Mise en essai de la V1.0 du soft sur l'aquarium Zoanthus

Eda/Proc/fp-info-cache

@@ -1 +1,589 @@
+139798850082937
+Bornier
+Bornier2.54_1x2
+
+
 0
+2
+2
+Bornier
+Bornier2.54_1x3
+
+
+0
+3
+3
+Bornier
+Bornier2.54_1x4
+
+
+0
+4
+4
+Bornier
+Bornier2.54_1x6
+
+
+0
+6
+6
+Bornier
+Bornier5.08_1X4
+
+
+0
+4
+4
+Bornier
+Bornier5_1x2
+
+
+0
+2
+2
+Bornier
+Bornier5_1x3
+Terminal block 3 pins
+DEV
+0
+3
+3
+C
+0603
+
+
+0
+2
+2
+C
+0805
+
+
+0
+2
+2
+C
+1206
+
+
+0
+2
+2
+C
+2312_P
+
+
+0
+2
+2
+C
+3216-18
+
+
+0
+2
+2
+C
+CP_CMS4X5.8
+
+
+0
+2
+2
+C
+CP_CMS5X5.8
+
+
+0
+2
+2
+Connector
+BNC
+
+
+0
+5
+2
+Connector
+CR1220
+
+
+0
+2
+2
+Connector
+DC_Jack
+
+
+0
+3
+2
+Connector
+LEDPCB
+
+
+0
+5
+5
+Connector
+LEDPCB2
+
+
+0
+5
+5
+Connector
+Micro-USB
+
+
+0
+9
+6
+Connector
+U.FL-R-SMT
+
+
+0
+3
+1
+Connector_Phoenix_MSTBO
+PCBEdge_1x1_6x3mm
+
+
+0
+2
+1
+Connector_Phoenix_MSTBO
+PCBEdge_1x4_7.6x1.5mm_p1.9mm_2pins
+
+
+0
+8
+2
+Connector_Phoenix_MSTBO
+PCBEdge_1x10_5.7x2.21mm_p3.81mm
+
+
+0
+20
+10
+Connector_Phoenix_MSTBO
+PhoenixContact_MSTBO_2,5_4-G1L_1x4_p5.00mm
+MSTBO 2,5 G1L 1x4 p5.00mm
+Connector Phoenix Contact MSTBO G1L
+0
+4
+4
+Connector_Phoenix_MSTBO
+PhoenixContact_MSTBO_2,5_4-G1R_1x4_p5.00mm
+MSTBO 2,5 G1R 1x4 p5.00mm
+Connector Phoenix Contact MSTBO G1R
+0
+4
+4
+D
+SMA
+
+
+0
+2
+2
+D
+SOD-123
+
+
+0
+2
+2
+D
+SOD-523
+
+
+0
+2
+2
+Jumper
+Jumper3X250V
+
+
+0
+3
+3
+Jumper
+SolderStrap2.5mm
+
+
+0
+2
+2
+Jumper
+SolderStrap0603
+
+
+0
+2
+2
+L
+0805
+
+
+0
+2
+2
+LED
+7segment_3
+
+
+0
+12
+12
+LED
+0805
+
+
+0
+2
+2
+LED
+COB5730
+
+
+0
+3
+2
+LED
+Osram
+
+
+0
+3
+2
+Logo
+R
+
+
+0
+0
+0
+MH
+MH2mm
+module Non Plated Through Hole
+DEV
+0
+0
+0
+MH
+MH2mm8
+module Non Plated Through Hole
+DEV
+0
+0
+0
+MH
+MH2mm69
+
+
+0
+0
+0
+MH
+MH3mm
+module Non Plated Through Hole
+DEV
+0
+0
+0
+MH
+MH3mm5
+module Non Plated Through Hole
+DEV
+0
+0
+0
+MH
+MH4.8
+
+
+0
+0
+0
+MH
+MH4mm
+
+
+0
+0
+0
+MH
+MH_5mm
+
+
+0
+0
+0
+Module
+ESP-12F
+
+
+0
+22
+22
+Module
+NEO-7
+
+
+0
+24
+24
+PinHeader
+JST_2.54_4
+
+
+0
+4
+4
+PinHeader
+JST_2.54_4_coude
+
+
+0
+4
+4
+PinHeader
+PinHeader2.54_1X2
+
+
+0
+2
+2
+PinHeader
+PinHeader2.54_1X3
+
+
+0
+3
+3
+PinHeader
+PinHeader2.54_1X5
+
+
+0
+5
+5
+PinHeader
+PinHeader2.54_1X6
+
+
+0
+6
+6
+PinHeader
+PinHeader2.54_1X16
+
+
+0
+16
+16
+R
+0603
+
+
+0
+2
+2
+R
+0805
+
+
+0
+2
+2
+R
+1206
+
+
+0
+2
+2
+R
+1210
+
+
+0
+2
+2
+R
+1218
+
+
+0
+2
+2
+R
+3296
+
+
+0
+3
+3
+R
+5329
+
+
+0
+2
+2
+R
+RM065
+
+
+0
+3
+3
+R
+ciment
+
+
+0
+2
+2
+R
+ciment_SMD
+
+
+0
+2
+2
+SW
+4.5mmX4.5mm
+
+
+0
+4
+2
+SW
+1812
+
+
+0
+2
+2
+SW
+MT-008a
+
+
+0
+6
+6
+SW
+SK12D07VG4
+
+
+0
+5
+3
+U
+DIP8
+
+
+0
+8
+8
+U
+LQFP48
+
+
+0
+48
+48
+U
+LQFP64
+
+
+0
+64
+64
+U
+PDIP16
+
+
+0
+16
+16
+U
+SO8N
+
+
+0
+8
+8
+U
+SO16S
+
+
+0
+16
+16
+U
+SO18W
+
+
+0
+18
+18
+U
+SOT-223
+
+
+0
+4
+3
+U
+SOT23-3
+
+
+0
+3
+3
+U
+SOT23-5
+
+
+0
+5
+5
+U
+TO-252
+
+
+0
+3
+3
+U
+TSOT23-5L
+
+
+0
+5
+5
+Y
+5032
+
+
+0
+2
+2
+relay
+G6K-2F
+
+
+0
+8
+8
+relay
+SRD-XXVDC-SL-C
+
+
+0
+5
+5

Eda/Proc/proc.kicad_pcb

@@ -410,11 +410,11 @@
     (at 154.5 85.5 90)
     (path "/00000000-0000-0000-0000-000057e3bdff")
     (attr through_hole)
-    (fp_text reference "U2" (at 3.5 0.05 180) (layer "F.SilkS")
+    (fp_text reference "U2" (at 3.5 0.05) (layer "F.SilkS")
       (effects (font (size 0.75 0.75) (thickness 0.15)))
       (tstamp b076d6bf-4f74-462c-a978-48bbcab1e3cb)
     )
-    (fp_text value "M24C32" (at 3.45 0 180) (layer "F.Fab")
+    (fp_text value "M24C32" (at 3.45 0) (layer "F.Fab")
       (effects (font (size 1 1) (thickness 0.15)))
       (tstamp 3c532f2a-a533-4685-93a6-d4554e46b316)
     )
@@ -424,21 +424,21 @@
     (fp_line (start -2.5 -1.75) (end 2.5 -1.75) (layer "F.SilkS") (width 0.15) (tstamp cb5e6030-de2f-4fed-b483-4c6aeb364612))
     (fp_line (start 2.5 -1.75) (end 2.5 1.75) (layer "F.SilkS") (width 0.15) (tstamp fd5ff243-6fae-4f3c-8852-30cafa75452d))
     (fp_circle (center -1.95 1.35) (end -1.95 1.55) (layer "F.SilkS") (width 0.15) (fill none) (tstamp 67d09d98-8d2d-401e-b5c0-86c091229352))
-    (pad "1" smd rect locked (at -1.905 2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
+    (pad "1" smd rect (at -1.905 2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
       (net 2 "/GND") (tstamp 0e5e1dbe-08da-4384-8627-d88e69608ee0))
-    (pad "2" smd rect locked (at -0.7 2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
+    (pad "2" smd rect (at -0.7 2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
       (net 2 "/GND") (tstamp edc28c63-7db3-4b85-a622-6b1a7d73d054))
-    (pad "3" smd rect locked (at 0.635 2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
+    (pad "3" smd rect (at 0.635 2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
       (net 2 "/GND") (tstamp 643a5f8a-f7bb-4740-aadd-d6dfc70f74ce))
-    (pad "4" smd rect locked (at 1.905 2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
+    (pad "4" smd rect (at 1.905 2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
       (net 2 "/GND") (tstamp 195b8f74-90f8-41ac-9eb9-8c069da4e011))
-    (pad "5" smd rect locked (at 1.905 -2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
+    (pad "5" smd rect (at 1.905 -2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
       (net 62 "/3.3V") (tstamp 7ff6f7c9-0011-49b7-aa9c-c5d9e4a940d4))
-    (pad "6" smd rect locked (at 0.635 -2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
+    (pad "6" smd rect (at 0.635 -2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
       (net 13 "/wc") (tstamp 93bc32d9-c55c-4c43-ba77-db0f50e2902b))
-    (pad "7" smd rect locked (at -0.635 -2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
+    (pad "7" smd rect (at -0.635 -2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
       (net 11 "/sdl") (tstamp 1402e965-a8cd-4b79-855f-b4bacd8a69ca))
-    (pad "8" smd rect locked (at -1.905 -2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
+    (pad "8" smd rect (at -1.905 -2.65 90) (size 0.6 1.4) (layers "F.Cu" "F.Paste" "F.Mask")
       (net 12 "/sda") (tstamp d1d89df5-0629-4e24-8daf-b873b6c80ccf))
   )
 
@@ -10697,7 +10697,7 @@
   (zone (net 0) (net_name "") (layer "F.Cu") (tstamp a92a2575-baf3-470d-92c5-aa1fb5cc85d9) (hatch none 0.508)
     (connect_pads (clearance 0))
     (min_thickness 0.254)
-    (keepout (tracks not_allowed) (vias not_allowed) (pads allowed ) (copperpour not_allowed) (footprints allowed))
+    (keepout (tracks not_allowed) (vias not_allowed) (pads allowed) (copperpour not_allowed) (footprints allowed))
     (fill (thermal_gap 0.508) (thermal_bridge_width 0.508))
     (polygon
       (pts
@@ -15798,7 +15798,7 @@
   (zone (net 0) (net_name "") (layer "B.Cu") (tstamp 92824357-0b8c-427f-a3d1-bfd283c414f2) (hatch edge 0.508)
     (connect_pads (clearance 0))
     (min_thickness 0.254)
-    (keepout (tracks not_allowed) (vias not_allowed) (pads allowed ) (copperpour not_allowed) (footprints allowed))
+    (keepout (tracks not_allowed) (vias not_allowed) (pads allowed) (copperpour not_allowed) (footprints allowed))
     (fill (thermal_gap 0.508) (thermal_bridge_width 0.508))
     (polygon
       (pts

Eda/Proc/proc.kicad_prl

@@ -38,6 +38,7 @@
       8,
       9,
       10,
+      11,
       12,
       13,
       14,
@@ -64,7 +65,7 @@
       36
     ],
     "visible_layers": "fffffff_ffffffff",
-    "zone_display_mode": 0
+    "zone_display_mode": 1
   },
   "meta": {
     "filename": "proc.kicad_prl",

Eda/Proc/proc.kicad_sch

@@ -3039,7 +3039,7 @@
     (property "Reference" "C6" (id 0) (at 270.51 28.575 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
-    (property "Value" "100nF" (id 1) (at 265.43 28.575 0)
+    (property "Value" "1µF" (id 1) (at 265.43 28.575 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
     (property "Footprint" "C:0805" (id 2) (at 264.16 28.9052 0)
@@ -3048,7 +3048,7 @@
     (property "Datasheet" "" (id 3) (at 267.97 27.94 0)
       (effects (font (size 1.27 1.27)) hide)
     )
-    (property "Partkeepr" "606" (id 4) (at 240.03 -238.76 0)
+    (property "Partkeepr" "0606" (id 4) (at 240.03 -238.76 0)
       (effects (font (size 1.27 1.27)) hide)
     )
     (pin "1" (uuid 5dc3cf1f-2e87-462f-a3a5-88066f97f3a1))
@@ -3059,14 +3059,14 @@
     (in_bom yes) (on_board yes)
     (uuid 00000000-0000-0000-0000-000057e50ded)
     (property "Reference" "R8" (id 0) (at 267.97 17.907 90))
-    (property "Value" "10K" (id 1) (at 267.97 15.875 90))
+    (property "Value" "100K" (id 1) (at 267.97 15.875 90))
     (property "Footprint" "R:0805" (id 2) (at 267.97 14.097 90)
       (effects (font (size 1.27 1.27)) hide)
     )
     (property "Datasheet" "" (id 3) (at 267.97 15.875 0)
       (effects (font (size 1.27 1.27)) hide)
     )
-    (property "Partkeepr" "910" (id 4) (at 252.095 -250.825 0)
+    (property "Partkeepr" "916" (id 4) (at 252.095 -250.825 0)
       (effects (font (size 1.27 1.27)) hide)
     )
     (pin "1" (uuid 83c7a9ab-f353-45d3-b3e9-93bfd7ac0988))
@@ -3874,7 +3874,7 @@
       (reference "C5") (unit 1) (value "10µF") (footprint "C:CP_CMS5X5.8")
     )
     (path "/00000000-0000-0000-0000-000057e50214"
-      (reference "C6") (unit 1) (value "100nF") (footprint "C:0805")
+      (reference "C6") (unit 1) (value "1µF") (footprint "C:0805")
     )
     (path "/00000000-0000-0000-0000-000057e518cc"
       (reference "C7") (unit 1) (value "100nF") (footprint "C:0805")
@@ -3985,7 +3985,7 @@
       (reference "R7") (unit 1) (value "330") (footprint "R:0805")
     )
     (path "/00000000-0000-0000-0000-000057e50ded"
-      (reference "R8") (unit 1) (value "10K") (footprint "R:0805")
+      (reference "R8") (unit 1) (value "100K") (footprint "R:0805")
     )
     (path "/00000000-0000-0000-0000-000057061f55"
       (reference "R9") (unit 1) (value "10K") (footprint "R:0805")

Soft/ESP12F/ESP12F.h

@@ -4,18 +4,24 @@
 
 #include <ESP8266WiFi.h>
 #include <BlynkSimpleEsp8266.h>
-#include <WidgetRTC.h>
 
-#define WRITETABHEU  0x00
+#define SIZEMES 8
+#define MASKMES 0xF0
+
+#define WRITETABHEU 0x00
 #define READTABHEU  0x10
 #define WRITETABVAL 0x20
 #define READTABVAL  0x30
-#define READVENT  0x40
-#define WRITVENT  0x50
+#define READVENT    0x40
+#define WRITVENT    0x50
 #define WRITEVALESS 0x60
-#define STOP    0x70
-#define ESSAI   0x80
-#define SYNCRTC   0x90
+#define STOP        0x70
+#define ESSAI       0x80
+#define SYNCRTC     0x90
+#define STATUS      0xA0
+
+//#define AQUAGRA
+//#define AQUAZOA
 
 /* **************************************************************
  *  Structur
@@ -34,7 +40,12 @@ typedef struct{
  *  Variable Connection
  ***************************************************************/
 // Token identification
-char auth[] = "gFZjB9gVdfUf6FyVza7XeURM6nboWLmD";
+
+#ifdef AQUAGRA
+  char auth[] = "HX49Gzw7ONpiPKKpdRZL8pIYVMPx7GO9"; //220L
+#elif AQUAZOA
+  char auth[] = "ZxEo9t9IFn2miwSOp10vFvaKd8Imn_UJ"; //70L
+#endif
 
 // Your WiFi credentials.
 char ssid[] = "Livebox-7C2C";
@@ -45,14 +56,14 @@ char pass[] = "566C61F61F9C925C9F3D7D79E6";
  ***************************************************************/
 Sortie TabSortie[10];
 
-BlynkTimer timer;
-WidgetRTC rtc;
+
 
 /* **************************************************************
  *  Fonction Perso
  ***************************************************************/
 uint8_t transmit(uint8_t *in, uint8_t nbTr, uint8_t *out);
-uint8_t uart_send(uint8_t *in, uint8_t nbTr, uint8_t *out)
+uint8_t uart_send(uint8_t *in, uint8_t nbTr, uint8_t *out);
 void SyncRTC();
+void Status();
 
 #endif

Soft/ESP12F/ESP12F.ino

@@ -2,14 +2,10 @@
 #include <WidgetRTC.h>
 
 
-
-/* **************************************************************
-  Fonction Perso
- ***************************************************************/
-#include "ESP12F.h"
-#include <WidgetRTC.h>
-
 WidgetTerminal terminal(V60);
+BlynkTimer timerRTC;
+BlynkTimer timerStatus;
+WidgetRTC rtc;
 
 /* **************************************************************
   Fonction Perso
@@ -37,9 +33,6 @@ uint8_t uart_send(uint8_t *in, uint8_t nbTr, uint8_t *out) {
 
   Serial.readBytes(out, SIZEMES);
 
-  terminal.print("out[1]");
-  terminal.println(out[1]);
-  terminal.flush();
 
   if (out[0] & MASKMES != in[0] & MASKMES) {
     terminal.print("erreur 2");
@@ -47,6 +40,11 @@ uint8_t uart_send(uint8_t *in, uint8_t nbTr, uint8_t *out) {
     return 2;
   }
 
+  
+  terminal.print("in[0] : ");
+  terminal.println(in[0]);
+  terminal.flush();
+
   return 0;
 }
 
@@ -54,36 +52,80 @@ uint8_t transmition(uint8_t *in, uint8_t nbTr, uint8_t *out) {
   return uart_send(in, nbTr, out);
 }
 
+void SyncRTC(){
+  uint8_t nbTr = 8;
+  uint8_t out[8];
+  uint8_t in[nbTr];
+  in[0]=SYNCRTC;
+  in[1]=year();
+  in[2]=month();
+  in[3]=day();
+  in[4]=5;
+  in[5]=hour();
+  in[6]=minute();
+  in[7]=second();
+  if (transmition(in, nbTr, out) == 0) {
+    //TODO erreur transmit
+  }
+}
+
+void Status(){
+  uint8_t nbTr = 1;
+  uint8_t out[8];
+  uint8_t in[nbTr];
+  in[0]=STATUS;
+  in[1]=
+  if (transmition(in, nbTr, out) == 0)  {
+    
+  }
+  switch(out[1]){
+    case 0:
+      //tous est ok
+      break;
+    case 1:
+      Blynk.syncAll();
+      SyncRTC();
+      break;
+  }
+}
 /* **************************************************************
     Fonction Arduino
  ***************************************************************/
 
 void setup() {
+  transmition(
+  
   Blynk.begin(auth, ssid, pass, IPAddress(192, 168, 1, 18), 8081);
-  timer.setInterval(1000L * 3600, SyncRTC); // une synchro de la RTC par heure
+  timerRTC.setInterval(1000L*3600, SyncRTC); // une synchro de la RTC par heure
+  timerStatus.setInterval(10000L, Status); // un status toute les 10 sec
   Serial.begin(115200);
 }
 
+
+
 void loop() {
   Blynk.run();
-  timer.run();
+  timerRTC.run();
+  timerStatus.run();
+
+  
  }
 
+ BLYNK_WRITE(V60){
+  Status();
+}
+
 /* **************************************************************
   Fonction Blynk
  ***************************************************************/
-
-BLYNK_CONNECTED() {
-  rtc.begin();
-}
-
+ 
 BLYNK_WRITE(V6) {
   uint8_t nbTr = 2;
   uint8_t out[8];
   uint8_t in[nbTr];
   in[0]=STOP;
   in[1]=param.asInt();
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -94,11 +136,16 @@ BLYNK_WRITE(V7) {
   uint8_t in[nbTr];
   in[0]=ESSAI;
   in[1]=param.asInt();
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
 
+
+BLYNK_CONNECTED() {
+  rtc.begin();
+}
+
 ///**********S0**********/
 
 //Max S0
@@ -110,7 +157,7 @@ BLYNK_WRITE(V10) {
   in[0]=WRITETABVAL;
   in[1]=0;
   in[2]=TabSortie[0].Max;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -121,10 +168,10 @@ BLYNK_WRITE(V20){
   uint8_t out[8];
   uint8_t in[nbTr];
   TabSortie[0].Pente = param.asInt();
-  in[0]=WRITETABVAL+0x80;
+  in[0]=WRITETABVAL;
   in[1]=0+0x80;
   in[2]=TabSortie[0].Pente;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -138,8 +185,8 @@ BLYNK_WRITE(V30){
   in[0] = WRITETABHEU;
   in[1] = 0;
   in[2] =TabSortie[0].HeureDem /60;
-  in[3] =TabSortie[0].HeureDem % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[0].HeureDem % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -153,8 +200,8 @@ BLYNK_WRITE(V40){
   in[0] = WRITETABHEU;
   in[1] = 0+0x80;
   in[2] =TabSortie[0].HeureArret / 60;
-  in[3] =TabSortie[0].HeureArret % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[0].HeureArret % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -164,12 +211,11 @@ BLYNK_WRITE(V50) {
   uint8_t nbTr = 4;
   uint8_t out[8];
   uint8_t in[nbTr];
-  TabSortie[0].Essai = param.asInt;
+  TabSortie[0].Essai = param.asInt();
   in[0] = WRITEVALESS;
   in[1] = 0;
-  in[2] =TabSortie[0].Essai / 60;
-  in[3] =TabSortie[0].Essai % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[2] = TabSortie[0].Essai;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -185,7 +231,7 @@ BLYNK_WRITE(V11) {
   in[0]=WRITETABVAL;
   in[1]=1;
   in[2]=TabSortie[1].Max;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -196,10 +242,10 @@ BLYNK_WRITE(V21){
   uint8_t out[8];
   uint8_t in[nbTr];
   TabSortie[1].Pente = param.asInt();
-  in[0]=WRITETABVAL+0x80;
+  in[0]=WRITETABVAL;
   in[1]=1+0x80;
   in[2]=TabSortie[1].Pente;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -213,8 +259,8 @@ BLYNK_WRITE(V31){
   in[0] = WRITETABHEU;
   in[1] = 1;
   in[2] =TabSortie[1].HeureDem /60;
-  in[3] =TabSortie[1].HeureDem % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[1].HeureDem % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -228,8 +274,8 @@ BLYNK_WRITE(V41){
   in[0] = WRITETABHEU;
   in[1] = 1+0x80;
   in[2] =TabSortie[1].HeureArret / 60;
-  in[3] =TabSortie[1].HeureArret % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[1].HeureArret % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -239,12 +285,11 @@ BLYNK_WRITE(V51) {
   uint8_t nbTr = 4;
   uint8_t out[8];
   uint8_t in[nbTr];
-  TabSortie[1].Essai = param.asInt;
+  TabSortie[1].Essai = param.asInt();
   in[0] = WRITEVALESS;
   in[1] = 1;
-  in[2] =TabSortie[1].Essai / 60;
-  in[3] =TabSortie[1].Essai % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[2] = TabSortie[1].Essai;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -260,7 +305,7 @@ BLYNK_WRITE(V12) {
   in[0]=WRITETABVAL;
   in[1]=2;
   in[2]=TabSortie[2].Max;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -271,10 +316,10 @@ BLYNK_WRITE(V22){
   uint8_t out[8];
   uint8_t in[nbTr];
   TabSortie[2].Pente = param.asInt();
-  in[0]=WRITETABVAL+0x80;
+  in[0]=WRITETABVAL;
   in[1]=2+0x80;
   in[2]=TabSortie[2].Pente;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -288,8 +333,8 @@ BLYNK_WRITE(V32){
   in[0] = WRITETABHEU;
   in[1] = 2;
   in[2] =TabSortie[2].HeureDem /60;
-  in[3] =TabSortie[2].HeureDem % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[2].HeureDem % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -303,8 +348,8 @@ BLYNK_WRITE(V42){
   in[0] = WRITETABHEU;
   in[1] = 2+0x80;
   in[2] =TabSortie[2].HeureArret / 60;
-  in[3] =TabSortie[2].HeureArret % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[2].HeureArret % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -314,12 +359,11 @@ BLYNK_WRITE(V52) {
   uint8_t nbTr = 4;
   uint8_t out[8];
   uint8_t in[nbTr];
-  TabSortie[2].Essai = param.asInt;
+  TabSortie[2].Essai = param.asInt();
   in[0] = WRITEVALESS;
   in[1] = 2;
-  in[2] =TabSortie[2].Essai / 60;
-  in[3] =TabSortie[2].Essai % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[2] =TabSortie[2].Essai;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -335,7 +379,7 @@ BLYNK_WRITE(V13) {
   in[0]=WRITETABVAL;
   in[1]=3;
   in[2]=TabSortie[3].Max;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -346,10 +390,10 @@ BLYNK_WRITE(V23){
   uint8_t out[8];
   uint8_t in[nbTr];
   TabSortie[3].Pente = param.asInt();
-  in[0]=WRITETABVAL+0x80;
+  in[0]=WRITETABVAL;
   in[1]=3+0x80;
   in[2]=TabSortie[3].Pente;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -363,8 +407,8 @@ BLYNK_WRITE(V33){
   in[0] = WRITETABHEU;
   in[1] = 3;
   in[2] =TabSortie[3].HeureDem /60;
-  in[3] =TabSortie[3].HeureDem % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[3].HeureDem % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -378,8 +422,8 @@ BLYNK_WRITE(V43){
   in[0] = WRITETABHEU;
   in[1] = 3+0x80;
   in[2] =TabSortie[3].HeureArret / 60;
-  in[3] =TabSortie[3].HeureArret % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[3].HeureArret % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -389,12 +433,11 @@ BLYNK_WRITE(V53) {
   uint8_t nbTr = 4;
   uint8_t out[8];
   uint8_t in[nbTr];
-  TabSortie[3].Essai = param.asInt;
+  TabSortie[3].Essai = param.asInt();
   in[0] = WRITEVALESS;
   in[1] = 3;
-  in[2] =TabSortie[3].Essai / 60;
-  in[3] =TabSortie[3].Essai % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[2] =TabSortie[3].Essai;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -410,7 +453,7 @@ BLYNK_WRITE(V14) {
   in[0]=WRITETABVAL;
   in[1]=4;
   in[2]=TabSortie[4].Max;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -421,10 +464,10 @@ BLYNK_WRITE(V24){
   uint8_t out[8];
   uint8_t in[nbTr];
   TabSortie[4].Pente = param.asInt();
-  in[0]=WRITETABVAL+0x80;
+  in[0]=WRITETABVAL;
   in[1]=4+0x80;
   in[2]=TabSortie[4].Pente;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -438,8 +481,8 @@ BLYNK_WRITE(V34){
   in[0] = WRITETABHEU;
   in[1] = 4;
   in[2] =TabSortie[4].HeureDem /60;
-  in[3] =TabSortie[4].HeureDem % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[4].HeureDem % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -453,8 +496,8 @@ BLYNK_WRITE(V44){
   in[0] = WRITETABHEU;
   in[1] = 4+0x80;
   in[2] =TabSortie[4].HeureArret / 60;
-  in[3] =TabSortie[4].HeureArret % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[4].HeureArret % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -464,12 +507,11 @@ BLYNK_WRITE(V54) {
   uint8_t nbTr = 4;
   uint8_t out[8];
   uint8_t in[nbTr];
-  TabSortie[4].Essai = param.asInt;
+  TabSortie[4].Essai = param.asInt();
   in[0] = WRITEVALESS;
   in[1] = 4;
-  in[2] =TabSortie[4].Essai / 60;
-  in[3] =TabSortie[4].Essai % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[2] =TabSortie[4].Essai;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -485,7 +527,7 @@ BLYNK_WRITE(V15) {
   in[0]=WRITETABVAL;
   in[1]=5;
   in[2]=TabSortie[5].Max;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -496,10 +538,10 @@ BLYNK_WRITE(V25){
   uint8_t out[8];
   uint8_t in[nbTr];
   TabSortie[5].Pente = param.asInt();
-  in[0]=WRITETABVAL+0x80;
+  in[0]=WRITETABVAL;
   in[1]=5+0x80;
   in[2]=TabSortie[5].Pente;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -513,8 +555,8 @@ BLYNK_WRITE(V35){
   in[0] = WRITETABHEU;
   in[1] = 5;
   in[2] =TabSortie[5].HeureDem /60;
-  in[3] =TabSortie[5].HeureDem % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[5].HeureDem % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -528,8 +570,8 @@ BLYNK_WRITE(V45){
   in[0] = WRITETABHEU;
   in[1] = 5+0x80;
   in[2] =TabSortie[5].HeureArret / 60;
-  in[3] =TabSortie[5].HeureArret % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[5].HeureArret % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -539,12 +581,11 @@ BLYNK_WRITE(V55) {
   uint8_t nbTr = 4;
   uint8_t out[8];
   uint8_t in[nbTr];
-  TabSortie[5].Essai = param.asInt;
+  TabSortie[5].Essai = param.asInt();
   in[0] = WRITEVALESS;
   in[1] = 5;
-  in[2] =TabSortie[5].Essai / 60;
-  in[3] =TabSortie[5].Essai % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[2] =TabSortie[5].Essai;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -560,7 +601,7 @@ BLYNK_WRITE(V16) {
   in[0]=WRITETABVAL;
   in[1]=6;
   in[2]=TabSortie[6].Max;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -571,10 +612,10 @@ BLYNK_WRITE(V26){
   uint8_t out[8];
   uint8_t in[nbTr];
   TabSortie[6].Pente = param.asInt();
-  in[0]=WRITETABVAL+0x80;
+  in[0]=WRITETABVAL;
   in[1]=6+0x80;
   in[2]=TabSortie[6].Pente;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -588,8 +629,8 @@ BLYNK_WRITE(V36){
   in[0] = WRITETABHEU;
   in[1] = 6;
   in[2] =TabSortie[6].HeureDem /60;
-  in[3] =TabSortie[6].HeureDem % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[6].HeureDem % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -603,8 +644,8 @@ BLYNK_WRITE(V46){
   in[0] = WRITETABHEU;
   in[1] = 6+0x80;
   in[2] =TabSortie[6].HeureArret / 60;
-  in[3] =TabSortie[6].HeureArret % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[6].HeureArret % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -614,12 +655,11 @@ BLYNK_WRITE(V56) {
   uint8_t nbTr = 4;
   uint8_t out[8];
   uint8_t in[nbTr];
-  TabSortie[6].Essai = param.asInt;
+  TabSortie[6].Essai = param.asInt();
   in[0] = WRITEVALESS;
   in[1] = 6;
-  in[2] =TabSortie[6].Essai / 60;
-  in[3] =TabSortie[6].Essai % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[2] =TabSortie[6].Essai;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -635,7 +675,7 @@ BLYNK_WRITE(V17) {
   in[0]=WRITETABVAL;
   in[1]=7;
   in[2]=TabSortie[7].Max;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -646,10 +686,10 @@ BLYNK_WRITE(V27){
   uint8_t out[8];
   uint8_t in[nbTr];
   TabSortie[7].Pente = param.asInt();
-  in[0]=WRITETABVAL+0x80;
+  in[0]=WRITETABVAL;
   in[1]=7+0x80;
   in[2]=TabSortie[7].Pente;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -663,8 +703,8 @@ BLYNK_WRITE(V37){
   in[0] = WRITETABHEU;
   in[1] = 7;
   in[2] =TabSortie[7].HeureDem /60;
-  in[3] =TabSortie[7].HeureDem % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[7].HeureDem % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -678,8 +718,8 @@ BLYNK_WRITE(V47){
   in[0] = WRITETABHEU;
   in[1] = 7+0x80;
   in[2] =TabSortie[7].HeureArret / 60;
-  in[3] =TabSortie[7].HeureArret % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[7].HeureArret % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -689,12 +729,11 @@ BLYNK_WRITE(V57) {
   uint8_t nbTr = 4;
   uint8_t out[8];
   uint8_t in[nbTr];
-  TabSortie[7].Essai = param.asInt;
+  TabSortie[7].Essai = param.asInt();
   in[0] = WRITEVALESS;
   in[1] = 7;
-  in[2] =TabSortie[7].Essai / 60;
-  in[3] =TabSortie[7].Essai % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[2] =TabSortie[7].Essai;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -710,7 +749,7 @@ BLYNK_WRITE(V18) {
   in[0]=WRITETABVAL;
   in[1]=8;
   in[2]=TabSortie[8].Max;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -721,10 +760,10 @@ BLYNK_WRITE(V28){
   uint8_t out[8];
   uint8_t in[nbTr];
   TabSortie[8].Pente = param.asInt();
-  in[0]=WRITETABVAL+0x80;
+  in[0]=WRITETABVAL;
   in[1]=8+0x80;
   in[2]=TabSortie[8].Pente;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -738,8 +777,8 @@ BLYNK_WRITE(V38){
   in[0] = WRITETABHEU;
   in[1] = 8;
   in[2] =TabSortie[8].HeureDem /60;
-  in[3] =TabSortie[8].HeureDem % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[8].HeureDem % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -753,8 +792,8 @@ BLYNK_WRITE(V48){
   in[0] = WRITETABHEU;
   in[1] = 8+0x80;
   in[2] =TabSortie[8].HeureArret / 60;
-  in[3] =TabSortie[8].HeureArret % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[8].HeureArret % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -764,12 +803,11 @@ BLYNK_WRITE(V58) {
   uint8_t nbTr = 4;
   uint8_t out[8];
   uint8_t in[nbTr];
-  TabSortie[8].Essai = param.asInt;
+  TabSortie[8].Essai = param.asInt();
   in[0] = WRITEVALESS;
   in[1] = 8;
-  in[2] =TabSortie[8].Essai / 60;
-  in[3] =TabSortie[8].Essai % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[2] =TabSortie[8].Essai;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -785,7 +823,7 @@ BLYNK_WRITE(V19) {
   in[0]=WRITETABVAL;
   in[1]=9;
   in[2]=TabSortie[9].Max;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -796,10 +834,10 @@ BLYNK_WRITE(V29){
   uint8_t out[8];
   uint8_t in[nbTr];
   TabSortie[9].Pente = param.asInt();
-  in[0]=WRITETABVAL+0x80;
+  in[0]=WRITETABVAL;
   in[1]=9+0x80;
   in[2]=TabSortie[9].Pente;
-  if (transmit(in, nbTr, out) == 0) {
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -813,8 +851,8 @@ BLYNK_WRITE(V39){
   in[0] = WRITETABHEU;
   in[1] = 9;
   in[2] =TabSortie[9].HeureDem /60;
-  in[3] =TabSortie[9].HeureDem % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[9].HeureDem % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -828,8 +866,8 @@ BLYNK_WRITE(V49){
   in[0] = WRITETABHEU;
   in[1] = 9+0x80;
   in[2] =TabSortie[9].HeureArret / 60;
-  in[3] =TabSortie[9].HeureArret % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[3] =TabSortie[9].HeureArret % 60;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }
@@ -839,12 +877,11 @@ BLYNK_WRITE(V59) {
   uint8_t nbTr = 4;
   uint8_t out[8];
   uint8_t in[nbTr];
-  TabSortie[9].Essai = param.asInt;
+  TabSortie[9].Essai = param.asInt();
   in[0] = WRITEVALESS;
   in[1] = 9;
-  in[2] =TabSortie[9].Essai / 60;
-  in[3] =TabSortie[9].Essai % 60
-  if (transmit(in, nbTr, out) == 0) {
+  in[2] =TabSortie[9].Essai;
+  if (transmition(in, nbTr, out) == 0) {
     //TODO erreur transmit
   }
 }

Soft/ESP12F/templateSortie.c

@@ -1,75 +0,0 @@
-//**********SX**********/
-
-//Max SX
-BLYNK_WRITE(V1X) {
-  uint8_t nbTr = 3;
-  uint8_t out[nbTr];
-  uint8_t send[nbTr];
-  TabSortie[X].Max = param.asInt();
-  send[0]=WRITETABVAL;
-  send[1]=X;
-  send[2]=TabSortie[X].Max;
-  if (transmit(in, nbTr, out) == 0) {
-    //TODO erreur transmit
-  }
-}
-
-//Pente SX
-BLYNK_WRITE(V2X){
-  uint8_t nbTr = 3;
-  uint8_t out[nbTr];
-  uint8_t send[nbTr];
-  TabSortie[X].Pente = param.asInt();
-  send[0]=WRITETABVAL+0x80;
-  send[1]=X+0x80;
-  send[2]=TabSortie[X].Pente;
-  if (transmit(in, nbTr, out) == 0) {
-    //TODO erreur transmit
-  }
-}
-
-//HeureDem SX
-BLYNK_WRITE(V3X){
-	uint8_t nbTr = 4;
-	uint8_t out[nbTr];
-	uint8_t send[nbTr];
-	TabSortie[X].HeureDem = param.asLong() / 60;
-	send[0] = WRITETABHEU;
-	send[1] = X;
-	send[2] =TabSortie[X].HeureDem /60;
-	send[3] =TabSortie[X].HeureDem % 60
-	if (transmit(in, nbTr, out) == 0) {
-		//TODO erreur transmit
-  }
-}
-
-//HeureArret SX
-BLYNK_WRITE(V4X){
-	uint8_t nbTr = 4;
-	uint8_t out[nbTr];
-	uint8_t send[nbTr];
-	TabSortie[X].HeureArret = param.asLong() / 60;
-	send[0] = WRITETABHEU;
-	send[1] = X+0x80;
-	send[2] =TabSortie[X].HeureArret / 60;
-	send[3] =TabSortie[X].HeureArret % 60
-	if (transmit(in, nbTr, out) == 0) {
-		//TODO erreur transmit
-  }
-}
-
-//Essai  SX
-BLYNK_WRITE(V5X) {
-	uint8_t nbTr = 4;
-	uint8_t out[nbTr];
-	uint8_t send[nbTr];
-	TabSortie[X].Essai = param.asInt;
-	send[0] = WRITEVALESS;
-	send[1] = X;
-	send[2] =TabSortie[X].Essai / 60;
-	send[3] =TabSortie[X].Essai % 60
-	if (transmit(in, nbTr, out) == 0) {
-		//TODO erreur transmit
-  }
-}
-

Soft/STM32/Controle/.cproject

@@ -1,219 +1,175 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
-	<storageModule moduleId="org.eclipse.cdt.core.settings">
-		<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.583918437">
-			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.583918437" moduleId="org.eclipse.cdt.core.settings" name="Debug">
-				<externalSettings/>
-				<extensions>
-					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
-					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-				</extensions>
-			</storageModule>
-			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.583918437" name="Debug" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug">
-					<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.583918437." name="/" resourcePath="">
-						<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug.1503621159" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug">
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.954943224" name="MCU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32F401RCTx" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.771913811" name="CPU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="0" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.1658576392" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.1791554871" name="Floating-point unit" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv4-sp-d16" valueType="enumerated"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.316770543" name="Floating-point ABI" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.853252964" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1186171227" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.5 || Debug || true || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || STM32F401RCTx || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Drivers/CMSIS/Include | ../Core/Inc | ../Drivers/STM32F4xx_HAL_Driver/Inc | ../Drivers/CMSIS/Device/ST/STM32F4xx/Include | ../Drivers/STM32F4xx_HAL_Driver/Inc/Legacy ||  ||  || USE_HAL_DRIVER | STM32F401xC ||  || Drivers | Core/Startup | Core ||  ||  || ${workspace_loc:/${ProjName}/STM32F401RCTX_FLASH.ld} || true || NonSecure ||  || secure_nsclib.o ||  || None || " valueType="string"/>
-							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.1046863482" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
-							<builder buildPath="${workspace_loc:/Controle}/Debug" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.1432909005" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.1327230387" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.814767521" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g3" valueType="enumerated"/>
-								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols.120531034" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols" valueType="definedSymbols">
-									<listOptionValue builtIn="false" value="DEBUG"/>
-								</option>
-								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths.1297140202" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths" valueType="includePath">
-									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/DriverSTM_RC/Include}&quot;"/>
-								</option>
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.1929131896" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.154214844" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.504650915" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.154561092" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false"/>
-								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.1098277070" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
-									<listOptionValue builtIn="false" value="DEBUG"/>
-									<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
-									<listOptionValue builtIn="false" value="STM32F401xC"/>
-								</option>
-								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.550302507" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
-									<listOptionValue builtIn="false" value="../Core/Inc"/>
-									<listOptionValue builtIn="false" value="../Drivers/STM32F4xx_HAL_Driver/Inc"/>
-									<listOptionValue builtIn="false" value="../Drivers/STM32F4xx_HAL_Driver/Inc/Legacy"/>
-									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F4xx/Include"/>
-									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
-									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/DriverSTM_RC/Include}&quot;"/>
-								</option>
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.308998960" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.2051918183" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.1914585783" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.1380681422" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.434407745" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.2097572527" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32F401RCTX_FLASH.ld}" valueType="string"/>
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.628992979" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
-									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
-									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
-								</inputType>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1486224657" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.614486850" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.299341831" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.85817859" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.677895335" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.1033211086" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.40417091" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.343079615" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.1014507289" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
-						</toolChain>
-					</folderInfo>
-					<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.583918437.438192851" name="/" resourcePath="DriverSTM_RC">
-						<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug.1624927803" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug" unusedChildren="">
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.954943224.585329902" name="MCU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.954943224"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.771913811.732431955" name="CPU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.771913811"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.1658576392.1403496222" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.1658576392"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.1791554871.1101211099" name="Floating-point unit" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.1791554871"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.316770543.1587087037" name="Floating-point ABI" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.316770543"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.853252964.2060798843" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.853252964"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1186171227.1748199262" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1186171227"/>
-							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.1910664397" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.1327230387">
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.251076410" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1859201253" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.154214844">
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.1467955003" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.87317076" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.2051918183"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.882765039" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.434407745"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1456819301" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1486224657"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.1190635467" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.614486850"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.772150449" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.299341831"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.1393436968" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.85817859"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.1948927178" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.677895335"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.235284145" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.1033211086"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1528250929" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.40417091"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.1502356755" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.343079615"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.1716825224" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.1014507289"/>
-						</toolChain>
-					</folderInfo>
-					<sourceEntries>
-						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
-						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
-					</sourceEntries>
-				</configuration>
-			</storageModule>
-			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
-		</cconfiguration>
-		<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1388812221">
-			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1388812221" moduleId="org.eclipse.cdt.core.settings" name="Release">
-				<externalSettings/>
-				<extensions>
-					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
-					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-				</extensions>
-			</storageModule>
-			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1388812221" name="Release" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release">
-					<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1388812221." name="/" resourcePath="">
-						<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release.141375248" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release">
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.432855354" name="MCU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32F401RCTx" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.1995672245" name="CPU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="0" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.238505884" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.1218167449" name="Floating-point unit" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv4-sp-d16" valueType="enumerated"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.308815113" name="Floating-point ABI" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.1789615412" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1545746795" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.5 || Release || false || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || STM32F401RCTx || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Drivers/CMSIS/Include | ../Core/Inc | ../Drivers/STM32F4xx_HAL_Driver/Inc | ../Drivers/CMSIS/Device/ST/STM32F4xx/Include | ../Drivers/STM32F4xx_HAL_Driver/Inc/Legacy ||  ||  || USE_HAL_DRIVER | STM32F401xC ||  || Drivers | Core/Startup | Core ||  ||  || ${workspace_loc:/${ProjName}/STM32F401RCTX_FLASH.ld} || true || NonSecure ||  || secure_nsclib.o ||  || None || " valueType="string"/>
-							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.943535354" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
-							<builder buildPath="${workspace_loc:/Controle}/Release" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.1543399092" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.328058688" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.1314987330" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g0" valueType="enumerated"/>
-								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths.1029724839" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths" valueType="includePath">
-									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/DriverSTM_RC/Include}&quot;"/>
-								</option>
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.890748465" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1731315189" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.1118827487" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.215572204" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.value.os" valueType="enumerated"/>
-								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.1482113223" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
-									<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
-									<listOptionValue builtIn="false" value="STM32F401xC"/>
-								</option>
-								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.1195138530" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
-									<listOptionValue builtIn="false" value="../Core/Inc"/>
-									<listOptionValue builtIn="false" value="../Drivers/STM32F4xx_HAL_Driver/Inc"/>
-									<listOptionValue builtIn="false" value="../Drivers/STM32F4xx_HAL_Driver/Inc/Legacy"/>
-									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F4xx/Include"/>
-									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
-									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/DriverSTM_RC/Include}&quot;"/>
-								</option>
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.1149149309" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.233253231" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.514367950" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.138019012" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.value.os" valueType="enumerated"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.1767169173" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.1387777605" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32F401RCTX_FLASH.ld}" valueType="string"/>
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.2070058018" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
-									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
-									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
-								</inputType>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.354832736" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.727424675" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.220709813" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.785998581" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.697974117" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.458538056" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1164330738" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.1049917112" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.1586716222" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
-						</toolChain>
-					</folderInfo>
-					<sourceEntries>
-						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
-						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
-					</sourceEntries>
-				</configuration>
-			</storageModule>
-			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
-		</cconfiguration>
-	</storageModule>
-	<storageModule moduleId="org.eclipse.cdt.core.pathentry"/>
-	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-		<project id="Controle.null.2134629260" name="Controle"/>
-	</storageModule>
-	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
-	<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
-	<storageModule moduleId="scannerConfiguration">
-		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
-		<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1388812221;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1388812221.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1731315189;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.1149149309">
-			<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
-		</scannerConfigBuildInfo>
-		<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.583918437;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.583918437.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.154214844;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.308998960">
-			<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
-		</scannerConfigBuildInfo>
-	</storageModule>
-	<storageModule moduleId="refreshScope" versionNumber="2">
-		<configuration configurationName="Debug">
-			<resource resourceType="PROJECT" workspacePath="/Controle"/>
-		</configuration>
-		<configuration configurationName="Release">
-			<resource resourceType="PROJECT" workspacePath="/Controle"/>
-		</configuration>
-	</storageModule>
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.845088936">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.845088936" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.845088936" name="Debug" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug">
+					<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.845088936." name="/" resourcePath="">
+						<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug.2108469959" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug">
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.856918969" name="MCU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32F401RCTx" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.1313716026" name="CPU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="0" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.616313568" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.624539781" name="Floating-point unit" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv4-sp-d16" valueType="enumerated"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.1407561553" name="Floating-point ABI" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.2102727446" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1827300225" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.5 || Debug || true || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || STM32F401RCTx || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Drivers/CMSIS/Include | ../Core/Inc | ../Drivers/STM32F4xx_HAL_Driver/Inc | ../Drivers/CMSIS/Device/ST/STM32F4xx/Include | ../Drivers/STM32F4xx_HAL_Driver/Inc/Legacy ||  ||  || USE_HAL_DRIVER | STM32F401xC ||  || Drivers | Core/Startup | Core ||  ||  || ${workspace_loc:/${ProjName}/STM32F401RCTX_FLASH.ld} || true || NonSecure ||  || secure_nsclib.o ||  || None || " valueType="string"/>
+							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.1130103577" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
+							<builder buildPath="${workspace_loc:/Controle}/Debug" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.1284960635" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.544363135" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.1568246088" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g3" valueType="enumerated"/>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols.1902285111" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols" valueType="definedSymbols">
+									<listOptionValue builtIn="false" value="DEBUG"/>
+								</option>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.784079722" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1825356169" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.1248576199" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.2053134991" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false"/>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.544312707" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
+									<listOptionValue builtIn="false" value="DEBUG"/>
+									<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
+									<listOptionValue builtIn="false" value="STM32F401xC"/>
+								</option>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.371353194" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
+									<listOptionValue builtIn="false" value="../Core/Inc"/>
+									<listOptionValue builtIn="false" value="../Drivers/STM32F4xx_HAL_Driver/Inc"/>
+									<listOptionValue builtIn="false" value="../Drivers/STM32F4xx_HAL_Driver/Inc/Legacy"/>
+									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F4xx/Include"/>
+									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
+								</option>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.2122364618" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.1728502010" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.1900201919" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.11936018" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false"/>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.1568872907" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.1268326183" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32F401RCTX_FLASH.ld}" valueType="string"/>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.417018113" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
+									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
+									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
+								</inputType>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1168673255" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.1479661306" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.217223081" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.1489716574" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.714293259" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.2142473225" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.356451962" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.71537835" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.1742823228" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
+						</toolChain>
+					</folderInfo>
+					<sourceEntries>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
+					</sourceEntries>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+		<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1567871435">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1567871435" moduleId="org.eclipse.cdt.core.settings" name="Release">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1567871435" name="Release" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release">
+					<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1567871435." name="/" resourcePath="">
+						<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release.442466015" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release">
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.1269527195" name="MCU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32F401RCTx" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.1527625421" name="CPU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="0" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.968054282" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.939532893" name="Floating-point unit" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv4-sp-d16" valueType="enumerated"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.312017525" name="Floating-point ABI" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.599454436" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.2010462294" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.5 || Release || false || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || STM32F401RCTx || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Drivers/CMSIS/Include | ../Core/Inc | ../Drivers/STM32F4xx_HAL_Driver/Inc | ../Drivers/CMSIS/Device/ST/STM32F4xx/Include | ../Drivers/STM32F4xx_HAL_Driver/Inc/Legacy ||  ||  || USE_HAL_DRIVER | STM32F401xC ||  || Drivers | Core/Startup | Core ||  ||  || ${workspace_loc:/${ProjName}/STM32F401RCTX_FLASH.ld} || true || NonSecure ||  || secure_nsclib.o ||  || None || " valueType="string"/>
+							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.972827830" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
+							<builder buildPath="${workspace_loc:/Controle}/Release" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.1330734756" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.865924058" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.750595529" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g0" valueType="enumerated"/>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.877920740" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1591075429" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.248960013" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.157406448" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.value.o3" valueType="enumerated"/>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.514935477" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
+									<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
+									<listOptionValue builtIn="false" value="STM32F401xC"/>
+								</option>
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.1495254565" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
+									<listOptionValue builtIn="false" value="../Core/Inc"/>
+									<listOptionValue builtIn="false" value="../Drivers/STM32F4xx_HAL_Driver/Inc"/>
+									<listOptionValue builtIn="false" value="../Drivers/STM32F4xx_HAL_Driver/Inc/Legacy"/>
+									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F4xx/Include"/>
+									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
+								</option>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.904062270" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.686834928" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.1451444838" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.1654461069" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.value.os" valueType="enumerated"/>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.120383796" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
+								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.450497528" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32F401RCTX_FLASH.ld}" valueType="string"/>
+								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.591525504" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
+									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
+									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
+								</inputType>
+							</tool>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1462255149" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.466533977" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.1116376700" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.1013279824" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.2076205274" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.1922982060" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1583222862" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.1624039177" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
+							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.1929541971" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
+						</toolChain>
+					</folderInfo>
+					<sourceEntries>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
+					</sourceEntries>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.pathentry"/>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="Controle.null.1089965076" name="Controle"/>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.845088936;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.845088936.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1825356169;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.2122364618">
+			<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
+		</scannerConfigBuildInfo>
+		<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1567871435;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1567871435.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1591075429;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.904062270">
+			<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="refreshScope"/>
 </cproject>

Soft/STM32/Controle/.project

@@ -29,11 +29,4 @@
 		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
 		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
 	</natures>
-	<linkedResources>
-		<link>
-			<name>DriverSTM_RC</name>
-			<type>2</type>
-			<locationURI>PARENT-4-PROJECT_LOC/DriverSTM_RC</locationURI>
-		</link>
-	</linkedResources>
 </projectDescription>

Soft/STM32/Controle/.settings/language.settings.xml

@@ -1,24 +1,24 @@
 <?xml version="1.0" encoding="UTF-8" standalone="no"?>
 <project>
-	<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.583918437" name="Debug">
+	<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.845088936" name="Debug">
 		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
 			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
 			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
 			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
 			<provider copy-of="extension" id="org.eclipse.cdt.managedbuilder.core.GCCBuildCommandParser"/>
-			<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="-654350483362607198" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
+			<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="241190362556324314" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
 				<language-scope id="org.eclipse.cdt.core.gcc"/>
 				<language-scope id="org.eclipse.cdt.core.g++"/>
 			</provider>
 		</extension>
 	</configuration>
-	<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1388812221" name="Release">
+	<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1567871435" name="Release">
 		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
 			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
 			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
 			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
 			<provider copy-of="extension" id="org.eclipse.cdt.managedbuilder.core.GCCBuildCommandParser"/>
-			<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="-654350483362607198" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
+			<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="241190362556324314" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
 				<language-scope id="org.eclipse.cdt.core.gcc"/>
 				<language-scope id="org.eclipse.cdt.core.g++"/>
 			</provider>

Soft/STM32/Controle/Controle Debug.launch

@@ -0,0 +1,80 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="com.st.stm32cube.ide.mcu.debug.launch.launchConfigurationType">
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.access_port_id" value="0"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.enable_live_expr" value="true"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.enable_swv" value="false"/>
+    <intAttribute key="com.st.stm32cube.ide.mcu.debug.launch.formatVersion" value="2"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.ip_address_local" value="localhost"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.limit_swo_clock.enabled" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.limit_swo_clock.value" value=""/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.loadList" value="{&quot;fItems&quot;:[{&quot;fIsFromMainTab&quot;:true,&quot;fPath&quot;:&quot;Debug/Controle.elf&quot;,&quot;fProjectName&quot;:&quot;Controle&quot;,&quot;fPerformBuild&quot;:true,&quot;fDownload&quot;:true,&quot;fLoadSymbols&quot;:true}]}"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.override_start_address_mode" value="default"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.remoteCommand" value="target remote"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startServer" value="true"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startuptab.exception.divby0" value="true"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startuptab.exception.unaligned" value="false"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startuptab.haltonexception" value="true"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swd_mode" value="true"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_port" value="61235"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_trace_hclk" value="16000000"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.useRemoteTarget" value="true"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.vector_table" value=""/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.verify_flash_download" value="true"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.cti_allow_halt" value="false"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.cti_signal_halt" value="false"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_external_loader" value="false"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_logging" value="false"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_max_halt_delay" value="false"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_shared_stlink" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.external_loader" value=""/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.external_loader_init" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.frequency" value="0"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.halt_all_on_reset" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.log_file" value="/home/remy/Projet/rampesLeds/Soft/STM32/Controle/Debug/st-link_gdbserver_log.txt"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.low_power_debug" value="disable"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.max_halt_delay" value="2"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.reset_strategy" value="no_reset"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_check_serial_number" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_txt_serial_number" value=""/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.watchdog_config" value="none"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlinkenable_rtos" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlinkrestart_configurations" value="{&quot;fVersion&quot;:1,&quot;fItems&quot;:[{&quot;fDisplayName&quot;:&quot;Reset&quot;,&quot;fIsSuppressible&quot;:false,&quot;fResetAttribute&quot;:&quot;Software system reset&quot;,&quot;fResetStrategies&quot;:[{&quot;fDisplayName&quot;:&quot;Software system reset&quot;,&quot;fLaunchAttribute&quot;:&quot;system_reset&quot;,&quot;fGdbCommands&quot;:[&quot;monitor reset\n&quot;],&quot;fCmdOptions&quot;:[&quot;-g&quot;]},{&quot;fDisplayName&quot;:&quot;Hardware reset&quot;,&quot;fLaunchAttribute&quot;:&quot;hardware_reset&quot;,&quot;fGdbCommands&quot;:[&quot;monitor reset hardware\n&quot;],&quot;fCmdOptions&quot;:[&quot;-g&quot;]},{&quot;fDisplayName&quot;:&quot;Core reset&quot;,&quot;fLaunchAttribute&quot;:&quot;core_reset&quot;,&quot;fGdbCommands&quot;:[&quot;monitor reset core\n&quot;],&quot;fCmdOptions&quot;:[&quot;-g&quot;]},{&quot;fDisplayName&quot;:&quot;None&quot;,&quot;fLaunchAttribute&quot;:&quot;no_reset&quot;,&quot;fGdbCommands&quot;:[],&quot;fCmdOptions&quot;:[&quot;-g&quot;]}],&quot;fGdbCommandGroup&quot;:{&quot;name&quot;:&quot;Additional commands&quot;,&quot;commands&quot;:[]},&quot;fStartApplication&quot;:true}]}"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.enableRtosProxy" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyCustomProperties" value=""/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyDriver" value="threadx"/>
+    <booleanAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyDriverAuto" value="false"/>
+    <stringAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyDriverPort" value="cortex_m0"/>
+    <intAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyPort" value="60000"/>
+    <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="false"/>
+    <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="false"/>
+    <stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value=""/>
+    <stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+    <stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDeviceId" value="com.st.stm32cube.ide.mcu.debug.stlink"/>
+    <stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+    <intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="61234"/>
+    <stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+    <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+    <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+    <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+    <stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+    <stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+    <booleanAttribute key="org.eclipse.cdt.dsf.gdb.NON_STOP" value="false"/>
+    <booleanAttribute key="org.eclipse.cdt.dsf.gdb.UPDATE_THREADLIST_ON_SUSPEND" value="false"/>
+    <intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+    <stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+    <stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="remote"/>
+    <booleanAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN" value="true"/>
+    <stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN_SYMBOL" value="main"/>
+    <stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug/Controle.elf"/>
+    <stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="Controle"/>
+    <booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+    <stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.845088936"/>
+    <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+        <listEntry value="/Controle"/>
+    </listAttribute>
+    <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+        <listEntry value="4"/>
+    </listAttribute>
+    <stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;memoryBlockExpressionList context=&quot;reserved-for-future-use&quot;/&gt;"/>
+    <stringAttribute key="process_factory_id" value="com.st.stm32cube.ide.mcu.debug.launch.HardwareDebugProcessFactory"/>
+</launchConfiguration>

