferLengthBytes,
+                                     BaseType_t *pxHigherPriorityTaskWoken );
+</pre>
+ *
+ * An interrupt safe version of the API function that receives a discrete
+ * message from a message buffer.  Messages can be of variable length and are
+ * copied out of the buffer.
+ *
+ * ***NOTE***:  Uniquely among FreeRTOS objects, the stream buffer
+ * implementation (so also the message buffer implementation, as message buffers
+ * are built on top of stream buffers) assumes there is only one task or
+ * interrupt that will write to the buffer (the writer), and only one task or
+ * interrupt that will read from the buffer (the reader).  It is safe for the
+ * writer and reader to be different tasks or interrupts, but, unlike other
+ * FreeRTOS objects, it is not safe to have multiple different writers or
+ * multiple different readers.  If there are to be multiple different writers
+ * then the application writer must place each call to a writing API function
+ * (such as xMessageBufferSend()) inside a critical section and set the send
+ * block time to 0.  Likewise, if there are to be multiple different readers
+ * then the application writer must place each call to a reading API function
+ * (such as xMessageBufferRead()) inside a critical section and set the receive
+ * block time to 0.
+ *
+ * Use xMessageBufferReceive() to read from a message buffer from a task.  Use
+ * xMessageBufferReceiveFromISR() to read from a message buffer from an
+ * interrupt service routine (ISR).
+ *
+ * @param xMessageBuffer The handle of the message buffer from which a message
+ * is being received.
+ *
+ * @param pvRxData A pointer to the buffer into which the received message is
+ * to be copied.
+ *
+ * @param xBufferLengthBytes The length of the buffer pointed to by the pvRxData
+ * parameter.  This sets the maximum length of the message that can be received.
+ * If xBufferLengthBytes is too small to hold the next message then the message
+ * will be left in the message buffer and 0 will be returned.
+ *
+ * @param pxHigherPriorityTaskWoken  It is possible that a message buffer will
+ * have a task blocked on it waiting for space to become available.  Calling
+ * xMessageBufferReceiveFromISR() can make space available, and so cause a task
+ * that is waiting for space to leave the Blocked state.  If calling
+ * xMessageBufferReceiveFromISR() causes a task to leave the Blocked state, and
+ * the unblocked task has a priority higher than the currently executing task
+ * (the task that was interrupted), then, internally,
+ * xMessageBufferReceiveFromISR() will set *pxHigherPriorityTaskWoken to pdTRUE.
+ * If xMessageBufferReceiveFromISR() sets this value to pdTRUE, then normally a
+ * context switch should be performed before the interrupt is exited.  That will
+ * ensure the interrupt returns directly to the highest priority Ready state
+ * task.  *pxHigherPriorityTaskWoken should be set to pdFALSE before it is
+ * passed into the function.  See the code example below for an example.
+ *
+ * @return The length, in bytes, of the message read from the message buffer, if
+ * any.
+ *
+ * Example use:
+<pre>
+// A message buffer that has already been created.
+MessageBuffer_t xMessageBuffer;
+
+void vAnInterruptServiceRoutine( void )
+{
+uint8_t ucRxData[ 20 ];
+size_t xReceivedBytes;
+BaseType_t xHigherPriorityTaskWoken = pdFALSE;  // Initialised to pdFALSE.
+
+    // Receive the next message from the message buffer.
+    xReceivedBytes = xMessageBufferReceiveFromISR( xMessageBuffer,
+                                                  ( void * ) ucRxData,
+                                                  sizeof( ucRxData ),
+                                                  &xHigherPriorityTaskWoken );
+
+    if( xReceivedBytes > 0 )
+    {
+        // A ucRxData contains a message that is xReceivedBytes long.  Process
+        // the message here....
+    }
+
+    // If xHigherPriorityTaskWoken was set to pdTRUE inside
+    // xMessageBufferReceiveFromISR() then a task that has a priority above the
+    // priority of the currently executing task was unblocked and a context
+    // switch should be performed to ensure the ISR returns to the unblocked
+    // task.  In most FreeRTOS ports this is done by simply passing
+    // xHigherPriorityTaskWoken into taskYIELD_FROM_ISR(), which will test the
+    // variables value, and perform the context switch if necessary.  Check the
+    // documentation for the port in use for port specific instructions.
+    taskYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+}
+</pre>
+ * \defgroup xMessageBufferReceiveFromISR xMessageBufferReceiveFromISR
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferReceiveFromISR( xMessageBuffer, pvRxData, xBufferLengthBytes, pxHigherPriorityTaskWoken ) xStreamBufferReceiveFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pvRxData, xBufferLengthBytes, pxHigherPriorityTaskWoken )
+
+/**
+ * message_buffer.h
+ *
+<pre>
+void vMessageBufferDelete( MessageBufferHandle_t xMessageBuffer );
+</pre>
+ *
+ * Deletes a message buffer that was previously created using a call to
+ * xMessageBufferCreate() or xMessageBufferCreateStatic().  If the message
+ * buffer was created using dynamic memory (that is, by xMessageBufferCreate()),
+ * then the allocated memory is freed.
+ *
+ * A message buffer handle must not be used after the message buffer has been
+ * deleted.
+ *
+ * @param xMessageBuffer The handle of the message buffer to be deleted.
+ *
+ */
+#define vMessageBufferDelete( xMessageBuffer ) vStreamBufferDelete( ( StreamBufferHandle_t ) xMessageBuffer )
+
+/**
+ * message_buffer.h
+<pre>
+BaseType_t xMessageBufferIsFull( MessageBufferHandle_t xMessageBuffer ) );
+</pre>
+ *
+ * Tests to see if a message buffer is full.  A message buffer is full if it
+ * cannot accept any more messages, of any size, until space is made available
+ * by a message being removed from the message buffer.
+ *
+ * @param xMessageBuffer The handle of the message buffer being queried.
+ *
+ * @return If the message buffer referenced by xMessageBuffer is full then
+ * pdTRUE is returned.  Otherwise pdFALSE is returned.
+ */
+#define xMessageBufferIsFull( xMessageBuffer ) xStreamBufferIsFull( ( StreamBufferHandle_t ) xMessageBuffer )
+
+/**
+ * message_buffer.h
+<pre>
+BaseType_t xMessageBufferIsEmpty( MessageBufferHandle_t xMessageBuffer ) );
+</pre>
+ *
+ * Tests to see if a message buffer is empty (does not contain any messages).
+ *
+ * @param xMessageBuffer The handle of the message buffer being queried.
+ *
+ * @return If the message buffer referenced by xMessageBuffer is empty then
+ * pdTRUE is returned.  Otherwise pdFALSE is returned.
+ *
+ */
+#define xMessageBufferIsEmpty( xMessageBuffer ) xStreamBufferIsEmpty( ( StreamBufferHandle_t ) xMessageBuffer )
+
+/**
+ * message_buffer.h
+<pre>
+BaseType_t xMessageBufferReset( MessageBufferHandle_t xMessageBuffer );
+</pre>
+ *
+ * Resets a message buffer to its initial empty state, discarding any message it
+ * contained.
+ *
+ * A message buffer can only be reset if there are no tasks blocked on it.
+ *
+ * @param xMessageBuffer The handle of the message buffer being reset.
+ *
+ * @return If the message buffer was reset then pdPASS is returned.  If the
+ * message buffer could not be reset because either there was a task blocked on
+ * the message queue to wait for space to become available, or to wait for a
+ * a message to be available, then pdFAIL is returned.
+ *
+ * \defgroup xMessageBufferReset xMessageBufferReset
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferReset( xMessageBuffer ) xStreamBufferReset( ( StreamBufferHandle_t ) xMessageBuffer )
+
+
+/**
+ * message_buffer.h
+<pre>
+size_t xMessageBufferSpaceAvailable( MessageBufferHandle_t xMessageBuffer ) );
+</pre>
+ * Returns the number of bytes of free space in the message buffer.
+ *
+ * @param xMessageBuffer The handle of the message buffer being queried.
+ *
+ * @return The number of bytes that can be written to the message buffer before
+ * the message buffer would be full.  When a message is written to the message
+ * buffer an additional sizeof( size_t ) bytes are also written to store the
+ * message's length.  sizeof( size_t ) is typically 4 bytes on a 32-bit
+ * architecture, so if xMessageBufferSpacesAvailable() returns 10, then the size
+ * of the largest message that can be written to the message buffer is 6 bytes.
+ *
+ * \defgroup xMessageBufferSpaceAvailable xMessageBufferSpaceAvailable
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferSpaceAvailable( xMessageBuffer ) xStreamBufferSpacesAvailable( ( StreamBufferHandle_t ) xMessageBuffer )
+
+/**
+ * message_buffer.h
+ *
+<pre>
+BaseType_t xMessageBufferSendCompletedFromISR( MessageBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
+</pre>
+ *
+ * For advanced users only.
+ *
+ * The sbSEND_COMPLETED() macro is called from within the FreeRTOS APIs when
+ * data is sent to a message buffer or stream buffer.  If there was a task that
+ * was blocked on the message or stream buffer waiting for data to arrive then
+ * the sbSEND_COMPLETED() macro sends a notification to the task to remove it
+ * from the Blocked state.  xMessageBufferSendCompletedFromISR() does the same
+ * thing.  It is provided to enable application writers to implement their own
+ * version of sbSEND_COMPLETED(), and MUST NOT BE USED AT ANY OTHER TIME.
+ *
+ * See the example implemented in FreeRTOS/Demo/Minimal/MessageBufferAMP.c for
+ * additional information.
+ *
+ * @param xStreamBuffer The handle of the stream buffer to which data was
+ * written.
+ *
+ * @param pxHigherPriorityTaskWoken *pxHigherPriorityTaskWoken should be
+ * initialised to pdFALSE before it is passed into
+ * xMessageBufferSendCompletedFromISR().  If calling
+ * xMessageBufferSendCompletedFromISR() removes a task from the Blocked state,
+ * and the task has a priority above the priority of the currently running task,
+ * then *pxHigherPriorityTaskWoken will get set to pdTRUE indicating that a
+ * context switch should be performed before exiting the ISR.
+ *
+ * @return If a task was removed from the Blocked state then pdTRUE is returned.
+ * Otherwise pdFALSE is returned.
+ *
+ * \defgroup xMessageBufferSendCompletedFromISR xMessageBufferSendCompletedFromISR
+ * \ingroup StreamBufferManagement
+ */
+#define xMessageBufferSendCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) xStreamBufferSendCompletedFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pxHigherPriorityTaskWoken )
+
+/**
+ * message_buffer.h
+ *
+<pre>
+BaseType_t xMessageBufferReceiveCompletedFromISR( MessageBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
+</pre>
+ *
+ * For advanced users only.
+ *
+ * The sbRECEIVE_COMPLETED() macro is called from within the FreeRTOS APIs when
+ * data is read out of a message buffer or stream buffer.  If there was a task
+ * that was blocked on the message or stream buffer waiting for data to arrive
+ * then the sbRECEIVE_COMPLETED() macro sends a notification to the task to
+ * remove it from the Blocked state.  xMessageBufferReceiveCompletedFromISR()
+ * does the same thing.  It is provided to enable application writers to
+ * implement their own version of sbRECEIVE_COMPLETED(), and MUST NOT BE USED AT
+ * ANY OTHER TIME.
+ *
+ * See the example implemented in FreeRTOS/Demo/Minimal/MessageBufferAMP.c for
+ * additional information.
+ *
+ * @param xStreamBuffer The handle of the stream buffer from which data was
+ * read.
+ *
+ * @param pxHigherPriorityTaskWoken *pxHigherPriorityTaskWoken should be
+ * initialised to pdFALSE before it is passed into
+ * xMessageBufferReceiveCompletedFromISR().  If calling
+ * xMessageBufferReceiveCompletedFromISR() removes a task from the Blocked state,
+ * and the task has a priority above the priority of the currently running task,
+ * then *pxHigherPriorityTaskWoken will get set to pdTRUE indicating that a
+ * context switch should be performed before exiting the ISR.
+ *
+ * @return If a task was removed from the Blocked state then pdTRUE is returned.
+ * Otherwise pdFALSE is returned.
+ *
+ * \defgroup xMessageBufferReceiveCompletedFromISR xMessageBufferReceiveCompletedFromISR
+ * \ingroup StreamBufferManagement
+ */
+#define xMessageBufferReceiveCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) xStreamBufferReceiveCompletedFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pxHigherPriorityTaskWoken )
+
+#if defined( __cplusplus )
+} /* extern "C" */
+#endif
+
+#endif	/* !defined( FREERTOS_MESSAGE_BUFFER_H ) */