Soft/STM32/Controle/Controle.ioc

@@ -7,6 +7,10 @@ ADC1.SamplingTime-70\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES
 ADC1.master=1
 File.Version=6
 GPIO.groupedBy=Group By Peripherals
+I2C3.ClockSpeed=10000
+I2C3.DualAddressMode=I2C_DUALADDRESS_ENABLE
+I2C3.IPParameters=ClockSpeed,DualAddressMode,NoStretchMode
+I2C3.NoStretchMode=I2C_NOSTRETCH_ENABLE
 KeepUserPlacement=false
 Mcu.CPN=STM32F401RCT6
 Mcu.Family=STM32F4
@@ -14,7 +18,8 @@ Mcu.IP0=ADC1
 Mcu.IP1=I2C2
 Mcu.IP10=TIM4
 Mcu.IP11=TIM9
-Mcu.IP12=USART6
+Mcu.IP12=TIM10
+Mcu.IP13=USART6
 Mcu.IP2=I2C3
 Mcu.IP3=NVIC
 Mcu.IP4=RCC
@@ -23,7 +28,7 @@ Mcu.IP6=SYS
 Mcu.IP7=TIM1
 Mcu.IP8=TIM2
 Mcu.IP9=TIM3
-Mcu.IPNb=13
+Mcu.IPNb=14
 Mcu.Name=STM32F401R(B-C)Tx
 Mcu.Package=LQFP64
 Mcu.Pin0=PC14-OSC32_IN
@@ -54,18 +59,19 @@ Mcu.Pin30=VP_TIM1_VS_ControllerModeClock
 Mcu.Pin31=VP_TIM1_VS_ClockSourceITR
 Mcu.Pin32=VP_TIM9_VS_ClockSourceITR
 Mcu.Pin33=VP_TIM9_VS_no_output1
+Mcu.Pin34=VP_TIM10_VS_ClockSourceINT
 Mcu.Pin4=PA1
 Mcu.Pin5=PA2
 Mcu.Pin6=PA3
 Mcu.Pin7=PA4
 Mcu.Pin8=PA6
 Mcu.Pin9=PA7
-Mcu.PinsNb=34
+Mcu.PinsNb=35
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F401RCTx
-MxCube.Version=6.1.1
-MxDb.Version=DB.6.0.10
+MxCube.Version=6.5.0
+MxDb.Version=DB.6.0.50
 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:true
 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:true
 NVIC.ForceEnableDMAVector=true
@@ -76,7 +82,8 @@ NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:true
 NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:true
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
-NVIC.TIM5_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
+NVIC.TIM1_UP_TIM10_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
+NVIC.TIM5_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:true
 NVIC.TimeBase=TIM5_IRQn
 NVIC.TimeBaseIP=TIM5
 NVIC.USART6_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
@@ -110,6 +117,8 @@ PA7.GPIOParameters=GPIO_Label
 PA7.GPIO_Label=S4
 PA7.Locked=true
 PA7.Signal=S_TIM3_CH2
+PA8.GPIOParameters=GPIO_Pu
+PA8.GPIO_Pu=GPIO_PULLUP
 PA8.Mode=I2C
 PA8.Signal=I2C3_SCL
 PB0.GPIOParameters=GPIO_Label
@@ -120,6 +129,8 @@ PB1.GPIOParameters=GPIO_Label
 PB1.GPIO_Label=S6
 PB1.Locked=true
 PB1.Signal=S_TIM3_CH4
+PB10.GPIOParameters=GPIO_Pu
+PB10.GPIO_Pu=GPIO_PULLUP
 PB10.Mode=I2C
 PB10.Signal=I2C2_SCL
 PB12.GPIOParameters=GPIO_Label
@@ -138,6 +149,8 @@ PB2.GPIOParameters=GPIO_Label
 PB2.GPIO_Label=MFP
 PB2.Locked=true
 PB2.Signal=GPIO_Output
+PB3.GPIOParameters=GPIO_Pu
+PB3.GPIO_Pu=GPIO_PULLUP
 PB3.Mode=I2C
 PB3.Signal=I2C2_SDA
 PB6.GPIOParameters=GPIO_Label
@@ -163,6 +176,8 @@ PC6.Signal=USART6_TX
 PC7.Locked=true
 PC7.Mode=Asynchronous
 PC7.Signal=USART6_RX
+PC9.GPIOParameters=GPIO_Pu
+PC9.GPIO_Pu=GPIO_PULLUP
 PC9.Mode=I2C
 PC9.Signal=I2C3_SDA
 PH0\ -\ OSC_IN.Locked=true
@@ -181,7 +196,7 @@ ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32F401RCTx
-ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.25.2
+ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.27.1
 ProjectManager.FreePins=true
 ProjectManager.HalAssertFull=false
 ProjectManager.HeapSize=0x200
@@ -199,7 +214,7 @@ ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=STM32CubeIDE
 ProjectManager.ToolChainLocation=
 ProjectManager.UnderRoot=true
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-true,3-MX_TIM4_Init-TIM4-false-HAL-true,4-MX_TIM3_Init-TIM3-false-HAL-true,5-MX_I2C3_Init-I2C3-false-HAL-true,6-MX_I2C2_Init-I2C2-false-HAL-true,7-MX_TIM9_Init-TIM9-false-HAL-true,8-MX_TIM1_Init-TIM1-false-HAL-true,9-MX_ADC1_Init-ADC1-false-HAL-true,10-MX_TIM2_Init-TIM2-false-HAL-true,11-MX_USART6_UART_Init-USART6-false-HAL-true,12-MX_RTC_Init-RTC-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-true,3-MX_TIM1_Init-TIM1-true-HAL-true,4-MX_TIM2_Init-TIM2-false-HAL-true,5-MX_TIM3_Init-TIM3-false-HAL-true,6-MX_TIM4_Init-TIM4-false-HAL-true,7-MX_TIM9_Init-TIM9-false-HAL-true,8-MX_I2C3_Init-I2C3-false-HAL-true,9-MX_I2C2_Init-I2C2-false-HAL-true,10-MX_ADC1_Init-ADC1-false-HAL-true,11-MX_USART6_UART_Init-USART6-false-HAL-true,12-MX_RTC_Init-RTC-false-HAL-true,13-MX_TIM10_Init-TIM10-false-HAL-true
 RCC.48MHZClocksFreq_Value=48000000
 RCC.AHBFreq_Value=84000000
 RCC.APB1CLKDivider=RCC_HCLK_DIV2
@@ -258,6 +273,10 @@ SH.S_TIM4_CH4.0=TIM4_CH4,PWM Generation4 CH4
 SH.S_TIM4_CH4.ConfNb=1
 TIM1.Channel-Output\ Compare1\ CH1N=TIM_CHANNEL_1
 TIM1.IPParameters=Channel-Output Compare1 CH1N
+TIM10.AutoReloadPreload=TIM_AUTORELOAD_PRELOAD_ENABLE
+TIM10.IPParameters=Prescaler,Period,AutoReloadPreload
+TIM10.Period=63000
+TIM10.Prescaler=20000
 TIM2.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
 TIM2.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
 TIM2.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
@@ -286,6 +305,8 @@ VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
 VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
 VP_SYS_VS_tim5.Mode=TIM5
 VP_SYS_VS_tim5.Signal=SYS_VS_tim5
+VP_TIM10_VS_ClockSourceINT.Mode=Enable_Timer
+VP_TIM10_VS_ClockSourceINT.Signal=TIM10_VS_ClockSourceINT
 VP_TIM1_VS_ClockSourceITR.Mode=TriggerSource_ITR0
 VP_TIM1_VS_ClockSourceITR.Signal=TIM1_VS_ClockSourceITR
 VP_TIM1_VS_ControllerModeClock.Mode=Clock Mode

Soft/STM32/Controle/Core/Inc/Comunication.h

@@ -2,7 +2,6 @@
 #define __COMUNICATION_H
 
 #include "stdint.h"
-#include <FIFO_COM.h>
 
 
 #define WRITETABHEU	0x00
@@ -15,6 +14,7 @@
 #define STOP		0x70
 #define ESSAI		0x80
 #define SYNCRTC		0x90
+#define STATUS		0xA0
 
 #define MASKMES 0XF0
 #define MASKID 0x07
@@ -40,5 +40,7 @@ void Com_ESSAI(uint8_t* mes);
 
 void Com_SyncRTC(uint8_t* mes);
 
+void Com_Status();
+
 #endif
 

Soft/STM32/Controle/Core/Inc/Eeprom.h

@@ -0,0 +1,37 @@
+/*
+ * Eeprom.h V2.0
+ *
+ *  Created on: 14 janv. 2019
+ *      Author: e_rcluze
+ *
+ *Le fonctionement de l'Eeprom est en Fifo.
+ *L'adrresse du pointeur de lecture est stocker dans les 16 premier byte de l'eeprom
+ *L'adrresse du pointeur d'ecriture est stocker dans les 16 bit suivant
+ *
+ */
+
+#ifndef EEPROM_H_
+#define EEPROM_H_
+
+#include <stdint.h>
+#include "i2c.h"
+
+#define EepromADD 0XA0
+
+typedef struct {
+	I2C_HandleTypeDef *I2C;
+	GPIO_TypeDef *WC_PORT;
+	uint16_t WC_PIN;
+} EEprom_HandleTypeDef;
+
+EEprom_HandleTypeDef EEprom;
+
+
+HAL_StatusTypeDef readEeprom(uint16_t Add, uint8_t *tab, int len);
+HAL_StatusTypeDef writeEeprom(uint16_t Add, uint8_t *tab, int len);
+
+void initEprom(I2C_HandleTypeDef *typ, GPIO_TypeDef *port, uint16_t pin);
+
+void testEeprom(); //fonction pour tester le hard de l'Eeprom
+
+#endif /* EEPROM_H_ */

Soft/STM32/Controle/Core/Inc/Heure.h

@@ -0,0 +1,42 @@
+/*
+ * Heure.h
+ *
+ *  Created on: 14 mai 2019
+ *      Author: e_rcluze
+ */
+
+#ifndef HEURE_H_
+#define HEURE_H_
+
+#include <stdint.h>
+
+typedef struct {
+
+	uint8_t second;
+	uint8_t minute;
+	uint8_t heure;
+	uint8_t jour;
+	uint8_t joursemaine;
+	uint8_t mois;
+	uint16_t annee;
+
+} Date;
+
+typedef struct {
+	uint8_t minute;
+	uint8_t heure;
+} Heure;
+
+/**
+ * fonction qui renvoie
+ * 	-1 si h1 est inf�rieur que H2
+ * 	0 si h1 et h2 egale
+ * 	1 si h1 est sup�rieur a h2
+ */
+int8_t CompareHeure(Heure h1, Heure h2);
+
+int16_t DiffHeure(Heure h1, Heure h2);
+
+int32_t DiffDate(Date h1, Date h2);
+
+#endif /* HEURE_H_ */

Soft/STM32/Controle/Core/Inc/PWM.h

@@ -8,7 +8,6 @@
 #ifndef PWM_H_
 #define PWM_H_
 
-#include <RTC.h>
 #include "tim.h"
 #include "Tab.h"
 

Soft/STM32/Controle/Core/Inc/adc.h

@@ -1,52 +1,52 @@
-/**
-  ******************************************************************************
-  * @file    adc.h
-  * @brief   This file contains all the function prototypes for
-  *          the adc.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __ADC_H__
-#define __ADC_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern ADC_HandleTypeDef hadc1;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_ADC1_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __ADC_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    adc.h
+  * @brief   This file contains all the function prototypes for
+  *          the adc.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __ADC_H__
+#define __ADC_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern ADC_HandleTypeDef hadc1;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_ADC1_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_H__ */
+

Soft/STM32/Controle/Core/Inc/gpio.h

@@ -1,49 +1,49 @@
-/**
-  ******************************************************************************
-  * @file    gpio.h
-  * @brief   This file contains all the function prototypes for
-  *          the gpio.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __GPIO_H__
-#define __GPIO_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_GPIO_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-#endif /*__ GPIO_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    gpio.h
+  * @brief   This file contains all the function prototypes for
+  *          the gpio.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __GPIO_H__
+#define __GPIO_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_GPIO_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__ GPIO_H__ */
+

Soft/STM32/Controle/Core/Inc/i2c.h

@@ -1,54 +1,55 @@
-/**
-  ******************************************************************************
-  * @file    i2c.h
-  * @brief   This file contains all the function prototypes for
-  *          the i2c.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __I2C_H__
-#define __I2C_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern I2C_HandleTypeDef hi2c2;
-extern I2C_HandleTypeDef hi2c3;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_I2C2_Init(void);
-void MX_I2C3_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __I2C_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    i2c.h
+  * @brief   This file contains all the function prototypes for
+  *          the i2c.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __I2C_H__
+#define __I2C_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern I2C_HandleTypeDef hi2c2;
+
+extern I2C_HandleTypeDef hi2c3;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_I2C2_Init(void);
+void MX_I2C3_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __I2C_H__ */
+

Soft/STM32/Controle/Core/Inc/main.h

@@ -1,109 +1,105 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : main.h
-  * @brief          : Header for main.c file.
-  *                   This file contains the common defines of the application.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __MAIN_H
-#define __MAIN_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-#include "stm32f4xx_hal.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-
-/* USER CODE END Includes */
-
-/* Exported types ------------------------------------------------------------*/
-/* USER CODE BEGIN ET */
-
-/* USER CODE END ET */
-
-/* Exported constants --------------------------------------------------------*/
-/* USER CODE BEGIN EC */
-
-/* USER CODE END EC */
-
-/* Exported macro ------------------------------------------------------------*/
-/* USER CODE BEGIN EM */
-
-/* USER CODE END EM */
-
-/* Exported functions prototypes ---------------------------------------------*/
-void Error_Handler(void);
-
-/* USER CODE BEGIN EFP */
-
-/* USER CODE END EFP */
-
-/* Private defines -----------------------------------------------------------*/
-#define WC_Pin GPIO_PIN_14
-#define WC_GPIO_Port GPIOC
-#define aquit_Pin GPIO_PIN_0
-#define aquit_GPIO_Port GPIOA
-#define CMD_Pin GPIO_PIN_1
-#define CMD_GPIO_Port GPIOA
-#define S1_Pin GPIO_PIN_2
-#define S1_GPIO_Port GPIOA
-#define S2_Pin GPIO_PIN_3
-#define S2_GPIO_Port GPIOA
-#define Themp_Pin GPIO_PIN_4
-#define Themp_GPIO_Port GPIOA
-#define S3_Pin GPIO_PIN_6
-#define S3_GPIO_Port GPIOA
-#define S4_Pin GPIO_PIN_7
-#define S4_GPIO_Port GPIOA
-#define S5_Pin GPIO_PIN_0
-#define S5_GPIO_Port GPIOB
-#define S6_Pin GPIO_PIN_1
-#define S6_GPIO_Port GPIOB
-#define MFP_Pin GPIO_PIN_2
-#define MFP_GPIO_Port GPIOB
-#define LED_rouge_Pin GPIO_PIN_12
-#define LED_rouge_GPIO_Port GPIOB
-#define LED_vert_Pin GPIO_PIN_13
-#define LED_vert_GPIO_Port GPIOB
-#define LED_Orange_Pin GPIO_PIN_14
-#define LED_Orange_GPIO_Port GPIOB
-#define S7_Pin GPIO_PIN_6
-#define S7_GPIO_Port GPIOB
-#define S8_Pin GPIO_PIN_7
-#define S8_GPIO_Port GPIOB
-#define S9_Pin GPIO_PIN_8
-#define S9_GPIO_Port GPIOB
-#define S10_Pin GPIO_PIN_9
-#define S10_GPIO_Port GPIOB
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __MAIN_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+#define WC_Pin GPIO_PIN_14
+#define WC_GPIO_Port GPIOC
+#define aquit_Pin GPIO_PIN_0
+#define aquit_GPIO_Port GPIOA
+#define CMD_Pin GPIO_PIN_1
+#define CMD_GPIO_Port GPIOA
+#define S1_Pin GPIO_PIN_2
+#define S1_GPIO_Port GPIOA
+#define S2_Pin GPIO_PIN_3
+#define S2_GPIO_Port GPIOA
+#define Themp_Pin GPIO_PIN_4
+#define Themp_GPIO_Port GPIOA
+#define S3_Pin GPIO_PIN_6
+#define S3_GPIO_Port GPIOA
+#define S4_Pin GPIO_PIN_7
+#define S4_GPIO_Port GPIOA
+#define S5_Pin GPIO_PIN_0
+#define S5_GPIO_Port GPIOB
+#define S6_Pin GPIO_PIN_1
+#define S6_GPIO_Port GPIOB
+#define MFP_Pin GPIO_PIN_2
+#define MFP_GPIO_Port GPIOB
+#define LED_rouge_Pin GPIO_PIN_12
+#define LED_rouge_GPIO_Port GPIOB
+#define LED_vert_Pin GPIO_PIN_13
+#define LED_vert_GPIO_Port GPIOB
+#define LED_Orange_Pin GPIO_PIN_14
+#define LED_Orange_GPIO_Port GPIOB
+#define S7_Pin GPIO_PIN_6
+#define S7_GPIO_Port GPIOB
+#define S8_Pin GPIO_PIN_7
+#define S8_GPIO_Port GPIOB
+#define S9_Pin GPIO_PIN_8
+#define S9_GPIO_Port GPIOB
+#define S10_Pin GPIO_PIN_9
+#define S10_GPIO_Port GPIOB
+/* USER CODE BEGIN Private defines */
+#define SizeMes 8
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */

Soft/STM32/Controle/Core/Inc/rtc.h

@@ -1,53 +1,53 @@
-/**
-  ******************************************************************************
-  * @file    rtc.h
-  * @brief   This file contains all the function prototypes for
-  *          the rtc.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __RTC_H__
-#define __RTC_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern RTC_HandleTypeDef hrtc;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_RTC_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-uint16_t ReadHeureMin(void);
-HAL_StatusTypeDef WriteTime(RTC_TimeTypeDef *sTime,RTC_DateTypeDef *sDate);
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __RTC_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    rtc.h
+  * @brief   This file contains all the function prototypes for
+  *          the rtc.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __RTC_H__
+#define __RTC_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern RTC_HandleTypeDef hrtc;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_RTC_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+uint16_t ReadHeureMin();
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __RTC_H__ */
+

Soft/STM32/Controle/Core/Inc/stm32f4xx_hal_conf.h

@@ -1,486 +1,491 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_conf_template.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration template file.
-  *          This file should be copied to the application folder and renamed
-  *          to stm32f4xx_hal_conf.h.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_CONF_H
-#define __STM32F4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-
-  #define HAL_ADC_MODULE_ENABLED
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED   */
-/* #define HAL_DMA2D_MODULE_ENABLED   */
-/* #define HAL_ETH_MODULE_ENABLED   */
-/* #define HAL_NAND_MODULE_ENABLED   */
-/* #define HAL_NOR_MODULE_ENABLED   */
-/* #define HAL_PCCARD_MODULE_ENABLED   */
-/* #define HAL_SRAM_MODULE_ENABLED   */
-/* #define HAL_SDRAM_MODULE_ENABLED   */
-/* #define HAL_HASH_MODULE_ENABLED   */
-#define HAL_I2C_MODULE_ENABLED
-/* #define HAL_I2S_MODULE_ENABLED   */
-/* #define HAL_IWDG_MODULE_ENABLED   */
-/* #define HAL_LTDC_MODULE_ENABLED   */
-/* #define HAL_RNG_MODULE_ENABLED   */
-#define HAL_RTC_MODULE_ENABLED
-/* #define HAL_SAI_MODULE_ENABLED   */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_MMC_MODULE_ENABLED   */
-/* #define HAL_SPI_MODULE_ENABLED   */
-#define HAL_TIM_MODULE_ENABLED
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED   */
-/* #define HAL_IRDA_MODULE_ENABLED   */
-/* #define HAL_SMARTCARD_MODULE_ENABLED   */
-/* #define HAL_SMBUS_MODULE_ENABLED   */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-/* #define HAL_PCD_MODULE_ENABLED   */
-/* #define HAL_HCD_MODULE_ENABLED   */
-/* #define HAL_DSI_MODULE_ENABLED   */
-/* #define HAL_QSPI_MODULE_ENABLED   */
-/* #define HAL_QSPI_MODULE_ENABLED   */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_FMPI2C_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED   */
-/* #define HAL_DFSDM_MODULE_ENABLED   */
-/* #define HAL_LPTIM_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_EXTI_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.*/
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE		      ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0U)   /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## Ethernet peripheral configuration ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)4U)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)4U)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-
-/* DP83848_PHY_ADDRESS Address*/
-#define DP83848_PHY_ADDRESS           0x01U
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x000000FFU)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFFU)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFFU)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFFU)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x0000U)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x0001U)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000U)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000U)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100U)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000U)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100U)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000U)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000U)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200U)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800U)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400U)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020U)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004U)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002U)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-#define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     0U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32f4xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f4xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f4xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f4xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f4xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_PCCARD_MODULE_ENABLED
-  #include "stm32f4xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f4xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32f4xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f4xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f4xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f4xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f4xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f4xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f4xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f4xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_FMPI2C_MODULE_ENABLED
- #include "stm32f4xx_hal_fmpi2c.h"
-#endif /* HAL_FMPI2C_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f4xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f4xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f4xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32f4xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_CONF_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_conf_template.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f4xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+
+  #define HAL_ADC_MODULE_ENABLED
+/* #define HAL_CRYP_MODULE_ENABLED   */
+/* #define HAL_CAN_MODULE_ENABLED   */
+/* #define HAL_CRC_MODULE_ENABLED   */
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED   */
+/* #define HAL_CRYP_MODULE_ENABLED   */
+/* #define HAL_DAC_MODULE_ENABLED   */
+/* #define HAL_DCMI_MODULE_ENABLED   */
+/* #define HAL_DMA2D_MODULE_ENABLED   */
+/* #define HAL_ETH_MODULE_ENABLED   */
+/* #define HAL_NAND_MODULE_ENABLED   */
+/* #define HAL_NOR_MODULE_ENABLED   */
+/* #define HAL_PCCARD_MODULE_ENABLED   */
+/* #define HAL_SRAM_MODULE_ENABLED   */
+/* #define HAL_SDRAM_MODULE_ENABLED   */
+/* #define HAL_HASH_MODULE_ENABLED   */
+#define HAL_I2C_MODULE_ENABLED
+/* #define HAL_I2S_MODULE_ENABLED   */
+/* #define HAL_IWDG_MODULE_ENABLED   */
+/* #define HAL_LTDC_MODULE_ENABLED   */
+/* #define HAL_RNG_MODULE_ENABLED   */
+#define HAL_RTC_MODULE_ENABLED
+/* #define HAL_SAI_MODULE_ENABLED   */
+/* #define HAL_SD_MODULE_ENABLED   */
+/* #define HAL_MMC_MODULE_ENABLED   */
+/* #define HAL_SPI_MODULE_ENABLED   */
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+/* #define HAL_USART_MODULE_ENABLED   */
+/* #define HAL_IRDA_MODULE_ENABLED   */
+/* #define HAL_SMARTCARD_MODULE_ENABLED   */
+/* #define HAL_SMBUS_MODULE_ENABLED   */
+/* #define HAL_WWDG_MODULE_ENABLED   */
+/* #define HAL_PCD_MODULE_ENABLED   */
+/* #define HAL_HCD_MODULE_ENABLED   */
+/* #define HAL_DSI_MODULE_ENABLED   */
+/* #define HAL_QSPI_MODULE_ENABLED   */
+/* #define HAL_QSPI_MODULE_ENABLED   */
+/* #define HAL_CEC_MODULE_ENABLED   */
+/* #define HAL_FMPI2C_MODULE_ENABLED   */
+/* #define HAL_FMPSMBUS_MODULE_ENABLED   */
+/* #define HAL_SPDIFRX_MODULE_ENABLED   */
+/* #define HAL_DFSDM_MODULE_ENABLED   */
+/* #define HAL_LPTIM_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    25000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+ #define LSI_VALUE  32000U       /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  32768U    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    5000U   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    12288000U /*!< Value of the External audio frequency in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE		      3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            15U   /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+#define  DATA_CACHE_ENABLE            1U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
+#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
+#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
+#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
+#define  USE_HAL_FMPSMBUS_REGISTER_CALLBACKS    0U /* FMPSMBUS register callback disabled  */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
+#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    4U       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848_PHY_ADDRESS Address*/
+#define DP83848_PHY_ADDRESS           0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000U)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001U)    /*!< Transceiver Basic Status Register    */
+
+#define PHY_RESET                       ((uint16_t)0x8000U)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000U)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100U)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000U)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100U)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000U)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000U)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200U)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800U)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400U)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020U)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004U)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002U)  /*!< Jabber condition detected            */
+
+/* Section 4: Extended PHY Registers */
+#define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
+
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+  #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "stm32f4xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+  #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_FMPSMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpsmbus.h"
+#endif /* HAL_FMPSMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */

Soft/STM32/Controle/Core/Inc/stm32f4xx_it.h

@@ -1,71 +1,69 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_it.h
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
- ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_IT_H
-#define __STM32F4xx_IT_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Exported types ------------------------------------------------------------*/
-/* USER CODE BEGIN ET */
-
-/* USER CODE END ET */
-
-/* Exported constants --------------------------------------------------------*/
-/* USER CODE BEGIN EC */
-
-/* USER CODE END EC */
-
-/* Exported macro ------------------------------------------------------------*/
-/* USER CODE BEGIN EM */
-
-/* USER CODE END EM */
-
-/* Exported functions prototypes ---------------------------------------------*/
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-void TIM5_IRQHandler(void);
-void USART6_IRQHandler(void);
-/* USER CODE BEGIN EFP */
-
-/* USER CODE END EFP */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_IT_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_IT_H
+#define __STM32F4xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+void TIM1_UP_TIM10_IRQHandler(void);
+void TIM5_IRQHandler(void);
+void USART6_IRQHandler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_IT_H */

Soft/STM32/Controle/Core/Inc/tim.h

@@ -1,62 +1,69 @@
-/**
-  ******************************************************************************
-  * @file    tim.h
-  * @brief   This file contains all the function prototypes for
-  *          the tim.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __TIM_H__
-#define __TIM_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern TIM_HandleTypeDef htim1;
-extern TIM_HandleTypeDef htim2;
-extern TIM_HandleTypeDef htim3;
-extern TIM_HandleTypeDef htim4;
-extern TIM_HandleTypeDef htim9;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_TIM1_Init(void);
-void MX_TIM2_Init(void);
-void MX_TIM3_Init(void);
-void MX_TIM4_Init(void);
-void MX_TIM9_Init(void);
-
-void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __TIM_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    tim.h
+  * @brief   This file contains all the function prototypes for
+  *          the tim.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __TIM_H__
+#define __TIM_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern TIM_HandleTypeDef htim1;
+
+extern TIM_HandleTypeDef htim2;
+
+extern TIM_HandleTypeDef htim3;
+
+extern TIM_HandleTypeDef htim4;
+
+extern TIM_HandleTypeDef htim9;
+
+extern TIM_HandleTypeDef htim10;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_TIM1_Init(void);
+void MX_TIM2_Init(void);
+void MX_TIM3_Init(void);
+void MX_TIM4_Init(void);
+void MX_TIM9_Init(void);
+void MX_TIM10_Init(void);
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_H__ */
+

Soft/STM32/Controle/Core/Inc/usart.h

@@ -1,52 +1,52 @@
-/**
-  ******************************************************************************
-  * @file    usart.h
-  * @brief   This file contains all the function prototypes for
-  *          the usart.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USART_H__
-#define __USART_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern UART_HandleTypeDef huart6;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_USART6_UART_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USART_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    usart.h
+  * @brief   This file contains all the function prototypes for
+  *          the usart.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USART_H__
+#define __USART_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern UART_HandleTypeDef huart6;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_USART6_UART_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USART_H__ */
+

Soft/STM32/Controle/Core/Src/Comunication.c

@@ -3,10 +3,12 @@
 #include "PWM.h"
 #include "usart.h"
 #include <Heure.h>
+#include "rtc.h"
 
 extern Sortie tabSortie[10];
 extern uint8_t gl_Stop;
 extern uint8_t gl_Essai;
+extern uint8_t erreur;
 
 void parse(uint8_t* mes){
 	switch(mes[0] & MASKMES){
@@ -40,51 +42,71 @@ void parse(uint8_t* mes){
 	case SYNCRTC:
 		Com_SyncRTC(mes);
 		break;
+	case STATUS:
+		Com_Status();
+		break;
+	default:
+		HAL_NVIC_SystemReset();
+		break;
 	}
 }
 
 void Com_WriteTabHeure(uint8_t* mes){
-	if(mes[1]>>7)
+
+	if(mes[1]>>7){
 		tabSortie[mes[1]&0x0F].Extinxtion=mes[2]*60+mes[3];
-	else
+		writeEeprom((mes[1]&0x0F)*5, &mes[2], 2);
+	}
+	else{
 		tabSortie[mes[1]&0x0F].Demmarage=mes[2]*60+mes[3];
+		writeEeprom((mes[1]&0x0F)*5+2, &mes[2], 2);
 
-	//TODO renvoie la valeur de retour;
+	}
+	uint8_t mesRet[8];
+	mesRet[0] =  WRITETABHEU;
+	mesRet[1]=55;
+	HAL_UART_Transmit(&huart6, mesRet, 8, 500);
 }
 
 void Com_ReadTabVal(uint8_t* mes){
-
-	//TODO renvoie la valeur de retour;
+//TODO a faire
 }
 
 void Com_WriteTabVal(uint8_t* mes){
-	if(mes[1]>>7)
+	HAL_StatusTypeDef res;
+	if(mes[1]>>7){
 		tabSortie[mes[1]&0x0F].Pente=mes[2];
-	else
+		writeEeprom((mes[1]&0x0F)*5+4, &mes[2], 1);
+	}
+	else{
 		tabSortie[mes[1]&0x0F].PuissanceMax=mes[2];
+		writeEeprom((mes[1]&0x0F)*5+3, &mes[2], 1);
+	}
+	uint8_t mesRet[8];
+	mesRet[0] =  WRITETABVAL;
+	HAL_UART_Transmit(&huart6, mesRet, 8, 500);
 
-	//TODO renvoie la valeur de retour;
 }
 
 void Com_ReadTabHeure(uint8_t* mes){
-
-	//TODO renvoie la valeur de retour;
+//TODO a faire
 }
 
 void Com_ReadVent(uint8_t* mes){
-
-	//TODO renvoie la valeur de retour;
+//TODO a faire
 }
 
 void Com_WriteVent(uint8_t* mes){
-
-	//TODO renvoie la valeur de retour;
+	//TODO a faire
 }
 
 void Com_WriteValEsai(uint8_t* mes){
 	tabSortie[mes[1]&0x0F].PuissanceEssai=mes[2];
-	Essai();
-	//TODO renvoie la valeur de retour;
+	uint8_t mesRet[8];
+	mesRet[0] =  WRITEVALESS;
+	HAL_UART_Transmit(&huart6, mesRet, 8, 500);
+	if (gl_Essai)
+		Essai();
 }
 
 void Com_STOP(uint8_t* mes){
@@ -97,7 +119,9 @@ void Com_STOP(uint8_t* mes){
 		uint16_t Hmin = ReadHeureMin();
 		GerePWM(Hmin);
 	}
-	//TODO renvoie la valeur de retour;
+	uint8_t mesRet[8];
+	mesRet[0] = STOP ;
+	HAL_UART_Transmit(&huart6, mesRet, 8, 500);
 }
 
 void Com_ESSAI(uint8_t* mes){
@@ -110,7 +134,9 @@ void Com_ESSAI(uint8_t* mes){
 		uint16_t Hmin = ReadHeureMin();
 		GerePWM(Hmin);
 	}
-	//TODO renvoie la valeur de retour;
+	uint8_t mesRet[8];
+	mesRet[0] =  ESSAI;
+	HAL_UART_Transmit(&huart6, mesRet, 8, 500);
 }
 
 void Com_SyncRTC(uint8_t* mes){
@@ -123,7 +149,20 @@ void Com_SyncRTC(uint8_t* mes){
 	sTime.Hours=mes[5];
 	sTime.Minutes=mes[6];
 	sTime.Seconds=mes[7];
-	HAL_StatusTypeDef res = WriteTime(&sTime, &sDate);
-	//TODO renvoie la valeur de retour;
+	if (HAL_RTC_SetTime(&hrtc, &sTime, RTC_FORMAT_BIN) != HAL_OK)
+		Error_Handler; //TODO
+	if (HAL_RTC_SetDate(&hrtc, &sDate, RTC_FORMAT_BIN) != HAL_OK)
+		Error_Handler;//TODO
+	uint8_t mesRet[8];
+ 	mesRet[0] =  SYNCRTC;
+	HAL_UART_Transmit(&huart6, mesRet, 8, 500);
+}
+
+void Com_Status(){
+	uint8_t mesRet[8];
+ 	mesRet[0] =  STATUS;
+ 	mesRet[1] = erreur;
+	HAL_UART_Transmit(&huart6, mesRet, 8, 500);
+	erreur = 0;
 }
 

Soft/STM32/Controle/Core/Src/Eeprom.c

@@ -0,0 +1,54 @@
+/*
+ * V1.0
+ */
+
+#include <Eeprom.h>
+
+/****Private fonction */
+
+HAL_StatusTypeDef readEeprom(uint16_t Add,uint8_t *tab, int len){
+	HAL_StatusTypeDef res;
+	uint8_t add[2];
+	add[0]=Add>>8;
+	add[1]=Add;
+
+	if ((res = HAL_I2C_Master_Transmit(EEprom.I2C,EepromADD,add,2,1000)) != HAL_OK){
+		return res;
+	}
+	res = HAL_I2C_Master_Receive(EEprom.I2C,EepromADD,tab,len,1000);
+	return res;
+
+}
+
+HAL_StatusTypeDef writeEeprom(uint16_t Add,uint8_t *tab, int len){
+	HAL_StatusTypeDef res;
+	uint8_t data[2+len];
+	data[0]=Add>>8;
+	data[1]=Add;
+
+	for(int i =0;i<len;i++)
+		data[i+2]=tab[i];
+
+	HAL_GPIO_WritePin(EEprom.WC_PORT,EEprom.WC_PIN,0);
+	if ((res = HAL_I2C_Master_Transmit(EEprom.I2C,EepromADD,data,2+len,1000)) != HAL_OK){
+		HAL_GPIO_WritePin(EEprom.WC_PORT,EEprom.WC_PIN,1);
+		return res;
+	}
+
+
+	//introduire un delay
+	for(int i =0;i<5000;i++)
+		data[2]=i;
+	HAL_GPIO_WritePin(EEprom.WC_PORT,EEprom.WC_PIN,1);
+	return res;
+}
+
+/** Public Fonction*/
+
+void initEprom(I2C_HandleTypeDef *typ,GPIO_TypeDef *port, uint16_t pin){
+	EEprom.I2C = typ;
+	EEprom.WC_PORT = port;
+	EEprom.WC_PIN = pin;
+	HAL_GPIO_WritePin(EEprom.WC_PORT,EEprom.WC_PIN,1);
+}
+

Soft/STM32/Controle/Core/Src/Heure.c

@@ -0,0 +1,52 @@
+/*
+ * Heure.c
+ *
+ *  Created on: 14 mai 2019
+ *      Author: e_rcluze
+ */
+
+#include "Heure.h"
+
+int8_t CompareHeure(Heure h1, Heure h2) {
+
+	if (h1.heure == h2.heure) {
+		if (h1.minute == h2.minute)
+			return 0;
+		else if (h1.minute < h2.minute)
+			return -1;
+		else
+			return 1;
+	} else if (h1.heure < h2.heure)
+		return -1;
+	else
+		return 1;
+}
+
+void HeureAjout(Heure res, Heure h1, uint8_t Pente) {
+	uint8_t minute = h1.minute + Pente;
+	res.heure = h1.heure + minute / 60;
+	res.minute = minute % 60;
+}
+
+void HeureSuppr(Heure res, Heure h1, uint8_t Pente) {
+	int8_t minute = h1.minute - Pente;
+	if (minute < 0) {
+		res.heure = h1.heure - 1;
+		res.minute = minute + 60;
+	} else {
+		res.heure = h1.heure;
+		res.minute = minute;
+	}
+}
+
+int16_t DiffHeure(Heure h1, Heure h2) {
+	return ((h1.heure - h2.heure) * 60) + (h1.minute - h2.minute);
+}
+
+int32_t DiffDate(Date h1, Date h2) {
+	int32_t min = h1.minute - h2.minute;
+	int32_t heure = (h1.heure - h2.heure) * 60;
+	int32_t jour = (h1.jour - h2.jour) * 24 * 60;
+	int32_t annee = (h1.annee - h2.annee) * 24 * 60 * 365;
+	return min + heure + jour + annee;
+}

Soft/STM32/Controle/Core/Src/PWM.c

@@ -21,45 +21,55 @@ void PWMSetDutyCycle(uint8_t sortie, uint8_t pourcentage) {
 	sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
 	sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
 	sConfigOC.Pulse = PourcentageToValue(pourcentage);
-	HAL_Delay(1);
+	//HAL_Delay(1);
 	switch (sortie) {
 	case 0:
+		HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
 		HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_3);
 		HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
 		break;
 	case 1:
+		HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_4);
 		HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4);
 		HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_4);
 		break;
 	case 2:
+		HAL_TIM_PWM_Stop(&htim3, TIM_CHANNEL_1);
 		HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1);
-		HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_3);
+		HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_1);
 		break;
 	case 3:
+		HAL_TIM_PWM_Stop(&htim3, TIM_CHANNEL_2);
 		HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_2);
 		HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_2);
 		break;
 	case 4:
+		HAL_TIM_PWM_Stop(&htim3, TIM_CHANNEL_3);
 		HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_3);
 		HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_3);
 		break;
 	case 5:
+		HAL_TIM_PWM_Stop(&htim3, TIM_CHANNEL_4);
 		HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_4);
 		HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_4);
 		break;
 	case 6:
+		HAL_TIM_PWM_Stop(&htim4, TIM_CHANNEL_1);
 		HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_1);
 		HAL_TIM_PWM_Start(&htim4, TIM_CHANNEL_1);
 		break;
 	case 7:
+		HAL_TIM_PWM_Stop(&htim4, TIM_CHANNEL_2);
 		HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_2);
 		HAL_TIM_PWM_Start(&htim4, TIM_CHANNEL_2);
 		break;
 	case 8:
+		HAL_TIM_PWM_Stop(&htim4, TIM_CHANNEL_3);
 		HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_3);
 		HAL_TIM_PWM_Start(&htim4, TIM_CHANNEL_3);
 		break;
 	case 9:
+		HAL_TIM_PWM_Stop(&htim4, TIM_CHANNEL_4);
 		HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_4);
 		HAL_TIM_PWM_Start(&htim4, TIM_CHANNEL_4);
 		break;
@@ -67,7 +77,7 @@ void PWMSetDutyCycle(uint8_t sortie, uint8_t pourcentage) {
 }
 
 uint16_t PourcentageToValue(uint8_t val) {
-	float t = (val * PWM_MAX) / 100;
+	float t = ((100-val) * PWM_MAX) / 100; //Logic inverse (si 0 alors allumé si 1 alors eteint)
 	return (uint16_t) t;
 }
 
@@ -75,7 +85,7 @@ void GerePWM(uint16_t heure) {
 	for(int i = 0; i<10;i++){
 		if ((heure >= tabSortie[i].Demmarage) & (heure < tabSortie[i].Extinxtion)) {
 			if (heure < tabSortie[i].Demmarage + tabSortie[i].Pente)
-					PWMSetDutyCycle(i,PWMPourcentageAll(i,heure));
+				PWMSetDutyCycle(i,PWMPourcentageAll(i,heure));
 			else if(heure > tabSortie[i].Extinxtion - tabSortie[i].Pente)
 				PWMSetDutyCycle(i,PWMPourcentageExt(i,heure));
 			else

Soft/STM32/Controle/Core/Src/adc.c

@@ -1,117 +1,128 @@
-/**
-  ******************************************************************************
-  * @file    adc.c
-  * @brief   This file provides code for the configuration
-  *          of the ADC instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "adc.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-ADC_HandleTypeDef hadc1;
-
-/* ADC1 init function */
-void MX_ADC1_Init(void)
-{
-  ADC_ChannelConfTypeDef sConfig = {0};
-
-  /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
-  */
-  hadc1.Instance = ADC1;
-  hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
-  hadc1.Init.Resolution = ADC_RESOLUTION_12B;
-  hadc1.Init.ScanConvMode = DISABLE;
-  hadc1.Init.ContinuousConvMode = DISABLE;
-  hadc1.Init.DiscontinuousConvMode = DISABLE;
-  hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
-  hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
-  hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
-  hadc1.Init.NbrOfConversion = 1;
-  hadc1.Init.DMAContinuousRequests = DISABLE;
-  hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
-  if (HAL_ADC_Init(&hadc1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /** Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
-  */
-  sConfig.Channel = ADC_CHANNEL_4;
-  sConfig.Rank = 1;
-  sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
-  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(adcHandle->Instance==ADC1)
-  {
-  /* USER CODE BEGIN ADC1_MspInit 0 */
-
-  /* USER CODE END ADC1_MspInit 0 */
-    /* ADC1 clock enable */
-    __HAL_RCC_ADC1_CLK_ENABLE();
-
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**ADC1 GPIO Configuration
-    PA4     ------> ADC1_IN4
-    */
-    GPIO_InitStruct.Pin = Themp_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    HAL_GPIO_Init(Themp_GPIO_Port, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN ADC1_MspInit 1 */
-
-  /* USER CODE END ADC1_MspInit 1 */
-  }
-}
-
-void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
-{
-
-  if(adcHandle->Instance==ADC1)
-  {
-  /* USER CODE BEGIN ADC1_MspDeInit 0 */
-
-  /* USER CODE END ADC1_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_ADC1_CLK_DISABLE();
-
-    /**ADC1 GPIO Configuration
-    PA4     ------> ADC1_IN4
-    */
-    HAL_GPIO_DeInit(Themp_GPIO_Port, Themp_Pin);
-
-  /* USER CODE BEGIN ADC1_MspDeInit 1 */
-
-  /* USER CODE END ADC1_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    adc.c
+  * @brief   This file provides code for the configuration
+  *          of the ADC instances.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "adc.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+ADC_HandleTypeDef hadc1;
+
+/* ADC1 init function */
+void MX_ADC1_Init(void)
+{
+
+  /* USER CODE BEGIN ADC1_Init 0 */
+
+  /* USER CODE END ADC1_Init 0 */
+
+  ADC_ChannelConfTypeDef sConfig = {0};
+
+  /* USER CODE BEGIN ADC1_Init 1 */
+
+  /* USER CODE END ADC1_Init 1 */
+
+  /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
+  */
+  hadc1.Instance = ADC1;
+  hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
+  hadc1.Init.Resolution = ADC_RESOLUTION_12B;
+  hadc1.Init.ScanConvMode = DISABLE;
+  hadc1.Init.ContinuousConvMode = DISABLE;
+  hadc1.Init.DiscontinuousConvMode = DISABLE;
+  hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+  hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+  hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+  hadc1.Init.NbrOfConversion = 1;
+  hadc1.Init.DMAContinuousRequests = DISABLE;
+  hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
+  if (HAL_ADC_Init(&hadc1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
+  */
+  sConfig.Channel = ADC_CHANNEL_4;
+  sConfig.Rank = 1;
+  sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN ADC1_Init 2 */
+
+  /* USER CODE END ADC1_Init 2 */
+
+}
+
+void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(adcHandle->Instance==ADC1)
+  {
+  /* USER CODE BEGIN ADC1_MspInit 0 */
+
+  /* USER CODE END ADC1_MspInit 0 */
+    /* ADC1 clock enable */
+    __HAL_RCC_ADC1_CLK_ENABLE();
+
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**ADC1 GPIO Configuration
+    PA4     ------> ADC1_IN4
+    */
+    GPIO_InitStruct.Pin = Themp_Pin;
+    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    HAL_GPIO_Init(Themp_GPIO_Port, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN ADC1_MspInit 1 */
+
+  /* USER CODE END ADC1_MspInit 1 */
+  }
+}
+
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
+{
+
+  if(adcHandle->Instance==ADC1)
+  {
+  /* USER CODE BEGIN ADC1_MspDeInit 0 */
+
+  /* USER CODE END ADC1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_ADC1_CLK_DISABLE();
+
+    /**ADC1 GPIO Configuration
+    PA4     ------> ADC1_IN4
+    */
+    HAL_GPIO_DeInit(Themp_GPIO_Port, Themp_Pin);
+
+  /* USER CODE BEGIN ADC1_MspDeInit 1 */
+
+  /* USER CODE END ADC1_MspDeInit 1 */
+  }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

Soft/STM32/Controle/Core/Src/gpio.c

@@ -1,121 +1,120 @@
-/**
-  ******************************************************************************
-  * @file    gpio.c
-  * @brief   This file provides code for the configuration
-  *          of all used GPIO pins.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "gpio.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/*----------------------------------------------------------------------------*/
-/* Configure GPIO                                                             */
-/*----------------------------------------------------------------------------*/
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/** Configure pins as
-        * Analog
-        * Input
-        * Output
-        * EVENT_OUT
-        * EXTI
-        * Free pins are configured automatically as Analog (this feature is enabled through
-        * the Code Generation settings)
-*/
-void MX_GPIO_Init(void)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-
-  /* GPIO Ports Clock Enable */
-  __HAL_RCC_GPIOC_CLK_ENABLE();
-  __HAL_RCC_GPIOH_CLK_ENABLE();
-  __HAL_RCC_GPIOA_CLK_ENABLE();
-  __HAL_RCC_GPIOB_CLK_ENABLE();
-  __HAL_RCC_GPIOD_CLK_ENABLE();
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(WC_GPIO_Port, WC_Pin, GPIO_PIN_RESET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(aquit_GPIO_Port, aquit_Pin, GPIO_PIN_RESET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOB, MFP_Pin|LED_rouge_Pin|LED_vert_Pin|LED_Orange_Pin, GPIO_PIN_RESET);
-
-  /*Configure GPIO pins : PC13 PC15 PC0 PC1
-                           PC2 PC3 PC4 PC5
-                           PC8 PC10 PC11 PC12 */
-  GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1
-                          |GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5
-                          |GPIO_PIN_8|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12;
-  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = WC_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(WC_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = aquit_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(aquit_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PA5 PA9 PA10 PA11
-                           PA12 PA15 */
-  GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
-                          |GPIO_PIN_12|GPIO_PIN_15;
-  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PBPin PBPin PBPin PBPin */
-  GPIO_InitStruct.Pin = MFP_Pin|LED_rouge_Pin|LED_vert_Pin|LED_Orange_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PB15 PB4 PB5 */
-  GPIO_InitStruct.Pin = GPIO_PIN_15|GPIO_PIN_4|GPIO_PIN_5;
-  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PD2 */
-  GPIO_InitStruct.Pin = GPIO_PIN_2;
-  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
-
-}
-
-/* USER CODE BEGIN 2 */
-
-/* USER CODE END 2 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    gpio.c
+  * @brief   This file provides code for the configuration
+  *          of all used GPIO pins.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "gpio.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/*----------------------------------------------------------------------------*/
+/* Configure GPIO                                                             */
+/*----------------------------------------------------------------------------*/
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/** Configure pins as
+        * Analog
+        * Input
+        * Output
+        * EVENT_OUT
+        * EXTI
+        * Free pins are configured automatically as Analog (this feature is enabled through
+        * the Code Generation settings)
+*/
+void MX_GPIO_Init(void)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOH_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(WC_GPIO_Port, WC_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(aquit_GPIO_Port, aquit_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOB, MFP_Pin|LED_rouge_Pin|LED_vert_Pin|LED_Orange_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pins : PC13 PC15 PC0 PC1
+                           PC2 PC3 PC4 PC5
+                           PC8 PC10 PC11 PC12 */
+  GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1
+                          |GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5
+                          |GPIO_PIN_8|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12;
+  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  /*Configure GPIO pin : PtPin */
+  GPIO_InitStruct.Pin = WC_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(WC_GPIO_Port, &GPIO_InitStruct);
+
+  /*Configure GPIO pin : PtPin */
+  GPIO_InitStruct.Pin = aquit_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(aquit_GPIO_Port, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PA5 PA9 PA10 PA11
+                           PA12 PA15 */
+  GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
+                          |GPIO_PIN_12|GPIO_PIN_15;
+  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PBPin PBPin PBPin PBPin */
+  GPIO_InitStruct.Pin = MFP_Pin|LED_rouge_Pin|LED_vert_Pin|LED_Orange_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PB15 PB4 PB5 */
+  GPIO_InitStruct.Pin = GPIO_PIN_15|GPIO_PIN_4|GPIO_PIN_5;
+  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /*Configure GPIO pin : PD2 */
+  GPIO_InitStruct.Pin = GPIO_PIN_2;
+  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+}
+
+/* USER CODE BEGIN 2 */
+
+/* USER CODE END 2 */

Soft/STM32/Controle/Core/Src/i2c.c

@@ -1,187 +1,205 @@
-/**
-  ******************************************************************************
-  * @file    i2c.c
-  * @brief   This file provides code for the configuration
-  *          of the I2C instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "i2c.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-I2C_HandleTypeDef hi2c2;
-I2C_HandleTypeDef hi2c3;
-
-/* I2C2 init function */
-void MX_I2C2_Init(void)
-{
-
-  hi2c2.Instance = I2C2;
-  hi2c2.Init.ClockSpeed = 100000;
-  hi2c2.Init.DutyCycle = I2C_DUTYCYCLE_2;
-  hi2c2.Init.OwnAddress1 = 0;
-  hi2c2.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
-  hi2c2.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
-  hi2c2.Init.OwnAddress2 = 0;
-  hi2c2.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
-  hi2c2.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
-  if (HAL_I2C_Init(&hi2c2) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-/* I2C3 init function */
-void MX_I2C3_Init(void)
-{
-
-  hi2c3.Instance = I2C3;
-  hi2c3.Init.ClockSpeed = 100000;
-  hi2c3.Init.DutyCycle = I2C_DUTYCYCLE_2;
-  hi2c3.Init.OwnAddress1 = 0;
-  hi2c3.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
-  hi2c3.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
-  hi2c3.Init.OwnAddress2 = 0;
-  hi2c3.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
-  hi2c3.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
-  if (HAL_I2C_Init(&hi2c3) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_I2C_MspInit(I2C_HandleTypeDef* i2cHandle)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(i2cHandle->Instance==I2C2)
-  {
-  /* USER CODE BEGIN I2C2_MspInit 0 */
-
-  /* USER CODE END I2C2_MspInit 0 */
-
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**I2C2 GPIO Configuration
-    PB10     ------> I2C2_SCL
-    PB3     ------> I2C2_SDA
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_10;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
-    GPIO_InitStruct.Pull = GPIO_PULLUP;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF4_I2C2;
-    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-    GPIO_InitStruct.Pin = GPIO_PIN_3;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
-    GPIO_InitStruct.Pull = GPIO_PULLUP;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF9_I2C2;
-    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-    /* I2C2 clock enable */
-    __HAL_RCC_I2C2_CLK_ENABLE();
-  /* USER CODE BEGIN I2C2_MspInit 1 */
-
-  /* USER CODE END I2C2_MspInit 1 */
-  }
-  else if(i2cHandle->Instance==I2C3)
-  {
-  /* USER CODE BEGIN I2C3_MspInit 0 */
-
-  /* USER CODE END I2C3_MspInit 0 */
-
-    __HAL_RCC_GPIOC_CLK_ENABLE();
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**I2C3 GPIO Configuration
-    PC9     ------> I2C3_SDA
-    PA8     ------> I2C3_SCL
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_9;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
-    GPIO_InitStruct.Pull = GPIO_PULLUP;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF4_I2C3;
-    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
-
-    GPIO_InitStruct.Pin = GPIO_PIN_8;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
-    GPIO_InitStruct.Pull = GPIO_PULLUP;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF4_I2C3;
-    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-    /* I2C3 clock enable */
-    __HAL_RCC_I2C3_CLK_ENABLE();
-  /* USER CODE BEGIN I2C3_MspInit 1 */
-
-  /* USER CODE END I2C3_MspInit 1 */
-  }
-}
-
-void HAL_I2C_MspDeInit(I2C_HandleTypeDef* i2cHandle)
-{
-
-  if(i2cHandle->Instance==I2C2)
-  {
-  /* USER CODE BEGIN I2C2_MspDeInit 0 */
-
-  /* USER CODE END I2C2_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_I2C2_CLK_DISABLE();
-
-    /**I2C2 GPIO Configuration
-    PB10     ------> I2C2_SCL
-    PB3     ------> I2C2_SDA
-    */
-    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10);
-
-    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3);
-
-  /* USER CODE BEGIN I2C2_MspDeInit 1 */
-
-  /* USER CODE END I2C2_MspDeInit 1 */
-  }
-  else if(i2cHandle->Instance==I2C3)
-  {
-  /* USER CODE BEGIN I2C3_MspDeInit 0 */
-
-  /* USER CODE END I2C3_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_I2C3_CLK_DISABLE();
-
-    /**I2C3 GPIO Configuration
-    PC9     ------> I2C3_SDA
-    PA8     ------> I2C3_SCL
-    */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_9);
-
-    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_8);
-
-  /* USER CODE BEGIN I2C3_MspDeInit 1 */
-
-  /* USER CODE END I2C3_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    i2c.c
+  * @brief   This file provides code for the configuration
+  *          of the I2C instances.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "i2c.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+I2C_HandleTypeDef hi2c2;
+I2C_HandleTypeDef hi2c3;
+
+/* I2C2 init function */
+void MX_I2C2_Init(void)
+{
+
+  /* USER CODE BEGIN I2C2_Init 0 */
+
+  /* USER CODE END I2C2_Init 0 */
+
+  /* USER CODE BEGIN I2C2_Init 1 */
+
+  /* USER CODE END I2C2_Init 1 */
+  hi2c2.Instance = I2C2;
+  hi2c2.Init.ClockSpeed = 100000;
+  hi2c2.Init.DutyCycle = I2C_DUTYCYCLE_2;
+  hi2c2.Init.OwnAddress1 = 0;
+  hi2c2.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
+  hi2c2.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
+  hi2c2.Init.OwnAddress2 = 0;
+  hi2c2.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
+  hi2c2.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
+  if (HAL_I2C_Init(&hi2c2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN I2C2_Init 2 */
+
+  /* USER CODE END I2C2_Init 2 */
+
+}
+/* I2C3 init function */
+void MX_I2C3_Init(void)
+{
+
+  /* USER CODE BEGIN I2C3_Init 0 */
+
+  /* USER CODE END I2C3_Init 0 */
+
+  /* USER CODE BEGIN I2C3_Init 1 */
+
+  /* USER CODE END I2C3_Init 1 */
+  hi2c3.Instance = I2C3;
+  hi2c3.Init.ClockSpeed = 10000;
+  hi2c3.Init.DutyCycle = I2C_DUTYCYCLE_2;
+  hi2c3.Init.OwnAddress1 = 0;
+  hi2c3.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
+  hi2c3.Init.DualAddressMode = I2C_DUALADDRESS_ENABLE;
+  hi2c3.Init.OwnAddress2 = 0;
+  hi2c3.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
+  hi2c3.Init.NoStretchMode = I2C_NOSTRETCH_ENABLE;
+  if (HAL_I2C_Init(&hi2c3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN I2C3_Init 2 */
+
+  /* USER CODE END I2C3_Init 2 */
+
+}
+
+void HAL_I2C_MspInit(I2C_HandleTypeDef* i2cHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(i2cHandle->Instance==I2C2)
+  {
+  /* USER CODE BEGIN I2C2_MspInit 0 */
+
+  /* USER CODE END I2C2_MspInit 0 */
+
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    /**I2C2 GPIO Configuration
+    PB10     ------> I2C2_SCL
+    PB3     ------> I2C2_SDA
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_10;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF4_I2C2;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_3;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF9_I2C2;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+    /* I2C2 clock enable */
+    __HAL_RCC_I2C2_CLK_ENABLE();
+  /* USER CODE BEGIN I2C2_MspInit 1 */
+
+  /* USER CODE END I2C2_MspInit 1 */
+  }
+  else if(i2cHandle->Instance==I2C3)
+  {
+  /* USER CODE BEGIN I2C3_MspInit 0 */
+
+  /* USER CODE END I2C3_MspInit 0 */
+
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**I2C3 GPIO Configuration
+    PC9     ------> I2C3_SDA
+    PA8     ------> I2C3_SCL
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_9;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF4_I2C3;
+    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_8;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF4_I2C3;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+    /* I2C3 clock enable */
+    __HAL_RCC_I2C3_CLK_ENABLE();
+  /* USER CODE BEGIN I2C3_MspInit 1 */
+
+  /* USER CODE END I2C3_MspInit 1 */
+  }
+}
+
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef* i2cHandle)
+{
+
+  if(i2cHandle->Instance==I2C2)
+  {
+  /* USER CODE BEGIN I2C2_MspDeInit 0 */
+
+  /* USER CODE END I2C2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_I2C2_CLK_DISABLE();
+
+    /**I2C2 GPIO Configuration
+    PB10     ------> I2C2_SCL
+    PB3     ------> I2C2_SDA
+    */
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10);
+
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3);
+
+  /* USER CODE BEGIN I2C2_MspDeInit 1 */
+
+  /* USER CODE END I2C2_MspDeInit 1 */
+  }
+  else if(i2cHandle->Instance==I2C3)
+  {
+  /* USER CODE BEGIN I2C3_MspDeInit 0 */
+
+  /* USER CODE END I2C3_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_I2C3_CLK_DISABLE();
+
+    /**I2C3 GPIO Configuration
+    PC9     ------> I2C3_SDA
+    PA8     ------> I2C3_SCL
+    */
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_9);
+
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_8);
+
+  /* USER CODE BEGIN I2C3_MspDeInit 1 */
+
+  /* USER CODE END I2C3_MspDeInit 1 */
+  }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

Soft/STM32/Controle/Core/Src/main.c

@@ -1,245 +1,328 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : main.c
-  * @brief          : Main program body
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-#include "adc.h"
-#include "i2c.h"
-#include "rtc.h"
-#include "tim.h"
-#include "usart.h"
-#include "gpio.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-#include "Tab.h"
-#include "PWM.h"
-
-
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN PTD */
-
-/* USER CODE END PTD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-#define DELAY 60000
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-
-/* USER CODE BEGIN PV */
-Sortie tabSortie[10];
-uint8_t gl_Stop;
-uint8_t gl_Essai;
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-void SystemClock_Config(void);
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/**
-  * @brief  The application entry point.
-  * @retval int
-  */
-int main(void)
-{
-  /* USER CODE BEGIN 1 */
-
-  /* USER CODE END 1 */
-
-  /* MCU Configuration--------------------------------------------------------*/
-
-  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
-  HAL_Init();
-
-  /* USER CODE BEGIN Init */
-
-  /* USER CODE END Init */
-
-  /* Configure the system clock */
-  SystemClock_Config();
-
-  /* USER CODE BEGIN SysInit */
-
-  /* USER CODE END SysInit */
-
-  /* Initialize all configured peripherals */
-  MX_GPIO_Init();
-  MX_TIM4_Init();
-  MX_TIM3_Init();
-  MX_I2C3_Init();
-  MX_I2C2_Init();
-  MX_TIM9_Init();
-  MX_TIM1_Init();
-  MX_ADC1_Init();
-  MX_TIM2_Init();
-  MX_USART6_UART_Init();
-  MX_RTC_Init();
-  /* USER CODE BEGIN 2 */
-
-  /* USER CODE END 2 */
-
-  /* Infinite loop */
-  /* USER CODE BEGIN WHILE */
-  while (1)
-  {
-
-	if(gl_Essai){//EN essai
-		Essai();
-	}
-	else if(gl_Stop){//Tous arreté
-		Stop();
-	}
-	else{//Fonctionnement normal
-		uint16_t Hmin = ReadHeureMin();
-		GerePWM(Hmin);
-	}
-	  HAL_Delay(DELAY);
-    /* USER CODE END WHILE */
-
-    /* USER CODE BEGIN 3 */
-  }
-  /* USER CODE END 3 */
-}
-
-/**
-  * @brief System Clock Configuration
-  * @retval None
-  */
-void SystemClock_Config(void)
-{
-  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
-  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
-  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
-
-  /** Configure the main internal regulator output voltage
-  */
-  __HAL_RCC_PWR_CLK_ENABLE();
-  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
-  /** Initializes the RCC Oscillators according to the specified parameters
-  * in the RCC_OscInitTypeDef structure.
-  */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE;
-  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
-  RCC_OscInitStruct.LSIState = RCC_LSI_ON;
-  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
-  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
-  RCC_OscInitStruct.PLL.PLLM = 25;
-  RCC_OscInitStruct.PLL.PLLN = 336;
-  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
-  RCC_OscInitStruct.PLL.PLLQ = 7;
-  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /** Initializes the CPU, AHB and APB buses clocks
-  */
-  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
-                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
-  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
-  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
-  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
-  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
-
-  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
-  PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
-  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
-  {
-    Error_Handler();
-  }
-}
-
-/* USER CODE BEGIN 4 */
-
-/* USER CODE END 4 */
-
- /**
-  * @brief  Period elapsed callback in non blocking mode
-  * @note   This function is called  when TIM5 interrupt took place, inside
-  * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
-  * a global variable "uwTick" used as application time base.
-  * @param  htim : TIM handle
-  * @retval None
-  */
-void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
-{
-  /* USER CODE BEGIN Callback 0 */
-
-  /* USER CODE END Callback 0 */
-  if (htim->Instance == TIM5) {
-    HAL_IncTick();
-  }
-  /* USER CODE BEGIN Callback 1 */
-
-  /* USER CODE END Callback 1 */
-}
-
-/**
-  * @brief  This function is executed in case of error occurrence.
-  * @retval None
-  */
-void Error_Handler(void)
-{
-  /* USER CODE BEGIN Error_Handler_Debug */
-  /* User can add his own implementation to report the HAL error return state */
-  __disable_irq();
-  while (1)
-  {
-  }
-  /* USER CODE END Error_Handler_Debug */
-}
-
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
-  * @param  file: pointer to the source file name
-  * @param  line: assert_param error line source number
-  * @retval None
-  */
-void assert_failed(uint8_t *file, uint32_t line)
-{
-  /* USER CODE BEGIN 6 */
-  /* User can add his own implementation to report the file name and line number,
-     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-  /* USER CODE END 6 */
-}
-#endif /* USE_FULL_ASSERT */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "adc.h"
+#include "i2c.h"
+#include "rtc.h"
+#include "tim.h"
+#include "usart.h"
+#include "gpio.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+#include "Tab.h"
+#include "PWM.h"
+#include "Comunication.h"
+
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+#define DELAY 10000
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+Sortie tabSortie[10];
+uint8_t gl_Stop;
+uint8_t gl_Essai;
+uint8_t RX_uart[SizeMes];
+uint8_t erreur = 0;
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) {
+	__HAL_TIM_SET_COUNTER(&htim10,0);
+	HAL_TIM_Base_Start_IT(&htim10);
+	parse(RX_uart);
+	HAL_UART_Receive_IT(&huart6, RX_uart, 8);
+}
+
+uint16_t ReadEepromHeure(uint8_t add){
+	uint8_t tab[2];
+	if (readEeprom(add, tab,2)!=HAL_OK){
+		/*
+		 * Grosse merde ca fonctionne pas du tout
+		 * Mettre les valeurs a :
+		 * 		Demmarage = 9H
+		 * 		Extinxtion = 20H
+		 * 		PuissanceMax = 50%
+		 * 		Pente = 0
+		 */
+		if (add%5==0)//Si demmarage
+			return 9*60;
+		else
+			return 20*60;
+	}
+	return tab[0]*60+tab[1];
+}
+
+uint8_t ReadEepromVal(uint8_t add){
+	uint8_t tab[1];
+	if (readEeprom(add, tab,1)!=HAL_OK){
+		/*
+		 * Grosse merde ca fonctionne pas du tout
+		 * Mettre les valeurs a :
+		 * 		Demmarage = 9H
+		 * 		Extinxtion = 20H
+		 * 		PuissanceMax = 50%
+		 * 		Pente = 0
+		 */
+		return 50;
+	}
+	return tab[0];
+
+}
+
+void ChargeEeprom(){
+	for(int i = 0; i<10; i++){
+		tabSortie[i].Extinxtion = ReadEepromHeure(i*5);
+		tabSortie[i].Demmarage = ReadEepromHeure(i*5+2);
+		tabSortie[i].PuissanceMax = ReadEepromVal(i*5+3);
+		tabSortie[i].Pente= ReadEepromVal(i*5+4);
+	}
+	gl_Stop = 0;
+	gl_Essai = 0;
+}
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+  /* USER CODE BEGIN 1 */
+
+
+	/*
+	 * Fonctionnement de l'algo
+	 *
+	 * On initialise :
+	 * 	- Cube MX
+	 * 	- Eeprom
+	 * 	- On charge les valeur de l'Eeprom
+	 * 	- On demarre la reception de L'Uart
+	 *
+	 * Si le Blynk est en vie
+	 * 		on recoit un status, Le code erreur etant a 1 l'ESP32 nous renvoie toute les valeurs
+	 * 		A partir de ce moment l'ESP doit envoyer un Heart bit avant la fin du timer sinon on restart
+	 * 		A chaque commande on ecrit la valeurs dans l'EEPROM
+	 *
+	 * Si le Blynk est eteint
+	 * 		On fonctionne sur les valeurs de l'Eeprom
+	 * 		On repart sur le fonctionnement "normal" des que l'ESP envoie une commande
+	 */
+
+
+
+
+  /* USER CODE END 1 */
+
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* Configure the system clock */
+  SystemClock_Config();
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
+  MX_TIM2_Init();
+  MX_TIM3_Init();
+  MX_TIM4_Init();
+  MX_TIM9_Init();
+  MX_I2C3_Init();
+  MX_I2C2_Init();
+  MX_ADC1_Init();
+  MX_USART6_UART_Init();
+  MX_RTC_Init();
+  MX_TIM10_Init();
+  /* USER CODE BEGIN 2 */
+
+
+  initEprom(&hi2c3,WC_GPIO_Port,WC_Pin);
+
+  //On charge les valeur de l'Eeprom
+  ChargeEeprom();
+
+  //initialise le timer de heard beat et l'uart
+  erreur=1;
+  __HAL_TIM_CLEAR_FLAG(&htim10, TIM_FLAG_UPDATE);
+  HAL_UART_Receive_IT(&huart6, RX_uart, 8);
+
+  /* USER CODE END 2 */
+
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+
+  while (1){
+	 if(gl_Essai){//EN essai
+		Essai();
+	}
+	else if(gl_Stop){//Tous arreté
+		Stop();
+	}
+	else{//Fonctionnement normal
+		uint16_t Hmin = ReadHeureMin();
+		GerePWM(Hmin);
+	}
+	  HAL_Delay(DELAY);
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+  /** Configure the main internal regulator output voltage
+  */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.LSIState = RCC_LSI_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 25;
+  RCC_OscInitStruct.PLL.PLLN = 336;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
+  RCC_OscInitStruct.PLL.PLLQ = 7;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Initializes the CPU, AHB and APB buses clocks
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  Period elapsed callback in non blocking mode
+  * @note   This function is called  when TIM5 interrupt took place, inside
+  * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
+  * a global variable "uwTick" used as application time base.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+  /* USER CODE BEGIN Callback 0 */
+
+  /* USER CODE END Callback 0 */
+  if (htim->Instance == TIM5) {
+    HAL_IncTick();
+  }
+  /* USER CODE BEGIN Callback 1 */
+
+  /* USER CODE END Callback 1 */
+}
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+	//TODO a refaire l'erreur handler pour envoyer en reset
+  /* User can add his own implementation to report the HAL error return state */
+  __disable_irq();
+  while (1)
+  {
+  }
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */

Soft/STM32/Controle/Core/Src/rtc.c

@@ -1,97 +1,111 @@
-/**
-  ******************************************************************************
-  * @file    rtc.c
-  * @brief   This file provides code for the configuration
-  *          of the RTC instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "rtc.h"
-
-/* USER CODE BEGIN 0 */
-uint16_t ReadHeureMin(void){
-	RTC_TimeTypeDef sTime;
-	HAL_RTC_GetTime(&hrtc, &sTime,RTC_FORMAT_BCD);
-	return sTime.Hours*60+sTime.Minutes;
-}
-
-HAL_StatusTypeDef WriteTime(RTC_TimeTypeDef *sTime,RTC_DateTypeDef *sDate){
-	HAL_StatusTypeDef res;
-	if (( res = HAL_RTC_SetTime(&hrtc, sTime, RTC_FORMAT_BCD)) != HAL_OK)
-		return res;
-	return HAL_RTC_SetDate(&hrtc, &sDate, RTC_FORMAT_BCD);
-}
-
-/* USER CODE END 0 */
-
-RTC_HandleTypeDef hrtc;
-
-/* RTC init function */
-void MX_RTC_Init(void)
-{
-
-  /** Initialize RTC Only
-  */
-  hrtc.Instance = RTC;
-  hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
-  hrtc.Init.AsynchPrediv = 127;
-  hrtc.Init.SynchPrediv = 255;
-  hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
-  hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
-  hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-  if (HAL_RTC_Init(&hrtc) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_RTC_MspInit(RTC_HandleTypeDef* rtcHandle)
-{
-
-  if(rtcHandle->Instance==RTC)
-  {
-  /* USER CODE BEGIN RTC_MspInit 0 */
-
-  /* USER CODE END RTC_MspInit 0 */
-    /* RTC clock enable */
-    __HAL_RCC_RTC_ENABLE();
-  /* USER CODE BEGIN RTC_MspInit 1 */
-
-  /* USER CODE END RTC_MspInit 1 */
-  }
-}
-
-void HAL_RTC_MspDeInit(RTC_HandleTypeDef* rtcHandle)
-{
-
-  if(rtcHandle->Instance==RTC)
-  {
-  /* USER CODE BEGIN RTC_MspDeInit 0 */
-
-  /* USER CODE END RTC_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_RTC_DISABLE();
-  /* USER CODE BEGIN RTC_MspDeInit 1 */
-
-  /* USER CODE END RTC_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    rtc.c
+  * @brief   This file provides code for the configuration
+  *          of the RTC instances.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "rtc.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+RTC_HandleTypeDef hrtc;
+
+/* RTC init function */
+void MX_RTC_Init(void)
+{
+
+  /* USER CODE BEGIN RTC_Init 0 */
+
+  /* USER CODE END RTC_Init 0 */
+
+  /* USER CODE BEGIN RTC_Init 1 */
+
+  /* USER CODE END RTC_Init 1 */
+
+  /** Initialize RTC Only
+  */
+  hrtc.Instance = RTC;
+  hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
+  hrtc.Init.AsynchPrediv = 127;
+  hrtc.Init.SynchPrediv = 255;
+  hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
+  hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
+  hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
+  if (HAL_RTC_Init(&hrtc) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN RTC_Init 2 */
+
+  /* USER CODE END RTC_Init 2 */
+
+}
+
+void HAL_RTC_MspInit(RTC_HandleTypeDef* rtcHandle)
+{
+
+  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
+  if(rtcHandle->Instance==RTC)
+  {
+  /* USER CODE BEGIN RTC_MspInit 0 */
+
+  /* USER CODE END RTC_MspInit 0 */
+
+  /** Initializes the peripherals clock
+  */
+    PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
+    PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+    /* RTC clock enable */
+    __HAL_RCC_RTC_ENABLE();
+  /* USER CODE BEGIN RTC_MspInit 1 */
+
+  /* USER CODE END RTC_MspInit 1 */
+  }
+}
+
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef* rtcHandle)
+{
+
+  if(rtcHandle->Instance==RTC)
+  {
+  /* USER CODE BEGIN RTC_MspDeInit 0 */
+
+  /* USER CODE END RTC_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_RTC_DISABLE();
+  /* USER CODE BEGIN RTC_MspDeInit 1 */
+
+  /* USER CODE END RTC_MspDeInit 1 */
+  }
+}
+
+/* USER CODE BEGIN 1 */
+uint16_t ReadHeureMin(){
+	RTC_TimeTypeDef gTime;
+	HAL_RTC_GetTime(&hrtc, &gTime, RTC_FORMAT_BIN);
+	return gTime.Hours*60+gTime.Minutes;
+}
+
+
+/* USER CODE END 1 */

Soft/STM32/Controle/Core/Src/stm32f4xx_hal_msp.c

@@ -1,84 +1,81 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file         stm32f4xx_hal_msp.c
-  * @brief        This file provides code for the MSP Initialization
-  *               and de-Initialization codes.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN TD */
-
-/* USER CODE END TD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN Define */
-
-/* USER CODE END Define */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN Macro */
-
-/* USER CODE END Macro */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* External functions --------------------------------------------------------*/
-/* USER CODE BEGIN ExternalFunctions */
-
-/* USER CODE END ExternalFunctions */
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-/**
-  * Initializes the Global MSP.
-  */
-void HAL_MspInit(void)
-{
-  /* USER CODE BEGIN MspInit 0 */
-
-  /* USER CODE END MspInit 0 */
-
-  __HAL_RCC_SYSCFG_CLK_ENABLE();
-  __HAL_RCC_PWR_CLK_ENABLE();
-
-  /* System interrupt init*/
-
-  /* USER CODE BEGIN MspInit 1 */
-
-  /* USER CODE END MspInit 1 */
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file         stm32f4xx_hal_msp.c
+  * @brief        This file provides code for the MSP Initialization
+  *               and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* System interrupt init*/
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

Soft/STM32/Controle/Core/Src/stm32f4xx_hal_timebase_tim.c

@@ -1,111 +1,111 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_timebase_TIM.c
-  * @brief   HAL time base based on the hardware TIM.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-#include "stm32f4xx_hal_tim.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-TIM_HandleTypeDef        htim5;
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/**
-  * @brief  This function configures the TIM5 as a time base source.
-  *         The time source is configured  to have 1ms time base with a dedicated
-  *         Tick interrupt priority.
-  * @note   This function is called  automatically at the beginning of program after
-  *         reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig().
-  * @param  TickPriority: Tick interrupt priority.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
-{
-  RCC_ClkInitTypeDef    clkconfig;
-  uint32_t              uwTimclock = 0;
-  uint32_t              uwPrescalerValue = 0;
-  uint32_t              pFLatency;
-  /*Configure the TIM5 IRQ priority */
-  HAL_NVIC_SetPriority(TIM5_IRQn, TickPriority ,0);
-
-  /* Enable the TIM5 global Interrupt */
-  HAL_NVIC_EnableIRQ(TIM5_IRQn);
-  /* Enable TIM5 clock */
-  __HAL_RCC_TIM5_CLK_ENABLE();
-
-  /* Get clock configuration */
-  HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
-
-  /* Compute TIM5 clock */
-  uwTimclock = 2*HAL_RCC_GetPCLK1Freq();
-  /* Compute the prescaler value to have TIM5 counter clock equal to 1MHz */
-  uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000U) - 1U);
-
-  /* Initialize TIM5 */
-  htim5.Instance = TIM5;
-
-  /* Initialize TIMx peripheral as follow:
-  + Period = [(TIM5CLK/1000) - 1]. to have a (1/1000) s time base.
-  + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
-  + ClockDivision = 0
-  + Counter direction = Up
-  */
-  htim5.Init.Period = (1000000U / 1000U) - 1U;
-  htim5.Init.Prescaler = uwPrescalerValue;
-  htim5.Init.ClockDivision = 0;
-  htim5.Init.CounterMode = TIM_COUNTERMODE_UP;
-  if(HAL_TIM_Base_Init(&htim5) == HAL_OK)
-  {
-    /* Start the TIM time Base generation in interrupt mode */
-    return HAL_TIM_Base_Start_IT(&htim5);
-  }
-
-  /* Return function status */
-  return HAL_ERROR;
-}
-
-/**
-  * @brief  Suspend Tick increment.
-  * @note   Disable the tick increment by disabling TIM5 update interrupt.
-  * @param  None
-  * @retval None
-  */
-void HAL_SuspendTick(void)
-{
-  /* Disable TIM5 update Interrupt */
-  __HAL_TIM_DISABLE_IT(&htim5, TIM_IT_UPDATE);
-}
-
-/**
-  * @brief  Resume Tick increment.
-  * @note   Enable the tick increment by Enabling TIM5 update interrupt.
-  * @param  None
-  * @retval None
-  */
-void HAL_ResumeTick(void)
-{
-  /* Enable TIM5 Update interrupt */
-  __HAL_TIM_ENABLE_IT(&htim5, TIM_IT_UPDATE);
-}
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_timebase_TIM.c
+  * @brief   HAL time base based on the hardware TIM.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+#include "stm32f4xx_hal_tim.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+TIM_HandleTypeDef        htim5;
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @brief  This function configures the TIM5 as a time base source.
+  *         The time source is configured  to have 1ms time base with a dedicated
+  *         Tick interrupt priority.
+  * @note   This function is called  automatically at the beginning of program after
+  *         reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig().
+  * @param  TickPriority: Tick interrupt priority.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+  RCC_ClkInitTypeDef    clkconfig;
+  uint32_t              uwTimclock = 0;
+  uint32_t              uwPrescalerValue = 0;
+  uint32_t              pFLatency;
+  /*Configure the TIM5 IRQ priority */
+  HAL_NVIC_SetPriority(TIM5_IRQn, TickPriority ,0);
+
+  /* Enable the TIM5 global Interrupt */
+  HAL_NVIC_EnableIRQ(TIM5_IRQn);
+
+  /* Enable TIM5 clock */
+  __HAL_RCC_TIM5_CLK_ENABLE();
+
+  /* Get clock configuration */
+  HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
+
+  /* Compute TIM5 clock */
+  uwTimclock = 2*HAL_RCC_GetPCLK1Freq();
+  /* Compute the prescaler value to have TIM5 counter clock equal to 1MHz */
+  uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000U) - 1U);
+
+  /* Initialize TIM5 */
+  htim5.Instance = TIM5;
+
+  /* Initialize TIMx peripheral as follow:
+  + Period = [(TIM5CLK/1000) - 1]. to have a (1/1000) s time base.
+  + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
+  + ClockDivision = 0
+  + Counter direction = Up
+  */
+  htim5.Init.Period = (1000000U / 1000U) - 1U;
+  htim5.Init.Prescaler = uwPrescalerValue;
+  htim5.Init.ClockDivision = 0;
+  htim5.Init.CounterMode = TIM_COUNTERMODE_UP;
+
+  if(HAL_TIM_Base_Init(&htim5) == HAL_OK)
+  {
+    /* Start the TIM time Base generation in interrupt mode */
+    return HAL_TIM_Base_Start_IT(&htim5);
+  }
+
+  /* Return function status */
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  Suspend Tick increment.
+  * @note   Disable the tick increment by disabling TIM5 update interrupt.
+  * @param  None
+  * @retval None
+  */
+void HAL_SuspendTick(void)
+{
+  /* Disable TIM5 update Interrupt */
+  __HAL_TIM_DISABLE_IT(&htim5, TIM_IT_UPDATE);
+}
+
+/**
+  * @brief  Resume Tick increment.
+  * @note   Enable the tick increment by Enabling TIM5 update interrupt.
+  * @param  None
+  * @retval None
+  */
+void HAL_ResumeTick(void)
+{
+  /* Enable TIM5 Update interrupt */
+  __HAL_TIM_ENABLE_IT(&htim5, TIM_IT_UPDATE);
+}
+

Soft/STM32/Controle/Core/Src/stm32f4xx_it.c

@@ -1,235 +1,253 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_it.c
-  * @brief   Interrupt Service Routines.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-#include "stm32f4xx_it.h"
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN TD */
-
-/* USER CODE END TD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/* External variables --------------------------------------------------------*/
-extern UART_HandleTypeDef huart6;
-extern TIM_HandleTypeDef htim5;
-
-/* USER CODE BEGIN EV */
-
-/* USER CODE END EV */
-
-/******************************************************************************/
-/*           Cortex-M4 Processor Interruption and Exception Handlers          */
-/******************************************************************************/
-/**
-  * @brief This function handles Non maskable interrupt.
-  */
-void NMI_Handler(void)
-{
-  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
-
-  /* USER CODE END NonMaskableInt_IRQn 0 */
-  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
-  while (1)
-  {
-  }
-  /* USER CODE END NonMaskableInt_IRQn 1 */
-}
-
-/**
-  * @brief This function handles Hard fault interrupt.
-  */
-void HardFault_Handler(void)
-{
-  /* USER CODE BEGIN HardFault_IRQn 0 */
-
-  /* USER CODE END HardFault_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
-    /* USER CODE END W1_HardFault_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Memory management fault.
-  */
-void MemManage_Handler(void)
-{
-  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
-
-  /* USER CODE END MemoryManagement_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
-    /* USER CODE END W1_MemoryManagement_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Pre-fetch fault, memory access fault.
-  */
-void BusFault_Handler(void)
-{
-  /* USER CODE BEGIN BusFault_IRQn 0 */
-
-  /* USER CODE END BusFault_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
-    /* USER CODE END W1_BusFault_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Undefined instruction or illegal state.
-  */
-void UsageFault_Handler(void)
-{
-  /* USER CODE BEGIN UsageFault_IRQn 0 */
-
-  /* USER CODE END UsageFault_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
-    /* USER CODE END W1_UsageFault_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles System service call via SWI instruction.
-  */
-void SVC_Handler(void)
-{
-  /* USER CODE BEGIN SVCall_IRQn 0 */
-
-  /* USER CODE END SVCall_IRQn 0 */
-  /* USER CODE BEGIN SVCall_IRQn 1 */
-
-  /* USER CODE END SVCall_IRQn 1 */
-}
-
-/**
-  * @brief This function handles Debug monitor.
-  */
-void DebugMon_Handler(void)
-{
-  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
-
-  /* USER CODE END DebugMonitor_IRQn 0 */
-  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
-
-  /* USER CODE END DebugMonitor_IRQn 1 */
-}
-
-/**
-  * @brief This function handles Pendable request for system service.
-  */
-void PendSV_Handler(void)
-{
-  /* USER CODE BEGIN PendSV_IRQn 0 */
-
-  /* USER CODE END PendSV_IRQn 0 */
-  /* USER CODE BEGIN PendSV_IRQn 1 */
-
-  /* USER CODE END PendSV_IRQn 1 */
-}
-
-/**
-  * @brief This function handles System tick timer.
-  */
-void SysTick_Handler(void)
-{
-  /* USER CODE BEGIN SysTick_IRQn 0 */
-
-  /* USER CODE END SysTick_IRQn 0 */
-
-  /* USER CODE BEGIN SysTick_IRQn 1 */
-
-  /* USER CODE END SysTick_IRQn 1 */
-}
-
-/******************************************************************************/
-/* STM32F4xx Peripheral Interrupt Handlers                                    */
-/* Add here the Interrupt Handlers for the used peripherals.                  */
-/* For the available peripheral interrupt handler names,                      */
-/* please refer to the startup file (startup_stm32f4xx.s).                    */
-/******************************************************************************/
-
-/**
-  * @brief This function handles TIM5 global interrupt.
-  */
-void TIM5_IRQHandler(void)
-{
-  /* USER CODE BEGIN TIM5_IRQn 0 */
-
-  /* USER CODE END TIM5_IRQn 0 */
-  HAL_TIM_IRQHandler(&htim5);
-  /* USER CODE BEGIN TIM5_IRQn 1 */
-
-  /* USER CODE END TIM5_IRQn 1 */
-}
-
-/**
-  * @brief This function handles USART6 global interrupt.
-  */
-void USART6_IRQHandler(void)
-{
-  /* USER CODE BEGIN USART6_IRQn 0 */
-
-  /* USER CODE END USART6_IRQn 0 */
-  HAL_UART_IRQHandler(&huart6);
-  /* USER CODE BEGIN USART6_IRQn 1 */
-
-  /* USER CODE END USART6_IRQn 1 */
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f4xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+extern TIM_HandleTypeDef htim1;
+extern TIM_HandleTypeDef htim10;
+extern UART_HandleTypeDef huart6;
+extern TIM_HandleTypeDef htim5;
+
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M4 Processor Interruption and Exception Handlers          */
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+  while (1)
+  {
+  }
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Pre-fetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F4xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32f4xx.s).                    */
+/******************************************************************************/
+
+/**
+  * @brief This function handles TIM1 update interrupt and TIM10 global interrupt.
+  */
+void TIM1_UP_TIM10_IRQHandler(void)
+{
+  /* USER CODE BEGIN TIM1_UP_TIM10_IRQn 0 */
+
+
+  /* USER CODE END TIM1_UP_TIM10_IRQn 0 */
+  HAL_TIM_IRQHandler(&htim1);
+  HAL_TIM_IRQHandler(&htim10);
+  /* USER CODE BEGIN TIM1_UP_TIM10_IRQn 1 */
+  HAL_NVIC_SystemReset();
+
+  /* USER CODE END TIM1_UP_TIM10_IRQn 1 */
+}
+
+/**
+  * @brief This function handles TIM5 global interrupt.
+  */
+void TIM5_IRQHandler(void)
+{
+  /* USER CODE BEGIN TIM5_IRQn 0 */
+
+  /* USER CODE END TIM5_IRQn 0 */
+  HAL_TIM_IRQHandler(&htim5);
+  /* USER CODE BEGIN TIM5_IRQn 1 */
+
+  /* USER CODE END TIM5_IRQn 1 */
+}
+
+/**
+  * @brief This function handles USART6 global interrupt.
+  */
+void USART6_IRQHandler(void)
+{
+  /* USER CODE BEGIN USART6_IRQn 0 */
+
+  /* USER CODE END USART6_IRQn 0 */
+  HAL_UART_IRQHandler(&huart6);
+  /* USER CODE BEGIN USART6_IRQn 1 */
+
+  /* USER CODE END USART6_IRQn 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+
+/* USER CODE END 1 */

Soft/STM32/Controle/Core/Src/system_stm32f4xx.c

@@ -1,727 +1,747 @@
-/**
-  ******************************************************************************
-  * @file    system_stm32f4xx.c
-  * @author  MCD Application Team
-  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
-  *
-  *   This file provides two functions and one global variable to be called from 
-  *   user application:
-  *      - SystemInit(): This function is called at startup just after reset and 
-  *                      before branch to main program. This call is made inside
-  *                      the "startup_stm32f4xx.s" file.
-  *
-  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
-  *                                  by the user application to setup the SysTick 
-  *                                  timer or configure other parameters.
-  *                                     
-  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
-  *                                 be called whenever the core clock is changed
-  *                                 during program execution.
-  *
-  *
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f4xx_system
-  * @{
-  */  
-  
-/** @addtogroup STM32F4xx_System_Private_Includes
-  * @{
-  */
-
-
-#include "stm32f4xx.h"
-
-#if !defined  (HSE_VALUE) 
-  #define HSE_VALUE    ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F4xx_System_Private_Defines
-  * @{
-  */
-
-/************************* Miscellaneous Configuration ************************/
-/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory  */
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
- || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
- || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
-/* #define DATA_IN_ExtSRAM */
-#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
-          STM32F412Zx || STM32F412Vx */
- 
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
- || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
-/* #define DATA_IN_ExtSDRAM */
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
-          STM32F479xx */
-
-/*!< Uncomment the following line if you need to relocate your vector Table in
-     Internal SRAM. */
-/* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field. 
-                                   This value must be a multiple of 0x200. */
-/******************************************************************************/
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F4xx_System_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F4xx_System_Private_Variables
-  * @{
-  */
-  /* This variable is updated in three ways:
-      1) by calling CMSIS function SystemCoreClockUpdate()
-      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
-      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
-         Note: If you use this function to configure the system clock; then there
-               is no need to call the 2 first functions listed above, since SystemCoreClock
-               variable is updated automatically.
-  */
-uint32_t SystemCoreClock = 16000000;
-const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-const uint8_t APBPrescTable[8]  = {0, 0, 0, 0, 1, 2, 3, 4};
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
-  * @{
-  */
-
-#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
-  static void SystemInit_ExtMemCtl(void); 
-#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F4xx_System_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Setup the microcontroller system
-  *         Initialize the FPU setting, vector table location and External memory 
-  *         configuration.
-  * @param  None
-  * @retval None
-  */
-void SystemInit(void)
-{
-  /* FPU settings ------------------------------------------------------------*/
-  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
-    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
-  #endif
-
-#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
-  SystemInit_ExtMemCtl(); 
-#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
-
-  /* Configure the Vector Table location add offset address ------------------*/
-#ifdef VECT_TAB_SRAM
-  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
-#else
-  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
-#endif
-}
-
-/**
-   * @brief  Update SystemCoreClock variable according to Clock Register Values.
-  *         The SystemCoreClock variable contains the core clock (HCLK), it can
-  *         be used by the user application to setup the SysTick timer or configure
-  *         other parameters.
-  *           
-  * @note   Each time the core clock (HCLK) changes, this function must be called
-  *         to update SystemCoreClock variable value. Otherwise, any configuration
-  *         based on this variable will be incorrect.         
-  *     
-  * @note   - The system frequency computed by this function is not the real 
-  *           frequency in the chip. It is calculated based on the predefined 
-  *           constant and the selected clock source:
-  *             
-  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
-  *                                              
-  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
-  *                          
-  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
-  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
-  *         
-  *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
-  *             16 MHz) but the real value may vary depending on the variations
-  *             in voltage and temperature.   
-  *    
-  *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
-  *              depends on the application requirements), user has to ensure that HSE_VALUE
-  *              is same as the real frequency of the crystal used. Otherwise, this function
-  *              may have wrong result.
-  *                
-  *         - The result of this function could be not correct when using fractional
-  *           value for HSE crystal.
-  *     
-  * @param  None
-  * @retval None
-  */
-void SystemCoreClockUpdate(void)
-{
-  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
-  
-  /* Get SYSCLK source -------------------------------------------------------*/
-  tmp = RCC->CFGR & RCC_CFGR_SWS;
-
-  switch (tmp)
-  {
-    case 0x00:  /* HSI used as system clock source */
-      SystemCoreClock = HSI_VALUE;
-      break;
-    case 0x04:  /* HSE used as system clock source */
-      SystemCoreClock = HSE_VALUE;
-      break;
-    case 0x08:  /* PLL used as system clock source */
-
-      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
-         SYSCLK = PLL_VCO / PLL_P
-         */    
-      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
-      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
-      
-      if (pllsource != 0)
-      {
-        /* HSE used as PLL clock source */
-        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
-      }
-      else
-      {
-        /* HSI used as PLL clock source */
-        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
-      }
-
-      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
-      SystemCoreClock = pllvco/pllp;
-      break;
-    default:
-      SystemCoreClock = HSI_VALUE;
-      break;
-  }
-  /* Compute HCLK frequency --------------------------------------------------*/
-  /* Get HCLK prescaler */
-  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
-  /* HCLK frequency */
-  SystemCoreClock >>= tmp;
-}
-
-#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
- || defined(STM32F469xx) || defined(STM32F479xx)
-/**
-  * @brief  Setup the external memory controller.
-  *         Called in startup_stm32f4xx.s before jump to main.
-  *         This function configures the external memories (SRAM/SDRAM)
-  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
-  * @param  None
-  * @retval None
-  */
-void SystemInit_ExtMemCtl(void)
-{
-  __IO uint32_t tmp = 0x00;
-
-  register uint32_t tmpreg = 0, timeout = 0xFFFF;
-  register __IO uint32_t index;
-
-  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
-  RCC->AHB1ENR |= 0x000001F8;
-
-  /* Delay after an RCC peripheral clock enabling */
-  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
-  
-  /* Connect PDx pins to FMC Alternate function */
-  GPIOD->AFR[0]  = 0x00CCC0CC;
-  GPIOD->AFR[1]  = 0xCCCCCCCC;
-  /* Configure PDx pins in Alternate function mode */  
-  GPIOD->MODER   = 0xAAAA0A8A;
-  /* Configure PDx pins speed to 100 MHz */  
-  GPIOD->OSPEEDR = 0xFFFF0FCF;
-  /* Configure PDx pins Output type to push-pull */  
-  GPIOD->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PDx pins */ 
-  GPIOD->PUPDR   = 0x00000000;
-
-  /* Connect PEx pins to FMC Alternate function */
-  GPIOE->AFR[0]  = 0xC00CC0CC;
-  GPIOE->AFR[1]  = 0xCCCCCCCC;
-  /* Configure PEx pins in Alternate function mode */ 
-  GPIOE->MODER   = 0xAAAA828A;
-  /* Configure PEx pins speed to 100 MHz */ 
-  GPIOE->OSPEEDR = 0xFFFFC3CF;
-  /* Configure PEx pins Output type to push-pull */  
-  GPIOE->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PEx pins */ 
-  GPIOE->PUPDR   = 0x00000000;
-  
-  /* Connect PFx pins to FMC Alternate function */
-  GPIOF->AFR[0]  = 0xCCCCCCCC;
-  GPIOF->AFR[1]  = 0xCCCCCCCC;
-  /* Configure PFx pins in Alternate function mode */   
-  GPIOF->MODER   = 0xAA800AAA;
-  /* Configure PFx pins speed to 50 MHz */ 
-  GPIOF->OSPEEDR = 0xAA800AAA;
-  /* Configure PFx pins Output type to push-pull */  
-  GPIOF->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PFx pins */ 
-  GPIOF->PUPDR   = 0x00000000;
-
-  /* Connect PGx pins to FMC Alternate function */
-  GPIOG->AFR[0]  = 0xCCCCCCCC;
-  GPIOG->AFR[1]  = 0xCCCCCCCC;
-  /* Configure PGx pins in Alternate function mode */ 
-  GPIOG->MODER   = 0xAAAAAAAA;
-  /* Configure PGx pins speed to 50 MHz */ 
-  GPIOG->OSPEEDR = 0xAAAAAAAA;
-  /* Configure PGx pins Output type to push-pull */  
-  GPIOG->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PGx pins */ 
-  GPIOG->PUPDR   = 0x00000000;
-  
-  /* Connect PHx pins to FMC Alternate function */
-  GPIOH->AFR[0]  = 0x00C0CC00;
-  GPIOH->AFR[1]  = 0xCCCCCCCC;
-  /* Configure PHx pins in Alternate function mode */ 
-  GPIOH->MODER   = 0xAAAA08A0;
-  /* Configure PHx pins speed to 50 MHz */ 
-  GPIOH->OSPEEDR = 0xAAAA08A0;
-  /* Configure PHx pins Output type to push-pull */  
-  GPIOH->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PHx pins */ 
-  GPIOH->PUPDR   = 0x00000000;
-  
-  /* Connect PIx pins to FMC Alternate function */
-  GPIOI->AFR[0]  = 0xCCCCCCCC;
-  GPIOI->AFR[1]  = 0x00000CC0;
-  /* Configure PIx pins in Alternate function mode */ 
-  GPIOI->MODER   = 0x0028AAAA;
-  /* Configure PIx pins speed to 50 MHz */ 
-  GPIOI->OSPEEDR = 0x0028AAAA;
-  /* Configure PIx pins Output type to push-pull */  
-  GPIOI->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PIx pins */ 
-  GPIOI->PUPDR   = 0x00000000;
-  
-/*-- FMC Configuration -------------------------------------------------------*/
-  /* Enable the FMC interface clock */
-  RCC->AHB3ENR |= 0x00000001;
-  /* Delay after an RCC peripheral clock enabling */
-  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
-
-  FMC_Bank5_6->SDCR[0] = 0x000019E4;
-  FMC_Bank5_6->SDTR[0] = 0x01115351;      
-  
-  /* SDRAM initialization sequence */
-  /* Clock enable command */
-  FMC_Bank5_6->SDCMR = 0x00000011; 
-  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  while((tmpreg != 0) && (timeout-- > 0))
-  {
-    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  }
-
-  /* Delay */
-  for (index = 0; index<1000; index++);
-  
-  /* PALL command */
-  FMC_Bank5_6->SDCMR = 0x00000012;           
-  timeout = 0xFFFF;
-  while((tmpreg != 0) && (timeout-- > 0))
-  {
-    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  }
-  
-  /* Auto refresh command */
-  FMC_Bank5_6->SDCMR = 0x00000073;
-  timeout = 0xFFFF;
-  while((tmpreg != 0) && (timeout-- > 0))
-  {
-    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  }
- 
-  /* MRD register program */
-  FMC_Bank5_6->SDCMR = 0x00046014;
-  timeout = 0xFFFF;
-  while((tmpreg != 0) && (timeout-- > 0))
-  {
-    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  } 
-  
-  /* Set refresh count */
-  tmpreg = FMC_Bank5_6->SDRTR;
-  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
-  
-  /* Disable write protection */
-  tmpreg = FMC_Bank5_6->SDCR[0]; 
-  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-  /* Configure and enable Bank1_SRAM2 */
-  FMC_Bank1->BTCR[2]  = 0x00001011;
-  FMC_Bank1->BTCR[3]  = 0x00000201;
-  FMC_Bank1E->BWTR[2] = 0x0fffffff;
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
-#if defined(STM32F469xx) || defined(STM32F479xx)
-  /* Configure and enable Bank1_SRAM2 */
-  FMC_Bank1->BTCR[2]  = 0x00001091;
-  FMC_Bank1->BTCR[3]  = 0x00110212;
-  FMC_Bank1E->BWTR[2] = 0x0fffffff;
-#endif /* STM32F469xx || STM32F479xx */
-
-  (void)(tmp); 
-}
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
-#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
-/**
-  * @brief  Setup the external memory controller.
-  *         Called in startup_stm32f4xx.s before jump to main.
-  *         This function configures the external memories (SRAM/SDRAM)
-  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
-  * @param  None
-  * @retval None
-  */
-void SystemInit_ExtMemCtl(void)
-{
-  __IO uint32_t tmp = 0x00;
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
- || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
-#if defined (DATA_IN_ExtSDRAM)
-  register uint32_t tmpreg = 0, timeout = 0xFFFF;
-  register __IO uint32_t index;
-
-#if defined(STM32F446xx)
-  /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
-      clock */
-  RCC->AHB1ENR |= 0x0000007D;
-#else
-  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface 
-      clock */
-  RCC->AHB1ENR |= 0x000001F8;
-#endif /* STM32F446xx */  
-  /* Delay after an RCC peripheral clock enabling */
-  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
-  
-#if defined(STM32F446xx)
-  /* Connect PAx pins to FMC Alternate function */
-  GPIOA->AFR[0]  |= 0xC0000000;
-  GPIOA->AFR[1]  |= 0x00000000;
-  /* Configure PDx pins in Alternate function mode */
-  GPIOA->MODER   |= 0x00008000;
-  /* Configure PDx pins speed to 50 MHz */
-  GPIOA->OSPEEDR |= 0x00008000;
-  /* Configure PDx pins Output type to push-pull */
-  GPIOA->OTYPER  |= 0x00000000;
-  /* No pull-up, pull-down for PDx pins */
-  GPIOA->PUPDR   |= 0x00000000;
-
-  /* Connect PCx pins to FMC Alternate function */
-  GPIOC->AFR[0]  |= 0x00CC0000;
-  GPIOC->AFR[1]  |= 0x00000000;
-  /* Configure PDx pins in Alternate function mode */
-  GPIOC->MODER   |= 0x00000A00;
-  /* Configure PDx pins speed to 50 MHz */
-  GPIOC->OSPEEDR |= 0x00000A00;
-  /* Configure PDx pins Output type to push-pull */
-  GPIOC->OTYPER  |= 0x00000000;
-  /* No pull-up, pull-down for PDx pins */
-  GPIOC->PUPDR   |= 0x00000000;
-#endif /* STM32F446xx */
-
-  /* Connect PDx pins to FMC Alternate function */
-  GPIOD->AFR[0]  = 0x000000CC;
-  GPIOD->AFR[1]  = 0xCC000CCC;
-  /* Configure PDx pins in Alternate function mode */  
-  GPIOD->MODER   = 0xA02A000A;
-  /* Configure PDx pins speed to 50 MHz */  
-  GPIOD->OSPEEDR = 0xA02A000A;
-  /* Configure PDx pins Output type to push-pull */  
-  GPIOD->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PDx pins */ 
-  GPIOD->PUPDR   = 0x00000000;
-
-  /* Connect PEx pins to FMC Alternate function */
-  GPIOE->AFR[0]  = 0xC00000CC;
-  GPIOE->AFR[1]  = 0xCCCCCCCC;
-  /* Configure PEx pins in Alternate function mode */ 
-  GPIOE->MODER   = 0xAAAA800A;
-  /* Configure PEx pins speed to 50 MHz */ 
-  GPIOE->OSPEEDR = 0xAAAA800A;
-  /* Configure PEx pins Output type to push-pull */  
-  GPIOE->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PEx pins */ 
-  GPIOE->PUPDR   = 0x00000000;
-
-  /* Connect PFx pins to FMC Alternate function */
-  GPIOF->AFR[0]  = 0xCCCCCCCC;
-  GPIOF->AFR[1]  = 0xCCCCCCCC;
-  /* Configure PFx pins in Alternate function mode */   
-  GPIOF->MODER   = 0xAA800AAA;
-  /* Configure PFx pins speed to 50 MHz */ 
-  GPIOF->OSPEEDR = 0xAA800AAA;
-  /* Configure PFx pins Output type to push-pull */  
-  GPIOF->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PFx pins */ 
-  GPIOF->PUPDR   = 0x00000000;
-
-  /* Connect PGx pins to FMC Alternate function */
-  GPIOG->AFR[0]  = 0xCCCCCCCC;
-  GPIOG->AFR[1]  = 0xCCCCCCCC;
-  /* Configure PGx pins in Alternate function mode */ 
-  GPIOG->MODER   = 0xAAAAAAAA;
-  /* Configure PGx pins speed to 50 MHz */ 
-  GPIOG->OSPEEDR = 0xAAAAAAAA;
-  /* Configure PGx pins Output type to push-pull */  
-  GPIOG->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PGx pins */ 
-  GPIOG->PUPDR   = 0x00000000;
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
- || defined(STM32F469xx) || defined(STM32F479xx)  
-  /* Connect PHx pins to FMC Alternate function */
-  GPIOH->AFR[0]  = 0x00C0CC00;
-  GPIOH->AFR[1]  = 0xCCCCCCCC;
-  /* Configure PHx pins in Alternate function mode */ 
-  GPIOH->MODER   = 0xAAAA08A0;
-  /* Configure PHx pins speed to 50 MHz */ 
-  GPIOH->OSPEEDR = 0xAAAA08A0;
-  /* Configure PHx pins Output type to push-pull */  
-  GPIOH->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PHx pins */ 
-  GPIOH->PUPDR   = 0x00000000;
-  
-  /* Connect PIx pins to FMC Alternate function */
-  GPIOI->AFR[0]  = 0xCCCCCCCC;
-  GPIOI->AFR[1]  = 0x00000CC0;
-  /* Configure PIx pins in Alternate function mode */ 
-  GPIOI->MODER   = 0x0028AAAA;
-  /* Configure PIx pins speed to 50 MHz */ 
-  GPIOI->OSPEEDR = 0x0028AAAA;
-  /* Configure PIx pins Output type to push-pull */  
-  GPIOI->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PIx pins */ 
-  GPIOI->PUPDR   = 0x00000000;
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
-  
-/*-- FMC Configuration -------------------------------------------------------*/
-  /* Enable the FMC interface clock */
-  RCC->AHB3ENR |= 0x00000001;
-  /* Delay after an RCC peripheral clock enabling */
-  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
-
-  /* Configure and enable SDRAM bank1 */
-#if defined(STM32F446xx)
-  FMC_Bank5_6->SDCR[0] = 0x00001954;
-#else  
-  FMC_Bank5_6->SDCR[0] = 0x000019E4;
-#endif /* STM32F446xx */
-  FMC_Bank5_6->SDTR[0] = 0x01115351;      
-  
-  /* SDRAM initialization sequence */
-  /* Clock enable command */
-  FMC_Bank5_6->SDCMR = 0x00000011; 
-  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  while((tmpreg != 0) && (timeout-- > 0))
-  {
-    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  }
-
-  /* Delay */
-  for (index = 0; index<1000; index++);
-  
-  /* PALL command */
-  FMC_Bank5_6->SDCMR = 0x00000012;           
-  timeout = 0xFFFF;
-  while((tmpreg != 0) && (timeout-- > 0))
-  {
-    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  }
-  
-  /* Auto refresh command */
-#if defined(STM32F446xx)
-  FMC_Bank5_6->SDCMR = 0x000000F3;
-#else  
-  FMC_Bank5_6->SDCMR = 0x00000073;
-#endif /* STM32F446xx */
-  timeout = 0xFFFF;
-  while((tmpreg != 0) && (timeout-- > 0))
-  {
-    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  }
- 
-  /* MRD register program */
-#if defined(STM32F446xx)
-  FMC_Bank5_6->SDCMR = 0x00044014;
-#else  
-  FMC_Bank5_6->SDCMR = 0x00046014;
-#endif /* STM32F446xx */
-  timeout = 0xFFFF;
-  while((tmpreg != 0) && (timeout-- > 0))
-  {
-    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  } 
-  
-  /* Set refresh count */
-  tmpreg = FMC_Bank5_6->SDRTR;
-#if defined(STM32F446xx)
-  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
-#else    
-  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
-#endif /* STM32F446xx */
-  
-  /* Disable write protection */
-  tmpreg = FMC_Bank5_6->SDCR[0]; 
-  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
-#endif /* DATA_IN_ExtSDRAM */
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
- || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
- || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
-
-#if defined(DATA_IN_ExtSRAM)
-/*-- GPIOs Configuration -----------------------------------------------------*/
-   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
-  RCC->AHB1ENR   |= 0x00000078;
-  /* Delay after an RCC peripheral clock enabling */
-  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
-  
-  /* Connect PDx pins to FMC Alternate function */
-  GPIOD->AFR[0]  = 0x00CCC0CC;
-  GPIOD->AFR[1]  = 0xCCCCCCCC;
-  /* Configure PDx pins in Alternate function mode */  
-  GPIOD->MODER   = 0xAAAA0A8A;
-  /* Configure PDx pins speed to 100 MHz */  
-  GPIOD->OSPEEDR = 0xFFFF0FCF;
-  /* Configure PDx pins Output type to push-pull */  
-  GPIOD->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PDx pins */ 
-  GPIOD->PUPDR   = 0x00000000;
-
-  /* Connect PEx pins to FMC Alternate function */
-  GPIOE->AFR[0]  = 0xC00CC0CC;
-  GPIOE->AFR[1]  = 0xCCCCCCCC;
-  /* Configure PEx pins in Alternate function mode */ 
-  GPIOE->MODER   = 0xAAAA828A;
-  /* Configure PEx pins speed to 100 MHz */ 
-  GPIOE->OSPEEDR = 0xFFFFC3CF;
-  /* Configure PEx pins Output type to push-pull */  
-  GPIOE->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PEx pins */ 
-  GPIOE->PUPDR   = 0x00000000;
-
-  /* Connect PFx pins to FMC Alternate function */
-  GPIOF->AFR[0]  = 0x00CCCCCC;
-  GPIOF->AFR[1]  = 0xCCCC0000;
-  /* Configure PFx pins in Alternate function mode */   
-  GPIOF->MODER   = 0xAA000AAA;
-  /* Configure PFx pins speed to 100 MHz */ 
-  GPIOF->OSPEEDR = 0xFF000FFF;
-  /* Configure PFx pins Output type to push-pull */  
-  GPIOF->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PFx pins */ 
-  GPIOF->PUPDR   = 0x00000000;
-
-  /* Connect PGx pins to FMC Alternate function */
-  GPIOG->AFR[0]  = 0x00CCCCCC;
-  GPIOG->AFR[1]  = 0x000000C0;
-  /* Configure PGx pins in Alternate function mode */ 
-  GPIOG->MODER   = 0x00085AAA;
-  /* Configure PGx pins speed to 100 MHz */ 
-  GPIOG->OSPEEDR = 0x000CAFFF;
-  /* Configure PGx pins Output type to push-pull */  
-  GPIOG->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PGx pins */ 
-  GPIOG->PUPDR   = 0x00000000;
-  
-/*-- FMC/FSMC Configuration --------------------------------------------------*/
-  /* Enable the FMC/FSMC interface clock */
-  RCC->AHB3ENR         |= 0x00000001;
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-  /* Delay after an RCC peripheral clock enabling */
-  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
-  /* Configure and enable Bank1_SRAM2 */
-  FMC_Bank1->BTCR[2]  = 0x00001011;
-  FMC_Bank1->BTCR[3]  = 0x00000201;
-  FMC_Bank1E->BWTR[2] = 0x0fffffff;
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
-#if defined(STM32F469xx) || defined(STM32F479xx)
-  /* Delay after an RCC peripheral clock enabling */
-  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
-  /* Configure and enable Bank1_SRAM2 */
-  FMC_Bank1->BTCR[2]  = 0x00001091;
-  FMC_Bank1->BTCR[3]  = 0x00110212;
-  FMC_Bank1E->BWTR[2] = 0x0fffffff;
-#endif /* STM32F469xx || STM32F479xx */
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
-   || defined(STM32F412Zx) || defined(STM32F412Vx)
-  /* Delay after an RCC peripheral clock enabling */
-  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
-  /* Configure and enable Bank1_SRAM2 */
-  FSMC_Bank1->BTCR[2]  = 0x00001011;
-  FSMC_Bank1->BTCR[3]  = 0x00000201;
-  FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
-
-#endif /* DATA_IN_ExtSRAM */
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
-          STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx  */ 
-  (void)(tmp); 
-}
-#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+  * @file    system_stm32f4xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from 
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f4xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f4xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F4xx_System_Private_Includes
+  * @{
+  */
+
+
+#include "stm32f4xx.h"
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
+          STM32F412Zx || STM32F412Vx */
+ 
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+          STM32F479xx */
+
+/* Note: Following vector table addresses must be defined in line with linker
+         configuration. */
+/*!< Uncomment the following line if you need to relocate the vector table
+     anywhere in Flash or Sram, else the vector table is kept at the automatic
+     remap of boot address selected */
+/* #define USER_VECT_TAB_ADDRESS */
+
+#if defined(USER_VECT_TAB_ADDRESS)
+/*!< Uncomment the following line if you need to relocate your vector Table
+     in Sram else user remap will be done in Flash. */
+/* #define VECT_TAB_SRAM */
+#if defined(VECT_TAB_SRAM)
+#define VECT_TAB_BASE_ADDRESS   SRAM_BASE       /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
+                                                     This value must be a multiple of 0x200. */
+#else
+#define VECT_TAB_BASE_ADDRESS   FLASH_BASE      /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
+                                                     This value must be a multiple of 0x200. */
+#endif /* VECT_TAB_SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+uint32_t SystemCoreClock = 16000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8]  = {0, 0, 0, 0, 1, 2, 3, 4};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting, vector table location and External memory 
+  *         configuration.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  SystemInit_ExtMemCtl(); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+  /* Configure the Vector Table location -------------------------------------*/
+#if defined(USER_VECT_TAB_ADDRESS)
+  SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+  *              depends on the application requirements), user has to ensure that HSE_VALUE
+  *              is same as the real frequency of the crystal used. Otherwise, this function
+  *              may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *     
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate(void)
+{
+  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+  
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock source */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock source */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock source */
+
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+         SYSCLK = PLL_VCO / PLL_P
+         */    
+      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      
+      if (pllsource != 0)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+
+      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+      SystemCoreClock = pllvco/pllp;
+      break;
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK frequency --------------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK frequency */
+  SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register __IO uint32_t index;
+
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
+  RCC->AHB1ENR |= 0x000001F8;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+  
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+  
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x00000000;
+  
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00000000;
+  
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+  FMC_Bank5_6->SDTR[0] = 0x01115351;      
+  
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+  FMC_Bank5_6->SDCMR = 0x00000073;
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+  FMC_Bank5_6->SDCMR = 0x00046014;
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
+#if defined(STM32F469xx) || defined(STM32F479xx)
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001091;
+  FMC_Bank1->BTCR[3]  = 0x00110212;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+
+  (void)(tmp); 
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#if defined (DATA_IN_ExtSDRAM)
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register __IO uint32_t index;
+
+#if defined(STM32F446xx)
+  /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+      clock */
+  RCC->AHB1ENR |= 0x0000007D;
+#else
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface 
+      clock */
+  RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */  
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+  
+#if defined(STM32F446xx)
+  /* Connect PAx pins to FMC Alternate function */
+  GPIOA->AFR[0]  |= 0xC0000000;
+  GPIOA->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOA->MODER   |= 0x00008000;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOA->OSPEEDR |= 0x00008000;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOA->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOA->PUPDR   |= 0x00000000;
+
+  /* Connect PCx pins to FMC Alternate function */
+  GPIOC->AFR[0]  |= 0x00CC0000;
+  GPIOC->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOC->MODER   |= 0x00000A00;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOC->OSPEEDR |= 0x00000A00;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOC->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOC->PUPDR   |= 0x00000000;
+#endif /* STM32F446xx */
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x000000CC;
+  GPIOD->AFR[1]  = 0xCC000CCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xA02A000A;
+  /* Configure PDx pins speed to 50 MHz */  
+  GPIOD->OSPEEDR = 0xA02A000A;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00000CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA800A;
+  /* Configure PEx pins speed to 50 MHz */ 
+  GPIOE->OSPEEDR = 0xAAAA800A;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)  
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x00000000;
+  
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+  
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else  
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+  FMC_Bank5_6->SDTR[0] = 0x01115351;      
+  
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x000000F3;
+#else  
+  FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x00044014;
+#else  
+  FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
+#else    
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+#endif /* STM32F446xx */
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+  RCC->AHB1ENR   |= 0x00000078;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCC0000;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA000AAA;
+  /* Configure PFx pins speed to 100 MHz */ 
+  GPIOF->OSPEEDR = 0xFF000FFF;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0x000000C0;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0x00085AAA;
+  /* Configure PGx pins speed to 100 MHz */ 
+  GPIOG->OSPEEDR = 0x000CAFFF;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+  
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+  /* Enable the FMC/FSMC interface clock */
+  RCC->AHB3ENR         |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
+#if defined(STM32F469xx) || defined(STM32F479xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001091;
+  FMC_Bank1->BTCR[3]  = 0x00110212;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
+   || defined(STM32F412Zx) || defined(STM32F412Vx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FSMC_Bank1->BTCR[2]  = 0x00001011;
+  FSMC_Bank1->BTCR[3]  = 0x00000201;
+  FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+          STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx  */ 
+  (void)(tmp); 
+}
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