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_prototypes.h

@@ -1,71 +1,29 @@
 /*
-    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
-
-    ***************************************************************************
-    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
-    >>!   distribute a combined work that includes FreeRTOS without being   !<<
-    >>!   obliged to provide the source code for proprietary components     !<<
-    >>!   outside of the FreeRTOS kernel.                                   !<<
-    ***************************************************************************
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
-    link: http://www.freertos.org/a00114.html
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that is more than just the market leader, it     *
-     *    is the industry's de facto standard.                               *
-     *                                                                       *
-     *    Help yourself get started quickly while simultaneously helping     *
-     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
-     *    tutorial book, reference manual, or both:                          *
-     *    http://www.FreeRTOS.org/Documentation                              *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
-    the FAQ page "My application does not run, what could be wrong?".  Have you
-    defined configASSERT()?
-
-    http://www.FreeRTOS.org/support - In return for receiving this top quality
-    embedded software for free we request you assist our global community by
-    participating in the support forum.
-
-    http://www.FreeRTOS.org/training - Investing in training allows your team to
-    be as productive as possible as early as possible.  Now you can receive
-    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
-    Ltd, and the world's leading authority on the world's leading RTOS.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
-    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
-    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and commercial middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
 
 /*
  * When the MPU is used the standard (non MPU) API functions are mapped to
@@ -79,10 +37,11 @@
 #ifndef MPU_PROTOTYPES_H
 #define MPU_PROTOTYPES_H
 
-/* MPU versions of tasks.h API function. */
+/* MPU versions of tasks.h API functions. */
 BaseType_t MPU_xTaskCreate( TaskFunction_t pxTaskCode, const char * const pcName, const uint16_t usStackDepth, void * const pvParameters, UBaseType_t uxPriority, TaskHandle_t * const pxCreatedTask );
 TaskHandle_t MPU_xTaskCreateStatic( TaskFunction_t pxTaskCode, const char * const pcName, const uint32_t ulStackDepth, void * const pvParameters, UBaseType_t uxPriority, StackType_t * const puxStackBuffer, StaticTask_t * const pxTaskBuffer );
 BaseType_t MPU_xTaskCreateRestricted( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask );
+BaseType_t MPU_xTaskCreateRestrictedStatic( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask );
 void MPU_vTaskAllocateMPURegions( TaskHandle_t xTask, const MemoryRegion_t * const pxRegions );
 void MPU_vTaskDelete( TaskHandle_t xTaskToDelete );
 void MPU_vTaskDelay( const TickType_t xTicksToDelay );
@@ -122,9 +81,11 @@ BaseType_t MPU_xTaskCheckForTimeOut( TimeOut_t * const pxTimeOut, TickType_t * c
 void MPU_vTaskMissedYield( void );
 BaseType_t MPU_xTaskGetSchedulerState( void );
 
-/* MPU versions of queue.h API function. */
+/* MPU versions of queue.h API functions. */
 BaseType_t MPU_xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition );
-BaseType_t MPU_xQueueGenericReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait, const BaseType_t xJustPeek );
+BaseType_t MPU_xQueueReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait );
+BaseType_t MPU_xQueuePeek( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait );
+BaseType_t MPU_xQueueSemaphoreTake( QueueHandle_t xQueue, TickType_t xTicksToWait );
 UBaseType_t MPU_uxQueueMessagesWaiting( const QueueHandle_t xQueue );
 UBaseType_t MPU_uxQueueSpacesAvailable( const QueueHandle_t xQueue );
 void MPU_vQueueDelete( QueueHandle_t xQueue );
@@ -149,9 +110,9 @@ void MPU_vQueueSetQueueNumber( QueueHandle_t xQueue, UBaseType_t uxQueueNumber )
 UBaseType_t MPU_uxQueueGetQueueNumber( QueueHandle_t xQueue );
 uint8_t MPU_ucQueueGetQueueType( QueueHandle_t xQueue );
 
-/* MPU versions of timers.h API function. */
-TimerHandle_t MPU_xTimerCreate(	const char * const pcTimerName, const TickType_t xTimerPeriodInTicks, const UBaseType_t uxAutoReload, void * const pvTimerID, TimerCallbackFunction_t pxCallbackFunction );
-TimerHandle_t MPU_xTimerCreateStatic(	const char * const pcTimerName, const TickType_t xTimerPeriodInTicks, const UBaseType_t uxAutoReload, void * const pvTimerID, TimerCallbackFunction_t pxCallbackFunction, StaticTimer_t *pxTimerBuffer );
+/* MPU versions of timers.h API functions. */
+TimerHandle_t MPU_xTimerCreate( const char * const pcTimerName, const TickType_t xTimerPeriodInTicks, const UBaseType_t uxAutoReload, void * const pvTimerID, TimerCallbackFunction_t pxCallbackFunction );
+TimerHandle_t MPU_xTimerCreateStatic( const char * const pcTimerName, const TickType_t xTimerPeriodInTicks, const UBaseType_t uxAutoReload, void * const pvTimerID, TimerCallbackFunction_t pxCallbackFunction, StaticTimer_t *pxTimerBuffer );
 void * MPU_pvTimerGetTimerID( const TimerHandle_t xTimer );
 void MPU_vTimerSetTimerID( TimerHandle_t xTimer, void *pvNewID );
 BaseType_t MPU_xTimerIsTimerActive( TimerHandle_t xTimer );
@@ -163,7 +124,7 @@ TickType_t MPU_xTimerGetExpiryTime( TimerHandle_t xTimer );
 BaseType_t MPU_xTimerCreateTimerTask( void );
 BaseType_t MPU_xTimerGenericCommand( TimerHandle_t xTimer, const BaseType_t xCommandID, const TickType_t xOptionalValue, BaseType_t * const pxHigherPriorityTaskWoken, const TickType_t xTicksToWait );
 
-/* MPU versions of event_group.h API function. */
+/* MPU versions of event_group.h API functions. */
 EventGroupHandle_t MPU_xEventGroupCreate( void );
 EventGroupHandle_t MPU_xEventGroupCreateStatic( StaticEventGroup_t *pxEventGroupBuffer );
 EventBits_t MPU_xEventGroupWaitBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToWaitFor, const BaseType_t xClearOnExit, const BaseType_t xWaitForAllBits, TickType_t xTicksToWait );
@@ -173,5 +134,22 @@ EventBits_t MPU_xEventGroupSync( EventGroupHandle_t xEventGroup, const EventBits
 void MPU_vEventGroupDelete( EventGroupHandle_t xEventGroup );
 UBaseType_t MPU_uxEventGroupGetNumber( void* xEventGroup );
 
+/* MPU versions of message/stream_buffer.h API functions. */
+size_t MPU_xStreamBufferSend( StreamBufferHandle_t xStreamBuffer, const void *pvTxData, size_t xDataLengthBytes, TickType_t xTicksToWait );
+size_t MPU_xStreamBufferSendFromISR( StreamBufferHandle_t xStreamBuffer, const void *pvTxData, size_t xDataLengthBytes, BaseType_t * const pxHigherPriorityTaskWoken );
+size_t MPU_xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer, void *pvRxData, size_t xBufferLengthBytes, TickType_t xTicksToWait );
+size_t MPU_xStreamBufferReceiveFromISR( StreamBufferHandle_t xStreamBuffer, void *pvRxData, size_t xBufferLengthBytes, BaseType_t * const pxHigherPriorityTaskWoken );
+void MPU_vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer );
+BaseType_t MPU_xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer );
+BaseType_t MPU_xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer );
+BaseType_t MPU_xStreamBufferReset( StreamBufferHandle_t xStreamBuffer );
+size_t MPU_xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer );
+size_t MPU_xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer );
+BaseType_t MPU_xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer, size_t xTriggerLevel );
+StreamBufferHandle_t MPU_xStreamBufferGenericCreate( size_t xBufferSizeBytes, size_t xTriggerLevelBytes, BaseType_t xIsMessageBuffer );
+StreamBufferHandle_t MPU_xStreamBufferGenericCreateStatic( size_t xBufferSizeBytes, size_t xTriggerLevelBytes, BaseType_t xIsMessageBuffer, uint8_t * const pucStreamBufferStorageArea, StaticStreamBuffer_t * const pxStaticStreamBuffer );
+
+
+
 #endif /* MPU_PROTOTYPES_H */
 

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_wrappers.h

@@ -1,71 +1,29 @@
 /*
-    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
-
-    ***************************************************************************
-    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
-    >>!   distribute a combined work that includes FreeRTOS without being   !<<
-    >>!   obliged to provide the source code for proprietary components     !<<
-    >>!   outside of the FreeRTOS kernel.                                   !<<
-    ***************************************************************************
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
-    link: http://www.freertos.org/a00114.html
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that is more than just the market leader, it     *
-     *    is the industry's de facto standard.                               *
-     *                                                                       *
-     *    Help yourself get started quickly while simultaneously helping     *
-     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
-     *    tutorial book, reference manual, or both:                          *
-     *    http://www.FreeRTOS.org/Documentation                              *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
-    the FAQ page "My application does not run, what could be wrong?".  Have you
-    defined configASSERT()?
-
-    http://www.FreeRTOS.org/support - In return for receiving this top quality
-    embedded software for free we request you assist our global community by
-    participating in the support forum.
-
-    http://www.FreeRTOS.org/training - Investing in training allows your team to
-    be as productive as possible as early as possible.  Now you can receive
-    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
-    Ltd, and the world's leading authority on the world's leading RTOS.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
-    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
-    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and commercial middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
 
 #ifndef MPU_WRAPPERS_H
 #define MPU_WRAPPERS_H
@@ -130,7 +88,9 @@ only for ports that are using the MPU. */
 
 		/* Map standard queue.h API functions to the MPU equivalents. */
 		#define xQueueGenericSend						MPU_xQueueGenericSend
-		#define xQueueGenericReceive					MPU_xQueueGenericReceive
+		#define xQueueReceive							MPU_xQueueReceive
+		#define xQueuePeek								MPU_xQueuePeek
+		#define xQueueSemaphoreTake						MPU_xQueueSemaphoreTake
 		#define uxQueueMessagesWaiting					MPU_uxQueueMessagesWaiting
 		#define uxQueueSpacesAvailable					MPU_uxQueueSpacesAvailable
 		#define vQueueDelete							MPU_vQueueDelete
@@ -177,25 +137,34 @@ only for ports that are using the MPU. */
 		#define xEventGroupSync							MPU_xEventGroupSync
 		#define vEventGroupDelete						MPU_vEventGroupDelete
 
-		/* Remove the privileged function macro. */
+		/* Map standard message/stream_buffer.h API functions to the MPU
+		equivalents. */
+		#define xStreamBufferSend						MPU_xStreamBufferSend
+		#define xStreamBufferSendFromISR				MPU_xStreamBufferSendFromISR
+		#define xStreamBufferReceive					MPU_xStreamBufferReceive
+		#define xStreamBufferReceiveFromISR				MPU_xStreamBufferReceiveFromISR
+		#define vStreamBufferDelete						MPU_vStreamBufferDelete
+		#define xStreamBufferIsFull						MPU_xStreamBufferIsFull
+		#define xStreamBufferIsEmpty					MPU_xStreamBufferIsEmpty
+		#define xStreamBufferReset						MPU_xStreamBufferReset
+		#define xStreamBufferSpacesAvailable			MPU_xStreamBufferSpacesAvailable
+		#define xStreamBufferBytesAvailable				MPU_xStreamBufferBytesAvailable
+		#define xStreamBufferSetTriggerLevel			MPU_xStreamBufferSetTriggerLevel
+		#define xStreamBufferGenericCreate				MPU_xStreamBufferGenericCreate
+		#define xStreamBufferGenericCreateStatic		MPU_xStreamBufferGenericCreateStatic
+
+
+		/* Remove the privileged function macro, but keep the PRIVILEGED_DATA
+		macro so applications can place data in privileged access sections
+		(useful when using statically allocated objects). */
 		#define PRIVILEGED_FUNCTION
+		#define PRIVILEGED_DATA __attribute__((section("privileged_data")))
 
 	#else /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */
 
 		/* Ensure API functions go in the privileged execution section. */
-#if defined(__ICCARM__)
-
-#define PRIVILEGED_FUNCTION _Pragma("location= \"privileged_functions\"")
-#define PRIVILEGED_DATA     _Pragma("location= \"privileged_data\"")
-#define PRIVILEGED_INITIALIZED_DATA     _Pragma("location= \"privileged_initialized_data\"")
-
-#else
-
-#define PRIVILEGED_FUNCTION __attribute__((section("privileged_functions")))
-#define PRIVILEGED_DATA __attribute__((section("privileged_data")))
-#define PRIVILEGED_INITIALIZED_DATA PRIVILEGED_DATA
-
-#endif
+		#define PRIVILEGED_FUNCTION __attribute__((section("privileged_functions")))
+		#define PRIVILEGED_DATA __attribute__((section("privileged_data")))
 
 	#endif /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */
 
@@ -203,7 +172,6 @@ only for ports that are using the MPU. */
 
 	#define PRIVILEGED_FUNCTION
 	#define PRIVILEGED_DATA
-	#define PRIVILEGED_INITIALIZED_DATA
 	#define portUSING_MPU_WRAPPERS 0
 