Soft/STM32/Controle/Core/Src/tim.c

@@ -1,450 +1,580 @@
-/**
-  ******************************************************************************
-  * @file    tim.c
-  * @brief   This file provides code for the configuration
-  *          of the TIM instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "tim.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-TIM_HandleTypeDef htim1;
-TIM_HandleTypeDef htim2;
-TIM_HandleTypeDef htim3;
-TIM_HandleTypeDef htim4;
-TIM_HandleTypeDef htim9;
-
-/* TIM1 init function */
-void MX_TIM1_Init(void)
-{
-  TIM_SlaveConfigTypeDef sSlaveConfig = {0};
-  TIM_MasterConfigTypeDef sMasterConfig = {0};
-
-  htim1.Instance = TIM1;
-  htim1.Init.Prescaler = 0;
-  htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
-  htim1.Init.Period = 65535;
-  htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-  htim1.Init.RepetitionCounter = 0;
-  htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-  if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sSlaveConfig.SlaveMode = TIM_SLAVEMODE_EXTERNAL1;
-  sSlaveConfig.InputTrigger = TIM_TS_ITR0;
-  if (HAL_TIM_SlaveConfigSynchro(&htim1, &sSlaveConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
-  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
-  if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-/* TIM2 init function */
-void MX_TIM2_Init(void)
-{
-  TIM_MasterConfigTypeDef sMasterConfig = {0};
-  TIM_OC_InitTypeDef sConfigOC = {0};
-
-  htim2.Instance = TIM2;
-  htim2.Init.Prescaler = 8-1;
-  htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
-  htim2.Init.Period = 31250-1;
-  htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-  htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-  if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
-  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
-  if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sConfigOC.OCMode = TIM_OCMODE_PWM1;
-  sConfigOC.Pulse = 0;
-  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
-  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
-  if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  HAL_TIM_MspPostInit(&htim2);
-
-}
-/* TIM3 init function */
-void MX_TIM3_Init(void)
-{
-  TIM_MasterConfigTypeDef sMasterConfig = {0};
-  TIM_OC_InitTypeDef sConfigOC = {0};
-
-  htim3.Instance = TIM3;
-  htim3.Init.Prescaler = 8-1;
-  htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
-  htim3.Init.Period = 31250-1;
-  htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-  htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-  if (HAL_TIM_PWM_Init(&htim3) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
-  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
-  if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sConfigOC.OCMode = TIM_OCMODE_PWM1;
-  sConfigOC.Pulse = 0;
-  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
-  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
-  if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  HAL_TIM_MspPostInit(&htim3);
-
-}
-/* TIM4 init function */
-void MX_TIM4_Init(void)
-{
-  TIM_MasterConfigTypeDef sMasterConfig = {0};
-  TIM_OC_InitTypeDef sConfigOC = {0};
-
-  htim4.Instance = TIM4;
-  htim4.Init.Prescaler = 8-1;
-  htim4.Init.CounterMode = TIM_COUNTERMODE_UP;
-  htim4.Init.Period = 31250-1;
-  htim4.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-  htim4.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-  if (HAL_TIM_PWM_Init(&htim4) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
-  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
-  if (HAL_TIMEx_MasterConfigSynchronization(&htim4, &sMasterConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sConfigOC.OCMode = TIM_OCMODE_PWM1;
-  sConfigOC.Pulse = 0;
-  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
-  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
-  if (HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  HAL_TIM_MspPostInit(&htim4);
-
-}
-/* TIM9 init function */
-void MX_TIM9_Init(void)
-{
-  TIM_SlaveConfigTypeDef sSlaveConfig = {0};
-  TIM_OC_InitTypeDef sConfigOC = {0};
-
-  htim9.Instance = TIM9;
-  htim9.Init.Prescaler = 0;
-  htim9.Init.CounterMode = TIM_COUNTERMODE_UP;
-  htim9.Init.Period = 65535;
-  htim9.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-  htim9.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-  if (HAL_TIM_Base_Init(&htim9) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_TIM_PWM_Init(&htim9) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sSlaveConfig.SlaveMode = TIM_SLAVEMODE_DISABLE;
-  sSlaveConfig.InputTrigger = TIM_TS_ITR0;
-  if (HAL_TIM_SlaveConfigSynchro(&htim9, &sSlaveConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sConfigOC.OCMode = TIM_OCMODE_PWM1;
-  sConfigOC.Pulse = 0;
-  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
-  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
-  if (HAL_TIM_PWM_ConfigChannel(&htim9, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
-{
-
-  if(tim_baseHandle->Instance==TIM1)
-  {
-  /* USER CODE BEGIN TIM1_MspInit 0 */
-
-  /* USER CODE END TIM1_MspInit 0 */
-    /* TIM1 clock enable */
-    __HAL_RCC_TIM1_CLK_ENABLE();
-  /* USER CODE BEGIN TIM1_MspInit 1 */
-
-  /* USER CODE END TIM1_MspInit 1 */
-  }
-  else if(tim_baseHandle->Instance==TIM9)
-  {
-  /* USER CODE BEGIN TIM9_MspInit 0 */
-
-  /* USER CODE END TIM9_MspInit 0 */
-    /* TIM9 clock enable */
-    __HAL_RCC_TIM9_CLK_ENABLE();
-  /* USER CODE BEGIN TIM9_MspInit 1 */
-
-  /* USER CODE END TIM9_MspInit 1 */
-  }
-}
-
-void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef* tim_pwmHandle)
-{
-
-  if(tim_pwmHandle->Instance==TIM2)
-  {
-  /* USER CODE BEGIN TIM2_MspInit 0 */
-
-  /* USER CODE END TIM2_MspInit 0 */
-    /* TIM2 clock enable */
-    __HAL_RCC_TIM2_CLK_ENABLE();
-  /* USER CODE BEGIN TIM2_MspInit 1 */
-
-  /* USER CODE END TIM2_MspInit 1 */
-  }
-  else if(tim_pwmHandle->Instance==TIM3)
-  {
-  /* USER CODE BEGIN TIM3_MspInit 0 */
-
-  /* USER CODE END TIM3_MspInit 0 */
-    /* TIM3 clock enable */
-    __HAL_RCC_TIM3_CLK_ENABLE();
-  /* USER CODE BEGIN TIM3_MspInit 1 */
-
-  /* USER CODE END TIM3_MspInit 1 */
-  }
-  else if(tim_pwmHandle->Instance==TIM4)
-  {
-  /* USER CODE BEGIN TIM4_MspInit 0 */
-
-  /* USER CODE END TIM4_MspInit 0 */
-    /* TIM4 clock enable */
-    __HAL_RCC_TIM4_CLK_ENABLE();
-  /* USER CODE BEGIN TIM4_MspInit 1 */
-
-  /* USER CODE END TIM4_MspInit 1 */
-  }
-}
-void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(timHandle->Instance==TIM2)
-  {
-  /* USER CODE BEGIN TIM2_MspPostInit 0 */
-
-  /* USER CODE END TIM2_MspPostInit 0 */
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**TIM2 GPIO Configuration
-    PA1     ------> TIM2_CH2
-    PA2     ------> TIM2_CH3
-    PA3     ------> TIM2_CH4
-    */
-    GPIO_InitStruct.Pin = CMD_Pin|S1_Pin|S2_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;
-    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN TIM2_MspPostInit 1 */
-
-  /* USER CODE END TIM2_MspPostInit 1 */
-  }
-  else if(timHandle->Instance==TIM3)
-  {
-  /* USER CODE BEGIN TIM3_MspPostInit 0 */
-
-  /* USER CODE END TIM3_MspPostInit 0 */
-
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**TIM3 GPIO Configuration
-    PA6     ------> TIM3_CH1
-    PA7     ------> TIM3_CH2
-    PB0     ------> TIM3_CH3
-    PB1     ------> TIM3_CH4
-    */
-    GPIO_InitStruct.Pin = S3_Pin|S4_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
-    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-    GPIO_InitStruct.Pin = S5_Pin|S6_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
-    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN TIM3_MspPostInit 1 */
-
-  /* USER CODE END TIM3_MspPostInit 1 */
-  }
-  else if(timHandle->Instance==TIM4)
-  {
-  /* USER CODE BEGIN TIM4_MspPostInit 0 */
-
-  /* USER CODE END TIM4_MspPostInit 0 */
-
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**TIM4 GPIO Configuration
-    PB6     ------> TIM4_CH1
-    PB7     ------> TIM4_CH2
-    PB8     ------> TIM4_CH3
-    PB9     ------> TIM4_CH4
-    */
-    GPIO_InitStruct.Pin = S7_Pin|S8_Pin|S9_Pin|S10_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF2_TIM4;
-    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN TIM4_MspPostInit 1 */
-
-  /* USER CODE END TIM4_MspPostInit 1 */
-  }
-
-}
-
-void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
-{
-
-  if(tim_baseHandle->Instance==TIM1)
-  {
-  /* USER CODE BEGIN TIM1_MspDeInit 0 */
-
-  /* USER CODE END TIM1_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_TIM1_CLK_DISABLE();
-  /* USER CODE BEGIN TIM1_MspDeInit 1 */
-
-  /* USER CODE END TIM1_MspDeInit 1 */
-  }
-  else if(tim_baseHandle->Instance==TIM9)
-  {
-  /* USER CODE BEGIN TIM9_MspDeInit 0 */
-
-  /* USER CODE END TIM9_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_TIM9_CLK_DISABLE();
-  /* USER CODE BEGIN TIM9_MspDeInit 1 */
-
-  /* USER CODE END TIM9_MspDeInit 1 */
-  }
-}
-
-void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef* tim_pwmHandle)
-{
-
-  if(tim_pwmHandle->Instance==TIM2)
-  {
-  /* USER CODE BEGIN TIM2_MspDeInit 0 */
-
-  /* USER CODE END TIM2_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_TIM2_CLK_DISABLE();
-  /* USER CODE BEGIN TIM2_MspDeInit 1 */
-
-  /* USER CODE END TIM2_MspDeInit 1 */
-  }
-  else if(tim_pwmHandle->Instance==TIM3)
-  {
-  /* USER CODE BEGIN TIM3_MspDeInit 0 */
-
-  /* USER CODE END TIM3_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_TIM3_CLK_DISABLE();
-  /* USER CODE BEGIN TIM3_MspDeInit 1 */
-
-  /* USER CODE END TIM3_MspDeInit 1 */
-  }
-  else if(tim_pwmHandle->Instance==TIM4)
-  {
-  /* USER CODE BEGIN TIM4_MspDeInit 0 */
-
-  /* USER CODE END TIM4_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_TIM4_CLK_DISABLE();
-  /* USER CODE BEGIN TIM4_MspDeInit 1 */
-
-  /* USER CODE END TIM4_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    tim.c
+  * @brief   This file provides code for the configuration
+  *          of the TIM instances.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "tim.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+TIM_HandleTypeDef htim1;
+TIM_HandleTypeDef htim2;
+TIM_HandleTypeDef htim3;
+TIM_HandleTypeDef htim4;
+TIM_HandleTypeDef htim9;
+TIM_HandleTypeDef htim10;
+
+/* TIM1 init function */
+void MX_TIM1_Init(void)
+{
+
+  /* USER CODE BEGIN TIM1_Init 0 */
+
+  /* USER CODE END TIM1_Init 0 */
+
+  TIM_SlaveConfigTypeDef sSlaveConfig = {0};
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+
+  /* USER CODE BEGIN TIM1_Init 1 */
+
+  /* USER CODE END TIM1_Init 1 */
+  htim1.Instance = TIM1;
+  htim1.Init.Prescaler = 0;
+  htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim1.Init.Period = 65535;
+  htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim1.Init.RepetitionCounter = 0;
+  htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sSlaveConfig.SlaveMode = TIM_SLAVEMODE_EXTERNAL1;
+  sSlaveConfig.InputTrigger = TIM_TS_ITR0;
+  if (HAL_TIM_SlaveConfigSynchro(&htim1, &sSlaveConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM1_Init 2 */
+
+  /* USER CODE END TIM1_Init 2 */
+
+}
+/* TIM2 init function */
+void MX_TIM2_Init(void)
+{
+
+  /* USER CODE BEGIN TIM2_Init 0 */
+
+  /* USER CODE END TIM2_Init 0 */
+
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+  TIM_OC_InitTypeDef sConfigOC = {0};
+
+  /* USER CODE BEGIN TIM2_Init 1 */
+
+  /* USER CODE END TIM2_Init 1 */
+  htim2.Instance = TIM2;
+  htim2.Init.Prescaler = 8-1;
+  htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim2.Init.Period = 31250-1;
+  htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.Pulse = 0;
+  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+  if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM2_Init 2 */
+
+  /* USER CODE END TIM2_Init 2 */
+  HAL_TIM_MspPostInit(&htim2);
+
+}
+/* TIM3 init function */
+void MX_TIM3_Init(void)
+{
+
+  /* USER CODE BEGIN TIM3_Init 0 */
+
+  /* USER CODE END TIM3_Init 0 */
+
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+  TIM_OC_InitTypeDef sConfigOC = {0};
+
+  /* USER CODE BEGIN TIM3_Init 1 */
+
+  /* USER CODE END TIM3_Init 1 */
+  htim3.Instance = TIM3;
+  htim3.Init.Prescaler = 8-1;
+  htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim3.Init.Period = 31250-1;
+  htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_PWM_Init(&htim3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.Pulse = 0;
+  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+  if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM3_Init 2 */
+
+  /* USER CODE END TIM3_Init 2 */
+  HAL_TIM_MspPostInit(&htim3);
+
+}
+/* TIM4 init function */
+void MX_TIM4_Init(void)
+{
+
+  /* USER CODE BEGIN TIM4_Init 0 */
+
+  /* USER CODE END TIM4_Init 0 */
+
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+  TIM_OC_InitTypeDef sConfigOC = {0};
+
+  /* USER CODE BEGIN TIM4_Init 1 */
+
+  /* USER CODE END TIM4_Init 1 */
+  htim4.Instance = TIM4;
+  htim4.Init.Prescaler = 8-1;
+  htim4.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim4.Init.Period = 31250-1;
+  htim4.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim4.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_PWM_Init(&htim4) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim4, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.Pulse = 0;
+  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+  if (HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM4_Init 2 */
+
+  /* USER CODE END TIM4_Init 2 */
+  HAL_TIM_MspPostInit(&htim4);
+
+}
+/* TIM9 init function */
+void MX_TIM9_Init(void)
+{
+
+  /* USER CODE BEGIN TIM9_Init 0 */
+
+  /* USER CODE END TIM9_Init 0 */
+
+  TIM_SlaveConfigTypeDef sSlaveConfig = {0};
+  TIM_OC_InitTypeDef sConfigOC = {0};
+
+  /* USER CODE BEGIN TIM9_Init 1 */
+
+  /* USER CODE END TIM9_Init 1 */
+  htim9.Instance = TIM9;
+  htim9.Init.Prescaler = 0;
+  htim9.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim9.Init.Period = 65535;
+  htim9.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim9.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim9) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_Init(&htim9) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sSlaveConfig.SlaveMode = TIM_SLAVEMODE_DISABLE;
+  sSlaveConfig.InputTrigger = TIM_TS_ITR0;
+  if (HAL_TIM_SlaveConfigSynchro(&htim9, &sSlaveConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.Pulse = 0;
+  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+  if (HAL_TIM_PWM_ConfigChannel(&htim9, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM9_Init 2 */
+
+  /* USER CODE END TIM9_Init 2 */
+
+}
+/* TIM10 init function */
+void MX_TIM10_Init(void)
+{
+
+  /* USER CODE BEGIN TIM10_Init 0 */
+
+  /* USER CODE END TIM10_Init 0 */
+
+  /* USER CODE BEGIN TIM10_Init 1 */
+
+  /* USER CODE END TIM10_Init 1 */
+  htim10.Instance = TIM10;
+  htim10.Init.Prescaler = 20000;
+  htim10.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim10.Init.Period = 63000;
+  htim10.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim10.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;
+  if (HAL_TIM_Base_Init(&htim10) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM10_Init 2 */
+
+  /* USER CODE END TIM10_Init 2 */
+
+}
+
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
+{
+
+  if(tim_baseHandle->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspInit 0 */
+
+  /* USER CODE END TIM1_MspInit 0 */
+    /* TIM1 clock enable */
+    __HAL_RCC_TIM1_CLK_ENABLE();
+
+    /* TIM1 interrupt Init */
+    HAL_NVIC_SetPriority(TIM1_UP_TIM10_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(TIM1_UP_TIM10_IRQn);
+  /* USER CODE BEGIN TIM1_MspInit 1 */
+
+  /* USER CODE END TIM1_MspInit 1 */
+  }
+  else if(tim_baseHandle->Instance==TIM9)
+  {
+  /* USER CODE BEGIN TIM9_MspInit 0 */
+
+  /* USER CODE END TIM9_MspInit 0 */
+    /* TIM9 clock enable */
+    __HAL_RCC_TIM9_CLK_ENABLE();
+  /* USER CODE BEGIN TIM9_MspInit 1 */
+
+  /* USER CODE END TIM9_MspInit 1 */
+  }
+  else if(tim_baseHandle->Instance==TIM10)
+  {
+  /* USER CODE BEGIN TIM10_MspInit 0 */
+
+  /* USER CODE END TIM10_MspInit 0 */
+    /* TIM10 clock enable */
+    __HAL_RCC_TIM10_CLK_ENABLE();
+
+    /* TIM10 interrupt Init */
+    HAL_NVIC_SetPriority(TIM1_UP_TIM10_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(TIM1_UP_TIM10_IRQn);
+  /* USER CODE BEGIN TIM10_MspInit 1 */
+
+  /* USER CODE END TIM10_MspInit 1 */
+  }
+}
+
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef* tim_pwmHandle)
+{
+
+  if(tim_pwmHandle->Instance==TIM2)
+  {
+  /* USER CODE BEGIN TIM2_MspInit 0 */
+
+  /* USER CODE END TIM2_MspInit 0 */
+    /* TIM2 clock enable */
+    __HAL_RCC_TIM2_CLK_ENABLE();
+  /* USER CODE BEGIN TIM2_MspInit 1 */
+
+  /* USER CODE END TIM2_MspInit 1 */
+  }
+  else if(tim_pwmHandle->Instance==TIM3)
+  {
+  /* USER CODE BEGIN TIM3_MspInit 0 */
+
+  /* USER CODE END TIM3_MspInit 0 */
+    /* TIM3 clock enable */
+    __HAL_RCC_TIM3_CLK_ENABLE();
+  /* USER CODE BEGIN TIM3_MspInit 1 */
+
+  /* USER CODE END TIM3_MspInit 1 */
+  }
+  else if(tim_pwmHandle->Instance==TIM4)
+  {
+  /* USER CODE BEGIN TIM4_MspInit 0 */
+
+  /* USER CODE END TIM4_MspInit 0 */
+    /* TIM4 clock enable */
+    __HAL_RCC_TIM4_CLK_ENABLE();
+  /* USER CODE BEGIN TIM4_MspInit 1 */
+
+  /* USER CODE END TIM4_MspInit 1 */
+  }
+}
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(timHandle->Instance==TIM2)
+  {
+  /* USER CODE BEGIN TIM2_MspPostInit 0 */
+
+  /* USER CODE END TIM2_MspPostInit 0 */
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**TIM2 GPIO Configuration
+    PA1     ------> TIM2_CH2
+    PA2     ------> TIM2_CH3
+    PA3     ------> TIM2_CH4
+    */
+    GPIO_InitStruct.Pin = CMD_Pin|S1_Pin|S2_Pin;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN TIM2_MspPostInit 1 */
+
+  /* USER CODE END TIM2_MspPostInit 1 */
+  }
+  else if(timHandle->Instance==TIM3)
+  {
+  /* USER CODE BEGIN TIM3_MspPostInit 0 */
+
+  /* USER CODE END TIM3_MspPostInit 0 */
+
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    /**TIM3 GPIO Configuration
+    PA6     ------> TIM3_CH1
+    PA7     ------> TIM3_CH2
+    PB0     ------> TIM3_CH3
+    PB1     ------> TIM3_CH4
+    */
+    GPIO_InitStruct.Pin = S3_Pin|S4_Pin;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = S5_Pin|S6_Pin;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN TIM3_MspPostInit 1 */
+
+  /* USER CODE END TIM3_MspPostInit 1 */
+  }
+  else if(timHandle->Instance==TIM4)
+  {
+  /* USER CODE BEGIN TIM4_MspPostInit 0 */
+
+  /* USER CODE END TIM4_MspPostInit 0 */
+
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    /**TIM4 GPIO Configuration
+    PB6     ------> TIM4_CH1
+    PB7     ------> TIM4_CH2
+    PB8     ------> TIM4_CH3
+    PB9     ------> TIM4_CH4
+    */
+    GPIO_InitStruct.Pin = S7_Pin|S8_Pin|S9_Pin|S10_Pin;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF2_TIM4;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN TIM4_MspPostInit 1 */
+
+  /* USER CODE END TIM4_MspPostInit 1 */
+  }
+
+}
+
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
+{
+
+  if(tim_baseHandle->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspDeInit 0 */
+
+  /* USER CODE END TIM1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM1_CLK_DISABLE();
+
+    /* TIM1 interrupt Deinit */
+  /* USER CODE BEGIN TIM1:TIM1_UP_TIM10_IRQn disable */
+    /**
+    * Uncomment the line below to disable the "TIM1_UP_TIM10_IRQn" interrupt
+    * Be aware, disabling shared interrupt may affect other IPs
+    */
+    /* HAL_NVIC_DisableIRQ(TIM1_UP_TIM10_IRQn); */
+  /* USER CODE END TIM1:TIM1_UP_TIM10_IRQn disable */
+
+  /* USER CODE BEGIN TIM1_MspDeInit 1 */
+
+  /* USER CODE END TIM1_MspDeInit 1 */
+  }
+  else if(tim_baseHandle->Instance==TIM9)
+  {
+  /* USER CODE BEGIN TIM9_MspDeInit 0 */
+
+  /* USER CODE END TIM9_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM9_CLK_DISABLE();
+  /* USER CODE BEGIN TIM9_MspDeInit 1 */
+
+  /* USER CODE END TIM9_MspDeInit 1 */
+  }
+  else if(tim_baseHandle->Instance==TIM10)
+  {
+  /* USER CODE BEGIN TIM10_MspDeInit 0 */
+
+  /* USER CODE END TIM10_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM10_CLK_DISABLE();
+
+    /* TIM10 interrupt Deinit */
+  /* USER CODE BEGIN TIM10:TIM1_UP_TIM10_IRQn disable */
+    /**
+    * Uncomment the line below to disable the "TIM1_UP_TIM10_IRQn" interrupt
+    * Be aware, disabling shared interrupt may affect other IPs
+    */
+    /* HAL_NVIC_DisableIRQ(TIM1_UP_TIM10_IRQn); */
+  /* USER CODE END TIM10:TIM1_UP_TIM10_IRQn disable */
+
+  /* USER CODE BEGIN TIM10_MspDeInit 1 */
+
+  /* USER CODE END TIM10_MspDeInit 1 */
+  }
+}
+
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef* tim_pwmHandle)
+{
+
+  if(tim_pwmHandle->Instance==TIM2)
+  {
+  /* USER CODE BEGIN TIM2_MspDeInit 0 */
+
+  /* USER CODE END TIM2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM2_CLK_DISABLE();
+  /* USER CODE BEGIN TIM2_MspDeInit 1 */
+
+  /* USER CODE END TIM2_MspDeInit 1 */
+  }
+  else if(tim_pwmHandle->Instance==TIM3)
+  {
+  /* USER CODE BEGIN TIM3_MspDeInit 0 */
+
+  /* USER CODE END TIM3_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM3_CLK_DISABLE();
+  /* USER CODE BEGIN TIM3_MspDeInit 1 */
+
+  /* USER CODE END TIM3_MspDeInit 1 */
+  }
+  else if(tim_pwmHandle->Instance==TIM4)
+  {
+  /* USER CODE BEGIN TIM4_MspDeInit 0 */
+
+  /* USER CODE END TIM4_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM4_CLK_DISABLE();
+  /* USER CODE BEGIN TIM4_MspDeInit 1 */
+
+  /* USER CODE END TIM4_MspDeInit 1 */
+  }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

Soft/STM32/Controle/Core/Src/usart.c

@@ -1,111 +1,119 @@
-/**
-  ******************************************************************************
-  * @file    usart.c
-  * @brief   This file provides code for the configuration
-  *          of the USART instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2022 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usart.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-UART_HandleTypeDef huart6;
-
-/* USART6 init function */
-
-void MX_USART6_UART_Init(void)
-{
-
-  huart6.Instance = USART6;
-  huart6.Init.BaudRate = 115200;
-  huart6.Init.WordLength = UART_WORDLENGTH_8B;
-  huart6.Init.StopBits = UART_STOPBITS_1;
-  huart6.Init.Parity = UART_PARITY_NONE;
-  huart6.Init.Mode = UART_MODE_TX_RX;
-  huart6.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-  huart6.Init.OverSampling = UART_OVERSAMPLING_16;
-  if (HAL_UART_Init(&huart6) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(uartHandle->Instance==USART6)
-  {
-  /* USER CODE BEGIN USART6_MspInit 0 */
-
-  /* USER CODE END USART6_MspInit 0 */
-    /* USART6 clock enable */
-    __HAL_RCC_USART6_CLK_ENABLE();
-
-    __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**USART6 GPIO Configuration
-    PC6     ------> USART6_TX
-    PC7     ------> USART6_RX
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF8_USART6;
-    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
-
-    /* USART6 interrupt Init */
-    HAL_NVIC_SetPriority(USART6_IRQn, 0, 0);
-    HAL_NVIC_EnableIRQ(USART6_IRQn);
-  /* USER CODE BEGIN USART6_MspInit 1 */
-
-  /* USER CODE END USART6_MspInit 1 */
-  }
-}
-
-void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
-{
-
-  if(uartHandle->Instance==USART6)
-  {
-  /* USER CODE BEGIN USART6_MspDeInit 0 */
-
-  /* USER CODE END USART6_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_USART6_CLK_DISABLE();
-
-    /**USART6 GPIO Configuration
-    PC6     ------> USART6_TX
-    PC7     ------> USART6_RX
-    */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_6|GPIO_PIN_7);
-
-    /* USART6 interrupt Deinit */
-    HAL_NVIC_DisableIRQ(USART6_IRQn);
-  /* USER CODE BEGIN USART6_MspDeInit 1 */
-
-  /* USER CODE END USART6_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    usart.c
+  * @brief   This file provides code for the configuration
+  *          of the USART instances.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "usart.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+UART_HandleTypeDef huart6;
+
+/* USART6 init function */
+
+void MX_USART6_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART6_Init 0 */
+
+  /* USER CODE END USART6_Init 0 */
+
+  /* USER CODE BEGIN USART6_Init 1 */
+
+  /* USER CODE END USART6_Init 1 */
+  huart6.Instance = USART6;
+  huart6.Init.BaudRate = 115200;
+  huart6.Init.WordLength = UART_WORDLENGTH_8B;
+  huart6.Init.StopBits = UART_STOPBITS_1;
+  huart6.Init.Parity = UART_PARITY_NONE;
+  huart6.Init.Mode = UART_MODE_TX_RX;
+  huart6.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart6.Init.OverSampling = UART_OVERSAMPLING_16;
+  if (HAL_UART_Init(&huart6) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART6_Init 2 */
+
+  /* USER CODE END USART6_Init 2 */
+
+}
+
+void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(uartHandle->Instance==USART6)
+  {
+  /* USER CODE BEGIN USART6_MspInit 0 */
+
+  /* USER CODE END USART6_MspInit 0 */
+    /* USART6 clock enable */
+    __HAL_RCC_USART6_CLK_ENABLE();
+
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    /**USART6 GPIO Configuration
+    PC6     ------> USART6_TX
+    PC7     ------> USART6_RX
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF8_USART6;
+    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+    /* USART6 interrupt Init */
+    HAL_NVIC_SetPriority(USART6_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(USART6_IRQn);
+  /* USER CODE BEGIN USART6_MspInit 1 */
+
+  /* USER CODE END USART6_MspInit 1 */
+  }
+}
+
+void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
+{
+
+  if(uartHandle->Instance==USART6)
+  {
+  /* USER CODE BEGIN USART6_MspDeInit 0 */
+
+  /* USER CODE END USART6_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USART6_CLK_DISABLE();
+
+    /**USART6 GPIO Configuration
+    PC6     ------> USART6_TX
+    PC7     ------> USART6_RX
+    */
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_6|GPIO_PIN_7);
+
+    /* USART6 interrupt Deinit */
+    HAL_NVIC_DisableIRQ(USART6_IRQn);
+  /* USER CODE BEGIN USART6_MspDeInit 1 */
+
+  /* USER CODE END USART6_MspDeInit 1 */
+  }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

Soft/STM32/Controle/Core/Startup/startup_stm32f401rctx.s

@@ -1,432 +1,431 @@
-/**
-  ******************************************************************************
-  * @file      startup_stm32f401xc.s
-  * @author    MCD Application Team
-  * @brief     STM32F401xCxx Devices vector table for GCC based toolchains. 
-  *            This module performs:
-  *                - Set the initial SP
-  *                - Set the initial PC == Reset_Handler,
-  *                - Set the vector table entries with the exceptions ISR address
-  *                - Branches to main in the C library (which eventually
-  *                  calls main()).
-  *            After Reset the Cortex-M4 processor is in Thread mode,
-  *            priority is Privileged, and the Stack is set to Main.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-    
-  .syntax unified
-  .cpu cortex-m4
-  .fpu softvfp
-  .thumb
-
-.global  g_pfnVectors
-.global  Default_Handler
-
-/* start address for the initialization values of the .data section. 
-defined in linker script */
-.word  _sidata
-/* start address for the .data section. defined in linker script */  
-.word  _sdata
-/* end address for the .data section. defined in linker script */
-.word  _edata
-/* start address for the .bss section. defined in linker script */
-.word  _sbss
-/* end address for the .bss section. defined in linker script */
-.word  _ebss
-/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
-
-/**
- * @brief  This is the code that gets called when the processor first
- *          starts execution following a reset event. Only the absolutely
- *          necessary set is performed, after which the application
- *          supplied main() routine is called. 
- * @param  None
- * @retval : None
-*/
-
-    .section  .text.Reset_Handler
-  .weak  Reset_Handler
-  .type  Reset_Handler, %function
-Reset_Handler:  
-  ldr   sp, =_estack      /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */  
-  movs  r1, #0
-  b  LoopCopyDataInit
-
-CopyDataInit:
-  ldr  r3, =_sidata
-  ldr  r3, [r3, r1]
-  str  r3, [r0, r1]
-  adds  r1, r1, #4
-    
-LoopCopyDataInit:
-  ldr  r0, =_sdata
-  ldr  r3, =_edata
-  adds  r2, r0, r1
-  cmp  r2, r3
-  bcc  CopyDataInit
-  ldr  r2, =_sbss
-  b  LoopFillZerobss
-/* Zero fill the bss segment. */  
-FillZerobss:
-  movs  r3, #0
-  str  r3, [r2], #4
-    
-LoopFillZerobss:
-  ldr  r3, = _ebss
-  cmp  r2, r3
-  bcc  FillZerobss
-
-/* Call the clock system intitialization function.*/
-  bl  SystemInit   
-/* Call static constructors */
-    bl __libc_init_array
-/* Call the application's entry point.*/
-  bl  main
-  bx  lr    
-.size  Reset_Handler, .-Reset_Handler
-
-/**
- * @brief  This is the code that gets called when the processor receives an 
- *         unexpected interrupt.  This simply enters an infinite loop, preserving
- *         the system state for examination by a debugger.
- * @param  None     
- * @retval None       
-*/
-    .section  .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
-  b  Infinite_Loop
-  .size  Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-* 
-*******************************************************************************/
-   .section  .isr_vector,"a",%progbits
-  .type  g_pfnVectors, %object
-  .size  g_pfnVectors, .-g_pfnVectors
-    
-g_pfnVectors:
-  .word  _estack
-  .word  Reset_Handler
-  .word  NMI_Handler
-  .word  HardFault_Handler
-  .word  MemManage_Handler
-  .word  BusFault_Handler
-  .word  UsageFault_Handler
-  .word  0
-  .word  0
-  .word  0
-  .word  0
-  .word  SVC_Handler
-  .word  DebugMon_Handler
-  .word  0
-  .word  PendSV_Handler
-  .word  SysTick_Handler
-  
-  /* External Interrupts */
-  .word     WWDG_IRQHandler                   /* Window WatchDog              */                                        
-  .word     PVD_IRQHandler                    /* PVD through EXTI Line detection */                        
-  .word     TAMP_STAMP_IRQHandler             /* Tamper and TimeStamps through the EXTI line */            
-  .word     RTC_WKUP_IRQHandler               /* RTC Wakeup through the EXTI line */                      
-  .word     FLASH_IRQHandler                  /* FLASH                        */                                          
-  .word     RCC_IRQHandler                    /* RCC                          */                                            
-  .word     EXTI0_IRQHandler                  /* EXTI Line0                   */                        
-  .word     EXTI1_IRQHandler                  /* EXTI Line1                   */                          
-  .word     EXTI2_IRQHandler                  /* EXTI Line2                   */                          
-  .word     EXTI3_IRQHandler                  /* EXTI Line3                   */                          
-  .word     EXTI4_IRQHandler                  /* EXTI Line4                   */                          
-  .word     DMA1_Stream0_IRQHandler           /* DMA1 Stream 0                */                  
-  .word     DMA1_Stream1_IRQHandler           /* DMA1 Stream 1                */                   
-  .word     DMA1_Stream2_IRQHandler           /* DMA1 Stream 2                */                   
-  .word     DMA1_Stream3_IRQHandler           /* DMA1 Stream 3                */                   
-  .word     DMA1_Stream4_IRQHandler           /* DMA1 Stream 4                */                   
-  .word     DMA1_Stream5_IRQHandler           /* DMA1 Stream 5                */                   
-  .word     DMA1_Stream6_IRQHandler           /* DMA1 Stream 6                */                   
-  .word     ADC_IRQHandler                    /* ADC1                         */                   
-  .word     0               				  /* Reserved                     */                         
-  .word     0              					  /* Reserved                     */                          
-  .word     0                                 /* Reserved                     */                          
-  .word     0                                 /* Reserved                     */                          
-  .word     EXTI9_5_IRQHandler                /* External Line[9:5]s          */                          
-  .word     TIM1_BRK_TIM9_IRQHandler          /* TIM1 Break and TIM9          */         
-  .word     TIM1_UP_TIM10_IRQHandler          /* TIM1 Update and TIM10        */         
-  .word     TIM1_TRG_COM_TIM11_IRQHandler     /* TIM1 Trigger and Commutation and TIM11 */
-  .word     TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */                          
-  .word     TIM2_IRQHandler                   /* TIM2                         */                   
-  .word     TIM3_IRQHandler                   /* TIM3                         */                   
-  .word     TIM4_IRQHandler                   /* TIM4                         */                   
-  .word     I2C1_EV_IRQHandler                /* I2C1 Event                   */                          
-  .word     I2C1_ER_IRQHandler                /* I2C1 Error                   */                          
-  .word     I2C2_EV_IRQHandler                /* I2C2 Event                   */                          
-  .word     I2C2_ER_IRQHandler                /* I2C2 Error                   */                            
-  .word     SPI1_IRQHandler                   /* SPI1                         */                   
-  .word     SPI2_IRQHandler                   /* SPI2                         */                   
-  .word     USART1_IRQHandler                 /* USART1                       */                   
-  .word     USART2_IRQHandler                 /* USART2                       */                   
-  .word     0               				  /* Reserved                     */                   
-  .word     EXTI15_10_IRQHandler              /* External Line[15:10]s        */                          
-  .word     RTC_Alarm_IRQHandler              /* RTC Alarm (A and B) through EXTI Line */                 
-  .word     OTG_FS_WKUP_IRQHandler            /* USB OTG FS Wakeup through EXTI line */                       
-  .word     0                                 /* Reserved     				        */         
-  .word     0                                 /* Reserved       			        */         
-  .word     0                                 /* Reserved 					          */
-  .word     0                                 /* Reserved                     */                          
-  .word     DMA1_Stream7_IRQHandler           /* DMA1 Stream7                 */                          
-  .word     0                                 /* Reserved                     */                   
-  .word     SDIO_IRQHandler                   /* SDIO                         */                   
-  .word     TIM5_IRQHandler                   /* TIM5                         */                   
-  .word     SPI3_IRQHandler                   /* SPI3                         */                   
-  .word     0                                 /* Reserved                     */                   
-  .word     0                                 /* Reserved                     */                   
-  .word     0                                 /* Reserved                     */                   
-  .word     0                                 /* Reserved                     */
-  .word     DMA2_Stream0_IRQHandler           /* DMA2 Stream 0                */                   
-  .word     DMA2_Stream1_IRQHandler           /* DMA2 Stream 1                */                   
-  .word     DMA2_Stream2_IRQHandler           /* DMA2 Stream 2                */                   
-  .word     DMA2_Stream3_IRQHandler           /* DMA2 Stream 3                */                   
-  .word     DMA2_Stream4_IRQHandler           /* DMA2 Stream 4                */                   
-  .word     0                    			        /* Reserved                     */                   
-  .word     0              					          /* Reserved                     */                     
-  .word     0              					          /* Reserved                     */                          
-  .word     0             					          /* Reserved                     */                          
-  .word     0              					          /* Reserved                     */                          
-  .word     0              					          /* Reserved                     */                          
-  .word     OTG_FS_IRQHandler                 /* USB OTG FS                   */                   
-  .word     DMA2_Stream5_IRQHandler           /* DMA2 Stream 5                */                   
-  .word     DMA2_Stream6_IRQHandler           /* DMA2 Stream 6                */                   
-  .word     DMA2_Stream7_IRQHandler           /* DMA2 Stream 7                */                   
-  .word     USART6_IRQHandler                 /* USART6                       */                    
-  .word     I2C3_EV_IRQHandler                /* I2C3 event                   */                          
-  .word     I2C3_ER_IRQHandler                /* I2C3 error                   */                          
-  .word     0                                 /* Reserved                     */                   
-  .word     0                                 /* Reserved                     */                   
-  .word     0                                 /* Reserved                     */                         
-  .word     0                                 /* Reserved                     */                   
-  .word     0                                 /* Reserved                     */                   
-  .word     0                                 /* Reserved                     */                   
-  .word     0                                 /* Reserved                     */
-  .word     FPU_IRQHandler                    /* FPU                          */
-  .word     0                                 /* Reserved                     */                   
-  .word     0                                 /* Reserved                     */
-  .word     SPI4_IRQHandler                   /* SPI4                         */     
-                    
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler. 
-* As they are weak aliases, any function with the same name will override 
-* this definition.
-* 
-*******************************************************************************/
-   .weak      NMI_Handler
-   .thumb_set NMI_Handler,Default_Handler
-  
-   .weak      HardFault_Handler
-   .thumb_set HardFault_Handler,Default_Handler
-  
-   .weak      MemManage_Handler
-   .thumb_set MemManage_Handler,Default_Handler
-  
-   .weak      BusFault_Handler
-   .thumb_set BusFault_Handler,Default_Handler
-
-   .weak      UsageFault_Handler
-   .thumb_set UsageFault_Handler,Default_Handler
-
-   .weak      SVC_Handler
-   .thumb_set SVC_Handler,Default_Handler
-
-   .weak      DebugMon_Handler
-   .thumb_set DebugMon_Handler,Default_Handler
-
-   .weak      PendSV_Handler
-   .thumb_set PendSV_Handler,Default_Handler
-
-   .weak      SysTick_Handler
-   .thumb_set SysTick_Handler,Default_Handler              
-  
-   .weak      WWDG_IRQHandler                   
-   .thumb_set WWDG_IRQHandler,Default_Handler      
-                  
-   .weak      PVD_IRQHandler      
-   .thumb_set PVD_IRQHandler,Default_Handler
-               
-   .weak      TAMP_STAMP_IRQHandler            
-   .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
-            
-   .weak      RTC_WKUP_IRQHandler                  
-   .thumb_set RTC_WKUP_IRQHandler,Default_Handler
-            
-   .weak      FLASH_IRQHandler         
-   .thumb_set FLASH_IRQHandler,Default_Handler
-                  
-   .weak      RCC_IRQHandler      
-   .thumb_set RCC_IRQHandler,Default_Handler
-                  
-   .weak      EXTI0_IRQHandler         
-   .thumb_set EXTI0_IRQHandler,Default_Handler
-                  
-   .weak      EXTI1_IRQHandler         
-   .thumb_set EXTI1_IRQHandler,Default_Handler
-                     
-   .weak      EXTI2_IRQHandler         
-   .thumb_set EXTI2_IRQHandler,Default_Handler 
-                 
-   .weak      EXTI3_IRQHandler         
-   .thumb_set EXTI3_IRQHandler,Default_Handler
-                        
-   .weak      EXTI4_IRQHandler         
-   .thumb_set EXTI4_IRQHandler,Default_Handler
-                  
-   .weak      DMA1_Stream0_IRQHandler               
-   .thumb_set DMA1_Stream0_IRQHandler,Default_Handler
-         
-   .weak      DMA1_Stream1_IRQHandler               
-   .thumb_set DMA1_Stream1_IRQHandler,Default_Handler
-                  
-   .weak      DMA1_Stream2_IRQHandler               
-   .thumb_set DMA1_Stream2_IRQHandler,Default_Handler
-                  
-   .weak      DMA1_Stream3_IRQHandler               
-   .thumb_set DMA1_Stream3_IRQHandler,Default_Handler 
-                 
-   .weak      DMA1_Stream4_IRQHandler              
-   .thumb_set DMA1_Stream4_IRQHandler,Default_Handler
-                  
-   .weak      DMA1_Stream5_IRQHandler               
-   .thumb_set DMA1_Stream5_IRQHandler,Default_Handler
-                  
-   .weak      DMA1_Stream6_IRQHandler               
-   .thumb_set DMA1_Stream6_IRQHandler,Default_Handler
-                  
-   .weak      ADC_IRQHandler      
-   .thumb_set ADC_IRQHandler,Default_Handler
-            
-   .weak      EXTI9_5_IRQHandler   
-   .thumb_set EXTI9_5_IRQHandler,Default_Handler
-            
-   .weak      TIM1_BRK_TIM9_IRQHandler            
-   .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
-            
-   .weak      TIM1_UP_TIM10_IRQHandler            
-   .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
-      
-   .weak      TIM1_TRG_COM_TIM11_IRQHandler      
-   .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
-      
-   .weak      TIM1_CC_IRQHandler   
-   .thumb_set TIM1_CC_IRQHandler,Default_Handler
-                  
-   .weak      TIM2_IRQHandler            
-   .thumb_set TIM2_IRQHandler,Default_Handler
-                  
-   .weak      TIM3_IRQHandler            
-   .thumb_set TIM3_IRQHandler,Default_Handler
-                  
-   .weak      TIM4_IRQHandler            
-   .thumb_set TIM4_IRQHandler,Default_Handler
-                  
-   .weak      I2C1_EV_IRQHandler   
-   .thumb_set I2C1_EV_IRQHandler,Default_Handler
-                     
-   .weak      I2C1_ER_IRQHandler   
-   .thumb_set I2C1_ER_IRQHandler,Default_Handler
-                     
-   .weak      I2C2_EV_IRQHandler   
-   .thumb_set I2C2_EV_IRQHandler,Default_Handler
-                  
-   .weak      I2C2_ER_IRQHandler   
-   .thumb_set I2C2_ER_IRQHandler,Default_Handler
-                           
-   .weak      SPI1_IRQHandler            
-   .thumb_set SPI1_IRQHandler,Default_Handler
-                        
-   .weak      SPI2_IRQHandler            
-   .thumb_set SPI2_IRQHandler,Default_Handler
-                  
-   .weak      USART1_IRQHandler      
-   .thumb_set USART1_IRQHandler,Default_Handler
-                     
-   .weak      USART2_IRQHandler      
-   .thumb_set USART2_IRQHandler,Default_Handler
-                                  
-   .weak      EXTI15_10_IRQHandler               
-   .thumb_set EXTI15_10_IRQHandler,Default_Handler
-               
-   .weak      RTC_Alarm_IRQHandler               
-   .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-            
-   .weak      OTG_FS_WKUP_IRQHandler         
-   .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
-            
-   .weak      DMA1_Stream7_IRQHandler               
-   .thumb_set DMA1_Stream7_IRQHandler,Default_Handler
-                     
-   .weak      SDIO_IRQHandler            
-   .thumb_set SDIO_IRQHandler,Default_Handler
-                     
-   .weak      TIM5_IRQHandler            
-   .thumb_set TIM5_IRQHandler,Default_Handler
-                     
-   .weak      SPI3_IRQHandler            
-   .thumb_set SPI3_IRQHandler,Default_Handler
-                     
-   .weak      DMA2_Stream0_IRQHandler               
-   .thumb_set DMA2_Stream0_IRQHandler,Default_Handler
-               
-   .weak      DMA2_Stream1_IRQHandler               
-   .thumb_set DMA2_Stream1_IRQHandler,Default_Handler
-                  
-   .weak      DMA2_Stream2_IRQHandler               
-   .thumb_set DMA2_Stream2_IRQHandler,Default_Handler
-            
-   .weak      DMA2_Stream3_IRQHandler               
-   .thumb_set DMA2_Stream3_IRQHandler,Default_Handler
-            
-   .weak      DMA2_Stream4_IRQHandler               
-   .thumb_set DMA2_Stream4_IRQHandler,Default_Handler
-            
-   .weak      OTG_FS_IRQHandler      
-   .thumb_set OTG_FS_IRQHandler,Default_Handler
-                     
-   .weak      DMA2_Stream5_IRQHandler               
-   .thumb_set DMA2_Stream5_IRQHandler,Default_Handler
-                  
-   .weak      DMA2_Stream6_IRQHandler               
-   .thumb_set DMA2_Stream6_IRQHandler,Default_Handler
-                  
-   .weak      DMA2_Stream7_IRQHandler               
-   .thumb_set DMA2_Stream7_IRQHandler,Default_Handler
-                  
-   .weak      USART6_IRQHandler      
-   .thumb_set USART6_IRQHandler,Default_Handler
-                        
-   .weak      I2C3_EV_IRQHandler   
-   .thumb_set I2C3_EV_IRQHandler,Default_Handler
-                        
-   .weak      I2C3_ER_IRQHandler   
-   .thumb_set I2C3_ER_IRQHandler,Default_Handler
-                        
-   .weak      FPU_IRQHandler                  
-   .thumb_set FPU_IRQHandler,Default_Handler  
-
-   .weak      SPI4_IRQHandler                  
-   .thumb_set SPI4_IRQHandler,Default_Handler 
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
+/**
+  ******************************************************************************
+  * @file      startup_stm32f401xc.s
+  * @author    MCD Application Team
+  * @brief     STM32F401xCxx Devices vector table for GCC based toolchains. 
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+    
+  .syntax unified
+  .cpu cortex-m4
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */  
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval : None
+*/
+
+    .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:  
+  ldr   sp, =_estack      /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */  
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system initialization function.*/
+  bl  SystemInit   
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl  main
+  bx  lr    
+.size  Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None     
+ * @retval None       
+*/
+    .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+* 
+*******************************************************************************/
+   .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+    
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  
+  /* External Interrupts */
+  .word     WWDG_IRQHandler                   /* Window WatchDog              */                                        
+  .word     PVD_IRQHandler                    /* PVD through EXTI Line detection */                        
+  .word     TAMP_STAMP_IRQHandler             /* Tamper and TimeStamps through the EXTI line */            
+  .word     RTC_WKUP_IRQHandler               /* RTC Wakeup through the EXTI line */                      
+  .word     FLASH_IRQHandler                  /* FLASH                        */                                          
+  .word     RCC_IRQHandler                    /* RCC                          */                                            
+  .word     EXTI0_IRQHandler                  /* EXTI Line0                   */                        
+  .word     EXTI1_IRQHandler                  /* EXTI Line1                   */                          
+  .word     EXTI2_IRQHandler                  /* EXTI Line2                   */                          
+  .word     EXTI3_IRQHandler                  /* EXTI Line3                   */                          
+  .word     EXTI4_IRQHandler                  /* EXTI Line4                   */                          
+  .word     DMA1_Stream0_IRQHandler           /* DMA1 Stream 0                */                  
+  .word     DMA1_Stream1_IRQHandler           /* DMA1 Stream 1                */                   
+  .word     DMA1_Stream2_IRQHandler           /* DMA1 Stream 2                */                   
+  .word     DMA1_Stream3_IRQHandler           /* DMA1 Stream 3                */                   
+  .word     DMA1_Stream4_IRQHandler           /* DMA1 Stream 4                */                   
+  .word     DMA1_Stream5_IRQHandler           /* DMA1 Stream 5                */                   
+  .word     DMA1_Stream6_IRQHandler           /* DMA1 Stream 6                */                   
+  .word     ADC_IRQHandler                    /* ADC1                         */                   
+  .word     0               				  /* Reserved                     */                         
+  .word     0              					  /* Reserved                     */                          
+  .word     0                                 /* Reserved                     */                          
+  .word     0                                 /* Reserved                     */                          
+  .word     EXTI9_5_IRQHandler                /* External Line[9:5]s          */                          
+  .word     TIM1_BRK_TIM9_IRQHandler          /* TIM1 Break and TIM9          */         
+  .word     TIM1_UP_TIM10_IRQHandler          /* TIM1 Update and TIM10        */         
+  .word     TIM1_TRG_COM_TIM11_IRQHandler     /* TIM1 Trigger and Commutation and TIM11 */
+  .word     TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */                          
+  .word     TIM2_IRQHandler                   /* TIM2                         */                   
+  .word     TIM3_IRQHandler                   /* TIM3                         */                   
+  .word     TIM4_IRQHandler                   /* TIM4                         */                   
+  .word     I2C1_EV_IRQHandler                /* I2C1 Event                   */                          
+  .word     I2C1_ER_IRQHandler                /* I2C1 Error                   */                          
+  .word     I2C2_EV_IRQHandler                /* I2C2 Event                   */                          
+  .word     I2C2_ER_IRQHandler                /* I2C2 Error                   */                            
+  .word     SPI1_IRQHandler                   /* SPI1                         */                   
+  .word     SPI2_IRQHandler                   /* SPI2                         */                   
+  .word     USART1_IRQHandler                 /* USART1                       */                   
+  .word     USART2_IRQHandler                 /* USART2                       */                   
+  .word     0               				  /* Reserved                     */                   
+  .word     EXTI15_10_IRQHandler              /* External Line[15:10]s        */                          
+  .word     RTC_Alarm_IRQHandler              /* RTC Alarm (A and B) through EXTI Line */                 
+  .word     OTG_FS_WKUP_IRQHandler            /* USB OTG FS Wakeup through EXTI line */                       
+  .word     0                                 /* Reserved     				        */         
+  .word     0                                 /* Reserved       			        */         
+  .word     0                                 /* Reserved 					          */
+  .word     0                                 /* Reserved                     */                          
+  .word     DMA1_Stream7_IRQHandler           /* DMA1 Stream7                 */                          
+  .word     0                                 /* Reserved                     */                   
+  .word     SDIO_IRQHandler                   /* SDIO                         */                   
+  .word     TIM5_IRQHandler                   /* TIM5                         */                   
+  .word     SPI3_IRQHandler                   /* SPI3                         */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */
+  .word     DMA2_Stream0_IRQHandler           /* DMA2 Stream 0                */                   
+  .word     DMA2_Stream1_IRQHandler           /* DMA2 Stream 1                */                   
+  .word     DMA2_Stream2_IRQHandler           /* DMA2 Stream 2                */                   
+  .word     DMA2_Stream3_IRQHandler           /* DMA2 Stream 3                */                   
+  .word     DMA2_Stream4_IRQHandler           /* DMA2 Stream 4                */                   
+  .word     0                    			        /* Reserved                     */                   
+  .word     0              					          /* Reserved                     */                     
+  .word     0              					          /* Reserved                     */                          
+  .word     0             					          /* Reserved                     */                          
+  .word     0              					          /* Reserved                     */                          
+  .word     0              					          /* Reserved                     */                          
+  .word     OTG_FS_IRQHandler                 /* USB OTG FS                   */                   
+  .word     DMA2_Stream5_IRQHandler           /* DMA2 Stream 5                */                   
+  .word     DMA2_Stream6_IRQHandler           /* DMA2 Stream 6                */                   
+  .word     DMA2_Stream7_IRQHandler           /* DMA2 Stream 7                */                   
+  .word     USART6_IRQHandler                 /* USART6                       */                    
+  .word     I2C3_EV_IRQHandler                /* I2C3 event                   */                          
+  .word     I2C3_ER_IRQHandler                /* I2C3 error                   */                          
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */                         
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */
+  .word     FPU_IRQHandler                    /* FPU                          */
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */
+  .word     SPI4_IRQHandler                   /* SPI4                         */     
+                    
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+* 
+*******************************************************************************/
+   .weak      NMI_Handler
+   .thumb_set NMI_Handler,Default_Handler
+  
+   .weak      HardFault_Handler
+   .thumb_set HardFault_Handler,Default_Handler
+  
+   .weak      MemManage_Handler
+   .thumb_set MemManage_Handler,Default_Handler
+  
+   .weak      BusFault_Handler
+   .thumb_set BusFault_Handler,Default_Handler
+
+   .weak      UsageFault_Handler
+   .thumb_set UsageFault_Handler,Default_Handler
+
+   .weak      SVC_Handler
+   .thumb_set SVC_Handler,Default_Handler
+
+   .weak      DebugMon_Handler
+   .thumb_set DebugMon_Handler,Default_Handler
+
+   .weak      PendSV_Handler
+   .thumb_set PendSV_Handler,Default_Handler
+
+   .weak      SysTick_Handler
+   .thumb_set SysTick_Handler,Default_Handler              
+  
+   .weak      WWDG_IRQHandler                   
+   .thumb_set WWDG_IRQHandler,Default_Handler      
+                  
+   .weak      PVD_IRQHandler      
+   .thumb_set PVD_IRQHandler,Default_Handler
+               
+   .weak      TAMP_STAMP_IRQHandler            
+   .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+            
+   .weak      RTC_WKUP_IRQHandler                  
+   .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+            
+   .weak      FLASH_IRQHandler         
+   .thumb_set FLASH_IRQHandler,Default_Handler
+                  
+   .weak      RCC_IRQHandler      
+   .thumb_set RCC_IRQHandler,Default_Handler
+                  
+   .weak      EXTI0_IRQHandler         
+   .thumb_set EXTI0_IRQHandler,Default_Handler
+                  
+   .weak      EXTI1_IRQHandler         
+   .thumb_set EXTI1_IRQHandler,Default_Handler
+                     
+   .weak      EXTI2_IRQHandler         
+   .thumb_set EXTI2_IRQHandler,Default_Handler 
+                 
+   .weak      EXTI3_IRQHandler         
+   .thumb_set EXTI3_IRQHandler,Default_Handler
+                        
+   .weak      EXTI4_IRQHandler         
+   .thumb_set EXTI4_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream0_IRQHandler               
+   .thumb_set DMA1_Stream0_IRQHandler,Default_Handler
+         
+   .weak      DMA1_Stream1_IRQHandler               
+   .thumb_set DMA1_Stream1_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream2_IRQHandler               
+   .thumb_set DMA1_Stream2_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream3_IRQHandler               
+   .thumb_set DMA1_Stream3_IRQHandler,Default_Handler 
+                 
+   .weak      DMA1_Stream4_IRQHandler              
+   .thumb_set DMA1_Stream4_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream5_IRQHandler               
+   .thumb_set DMA1_Stream5_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream6_IRQHandler               
+   .thumb_set DMA1_Stream6_IRQHandler,Default_Handler
+                  
+   .weak      ADC_IRQHandler      
+   .thumb_set ADC_IRQHandler,Default_Handler
+            
+   .weak      EXTI9_5_IRQHandler   
+   .thumb_set EXTI9_5_IRQHandler,Default_Handler
+            
+   .weak      TIM1_BRK_TIM9_IRQHandler            
+   .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+            
+   .weak      TIM1_UP_TIM10_IRQHandler            
+   .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+      
+   .weak      TIM1_TRG_COM_TIM11_IRQHandler      
+   .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+      
+   .weak      TIM1_CC_IRQHandler   
+   .thumb_set TIM1_CC_IRQHandler,Default_Handler
+                  
+   .weak      TIM2_IRQHandler            
+   .thumb_set TIM2_IRQHandler,Default_Handler
+                  
+   .weak      TIM3_IRQHandler            
+   .thumb_set TIM3_IRQHandler,Default_Handler
+                  
+   .weak      TIM4_IRQHandler            
+   .thumb_set TIM4_IRQHandler,Default_Handler
+                  
+   .weak      I2C1_EV_IRQHandler   
+   .thumb_set I2C1_EV_IRQHandler,Default_Handler
+                     
+   .weak      I2C1_ER_IRQHandler   
+   .thumb_set I2C1_ER_IRQHandler,Default_Handler
+                     
+   .weak      I2C2_EV_IRQHandler   
+   .thumb_set I2C2_EV_IRQHandler,Default_Handler
+                  
+   .weak      I2C2_ER_IRQHandler   
+   .thumb_set I2C2_ER_IRQHandler,Default_Handler
+                           
+   .weak      SPI1_IRQHandler            
+   .thumb_set SPI1_IRQHandler,Default_Handler
+                        
+   .weak      SPI2_IRQHandler            
+   .thumb_set SPI2_IRQHandler,Default_Handler
+                  
+   .weak      USART1_IRQHandler      
+   .thumb_set USART1_IRQHandler,Default_Handler
+                     
+   .weak      USART2_IRQHandler      
+   .thumb_set USART2_IRQHandler,Default_Handler
+                                  
+   .weak      EXTI15_10_IRQHandler               
+   .thumb_set EXTI15_10_IRQHandler,Default_Handler
+               
+   .weak      RTC_Alarm_IRQHandler               
+   .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+            
+   .weak      OTG_FS_WKUP_IRQHandler         
+   .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+            
+   .weak      DMA1_Stream7_IRQHandler               
+   .thumb_set DMA1_Stream7_IRQHandler,Default_Handler
+                     
+   .weak      SDIO_IRQHandler            
+   .thumb_set SDIO_IRQHandler,Default_Handler
+                     
+   .weak      TIM5_IRQHandler            
+   .thumb_set TIM5_IRQHandler,Default_Handler
+                     
+   .weak      SPI3_IRQHandler            
+   .thumb_set SPI3_IRQHandler,Default_Handler
+                     
+   .weak      DMA2_Stream0_IRQHandler               
+   .thumb_set DMA2_Stream0_IRQHandler,Default_Handler
+               
+   .weak      DMA2_Stream1_IRQHandler               
+   .thumb_set DMA2_Stream1_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream2_IRQHandler               
+   .thumb_set DMA2_Stream2_IRQHandler,Default_Handler
+            
+   .weak      DMA2_Stream3_IRQHandler               
+   .thumb_set DMA2_Stream3_IRQHandler,Default_Handler
+            
+   .weak      DMA2_Stream4_IRQHandler               
+   .thumb_set DMA2_Stream4_IRQHandler,Default_Handler
+            
+   .weak      OTG_FS_IRQHandler      
+   .thumb_set OTG_FS_IRQHandler,Default_Handler
+                     
+   .weak      DMA2_Stream5_IRQHandler               
+   .thumb_set DMA2_Stream5_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream6_IRQHandler               
+   .thumb_set DMA2_Stream6_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream7_IRQHandler               
+   .thumb_set DMA2_Stream7_IRQHandler,Default_Handler
+                  
+   .weak      USART6_IRQHandler      
+   .thumb_set USART6_IRQHandler,Default_Handler
+                        
+   .weak      I2C3_EV_IRQHandler   
+   .thumb_set I2C3_EV_IRQHandler,Default_Handler
+                        
+   .weak      I2C3_ER_IRQHandler   
+   .thumb_set I2C3_ER_IRQHandler,Default_Handler
+                        
+   .weak      FPU_IRQHandler                  
+   .thumb_set FPU_IRQHandler,Default_Handler  
+
+   .weak      SPI4_IRQHandler                  
+   .thumb_set SPI4_IRQHandler,Default_Handler 