 #endif /* portUSING_MPU_WRAPPERS */

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/include/portable.h

@@ -1,71 +1,29 @@
 /*
-    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
-
-    ***************************************************************************
-    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
-    >>!   distribute a combined work that includes FreeRTOS without being   !<<
-    >>!   obliged to provide the source code for proprietary components     !<<
-    >>!   outside of the FreeRTOS kernel.                                   !<<
-    ***************************************************************************
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
-    link: http://www.freertos.org/a00114.html
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that is more than just the market leader, it     *
-     *    is the industry's de facto standard.                               *
-     *                                                                       *
-     *    Help yourself get started quickly while simultaneously helping     *
-     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
-     *    tutorial book, reference manual, or both:                          *
-     *    http://www.FreeRTOS.org/Documentation                              *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
-    the FAQ page "My application does not run, what could be wrong?".  Have you
-    defined configASSERT()?
-
-    http://www.FreeRTOS.org/support - In return for receiving this top quality
-    embedded software for free we request you assist our global community by
-    participating in the support forum.
-
-    http://www.FreeRTOS.org/training - Investing in training allows your team to
-    be as productive as possible as early as possible.  Now you can receive
-    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
-    Ltd, and the world's leading authority on the world's leading RTOS.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
-    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
-    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and commercial middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
 
 /*-----------------------------------------------------------
  * Portable layer API.  Each function must be defined for each port.
@@ -139,9 +97,9 @@ extern "C" {
  *
  */
 #if( portUSING_MPU_WRAPPERS == 1 )
-	PRIVILEGED_FUNCTION StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged ) ;
+	StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged ) PRIVILEGED_FUNCTION;
 #else
-	PRIVILEGED_FUNCTION StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ) ;
+	StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ) PRIVILEGED_FUNCTION;
 #endif
 
 /* Used by heap_5.c. */
@@ -162,30 +120,30 @@ typedef struct HeapRegion
  * terminated by a HeapRegions_t structure that has a size of 0.  The region
  * with the lowest start address must appear first in the array.
  */
-PRIVILEGED_FUNCTION void vPortDefineHeapRegions( const HeapRegion_t * const pxHeapRegions );
+void vPortDefineHeapRegions( const HeapRegion_t * const pxHeapRegions ) PRIVILEGED_FUNCTION;
 
 
 /*
  * Map to the memory management routines required for the port.
  */
-PRIVILEGED_FUNCTION void *pvPortMalloc( size_t xSize );
-PRIVILEGED_FUNCTION void vPortFree( void *pv );
-PRIVILEGED_FUNCTION void vPortInitialiseBlocks( void );
-PRIVILEGED_FUNCTION size_t xPortGetFreeHeapSize( void );
-PRIVILEGED_FUNCTION size_t xPortGetMinimumEverFreeHeapSize( void );
+void *pvPortMalloc( size_t xSize ) PRIVILEGED_FUNCTION;
+void vPortFree( void *pv ) PRIVILEGED_FUNCTION;
+void vPortInitialiseBlocks( void ) PRIVILEGED_FUNCTION;
+size_t xPortGetFreeHeapSize( void ) PRIVILEGED_FUNCTION;
+size_t xPortGetMinimumEverFreeHeapSize( void ) PRIVILEGED_FUNCTION;
 
 /*
  * Setup the hardware ready for the scheduler to take control.  This generally
  * sets up a tick interrupt and sets timers for the correct tick frequency.
  */
-PRIVILEGED_FUNCTION BaseType_t xPortStartScheduler( void );
+BaseType_t xPortStartScheduler( void ) PRIVILEGED_FUNCTION;
 
 /*
  * Undo any hardware/ISR setup that was performed by xPortStartScheduler() so
  * the hardware is left in its original condition after the scheduler stops
  * executing.
  */
-PRIVILEGED_FUNCTION void vPortEndScheduler( void );
+void vPortEndScheduler( void ) PRIVILEGED_FUNCTION;
 
 /*
  * The structures and methods of manipulating the MPU are contained within the
@@ -196,7 +154,7 @@ PRIVILEGED_FUNCTION void vPortEndScheduler( void );
  */
 #if( portUSING_MPU_WRAPPERS == 1 )
 	struct xMEMORY_REGION;
-	PRIVILEGED_FUNCTION void vPortStoreTaskMPUSettings( xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION * const xRegions, StackType_t *pxBottomOfStack, uint32_t ulStackDepth );
+	void vPortStoreTaskMPUSettings( xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION * const xRegions, StackType_t *pxBottomOfStack, uint32_t ulStackDepth ) PRIVILEGED_FUNCTION;
 #endif
 
 #ifdef __cplusplus

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/include/projdefs.h

@@ -1,71 +1,29 @@
 /*
-    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
-
-    ***************************************************************************
-    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
-    >>!   distribute a combined work that includes FreeRTOS without being   !<<
-    >>!   obliged to provide the source code for proprietary components     !<<
-    >>!   outside of the FreeRTOS kernel.                                   !<<
-    ***************************************************************************
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
-    link: http://www.freertos.org/a00114.html
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that is more than just the market leader, it     *
-     *    is the industry's de facto standard.                               *
-     *                                                                       *
-     *    Help yourself get started quickly while simultaneously helping     *
-     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
-     *    tutorial book, reference manual, or both:                          *
-     *    http://www.FreeRTOS.org/Documentation                              *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
-    the FAQ page "My application does not run, what could be wrong?".  Have you
-    defined configASSERT()?
-
-    http://www.FreeRTOS.org/support - In return for receiving this top quality
-    embedded software for free we request you assist our global community by
-    participating in the support forum.
-
-    http://www.FreeRTOS.org/training - Investing in training allows your team to
-    be as productive as possible as early as possible.  Now you can receive
-    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
-    Ltd, and the world's leading authority on the world's leading RTOS.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
-    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
-    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and commercial middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
 
 #ifndef PROJDEFS_H
 #define PROJDEFS_H
@@ -152,8 +110,13 @@ itself. */
 
 /* The following endian values are used by FreeRTOS+ components, not FreeRTOS
 itself. */
-#define pdFREERTOS_LITTLE_ENDIAN	0
-#define pdFREERTOS_BIG_ENDIAN		1
+#define pdFREERTOS_LITTLE_ENDIAN		0
+#define pdFREERTOS_BIG_ENDIAN			1
+
+/* Re-defining endian values for generic naming. */
+#define pdLITTLE_ENDIAN					pdFREERTOS_LITTLE_ENDIAN
+#define pdBIG_ENDIAN					pdFREERTOS_BIG_ENDIAN
+
 