Soft/STM32/Controle/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f401xc.h

@@ -12,13 +12,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -814,7 +813,15 @@ typedef struct
 /** @addtogroup Exported_constants
   * @{
   */
-  
+
+/** @addtogroup Hardware_Constant_Definition
+  * @{
+  */
+#define LSI_STARTUP_TIME                40U /*!< LSI Maximum startup time in us */
+/**
+  * @}
+  */
+
   /** @addtogroup Peripheral_Registers_Bits_Definition
   * @{
   */
@@ -2281,17 +2288,18 @@ typedef struct
 /*                                                                            */
 /******************************************************************************/
 /*******************  Bits definition for FLASH_ACR register  *****************/
-#define FLASH_ACR_LATENCY_Pos          (0U)                                    
-#define FLASH_ACR_LATENCY_Msk          (0xFUL << FLASH_ACR_LATENCY_Pos)         /*!< 0x0000000F */
-#define FLASH_ACR_LATENCY              FLASH_ACR_LATENCY_Msk                   
-#define FLASH_ACR_LATENCY_0WS          0x00000000U                             
-#define FLASH_ACR_LATENCY_1WS          0x00000001U                             
-#define FLASH_ACR_LATENCY_2WS          0x00000002U                             
-#define FLASH_ACR_LATENCY_3WS          0x00000003U                             
-#define FLASH_ACR_LATENCY_4WS          0x00000004U                             
-#define FLASH_ACR_LATENCY_5WS          0x00000005U                             
-#define FLASH_ACR_LATENCY_6WS          0x00000006U                             
-#define FLASH_ACR_LATENCY_7WS          0x00000007U                             
+#define FLASH_ACR_LATENCY_Pos          (0U)
+#define FLASH_ACR_LATENCY_Msk          (0x7UL << FLASH_ACR_LATENCY_Pos)         /*!< 0x00000007 */
+#define FLASH_ACR_LATENCY              FLASH_ACR_LATENCY_Msk
+#define FLASH_ACR_LATENCY_0WS          0x00000000U
+#define FLASH_ACR_LATENCY_1WS          0x00000001U
+#define FLASH_ACR_LATENCY_2WS          0x00000002U
+#define FLASH_ACR_LATENCY_3WS          0x00000003U
+#define FLASH_ACR_LATENCY_4WS          0x00000004U
+#define FLASH_ACR_LATENCY_5WS          0x00000005U
+#define FLASH_ACR_LATENCY_6WS          0x00000006U
+#define FLASH_ACR_LATENCY_7WS          0x00000007U
+
 
 #define FLASH_ACR_PRFTEN_Pos           (8U)                                    
 #define FLASH_ACR_PRFTEN_Msk           (0x1UL << FLASH_ACR_PRFTEN_Pos)          /*!< 0x00000100 */
@@ -2370,6 +2378,9 @@ typedef struct
 #define FLASH_CR_EOPIE_Pos             (24U)                                   
 #define FLASH_CR_EOPIE_Msk             (0x1UL << FLASH_CR_EOPIE_Pos)            /*!< 0x01000000 */
 #define FLASH_CR_EOPIE                 FLASH_CR_EOPIE_Msk                      
+#define FLASH_CR_ERRIE_Pos             (25U)
+#define FLASH_CR_ERRIE_Msk             (0x1UL << FLASH_CR_ERRIE_Pos)
+#define FLASH_CR_ERRIE                 FLASH_CR_ERRIE_Msk
 #define FLASH_CR_LOCK_Pos              (31U)                                   
 #define FLASH_CR_LOCK_Msk              (0x1UL << FLASH_CR_LOCK_Pos)             /*!< 0x80000000 */
 #define FLASH_CR_LOCK                  FLASH_CR_LOCK_Msk                       
@@ -2538,7 +2549,7 @@ typedef struct
 #define GPIO_MODER_MODE1                 GPIO_MODER_MODER1                  
 #define GPIO_MODER_MODE1_0               GPIO_MODER_MODER1_0
 #define GPIO_MODER_MODE1_1               GPIO_MODER_MODER1_1
-#define GPIO_MODER_MODE2_Pos             GPIO_MODER_MODER2_PoS
+#define GPIO_MODER_MODE2_Pos             GPIO_MODER_MODER2_Pos
 #define GPIO_MODER_MODE2_Msk             GPIO_MODER_MODER2_Msk
 #define GPIO_MODER_MODE2                 GPIO_MODER_MODER2                 
 #define GPIO_MODER_MODE2_0               GPIO_MODER_MODER2_0
@@ -2569,7 +2580,7 @@ typedef struct
 #define GPIO_MODER_MODE7_0               GPIO_MODER_MODER7_0
 #define GPIO_MODER_MODE7_1               GPIO_MODER_MODER7_1
 #define GPIO_MODER_MODE8_Pos             GPIO_MODER_MODER8_Pos
-#define GPIO_MODER_MODE8_Msk             GPIO_MODER_MODER2_Msk
+#define GPIO_MODER_MODE8_Msk             GPIO_MODER_MODER8_Msk
 #define GPIO_MODER_MODE8                 GPIO_MODER_MODER8
 #define GPIO_MODER_MODE8_0               GPIO_MODER_MODER8_0
 #define GPIO_MODER_MODE8_1               GPIO_MODER_MODER8_1
@@ -8396,7 +8407,7 @@ typedef struct
 #define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)(((INSTANCE) == TIM2) || \
                                               ((INSTANCE) == TIM5))
 
-/***************** TIM Instances : external trigger input availabe ************/
+/***************** TIM Instances : external trigger input available ************/
 #define IS_TIM_ETR_INSTANCE(INSTANCE)  (((INSTANCE) == TIM1) || \
                                         ((INSTANCE) == TIM2) || \
                                         ((INSTANCE) == TIM3) || \
@@ -8628,7 +8639,3 @@ typedef struct
 #endif /* __cplusplus */
 
 #endif /* __STM32F401xC_H */
-
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h

@@ -8,21 +8,20 @@
   *          is using in the C source code, usually in main.c. This file contains:
   *           - Configuration section that allows to select:
   *              - The STM32F4xx device used in the target application
-  *              - To use or not the peripheral’s drivers in application code(i.e. 
-  *                code will be based on direct access to peripheral’s registers 
+  *              - To use or not the peripheral's drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral's registers 
   *                rather than drivers API), this option is controlled by 
   *                "#define USE_HAL_DRIVER"
   *  
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -106,16 +105,16 @@
 #endif /* USE_HAL_DRIVER */
 
 /**
-  * @brief CMSIS version number V2.6.5
+  * @brief CMSIS version number V2.6.8
   */
 #define __STM32F4xx_CMSIS_VERSION_MAIN   (0x02U) /*!< [31:24] main version */
 #define __STM32F4xx_CMSIS_VERSION_SUB1   (0x06U) /*!< [23:16] sub1 version */
-#define __STM32F4xx_CMSIS_VERSION_SUB2   (0x05U) /*!< [15:8]  sub2 version */
+#define __STM32F4xx_CMSIS_VERSION_SUB2   (0x08U) /*!< [15:8]  sub2 version */
 #define __STM32F4xx_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
 #define __STM32F4xx_CMSIS_VERSION        ((__STM32F4xx_CMSIS_VERSION_MAIN << 24)\
                                          |(__STM32F4xx_CMSIS_VERSION_SUB1 << 16)\
                                          |(__STM32F4xx_CMSIS_VERSION_SUB2 << 8 )\
-                                         |(__STM32F4xx_CMSIS_VERSION))
+                                         |(__STM32F4xx_CMSIS_VERSION_RC))
 
 /**
   * @}
@@ -225,6 +224,60 @@ typedef enum
 
 #define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
 
+/* Use of CMSIS compiler intrinsics for register exclusive access */
+/* Atomic 32-bit register access macro to set one or several bits */
+#define ATOMIC_SET_BIT(REG, BIT)                             \
+  do {                                                       \
+    uint32_t val;                                            \
+    do {                                                     \
+      val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT);       \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 32-bit register access macro to clear one or several bits */
+#define ATOMIC_CLEAR_BIT(REG, BIT)                           \
+  do {                                                       \
+    uint32_t val;                                            \
+    do {                                                     \
+      val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT);      \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 32-bit register access macro to clear and set one or several bits */
+#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK)                          \
+  do {                                                                     \
+    uint32_t val;                                                          \
+    do {                                                                   \
+      val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U);               \
+  } while(0)
+
+/* Atomic 16-bit register access macro to set one or several bits */
+#define ATOMIC_SETH_BIT(REG, BIT)                            \
+  do {                                                       \
+    uint16_t val;                                            \
+    do {                                                     \
+      val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT);       \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 16-bit register access macro to clear one or several bits */
+#define ATOMIC_CLEARH_BIT(REG, BIT)                          \
+  do {                                                       \
+    uint16_t val;                                            \
+    do {                                                     \
+      val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT);      \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 16-bit register access macro to clear and set one or several bits */
+#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK)                         \
+  do {                                                                     \
+    uint16_t val;                                                          \
+    do {                                                                   \
+      val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U);               \
+  } while(0)
 
 /**
   * @}
@@ -246,8 +299,3 @@ typedef enum
 /**
   * @}
   */
-  
-
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h

@@ -3,32 +3,15 @@
   * @file    system_stm32f4xx.h
   * @author  MCD Application Team
   * @brief   CMSIS Cortex-M4 Device System Source File for STM32F4xx devices.       
-  ******************************************************************************  
+  ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************  
   */ 
@@ -119,4 +102,3 @@ extern void SystemCoreClockUpdate(void);
 /**
   * @}
   */  
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/CMSIS/Device/ST/STM32F4xx/LICENSE.txt

@@ -0,0 +1,6 @@
+This software component is provided to you as part of a software package and
+applicable license terms are in the  Package_license file. If you received this
+software component outside of a package or without applicable license terms,
+the terms of the Apache-2.0 license shall apply. 
+You may obtain a copy of the Apache-2.0 at:
+https://opensource.org/licenses/Apache-2.0

Soft/STM32/Controle/Drivers/CMSIS/LICENSE.txt

@@ -1,201 +1,201 @@
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
-   APPENDIX: How to apply the Apache License to your work.
-
-      To apply the Apache License to your work, attach the following
-      boilerplate notice, with the fields enclosed by brackets "{}"
-      replaced with your own identifying information. (Don't include
-      the brackets!)  The text should be enclosed in the appropriate
-      comment syntax for the file format. We also recommend that a
-      file or class name and description of purpose be included on the
-      same "printed page" as the copyright notice for easier
-      identification within third-party archives.
-
-   Copyright {yyyy} {name of copyright owner}
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "{}"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright {yyyy} {name of copyright owner}
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h

@@ -7,13 +7,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -23,7 +22,7 @@
 #define STM32_HAL_LEGACY
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -38,7 +37,16 @@
 #define AES_CLEARFLAG_CCF               CRYP_CLEARFLAG_CCF
 #define AES_CLEARFLAG_RDERR             CRYP_CLEARFLAG_RDERR
 #define AES_CLEARFLAG_WRERR             CRYP_CLEARFLAG_WRERR
-
+#if defined(STM32U5) || defined(STM32H7) || defined(STM32MP1)
+#define CRYP_DATATYPE_32B               CRYP_NO_SWAP
+#define CRYP_DATATYPE_16B               CRYP_HALFWORD_SWAP
+#define CRYP_DATATYPE_8B                CRYP_BYTE_SWAP
+#define CRYP_DATATYPE_1B                CRYP_BIT_SWAP
+#if defined(STM32U5)
+#define CRYP_CCF_CLEAR                  CRYP_CLEAR_CCF
+#define CRYP_ERR_CLEAR                  CRYP_CLEAR_RWEIF
+#endif /* STM32U5 */
+#endif /* STM32U5 || STM32H7 || STM32MP1 */
 /**
   * @}
   */
@@ -98,6 +106,13 @@
 #if defined(STM32H7)
 #define ADC_CHANNEL_VBAT_DIV4           ADC_CHANNEL_VBAT
 #endif /* STM32H7 */
+
+#if defined(STM32U5)
+#define ADC_SAMPLETIME_5CYCLE           ADC_SAMPLETIME_5CYCLES
+#define ADC_SAMPLETIME_391CYCLES_5      ADC_SAMPLETIME_391CYCLES
+#define ADC4_SAMPLETIME_160CYCLES_5     ADC4_SAMPLETIME_814CYCLES_5
+#endif /* STM32U5 */
+
 /**
   * @}
   */
@@ -207,6 +222,23 @@
   * @{
   */
 #define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig
+#if defined(STM32U5)
+#define  MPU_DEVICE_nGnRnE          MPU_DEVICE_NGNRNE
+#define  MPU_DEVICE_nGnRE           MPU_DEVICE_NGNRE
+#define  MPU_DEVICE_nGRE            MPU_DEVICE_NGRE
+#endif /* STM32U5 */
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Aliases CRC API aliases
+  * @{
+  */
+#if defined(STM32C0)
+#else
+#define HAL_CRC_Input_Data_Reverse   HAL_CRCEx_Input_Data_Reverse    /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility  */
+#define HAL_CRC_Output_Data_Reverse  HAL_CRCEx_Output_Data_Reverse   /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */
+#endif
 /**
   * @}
   */
@@ -236,12 +268,19 @@
 #define DAC_WAVEGENERATION_NOISE                        DAC_WAVE_NOISE
 #define DAC_WAVEGENERATION_TRIANGLE                     DAC_WAVE_TRIANGLE
 
-#if defined(STM32G4) || defined(STM32H7)
+#if defined(STM32G4) || defined(STM32H7) || defined (STM32U5)
 #define DAC_CHIPCONNECT_DISABLE       DAC_CHIPCONNECT_EXTERNAL
 #define DAC_CHIPCONNECT_ENABLE        DAC_CHIPCONNECT_INTERNAL
 #endif
 
-#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4)
+#if defined(STM32U5)
+#define DAC_TRIGGER_STOP_LPTIM1_OUT  DAC_TRIGGER_STOP_LPTIM1_CH1
+#define DAC_TRIGGER_STOP_LPTIM3_OUT  DAC_TRIGGER_STOP_LPTIM3_CH1
+#define DAC_TRIGGER_LPTIM1_OUT       DAC_TRIGGER_LPTIM1_CH1
+#define DAC_TRIGGER_LPTIM3_OUT       DAC_TRIGGER_LPTIM3_CH1
+#endif
+
+#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4)
 #define HAL_DAC_MSP_INIT_CB_ID       HAL_DAC_MSPINIT_CB_ID
 #define HAL_DAC_MSP_DEINIT_CB_ID     HAL_DAC_MSPDEINIT_CB_ID
 #endif
@@ -313,8 +352,13 @@
 #endif /* STM32L4 */
 
 #if defined(STM32G0)
-#define DMA_REQUEST_DAC1_CHANNEL1								 DMA_REQUEST_DAC1_CH1
-#define DMA_REQUEST_DAC1_CHANNEL2								 DMA_REQUEST_DAC1_CH2
+#define DMA_REQUEST_DAC1_CHANNEL1                DMA_REQUEST_DAC1_CH1
+#define DMA_REQUEST_DAC1_CHANNEL2                DMA_REQUEST_DAC1_CH2
+#define DMA_REQUEST_TIM16_TRIG_COM               DMA_REQUEST_TIM16_COM
+#define DMA_REQUEST_TIM17_TRIG_COM               DMA_REQUEST_TIM17_COM
+
+#define LL_DMAMUX_REQ_TIM16_TRIG_COM             LL_DMAMUX_REQ_TIM16_COM
+#define LL_DMAMUX_REQ_TIM17_TRIG_COM             LL_DMAMUX_REQ_TIM17_COM
 #endif
 
 #if defined(STM32H7)
@@ -379,6 +423,9 @@
 
 #endif /* STM32H7 */
 
+#if defined(STM32U5)
+#define GPDMA1_REQUEST_DCMI                        GPDMA1_REQUEST_DCMI_PSSI
+#endif /* STM32U5 */
 /**
   * @}
   */
@@ -458,7 +505,7 @@
 #define OB_RDP_LEVEL0                 OB_RDP_LEVEL_0
 #define OB_RDP_LEVEL1                 OB_RDP_LEVEL_1
 #define OB_RDP_LEVEL2                 OB_RDP_LEVEL_2
-#if defined(STM32G0)
+#if defined(STM32G0) || defined(STM32C0)
 #define OB_BOOT_LOCK_DISABLE          OB_BOOT_ENTRY_FORCED_NONE
 #define OB_BOOT_LOCK_ENABLE           OB_BOOT_ENTRY_FORCED_FLASH
 #else
@@ -466,15 +513,24 @@
 #define OB_BOOT_ENTRY_FORCED_FLASH    OB_BOOT_LOCK_ENABLE
 #endif
 #if defined(STM32H7)
-#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1
-#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1
-#define FLASH_FLAG_STRBER_BANK1R  FLASH_FLAG_STRBERR_BANK1
-#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2
-#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2
-#define FLASH_FLAG_STRBER_BANK2R  FLASH_FLAG_STRBERR_BANK2
-#define FLASH_FLAG_WDW            FLASH_FLAG_WBNE
-#define OB_WRP_SECTOR_All         OB_WRP_SECTOR_ALL
+#define FLASH_FLAG_SNECCE_BANK1RR     FLASH_FLAG_SNECCERR_BANK1
+#define FLASH_FLAG_DBECCE_BANK1RR     FLASH_FLAG_DBECCERR_BANK1
+#define FLASH_FLAG_STRBER_BANK1R      FLASH_FLAG_STRBERR_BANK1
+#define FLASH_FLAG_SNECCE_BANK2RR     FLASH_FLAG_SNECCERR_BANK2
+#define FLASH_FLAG_DBECCE_BANK2RR     FLASH_FLAG_DBECCERR_BANK2
+#define FLASH_FLAG_STRBER_BANK2R      FLASH_FLAG_STRBERR_BANK2
+#define FLASH_FLAG_WDW                FLASH_FLAG_WBNE
+#define OB_WRP_SECTOR_All             OB_WRP_SECTOR_ALL
 #endif /* STM32H7 */
+#if defined(STM32U5)
+#define OB_USER_nRST_STOP             OB_USER_NRST_STOP
+#define OB_USER_nRST_STDBY            OB_USER_NRST_STDBY
+#define OB_USER_nRST_SHDW             OB_USER_NRST_SHDW
+#define OB_USER_nSWBOOT0              OB_USER_NSWBOOT0
+#define OB_USER_nBOOT0                OB_USER_NBOOT0
+#define OB_nBOOT0_RESET               OB_NBOOT0_RESET
+#define OB_nBOOT0_SET                 OB_NBOOT0_SET
+#endif /* STM32U5 */
 
 /**
   * @}
@@ -517,6 +573,7 @@
 #define HAL_SYSCFG_EnableIOAnalogSwitchVDD        HAL_SYSCFG_EnableIOSwitchVDD
 #define HAL_SYSCFG_DisableIOAnalogSwitchVDD       HAL_SYSCFG_DisableIOSwitchVDD
 #endif /* STM32G4 */
+
 /**
   * @}
   */
@@ -591,27 +648,45 @@
 #define GPIO_AF1_LPTIM                            GPIO_AF1_LPTIM1
 #define GPIO_AF2_LPTIM                            GPIO_AF2_LPTIM1
 
-#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7)
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5)
 #define  GPIO_SPEED_LOW                           GPIO_SPEED_FREQ_LOW
 #define  GPIO_SPEED_MEDIUM                        GPIO_SPEED_FREQ_MEDIUM
 #define  GPIO_SPEED_FAST                          GPIO_SPEED_FREQ_HIGH
 #define  GPIO_SPEED_HIGH                          GPIO_SPEED_FREQ_VERY_HIGH
-#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB || STM32U5*/
 
 #if defined(STM32L1)
- #define  GPIO_SPEED_VERY_LOW    GPIO_SPEED_FREQ_LOW
- #define  GPIO_SPEED_LOW         GPIO_SPEED_FREQ_MEDIUM
- #define  GPIO_SPEED_MEDIUM      GPIO_SPEED_FREQ_HIGH
- #define  GPIO_SPEED_HIGH        GPIO_SPEED_FREQ_VERY_HIGH
+#define  GPIO_SPEED_VERY_LOW    GPIO_SPEED_FREQ_LOW
+#define  GPIO_SPEED_LOW         GPIO_SPEED_FREQ_MEDIUM
+#define  GPIO_SPEED_MEDIUM      GPIO_SPEED_FREQ_HIGH
+#define  GPIO_SPEED_HIGH        GPIO_SPEED_FREQ_VERY_HIGH
 #endif /* STM32L1 */
 
 #if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
- #define  GPIO_SPEED_LOW    GPIO_SPEED_FREQ_LOW
- #define  GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
- #define  GPIO_SPEED_HIGH   GPIO_SPEED_FREQ_HIGH
+#define  GPIO_SPEED_LOW    GPIO_SPEED_FREQ_LOW
+#define  GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+#define  GPIO_SPEED_HIGH   GPIO_SPEED_FREQ_HIGH
 #endif /* STM32F0 || STM32F3 || STM32F1 */
 
 #define GPIO_AF6_DFSDM                            GPIO_AF6_DFSDM1
+
+#if defined(STM32U5)
+#define GPIO_AF0_RTC_50Hz                         GPIO_AF0_RTC_50HZ
+#endif /* STM32U5 */
+#if defined(STM32U5)
+#define GPIO_AF0_S2DSTOP                          GPIO_AF0_SRDSTOP
+#define GPIO_AF11_LPGPIO                          GPIO_AF11_LPGPIO1
+#endif /* STM32U5 */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_GTZC_Aliased_Defines HAL GTZC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#if defined(STM32U5)
+#define GTZC_PERIPH_DCMI                      GTZC_PERIPH_DCMI_PSSI
+#endif /* STM32U5 */
 /**
   * @}
   */
@@ -643,6 +718,10 @@
 #define HAL_HRTIM_ExternalEventCounterEnable    HAL_HRTIM_ExtEventCounterEnable
 #define HAL_HRTIM_ExternalEventCounterDisable   HAL_HRTIM_ExtEventCounterDisable
 #define HAL_HRTIM_ExternalEventCounterReset     HAL_HRTIM_ExtEventCounterReset
+#define HRTIM_TIMEEVENT_A                       HRTIM_EVENTCOUNTER_A
+#define HRTIM_TIMEEVENT_B                       HRTIM_EVENTCOUNTER_B
+#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL  HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL
+#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL    HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL
 #endif /* STM32G4 */
 
 #if defined(STM32H7)
@@ -765,49 +844,6 @@
 #define HRTIM_EVENTSRC_3              (HRTIM_EECR1_EE1SRC_1)
 #define HRTIM_EVENTSRC_4              (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0)
 
-/** @brief Constants defining the events that can be selected to configure the
-  *        set/reset crossbar of a timer output
-  */
-#define HRTIM_OUTPUTSET_TIMEV_1       (HRTIM_SET1R_TIMEVNT1)
-#define HRTIM_OUTPUTSET_TIMEV_2       (HRTIM_SET1R_TIMEVNT2)
-#define HRTIM_OUTPUTSET_TIMEV_3       (HRTIM_SET1R_TIMEVNT3)
-#define HRTIM_OUTPUTSET_TIMEV_4       (HRTIM_SET1R_TIMEVNT4)
-#define HRTIM_OUTPUTSET_TIMEV_5       (HRTIM_SET1R_TIMEVNT5)
-#define HRTIM_OUTPUTSET_TIMEV_6       (HRTIM_SET1R_TIMEVNT6)
-#define HRTIM_OUTPUTSET_TIMEV_7       (HRTIM_SET1R_TIMEVNT7)
-#define HRTIM_OUTPUTSET_TIMEV_8       (HRTIM_SET1R_TIMEVNT8)
-#define HRTIM_OUTPUTSET_TIMEV_9       (HRTIM_SET1R_TIMEVNT9)
-
-#define HRTIM_OUTPUTRESET_TIMEV_1     (HRTIM_RST1R_TIMEVNT1)
-#define HRTIM_OUTPUTRESET_TIMEV_2     (HRTIM_RST1R_TIMEVNT2)
-#define HRTIM_OUTPUTRESET_TIMEV_3     (HRTIM_RST1R_TIMEVNT3)
-#define HRTIM_OUTPUTRESET_TIMEV_4     (HRTIM_RST1R_TIMEVNT4)
-#define HRTIM_OUTPUTRESET_TIMEV_5     (HRTIM_RST1R_TIMEVNT5)
-#define HRTIM_OUTPUTRESET_TIMEV_6     (HRTIM_RST1R_TIMEVNT6)
-#define HRTIM_OUTPUTRESET_TIMEV_7     (HRTIM_RST1R_TIMEVNT7)
-#define HRTIM_OUTPUTRESET_TIMEV_8     (HRTIM_RST1R_TIMEVNT8)
-#define HRTIM_OUTPUTRESET_TIMEV_9     (HRTIM_RST1R_TIMEVNT9)
-
-/** @brief Constants defining the event filtering applied to external events
-  *        by a timer
-  */
-#define HRTIM_TIMEVENTFILTER_NONE             (0x00000000U)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1     (HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2     (HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3     (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4     (HRTIM_EEFR1_EE1FLTR_2)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1    (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2    (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3    (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4    (HRTIM_EEFR1_EE1FLTR_3)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2)
-#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM     (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-
 /** @brief Constants defining the DLL calibration periods (in micro seconds)
   */
 #define HRTIM_CALIBRATIONRATE_7300             0x00000000U
@@ -888,6 +924,20 @@
 #define LPTIM_TRIGSAMPLETIME_4TRANSITION        LPTIM_TRIGSAMPLETIME_4TRANSITIONS
 #define LPTIM_TRIGSAMPLETIME_8TRANSITION        LPTIM_TRIGSAMPLETIME_8TRANSITIONS
 
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define HAL_LPTIM_ReadCompare      HAL_LPTIM_ReadCapturedValue
+/**
+  * @}
+  */
+
+#if defined(STM32U5)
+#define LPTIM_ISR_CC1        LPTIM_ISR_CC1IF
+#define LPTIM_ISR_CC2        LPTIM_ISR_CC2IF
+#define LPTIM_CHANNEL_ALL    0x00000000U
+#endif /* STM32U5 */
 /**
   * @}
   */
@@ -955,11 +1005,16 @@
 #define OPAMP_PGACONNECT_VM0                  OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
 #define OPAMP_PGACONNECT_VM1                  OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
 
-#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7)
+#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4)
 #define HAL_OPAMP_MSP_INIT_CB_ID       HAL_OPAMP_MSPINIT_CB_ID
 #define HAL_OPAMP_MSP_DEINIT_CB_ID     HAL_OPAMP_MSPDEINIT_CB_ID
 #endif
 
+#if defined(STM32L4) || defined(STM32L5)
+#define OPAMP_POWERMODE_NORMAL                OPAMP_POWERMODE_NORMALPOWER
+#elif defined(STM32G4)
+#define OPAMP_POWERMODE_NORMAL                OPAMP_POWERMODE_NORMALSPEED
+#endif
 
 /**
   * @}
@@ -971,15 +1026,15 @@
 #define I2S_STANDARD_PHILLIPS      I2S_STANDARD_PHILIPS
 
 #if defined(STM32H7)
-  #define I2S_IT_TXE               I2S_IT_TXP
-  #define I2S_IT_RXNE              I2S_IT_RXP
+#define I2S_IT_TXE               I2S_IT_TXP
+#define I2S_IT_RXNE              I2S_IT_RXP
 
-  #define I2S_FLAG_TXE             I2S_FLAG_TXP
-  #define I2S_FLAG_RXNE            I2S_FLAG_RXP
+#define I2S_FLAG_TXE             I2S_FLAG_TXP
+#define I2S_FLAG_RXNE            I2S_FLAG_RXP
 #endif
 
 #if defined(STM32F7)
-  #define I2S_CLOCK_SYSCLK           I2S_CLOCK_PLL
+#define I2S_CLOCK_SYSCLK           I2S_CLOCK_PLL
 #endif
 /**
   * @}
@@ -1034,8 +1089,8 @@
 #define RTC_TAMPER1_2_3_INTERRUPT       RTC_ALL_TAMPER_INTERRUPT
 
 #define RTC_TIMESTAMPPIN_PC13  RTC_TIMESTAMPPIN_DEFAULT
-#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1
-#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PA0   RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PI8   RTC_TIMESTAMPPIN_POS1
 #define RTC_TIMESTAMPPIN_PC1   RTC_TIMESTAMPPIN_POS2
 
 #define RTC_OUTPUT_REMAP_PC13  RTC_OUTPUT_REMAP_NONE
@@ -1046,15 +1101,22 @@
 #define RTC_TAMPERPIN_PA0  RTC_TAMPERPIN_POS1
 #define RTC_TAMPERPIN_PI8  RTC_TAMPERPIN_POS1
 
+#if defined(STM32F7)
+#define RTC_TAMPCR_TAMPXE          RTC_TAMPER_ENABLE_BITS_MASK
+#define RTC_TAMPCR_TAMPXIE         RTC_TAMPER_IT_ENABLE_BITS_MASK
+#endif /* STM32F7 */
+
 #if defined(STM32H7)
 #define RTC_TAMPCR_TAMPXE          RTC_TAMPER_X
 #define RTC_TAMPCR_TAMPXIE         RTC_TAMPER_X_INTERRUPT
+#endif /* STM32H7 */
 
+#if defined(STM32F7) || defined(STM32H7)
 #define RTC_TAMPER1_INTERRUPT      RTC_IT_TAMP1
 #define RTC_TAMPER2_INTERRUPT      RTC_IT_TAMP2
 #define RTC_TAMPER3_INTERRUPT      RTC_IT_TAMP3
-#define RTC_ALL_TAMPER_INTERRUPT   RTC_IT_TAMPALL
-#endif /* STM32H7 */
+#define RTC_ALL_TAMPER_INTERRUPT   RTC_IT_TAMP
+#endif /* STM32F7 || STM32H7 */
 
 /**
   * @}
@@ -1114,16 +1176,16 @@
 
 #if defined(STM32H7)
 
- #define SPI_FLAG_TXE                    SPI_FLAG_TXP
- #define SPI_FLAG_RXNE                   SPI_FLAG_RXP
+#define SPI_FLAG_TXE                    SPI_FLAG_TXP
+#define SPI_FLAG_RXNE                   SPI_FLAG_RXP
 
- #define SPI_IT_TXE                      SPI_IT_TXP
- #define SPI_IT_RXNE                     SPI_IT_RXP
+#define SPI_IT_TXE                      SPI_IT_TXP
+#define SPI_IT_RXNE                     SPI_IT_RXP
 
- #define SPI_FRLVL_EMPTY                 SPI_RX_FIFO_0PACKET
- #define SPI_FRLVL_QUARTER_FULL          SPI_RX_FIFO_1PACKET
- #define SPI_FRLVL_HALF_FULL             SPI_RX_FIFO_2PACKET
- #define SPI_FRLVL_FULL                  SPI_RX_FIFO_3PACKET
+#define SPI_FRLVL_EMPTY                 SPI_RX_FIFO_0PACKET
+#define SPI_FRLVL_QUARTER_FULL          SPI_RX_FIFO_1PACKET
+#define SPI_FRLVL_HALF_FULL             SPI_RX_FIFO_2PACKET
+#define SPI_FRLVL_FULL                  SPI_RX_FIFO_3PACKET
 
 #endif /* STM32H7 */
 
@@ -1221,6 +1283,10 @@
 #define TIM_TIM3_TI1_COMP1COMP2_OUT   TIM_TIM3_TI1_COMP1_COMP2
 #endif
 
+#if defined(STM32U5) || defined(STM32MP2)
+#define OCREF_CLEAR_SELECT_Pos       OCREF_CLEAR_SELECT_POS
+#define OCREF_CLEAR_SELECT_Msk       OCREF_CLEAR_SELECT_MSK
+#endif
 /**
   * @}
   */
@@ -1409,6 +1475,20 @@
   */
 #endif  /* STM32L4 ||  STM32F7 ||  STM32F4 ||  STM32H7 */
 
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \
+  || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \
+  || defined(STM32H7) || defined(STM32U5)
+/** @defgroup DMA2D_Aliases DMA2D API Aliases
+  * @{
+  */
+#define HAL_DMA2D_DisableCLUT       HAL_DMA2D_CLUTLoading_Abort    /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort
+                                                                        for compatibility with legacy code */
+/**
+  * @}
+  */
+
+#endif  /* STM32L4 ||  STM32F7 ||  STM32F4 ||  STM32H7 || STM32U5 */
+
 /** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
   * @{
   */
@@ -1427,6 +1507,29 @@
   * @}
   */
 
+/** @defgroup HAL_DCACHE_Aliased_Functions HAL DCACHE Aliased Functions maintained for legacy purpose
+  * @{
+  */
+
+#if defined(STM32U5)
+#define HAL_DCACHE_CleanInvalidateByAddr     HAL_DCACHE_CleanInvalidByAddr
+#define HAL_DCACHE_CleanInvalidateByAddr_IT  HAL_DCACHE_CleanInvalidByAddr_IT
+#endif /* STM32U5 */
+
+/**
+  * @}
+  */
+
+#if !defined(STM32F2)
+/** @defgroup HASH_alias HASH API alias
+  * @{
+  */
+#define HAL_HASHEx_IRQHandler   HAL_HASH_IRQHandler  /*!< Redirection for compatibility with legacy code */
+/**
+  *
+  * @}
+  */
+#endif /* STM32F2 */
 /** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
   * @{
   */
@@ -1450,7 +1553,7 @@
 #define HASH_HMACKeyType_ShortKey  HASH_HMAC_KEYTYPE_SHORTKEY
 #define HASH_HMACKeyType_LongKey   HASH_HMAC_KEYTYPE_LONGKEY
 
-#if defined(STM32L4) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7)
+#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7)
 
 #define HAL_HASH_MD5_Accumulate                HAL_HASH_MD5_Accmlt
 #define HAL_HASH_MD5_Accumulate_End            HAL_HASH_MD5_Accmlt_End
@@ -1472,7 +1575,7 @@
 #define HAL_HASHEx_SHA256_Accumulate_IT        HAL_HASHEx_SHA256_Accmlt_IT
 #define HAL_HASHEx_SHA256_Accumulate_End_IT    HAL_HASHEx_SHA256_Accmlt_End_IT
 
-#endif  /* STM32L4 || STM32F4 || STM32F7 || STM32H7 */
+#endif  /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */
 /**
   * @}
   */
@@ -1486,7 +1589,8 @@
 #define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
 #define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
 #define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
-#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\
+                                              )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
 #define HAL_VREFINT_OutputSelect  HAL_SYSCFG_VREFINT_OutputSelect
 #define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
 #if defined(STM32L0)
@@ -1494,7 +1598,8 @@
 #define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
 #endif
 #define HAL_ADC_EnableBuffer_Cmd(cmd)  (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
-#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ?  HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\
+                                              )==ENABLE) ?  HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
 #if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ)
 #define HAL_EnableSRDomainDBGStopMode      HAL_EnableDomain3DBGStopMode
 #define HAL_DisableSRDomainDBGStopMode     HAL_DisableDomain3DBGStopMode
@@ -1517,9 +1622,9 @@
 #define HAL_DATA_EEPROMEx_Erase    HAL_FLASHEx_DATAEEPROM_Erase
 #define HAL_DATA_EEPROMEx_Program  HAL_FLASHEx_DATAEEPROM_Program
 
- /**
+/**
   * @}
-  */
+ */
 
 /** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
   * @{
@@ -1529,20 +1634,21 @@
 #define HAL_FMPI2CEx_AnalogFilter_Config      HAL_FMPI2CEx_ConfigAnalogFilter
 #define HAL_FMPI2CEx_DigitalFilter_Config     HAL_FMPI2CEx_ConfigDigitalFilter
 
-#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd\
+                                                                 )==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
 
-#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)
+#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1)
 #define HAL_I2C_Master_Sequential_Transmit_IT  HAL_I2C_Master_Seq_Transmit_IT
 #define HAL_I2C_Master_Sequential_Receive_IT   HAL_I2C_Master_Seq_Receive_IT
 #define HAL_I2C_Slave_Sequential_Transmit_IT   HAL_I2C_Slave_Seq_Transmit_IT
 #define HAL_I2C_Slave_Sequential_Receive_IT    HAL_I2C_Slave_Seq_Receive_IT
-#endif /* STM32H7 || STM32WB  || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 */
-#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)
+#endif /* STM32H7 || STM32WB  || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */
+#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1)
 #define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA
 #define HAL_I2C_Master_Sequential_Receive_DMA  HAL_I2C_Master_Seq_Receive_DMA
 #define HAL_I2C_Slave_Sequential_Transmit_DMA  HAL_I2C_Slave_Seq_Transmit_DMA
 #define HAL_I2C_Slave_Sequential_Receive_DMA   HAL_I2C_Slave_Seq_Receive_DMA
-#endif /* STM32H7 || STM32WB  || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 */
+#endif /* STM32H7 || STM32WB  || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */
 
 #if defined(STM32F4)
 #define HAL_FMPI2C_Master_Sequential_Transmit_IT  HAL_FMPI2C_Master_Seq_Transmit_IT
@@ -1554,19 +1660,19 @@
 #define HAL_FMPI2C_Slave_Sequential_Transmit_DMA  HAL_FMPI2C_Slave_Seq_Transmit_DMA
 #define HAL_FMPI2C_Slave_Sequential_Receive_DMA   HAL_FMPI2C_Slave_Seq_Receive_DMA
 #endif /* STM32F4 */
- /**
+/**
   * @}
-  */
+ */
 
 /** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
   * @{
   */
 
 #if defined(STM32G0)
-#define HAL_PWR_ConfigPVD															HAL_PWREx_ConfigPVD
-#define HAL_PWR_EnablePVD															HAL_PWREx_EnablePVD
-#define HAL_PWR_DisablePVD													  HAL_PWREx_DisablePVD
-#define HAL_PWR_PVD_IRQHandler											  HAL_PWREx_PVD_IRQHandler
+#define HAL_PWR_ConfigPVD                             HAL_PWREx_ConfigPVD
+#define HAL_PWR_EnablePVD                             HAL_PWREx_EnablePVD
+#define HAL_PWR_DisablePVD                            HAL_PWREx_DisablePVD
+#define HAL_PWR_PVD_IRQHandler                        HAL_PWREx_PVD_IRQHandler
 #endif
 #define HAL_PWR_PVDConfig                             HAL_PWR_ConfigPVD
 #define HAL_PWR_DisableBkUpReg                        HAL_PWREx_DisableBkUpReg
@@ -1611,9 +1717,82 @@
 
 #define PWR_MODE_EVT                                  PWR_PVD_MODE_NORMAL
 
- /**
+#if defined (STM32U5)
+#define PWR_SRAM1_PAGE1_STOP_RETENTION                PWR_SRAM1_PAGE1_STOP
+#define PWR_SRAM1_PAGE2_STOP_RETENTION                PWR_SRAM1_PAGE2_STOP
+#define PWR_SRAM1_PAGE3_STOP_RETENTION                PWR_SRAM1_PAGE3_STOP
+#define PWR_SRAM1_PAGE4_STOP_RETENTION                PWR_SRAM1_PAGE4_STOP
+#define PWR_SRAM1_PAGE5_STOP_RETENTION                PWR_SRAM1_PAGE5_STOP
+#define PWR_SRAM1_PAGE6_STOP_RETENTION                PWR_SRAM1_PAGE6_STOP
+#define PWR_SRAM1_PAGE7_STOP_RETENTION                PWR_SRAM1_PAGE7_STOP
+#define PWR_SRAM1_PAGE8_STOP_RETENTION                PWR_SRAM1_PAGE8_STOP
+#define PWR_SRAM1_PAGE9_STOP_RETENTION                PWR_SRAM1_PAGE9_STOP
+#define PWR_SRAM1_PAGE10_STOP_RETENTION               PWR_SRAM1_PAGE10_STOP
+#define PWR_SRAM1_PAGE11_STOP_RETENTION               PWR_SRAM1_PAGE11_STOP
+#define PWR_SRAM1_PAGE12_STOP_RETENTION               PWR_SRAM1_PAGE12_STOP
+#define PWR_SRAM1_FULL_STOP_RETENTION                 PWR_SRAM1_FULL_STOP
+
+#define PWR_SRAM2_PAGE1_STOP_RETENTION                PWR_SRAM2_PAGE1_STOP
+#define PWR_SRAM2_PAGE2_STOP_RETENTION                PWR_SRAM2_PAGE2_STOP
+#define PWR_SRAM2_FULL_STOP_RETENTION                 PWR_SRAM2_FULL_STOP
+
+#define PWR_SRAM3_PAGE1_STOP_RETENTION                PWR_SRAM3_PAGE1_STOP
+#define PWR_SRAM3_PAGE2_STOP_RETENTION                PWR_SRAM3_PAGE2_STOP
+#define PWR_SRAM3_PAGE3_STOP_RETENTION                PWR_SRAM3_PAGE3_STOP
+#define PWR_SRAM3_PAGE4_STOP_RETENTION                PWR_SRAM3_PAGE4_STOP
+#define PWR_SRAM3_PAGE5_STOP_RETENTION                PWR_SRAM3_PAGE5_STOP
+#define PWR_SRAM3_PAGE6_STOP_RETENTION                PWR_SRAM3_PAGE6_STOP
+#define PWR_SRAM3_PAGE7_STOP_RETENTION                PWR_SRAM3_PAGE7_STOP
+#define PWR_SRAM3_PAGE8_STOP_RETENTION                PWR_SRAM3_PAGE8_STOP
+#define PWR_SRAM3_PAGE9_STOP_RETENTION                PWR_SRAM3_PAGE9_STOP
+#define PWR_SRAM3_PAGE10_STOP_RETENTION               PWR_SRAM3_PAGE10_STOP
+#define PWR_SRAM3_PAGE11_STOP_RETENTION               PWR_SRAM3_PAGE11_STOP
+#define PWR_SRAM3_PAGE12_STOP_RETENTION               PWR_SRAM3_PAGE12_STOP
+#define PWR_SRAM3_PAGE13_STOP_RETENTION               PWR_SRAM3_PAGE13_STOP
+#define PWR_SRAM3_FULL_STOP_RETENTION                 PWR_SRAM3_FULL_STOP
+
+#define PWR_SRAM4_FULL_STOP_RETENTION                 PWR_SRAM4_FULL_STOP
+
+#define PWR_SRAM5_PAGE1_STOP_RETENTION                PWR_SRAM5_PAGE1_STOP
+#define PWR_SRAM5_PAGE2_STOP_RETENTION                PWR_SRAM5_PAGE2_STOP
+#define PWR_SRAM5_PAGE3_STOP_RETENTION                PWR_SRAM5_PAGE3_STOP
+#define PWR_SRAM5_PAGE4_STOP_RETENTION                PWR_SRAM5_PAGE4_STOP
+#define PWR_SRAM5_PAGE5_STOP_RETENTION                PWR_SRAM5_PAGE5_STOP
+#define PWR_SRAM5_PAGE6_STOP_RETENTION                PWR_SRAM5_PAGE6_STOP
+#define PWR_SRAM5_PAGE7_STOP_RETENTION                PWR_SRAM5_PAGE7_STOP
+#define PWR_SRAM5_PAGE8_STOP_RETENTION                PWR_SRAM5_PAGE8_STOP
+#define PWR_SRAM5_PAGE9_STOP_RETENTION                PWR_SRAM5_PAGE9_STOP
+#define PWR_SRAM5_PAGE10_STOP_RETENTION               PWR_SRAM5_PAGE10_STOP
+#define PWR_SRAM5_PAGE11_STOP_RETENTION               PWR_SRAM5_PAGE11_STOP
+#define PWR_SRAM5_PAGE12_STOP_RETENTION               PWR_SRAM5_PAGE12_STOP
+#define PWR_SRAM5_PAGE13_STOP_RETENTION               PWR_SRAM5_PAGE13_STOP
+#define PWR_SRAM5_FULL_STOP_RETENTION                 PWR_SRAM5_FULL_STOP
+
+#define PWR_ICACHE_FULL_STOP_RETENTION                PWR_ICACHE_FULL_STOP
+#define PWR_DCACHE1_FULL_STOP_RETENTION               PWR_DCACHE1_FULL_STOP
+#define PWR_DCACHE2_FULL_STOP_RETENTION               PWR_DCACHE2_FULL_STOP
+#define PWR_DMA2DRAM_FULL_STOP_RETENTION              PWR_DMA2DRAM_FULL_STOP
+#define PWR_PERIPHRAM_FULL_STOP_RETENTION             PWR_PERIPHRAM_FULL_STOP
+#define PWR_PKA32RAM_FULL_STOP_RETENTION              PWR_PKA32RAM_FULL_STOP
+#define PWR_GRAPHICPRAM_FULL_STOP_RETENTION           PWR_GRAPHICPRAM_FULL_STOP
+#define PWR_DSIRAM_FULL_STOP_RETENTION                PWR_DSIRAM_FULL_STOP
+
+#define PWR_SRAM2_PAGE1_STANDBY_RETENTION             PWR_SRAM2_PAGE1_STANDBY
+#define PWR_SRAM2_PAGE2_STANDBY_RETENTION             PWR_SRAM2_PAGE2_STANDBY
+#define PWR_SRAM2_FULL_STANDBY_RETENTION              PWR_SRAM2_FULL_STANDBY
+
+#define PWR_SRAM1_FULL_RUN_RETENTION                  PWR_SRAM1_FULL_RUN
+#define PWR_SRAM2_FULL_RUN_RETENTION                  PWR_SRAM2_FULL_RUN
+#define PWR_SRAM3_FULL_RUN_RETENTION                  PWR_SRAM3_FULL_RUN
+#define PWR_SRAM4_FULL_RUN_RETENTION                  PWR_SRAM4_FULL_RUN
+#define PWR_SRAM5_FULL_RUN_RETENTION                  PWR_SRAM5_FULL_RUN
+
+#define PWR_ALL_RAM_RUN_RETENTION_MASK                PWR_ALL_RAM_RUN_MASK
+#endif
+
+/**
   * @}
-  */
+ */
 
 /** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
   * @{
@@ -1862,15 +2041,15 @@
 #define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
 #define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
 #if defined(STM32H7)
-  #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1
-  #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1
-  #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1
-  #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1
 #else
-  #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
-  #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
-  #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
-  #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
 #endif /* STM32H7 */
 #define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
 #define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
@@ -2081,8 +2260,8 @@
   */
 
 #define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
-                          ((WAVE) == DAC_WAVE_NOISE)|| \
-                          ((WAVE) == DAC_WAVE_TRIANGLE))
+                           ((WAVE) == DAC_WAVE_NOISE)|| \
+                           ((WAVE) == DAC_WAVE_TRIANGLE))
 
 /**
   * @}
@@ -2138,7 +2317,7 @@
 #define IS_I2S_INSTANCE_EXT             IS_I2S_ALL_INSTANCE_EXT
 
 #if defined(STM32H7)
-  #define __HAL_I2S_CLEAR_FREFLAG       __HAL_I2S_CLEAR_TIFREFLAG
+#define __HAL_I2S_CLEAR_FREFLAG       __HAL_I2S_CLEAR_TIFREFLAG
 #endif
 
 /**
@@ -2275,7 +2454,8 @@
 #define RCC_StopWakeUpClock_HSI     RCC_STOP_WAKEUPCLOCK_HSI
 
 #define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
-#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd\
+                                         )==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
 
 #define __ADC_CLK_DISABLE          __HAL_RCC_ADC_CLK_DISABLE
 #define __ADC_CLK_ENABLE           __HAL_RCC_ADC_CLK_ENABLE
@@ -3243,9 +3423,8 @@
 #define RCC_MCOSOURCE_PLLCLK_NODIV  RCC_MCO1SOURCE_PLLCLK
 #define RCC_MCOSOURCE_PLLCLK_DIV2   RCC_MCO1SOURCE_PLLCLK_DIV2
 
-#if defined(STM32L4)
+#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL) || defined(STM32C0)
 #define RCC_RTCCLKSOURCE_NO_CLK     RCC_RTCCLKSOURCE_NONE
-#elif defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5)
 #else
 #define RCC_RTCCLKSOURCE_NONE       RCC_RTCCLKSOURCE_NO_CLK
 #endif
@@ -3356,6 +3535,38 @@
 #define RCC_DFSDM1CLKSOURCE_APB2            RCC_DFSDM1CLKSOURCE_PCLK2
 #define RCC_DFSDM2CLKSOURCE_APB2            RCC_DFSDM2CLKSOURCE_PCLK2
 #define RCC_FMPI2C1CLKSOURCE_APB            RCC_FMPI2C1CLKSOURCE_PCLK1
+#if defined(STM32U5)
+#define MSIKPLLModeSEL                        RCC_MSIKPLL_MODE_SEL
+#define MSISPLLModeSEL                        RCC_MSISPLL_MODE_SEL
+#define __HAL_RCC_AHB21_CLK_DISABLE           __HAL_RCC_AHB2_1_CLK_DISABLE
+#define __HAL_RCC_AHB22_CLK_DISABLE           __HAL_RCC_AHB2_2_CLK_DISABLE
+#define __HAL_RCC_AHB1_CLK_Disable_Clear      __HAL_RCC_AHB1_CLK_ENABLE
+#define __HAL_RCC_AHB21_CLK_Disable_Clear     __HAL_RCC_AHB2_1_CLK_ENABLE
+#define __HAL_RCC_AHB22_CLK_Disable_Clear     __HAL_RCC_AHB2_2_CLK_ENABLE
+#define __HAL_RCC_AHB3_CLK_Disable_Clear      __HAL_RCC_AHB3_CLK_ENABLE
+#define __HAL_RCC_APB1_CLK_Disable_Clear      __HAL_RCC_APB1_CLK_ENABLE
+#define __HAL_RCC_APB2_CLK_Disable_Clear      __HAL_RCC_APB2_CLK_ENABLE
+#define __HAL_RCC_APB3_CLK_Disable_Clear      __HAL_RCC_APB3_CLK_ENABLE
+#define IS_RCC_MSIPLLModeSelection            IS_RCC_MSIPLLMODE_SELECT
+#define RCC_PERIPHCLK_CLK48                   RCC_PERIPHCLK_ICLK
+#define RCC_CLK48CLKSOURCE_HSI48              RCC_ICLK_CLKSOURCE_HSI48
+#define RCC_CLK48CLKSOURCE_PLL2               RCC_ICLK_CLKSOURCE_PLL2
+#define RCC_CLK48CLKSOURCE_PLL1               RCC_ICLK_CLKSOURCE_PLL1
+#define RCC_CLK48CLKSOURCE_MSIK               RCC_ICLK_CLKSOURCE_MSIK
+#define __HAL_RCC_ADC1_CLK_ENABLE             __HAL_RCC_ADC12_CLK_ENABLE
+#define __HAL_RCC_ADC1_CLK_DISABLE            __HAL_RCC_ADC12_CLK_DISABLE
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED         __HAL_RCC_ADC12_IS_CLK_ENABLED
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED        __HAL_RCC_ADC12_IS_CLK_DISABLED
+#define __HAL_RCC_ADC1_FORCE_RESET            __HAL_RCC_ADC12_FORCE_RESET
+#define __HAL_RCC_ADC1_RELEASE_RESET          __HAL_RCC_ADC12_RELEASE_RESET
+#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE       __HAL_RCC_ADC12_CLK_SLEEP_ENABLE
+#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE      __HAL_RCC_ADC12_CLK_SLEEP_DISABLE
+#define __HAL_RCC_GET_CLK48_SOURCE            __HAL_RCC_GET_ICLK_SOURCE
+#define __HAL_RCC_PLLFRACN_ENABLE             __HAL_RCC_PLL_FRACN_ENABLE
+#define __HAL_RCC_PLLFRACN_DISABLE            __HAL_RCC_PLL_FRACN_DISABLE
+#define __HAL_RCC_PLLFRACN_CONFIG             __HAL_RCC_PLL_FRACN_CONFIG
+#define IS_RCC_PLLFRACN_VALUE                 IS_RCC_PLL_FRACN_VALUE
+#endif /* STM32U5 */
 