 #endif /* PROJDEFS_H */
 

Soft/STM32/Controle/Middlewares/Third_Party/FreeRTOS/Source/include/queue.h

@@ -1,71 +1,29 @@
 /*
-    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
-
-    ***************************************************************************
-    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
-    >>!   distribute a combined work that includes FreeRTOS without being   !<<
-    >>!   obliged to provide the source code for proprietary components     !<<
-    >>!   outside of the FreeRTOS kernel.                                   !<<
-    ***************************************************************************
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
-    link: http://www.freertos.org/a00114.html
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that is more than just the market leader, it     *
-     *    is the industry's de facto standard.                               *
-     *                                                                       *
-     *    Help yourself get started quickly while simultaneously helping     *
-     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
-     *    tutorial book, reference manual, or both:                          *
-     *    http://www.FreeRTOS.org/Documentation                              *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
-    the FAQ page "My application does not run, what could be wrong?".  Have you
-    defined configASSERT()?
-
-    http://www.FreeRTOS.org/support - In return for receiving this top quality
-    embedded software for free we request you assist our global community by
-    participating in the support forum.
-
-    http://www.FreeRTOS.org/training - Investing in training allows your team to
-    be as productive as possible as early as possible.  Now you can receive
-    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
-    Ltd, and the world's leading authority on the world's leading RTOS.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
-    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
-    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and commercial middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
 
 
 #ifndef QUEUE_H
@@ -282,8 +240,6 @@ typedef void * QueueSetMemberHandle_t;
 							   );
  * </pre>
  *
- * This is a macro that calls xQueueGenericSend().
- *
  * Post an item to the front of a queue.  The item is queued by copy, not by
  * reference.  This function must not be called from an interrupt service
  * routine.  See xQueueSendFromISR () for an alternative which may be used
@@ -689,19 +645,17 @@ typedef void * QueueSetMemberHandle_t;
  * \defgroup xQueueSend xQueueSend
  * \ingroup QueueManagement
  */
-PRIVILEGED_FUNCTION BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition );
+BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION;
 
 /**
  * queue. h
  * <pre>
  BaseType_t xQueuePeek(
 							 QueueHandle_t xQueue,
-							 void *pvBuffer,
+							 void * const pvBuffer,
 							 TickType_t xTicksToWait
 						 );</pre>
  *
- * This is a macro that calls the xQueueGenericReceive() function.
- *
  * Receive an item from a queue without removing the item from the queue.
  * The item is received by copy so a buffer of adequate size must be
  * provided.  The number of bytes copied into the buffer was defined when
@@ -782,10 +736,10 @@ PRIVILEGED_FUNCTION BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const vo
 	// ... Rest of task code.
  }
  </pre>
- * \defgroup xQueueReceive xQueueReceive
+ * \defgroup xQueuePeek xQueuePeek
  * \ingroup QueueManagement
  */
-#define xQueuePeek( xQueue, pvBuffer, xTicksToWait ) xQueueGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdTRUE )
+BaseType_t xQueuePeek( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
 
 /**
  * queue. h
@@ -818,7 +772,7 @@ PRIVILEGED_FUNCTION BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const vo
  * \defgroup xQueuePeekFromISR xQueuePeekFromISR
  * \ingroup QueueManagement
  */
-PRIVILEGED_FUNCTION BaseType_t xQueuePeekFromISR( QueueHandle_t xQueue, void * const pvBuffer );
+BaseType_t xQueuePeekFromISR( QueueHandle_t xQueue, void * const pvBuffer ) PRIVILEGED_FUNCTION;
 
 /**
  * queue. h
@@ -829,8 +783,6 @@ PRIVILEGED_FUNCTION BaseType_t xQueuePeekFromISR( QueueHandle_t xQueue, void * c
 								 TickType_t xTicksToWait
 							);</pre>
  *
- * This is a macro that calls the xQueueGenericReceive() function.
- *
  * Receive an item from a queue.  The item is received by copy so a buffer of
  * adequate size must be provided.  The number of bytes copied into the buffer
  * was defined when the queue was created.
@@ -911,106 +863,7 @@ PRIVILEGED_FUNCTION BaseType_t xQueuePeekFromISR( QueueHandle_t xQueue, void * c
  * \defgroup xQueueReceive xQueueReceive
  * \ingroup QueueManagement
  */
-#define xQueueReceive( xQueue, pvBuffer, xTicksToWait ) xQueueGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdFALSE )
-
-
-/**
- * queue. h
- * <pre>
- BaseType_t xQueueGenericReceive(
-									   QueueHandle_t	xQueue,
-									   void	*pvBuffer,
-									   TickType_t	xTicksToWait
-									   BaseType_t	xJustPeek
-									);</pre>
- *
- * It is preferred that the macro xQueueReceive() be used rather than calling
- * this function directly.
- *
- * Receive an item from a queue.  The item is received by copy so a buffer of
- * adequate size must be provided.  The number of bytes copied into the buffer
- * was defined when the queue was created.
- *
- * This function must not be used in an interrupt service routine.  See
- * xQueueReceiveFromISR for an alternative that can.
- *
- * @param xQueue The handle to the queue from which the item is to be
- * received.
- *
- * @param pvBuffer Pointer to the buffer into which the received item will
- * be copied.
- *
- * @param xTicksToWait The maximum amount of time the task should block
- * waiting for an item to receive should the queue be empty at the time
- * of the call.	 The time is defined in tick periods so the constant
- * portTICK_PERIOD_MS should be used to convert to real time if this is required.
- * xQueueGenericReceive() will return immediately if the queue is empty and
- * xTicksToWait is 0.
- *
- * @param xJustPeek When set to true, the item received from the queue is not
- * actually removed from the queue - meaning a subsequent call to
- * xQueueReceive() will return the same item.  When set to false, the item
- * being received from the queue is also removed from the queue.
- *
- * @return pdTRUE if an item was successfully received from the queue,
- * otherwise pdFALSE.
- *
- * Example usage:
-   <pre>
- struct AMessage
- {
-	char ucMessageID;
-	char ucData[ 20 ];
- } xMessage;
-
- QueueHandle_t xQueue;
-
- // Task to create a queue and post a value.
- void vATask( void *pvParameters )
- {
- struct AMessage *pxMessage;
-
-	// Create a queue capable of containing 10 pointers to AMessage structures.
-	// These should be passed by pointer as they contain a lot of data.
-	xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );
-	if( xQueue == 0 )
-	{
-		// Failed to create the queue.
-	}
-
-	// ...
-
-	// Send a pointer to a struct AMessage object.  Don't block if the
-	// queue is already full.
-	pxMessage = & xMessage;
-	xQueueSend( xQueue, ( void * ) &pxMessage, ( TickType_t ) 0 );
-
-	// ... Rest of task code.
- }
-
- // Task to receive from the queue.
- void vADifferentTask( void *pvParameters )
- {
- struct AMessage *pxRxedMessage;
-
-	if( xQueue != 0 )
-	{
-		// Receive a message on the created queue.  Block for 10 ticks if a
-		// message is not immediately available.
-		if( xQueueGenericReceive( xQueue, &( pxRxedMessage ), ( TickType_t ) 10 ) )
-		{
-			// pcRxedMessage now points to the struct AMessage variable posted
-			// by vATask.
-		}
-	}
-
-	// ... Rest of task code.
- }
- </pre>
- * \defgroup xQueueReceive xQueueReceive
- * \ingroup QueueManagement
- */
-PRIVILEGED_FUNCTION BaseType_t xQueueGenericReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait, const BaseType_t xJustPeek );
+BaseType_t xQueueReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
 