 /**
   * @}
@@ -3373,7 +3584,9 @@
 /** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
   * @{
   */
-#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4)
+#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx)|| \
+    defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5) || \
+    defined (STM32C0)
 #else
 #define __HAL_RTC_CLEAR_FLAG                      __HAL_RTC_EXTI_CLEAR_FLAG
 #endif
@@ -3393,19 +3606,19 @@
 #else
 #define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__)  (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
                                                    (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
-                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+                                                    __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
 #define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__)   (((__EXTI_LINE__)  == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
-                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
-                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+                                                   (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+                                                    __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
 #define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__)  (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
-                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
-                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+                                                   (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+                                                    __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
 #define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__)    (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
-                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
-                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+                                                   (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+                                                    __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
 #define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__)   (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
-                                                      (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() :  \
-                                                          __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+                                                       (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() :  \
+                                                        __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
 #endif   /* STM32F1 */
 
 #define IS_ALARM                                  IS_RTC_ALARM
@@ -3430,13 +3643,22 @@
   * @}
   */
 
-/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+/** @defgroup HAL_SD_Aliased_Macros HAL SD/MMC Aliased Macros maintained for legacy purpose
   * @{
   */
 
 #define SD_OCR_CID_CSD_OVERWRIETE   SD_OCR_CID_CSD_OVERWRITE
 #define SD_CMD_SD_APP_STAUS         SD_CMD_SD_APP_STATUS
 
+#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32L1)
+#define eMMC_HIGH_VOLTAGE_RANGE     EMMC_HIGH_VOLTAGE_RANGE
+#define eMMC_DUAL_VOLTAGE_RANGE     EMMC_DUAL_VOLTAGE_RANGE
+#define eMMC_LOW_VOLTAGE_RANGE      EMMC_LOW_VOLTAGE_RANGE
+
+#define SDMMC_NSpeed_CLK_DIV        SDMMC_NSPEED_CLK_DIV
+#define SDMMC_HSpeed_CLK_DIV        SDMMC_HSPEED_CLK_DIV
+#endif
+
 #if defined(STM32F4) || defined(STM32F2)
 #define  SD_SDMMC_DISABLED          SD_SDIO_DISABLED
 #define  SD_SDMMC_FUNCTION_BUSY     SD_SDIO_FUNCTION_BUSY
@@ -3481,9 +3703,9 @@
 #define  __HAL_SD_SDIO_CLEAR_FLAG   __HAL_SD_SDMMC_CLEAR_FLAG
 #define  __HAL_SD_SDIO_GET_IT       __HAL_SD_SDMMC_GET_IT
 #define  __HAL_SD_SDIO_CLEAR_IT     __HAL_SD_SDMMC_CLEAR_IT
-#define  SDIO_STATIC_FLAGS	        SDMMC_STATIC_FLAGS
-#define  SDIO_CMD0TIMEOUT	          SDMMC_CMD0TIMEOUT
-#define  SD_SDIO_SEND_IF_COND	      SD_SDMMC_SEND_IF_COND
+#define  SDIO_STATIC_FLAGS          SDMMC_STATIC_FLAGS
+#define  SDIO_CMD0TIMEOUT           SDMMC_CMD0TIMEOUT
+#define  SD_SDIO_SEND_IF_COND       SD_SDMMC_SEND_IF_COND
 /* alias CMSIS for compatibilities */
 #define  SDIO_IRQn                  SDMMC1_IRQn
 #define  SDIO_IRQHandler            SDMMC1_IRQHandler
@@ -3589,6 +3811,13 @@
 #define __HAL_USART_GETCLOCKSOURCE      USART_GETCLOCKSOURCE
 #define __USART_GETCLOCKSOURCE          USART_GETCLOCKSOURCE
 
+#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7)
+#define USART_OVERSAMPLING_16               0x00000000U
+#define USART_OVERSAMPLING_8                USART_CR1_OVER8
+
+#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \
+                                             ((__SAMPLING__) == USART_OVERSAMPLING_8))
+#endif /* STM32F0 || STM32F3 || STM32F7 */
 /**
   * @}
   */
@@ -3751,13 +3980,23 @@
 /** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose
   * @{
   */
-#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7)
+#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7)
 #define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE
 #endif /* STM32L4 || STM32F4 || STM32F7 */
 /**
   * @}
   */
 
+/** @defgroup HAL_Generic_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#if defined (STM32F7)
+#define ART_ACCLERATOR_ENABLE ART_ACCELERATOR_ENABLE
+#endif /* STM32F7 */
+/**
+  * @}
+  */
+
 /** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
   * @{
   */
@@ -3772,5 +4011,4 @@
 
 #endif /* STM32_HAL_LEGACY */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
 

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h

@@ -7,13 +7,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */ 
@@ -295,4 +294,4 @@ void HAL_DisableMemorySwappingBank(void);
 
 #endif /* __STM32F4xx_HAL_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -28,6 +27,9 @@
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f4xx_hal_def.h"
 
+/* Include low level driver */
+#include "stm32f4xx_ll_adc.h"
+
 /** @addtogroup STM32F4xx_HAL_Driver
   * @{
   */
@@ -894,4 +896,3 @@ uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
 #endif /*__STM32F4xx_ADC_H */
 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -304,17 +303,18 @@ HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_
   */
 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
     defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \
-    defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
-    defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
+    defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \
+    defined(STM32F412Cx)
 #define IS_ADC_CHANNEL(CHANNEL) ((CHANNEL) <= ADC_CHANNEL_18)
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE ||
-          STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
-    defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE ||
+          STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+      
+#if defined(STM32F411xE) || defined(STM32F413xx) || defined(STM32F423xx) || defined(STM32F427xx) || \
+    defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || \
+    defined(STM32F469xx) || defined(STM32F479xx)
 #define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) <= ADC_CHANNEL_18)  || \
                                  ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR))
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* STM32F411xE || STM32F413xx || STM32F423xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
 
 #define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT)                 || \
                            ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT)   || \
@@ -405,4 +405,3 @@ HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_
 #endif /*__STM32F4xx_ADC_EX_H */
 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h

@@ -6,14 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */ 
 
@@ -407,4 +405,3 @@ void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
 #endif /* __STM32F4xx_HAL_CORTEX_H */
  
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h

@@ -7,13 +7,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -107,7 +106,14 @@ typedef enum
                                     }while (0U)
 #endif /* USE_RTOS */
 
-#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
+  #ifndef __weak
+    #define __weak  __attribute__((weak))
+  #endif
+  #ifndef __packed
+    #define __packed  __attribute__((packed))
+  #endif
+#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
   #ifndef __weak
     #define __weak   __attribute__((weak))
   #endif /* __weak */
@@ -118,7 +124,14 @@ typedef enum
 
 
 /* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
-#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
+  #ifndef __ALIGN_BEGIN
+    #define __ALIGN_BEGIN
+  #endif
+  #ifndef __ALIGN_END
+    #define __ALIGN_END      __attribute__ ((aligned (4)))
+  #endif
+#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
   #ifndef __ALIGN_END
 #define __ALIGN_END    __attribute__ ((aligned (4)))
   #endif /* __ALIGN_END */
@@ -130,7 +143,7 @@ typedef enum
     #define __ALIGN_END
   #endif /* __ALIGN_END */
   #ifndef __ALIGN_BEGIN      
-    #if defined   (__CC_ARM)      /* ARM Compiler */
+    #if defined   (__CC_ARM)      /* ARM Compiler V5*/
 #define __ALIGN_BEGIN    __align(4)
     #elif defined (__ICCARM__)    /* IAR Compiler */
       #define __ALIGN_BEGIN 
@@ -142,9 +155,9 @@ typedef enum
 /** 
   * @brief  __RAM_FUNC definition
   */ 
-#if defined ( __CC_ARM   )
-/* ARM Compiler
-   ------------
+#if defined ( __CC_ARM   ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
+/* ARM Compiler V4/V5 and V6
+   --------------------------
    RAM functions are defined using the toolchain options. 
    Functions that are executed in RAM should reside in a separate source module.
    Using the 'Options for File' dialog you can simply change the 'Code / Const' 
@@ -174,9 +187,9 @@ typedef enum
 /** 
   * @brief  __NOINLINE definition
   */ 
-#if defined ( __CC_ARM   ) || defined   (  __GNUC__  )
-/* ARM & GNUCompiler 
-   ---------------- 
+#if defined ( __CC_ARM   ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined   (  __GNUC__  )
+/* ARM V4/V5 and V6 & GNU Compiler
+   -------------------------------
 */
 #define __NOINLINE __attribute__ ( (noinline) )
 
@@ -194,4 +207,4 @@ typedef enum
 
 #endif /* ___STM32F4xx_HAL_DEF */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */ 
@@ -801,4 +800,3 @@ uint32_t             HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
 
 #endif /* __STM32F4xx_HAL_DMA_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -101,4 +100,3 @@ HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Addre
 
 #endif /*__STM32F4xx_HAL_DMA_EX_H*/
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.Clause
   *
   ******************************************************************************
   */
@@ -243,19 +242,19 @@ typedef struct
 /** @defgroup EXTI_Private_Macros EXTI Private Macros
   * @{
   */
-#define IS_EXTI_LINE(__LINE__)          ((((__LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
-                                        ((((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG)              || \
-                                         (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO))               && \
-                                         (((__LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
+#define IS_EXTI_LINE(__EXTI_LINE__)          ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
+                                             ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG)              || \
+                                              (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO))               && \
+                                              (((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
 
-#define IS_EXTI_MODE(__LINE__)          ((((__LINE__) & EXTI_MODE_MASK) != 0x00u) && \
-                                         (((__LINE__) & ~EXTI_MODE_MASK) == 0x00u))
+#define IS_EXTI_MODE(__EXTI_LINE__)          ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \
+                                              (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u))
 
-#define IS_EXTI_TRIGGER(__LINE__)       (((__LINE__)  & ~EXTI_TRIGGER_MASK) == 0x00u)
+#define IS_EXTI_TRIGGER(__EXTI_LINE__)       (((__EXTI_LINE__)  & ~EXTI_TRIGGER_MASK) == 0x00u)
 
-#define IS_EXTI_PENDING_EDGE(__LINE__)  ((__LINE__) == EXTI_TRIGGER_RISING_FALLING)
+#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__)  ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING)
 
-#define IS_EXTI_CONFIG_LINE(__LINE__)   (((__LINE__) & EXTI_CONFIG) != 0x00u)
+#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__)   (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
 
 #if !defined (GPIOD)
 #define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
@@ -365,4 +364,3 @@ void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
 
 #endif /* STM32f4xx_HAL_EXTI_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h

@@ -6,14 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */ 
 
@@ -425,4 +423,3 @@ HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
 
 #endif /* __STM32F4xx_HAL_FLASH_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h

@@ -6,14 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */ 
 
@@ -1063,4 +1061,3 @@ void FLASH_FlushCaches(void);
 
 #endif /* __STM32F4xx_HAL_FLASH_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h

@@ -6,14 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */ 
 
@@ -76,4 +74,3 @@ __RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void);
 
 #endif /* __STM32F4xx_FLASH_RAMFUNC_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */ 
@@ -107,30 +106,30 @@ typedef enum
   */
 
 /** @defgroup GPIO_mode_define GPIO mode define
-  * @brief GPIO Configuration Mode 
-  *        Elements values convention: 0xX0yz00YZ
-  *           - X  : GPIO mode or EXTI Mode
-  *           - y  : External IT or Event trigger detection 
-  *           - z  : IO configuration on External IT or Event
-  *           - Y  : Output type (Push Pull or Open Drain)
-  *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)
+  * @brief GPIO Configuration Mode
+  *        Elements values convention: 0x00WX00YZ
+  *           - W  : EXTI trigger detection on 3 bits
+  *           - X  : EXTI mode (IT or Event) on 2 bits
+  *           - Y  : Output type (Push Pull or Open Drain) on 1 bit
+  *           - Z  : GPIO mode (Input, Output, Alternate or Analog) on 2 bits
   * @{
   */ 
-#define  GPIO_MODE_INPUT                        0x00000000U   /*!< Input Floating Mode                   */
-#define  GPIO_MODE_OUTPUT_PP                    0x00000001U   /*!< Output Push Pull Mode                 */
-#define  GPIO_MODE_OUTPUT_OD                    0x00000011U   /*!< Output Open Drain Mode                */
-#define  GPIO_MODE_AF_PP                        0x00000002U   /*!< Alternate Function Push Pull Mode     */
-#define  GPIO_MODE_AF_OD                        0x00000012U   /*!< Alternate Function Open Drain Mode    */
+#define  GPIO_MODE_INPUT                        MODE_INPUT                                                  /*!< Input Floating Mode                   */
+#define  GPIO_MODE_OUTPUT_PP                    (MODE_OUTPUT | OUTPUT_PP)                                   /*!< Output Push Pull Mode                 */
+#define  GPIO_MODE_OUTPUT_OD                    (MODE_OUTPUT | OUTPUT_OD)                                   /*!< Output Open Drain Mode                */
+#define  GPIO_MODE_AF_PP                        (MODE_AF | OUTPUT_PP)                                       /*!< Alternate Function Push Pull Mode     */
+#define  GPIO_MODE_AF_OD                        (MODE_AF | OUTPUT_OD)                                       /*!< Alternate Function Open Drain Mode    */
 
-#define  GPIO_MODE_ANALOG                       0x00000003U   /*!< Analog Mode  */
+#define  GPIO_MODE_ANALOG                       MODE_ANALOG                                                 /*!< Analog Mode  */
     
-#define  GPIO_MODE_IT_RISING                    0x10110000U   /*!< External Interrupt Mode with Rising edge trigger detection          */
-#define  GPIO_MODE_IT_FALLING                   0x10210000U   /*!< External Interrupt Mode with Falling edge trigger detection         */
-#define  GPIO_MODE_IT_RISING_FALLING            0x10310000U   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
+#define  GPIO_MODE_IT_RISING                    (MODE_INPUT | EXTI_IT | TRIGGER_RISING)                     /*!< External Interrupt Mode with Rising edge trigger detection          */
+#define  GPIO_MODE_IT_FALLING                   (MODE_INPUT | EXTI_IT | TRIGGER_FALLING)                    /*!< External Interrupt Mode with Falling edge trigger detection         */
+#define  GPIO_MODE_IT_RISING_FALLING            (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
  
-#define  GPIO_MODE_EVT_RISING                   0x10120000U   /*!< External Event Mode with Rising edge trigger detection               */
-#define  GPIO_MODE_EVT_FALLING                  0x10220000U   /*!< External Event Mode with Falling edge trigger detection              */
-#define  GPIO_MODE_EVT_RISING_FALLING           0x10320000U   /*!< External Event Mode with Rising/Falling edge trigger detection       */
+#define  GPIO_MODE_EVT_RISING                   (MODE_INPUT | EXTI_EVT | TRIGGER_RISING)                     /*!< External Event Mode with Rising edge trigger detection             */
+#define  GPIO_MODE_EVT_FALLING                  (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING)                    /*!< External Event Mode with Falling edge trigger detection            */
+#define  GPIO_MODE_EVT_RISING_FALLING           (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING)   /*!< External Event Mode with Rising/Falling edge trigger detection     */
+
 /**
   * @}
   */
@@ -252,6 +251,24 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
 /** @defgroup GPIO_Private_Constants GPIO Private Constants
   * @{
   */
+#define GPIO_MODE_Pos                           0U
+#define GPIO_MODE                               (0x3UL << GPIO_MODE_Pos)
+#define MODE_INPUT                              (0x0UL << GPIO_MODE_Pos)
+#define MODE_OUTPUT                             (0x1UL << GPIO_MODE_Pos)
+#define MODE_AF                                 (0x2UL << GPIO_MODE_Pos)
+#define MODE_ANALOG                             (0x3UL << GPIO_MODE_Pos)
+#define OUTPUT_TYPE_Pos                         4U
+#define OUTPUT_TYPE                             (0x1UL << OUTPUT_TYPE_Pos)
+#define OUTPUT_PP                               (0x0UL << OUTPUT_TYPE_Pos)
+#define OUTPUT_OD                               (0x1UL << OUTPUT_TYPE_Pos)
+#define EXTI_MODE_Pos                           16U
+#define EXTI_MODE                               (0x3UL << EXTI_MODE_Pos)
+#define EXTI_IT                                 (0x1UL << EXTI_MODE_Pos)
+#define EXTI_EVT                                (0x2UL << EXTI_MODE_Pos)
+#define TRIGGER_MODE_Pos                         20U
+#define TRIGGER_MODE                            (0x7UL << TRIGGER_MODE_Pos)
+#define TRIGGER_RISING                          (0x1UL << TRIGGER_MODE_Pos)
+#define TRIGGER_FALLING                         (0x2UL << TRIGGER_MODE_Pos)
 
 /**
   * @}
@@ -306,4 +323,3 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
 
 #endif /* __STM32F4xx_HAL_GPIO_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */ 
@@ -1442,21 +1441,21 @@
 /*----------------------------------------------------------------------------*/
 
 /*---------------------------------------- STM32F401xx------------------------*/
-#if defined(STM32F401xC) || defined(STM32F401xE) 
+#if defined(STM32F401xC) || defined(STM32F401xE)
 #define IS_GPIO_AF(AF)   (((AF) == GPIO_AF0_RTC_50Hz)   || ((AF) == GPIO_AF12_SDIO)      || \
                           ((AF) == GPIO_AF0_MCO)        || ((AF) == GPIO_AF0_TAMPER)     || \
                           ((AF) == GPIO_AF0_SWJ)        || ((AF) == GPIO_AF0_TRACE)      || \
                           ((AF) == GPIO_AF1_TIM1)       || ((AF) == GPIO_AF1_TIM2)       || \
                           ((AF) == GPIO_AF2_TIM3)       || ((AF) == GPIO_AF2_TIM4)       || \
-                          ((AF) == GPIO_AF2_TIM5)       || ((AF) == GPIO_AF4_I2C1)       || \
-                          ((AF) == GPIO_AF4_I2C2)       || ((AF) == GPIO_AF4_I2C3)       || \
-                          ((AF) == GPIO_AF5_SPI1)       || ((AF) == GPIO_AF5_SPI2)       || \
-                          ((AF) == GPIO_AF6_SPI3)       || ((AF) == GPIO_AF5_SPI4)       || \
-                          ((AF) == GPIO_AF7_USART1)     || ((AF) == GPIO_AF7_USART2)     || \
-                          ((AF) == GPIO_AF8_USART6)     || ((AF) == GPIO_AF10_OTG_FS)    || \
+                          ((AF) == GPIO_AF2_TIM5)       || ((AF) == GPIO_AF3_TIM9)       || \
+                          ((AF) == GPIO_AF3_TIM10)      || ((AF) == GPIO_AF3_TIM11)      || \
+                          ((AF) == GPIO_AF4_I2C1)       || ((AF) == GPIO_AF4_I2C2)       || \
+                          ((AF) == GPIO_AF4_I2C3)       || ((AF) == GPIO_AF5_SPI1)       || \
+                          ((AF) == GPIO_AF5_SPI2)       || ((AF) == GPIO_AF5_SPI4)       || \
+                          ((AF) == GPIO_AF6_SPI3)       || ((AF) == GPIO_AF7_USART1)     || \
+                          ((AF) == GPIO_AF7_USART2)     || ((AF) == GPIO_AF8_USART6)     || \
                           ((AF) == GPIO_AF9_I2C2)       || ((AF) == GPIO_AF9_I2C3)       || \
-                          ((AF) == GPIO_AF15_EVENTOUT))
-
+                          ((AF) == GPIO_AF10_OTG_FS)    || ((AF) == GPIO_AF15_EVENTOUT))
 #endif /* STM32F401xC || STM32F401xE */
 /*----------------------------------------------------------------------------*/
 /*---------------------------------------- STM32F410xx------------------------*/
@@ -1589,4 +1588,3 @@
 
 #endif /* __STM32F4xx_HAL_GPIO_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -85,7 +84,7 @@ typedef struct
   *             01 : Abort (Abort user request on going)
   *             10 : Timeout
   *             11 : Error
-  *          b5     Peripheral initilisation status
+  *          b5     Peripheral initialization status
   *             0  : Reset (Peripheral not initialized)
   *             1  : Init done (Peripheral initialized and ready to use. HAL I2C Init function called)
   *          b4     (not used)
@@ -740,4 +739,3 @@ uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
 
 #endif /* __STM32F4xx_HAL_I2C_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -114,4 +113,3 @@ HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_
 #endif /* __STM32F4xx_HAL_I2C_EX_H */
 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h

@@ -6,14 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */ 
 
@@ -427,5 +425,3 @@ void HAL_PWR_DisableSEVOnPend(void);
 
 
 #endif /* __STM32F4xx_HAL_PWR_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h

@@ -6,14 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */ 
 
@@ -340,5 +338,3 @@ HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t
 
 
 #endif /* __STM32F4xx_HAL_PWR_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h

@@ -6,14 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */
 
@@ -976,11 +974,10 @@ typedef struct
   *         a Power On Reset (POR).
   * @param  __RTCCLKSource__ specifies the RTC clock source.
   *         This parameter can be one of the following values:
-               @arg @ref RCC_RTCCLKSOURCE_NO_CLK: No clock selected as RTC clock.
-  *            @arg @ref RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
-  *            @arg @ref RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
-  *            @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX: HSE clock divided by x selected
-  *                                                 as RTC clock, where x:[2,31]
+  *            @arg @ref RCC_RTCCLKSOURCE_NO_CLK : No clock selected as RTC clock.
+  *            @arg @ref RCC_RTCCLKSOURCE_LSE : LSE selected as RTC clock.
+  *            @arg @ref RCC_RTCCLKSOURCE_LSI : LSI selected as RTC clock.
+  *            @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER()
   * @note   If the LSE or LSI is used as RTC clock source, the RTC continues to
   *         work in STOP and STANDBY modes, and can be used as wake-up source.
   *         However, when the HSE clock is used as RTC clock source, the RTC
@@ -1007,8 +1004,7 @@ typedef struct
 /**
   * @brief   Get the RTC and HSE clock divider (RTCPRE).
   * @retval Returned value can be one of the following values:
-  *            @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX: HSE clock divided by x selected
-  *                                                 as RTC clock, where x:[2,31]
+ *            @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER()
   */
 #define  __HAL_RCC_GET_RTC_HSE_PRESCALER() (READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) | RCC_BDCR_RTCSEL)
 
@@ -1461,4 +1457,3 @@ void HAL_RCC_CSSCallback(void);
 
 #endif /* __STM32F4xx_HAL_RCC_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h

@@ -6,14 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */ 
 
@@ -103,7 +101,7 @@ typedef struct
   */
 typedef struct
 {
-  uint32_t PLLSAIM;    /*!< Spcifies division factor for PLL VCO input clock.
+  uint32_t PLLSAIM;    /*!< Specifies division factor for PLL VCO input clock.
                             This parameter must be a number between Min_Data = 2 and Max_Data = 63       */
 
   uint32_t PLLSAIN;    /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
@@ -4969,7 +4967,6 @@ typedef struct
                                       tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\
                                       UNUSED(tmpreg); \
                                       } while(0U)
-#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_USART3_CLK_ENABLE() do { \
                                       __IO uint32_t tmpreg = 0x00U; \
                                       SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
@@ -4977,7 +4974,6 @@ typedef struct
                                       tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
                                       UNUSED(tmpreg); \
                                       } while(0U)
-#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */
 
 #if defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_UART4_CLK_ENABLE()  do { \
@@ -5098,9 +5094,7 @@ typedef struct
 #endif /* STM32F413xx || STM32F423xx */
 #define __HAL_RCC_RTCAPB_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN))                                       
 #define __HAL_RCC_SPI3_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
-#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_USART3_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
-#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */
 #if defined(STM32F413xx) || defined(STM32F423xx)   
 #define __HAL_RCC_UART4_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
 #define __HAL_RCC_UART5_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
@@ -5140,9 +5134,7 @@ typedef struct
 #endif /* STM32F413xx || STM32F423xx */                                            
 #define __HAL_RCC_RTCAPB_IS_CLK_ENABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET)                                    
 #define __HAL_RCC_SPI3_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
-#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_USART3_IS_CLK_ENABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
-#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx | STM32F423xx */
 #if defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_UART4_IS_CLK_ENABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) 
 #define __HAL_RCC_UART5_IS_CLK_ENABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) 
@@ -5171,9 +5163,7 @@ typedef struct
 #endif /* STM32F413xx || STM32F423xx */                                         
 #define __HAL_RCC_RTCAPB_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET)                                        
 #define __HAL_RCC_SPI3_IS_CLK_DISABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
-#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_USART3_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
-#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx | STM32F423xx */
 #if defined(STM32F413xx) || defined(STM32F423xx)                                           
 #define __HAL_RCC_UART4_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) 
 #define __HAL_RCC_UART5_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) 
@@ -5445,9 +5435,7 @@ typedef struct
 #define __HAL_RCC_LPTIM1_FORCE_RESET()   (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST)) 
 #endif /* STM32F413xx || STM32F423xx */                                        
 #define __HAL_RCC_SPI3_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))                                        
-#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_USART3_FORCE_RESET()   (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
-#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */
 #if defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_UART4_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
 #define __HAL_RCC_UART5_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))                                        
@@ -5475,9 +5463,7 @@ typedef struct
 #define __HAL_RCC_LPTIM1_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST))
 #endif /* STM32F413xx || STM32F423xx */                                        
 #define __HAL_RCC_SPI3_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
-#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_USART3_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
-#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */
 #if defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_UART4_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
 #define __HAL_RCC_UART5_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
@@ -5633,9 +5619,7 @@ typedef struct
 #endif /* STM32F413xx || STM32F423xx */                                        
 #define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE()  (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN))
 #define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))                                       
-#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_USART3_CLK_SLEEP_ENABLE()  (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
-#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */
 #if defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_UART4_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
 #define __HAL_RCC_UART5_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
@@ -5664,9 +5648,7 @@ typedef struct
 #endif /* STM32F413xx || STM32F423xx */                                        
 #define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN))
 #define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))                                        
-#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
-#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */
 #if defined(STM32F413xx) || defined(STM32F423xx)
 #define __HAL_RCC_UART4_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
 #define __HAL_RCC_UART5_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
@@ -6384,7 +6366,7 @@ typedef struct
   * @param  __DFSDM1_CLKSOURCE__ specifies the DFSDM1 clock source.
   *         This parameter can be one of the following values:
   *            @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. 
-  *            @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernal clock.
+  *            @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernel clock.
   * @retval None
   */
 #define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__)  MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM1_CLKSOURCE__))
@@ -6392,7 +6374,7 @@ typedef struct
 /** @brief  Macro to get the DFSDM1 clock source.
   * @retval The clock source can be one of the following values:
   *            @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. 
-  *            @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernal clock.
+  *            @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernel clock.
   */
 #define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL)))
 
@@ -6420,7 +6402,7 @@ typedef struct
   * @param  __DFSDM2_CLKSOURCE__ specifies the DFSDM1 clock source.
   *         This parameter can be one of the following values:
   *            @arg RCC_DFSDM2CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. 
-  *            @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernal clock.
+  *            @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernel clock.
   * @retval None
   */
 #define __HAL_RCC_DFSDM2_CONFIG(__DFSDM2_CLKSOURCE__)  MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM2_CLKSOURCE__))
@@ -6428,7 +6410,7 @@ typedef struct
 /** @brief  Macro to get the DFSDM2 clock source.
   * @retval The clock source can be one of the following values:
   *            @arg RCC_DFSDM2CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. 
-  *            @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernal clock.
+  *            @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernel clock.
   */
 #define __HAL_RCC_GET_DFSDM2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL)))
 
@@ -6867,16 +6849,8 @@ HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void);
 /** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters
   * @{
   */
-#if defined(STM32F411xE)
-#define IS_RCC_PLLN_VALUE(VALUE) ((192U <= (VALUE)) && ((VALUE) <= 432U))
-#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192U <= (VALUE)) && ((VALUE) <= 432U))      
-#else /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||
-         STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410Tx || STM32F410Cx || 
-         STM32F410Rx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Cx || STM32F412Rx || 
-         STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */
 #define IS_RCC_PLLN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U))
 #define IS_RCC_PLLI2SN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U))
-#endif  /* STM32F411xE */    
       
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
 #define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000007FU))
@@ -7135,4 +7109,3 @@ HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void);
 
 #endif /* __STM32F4xx_HAL_RCC_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h