 /**
  * queue. h
@@ -1025,7 +878,7 @@ PRIVILEGED_FUNCTION BaseType_t xQueueGenericReceive( QueueHandle_t xQueue, void
  * \defgroup uxQueueMessagesWaiting uxQueueMessagesWaiting
  * \ingroup QueueManagement
  */
-PRIVILEGED_FUNCTION UBaseType_t uxQueueMessagesWaiting( const QueueHandle_t xQueue );
+UBaseType_t uxQueueMessagesWaiting( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
 
 /**
  * queue. h
@@ -1042,7 +895,7 @@ PRIVILEGED_FUNCTION UBaseType_t uxQueueMessagesWaiting( const QueueHandle_t xQue
  * \defgroup uxQueueMessagesWaiting uxQueueMessagesWaiting
  * \ingroup QueueManagement
  */
-PRIVILEGED_FUNCTION UBaseType_t uxQueueSpacesAvailable( const QueueHandle_t xQueue );
+UBaseType_t uxQueueSpacesAvailable( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
 
 /**
  * queue. h
@@ -1056,7 +909,7 @@ PRIVILEGED_FUNCTION UBaseType_t uxQueueSpacesAvailable( const QueueHandle_t xQue
  * \defgroup vQueueDelete vQueueDelete
  * \ingroup QueueManagement
  */
-PRIVILEGED_FUNCTION void vQueueDelete( QueueHandle_t xQueue );
+void vQueueDelete( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
 
 /**
  * queue. h
@@ -1437,8 +1290,8 @@ uint32_t ulVarToSend, ulValReceived;
  * \defgroup xQueueSendFromISR xQueueSendFromISR
  * \ingroup QueueManagement
  */
-PRIVILEGED_FUNCTION BaseType_t xQueueGenericSendFromISR( QueueHandle_t xQueue, const void * const pvItemToQueue, BaseType_t * const pxHigherPriorityTaskWoken, const BaseType_t xCopyPosition );
-PRIVILEGED_FUNCTION BaseType_t xQueueGiveFromISR( QueueHandle_t xQueue, BaseType_t * const pxHigherPriorityTaskWoken );
+BaseType_t xQueueGenericSendFromISR( QueueHandle_t xQueue, const void * const pvItemToQueue, BaseType_t * const pxHigherPriorityTaskWoken, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueGiveFromISR( QueueHandle_t xQueue, BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
 
 /**
  * queue. h
@@ -1527,15 +1380,15 @@ PRIVILEGED_FUNCTION BaseType_t xQueueGiveFromISR( QueueHandle_t xQueue, BaseType
  * \defgroup xQueueReceiveFromISR xQueueReceiveFromISR
  * \ingroup QueueManagement
  */
-PRIVILEGED_FUNCTION BaseType_t xQueueReceiveFromISR( QueueHandle_t xQueue, void * const pvBuffer, BaseType_t * const pxHigherPriorityTaskWoken );
+BaseType_t xQueueReceiveFromISR( QueueHandle_t xQueue, void * const pvBuffer, BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
 
 /*
  * Utilities to query queues that are safe to use from an ISR.  These utilities
  * should be used only from witin an ISR, or within a critical section.
  */
-PRIVILEGED_FUNCTION BaseType_t xQueueIsQueueEmptyFromISR( const QueueHandle_t xQueue );
-PRIVILEGED_FUNCTION BaseType_t xQueueIsQueueFullFromISR( const QueueHandle_t xQueue );
-PRIVILEGED_FUNCTION UBaseType_t uxQueueMessagesWaitingFromISR( const QueueHandle_t xQueue );
+BaseType_t xQueueIsQueueEmptyFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueIsQueueFullFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+UBaseType_t uxQueueMessagesWaitingFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
 
 /*
  * The functions defined above are for passing data to and from tasks.  The
@@ -1556,18 +1409,20 @@ BaseType_t xQueueCRReceive( QueueHandle_t xQueue, void *pvBuffer, TickType_t xTi
  * xSemaphoreCreateCounting() or xSemaphoreGetMutexHolder() instead of calling
  * these functions directly.
  */
-PRIVILEGED_FUNCTION QueueHandle_t xQueueCreateMutex( const uint8_t ucQueueType );
-PRIVILEGED_FUNCTION QueueHandle_t xQueueCreateMutexStatic( const uint8_t ucQueueType, StaticQueue_t *pxStaticQueue );
-PRIVILEGED_FUNCTION QueueHandle_t xQueueCreateCountingSemaphore( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount );
-PRIVILEGED_FUNCTION QueueHandle_t xQueueCreateCountingSemaphoreStatic( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount, StaticQueue_t *pxStaticQueue );
-PRIVILEGED_FUNCTION void* xQueueGetMutexHolder( QueueHandle_t xSemaphore );
+QueueHandle_t xQueueCreateMutex( const uint8_t ucQueueType ) PRIVILEGED_FUNCTION;
+QueueHandle_t xQueueCreateMutexStatic( const uint8_t ucQueueType, StaticQueue_t *pxStaticQueue ) PRIVILEGED_FUNCTION;
+QueueHandle_t xQueueCreateCountingSemaphore( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount ) PRIVILEGED_FUNCTION;
+QueueHandle_t xQueueCreateCountingSemaphoreStatic( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount, StaticQueue_t *pxStaticQueue ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueSemaphoreTake( QueueHandle_t xQueue, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+void* xQueueGetMutexHolder( QueueHandle_t xSemaphore ) PRIVILEGED_FUNCTION;
+void* xQueueGetMutexHolderFromISR( QueueHandle_t xSemaphore ) PRIVILEGED_FUNCTION;
 
 /*
  * For internal use only.  Use xSemaphoreTakeMutexRecursive() or
  * xSemaphoreGiveMutexRecursive() instead of calling these functions directly.
  */
-PRIVILEGED_FUNCTION BaseType_t xQueueTakeMutexRecursive( QueueHandle_t xMutex, TickType_t xTicksToWait );
-PRIVILEGED_FUNCTION BaseType_t xQueueGiveMutexRecursive( QueueHandle_t pxMutex );
+BaseType_t xQueueTakeMutexRecursive( QueueHandle_t xMutex, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueGiveMutexRecursive( QueueHandle_t pxMutex ) PRIVILEGED_FUNCTION;
 
 /*
  * Reset a queue back to its original empty state.  The return value is now
@@ -1598,7 +1453,7 @@ PRIVILEGED_FUNCTION BaseType_t xQueueGiveMutexRecursive( QueueHandle_t pxMutex )
  * preferably in ROM/Flash), not on the stack.
  */
 #if( configQUEUE_REGISTRY_SIZE > 0 )
-	PRIVILEGED_FUNCTION void vQueueAddToRegistry( QueueHandle_t xQueue, const char *pcName ); /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	void vQueueAddToRegistry( QueueHandle_t xQueue, const char *pcName ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
 #endif
 
 /*
@@ -1612,7 +1467,7 @@ PRIVILEGED_FUNCTION BaseType_t xQueueGiveMutexRecursive( QueueHandle_t pxMutex )
  * @param xQueue The handle of the queue being removed from the registry.
  */
 #if( configQUEUE_REGISTRY_SIZE > 0 )
-	PRIVILEGED_FUNCTION void vQueueUnregisterQueue( QueueHandle_t xQueue );
+	void vQueueUnregisterQueue( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
 #endif
 
 /*
@@ -1627,7 +1482,7 @@ PRIVILEGED_FUNCTION BaseType_t xQueueGiveMutexRecursive( QueueHandle_t pxMutex )
  * returned.
  */
 #if( configQUEUE_REGISTRY_SIZE > 0 )
-	PRIVILEGED_FUNCTION const char *pcQueueGetName( QueueHandle_t xQueue ); /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	const char *pcQueueGetName( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
 #endif
 
 /*
@@ -1636,7 +1491,7 @@ PRIVILEGED_FUNCTION BaseType_t xQueueGiveMutexRecursive( QueueHandle_t pxMutex )
  * RTOS objects that use the queue structure as their base.
  */
 #if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
-	PRIVILEGED_FUNCTION QueueHandle_t xQueueGenericCreate( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, const uint8_t ucQueueType );
+	QueueHandle_t xQueueGenericCreate( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, const uint8_t ucQueueType ) PRIVILEGED_FUNCTION;
 #endif
 
 /*
@@ -1645,7 +1500,7 @@ PRIVILEGED_FUNCTION BaseType_t xQueueGiveMutexRecursive( QueueHandle_t pxMutex )
  * RTOS objects that use the queue structure as their base.
  */
 #if( configSUPPORT_STATIC_ALLOCATION == 1 )
-	PRIVILEGED_FUNCTION QueueHandle_t xQueueGenericCreateStatic( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, StaticQueue_t *pxStaticQueue, const uint8_t ucQueueType );
+	QueueHandle_t xQueueGenericCreateStatic( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, StaticQueue_t *pxStaticQueue, const uint8_t ucQueueType ) PRIVILEGED_FUNCTION;
 #endif
 
 /*
@@ -1696,7 +1551,7 @@ PRIVILEGED_FUNCTION BaseType_t xQueueGiveMutexRecursive( QueueHandle_t pxMutex )
  * @return If the queue set is created successfully then a handle to the created
  * queue set is returned.  Otherwise NULL is returned.
  */
-PRIVILEGED_FUNCTION QueueSetHandle_t xQueueCreateSet( const UBaseType_t uxEventQueueLength );
+QueueSetHandle_t xQueueCreateSet( const UBaseType_t uxEventQueueLength ) PRIVILEGED_FUNCTION;
 
 /*
  * Adds a queue or semaphore to a queue set that was previously created by a
@@ -1720,7 +1575,7 @@ PRIVILEGED_FUNCTION QueueSetHandle_t xQueueCreateSet( const UBaseType_t uxEventQ
  * queue set because it is already a member of a different queue set then pdFAIL
  * is returned.
  */
-PRIVILEGED_FUNCTION BaseType_t xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet );
+BaseType_t xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION;
 
 /*
  * Removes a queue or semaphore from a queue set.  A queue or semaphore can only
@@ -1739,7 +1594,7 @@ PRIVILEGED_FUNCTION BaseType_t xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSe
  * then pdPASS is returned.  If the queue was not in the queue set, or the
  * queue (or semaphore) was not empty, then pdFAIL is returned.
  */
-PRIVILEGED_FUNCTION BaseType_t xQueueRemoveFromSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet );
+BaseType_t xQueueRemoveFromSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION;
 
 /*
  * xQueueSelectFromSet() selects from the members of a queue set a queue or
@@ -1775,19 +1630,19 @@ PRIVILEGED_FUNCTION BaseType_t xQueueRemoveFromSet( QueueSetMemberHandle_t xQueu
  * in the queue set that is available, or NULL if no such queue or semaphore
  * exists before before the specified block time expires.
  */
-PRIVILEGED_FUNCTION QueueSetMemberHandle_t xQueueSelectFromSet( QueueSetHandle_t xQueueSet, const TickType_t xTicksToWait );
+QueueSetMemberHandle_t xQueueSelectFromSet( QueueSetHandle_t xQueueSet, const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
 
 /*
  * A version of xQueueSelectFromSet() that can be used from an ISR.
  */
-PRIVILEGED_FUNCTION QueueSetMemberHandle_t xQueueSelectFromSetFromISR( QueueSetHandle_t xQueueSet );
+QueueSetMemberHandle_t xQueueSelectFromSetFromISR( QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION;
 
 /* Not public API functions. */
-PRIVILEGED_FUNCTION void vQueueWaitForMessageRestricted( QueueHandle_t xQueue, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely ) ;
-PRIVILEGED_FUNCTION BaseType_t xQueueGenericReset( QueueHandle_t xQueue, BaseType_t xNewQueue );
-PRIVILEGED_FUNCTION void vQueueSetQueueNumber( QueueHandle_t xQueue, UBaseType_t uxQueueNumber );
-PRIVILEGED_FUNCTION UBaseType_t uxQueueGetQueueNumber( QueueHandle_t xQueue );
-PRIVILEGED_FUNCTION uint8_t ucQueueGetQueueType( QueueHandle_t xQueue );
+void vQueueWaitForMessageRestricted( QueueHandle_t xQueue, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueGenericReset( QueueHandle_t xQueue, BaseType_t xNewQueue ) PRIVILEGED_FUNCTION;
+void vQueueSetQueueNumber( QueueHandle_t xQueue, UBaseType_t uxQueueNumber ) PRIVILEGED_FUNCTION;
+UBaseType_t uxQueueGetQueueNumber( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+uint8_t ucQueueGetQueueType( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
 
 
 #ifdef __cplusplus