@@ -1,874 +1,915 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_rtc.h
-  * @author  MCD Application Team
-  * @brief   Header file of RTC HAL module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_RTC_H
-#define __STM32F4xx_HAL_RTC_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal_def.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup RTC
-  * @{
-  */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup RTC_Exported_Types RTC Exported Types
-  * @{
-  */
-
-/**
-  * @brief  HAL State structures definition
-  */
-typedef enum
-{
-  HAL_RTC_STATE_RESET             = 0x00U,  /*!< RTC not yet initialized or disabled */
-  HAL_RTC_STATE_READY             = 0x01U,  /*!< RTC initialized and ready for use   */
-  HAL_RTC_STATE_BUSY              = 0x02U,  /*!< RTC process is ongoing              */
-  HAL_RTC_STATE_TIMEOUT           = 0x03U,  /*!< RTC timeout state                   */
-  HAL_RTC_STATE_ERROR             = 0x04U   /*!< RTC error state                     */
-}HAL_RTCStateTypeDef;
-
-/**
-  * @brief  RTC Configuration Structure definition
-  */
-typedef struct
-{
-  uint32_t HourFormat;      /*!< Specifies the RTC Hour Format.
-                                 This parameter can be a value of @ref RTC_Hour_Formats */
-
-  uint32_t AsynchPrediv;    /*!< Specifies the RTC Asynchronous Predivider value.
-                                 This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
-
-  uint32_t SynchPrediv;     /*!< Specifies the RTC Synchronous Predivider value.
-                                 This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFFU */
-
-  uint32_t OutPut;          /*!< Specifies which signal will be routed to the RTC output.
-                                 This parameter can be a value of @ref RTC_Output_selection_Definitions */
-
-  uint32_t OutPutPolarity;  /*!< Specifies the polarity of the output signal.
-                                 This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
-
-  uint32_t OutPutType;      /*!< Specifies the RTC Output Pin mode.
-                                 This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
-}RTC_InitTypeDef;
-
-/**
-  * @brief  RTC Time structure definition
-  */
-typedef struct
-{
-  uint8_t Hours;            /*!< Specifies the RTC Time Hour.
-                                 This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
-                                 This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected  */
-
-  uint8_t Minutes;          /*!< Specifies the RTC Time Minutes.
-                                 This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
-
-  uint8_t Seconds;          /*!< Specifies the RTC Time Seconds.
-                                 This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
-
-  uint8_t TimeFormat;       /*!< Specifies the RTC AM/PM Time.
-                                 This parameter can be a value of @ref RTC_AM_PM_Definitions */
-
-  uint32_t SubSeconds;     /*!< Specifies the RTC_SSR RTC Sub Second register content.
-                                 This parameter corresponds to a time unit range between [0-1] Second
-                                 with [1 Sec / SecondFraction +1] granularity */
-
-  uint32_t SecondFraction;  /*!< Specifies the range or granularity of Sub Second register content
-                                 corresponding to Synchronous pre-scaler factor value (PREDIV_S)
-                                 This parameter corresponds to a time unit range between [0-1] Second
-                                 with [1 Sec / SecondFraction +1] granularity.
-                                 This field will be used only by HAL_RTC_GetTime function */
-
-  uint32_t DayLightSaving;  /*!< Specifies DayLight Save Operation.
-                                 This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
-
-  uint32_t StoreOperation;  /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
-                                 in CR register to store the operation.
-                                 This parameter can be a value of @ref RTC_StoreOperation_Definitions */
-}RTC_TimeTypeDef;
-
-/**
-  * @brief  RTC Date structure definition
-  */
-typedef struct
-{
-  uint8_t WeekDay;  /*!< Specifies the RTC Date WeekDay.
-                         This parameter can be a value of @ref RTC_WeekDay_Definitions */
-
-  uint8_t Month;    /*!< Specifies the RTC Date Month (in BCD format).
-                         This parameter can be a value of @ref RTC_Month_Date_Definitions */
-
-  uint8_t Date;     /*!< Specifies the RTC Date.
-                         This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
-
-  uint8_t Year;     /*!< Specifies the RTC Date Year.
-                         This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
-
-}RTC_DateTypeDef;
-
-/**
-  * @brief  RTC Alarm structure definition
-  */
-typedef struct
-{
-  RTC_TimeTypeDef AlarmTime;     /*!< Specifies the RTC Alarm Time members */
-
-  uint32_t AlarmMask;            /*!< Specifies the RTC Alarm Masks.
-                                      This parameter can be a value of @ref RTC_AlarmMask_Definitions */
-
-  uint32_t AlarmSubSecondMask;   /*!< Specifies the RTC Alarm SubSeconds Masks.
-                                      This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
-
-  uint32_t AlarmDateWeekDaySel;  /*!< Specifies the RTC Alarm is on Date or WeekDay.
-                                     This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
-
-  uint8_t AlarmDateWeekDay;      /*!< Specifies the RTC Alarm Date/WeekDay.
-                                      If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
-                                      If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
-
-  uint32_t Alarm;                /*!< Specifies the alarm .
-                                      This parameter can be a value of @ref RTC_Alarms_Definitions */
-}RTC_AlarmTypeDef;
-
-/**
-  * @brief  RTC Handle Structure definition
-  */
-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-typedef struct __RTC_HandleTypeDef
-#else
-typedef struct
-#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */
-{
-  RTC_TypeDef                 *Instance;  /*!< Register base address    */
-
-  RTC_InitTypeDef             Init;       /*!< RTC required parameters  */
-
-  HAL_LockTypeDef             Lock;       /*!< RTC locking object       */
-
-  __IO HAL_RTCStateTypeDef    State;      /*!< Time communication state */
-
-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-  void  (* AlarmAEventCallback)      ( struct __RTC_HandleTypeDef * hrtc);  /*!< RTC Alarm A Event callback         */
-
-  void  (* AlarmBEventCallback)      ( struct __RTC_HandleTypeDef * hrtc);  /*!< RTC Alarm B Event callback         */
-
-  void  (* TimeStampEventCallback)   ( struct __RTC_HandleTypeDef * hrtc);  /*!< RTC TimeStamp Event callback       */
-
-  void  (* WakeUpTimerEventCallback) ( struct __RTC_HandleTypeDef * hrtc);  /*!< RTC WakeUpTimer Event callback     */
-
-  void  (* Tamper1EventCallback)     ( struct __RTC_HandleTypeDef * hrtc);  /*!< RTC Tamper 1 Event callback        */
-
-  void  (* Tamper2EventCallback)     ( struct __RTC_HandleTypeDef * hrtc);  /*!< RTC Tamper 2 Event callback        */
-
-  void  (* MspInitCallback)          ( struct __RTC_HandleTypeDef * hrtc);  /*!< RTC Msp Init callback              */
-
-  void  (* MspDeInitCallback)        ( struct __RTC_HandleTypeDef * hrtc);  /*!< RTC Msp DeInit callback            */
-
-#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */
-
-}RTC_HandleTypeDef;
-
-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-/**
-  * @brief  HAL RTC Callback ID enumeration definition
-  */
-typedef enum
-{
-  HAL_RTC_ALARM_A_EVENT_CB_ID           = 0x00u,    /*!< RTC Alarm A Event Callback ID       */
-  HAL_RTC_ALARM_B_EVENT_CB_ID           = 0x01u,    /*!< RTC Alarm B Event Callback ID       */
-  HAL_RTC_TIMESTAMP_EVENT_CB_ID         = 0x02u,    /*!< RTC TimeStamp Event Callback ID     */
-  HAL_RTC_WAKEUPTIMER_EVENT_CB_ID       = 0x03u,    /*!< RTC Wake-Up Timer Event Callback ID */
-  HAL_RTC_TAMPER1_EVENT_CB_ID           = 0x04u,    /*!< RTC Tamper 1 Callback ID            */
-  HAL_RTC_TAMPER2_EVENT_CB_ID           = 0x05u,    /*!< RTC Tamper 2 Callback ID            */
-  HAL_RTC_MSPINIT_CB_ID                 = 0x0Eu,    /*!< RTC Msp Init callback ID            */
-  HAL_RTC_MSPDEINIT_CB_ID               = 0x0Fu     /*!< RTC Msp DeInit callback ID          */
-}HAL_RTC_CallbackIDTypeDef;
-
-/**
-  * @brief  HAL RTC Callback pointer definition
-  */
-typedef  void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef * hrtc); /*!< pointer to an RTC callback function */
-#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
-
-/**
-  * @}
-  */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup RTC_Exported_Constants RTC Exported Constants
-  * @{
-  */
-
-/** @defgroup RTC_Hour_Formats RTC Hour Formats
-  * @{
-  */
-#define RTC_HOURFORMAT_24              0x00000000U
-#define RTC_HOURFORMAT_12              0x00000040U
-/**
-  * @}
-  */
-
-/** @defgroup RTC_Output_selection_Definitions RTC Output Selection Definitions
-  * @{
-  */
-#define RTC_OUTPUT_DISABLE             0x00000000U
-#define RTC_OUTPUT_ALARMA              0x00200000U
-#define RTC_OUTPUT_ALARMB              0x00400000U
-#define RTC_OUTPUT_WAKEUP              0x00600000U
-/**
-  * @}
-  */
-
-/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions
-  * @{
-  */
-#define RTC_OUTPUT_POLARITY_HIGH       0x00000000U
-#define RTC_OUTPUT_POLARITY_LOW        0x00100000U
-/**
-  * @}
-  */
-
-/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT
-  * @{
-  */
-#define RTC_OUTPUT_TYPE_OPENDRAIN      0x00000000U
-#define RTC_OUTPUT_TYPE_PUSHPULL       0x00040000U
-/**
-  * @}
-  */
-
-/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions
-  * @{
-  */
-#define RTC_HOURFORMAT12_AM            ((uint8_t)0x00)
-#define RTC_HOURFORMAT12_PM            ((uint8_t)0x40)
-/**
-  * @}
-  */
-
-/** @defgroup RTC_DayLightSaving_Definitions RTC DayLight Saving Definitions
-  * @{
-  */
-#define RTC_DAYLIGHTSAVING_SUB1H       0x00020000U
-#define RTC_DAYLIGHTSAVING_ADD1H       0x00010000U
-#define RTC_DAYLIGHTSAVING_NONE        0x00000000U
-/**
-  * @}
-  */
-
-/** @defgroup RTC_StoreOperation_Definitions RTC Store Operation Definitions
-  * @{
-  */
-#define RTC_STOREOPERATION_RESET        0x00000000U
-#define RTC_STOREOPERATION_SET          0x00040000U
-/**
-  * @}
-  */
-
-/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions
-  * @{
-  */
-#define RTC_FORMAT_BIN                      0x00000000U
-#define RTC_FORMAT_BCD                      0x00000001U
-/**
-  * @}
-  */
-
-/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions
-  * @{
-  */
-/* Coded in BCD format */
-#define RTC_MONTH_JANUARY              ((uint8_t)0x01)
-#define RTC_MONTH_FEBRUARY             ((uint8_t)0x02)
-#define RTC_MONTH_MARCH                ((uint8_t)0x03)
-#define RTC_MONTH_APRIL                ((uint8_t)0x04)
-#define RTC_MONTH_MAY                  ((uint8_t)0x05)
-#define RTC_MONTH_JUNE                 ((uint8_t)0x06)
-#define RTC_MONTH_JULY                 ((uint8_t)0x07)
-#define RTC_MONTH_AUGUST               ((uint8_t)0x08)
-#define RTC_MONTH_SEPTEMBER            ((uint8_t)0x09)
-#define RTC_MONTH_OCTOBER              ((uint8_t)0x10)
-#define RTC_MONTH_NOVEMBER             ((uint8_t)0x11)
-#define RTC_MONTH_DECEMBER             ((uint8_t)0x12)
-/**
-  * @}
-  */
-
-/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
-  * @{
-  */
-#define RTC_WEEKDAY_MONDAY             ((uint8_t)0x01)
-#define RTC_WEEKDAY_TUESDAY            ((uint8_t)0x02)
-#define RTC_WEEKDAY_WEDNESDAY          ((uint8_t)0x03)
-#define RTC_WEEKDAY_THURSDAY           ((uint8_t)0x04)
-#define RTC_WEEKDAY_FRIDAY             ((uint8_t)0x05)
-#define RTC_WEEKDAY_SATURDAY           ((uint8_t)0x06)
-#define RTC_WEEKDAY_SUNDAY             ((uint8_t)0x07)
-/**
-  * @}
-  */
-
-/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC Alarm Date WeekDay Definitions
-  * @{
-  */
-#define RTC_ALARMDATEWEEKDAYSEL_DATE      0x00000000U
-#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY   0x40000000U
-/**
-  * @}
-  */
-
-/** @defgroup RTC_AlarmMask_Definitions RTC Alarm Mask Definitions
-  * @{
-  */
-#define RTC_ALARMMASK_NONE                0x00000000U
-#define RTC_ALARMMASK_DATEWEEKDAY         RTC_ALRMAR_MSK4
-#define RTC_ALARMMASK_HOURS               RTC_ALRMAR_MSK3
-#define RTC_ALARMMASK_MINUTES             RTC_ALRMAR_MSK2
-#define RTC_ALARMMASK_SECONDS             RTC_ALRMAR_MSK1
-#define RTC_ALARMMASK_ALL                 0x80808080U
-/**
-  * @}
-  */
-
-/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions
-  * @{
-  */
-#define RTC_ALARM_A                       RTC_CR_ALRAE
-#define RTC_ALARM_B                       RTC_CR_ALRBE
-/**
-  * @}
-  */
-
-/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions
-  * @{
-  */
-#define RTC_ALARMSUBSECONDMASK_ALL         0x00000000U  /*!< All Alarm SS fields are masked.
-                                                                        There is no comparison on sub seconds
-                                                                        for Alarm */
-#define RTC_ALARMSUBSECONDMASK_SS14_1      0x01000000U  /*!< SS[14:1] are don't care in Alarm
-                                                                        comparison. Only SS[0] is compared.    */
-#define RTC_ALARMSUBSECONDMASK_SS14_2      0x02000000U  /*!< SS[14:2] are don't care in Alarm
-                                                                        comparison. Only SS[1:0] are compared  */
-#define RTC_ALARMSUBSECONDMASK_SS14_3      0x03000000U  /*!< SS[14:3] are don't care in Alarm
-                                                                        comparison. Only SS[2:0] are compared  */
-#define RTC_ALARMSUBSECONDMASK_SS14_4      0x04000000U  /*!< SS[14:4] are don't care in Alarm
-                                                                        comparison. Only SS[3:0] are compared  */
-#define RTC_ALARMSUBSECONDMASK_SS14_5      0x05000000U  /*!< SS[14:5] are don't care in Alarm
-                                                                        comparison. Only SS[4:0] are compared  */
-#define RTC_ALARMSUBSECONDMASK_SS14_6      0x06000000U  /*!< SS[14:6] are don't care in Alarm
-                                                                        comparison. Only SS[5:0] are compared  */
-#define RTC_ALARMSUBSECONDMASK_SS14_7      0x07000000U  /*!< SS[14:7] are don't care in Alarm
-                                                                        comparison. Only SS[6:0] are compared  */
-#define RTC_ALARMSUBSECONDMASK_SS14_8      0x08000000U  /*!< SS[14:8] are don't care in Alarm
-                                                                        comparison. Only SS[7:0] are compared  */
-#define RTC_ALARMSUBSECONDMASK_SS14_9      0x09000000U  /*!< SS[14:9] are don't care in Alarm
-                                                                        comparison. Only SS[8:0] are compared  */
-#define RTC_ALARMSUBSECONDMASK_SS14_10     0x0A000000U  /*!< SS[14:10] are don't care in Alarm
-                                                                        comparison. Only SS[9:0] are compared  */
-#define RTC_ALARMSUBSECONDMASK_SS14_11     0x0B000000U  /*!< SS[14:11] are don't care in Alarm
-                                                                        comparison. Only SS[10:0] are compared */
-#define RTC_ALARMSUBSECONDMASK_SS14_12     0x0C000000U  /*!< SS[14:12] are don't care in Alarm
-                                                                        comparison.Only SS[11:0] are compared  */
-#define RTC_ALARMSUBSECONDMASK_SS14_13     0x0D000000U  /*!< SS[14:13] are don't care in Alarm
-                                                                        comparison. Only SS[12:0] are compared */
-#define RTC_ALARMSUBSECONDMASK_SS14        0x0E000000U  /*!< SS[14] is don't care in Alarm
-                                                                        comparison.Only SS[13:0] are compared  */
-#define RTC_ALARMSUBSECONDMASK_NONE        0x0F000000U  /*!< SS[14:0] are compared and must match
-                                                                        to activate alarm. */
-/**
-  * @}
-  */
-
-/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions
-  * @{
-  */
-#define RTC_IT_TS                         0x00008000U
-#define RTC_IT_WUT                        0x00004000U
-#define RTC_IT_ALRB                       0x00002000U
-#define RTC_IT_ALRA                       0x00001000U
-#define RTC_IT_TAMP                       0x00000004U /* Used only to Enable the Tamper Interrupt */
-#define RTC_IT_TAMP1                      0x00020000U
-#define RTC_IT_TAMP2                      0x00040000U
-/**
-  * @}
-  */
-
-/** @defgroup RTC_Flags_Definitions RTC Flags Definitions
-  * @{
-  */
-#define RTC_FLAG_RECALPF                  0x00010000U
-#define RTC_FLAG_TAMP2F                   0x00004000U
-#define RTC_FLAG_TAMP1F                   0x00002000U
-#define RTC_FLAG_TSOVF                    0x00001000U
-#define RTC_FLAG_TSF                      0x00000800U
-#define RTC_FLAG_WUTF                     0x00000400U
-#define RTC_FLAG_ALRBF                    0x00000200U
-#define RTC_FLAG_ALRAF                    0x00000100U
-#define RTC_FLAG_INITF                    0x00000040U
-#define RTC_FLAG_RSF                      0x00000020U
-#define RTC_FLAG_INITS                    0x00000010U
-#define RTC_FLAG_SHPF                     0x00000008U
-#define RTC_FLAG_WUTWF                    0x00000004U
-#define RTC_FLAG_ALRBWF                   0x00000002U
-#define RTC_FLAG_ALRAWF                   0x00000001U
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup RTC_Exported_Macros RTC Exported Macros
-  * @{
-  */
-
-/** @brief Reset RTC handle state
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do{\
-                                                      (__HANDLE__)->State = HAL_RTC_STATE_RESET;\
-                                                      (__HANDLE__)->MspInitCallback = NULL;\
-                                                      (__HANDLE__)->MspDeInitCallback = NULL;\
-                                                     }while(0u)
-#else
-#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
-#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
-
-/**
-  * @brief  Disable the write protection for RTC registers.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__)             \
-                        do{                                       \
-                            (__HANDLE__)->Instance->WPR = 0xCAU;  \
-                            (__HANDLE__)->Instance->WPR = 0x53U;  \
-                          } while(0U)
-
-/**
-  * @brief  Enable the write protection for RTC registers.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__)              \
-                        do{                                       \
-                            (__HANDLE__)->Instance->WPR = 0xFFU;  \
-                          } while(0U)
-
-/**
-  * @brief  Enable the RTC ALARMA peripheral.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__)                           ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
-
-/**
-  * @brief  Disable the RTC ALARMA peripheral.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__)                          ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
-
-/**
-  * @brief  Enable the RTC ALARMB peripheral.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__)                           ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
-
-/**
-  * @brief  Disable the RTC ALARMB peripheral.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__)                          ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
-
-/**
-  * @brief  Enable the RTC Alarm interrupt.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled.
-  *          This parameter can be any combination of the following values:
-  *             @arg RTC_IT_ALRA: Alarm A interrupt
-  *             @arg RTC_IT_ALRB: Alarm B interrupt
-  * @retval None
-  */
-#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__)          ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-
-/**
-  * @brief  Disable the RTC Alarm interrupt.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled.
-  *         This parameter can be any combination of the following values:
-  *            @arg RTC_IT_ALRA: Alarm A interrupt
-  *            @arg RTC_IT_ALRB: Alarm B interrupt
-  * @retval None
-  */
-#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__)         ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-
-/**
-  * @brief  Check whether the specified RTC Alarm interrupt has occurred or not.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC Alarm interrupt to check.
-  *         This parameter can be:
-  *            @arg RTC_IT_ALRA: Alarm A interrupt
-  *            @arg RTC_IT_ALRB: Alarm B interrupt
-  * @retval None
-  */
-#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__)           (((((__HANDLE__)->Instance->ISR)& ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
-
-/**
-  * @brief  Get the selected RTC Alarm's flag status.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __FLAG__ specifies the RTC Alarm Flag to check.
-  *         This parameter can be:
-  *            @arg RTC_FLAG_ALRAF
-  *            @arg RTC_FLAG_ALRBF
-  *            @arg RTC_FLAG_ALRAWF
-  *            @arg RTC_FLAG_ALRBWF
-  * @retval None
-  */
-#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__)                (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-
-/**
-  * @brief  Clear the RTC Alarm's pending flags.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __FLAG__ specifies the RTC Alarm Flag sources to be enabled or disabled.
-  *          This parameter can be:
-  *             @arg RTC_FLAG_ALRAF
-  *             @arg RTC_FLAG_ALRBF
-  * @retval None
-  */
-#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__)                  ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-
-
-/**
-  * @brief  Check whether the specified RTC Alarm interrupt has been enabled or not.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC Alarm interrupt sources to check.
-  *         This parameter can be:
-  *            @arg RTC_IT_ALRA: Alarm A interrupt
-  *            @arg RTC_IT_ALRB: Alarm B interrupt
-  * @retval None
-  */
-#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
-
-/**
-  * @brief  Enable interrupt on the RTC Alarm associated Exti line.
-  * @retval None
-  */
-#define __HAL_RTC_ALARM_EXTI_ENABLE_IT()            (EXTI->IMR |= RTC_EXTI_LINE_ALARM_EVENT)
-
-/**
-  * @brief  Disable interrupt on the RTC Alarm associated Exti line.
-  * @retval None
-  */
-#define __HAL_RTC_ALARM_EXTI_DISABLE_IT()           (EXTI->IMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
-
-/**
-  * @brief  Enable event on the RTC Alarm associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT()         (EXTI->EMR |= RTC_EXTI_LINE_ALARM_EVENT)
-
-/**
-  * @brief  Disable event on the RTC Alarm associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT()         (EXTI->EMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
-
-/**
-  * @brief  Enable falling edge trigger on the RTC Alarm associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_ALARM_EVENT)
-
-/**
-  * @brief  Disable falling edge trigger on the RTC Alarm associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
-
-/**
-  * @brief  Enable rising edge trigger on the RTC Alarm associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT)
-
-/**
-  * @brief  Disable rising edge trigger on the RTC Alarm associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
-
-/**
-  * @brief  Enable rising & falling edge trigger on the RTC Alarm associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE(); \
-                                                               __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE();\
-                                                             } while(0U)
-
-/**
-  * @brief  Disable rising & falling edge trigger on the RTC Alarm associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE();\
-                                                                __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE();\
-                                                              } while(0U)
-
-/**
-  * @brief Check whether the RTC Alarm associated Exti line interrupt flag is set or not.
-  * @retval Line Status.
-  */
-#define __HAL_RTC_ALARM_EXTI_GET_FLAG()              (EXTI->PR & RTC_EXTI_LINE_ALARM_EVENT)
-
-/**
-  * @brief Clear the RTC Alarm associated Exti line flag.
-  * @retval None.
-  */
-#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()            (EXTI->PR = RTC_EXTI_LINE_ALARM_EVENT)
-
-/**
-  * @brief Generate a Software interrupt on RTC Alarm associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()         (EXTI->SWIER |= RTC_EXTI_LINE_ALARM_EVENT)
-/**
-  * @}
-  */
-
-/* Include RTC HAL Extension module */
-#include "stm32f4xx_hal_rtc_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup RTC_Exported_Functions
-  * @{
-  */
-
-/** @addtogroup RTC_Exported_Functions_Group1
-  * @{
-  */
-/* Initialization and de-initialization functions  ****************************/
-HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
-void       HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
-void       HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
-
-/* Callbacks Register/UnRegister functions  ***********************************/
-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID);
-#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
-/**
-  * @}
-  */
-
-/** @addtogroup RTC_Exported_Functions_Group2
-  * @{
-  */
-/* RTC Time and Date functions ************************************************/
-HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
-HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
-HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
-HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
-/**
-  * @}
-  */
-
-/** @addtogroup RTC_Exported_Functions_Group3
-  * @{
-  */
-/* RTC Alarm functions ********************************************************/
-HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
-HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
-HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
-HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
-void                HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef   HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-void         HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
-/**
-  * @}
-  */
-
-/** @addtogroup RTC_Exported_Functions_Group4
-  * @{
-  */
-/* Peripheral Control functions ***********************************************/
-HAL_StatusTypeDef   HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);
-/**
-  * @}
-  */
-
-/** @addtogroup RTC_Exported_Functions_Group5
-  * @{
-  */
-/* Peripheral State functions *************************************************/
-HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup RTC_Private_Constants RTC Private Constants
-  * @{
-  */
-/* Masks Definition */
-#define RTC_TR_RESERVED_MASK    0x007F7F7FU
-#define RTC_DR_RESERVED_MASK    0x00FFFF3FU
-#define RTC_INIT_MASK           0xFFFFFFFFU
-#define RTC_RSF_MASK            0xFFFFFF5FU
-#define RTC_FLAGS_MASK          ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
-                                            RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \
-                                            RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \
-                                            RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F | \
-                                            RTC_FLAG_RECALPF | RTC_FLAG_SHPF))
-
-#define RTC_TIMEOUT_VALUE       1000
-
-#define RTC_EXTI_LINE_ALARM_EVENT             ((uint32_t)EXTI_IMR_MR17)  /*!< External interrupt line 17 Connected to the RTC Alarm event */
-/**
-  * @}
-  */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup RTC_Private_Macros RTC Private Macros
-  * @{
-  */
-
-/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters
-  * @{
-  */
-#define IS_RTC_HOUR_FORMAT(FORMAT)     (((FORMAT) == RTC_HOURFORMAT_12) || \
-                                        ((FORMAT) == RTC_HOURFORMAT_24))
-#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
-                               ((OUTPUT) == RTC_OUTPUT_ALARMA)  || \
-                               ((OUTPUT) == RTC_OUTPUT_ALARMB)  || \
-                               ((OUTPUT) == RTC_OUTPUT_WAKEUP))
-#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
-                                ((POL) == RTC_OUTPUT_POLARITY_LOW))
-#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
-                                  ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
-#define IS_RTC_HOUR12(HOUR)            (((HOUR) > 0U) && ((HOUR) <= 12U))
-#define IS_RTC_HOUR24(HOUR)            ((HOUR) <= 23U)
-#define IS_RTC_ASYNCH_PREDIV(PREDIV)   ((PREDIV) <= 0x7FU)
-#define IS_RTC_SYNCH_PREDIV(PREDIV)    ((PREDIV) <= 0x7FFFU)
-#define IS_RTC_MINUTES(MINUTES)        ((MINUTES) <= 59U)
-#define IS_RTC_SECONDS(SECONDS)        ((SECONDS) <= 59U)
-
-#define IS_RTC_HOURFORMAT12(PM)  (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM))
-#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
-                                      ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
-                                      ((SAVE) == RTC_DAYLIGHTSAVING_NONE))
-#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
-                                           ((OPERATION) == RTC_STOREOPERATION_SET))
-#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD))
-#define IS_RTC_YEAR(YEAR)              ((YEAR) <= 99U)
-#define IS_RTC_MONTH(MONTH)            (((MONTH) >= 1U) && ((MONTH) <= 12U))
-#define IS_RTC_DATE(DATE)              (((DATE) >= 1U) && ((DATE) <= 31U))
-#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY)    || \
-                                 ((WEEKDAY) == RTC_WEEKDAY_TUESDAY)   || \
-                                 ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
-                                 ((WEEKDAY) == RTC_WEEKDAY_THURSDAY)  || \
-                                 ((WEEKDAY) == RTC_WEEKDAY_FRIDAY)    || \
-                                 ((WEEKDAY) == RTC_WEEKDAY_SATURDAY)  || \
-                                 ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
-#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) > 0U) && ((DATE) <= 31U))
-#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY)    || \
-                                                    ((WEEKDAY) == RTC_WEEKDAY_TUESDAY)   || \
-                                                    ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
-                                                    ((WEEKDAY) == RTC_WEEKDAY_THURSDAY)  || \
-                                                    ((WEEKDAY) == RTC_WEEKDAY_FRIDAY)    || \
-                                                    ((WEEKDAY) == RTC_WEEKDAY_SATURDAY)  || \
-                                                    ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
-#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
-                                            ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
-#define IS_RTC_ALARM_MASK(MASK)  (((MASK) & 0x7F7F7F7FU) == (uint32_t)RESET)
-#define IS_RTC_ALARM(ALARM)      (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B))
-#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= 0x00007FFFU)
-
-#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK)   (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \
-                                              ((MASK) == RTC_ALARMSUBSECONDMASK_NONE))
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Private functions ---------------------------------------------------------*/
-/** @defgroup RTC_Private_Functions RTC Private Functions
-  * @{
-  */
-HAL_StatusTypeDef  RTC_EnterInitMode(RTC_HandleTypeDef* hrtc);
-uint8_t            RTC_ByteToBcd2(uint8_t Value);
-uint8_t            RTC_Bcd2ToByte(uint8_t Value);
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_RTC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rtc.h
+  * @author  MCD Application Team
+  * @brief   Header file of RTC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F4xx_HAL_RTC_H
+#define STM32F4xx_HAL_RTC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RTC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RTC_Exported_Types RTC Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_RTC_STATE_RESET             = 0x00U,  /*!< RTC not yet initialized or disabled */
+  HAL_RTC_STATE_READY             = 0x01U,  /*!< RTC initialized and ready for use   */
+  HAL_RTC_STATE_BUSY              = 0x02U,  /*!< RTC process is ongoing              */
+  HAL_RTC_STATE_TIMEOUT           = 0x03U,  /*!< RTC timeout state                   */
+  HAL_RTC_STATE_ERROR             = 0x04U   /*!< RTC error state                     */
+} HAL_RTCStateTypeDef;
+
+/**
+  * @brief  RTC Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t HourFormat;      /*!< Specifies the RTC Hour Format.
+                                 This parameter can be a value of @ref RTC_Hour_Formats */
+
+  uint32_t AsynchPrediv;    /*!< Specifies the RTC Asynchronous Predivider value.
+                                 This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
+
+  uint32_t SynchPrediv;     /*!< Specifies the RTC Synchronous Predivider value.
+                                 This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x7FFF */
+
+  uint32_t OutPut;          /*!< Specifies which signal will be routed to the RTC output.
+                                 This parameter can be a value of @ref RTC_Output_selection_Definitions */
+
+  uint32_t OutPutPolarity;  /*!< Specifies the polarity of the output signal.
+                                 This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
+
+  uint32_t OutPutType;      /*!< Specifies the RTC Output Pin mode.
+                                 This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
+} RTC_InitTypeDef;
+
+/**
+  * @brief  RTC Time structure definition
+  */
+typedef struct
+{
+  uint8_t Hours;            /*!< Specifies the RTC Time Hour.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
+
+  uint8_t Minutes;          /*!< Specifies the RTC Time Minutes.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+  uint8_t Seconds;          /*!< Specifies the RTC Time Seconds.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+  uint8_t TimeFormat;       /*!< Specifies the RTC AM/PM Time.
+                                 This parameter can be a value of @ref RTC_AM_PM_Definitions */
+
+  uint32_t SubSeconds;      /*!< Specifies the RTC_SSR RTC Sub Second register content.
+                                 This parameter corresponds to a time unit range between [0-1] Second
+                                 with [1 Sec / SecondFraction +1] granularity */
+
+  uint32_t SecondFraction;  /*!< Specifies the range or granularity of Sub Second register content
+                                 corresponding to Synchronous prescaler factor value (PREDIV_S)
+                                 This parameter corresponds to a time unit range between [0-1] Second
+                                 with [1 Sec / SecondFraction +1] granularity.
+                                 This field will be used only by HAL_RTC_GetTime function */
+
+  uint32_t DayLightSaving;  /*!< This interface is deprecated. To manage Daylight
+                                 Saving Time, please use HAL_RTC_DST_xxx functions */
+
+  uint32_t StoreOperation;  /*!< This interface is deprecated. To manage Daylight
+                                 Saving Time, please use HAL_RTC_DST_xxx functions */
+} RTC_TimeTypeDef;
+
+/**
+  * @brief  RTC Date structure definition
+  */
+typedef struct
+{
+  uint8_t WeekDay;  /*!< Specifies the RTC Date WeekDay.
+                         This parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+  uint8_t Month;    /*!< Specifies the RTC Date Month (in BCD format).
+                         This parameter can be a value of @ref RTC_Month_Date_Definitions */
+
+  uint8_t Date;     /*!< Specifies the RTC Date.
+                         This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+  uint8_t Year;     /*!< Specifies the RTC Date Year.
+                         This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
+
+} RTC_DateTypeDef;
+
+/**
+  * @brief  RTC Alarm structure definition
+  */
+typedef struct
+{
+  RTC_TimeTypeDef AlarmTime;     /*!< Specifies the RTC Alarm Time members */
+
+  uint32_t AlarmMask;            /*!< Specifies the RTC Alarm Masks.
+                                      This parameter can be a value of @ref RTC_AlarmMask_Definitions */
+
+  uint32_t AlarmSubSecondMask;   /*!< Specifies the RTC Alarm SubSeconds Masks.
+                                      This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
+
+  uint32_t AlarmDateWeekDaySel;  /*!< Specifies the RTC Alarm is on Date or WeekDay.
+                                      This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
+
+  uint8_t AlarmDateWeekDay;      /*!< Specifies the RTC Alarm Date/WeekDay.
+                                      If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
+                                      If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+  uint32_t Alarm;                /*!< Specifies the alarm .
+                                      This parameter can be a value of @ref RTC_Alarms_Definitions */
+} RTC_AlarmTypeDef;
+
+/**
+  * @brief  RTC Handle Structure definition
+  */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+typedef struct __RTC_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+{
+  RTC_TypeDef                 *Instance;  /*!< Register base address    */
+
+  RTC_InitTypeDef             Init;       /*!< RTC required parameters  */
+
+  HAL_LockTypeDef             Lock;       /*!< RTC locking object       */
+
+  __IO HAL_RTCStateTypeDef    State;      /*!< Time communication state */
+
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+  void (* AlarmAEventCallback)      (struct __RTC_HandleTypeDef *hrtc);  /*!< RTC Alarm A Event callback         */
+
+  void (* AlarmBEventCallback)      (struct __RTC_HandleTypeDef *hrtc);  /*!< RTC Alarm B Event callback         */
+
+  void (* TimeStampEventCallback)   (struct __RTC_HandleTypeDef *hrtc);  /*!< RTC Timestamp Event callback       */
+
+  void (* WakeUpTimerEventCallback) (struct __RTC_HandleTypeDef *hrtc);  /*!< RTC WakeUpTimer Event callback     */
+
+  void (* Tamper1EventCallback)     (struct __RTC_HandleTypeDef *hrtc);  /*!< RTC Tamper 1 Event callback        */
+
+#if defined(RTC_TAMPER2_SUPPORT)
+  void (* Tamper2EventCallback)     (struct __RTC_HandleTypeDef *hrtc);  /*!< RTC Tamper 2 Event callback        */
+#endif /* RTC_TAMPER2_SUPPORT */
+
+  void (* MspInitCallback)          (struct __RTC_HandleTypeDef *hrtc);  /*!< RTC Msp Init callback              */
+
+  void (* MspDeInitCallback)        (struct __RTC_HandleTypeDef *hrtc);  /*!< RTC Msp DeInit callback            */
+
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+} RTC_HandleTypeDef;
+
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL RTC Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_RTC_ALARM_A_EVENT_CB_ID           = 0x00U,    /*!< RTC Alarm A Event Callback ID       */
+  HAL_RTC_ALARM_B_EVENT_CB_ID           = 0x01U,    /*!< RTC Alarm B Event Callback ID       */
+  HAL_RTC_TIMESTAMP_EVENT_CB_ID         = 0x02U,    /*!< RTC Timestamp Event Callback ID     */
+  HAL_RTC_WAKEUPTIMER_EVENT_CB_ID       = 0x03U,    /*!< RTC Wakeup Timer Event Callback ID  */
+  HAL_RTC_TAMPER1_EVENT_CB_ID           = 0x04U,    /*!< RTC Tamper 1 Callback ID            */
+#if defined(RTC_TAMPER2_SUPPORT)
+  HAL_RTC_TAMPER2_EVENT_CB_ID           = 0x05U,    /*!< RTC Tamper 2 Callback ID            */
+#endif /* RTC_TAMPER2_SUPPORT */
+  HAL_RTC_MSPINIT_CB_ID                 = 0x0EU,    /*!< RTC Msp Init callback ID            */
+  HAL_RTC_MSPDEINIT_CB_ID               = 0x0FU     /*!< RTC Msp DeInit callback ID          */
+} HAL_RTC_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL RTC Callback pointer definition
+  */
+typedef  void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc);  /*!< pointer to an RTC callback function */
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RTC_Exported_Constants RTC Exported Constants
+  * @{
+  */
+
+/** @defgroup RTC_Hour_Formats RTC Hour Formats
+  * @{
+  */
+#define RTC_HOURFORMAT_24              0x00000000U
+#define RTC_HOURFORMAT_12              RTC_CR_FMT
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Output_selection_Definitions RTC Output Selection Definitions
+  * @{
+  */
+#define RTC_OUTPUT_DISABLE             0x00000000U
+#define RTC_OUTPUT_ALARMA              RTC_CR_OSEL_0
+#define RTC_OUTPUT_ALARMB              RTC_CR_OSEL_1
+#define RTC_OUTPUT_WAKEUP              RTC_CR_OSEL
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions
+  * @{
+  */
+#define RTC_OUTPUT_POLARITY_HIGH       0x00000000U
+#define RTC_OUTPUT_POLARITY_LOW        RTC_CR_POL
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT
+  * @{
+  */
+#define RTC_OUTPUT_TYPE_OPENDRAIN      0x00000000U
+#define RTC_OUTPUT_TYPE_PUSHPULL       RTC_TAFCR_ALARMOUTTYPE
+/**
+  * @}
+  */
+
+/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions
+  * @{
+  */
+#define RTC_HOURFORMAT12_AM            ((uint8_t)0x00)
+#define RTC_HOURFORMAT12_PM            ((uint8_t)0x01)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_DayLightSaving_Definitions RTC DayLight Saving Definitions
+  * @{
+  */
+#define RTC_DAYLIGHTSAVING_SUB1H       RTC_CR_SUB1H
+#define RTC_DAYLIGHTSAVING_ADD1H       RTC_CR_ADD1H
+#define RTC_DAYLIGHTSAVING_NONE        0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup RTC_StoreOperation_Definitions RTC Store Operation Definitions
+  * @{
+  */
+#define RTC_STOREOPERATION_RESET        0x00000000U
+#define RTC_STOREOPERATION_SET          RTC_CR_BKP
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions
+  * @{
+  */
+#define RTC_FORMAT_BIN                  0x00000000U
+#define RTC_FORMAT_BCD                  0x00000001U
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions (in BCD format)
+  * @{
+  */
+#define RTC_MONTH_JANUARY              ((uint8_t)0x01)
+#define RTC_MONTH_FEBRUARY             ((uint8_t)0x02)
+#define RTC_MONTH_MARCH                ((uint8_t)0x03)
+#define RTC_MONTH_APRIL                ((uint8_t)0x04)
+#define RTC_MONTH_MAY                  ((uint8_t)0x05)
+#define RTC_MONTH_JUNE                 ((uint8_t)0x06)
+#define RTC_MONTH_JULY                 ((uint8_t)0x07)
+#define RTC_MONTH_AUGUST               ((uint8_t)0x08)
+#define RTC_MONTH_SEPTEMBER            ((uint8_t)0x09)
+#define RTC_MONTH_OCTOBER              ((uint8_t)0x10)
+#define RTC_MONTH_NOVEMBER             ((uint8_t)0x11)
+#define RTC_MONTH_DECEMBER             ((uint8_t)0x12)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
+  * @{
+  */
+#define RTC_WEEKDAY_MONDAY             ((uint8_t)0x01)
+#define RTC_WEEKDAY_TUESDAY            ((uint8_t)0x02)
+#define RTC_WEEKDAY_WEDNESDAY          ((uint8_t)0x03)
+#define RTC_WEEKDAY_THURSDAY           ((uint8_t)0x04)
+#define RTC_WEEKDAY_FRIDAY             ((uint8_t)0x05)
+#define RTC_WEEKDAY_SATURDAY           ((uint8_t)0x06)
+#define RTC_WEEKDAY_SUNDAY             ((uint8_t)0x07)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC Alarm Date WeekDay Definitions
+  * @{
+  */
+#define RTC_ALARMDATEWEEKDAYSEL_DATE      0x00000000U
+#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY   RTC_ALRMAR_WDSEL
+/**
+  * @}
+  */
+
+/** @defgroup RTC_AlarmMask_Definitions RTC Alarm Mask Definitions
+  * @{
+  */
+#define RTC_ALARMMASK_NONE                0x00000000U
+#define RTC_ALARMMASK_DATEWEEKDAY         RTC_ALRMAR_MSK4
+#define RTC_ALARMMASK_HOURS               RTC_ALRMAR_MSK3
+#define RTC_ALARMMASK_MINUTES             RTC_ALRMAR_MSK2
+#define RTC_ALARMMASK_SECONDS             RTC_ALRMAR_MSK1
+#define RTC_ALARMMASK_ALL                 (RTC_ALARMMASK_DATEWEEKDAY | \
+                                           RTC_ALARMMASK_HOURS       | \
+                                           RTC_ALARMMASK_MINUTES     | \
+                                           RTC_ALARMMASK_SECONDS)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions
+  * @{
+  */
+#define RTC_ALARM_A                       RTC_CR_ALRAE
+#define RTC_ALARM_B                       RTC_CR_ALRBE
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions
+  * @{
+  */
+/*!< All Alarm SS fields are masked. There is no comparison on sub seconds for Alarm */
+#define RTC_ALARMSUBSECONDMASK_ALL         0x00000000U
+/*!< SS[14:1] are don't care in Alarm comparison. Only SS[0] is compared.     */
+#define RTC_ALARMSUBSECONDMASK_SS14_1      RTC_ALRMASSR_MASKSS_0
+/*!< SS[14:2] are don't care in Alarm comparison. Only SS[1:0] are compared.  */
+#define RTC_ALARMSUBSECONDMASK_SS14_2      RTC_ALRMASSR_MASKSS_1
+/*!< SS[14:3] are don't care in Alarm comparison. Only SS[2:0] are compared.  */
+#define RTC_ALARMSUBSECONDMASK_SS14_3      (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1)
+/*!< SS[14:4] are don't care in Alarm comparison. Only SS[3:0] are compared.  */
+#define RTC_ALARMSUBSECONDMASK_SS14_4      RTC_ALRMASSR_MASKSS_2
+/*!< SS[14:5] are don't care in Alarm comparison. Only SS[4:0] are compared.  */
+#define RTC_ALARMSUBSECONDMASK_SS14_5      (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2)
+/*!< SS[14:6] are don't care in Alarm comparison. Only SS[5:0] are compared.  */
+#define RTC_ALARMSUBSECONDMASK_SS14_6      (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2)
+/*!< SS[14:7] are don't care in Alarm comparison. Only SS[6:0] are compared.  */
+#define RTC_ALARMSUBSECONDMASK_SS14_7      (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2)
+/*!< SS[14:8] are don't care in Alarm comparison. Only SS[7:0] are compared.  */
+#define RTC_ALARMSUBSECONDMASK_SS14_8      RTC_ALRMASSR_MASKSS_3
+/*!< SS[14:9] are don't care in Alarm comparison. Only SS[8:0] are compared.  */
+#define RTC_ALARMSUBSECONDMASK_SS14_9      (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_3)
+/*!< SS[14:10] are don't care in Alarm comparison. Only SS[9:0] are compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_10     (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3)
+/*!< SS[14:11] are don't care in Alarm comparison. Only SS[10:0] are compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_11     (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3)
+/*!< SS[14:12] are don't care in Alarm comparison. Only SS[11:0] are compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_12     (RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3)
+/*!< SS[14:13] are don't care in Alarm comparison. Only SS[12:0] are compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_13     (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3)
+/*!< SS[14] is don't care in Alarm comparison. Only SS[13:0] are compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14        (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3)
+/*!< SS[14:0] are compared and must match to activate alarm. */
+#define RTC_ALARMSUBSECONDMASK_NONE        RTC_ALRMASSR_MASKSS
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions
+  * @{
+  */
+#define RTC_IT_TS                         RTC_CR_TSIE         /*!< Enable Timestamp Interrupt               */
+#define RTC_IT_WUT                        RTC_CR_WUTIE        /*!< Enable Wakeup timer Interrupt            */
+#define RTC_IT_ALRB                       RTC_CR_ALRBIE       /*!< Enable Alarm B Interrupt                 */
+#define RTC_IT_ALRA                       RTC_CR_ALRAIE       /*!< Enable Alarm A Interrupt                 */
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Flags_Definitions RTC Flags Definitions
+  * @{
+  */
+#define RTC_FLAG_RECALPF                  RTC_ISR_RECALPF     /*!< Recalibration pending flag               */
+#if defined(RTC_TAMPER2_SUPPORT)
+#define RTC_FLAG_TAMP2F                   RTC_ISR_TAMP2F      /*!< Tamper 2 event flag                      */
+#endif /* RTC_TAMPER2_SUPPORT */
+#define RTC_FLAG_TAMP1F                   RTC_ISR_TAMP1F      /*!< Tamper 1 event flag                      */
+#define RTC_FLAG_TSOVF                    RTC_ISR_TSOVF       /*!< Timestamp overflow flag                  */
+#define RTC_FLAG_TSF                      RTC_ISR_TSF         /*!< Timestamp event flag                     */
+#define RTC_FLAG_WUTF                     RTC_ISR_WUTF        /*!< Wakeup timer event flag                  */
+#define RTC_FLAG_ALRBF                    RTC_ISR_ALRBF       /*!< Alarm B event flag                       */
+#define RTC_FLAG_ALRAF                    RTC_ISR_ALRAF       /*!< Alarm A event flag                       */
+#define RTC_FLAG_INITF                    RTC_ISR_INITF       /*!< RTC in initialization mode flag          */
+#define RTC_FLAG_RSF                      RTC_ISR_RSF         /*!< Register synchronization flag            */
+#define RTC_FLAG_INITS                    RTC_ISR_INITS       /*!< RTC initialization status flag           */
+#define RTC_FLAG_SHPF                     RTC_ISR_SHPF        /*!< Shift operation pending flag             */
+#define RTC_FLAG_WUTWF                    RTC_ISR_WUTWF       /*!< WUTR register write allowance flag       */
+#define RTC_FLAG_ALRBWF                   RTC_ISR_ALRBWF      /*!< ALRMBR register write allowance flag     */
+#define RTC_FLAG_ALRAWF                   RTC_ISR_ALRAWF      /*!< ALRMAR register write allowance flag     */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup RTC_Exported_Macros RTC Exported Macros
+  * @{
+  */
+
+/** @brief Reset RTC handle state
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do {                                            \
+                                                      (__HANDLE__)->State = HAL_RTC_STATE_RESET; \
+                                                      (__HANDLE__)->MspInitCallback = NULL;      \
+                                                      (__HANDLE__)->MspDeInitCallback = NULL;    \
+                                                    } while(0U)
+#else
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Disable the write protection for RTC registers.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) do {                                       \
+                                                           (__HANDLE__)->Instance->WPR = 0xCAU;  \
+                                                           (__HANDLE__)->Instance->WPR = 0x53U;  \
+                                                         } while(0U)
+
+/**
+  * @brief  Enable the write protection for RTC registers.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) do {                                       \
+                                                          (__HANDLE__)->Instance->WPR = 0xFFU;  \
+                                                        } while(0U)
+
+
+/**
+  * @brief  Enable the RTC ALARMA peripheral.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__)                           ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
+
+/**
+  * @brief  Disable the RTC ALARMA peripheral.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__)                          ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
+
+/**
+  * @brief  Enable the RTC ALARMB peripheral.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__)                           ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
+
+/**
+  * @brief  Disable the RTC ALARMB peripheral.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__)                          ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
+
+/**
+  * @brief  Enable the RTC Alarm interrupt.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled.
+  *          This parameter can be any combination of the following values:
+  *             @arg RTC_IT_ALRA: Alarm A interrupt
+  *             @arg RTC_IT_ALRB: Alarm B interrupt
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__)          ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the RTC Alarm interrupt.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled.
+  *          This parameter can be any combination of the following values:
+  *             @arg RTC_IT_ALRA: Alarm A interrupt
+  *             @arg RTC_IT_ALRB: Alarm B interrupt
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__)         ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified RTC Alarm interrupt has occurred or not.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Alarm interrupt to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_ALRA: Alarm A interrupt
+  *            @arg RTC_IT_ALRB: Alarm B interrupt
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__)           (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4U)) != 0U) ? 1U : 0U)
+
+/**
+  * @brief  Get the selected RTC Alarm's flag status.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __FLAG__ specifies the RTC Alarm Flag to check.
+  *         This parameter can be:
+  *            @arg RTC_FLAG_ALRAF: Alarm A interrupt flag
+  *            @arg RTC_FLAG_ALRAWF: Alarm A 'write allowed' flag
+  *            @arg RTC_FLAG_ALRBF: Alarm B interrupt flag
+  *            @arg RTC_FLAG_ALRBWF: Alarm B 'write allowed' flag
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__)                (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U)
+
+/**
+  * @brief  Clear the RTC Alarm's pending flags.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __FLAG__ specifies the RTC Alarm flag to be cleared.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_ALRAF
+  *             @arg RTC_FLAG_ALRBF
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__)                  ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+  * @brief  Check whether the specified RTC Alarm interrupt has been enabled or not.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Alarm interrupt sources to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_ALRA: Alarm A interrupt
+  *            @arg RTC_IT_ALRB: Alarm B interrupt
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U)
+
+/**
+  * @brief  Enable interrupt on the RTC Alarm associated EXTI line.
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_IT()            (EXTI->IMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Disable interrupt on the RTC Alarm associated EXTI line.
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_IT()           (EXTI->IMR &= ~RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Enable event on the RTC Alarm associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT()          (EXTI->EMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Disable event on the RTC Alarm associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT()         (EXTI->EMR &= ~RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Enable falling edge trigger on the RTC Alarm associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Disable falling edge trigger on the RTC Alarm associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Enable rising edge trigger on the RTC Alarm associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Disable rising edge trigger on the RTC Alarm associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Enable rising & falling edge trigger on the RTC Alarm associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() do {                                             \
+                                                               __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();  \
+                                                               __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE(); \
+                                                             } while(0U)
+
+/**
+  * @brief  Disable rising & falling edge trigger on the RTC Alarm associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() do {                                              \
+                                                                __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE();  \
+                                                                __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE(); \
+                                                              } while(0U)
+
+/**
+  * @brief Check whether the RTC Alarm associated EXTI line interrupt flag is set or not.
+  * @retval Line Status.
+  */
+#define __HAL_RTC_ALARM_EXTI_GET_FLAG()              (EXTI->PR & RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief Clear the RTC Alarm associated EXTI line flag.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()            (EXTI->PR = RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief Generate a Software interrupt on RTC Alarm associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()         (EXTI->SWIER |= RTC_EXTI_LINE_ALARM_EVENT)
+/**
+  * @}
+  */
+
+/* Include RTC HAL Extended module */
+#include "stm32f4xx_hal_rtc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup RTC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
+void              HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void              HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group2
+  * @{
+  */
+/* RTC Time and Date functions ************************************************/
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group3
+  * @{
+  */
+/* RTC Alarm functions ********************************************************/
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
+void              HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+void              HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef   HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc);
+
+/* RTC Daylight Saving Time functions *****************************************/
+void              HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc);
+void              HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc);
+void              HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc);
+void              HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc);
+uint32_t          HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc);
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group5
+  * @{
+  */
+/* Peripheral State functions *************************************************/
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+
+/** @defgroup RTC_Private_Constants RTC Private Constants
+  * @{
+  */
+/* Masks Definition */
+#define RTC_TR_RESERVED_MASK    ((uint32_t)(RTC_TR_HT  | RTC_TR_HU  | \
+                                            RTC_TR_MNT | RTC_TR_MNU | \
+                                            RTC_TR_ST  | RTC_TR_SU  | \
+                                            RTC_TR_PM))
+#define RTC_DR_RESERVED_MASK    ((uint32_t)(RTC_DR_YT | RTC_DR_YU | \
+                                            RTC_DR_MT | RTC_DR_MU | \
+                                            RTC_DR_DT | RTC_DR_DU | \
+                                            RTC_DR_WDU))
+#define RTC_INIT_MASK           0xFFFFFFFFU
+#define RTC_RSF_MASK            ((uint32_t)~(RTC_ISR_INIT | RTC_ISR_RSF))
+#define RTC_FLAGS_MASK          ((uint32_t)(RTC_FLAG_INITF   | RTC_FLAG_INITS  | \
+                                            RTC_FLAG_ALRAF   | RTC_FLAG_ALRAWF | \
+                                            RTC_FLAG_ALRBF   | RTC_FLAG_ALRBWF | \
+                                            RTC_FLAG_WUTF    | RTC_FLAG_WUTWF  | \
+                                            RTC_FLAG_RECALPF | RTC_FLAG_SHPF   | \
+                                            RTC_FLAG_TSF     | RTC_FLAG_TSOVF  | \
+                                            RTC_FLAG_RSF     | RTC_TAMPER_FLAGS_MASK))
+
+#define RTC_TIMEOUT_VALUE       1000U
+
+#define RTC_EXTI_LINE_ALARM_EVENT  EXTI_IMR_MR17  /*!< External interrupt line 17 Connected to the RTC Alarm event */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @defgroup RTC_Private_Macros RTC Private Macros
+  * @{
+  */
+
+/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters
+  * @{
+  */
+#define IS_RTC_HOUR_FORMAT(FORMAT)     (((FORMAT) == RTC_HOURFORMAT_12) || \
+                                        ((FORMAT) == RTC_HOURFORMAT_24))
+
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+                               ((OUTPUT) == RTC_OUTPUT_ALARMA)  || \
+                               ((OUTPUT) == RTC_OUTPUT_ALARMB)  || \
+                               ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+
+#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
+                                ((POL) == RTC_OUTPUT_POLARITY_LOW))
+
+#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
+                                  ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
+
+#define IS_RTC_ASYNCH_PREDIV(PREDIV)   ((PREDIV) <= 0x7FU)
+#define IS_RTC_SYNCH_PREDIV(PREDIV)    ((PREDIV) <= 0x7FFFU)
+
+#define IS_RTC_HOUR12(HOUR)            (((HOUR) > 0U) && ((HOUR) <= 12U))
+#define IS_RTC_HOUR24(HOUR)            ((HOUR) <= 23U)
+#define IS_RTC_MINUTES(MINUTES)        ((MINUTES) <= 59U)
+#define IS_RTC_SECONDS(SECONDS)        ((SECONDS) <= 59U)
+
+#define IS_RTC_HOURFORMAT12(PM)  (((PM) == RTC_HOURFORMAT12_AM) || \
+                                  ((PM) == RTC_HOURFORMAT12_PM))
+
+#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
+                                      ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
+                                      ((SAVE) == RTC_DAYLIGHTSAVING_NONE))
+
+#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
+                                           ((OPERATION) == RTC_STOREOPERATION_SET))
+
+#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD))
+
+#define IS_RTC_YEAR(YEAR)              ((YEAR) <= 99U)
+#define IS_RTC_MONTH(MONTH)            (((MONTH) >= 1U) && ((MONTH) <= 12U))
+#define IS_RTC_DATE(DATE)              (((DATE) >= 1U) && ((DATE) <= 31U))
+
+#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY)    || \
+                                 ((WEEKDAY) == RTC_WEEKDAY_TUESDAY)   || \
+                                 ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+                                 ((WEEKDAY) == RTC_WEEKDAY_THURSDAY)  || \
+                                 ((WEEKDAY) == RTC_WEEKDAY_FRIDAY)    || \
+                                 ((WEEKDAY) == RTC_WEEKDAY_SATURDAY)  || \
+                                 ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+
+#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) > 0U) && ((DATE) <= 31U))
+
+#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY)    || \
+                                                    ((WEEKDAY) == RTC_WEEKDAY_TUESDAY)   || \
+                                                    ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+                                                    ((WEEKDAY) == RTC_WEEKDAY_THURSDAY)  || \
+                                                    ((WEEKDAY) == RTC_WEEKDAY_FRIDAY)    || \
+                                                    ((WEEKDAY) == RTC_WEEKDAY_SATURDAY)  || \
+                                                    ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+
+#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
+                                            ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
+
+#define IS_RTC_ALARM_MASK(MASK)  (((MASK) & ((uint32_t)~RTC_ALARMMASK_ALL)) == 0U)
+
+#define IS_RTC_ALARM(ALARM)      (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B))
+
+#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= RTC_ALRMASSR_SS)
+
+#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK)   (((MASK) == RTC_ALARMSUBSECONDMASK_ALL)     || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1)  || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2)  || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3)  || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4)  || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5)  || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6)  || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7)  || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8)  || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9)  || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14)    || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_NONE))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RTC_Private_Functions RTC Private Functions
+  * @{
+  */
+HAL_StatusTypeDef  RTC_EnterInitMode(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef  RTC_ExitInitMode(RTC_HandleTypeDef *hrtc);
+uint8_t            RTC_ByteToBcd2(uint8_t number);
+uint8_t            RTC_Bcd2ToByte(uint8_t number);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F4xx_HAL_RTC_H */

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h

@@ -1,1011 +1,1079 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_rtc_ex.h
-  * @author  MCD Application Team
-  * @brief   Header file of RTC HAL Extension module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_RTC_EX_H
-#define __STM32F4xx_HAL_RTC_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal_def.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup RTCEx
-  * @{
-  */ 
-
-/* Exported types ------------------------------------------------------------*/ 
-/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
-  * @{
-  */
-
-/** 
-  * @brief  RTC Tamper structure definition  
-  */
-typedef struct 
-{
-  uint32_t Tamper;                      /*!< Specifies the Tamper Pin.
-                                             This parameter can be a value of @ref  RTCEx_Tamper_Pins_Definitions */
-
-  uint32_t PinSelection;                /*!< Specifies the Tamper Pin.
-                                             This parameter can be a value of @ref  RTCEx_Tamper_Pins_Selection */
-
-  uint32_t Trigger;                     /*!< Specifies the Tamper Trigger.
-                                             This parameter can be a value of @ref  RTCEx_Tamper_Trigger_Definitions */
-
-  uint32_t Filter;                      /*!< Specifies the RTC Filter Tamper.
-                                             This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
-
-  uint32_t SamplingFrequency;           /*!< Specifies the sampling frequency.
-                                             This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
-
-  uint32_t PrechargeDuration;           /*!< Specifies the Precharge Duration .
-                                             This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ 
-
-  uint32_t TamperPullUp;                /*!< Specifies the Tamper PullUp .
-                                             This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */           
-
-  uint32_t TimeStampOnTamperDetection;  /*!< Specifies the TimeStampOnTamperDetection.
-                                             This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
-}RTC_TamperTypeDef;
-/**
-  * @}
-  */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
-  * @{
-  */ 
-
-/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
-  * @{
-  */
-#define RTC_BKP_DR0                       0x00000000U
-#define RTC_BKP_DR1                       0x00000001U
-#define RTC_BKP_DR2                       0x00000002U
-#define RTC_BKP_DR3                       0x00000003U
-#define RTC_BKP_DR4                       0x00000004U
-#define RTC_BKP_DR5                       0x00000005U
-#define RTC_BKP_DR6                       0x00000006U
-#define RTC_BKP_DR7                       0x00000007U
-#define RTC_BKP_DR8                       0x00000008U
-#define RTC_BKP_DR9                       0x00000009U
-#define RTC_BKP_DR10                      0x0000000AU
-#define RTC_BKP_DR11                      0x0000000BU
-#define RTC_BKP_DR12                      0x0000000CU
-#define RTC_BKP_DR13                      0x0000000DU
-#define RTC_BKP_DR14                      0x0000000EU
-#define RTC_BKP_DR15                      0x0000000FU
-#define RTC_BKP_DR16                      0x00000010U
-#define RTC_BKP_DR17                      0x00000011U
-#define RTC_BKP_DR18                      0x00000012U
-#define RTC_BKP_DR19                      0x00000013U
-/**
-  * @}
-  */ 
-
-/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC TimeStamp Edges Definitions
-  * @{
-  */ 
-#define RTC_TIMESTAMPEDGE_RISING          0x00000000U
-#define RTC_TIMESTAMPEDGE_FALLING         0x00000008U
-/**
-  * @}
-  */
-  
-/** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions
-  * @{
-  */
-#define RTC_TAMPER_1                    RTC_TAFCR_TAMP1E
-
-#if !defined(STM32F412Zx) && !defined(STM32F412Vx) && !defined(STM32F412Rx) && !defined(STM32F412Cx) && !defined(STM32F413xx) && !defined(STM32F423xx)
-#define RTC_TAMPER_2                    RTC_TAFCR_TAMP2E
-#endif
-/**
-  * @}
-  */
-
-/** @defgroup RTCEx_Tamper_Pins_Selection RTC tamper Pins Selection
-  * @{
-  */
-
-#define RTC_TAMPERPIN_DEFAULT               0x00000000U
-
-#if !defined(STM32F412Zx) && !defined(STM32F412Vx) && !defined(STM32F412Rx) && !defined(STM32F412Cx) && !defined(STM32F413xx) && !defined(STM32F423xx)
-#define RTC_TAMPERPIN_POS1                  0x00010000U
-#endif
-/**
-  * @}
-  */ 
-
-/** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection
-  * @{
-  */ 
-#define RTC_TIMESTAMPPIN_DEFAULT            0x00000000U
-
-#if !defined(STM32F412Zx) && !defined(STM32F412Vx) && !defined(STM32F412Rx) && !defined(STM32F412Cx) && !defined(STM32F413xx) && !defined(STM32F423xx)
-#define RTC_TIMESTAMPPIN_POS1               0x00020000U
-#endif
-/**
-  * @}
-  */ 
-
-/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions
-  * @{
-  */ 
-#define RTC_TAMPERTRIGGER_RISINGEDGE       0x00000000U
-#define RTC_TAMPERTRIGGER_FALLINGEDGE      0x00000002U
-#define RTC_TAMPERTRIGGER_LOWLEVEL         RTC_TAMPERTRIGGER_RISINGEDGE
-#define RTC_TAMPERTRIGGER_HIGHLEVEL        RTC_TAMPERTRIGGER_FALLINGEDGE
-/**
-  * @}
-  */  
-
-/** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions
-  * @{
-  */ 
-#define RTC_TAMPERFILTER_DISABLE   0x00000000U  /*!< Tamper filter is disabled */
-
-#define RTC_TAMPERFILTER_2SAMPLE   0x00000800U  /*!< Tamper is activated after 2 
-                                                                consecutive samples at the active level */
-#define RTC_TAMPERFILTER_4SAMPLE   0x00001000U  /*!< Tamper is activated after 4 
-                                                                consecutive samples at the active level */
-#define RTC_TAMPERFILTER_8SAMPLE   0x00001800U  /*!< Tamper is activated after 8 
-                                                                consecutive samples at the active level. */
-/**
-  * @}
-  */
-
-/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions
-  * @{
-  */ 
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768  0x00000000U  /*!< Each of the tamper inputs are sampled
-                                                                             with a frequency =  RTCCLK / 32768 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384  0x00000100U  /*!< Each of the tamper inputs are sampled
-                                                                             with a frequency =  RTCCLK / 16384 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192   0x00000200U  /*!< Each of the tamper inputs are sampled
-                                                                             with a frequency =  RTCCLK / 8192  */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096   0x00000300U  /*!< Each of the tamper inputs are sampled
-                                                                             with a frequency =  RTCCLK / 4096  */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048   0x00000400U  /*!< Each of the tamper inputs are sampled
-                                                                             with a frequency =  RTCCLK / 2048  */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024   0x00000500U  /*!< Each of the tamper inputs are sampled
-                                                                             with a frequency =  RTCCLK / 1024  */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512    0x00000600U  /*!< Each of the tamper inputs are sampled
-                                                                             with a frequency =  RTCCLK / 512   */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256    0x00000700U  /*!< Each of the tamper inputs are sampled
-                                                                             with a frequency =  RTCCLK / 256   */
-/**
-  * @}
-  */
-
-/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions
-  * @{
-  */ 
-#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U  /*!< Tamper pins are pre-charged before 
-                                                                         sampling during 1 RTCCLK cycle */
-#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK 0x00002000U  /*!< Tamper pins are pre-charged before 
-                                                                         sampling during 2 RTCCLK cycles */
-#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK 0x00004000U  /*!< Tamper pins are pre-charged before 
-                                                                         sampling during 4 RTCCLK cycles */
-#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK 0x00006000U  /*!< Tamper pins are pre-charged before 
-                                                                         sampling during 8 RTCCLK cycles */
-/**
-  * @}
-  */
-  
-/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Tamper TimeStamp On Tamper Detection Definitions
-  * @{
-  */ 
-#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE  ((uint32_t)RTC_TAFCR_TAMPTS)  /*!< TimeStamp on Tamper Detection event saved        */
-#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000U        /*!< TimeStamp on Tamper Detection event is not saved */
-/**
-  * @}
-  */
-  
-/** @defgroup  RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions
-  * @{
-  */ 
-#define RTC_TAMPER_PULLUP_ENABLE  0x00000000U            /*!< TimeStamp on Tamper Detection event saved        */
-#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS)   /*!< TimeStamp on Tamper Detection event is not saved */
-/**
-  * @}
-  */
-
-/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wake-up Timer Definitions
-  * @{
-  */ 
-#define RTC_WAKEUPCLOCK_RTCCLK_DIV16        0x00000000U
-#define RTC_WAKEUPCLOCK_RTCCLK_DIV8         0x00000001U
-#define RTC_WAKEUPCLOCK_RTCCLK_DIV4         0x00000002U
-#define RTC_WAKEUPCLOCK_RTCCLK_DIV2         0x00000003U
-#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS      0x00000004U
-#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS      0x00000006U
-/**
-  * @}
-  */ 
-
-/** @defgroup RTCEx_Digital_Calibration_Definitions RTC Digital Calib Definitions
-  * @{
-  */ 
-#define RTC_CALIBSIGN_POSITIVE            0x00000000U 
-#define RTC_CALIBSIGN_NEGATIVE            0x00000080U
-/**
-  * @}
-  */
-
-/** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions
-  * @{
-  */ 
-#define RTC_SMOOTHCALIB_PERIOD_32SEC   0x00000000U  /*!< If RTCCLK = 32768 Hz, Smooth calibration
-                                                                    period is 32s,  else 2exp20 RTCCLK seconds */
-#define RTC_SMOOTHCALIB_PERIOD_16SEC   0x00002000U  /*!< If RTCCLK = 32768 Hz, Smooth calibration 
-                                                                    period is 16s, else 2exp19 RTCCLK seconds */
-#define RTC_SMOOTHCALIB_PERIOD_8SEC    0x00004000U  /*!< If RTCCLK = 32768 Hz, Smooth calibration 
-                                                                    period is 8s, else 2exp18 RTCCLK seconds */
-/**
-  * @}
-  */ 
-
-/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions
-  * @{
-  */ 
-#define RTC_SMOOTHCALIB_PLUSPULSES_SET    0x00008000U  /*!< The number of RTCCLK pulses added  
-                                                                       during a X -second window = Y - CALM[8:0] 
-                                                                       with Y = 512, 256, 128 when X = 32, 16, 8 */
-#define RTC_SMOOTHCALIB_PLUSPULSES_RESET  0x00000000U  /*!< The number of RTCCLK pulses subbstited
-                                                                       during a 32-second window = CALM[8:0] */
-/**
-  * @}
-  */
-
-/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions
-  * @{
-  */ 
-#define RTC_SHIFTADD1S_RESET      0x00000000U
-#define RTC_SHIFTADD1S_SET        0x80000000U
-/**
-  * @}
-  */ 
-
-
- /** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions
-  * @{
-  */ 
-#define RTC_CALIBOUTPUT_512HZ            0x00000000U 
-#define RTC_CALIBOUTPUT_1HZ              0x00080000U
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-  
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
-  * @{
-  */
-
-/* ---------------------------------WAKEUPTIMER---------------------------------*/
-/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
-  * @{
-  */
-
-/**
-  * @brief  Enable the RTC WakeUp Timer peripheral.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__)                      ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
-
-/**
-  * @brief  Disable the RTC Wake-up Timer peripheral.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__)                     ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
-
-/**
-  * @brief  Enable the RTC WakeUpTimer interrupt.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. 
-  *         This parameter can be:
-  *            @arg RTC_IT_WUT: WakeUpTimer A interrupt
-  * @retval None
-  */
-#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-
-/**
-  * @brief  Disable the RTC WakeUpTimer interrupt.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. 
-  *         This parameter can be:
-  *            @arg RTC_IT_WUT: WakeUpTimer A interrupt
-  * @retval None
-  */
-#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-
-/**
-  * @brief  Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check.
-  *         This parameter can be:
-  *            @arg RTC_IT_WUT:  WakeUpTimer A interrupt
-  * @retval None
-  */
-#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__)            (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
-
-/**
-  * @brief  Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check.
-  *         This parameter can be:
-  *            @arg RTC_IT_WUT:  WakeUpTimer interrupt
-  * @retval None
-  */
-#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)   (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
-
-/**
-  * @brief  Get the selected RTC WakeUpTimer's flag status.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __FLAG__ specifies the RTC WakeUpTimer Flag to check.
-  *          This parameter can be:
-  *             @arg RTC_FLAG_WUTF   
-  *             @arg RTC_FLAG_WUTWF     
-  * @retval None
-  */
-#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__)          (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-
-/**
-  * @brief  Clear the RTC Wake Up timer's pending flags.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __FLAG__ specifies the RTC Tamper Flag sources to be enabled or disabled.
-  *         This parameter can be:
-  *            @arg RTC_FLAG_WUTF   
-  * @retval None
-  */
-#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__)            ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) 
-
-/**
-  * @brief  Enable interrupt on the RTC Wake-up Timer associated Exti line.
-  * @retval None
-  */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT()       (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-
-/**
-  * @brief  Disable interrupt on the RTC Wake-up Timer associated Exti line.
-  * @retval None
-  */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT()      (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
-
-/**
-  * @brief  Enable event on the RTC Wake-up Timer associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT()    (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-
-/**
-  * @brief  Disable event on the RTC Wake-up Timer associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT()   (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
-
-/**
-  * @brief  Enable falling edge trigger on the RTC Wake-up Timer associated Exti line. 
-  * @retval None.
-  */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-
-/**
-  * @brief  Disable falling edge trigger on the RTC Wake-up Timer associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
-
-/**
-  * @brief  Enable rising edge trigger on the RTC Wake-up Timer associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-
-/**
-  * @brief  Disable rising edge trigger on the RTC Wake-up Timer associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
-
-/**
-  * @brief  Enable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();\
-                                                                     __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();\
-                                                                   } while(0U)  
-
-/**
-  * @brief  Disable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
-  * This parameter can be:
-  * @retval None.
-  */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();\
-                                                                      __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();\
-                                                                    } while(0U)  
-
-/**
-  * @brief Check whether the RTC Wake-up Timer associated Exti line interrupt flag is set or not.
-  * @retval Line Status.
-  */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG()              (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-
-/**
-  * @brief Clear the RTC Wake-up Timer associated Exti line flag.
-  * @retval None.
-  */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG()            (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-
-/**
-  * @brief Generate a Software interrupt on the RTC Wake-up Timer associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT()         (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-
-/**
-  * @}
-  */
-
-/* ---------------------------------TIMESTAMP---------------------------------*/
-/** @defgroup RTCEx_Timestamp RTC Timestamp
-  * @{
-  */
-
-/**
-  * @brief  Enable the RTC TimeStamp peripheral.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__)                        ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
-
-/**
-  * @brief  Disable the RTC TimeStamp peripheral.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__)                       ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
-
-/**
-  * @brief  Enable the RTC TimeStamp interrupt.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC TimeStamp interrupt sources to be enabled or disabled. 
-  *         This parameter can be:
-  *            @arg RTC_IT_TS: TimeStamp interrupt
-  * @retval None
-  */
-#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__)      ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-
-/**
-  * @brief  Disable the RTC TimeStamp interrupt.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC TimeStamp interrupt sources to be enabled or disabled. 
-  *         This parameter can be:
-  *            @arg RTC_IT_TS: TimeStamp interrupt
-  * @retval None
-  */
-#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__)     ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-
-/**
-  * @brief  Check whether the specified RTC TimeStamp interrupt has occurred or not.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC TimeStamp interrupt to check.
-  *         This parameter can be:
-  *            @arg RTC_IT_TS: TimeStamp interrupt
-  * @retval None
-  */
-#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__)         (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
-
-/**
-  * @brief  Check whether the specified RTC Time Stamp interrupt has been enabled or not.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check.
-  *         This parameter can be:
-  *            @arg RTC_IT_TS: TimeStamp interrupt
-  * @retval None
-  */
-#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
-
-/**
-  * @brief  Get the selected RTC TimeStamp's flag status.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __FLAG__ specifies the RTC TimeStamp flag to check.
-  *         This parameter can be:
-  *            @arg RTC_FLAG_TSF   
-  *            @arg RTC_FLAG_TSOVF     
-  * @retval None
-  */
-#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__)            (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-
-/**
-  * @brief  Clear the RTC Time Stamp's pending flags.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __FLAG__ specifies the RTC Alarm Flag sources to be enabled or disabled.
-  *          This parameter can be:
-  *             @arg RTC_FLAG_TSF  
-  * @retval None
-  */
-#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__)          ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-
-/**
-  * @}
-  */
-
-/* ---------------------------------TAMPER------------------------------------*/
-/** @defgroup RTCEx_Tamper RTC Tamper
-  * @{
-  */
-
-/**
-  * @brief  Enable the RTC Tamper1 input detection.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))
-
-/**
-  * @brief  Disable the RTC Tamper1 input detection.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))
-                                                                      
-#if !defined(STM32F412Zx) && !defined(STM32F412Vx) && !defined(STM32F412Rx) && !defined(STM32F412Cx) && !defined(STM32F413xx) && !defined(STM32F423xx)
-/**
-  * @brief  Enable the RTC Tamper2 input detection.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E))
-
-/**
-  * @brief  Disable the RTC Tamper2 input detection.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E))
-#endif
-                                                                      
-/**
-  * @brief  Check whether the specified RTC Tamper interrupt has occurred or not.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC Tamper interrupt to check.
-  *         This parameter can be:
-  *            @arg  RTC_IT_TAMP1
-  *            @arg  RTC_IT_TAMP2
-  * @retval None
-  */
-#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__)       (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
-
-/**
-  * @brief  Check whether the specified RTC Tamper interrupt has been enabled or not.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __INTERRUPT__ specifies the RTC Tamper interrupt source to check.
-  *         This parameter can be:
-  *            @arg RTC_IT_TAMP: Tamper interrupt
-  * @retval None
-  */
-#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
-
-/**
-  * @brief  Get the selected RTC Tamper's flag status.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __FLAG__ specifies the RTC Tamper Flag sources to be enabled or disabled.
-  *          This parameter can be:
-  *             @arg RTC_FLAG_TAMP1F 
-  *             @arg RTC_FLAG_TAMP2F  
-  * @retval None
-  */
-#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__)               (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-
-/**
-  * @brief  Clear the RTC Tamper's pending flags.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __FLAG__ specifies the RTC Tamper Flag to clear.
-  *          This parameter can be:
-  *             @arg RTC_FLAG_TAMP1F
-  *             @arg RTC_FLAG_TAMP2F 
-  * @retval None
-  */
-#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)         ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-/**
-  * @}
-  */
-
-/* --------------------------TAMPER/TIMESTAMP---------------------------------*/
-/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
-  * @{
-  */
-
-/**
-  * @brief  Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
-  * @retval None
-  */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()        (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-
-/**
-  * @brief  Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
-  * @retval None
-  */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()       (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
-
-/**
-  * @brief  Enable event on the RTC Tamper and Timestamp associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT()    (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-
-/**
-  * @brief  Disable event on the RTC Tamper and Timestamp associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT()   (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
-
-/**
-  * @brief  Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. 
-  * @retval None.
-  */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-
-/**
-  * @brief  Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
-
-/**
-  * @brief  Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-
-/**
-  * @brief  Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
-
-/**
-  * @brief  Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
-  * @retval None.
-  */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();\
-                                                                          __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \
-                                                                        } while(0U)  
-
-/**
-  * @brief  Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
-  * This parameter can be:
-  * @retval None.
-  */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();\
-                                                                           __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();\
-                                                                         } while(0U)  
-
-/**
-  * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
-  * @retval Line Status.
-  */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()         (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-
-/**
-  * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
-  * @retval None.
-  */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()       (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-
-/**
-  * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
-  * @retval None.
-  */
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()    (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-/**
-  * @}
-  */
-
-/* ------------------------------Calibration----------------------------------*/
-/** @defgroup RTCEx_Calibration RTC Calibration
-  * @{
-  */
-
-/**
-  * @brief  Enable the Coarse calibration process.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__)                       ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))
-
-/**
-  * @brief  Disable the Coarse calibration process.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__)                      ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))
-
-/**
-  * @brief  Enable the RTC calibration output.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
-
-/**
-  * @brief  Disable the calibration output.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
-
-/**
-  * @brief  Enable the clock reference detection.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
-
-/**
-  * @brief  Disable the clock reference detection.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @retval None
-  */
-#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
-
-/**
-  * @brief  Get the selected RTC shift operation's flag status.
-  * @param  __HANDLE__ specifies the RTC handle.
-  * @param  __FLAG__ specifies the RTC shift operation Flag is pending or not.
-  *          This parameter can be:
-  *             @arg RTC_FLAG_SHPF   
-  * @retval None
-  */
-#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__)                (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
-  * @{
-  */
-
-/** @addtogroup RTCEx_Exported_Functions_Group1
-  * @{
-  */
-/* RTC TimeStamp and Tamper functions *****************************************/
-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
-
-HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
-HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
-void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
-
-void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
-void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
-void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-/**
-  * @}
-  */
-
-/** @addtogroup RTCEx_Exported_Functions_Group2
-  * @{
-  */
-/* RTC Wake-up functions ******************************************************/
-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
-uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
-uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
-void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
-void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-/**
-  * @}
-  */
-
-/** @addtogroup RTCEx_Exported_Functions_Group3
-  * @{
-  */
-/* Extension Control functions ************************************************/
-void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
-uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
-
-HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
-HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
-HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
-/**
-  * @}
-  */
-
-/** @addtogroup RTCEx_Exported_Functions_Group4
-  * @{
-  */
-/* Extension RTC features functions *******************************************/
-void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); 
-HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
-  * @{
-  */
-#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT  ((uint32_t)EXTI_IMR_MR21)  /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
-#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT       ((uint32_t)EXTI_IMR_MR22)  /*!< External interrupt line 22 Connected to the RTC Wake-up event */
-/**
-  * @}
-  */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
-  * @{
-  */
-
-/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
-  * @{
-  */ 
-#define IS_RTC_BKP(BKP)                   (((BKP) == RTC_BKP_DR0)  || \
-                                           ((BKP) == RTC_BKP_DR1)  || \
-                                           ((BKP) == RTC_BKP_DR2)  || \
-                                           ((BKP) == RTC_BKP_DR3)  || \
-                                           ((BKP) == RTC_BKP_DR4)  || \
-                                           ((BKP) == RTC_BKP_DR5)  || \
-                                           ((BKP) == RTC_BKP_DR6)  || \
-                                           ((BKP) == RTC_BKP_DR7)  || \
-                                           ((BKP) == RTC_BKP_DR8)  || \
-                                           ((BKP) == RTC_BKP_DR9)  || \
-                                           ((BKP) == RTC_BKP_DR10) || \
-                                           ((BKP) == RTC_BKP_DR11) || \
-                                           ((BKP) == RTC_BKP_DR12) || \
-                                           ((BKP) == RTC_BKP_DR13) || \
-                                           ((BKP) == RTC_BKP_DR14) || \
-                                           ((BKP) == RTC_BKP_DR15) || \
-                                           ((BKP) == RTC_BKP_DR16) || \
-                                           ((BKP) == RTC_BKP_DR17) || \
-                                           ((BKP) == RTC_BKP_DR18) || \
-                                           ((BKP) == RTC_BKP_DR19))
-#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
-                                 ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
-
-#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
-#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)!(RTC_TAFCR_TAMP1E ))) == 0x00U) && ((TAMPER) != (uint32_t)RESET))
-#else
-#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)!(RTC_TAFCR_TAMP1E | RTC_TAFCR_TAMP2E))) == 0x00U) && ((TAMPER) != (uint32_t)RESET))
-#endif
-
-#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
-#define IS_RTC_TAMPER_PIN(PIN) ((PIN) == RTC_TAMPERPIN_DEFAULT)
-#else
-#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_DEFAULT) || \
-                                ((PIN) == RTC_TAMPERPIN_POS1))
-#endif 
-
-#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
-#define IS_RTC_TIMESTAMP_PIN(PIN) ((PIN) == RTC_TIMESTAMPPIN_DEFAULT)
-#else
-#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT) || \
-                                   ((PIN) == RTC_TIMESTAMPPIN_POS1))
-#endif
-#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
-                                        ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
-                                        ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
-                                        ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL)) 
-#define IS_RTC_TAMPER_FILTER(FILTER)  (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
-                                       ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
-                                       ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
-                                       ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
-#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512)  || \
-                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
-#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
-                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
-                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
-                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
-#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
-                                                              ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
-#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
-                                           ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
-#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16)   || \
-                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8)    || \
-                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4)    || \
-                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2)    || \
-                                    ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
-                                    ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
-
-#define IS_RTC_WAKEUP_COUNTER(COUNTER)  ((COUNTER) <= 0xFFFFU)
-#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \
-                                 ((SIGN) == RTC_CALIBSIGN_NEGATIVE))
-
-#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20U)
-
-#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
-                                            ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
-                                            ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) 
-#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
-                                        ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
-
-#define  IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FFU)
-#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
-                                 ((SEL) == RTC_SHIFTADD1S_SET)) 
-#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFFU)
-#define IS_RTC_CALIB_OUTPUT(OUTPUT)  (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
-                                      ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-  
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_RTC_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rtc_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of RTC HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F4xx_HAL_RTC_EX_H
+#define STM32F4xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RTCEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
+  * @{
+  */
+
+/**
+  * @brief  RTC Tamper structure definition
+  */
+typedef struct
+{
+  uint32_t Tamper;                      /*!< Specifies the Tamper Pin.
+                                             This parameter can be a value of @ref RTCEx_Tamper_Pin_Definitions */
+
+  uint32_t PinSelection;                /*!< Specifies the Tamper Pin.
+                                             This parameter can be a value of @ref RTCEx_Tamper_Pin_Selection */
+
+  uint32_t Trigger;                     /*!< Specifies the Tamper Trigger.
+                                             This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
+
+  uint32_t Filter;                      /*!< Specifies the RTC Filter Tamper.
+                                             This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+
+  uint32_t SamplingFrequency;           /*!< Specifies the sampling frequency.
+                                             This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+
+  uint32_t PrechargeDuration;           /*!< Specifies the Precharge Duration .
+                                             This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
+
+  uint32_t TamperPullUp;                /*!< Specifies the Tamper PullUp .
+                                             This parameter can be a value of @ref RTCEx_Tamper_Pull_Up_Definitions */
+
+  uint32_t TimeStampOnTamperDetection;  /*!< Specifies the TimeStampOnTamperDetection.
+                                             This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+} RTC_TamperTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
+  * @{
+  */
+
+/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definitions
+  * @{
+  */
+#define RTC_BKP_DR0                       0x00000000U
+#define RTC_BKP_DR1                       0x00000001U
+#define RTC_BKP_DR2                       0x00000002U
+#define RTC_BKP_DR3                       0x00000003U
+#define RTC_BKP_DR4                       0x00000004U
+#define RTC_BKP_DR5                       0x00000005U
+#define RTC_BKP_DR6                       0x00000006U
+#define RTC_BKP_DR7                       0x00000007U
+#define RTC_BKP_DR8                       0x00000008U
+#define RTC_BKP_DR9                       0x00000009U
+#define RTC_BKP_DR10                      0x0000000AU
+#define RTC_BKP_DR11                      0x0000000BU
+#define RTC_BKP_DR12                      0x0000000CU
+#define RTC_BKP_DR13                      0x0000000DU
+#define RTC_BKP_DR14                      0x0000000EU
+#define RTC_BKP_DR15                      0x0000000FU
+#define RTC_BKP_DR16                      0x00000010U
+#define RTC_BKP_DR17                      0x00000011U
+#define RTC_BKP_DR18                      0x00000012U
+#define RTC_BKP_DR19                      0x00000013U
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Timestamp_Edges_Definitions RTCEx Timestamp Edges Definitions
+  * @{
+  */
+#define RTC_TIMESTAMPEDGE_RISING          0x00000000U
+#define RTC_TIMESTAMPEDGE_FALLING         RTC_CR_TSEDGE
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Timestamp_Pin_Selection RTC Timestamp Pin Selection
+  * @{
+  */
+#define RTC_TIMESTAMPPIN_DEFAULT            0x00000000U
+#if defined(RTC_AF2_SUPPORT)
+#define RTC_TIMESTAMPPIN_POS1               RTC_TAFCR_TSINSEL
+#endif /* RTC_AF2_SUPPORT */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Pin_Definitions RTCEx Tamper Pins Definitions
+  * @{
+  */
+#define RTC_TAMPER_1                    RTC_TAFCR_TAMP1E
+#if defined(RTC_TAMPER2_SUPPORT)
+#define RTC_TAMPER_2                    RTC_TAFCR_TAMP2E
+#endif /* RTC_TAMPER2_SUPPORT */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Pin_Selection RTC tamper Pins Selection
+  * @{
+  */
+#define RTC_TAMPERPIN_DEFAULT               0x00000000U
+#if defined(RTC_AF2_SUPPORT)
+#define RTC_TAMPERPIN_POS1                  RTC_TAFCR_TAMP1INSEL
+#endif /* RTC_AF2_SUPPORT */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Interrupt_Definitions RTCEx Tamper Interrupt Definitions
+  * @{
+  */
+#define RTC_IT_TAMP                       RTC_TAFCR_TAMPIE   /*!< Enable global Tamper Interrupt           */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Triggers Definitions
+  * @{
+  */
+#define RTC_TAMPERTRIGGER_RISINGEDGE       0x00000000U
+#define RTC_TAMPERTRIGGER_FALLINGEDGE      RTC_TAFCR_TAMP1TRG
+#define RTC_TAMPERTRIGGER_LOWLEVEL         RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL        RTC_TAMPERTRIGGER_FALLINGEDGE
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definitions
+  * @{
+  */
+#define RTC_TAMPERFILTER_DISABLE   0x00000000U             /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE   RTC_TAFCR_TAMPFLT_0    /*!< Tamper is activated after 2
+                                                                 consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE   RTC_TAFCR_TAMPFLT_1    /*!< Tamper is activated after 4
+                                                                 consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE   RTC_TAFCR_TAMPFLT      /*!< Tamper is activated after 8
+                                                                 consecutive samples at the active level */
+#define RTC_TAMPERFILTER_MASK      RTC_TAFCR_TAMPFLT      /*!< Masking all bits except those of
+                                                                 field TAMPFLT                           */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definitions
+  * @{
+  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768  0x00000000U                                     /*!< Each of the tamper inputs are sampled
+                                                                                                      with a frequency =  RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384  RTC_TAFCR_TAMPFREQ_0                           /*!< Each of the tamper inputs are sampled
+                                                                                                      with a frequency =  RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192   RTC_TAFCR_TAMPFREQ_1                           /*!< Each of the tamper inputs are sampled
+                                                                                                      with a frequency =  RTCCLK / 8192  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096   (RTC_TAFCR_TAMPFREQ_0 | RTC_TAFCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled
+                                                                                                      with a frequency =  RTCCLK / 4096  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048   RTC_TAFCR_TAMPFREQ_2                           /*!< Each of the tamper inputs are sampled
+                                                                                                      with a frequency =  RTCCLK / 2048  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024   (RTC_TAFCR_TAMPFREQ_0 | RTC_TAFCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled
+                                                                                                      with a frequency =  RTCCLK / 1024  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512    (RTC_TAFCR_TAMPFREQ_1 | RTC_TAFCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled
+                                                                                                      with a frequency =  RTCCLK / 512   */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256    RTC_TAFCR_TAMPFREQ                             /*!< Each of the tamper inputs are sampled
+                                                                                                      with a frequency =  RTCCLK / 256   */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK      RTC_TAFCR_TAMPFREQ                             /*!< Masking all bits except those of
+                                                                                                      field TAMPFREQ                     */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definitions
+  * @{
+  */
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK     0x00000000U             /*!< Tamper pins are pre-charged before
+                                                                              sampling during 1 RTCCLK cycle  */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK     RTC_TAFCR_TAMPPRCH_0   /*!< Tamper pins are pre-charged before
+                                                                              sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK     RTC_TAFCR_TAMPPRCH_1   /*!< Tamper pins are pre-charged before
+                                                                              sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK     RTC_TAFCR_TAMPPRCH     /*!< Tamper pins are pre-charged before
+                                                                              sampling during 8 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_MASK        RTC_TAFCR_TAMPPRCH     /*!< Masking all bits except those of
+                                                                              field TAMPPRCH                  */
+/**
+  * @}
+  */
+
+/** @defgroup  RTCEx_Tamper_Pull_Up_Definitions RTCEx Tamper Pull Up Definitions
+  * @{
+  */
+#define RTC_TAMPER_PULLUP_ENABLE  0x00000000U           /*!< Tamper pins are pre-charged before sampling     */
+#define RTC_TAMPER_PULLUP_DISABLE RTC_TAFCR_TAMPPUDIS   /*!< Tamper pins are not pre-charged before sampling */
+#define RTC_TAMPER_PULLUP_MASK    RTC_TAFCR_TAMPPUDIS   /*!< Masking all bits except bit TAMPPUDIS           */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStamp On Tamper Detection Definitions
+  * @{
+  */
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE  RTC_TAFCR_TAMPTS  /*!< TimeStamp on Tamper Detection event saved        */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000U       /*!< TimeStamp on Tamper Detection event is not saved */
+#define RTC_TIMESTAMPONTAMPERDETECTION_MASK    RTC_TAFCR_TAMPTS  /*!< Masking all bits except bit TAMPTS               */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions
+  * @{
+  */
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16        0x00000000U
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8         RTC_CR_WUCKSEL_0
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4         RTC_CR_WUCKSEL_1
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2         (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS      RTC_CR_WUCKSEL_2
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS      (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2)
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Coarse_Calibration_Definitions RTCEx Coarse Calib Definitions
+  * @{
+  */
+#define RTC_CALIBSIGN_POSITIVE            0x00000000U
+#define RTC_CALIBSIGN_NEGATIVE            RTC_CALIBR_DCS
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth Calib Period Definitions
+  * @{
+  */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC   0x00000000U      /*!< If RTCCLK = 32768 Hz, smooth calibration
+                                                              period is 32s, otherwise 2^20 RTCCLK pulses */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC   RTC_CALR_CALW16  /*!< If RTCCLK = 32768 Hz, smooth calibration
+                                                              period is 16s, otherwise 2^19 RTCCLK pulses */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC    RTC_CALR_CALW8   /*!< If RTCCLK = 32768 Hz, smooth calibration
+                                                              period is 8s, otherwise 2^18 RTCCLK pulses  */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth Calib Plus Pulses Definitions
+  * @{
+  */
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET    RTC_CALR_CALP           /*!< The number of RTCCLK pulses added
+                                                                        during a X -second window = Y - CALM[8:0]
+                                                                        with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET  0x00000000U             /*!< The number of RTCCLK pulses subbstited
+                                                                        during a 32-second window = CALM[8:0] */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTCEx Add 1 Second Parameter Definitions
+  * @{
+  */
+#define RTC_SHIFTADD1S_RESET      0x00000000U
+#define RTC_SHIFTADD1S_SET        RTC_SHIFTR_ADD1S
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output Selection Definitions
+  * @{
+  */
+#define RTC_CALIBOUTPUT_512HZ            0x00000000U
+#define RTC_CALIBOUTPUT_1HZ              RTC_CR_COSEL
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
+  * @{
+  */
+
+/* ---------------------------------WAKEUPTIMER-------------------------------*/
+
+/** @defgroup RTCEx_WakeUp_Timer RTCEx WakeUp Timer
+  * @{
+  */
+
+/**
+  * @brief  Enable the RTC WakeUp Timer peripheral.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__)                      ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+
+/**
+  * @brief  Disable the RTC Wakeup Timer peripheral.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__)                     ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+
+/**
+  * @brief  Enable the RTC Wakeup Timer interrupt.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Wakeup Timer interrupt sources to be enabled or disabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT: Wakeup Timer interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the RTC Wakeup Timer interrupt.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Wakeup Timer interrupt sources to be enabled or disabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT: Wakeup Timer interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified RTC Wakeup Timer interrupt has occurred or not.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Wakeup Timer interrupt to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT: Wakeup Timer interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__)          (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4U)) != 0U) ? 1U : 0U)
+
+/**
+  * @brief  Check whether the specified RTC Wakeup timer interrupt has been enabled or not.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Wakeup timer interrupt sources to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT: WakeUpTimer interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)   (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U)
+
+/**
+  * @brief  Get the selected RTC Wakeup Timer's flag status.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __FLAG__ specifies the RTC Wakeup Timer flag to check.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_WUTF: Wakeup Timer interrupt flag
+  *             @arg RTC_FLAG_WUTWF: Wakeup Timer 'write allowed' flag
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__)          (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U)? 1U : 0U)
+
+/**
+  * @brief  Clear the RTC Wakeup timer's pending flags.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __FLAG__ specifies the RTC Wakeup Timer Flag to clear.
+  *         This parameter can be:
+  *             @arg RTC_FLAG_WUTF: Wakeup Timer interrupt Flag
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__)            ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+  * @brief  Enable interrupt on the RTC Wakeup Timer associated EXTI line.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT()       (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable interrupt on the RTC Wakeup Timer associated EXTI line.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT()      (EXTI->IMR &= ~RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Enable event on the RTC Wakeup Timer associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT()    (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable event on the RTC Wakeup Timer associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT()   (EXTI->EMR &= ~RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Enable falling edge trigger on the RTC Wakeup Timer associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable falling edge trigger on the RTC Wakeup Timer associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Enable rising edge trigger on the RTC Wakeup Timer associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable rising edge trigger on the RTC Wakeup Timer associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Enable rising & falling edge trigger on the RTC Wakeup Timer associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do {                                                   \
+                                                                     __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();  \
+                                                                     __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); \
+                                                                   } while(0U)
+
+/**
+  * @brief  Disable rising & falling edge trigger on the RTC Wakeup Timer associated EXTI line.
+  * This parameter can be:
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do {                                                    \
+                                                                      __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();  \
+                                                                      __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); \
+                                                                    } while(0U)
+
+/**
+  * @brief Check whether the RTC Wakeup Timer associated EXTI line interrupt flag is set or not.
+  * @retval Line Status.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG()              (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief Clear the RTC Wakeup Timer associated EXTI line flag.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG()            (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief Generate a Software interrupt on the RTC Wakeup Timer associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT()         (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @}
+  */
+
+/* ---------------------------------TIMESTAMP---------------------------------*/
+
+/** @defgroup RTCEx_Timestamp RTCEx Timestamp
+  * @{
+  */
+
+/**
+  * @brief  Enable the RTC Timestamp peripheral.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__)                        ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+/**
+  * @brief  Disable the RTC Timestamp peripheral.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__)                       ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+  * @brief  Enable the RTC Timestamp interrupt.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Timestamp interrupt sources to be enabled or disabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__)      ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the RTC Timestamp interrupt.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Timestamp interrupt sources to be enabled or disabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__)     ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified RTC Timestamp interrupt has occurred or not.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Timestamp interrupt to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__)         (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4U)) != 0U) ? 1U : 0U)
+
+/**
+  * @brief  Check whether the specified RTC Timestamp interrupt has been enabled or not.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Timestamp interrupt source to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U)
+
+/**
+  * @brief  Get the selected RTC Timestamp's flag status.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __FLAG__ specifies the RTC Timestamp flag to check.
+  *         This parameter can be:
+  *            @arg RTC_FLAG_TSF: Timestamp interrupt flag
+  *            @arg RTC_FLAG_TSOVF: Timestamp overflow flag
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__)            (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U)? 1U : 0U)
+
+/**
+  * @brief  Clear the RTC Timestamp's pending flags.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __FLAG__ specifies the RTC Timestamp flag to clear.
+  *         This parameter can be:
+  *            @arg RTC_FLAG_TSF: Timestamp interrupt flag
+  *            @arg RTC_FLAG_TSOVF: Timestamp overflow flag
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__)          ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+  * @}
+  */
+
+/* ---------------------------------TAMPER------------------------------------*/
+
+/** @defgroup RTCEx_Tamper RTCEx Tamper
+  * @{
+  */
+
+/**
+  * @brief  Enable the RTC Tamper1 input detection.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))
+
+/**
+  * @brief  Disable the RTC Tamper1 input detection.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))
+
+#if defined(RTC_TAMPER2_SUPPORT)
+/**
+  * @brief  Enable the RTC Tamper2 input detection.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E))
+
+/**
+  * @brief  Disable the RTC Tamper2 input detection.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E))
+#endif /* RTC_TAMPER2_SUPPORT */
+
+/**
+  * @brief  Enable the RTC Tamper interrupt.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg RTC_IT_TAMP: Tamper global interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__)        ((__HANDLE__)->Instance->TAFCR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the RTC Tamper interrupt.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled.
+  *         This parameter can be any combination of the following values:
+  *            @arg RTC_IT_TAMP: Tamper global interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__)       ((__HANDLE__)->Instance->TAFCR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified RTC Tamper interrupt has occurred or not.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Tamper interrupt to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_TAMP1: Tamper 1 interrupt
+  *            @arg RTC_IT_TAMP2: Tamper 2 interrupt
+  * @note   RTC_IT_TAMP2 is not applicable to all devices.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__)       (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4U)) != 0U) ? 1U : 0U)
+
+/**
+  * @brief  Check whether the specified RTC Tamper interrupt has been enabled or not.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __INTERRUPT__ specifies the RTC Tamper interrupt source to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_TAMP: Tamper global interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != 0U) ? 1U : 0U)
+
+/**
+  * @brief  Get the selected RTC Tamper's flag status.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __FLAG__ specifies the RTC Tamper flag to be checked.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_TAMP1F: Tamper 1 interrupt flag
+  *             @arg RTC_FLAG_TAMP2F: Tamper 2 interrupt flag
+  * @note   RTC_FLAG_TAMP2F is not applicable to all devices.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__)               (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U)? 1U : 0U)
+
+/**
+  * @brief  Clear the RTC Tamper's pending flags.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __FLAG__ specifies the RTC Tamper Flag to clear.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_TAMP1F: Tamper 1 interrupt flag
+  *             @arg RTC_FLAG_TAMP2F: Tamper 2 interrupt flag
+  * @note   RTC_FLAG_TAMP2F is not applicable to all devices.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)         ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+/**
+  * @}
+  */
+
+/* --------------------------TAMPER/TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
+  * @{
+  */
+
+/**
+  * @brief  Enable interrupt on the RTC Tamper and Timestamp associated EXTI line.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()        (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable interrupt on the RTC Tamper and Timestamp associated EXTI line.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()       (EXTI->IMR &= ~RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Enable event on the RTC Tamper and Timestamp associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT()    (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable event on the RTC Tamper and Timestamp associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT()   (EXTI->EMR &= ~RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Enable falling edge trigger on the RTC Tamper and Timestamp associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable falling edge trigger on the RTC Tamper and Timestamp associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Enable rising edge trigger on the RTC Tamper and Timestamp associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable rising edge trigger on the RTC Tamper and Timestamp associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated EXTI line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do {                                                        \
+                                                                          __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();  \
+                                                                          __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \
+                                                                        } while(0U)
+
+/**
+  * @brief  Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated EXTI line.
+  * This parameter can be:
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do {                                                         \
+                                                                           __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();  \
+                                                                           __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); \
+                                                                         } while(0U)
+
+/**
+  * @brief Check whether the RTC Tamper and Timestamp associated EXTI line interrupt flag is set or not.
+  * @retval Line Status.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()         (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief Clear the RTC Tamper and Timestamp associated EXTI line flag.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()       (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated EXTI line
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()    (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+/**
+  * @}
+  */
+
+/* ------------------------------CALIBRATION----------------------------------*/
+
+/** @defgroup RTCEx_Calibration RTCEx Calibration
+  * @{
+  */
+
+/**
+  * @brief  Enable the Coarse calibration process.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__)                       ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))
+
+/**
+  * @brief  Disable the Coarse calibration process.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__)                      ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))
+
+/**
+  * @brief  Enable the RTC calibration output.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+  * @brief  Disable the calibration output.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+  * @brief  Enable the clock reference detection.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+  * @brief  Disable the clock reference detection.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+  * @brief  Get the selected RTC shift operation's flag status.
+  * @param  __HANDLE__ specifies the RTC handle.
+  * @param  __FLAG__ specifies the RTC shift operation Flag is pending or not.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_SHPF: Shift pending flag
+  * @retval None
+  */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__)                (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U)? 1U : 0U)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+  * @{
+  */
+
+/** @addtogroup RTCEx_Exported_Functions_Group1
+  * @{
+  */
+/* RTC Timestamp and Tamper functions *****************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t RTC_TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t RTC_TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void              HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void              HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+#if defined(RTC_TAMPER2_SUPPORT)
+void              HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+#endif /* RTC_TAMPER2_SUPPORT */
+void              HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#if defined(RTC_TAMPER2_SUPPORT)
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#endif /* RTC_TAMPER2_SUPPORT */
+/**
+  * @}
+  */
+
+/** @addtogroup RTCEx_Exported_Functions_Group2
+  * @{
+  */
+/* RTC Wakeup functions ******************************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t          HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void              HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void              HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/** @addtogroup RTCEx_Exported_Functions_Group3
+  * @{
+  */
+/* Extended Control functions ************************************************/
+void              HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t          HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+
+HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+/**
+  * @}
+  */
+
+/** @addtogroup RTCEx_Exported_Functions_Group4
+  * @{
+  */
+/* Extended RTC features functions *******************************************/
+void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+
+/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
+  * @{
+  */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT  EXTI_IMR_MR21  /*!< External interrupt line 21 Connected to the RTC Tamper and Timestamp event */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT       EXTI_IMR_MR22  /*!< External interrupt line 22 Connected to the RTC Wakeup event */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
+  * @{
+  */
+/* Masks Definition */
+#if defined(RTC_TAMPER2_SUPPORT)
+#define RTC_TAMPER_ENABLE_BITS_MASK         ((uint32_t) (RTC_TAMPER_1 | \
+                                                         RTC_TAMPER_2))
+
+#define RTC_TAMPER_FLAGS_MASK               ((uint32_t) (RTC_FLAG_TAMP1F | \
+                                                         RTC_FLAG_TAMP2F))
+#else /* RTC_TAMPER2_SUPPORT */
+#define RTC_TAMPER_ENABLE_BITS_MASK                      RTC_TAMPER_1
+
+#define RTC_TAMPER_FLAGS_MASK                            RTC_FLAG_TAMP1F
+#endif /* RTC_TAMPER2_SUPPORT */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
+  * @{
+  */
+
+/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
+  * @{
+  */
+#define IS_RTC_BKP(BKP)     ((BKP) < (uint32_t) RTC_BKP_NUMBER)
+
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+                                 ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)~RTC_TAMPER_ENABLE_BITS_MASK)) == 0x00U) && ((TAMPER) != 0U))
+
+#if defined(RTC_AF2_SUPPORT)
+#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_DEFAULT) || \
+                                ((PIN) == RTC_TAMPERPIN_POS1))
+#else /* RTC_AF2_SUPPORT */
+#define IS_RTC_TAMPER_PIN(PIN) ((PIN) == RTC_TAMPERPIN_DEFAULT)
+#endif /* RTC_AF2_SUPPORT */
+
+#if defined(RTC_AF2_SUPPORT)
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT) || \
+                                   ((PIN) == RTC_TIMESTAMPPIN_POS1))
+#else /* RTC_AF2_SUPPORT */
+#define IS_RTC_TIMESTAMP_PIN(PIN) ((PIN) == RTC_TIMESTAMPPIN_DEFAULT)
+#endif /* RTC_AF2_SUPPORT */
+
+#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE)  || \
+                                        ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+                                        ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL)    || \
+                                        ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+
+#define IS_RTC_TAMPER_FILTER(FILTER)  (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+                                       ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+                                       ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+                                       ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+
+#define IS_RTC_TAMPER_FILTER_CONFIG_CORRECT(FILTER, TRIGGER)                  \
+                        (  (  ((FILTER) != RTC_TAMPERFILTER_DISABLE)          \
+                           && (  ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL)    \
+                              || ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))) \
+                        || (  ((FILTER) == RTC_TAMPERFILTER_DISABLE)          \
+                           && (  ((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE)  \
+                              || ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE))))
+
+#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512)  || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+
+#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+
+#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+                                           ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+
+#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+                                                              ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+
+#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16)   || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8)    || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4)    || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2)    || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_RTC_WAKEUP_COUNTER(COUNTER)  ((COUNTER) <= RTC_WUTR_WUT)
+
+#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \
+                                 ((SIGN) == RTC_CALIBSIGN_NEGATIVE))
+
+#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20U)
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+                                            ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+                                            ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+                                        ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+
+#define  IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM)
+
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+                                 ((SEL) == RTC_SHIFTADD1S_SET))
+
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS)
+
+#define IS_RTC_CALIB_OUTPUT(OUTPUT)  (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+                                      ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F4xx_HAL_RTC_EX_H */

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -65,8 +64,10 @@ typedef struct
                                     This means in PWM mode that (N+1) corresponds to:
                                         - the number of PWM periods in edge-aligned mode
                                         - the number of half PWM period in center-aligned mode
-                                     GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
-                                     Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+                                     GP timers: this parameter must be a number between Min_Data = 0x00 and
+                                     Max_Data = 0xFF.
+                                     Advanced timers: this parameter must be a number between Min_Data = 0x0000 and
+                                     Max_Data = 0xFFFF. */
 
   uint32_t AutoReloadPreload;  /*!< Specifies the auto-reload preload.
                                    This parameter can be a value of @ref TIM_AutoReloadPreload */
@@ -218,7 +219,8 @@ typedef struct
   uint32_t ClearInputPolarity;   /*!< TIM Clear Input polarity
                                       This parameter can be a value of @ref TIM_ClearInput_Polarity */
   uint32_t ClearInputPrescaler;  /*!< TIM Clear Input prescaler
-                                      This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */
+                                      This parameter must be 0: When OCRef clear feature is used with ETR source,
+                                      ETR prescaler must be off */
   uint32_t ClearInputFilter;     /*!< TIM Clear Input filter
                                       This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
 } TIM_ClearInputConfigTypeDef;
@@ -264,22 +266,22 @@ typedef struct
   */
 typedef struct
 {
-  uint32_t OffStateRunMode;      /*!< TIM off state in run mode
-                                      This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
-  uint32_t OffStateIDLEMode;     /*!< TIM off state in IDLE mode
-                                      This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
-  uint32_t LockLevel;            /*!< TIM Lock level
-                                      This parameter can be a value of @ref TIM_Lock_level */
-  uint32_t DeadTime;             /*!< TIM dead Time
-                                      This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
-  uint32_t BreakState;           /*!< TIM Break State
-                                      This parameter can be a value of @ref TIM_Break_Input_enable_disable */
-  uint32_t BreakPolarity;        /*!< TIM Break input polarity
-                                      This parameter can be a value of @ref TIM_Break_Polarity */
-  uint32_t BreakFilter;          /*!< Specifies the break input filter.
-                                      This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-  uint32_t AutomaticOutput;      /*!< TIM Automatic Output Enable state
-                                      This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+  uint32_t OffStateRunMode;      /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+
+  uint32_t OffStateIDLEMode;     /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+
+  uint32_t LockLevel;            /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */
+
+  uint32_t DeadTime;             /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+
+  uint32_t BreakState;           /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+
+  uint32_t BreakPolarity;        /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */
+
+  uint32_t BreakFilter;          /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+  uint32_t AutomaticOutput;      /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+
 } TIM_BreakDeadTimeConfigTypeDef;
 
 /**
@@ -294,6 +296,26 @@ typedef enum
   HAL_TIM_STATE_ERROR             = 0x04U     /*!< Reception process is ongoing                */
 } HAL_TIM_StateTypeDef;
 
+/**
+  * @brief  TIM Channel States definition
+  */
+typedef enum
+{
+  HAL_TIM_CHANNEL_STATE_RESET             = 0x00U,    /*!< TIM Channel initial state                         */
+  HAL_TIM_CHANNEL_STATE_READY             = 0x01U,    /*!< TIM Channel ready for use                         */
+  HAL_TIM_CHANNEL_STATE_BUSY              = 0x02U,    /*!< An internal process is ongoing on the TIM channel */
+} HAL_TIM_ChannelStateTypeDef;
+
+/**
+  * @brief  DMA Burst States definition
+  */
+typedef enum
+{
+  HAL_DMA_BURST_STATE_RESET             = 0x00U,    /*!< DMA Burst initial state */
+  HAL_DMA_BURST_STATE_READY             = 0x01U,    /*!< DMA Burst ready for use */
+  HAL_DMA_BURST_STATE_BUSY              = 0x02U,    /*!< Ongoing DMA Burst       */
+} HAL_TIM_DMABurstStateTypeDef;
+
 /**
   * @brief  HAL Active channel structures definition
   */
@@ -315,13 +337,16 @@ typedef struct __TIM_HandleTypeDef
 typedef struct
 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
 {
-  TIM_TypeDef                 *Instance;     /*!< Register base address             */
-  TIM_Base_InitTypeDef        Init;          /*!< TIM Time Base required parameters */
-  HAL_TIM_ActiveChannel       Channel;       /*!< Active channel                    */
-  DMA_HandleTypeDef           *hdma[7];      /*!< DMA Handlers array
-                                                  This array is accessed by a @ref DMA_Handle_index */
-  HAL_LockTypeDef             Lock;          /*!< Locking object                    */
-  __IO HAL_TIM_StateTypeDef   State;         /*!< TIM operation state               */
+  TIM_TypeDef                        *Instance;         /*!< Register base address                             */
+  TIM_Base_InitTypeDef               Init;              /*!< TIM Time Base required parameters                 */
+  HAL_TIM_ActiveChannel              Channel;           /*!< Active channel                                    */
+  DMA_HandleTypeDef                  *hdma[7];          /*!< DMA Handlers array
+                                                             This array is accessed by a @ref DMA_Handle_index */
+  HAL_LockTypeDef                    Lock;              /*!< Locking object                                    */
+  __IO HAL_TIM_StateTypeDef          State;             /*!< TIM operation state                               */
+  __IO HAL_TIM_ChannelStateTypeDef   ChannelState[4];   /*!< TIM channel operation state                       */
+  __IO HAL_TIM_ChannelStateTypeDef   ChannelNState[4];  /*!< TIM complementary channel operation state         */
+  __IO HAL_TIM_DMABurstStateTypeDef  DMABurstState;     /*!< DMA burst operation state                         */
 
 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
   void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim);              /*!< TIM Base Msp Init Callback                              */
@@ -360,34 +385,34 @@ typedef struct
   */
 typedef enum
 {
-   HAL_TIM_BASE_MSPINIT_CB_ID            = 0x00U    /*!< TIM Base MspInit Callback ID                              */
-  ,HAL_TIM_BASE_MSPDEINIT_CB_ID          = 0x01U    /*!< TIM Base MspDeInit Callback ID                            */
-  ,HAL_TIM_IC_MSPINIT_CB_ID              = 0x02U    /*!< TIM IC MspInit Callback ID                                */
-  ,HAL_TIM_IC_MSPDEINIT_CB_ID            = 0x03U    /*!< TIM IC MspDeInit Callback ID                              */
-  ,HAL_TIM_OC_MSPINIT_CB_ID              = 0x04U    /*!< TIM OC MspInit Callback ID                                */
-  ,HAL_TIM_OC_MSPDEINIT_CB_ID            = 0x05U    /*!< TIM OC MspDeInit Callback ID                              */
-  ,HAL_TIM_PWM_MSPINIT_CB_ID             = 0x06U    /*!< TIM PWM MspInit Callback ID                               */
-  ,HAL_TIM_PWM_MSPDEINIT_CB_ID           = 0x07U    /*!< TIM PWM MspDeInit Callback ID                             */
-  ,HAL_TIM_ONE_PULSE_MSPINIT_CB_ID       = 0x08U    /*!< TIM One Pulse MspInit Callback ID                         */
-  ,HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID     = 0x09U    /*!< TIM One Pulse MspDeInit Callback ID                       */
-  ,HAL_TIM_ENCODER_MSPINIT_CB_ID         = 0x0AU    /*!< TIM Encoder MspInit Callback ID                           */
-  ,HAL_TIM_ENCODER_MSPDEINIT_CB_ID       = 0x0BU    /*!< TIM Encoder MspDeInit Callback ID                         */
-  ,HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID     = 0x0CU    /*!< TIM Hall Sensor MspDeInit Callback ID                     */
-  ,HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID   = 0x0DU    /*!< TIM Hall Sensor MspDeInit Callback ID                     */
-  ,HAL_TIM_PERIOD_ELAPSED_CB_ID          = 0x0EU    /*!< TIM Period Elapsed Callback ID                             */
-  ,HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID     = 0x0FU    /*!< TIM Period Elapsed half complete Callback ID               */
-  ,HAL_TIM_TRIGGER_CB_ID                 = 0x10U    /*!< TIM Trigger Callback ID                                    */
-  ,HAL_TIM_TRIGGER_HALF_CB_ID            = 0x11U    /*!< TIM Trigger half complete Callback ID                      */
-
-  ,HAL_TIM_IC_CAPTURE_CB_ID              = 0x12U    /*!< TIM Input Capture Callback ID                              */
-  ,HAL_TIM_IC_CAPTURE_HALF_CB_ID         = 0x13U    /*!< TIM Input Capture half complete Callback ID                */
-  ,HAL_TIM_OC_DELAY_ELAPSED_CB_ID        = 0x14U    /*!< TIM Output Compare Delay Elapsed Callback ID               */
-  ,HAL_TIM_PWM_PULSE_FINISHED_CB_ID      = 0x15U    /*!< TIM PWM Pulse Finished Callback ID           */
-  ,HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U    /*!< TIM PWM Pulse Finished half complete Callback ID           */
-  ,HAL_TIM_ERROR_CB_ID                   = 0x17U    /*!< TIM Error Callback ID                                      */
-  ,HAL_TIM_COMMUTATION_CB_ID             = 0x18U    /*!< TIM Commutation Callback ID                                */
-  ,HAL_TIM_COMMUTATION_HALF_CB_ID        = 0x19U    /*!< TIM Commutation half complete Callback ID                  */
-  ,HAL_TIM_BREAK_CB_ID                   = 0x1AU    /*!< TIM Break Callback ID                                      */
+  HAL_TIM_BASE_MSPINIT_CB_ID              = 0x00U   /*!< TIM Base MspInit Callback ID                              */
+  , HAL_TIM_BASE_MSPDEINIT_CB_ID          = 0x01U   /*!< TIM Base MspDeInit Callback ID                            */
+  , HAL_TIM_IC_MSPINIT_CB_ID              = 0x02U   /*!< TIM IC MspInit Callback ID                                */
+  , HAL_TIM_IC_MSPDEINIT_CB_ID            = 0x03U   /*!< TIM IC MspDeInit Callback ID                              */
+  , HAL_TIM_OC_MSPINIT_CB_ID              = 0x04U   /*!< TIM OC MspInit Callback ID                                */
+  , HAL_TIM_OC_MSPDEINIT_CB_ID            = 0x05U   /*!< TIM OC MspDeInit Callback ID                              */
+  , HAL_TIM_PWM_MSPINIT_CB_ID             = 0x06U   /*!< TIM PWM MspInit Callback ID                               */
+  , HAL_TIM_PWM_MSPDEINIT_CB_ID           = 0x07U   /*!< TIM PWM MspDeInit Callback ID                             */
+  , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID       = 0x08U   /*!< TIM One Pulse MspInit Callback ID                         */
+  , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID     = 0x09U   /*!< TIM One Pulse MspDeInit Callback ID                       */
+  , HAL_TIM_ENCODER_MSPINIT_CB_ID         = 0x0AU   /*!< TIM Encoder MspInit Callback ID                           */
+  , HAL_TIM_ENCODER_MSPDEINIT_CB_ID       = 0x0BU   /*!< TIM Encoder MspDeInit Callback ID                         */
+  , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID     = 0x0CU   /*!< TIM Hall Sensor MspDeInit Callback ID                     */
+  , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID   = 0x0DU   /*!< TIM Hall Sensor MspDeInit Callback ID                     */
+  , HAL_TIM_PERIOD_ELAPSED_CB_ID          = 0x0EU   /*!< TIM Period Elapsed Callback ID                             */
+  , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID     = 0x0FU   /*!< TIM Period Elapsed half complete Callback ID               */
+  , HAL_TIM_TRIGGER_CB_ID                 = 0x10U   /*!< TIM Trigger Callback ID                                    */
+  , HAL_TIM_TRIGGER_HALF_CB_ID            = 0x11U   /*!< TIM Trigger half complete Callback ID                      */
+
+  , HAL_TIM_IC_CAPTURE_CB_ID              = 0x12U   /*!< TIM Input Capture Callback ID                              */
+  , HAL_TIM_IC_CAPTURE_HALF_CB_ID         = 0x13U   /*!< TIM Input Capture half complete Callback ID                */
+  , HAL_TIM_OC_DELAY_ELAPSED_CB_ID        = 0x14U   /*!< TIM Output Compare Delay Elapsed Callback ID               */
+  , HAL_TIM_PWM_PULSE_FINISHED_CB_ID      = 0x15U   /*!< TIM PWM Pulse Finished Callback ID           */
+  , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U   /*!< TIM PWM Pulse Finished half complete Callback ID           */
+  , HAL_TIM_ERROR_CB_ID                   = 0x17U   /*!< TIM Error Callback ID                                      */
+  , HAL_TIM_COMMUTATION_CB_ID             = 0x18U   /*!< TIM Commutation Callback ID                                */
+  , HAL_TIM_COMMUTATION_HALF_CB_ID        = 0x19U   /*!< TIM Commutation half complete Callback ID                  */
+  , HAL_TIM_BREAK_CB_ID                   = 0x1AU   /*!< TIM Break Callback ID                                      */
 } HAL_TIM_CallbackIDTypeDef;
 
 /**
@@ -605,10 +630,8 @@ typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim);  /*!< pointer to
 /** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
   * @{
   */
-#define TIM_ICSELECTION_DIRECTTI           TIM_CCMR1_CC1S_0                     /*!< TIM Input 1, 2, 3 or 4 is selected to be
-                                                                                     connected to IC1, IC2, IC3 or IC4, respectively */
-#define TIM_ICSELECTION_INDIRECTTI         TIM_CCMR1_CC1S_1                     /*!< TIM Input 1, 2, 3 or 4 is selected to be
-                                                                                     connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_DIRECTTI           TIM_CCMR1_CC1S_0                     /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI         TIM_CCMR1_CC1S_1                     /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */
 #define TIM_ICSELECTION_TRC                TIM_CCMR1_CC1S                       /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
 /**
   * @}
@@ -682,6 +705,15 @@ typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim);  /*!< pointer to
   * @}
   */
 
+/** @defgroup TIM_CC_DMA_Request CCx DMA request selection
+  * @{
+  */
+#define TIM_CCDMAREQUEST_CC                 0x00000000U                         /*!< CCx DMA request sent when capture or compare match event occurs */
+#define TIM_CCDMAREQUEST_UPDATE             TIM_CR2_CCDS                        /*!< CCx DMA requests sent when update event occurs */
+/**
+  * @}
+  */
+
 /** @defgroup TIM_Flag_definition TIM Flag Definition
   * @{
   */
@@ -716,16 +748,16 @@ typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim);  /*!< pointer to
 /** @defgroup TIM_Clock_Source TIM Clock Source
   * @{
   */
-#define TIM_CLOCKSOURCE_ETRMODE2    TIM_SMCR_ETPS_1      /*!< External clock source mode 2                          */
 #define TIM_CLOCKSOURCE_INTERNAL    TIM_SMCR_ETPS_0      /*!< Internal clock source                                 */
+#define TIM_CLOCKSOURCE_ETRMODE1    TIM_TS_ETRF          /*!< External clock source mode 1 (ETRF)                   */
+#define TIM_CLOCKSOURCE_ETRMODE2    TIM_SMCR_ETPS_1      /*!< External clock source mode 2                          */
+#define TIM_CLOCKSOURCE_TI1ED       TIM_TS_TI1F_ED       /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */
+#define TIM_CLOCKSOURCE_TI1         TIM_TS_TI1FP1        /*!< External clock source mode 1 (TTI1FP1)                */
+#define TIM_CLOCKSOURCE_TI2         TIM_TS_TI2FP2        /*!< External clock source mode 1 (TTI2FP2)                */
 #define TIM_CLOCKSOURCE_ITR0        TIM_TS_ITR0          /*!< External clock source mode 1 (ITR0)                   */
 #define TIM_CLOCKSOURCE_ITR1        TIM_TS_ITR1          /*!< External clock source mode 1 (ITR1)                   */
 #define TIM_CLOCKSOURCE_ITR2        TIM_TS_ITR2          /*!< External clock source mode 1 (ITR2)                   */
 #define TIM_CLOCKSOURCE_ITR3        TIM_TS_ITR3          /*!< External clock source mode 1 (ITR3)                   */
-#define TIM_CLOCKSOURCE_TI1ED       TIM_TS_TI1F_ED       /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */
-#define TIM_CLOCKSOURCE_TI1         TIM_TS_TI1FP1        /*!< External clock source mode 1 (TTI1FP1)                */
-#define TIM_CLOCKSOURCE_TI2         TIM_TS_TI2FP2        /*!< External clock source mode 1 (TTI2FP2)                */
-#define TIM_CLOCKSOURCE_ETRMODE1    TIM_TS_ETRF          /*!< External clock source mode 1 (ETRF)                   */
 /**
   * @}
   */
@@ -823,8 +855,7 @@ typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim);  /*!< pointer to
   * @{
   */
 #define TIM_AUTOMATICOUTPUT_DISABLE        0x00000000U                          /*!< MOE can be set only by software */
-#define TIM_AUTOMATICOUTPUT_ENABLE         TIM_BDTR_AOE                         /*!< MOE can be set by software or automatically at the next update event 
-                                                                                    (if none of the break inputs BRK and BRK2 is active) */
+#define TIM_AUTOMATICOUTPUT_ENABLE         TIM_BDTR_AOE                         /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */
 /**
   * @}
   */
@@ -931,24 +962,24 @@ typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim);  /*!< pointer to
 /** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
   * @{
   */
-#define TIM_DMABURSTLENGTH_1TRANSFER       0x00000000U                          /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA   */
-#define TIM_DMABURSTLENGTH_2TRANSFERS      0x00000100U                          /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
-#define TIM_DMABURSTLENGTH_3TRANSFERS      0x00000200U                          /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
-#define TIM_DMABURSTLENGTH_4TRANSFERS      0x00000300U                          /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
-#define TIM_DMABURSTLENGTH_5TRANSFERS      0x00000400U                          /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
-#define TIM_DMABURSTLENGTH_6TRANSFERS      0x00000500U                          /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
-#define TIM_DMABURSTLENGTH_7TRANSFERS      0x00000600U                          /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
-#define TIM_DMABURSTLENGTH_8TRANSFERS      0x00000700U                          /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
-#define TIM_DMABURSTLENGTH_9TRANSFERS      0x00000800U                          /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
-#define TIM_DMABURSTLENGTH_10TRANSFERS     0x00000900U                          /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_11TRANSFERS     0x00000A00U                          /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_12TRANSFERS     0x00000B00U                          /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_13TRANSFERS     0x00000C00U                          /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_14TRANSFERS     0x00000D00U                          /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_15TRANSFERS     0x00000E00U                          /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_16TRANSFERS     0x00000F00U                          /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_17TRANSFERS     0x00001000U                          /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_18TRANSFERS     0x00001100U                          /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_1TRANSFER       0x00000000U                          /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA   */
+#define TIM_DMABURSTLENGTH_2TRANSFERS      0x00000100U                          /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_3TRANSFERS      0x00000200U                          /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_4TRANSFERS      0x00000300U                          /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_5TRANSFERS      0x00000400U                          /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_6TRANSFERS      0x00000500U                          /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_7TRANSFERS      0x00000600U                          /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_8TRANSFERS      0x00000700U                          /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_9TRANSFERS      0x00000800U                          /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_10TRANSFERS     0x00000900U                          /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_11TRANSFERS     0x00000A00U                          /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_12TRANSFERS     0x00000B00U                          /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_13TRANSFERS     0x00000C00U                          /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_14TRANSFERS     0x00000D00U                          /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_15TRANSFERS     0x00000E00U                          /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_16TRANSFERS     0x00000F00U                          /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_17TRANSFERS     0x00001000U                          /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_18TRANSFERS     0x00001100U                          /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
 /**
   * @}
   */
@@ -993,25 +1024,45 @@ typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim);  /*!< pointer to
   * @retval None
   */
 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
-#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do {                                                        \
-                                                      (__HANDLE__)->State             = HAL_TIM_STATE_RESET; \
-                                                      (__HANDLE__)->Base_MspInitCallback         = NULL;     \
-                                                      (__HANDLE__)->Base_MspDeInitCallback       = NULL;     \
-                                                      (__HANDLE__)->IC_MspInitCallback           = NULL;     \
-                                                      (__HANDLE__)->IC_MspDeInitCallback         = NULL;     \
-                                                      (__HANDLE__)->OC_MspInitCallback           = NULL;     \
-                                                      (__HANDLE__)->OC_MspDeInitCallback         = NULL;     \
-                                                      (__HANDLE__)->PWM_MspInitCallback          = NULL;     \
-                                                      (__HANDLE__)->PWM_MspDeInitCallback        = NULL;     \
-                                                      (__HANDLE__)->OnePulse_MspInitCallback     = NULL;     \
-                                                      (__HANDLE__)->OnePulse_MspDeInitCallback   = NULL;     \
-                                                      (__HANDLE__)->Encoder_MspInitCallback      = NULL;     \
-                                                      (__HANDLE__)->Encoder_MspDeInitCallback    = NULL;     \
-                                                      (__HANDLE__)->HallSensor_MspInitCallback   = NULL;     \
-                                                      (__HANDLE__)->HallSensor_MspDeInitCallback = NULL;     \
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do {                                                               \
+                                                      (__HANDLE__)->State            = HAL_TIM_STATE_RESET;         \
+                                                      (__HANDLE__)->ChannelState[0]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelState[1]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelState[2]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelState[3]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->DMABurstState    = HAL_DMA_BURST_STATE_RESET;   \
+                                                      (__HANDLE__)->Base_MspInitCallback         = NULL;            \
+                                                      (__HANDLE__)->Base_MspDeInitCallback       = NULL;            \
+                                                      (__HANDLE__)->IC_MspInitCallback           = NULL;            \
+                                                      (__HANDLE__)->IC_MspDeInitCallback         = NULL;            \
+                                                      (__HANDLE__)->OC_MspInitCallback           = NULL;            \
+                                                      (__HANDLE__)->OC_MspDeInitCallback         = NULL;            \
+                                                      (__HANDLE__)->PWM_MspInitCallback          = NULL;            \
+                                                      (__HANDLE__)->PWM_MspDeInitCallback        = NULL;            \
+                                                      (__HANDLE__)->OnePulse_MspInitCallback     = NULL;            \
+                                                      (__HANDLE__)->OnePulse_MspDeInitCallback   = NULL;            \
+                                                      (__HANDLE__)->Encoder_MspInitCallback      = NULL;            \
+                                                      (__HANDLE__)->Encoder_MspDeInitCallback    = NULL;            \
+                                                      (__HANDLE__)->HallSensor_MspInitCallback   = NULL;            \
+                                                      (__HANDLE__)->HallSensor_MspDeInitCallback = NULL;            \
                                                      } while(0)
 #else
-#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do {                                                               \
+                                                      (__HANDLE__)->State            = HAL_TIM_STATE_RESET;         \
+                                                      (__HANDLE__)->ChannelState[0]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelState[1]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelState[2]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelState[3]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->DMABurstState    = HAL_DMA_BURST_STATE_RESET;   \
+                                                     } while(0)
 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
 
 /**
@@ -1048,7 +1099,8 @@ typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim);  /*!< pointer to
   * @brief  Disable the TIM main Output.
   * @param  __HANDLE__ TIM handle
   * @retval None
-  * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled
+  * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been
+  *       disabled
   */
 #define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
   do { \
@@ -1209,8 +1261,8 @@ typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim);  /*!< pointer to
   * @brief  Indicates whether or not the TIM Counter is used as downcounter.
   * @param  __HANDLE__ TIM handle.
   * @retval False (Counter used as upcounter) or True (Counter used as downcounter)
-  * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder
-mode.
+  * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode
+  *       or Encoder mode.
   */
 #define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__)    (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
 
@@ -1284,7 +1336,8 @@ mode.
 #define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__)  ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
 
 /**
-  * @brief  Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function.
+  * @brief  Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel()
+  *         function.
   * @param  __HANDLE__ TIM handle.
   * @param  __CHANNEL__ TIM Channels to be configured.
   *          This parameter can be one of the following values:
@@ -1482,6 +1535,17 @@ mode.
     TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
   }while(0)
 
+/** @brief  Select the Capture/compare DMA request source.
+  * @param  __HANDLE__ specifies the TIM Handle.
+  * @param  __CCDMA__ specifies Capture/compare DMA request source
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event
+  *            @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event
+  * @retval None
+  */
+#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__)    \
+  MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__))
+
 /**
   * @}
   */
@@ -1595,15 +1659,15 @@ mode.
                                                     ((__CHANNEL__) == TIM_CHANNEL_3))
 
 #define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \
                                        ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \
-                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0)     || \
-                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1)     || \
-                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2)     || \
-                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)     || \
                                        ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED)    || \
                                        ((__CLOCK__) == TIM_CLOCKSOURCE_TI1)      || \
                                        ((__CLOCK__) == TIM_CLOCKSOURCE_TI2)      || \
-                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1))
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0)     || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1)     || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2)     || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3))
 
 #define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED)    || \
                                             ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \
@@ -1679,13 +1743,13 @@ mode.
                                    ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE)      || \
                                    ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE))
 
-#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
-                                                 ((__SELECTION__) == TIM_TS_ITR1) || \
-                                                 ((__SELECTION__) == TIM_TS_ITR2) || \
-                                                 ((__SELECTION__) == TIM_TS_ITR3) || \
+#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0)    || \
+                                                 ((__SELECTION__) == TIM_TS_ITR1)    || \
+                                                 ((__SELECTION__) == TIM_TS_ITR2)    || \
+                                                 ((__SELECTION__) == TIM_TS_ITR3)    || \
                                                  ((__SELECTION__) == TIM_TS_TI1F_ED) || \
-                                                 ((__SELECTION__) == TIM_TS_TI1FP1) || \
-                                                 ((__SELECTION__) == TIM_TS_TI2FP2) || \
+                                                 ((__SELECTION__) == TIM_TS_TI1FP1)  || \
+                                                 ((__SELECTION__) == TIM_TS_TI2FP2)  || \
                                                  ((__SELECTION__) == TIM_TS_ETRF))
 
 #define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
@@ -1710,15 +1774,15 @@ mode.
 #define IS_TIM_TI1SELECTION(__TI1SELECTION__)  (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \
                                                 ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION))
 
-#define IS_TIM_DMA_LENGTH(__LENGTH__)      (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \
-                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
-                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
-                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
-                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
-                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
-                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
-                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
-                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
+#define IS_TIM_DMA_LENGTH(__LENGTH__)      (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER)   || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS)  || \
                                             ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
                                             ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
                                             ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
@@ -1729,6 +1793,8 @@ mode.
                                             ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
                                             ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS))
 
+#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U))
+
 #define IS_TIM_IC_FILTER(__ICFILTER__)   ((__ICFILTER__) <= 0xFU)
 
 #define IS_TIM_DEADTIME(__DEADTIME__)    ((__DEADTIME__) <= 0xFFU)
@@ -1759,6 +1825,48 @@ mode.
    ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
    ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP)))
 
+#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\
+   (__HANDLE__)->ChannelState[3])
+
+#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\
+   ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__)))
+
+#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__,  __CHANNEL_STATE__) do { \
+                                                                       (__HANDLE__)->ChannelState[0]  = (__CHANNEL_STATE__);  \
+                                                                       (__HANDLE__)->ChannelState[1]  = (__CHANNEL_STATE__);  \
+                                                                       (__HANDLE__)->ChannelState[2]  = (__CHANNEL_STATE__);  \
+                                                                       (__HANDLE__)->ChannelState[3]  = (__CHANNEL_STATE__);  \
+                                                                     } while(0)
+
+#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\
+   (__HANDLE__)->ChannelNState[3])
+
+#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\
+   ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__)))
+
+#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__,  __CHANNEL_STATE__) do { \
+                                                                         (__HANDLE__)->ChannelNState[0] = \
+                                                                         (__CHANNEL_STATE__);  \
+                                                                         (__HANDLE__)->ChannelNState[1] = \
+                                                                         (__CHANNEL_STATE__);  \
+                                                                         (__HANDLE__)->ChannelNState[2] = \
+                                                                         (__CHANNEL_STATE__);  \
+                                                                         (__HANDLE__)->ChannelNState[3] = \
+                                                                         (__CHANNEL_STATE__);  \
+                                                                       } while(0)
+
 /**
   * @}
   */
@@ -1930,9 +2038,15 @@ HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveC
 HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig);
 HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
                                               uint32_t BurstRequestSrc, uint32_t  *BurstBuffer, uint32_t  BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+                                                   uint32_t BurstRequestSrc, uint32_t *BurstBuffer,
+                                                   uint32_t BurstLength,  uint32_t DataLength);
 HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
 HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
                                              uint32_t BurstRequestSrc, uint32_t  *BurstBuffer, uint32_t  BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+                                                  uint32_t BurstRequestSrc, uint32_t  *BurstBuffer,
+                                                  uint32_t  BurstLength, uint32_t  DataLength);
 HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
 HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
 uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
@@ -1978,6 +2092,11 @@ HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
 HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
 HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
 HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+/* Peripheral Channel state functions  ************************************************/
+HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim);
+HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim,  uint32_t Channel);
+HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim);
 /**
   * @}
   */
@@ -1997,7 +2116,6 @@ void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
 void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler,
                        uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
 
-void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
 void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma);
 void TIM_DMAError(DMA_HandleTypeDef *hdma);
 void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
@@ -2026,5 +2144,3 @@ void TIM_ResetCallback(TIM_HandleTypeDef *htim);
 #endif
 
 #endif /* STM32F4xx_HAL_TIM_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -129,66 +128,66 @@ typedef struct
   * @{
   */
 #if defined(SPDIFRX)
-#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                       \
-        ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)      || \
-                                    ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
-                                    ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
-         (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
-                                    ((TIM_REMAP) == TIM_TIM5_LSI)            || \
-                                    ((TIM_REMAP) == TIM_TIM5_LSE)            || \
-                                    ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
-         (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
-                                    ((TIM_REMAP) == TIM_TIM11_SPDIFRX)       || \
-                                    ((TIM_REMAP) == TIM_TIM11_HSE))))
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                 \
+  ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
+   (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                              ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                              ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                              ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+   (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                              ((TIM_REMAP) == TIM_TIM11_SPDIFRX)       || \
+                              ((TIM_REMAP) == TIM_TIM11_HSE))))
 #elif defined(TIM2)
 #if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP)
-#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                       \
-        ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)      || \
-                                    ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
-                                    ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
-         (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
-                                    ((TIM_REMAP) == TIM_TIM5_LSI)            || \
-                                    ((TIM_REMAP) == TIM_TIM5_LSE)            || \
-                                    ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
-         (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
-                                    ((TIM_REMAP) == TIM_TIM11_HSE)))         || \
-         (((INSTANCE) == TIM1)  && (((TIM_REMAP) == TIM_TIM1_TIM3_TRGO)      || \
-                                    ((TIM_REMAP) == TIM_TIM1_LPTIM)))        || \
-         (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_TIM3_TRGO)      || \
-                                    ((TIM_REMAP) == TIM_TIM5_LPTIM)))        || \
-         (((INSTANCE) == TIM9)  && (((TIM_REMAP) == TIM_TIM9_TIM3_TRGO)      || \
-                                    ((TIM_REMAP) == TIM_TIM9_LPTIM))))
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                 \
+  ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
+   (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                              ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                              ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                              ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+   (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                              ((TIM_REMAP) == TIM_TIM11_HSE)))         || \
+   (((INSTANCE) == TIM1)  && (((TIM_REMAP) == TIM_TIM1_TIM3_TRGO)      || \
+                              ((TIM_REMAP) == TIM_TIM1_LPTIM)))        || \
+   (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_TIM3_TRGO)      || \
+                              ((TIM_REMAP) == TIM_TIM5_LPTIM)))        || \
+   (((INSTANCE) == TIM9)  && (((TIM_REMAP) == TIM_TIM9_TIM3_TRGO)      || \
+                              ((TIM_REMAP) == TIM_TIM9_LPTIM))))
 #elif defined(TIM8)
-#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                       \
-        ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)      || \
-                                    ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
-                                    ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
-         (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
-                                    ((TIM_REMAP) == TIM_TIM5_LSI)            || \
-                                    ((TIM_REMAP) == TIM_TIM5_LSE)            || \
-                                    ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
-         (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
-                                    ((TIM_REMAP) == TIM_TIM11_HSE))))
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                 \
+  ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
+   (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                              ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                              ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                              ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+   (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                              ((TIM_REMAP) == TIM_TIM11_HSE))))
 #else
-#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                       \
-        ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_ETH_PTP)        || \
-                                    ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
-                                    ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
-         (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
-                                    ((TIM_REMAP) == TIM_TIM5_LSI)            || \
-                                    ((TIM_REMAP) == TIM_TIM5_LSE)            || \
-                                    ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
-         (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
-                                    ((TIM_REMAP) == TIM_TIM11_HSE))))
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                 \
+  ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_ETH_PTP)        || \
+                              ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
+   (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                              ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                              ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                              ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+   (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                              ((TIM_REMAP) == TIM_TIM11_HSE))))
 #endif /* LPTIM_OR_TIM1_ITR2_RMP &&  LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */
 #else
-#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                       \
-        ((((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
-                                    ((TIM_REMAP) == TIM_TIM5_LSI)            || \
-                                    ((TIM_REMAP) == TIM_TIM5_LSE)            || \
-                                    ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
-         (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
-                                    ((TIM_REMAP) == TIM_TIM11_HSE))))
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                 \
+  ((((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                              ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                              ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                              ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+   (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                              ((TIM_REMAP) == TIM_TIM11_HSE))))
 #endif /* SPDIFRX */
 
 /**
@@ -318,6 +317,7 @@ void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
   */
 /* Extended Peripheral State functions  ***************************************/
 HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim,  uint32_t ChannelN);
 /**
   * @}
   */
@@ -328,7 +328,7 @@ HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
 /* End of exported functions -------------------------------------------------*/
 
 /* Private functions----------------------------------------------------------*/
-/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
+/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions
   * @{
   */
 void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
@@ -352,5 +352,3 @@ void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
 
 
 #endif /* STM32F4xx_HAL_TIM_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -88,7 +87,7 @@ typedef struct
   *             11 : Error
   *          b5     Peripheral initialization status
   *             0  : Reset (Peripheral not initialized)
-  *             1  : Init done (Peripheral not initialized. HAL UART Init function already called)
+  *             1  : Init done (Peripheral initialized. HAL UART Init function already called)
   *          b4-b3  (not used)
   *             xx : Should be set to 00
   *          b2     Intrinsic process state
@@ -105,7 +104,7 @@ typedef struct
   *             xx : Should be set to 00
   *          b5     Peripheral initialization status
   *             0  : Reset (Peripheral not initialized)
-  *             1  : Init done (Peripheral not initialized)
+  *             1  : Init done (Peripheral initialized)
   *          b4-b2  (not used)
   *            xxx : Should be set to 000
   *          b1     Rx state
@@ -135,6 +134,15 @@ typedef enum
                                                    Value is allowed for gState only */
 } HAL_UART_StateTypeDef;
 
+/**
+  * @brief HAL UART Reception type definition
+  * @note  HAL UART Reception type value aims to identify which type of Reception is ongoing.
+  *        It is expected to admit following values :
+  *           HAL_UART_RECEPTION_STANDARD         = 0x00U,
+  *           HAL_UART_RECEPTION_TOIDLE           = 0x01U,
+  */
+typedef uint32_t HAL_UART_RxTypeTypeDef;
+
 /**
   * @brief  UART handle Structure definition
   */
@@ -144,7 +152,7 @@ typedef struct __UART_HandleTypeDef
 
   UART_InitTypeDef              Init;             /*!< UART communication parameters      */
 
-  uint8_t                       *pTxBuffPtr;      /*!< Pointer to UART Tx transfer Buffer */
+  const uint8_t                 *pTxBuffPtr;      /*!< Pointer to UART Tx transfer Buffer */
 
   uint16_t                      TxXferSize;       /*!< UART Tx Transfer size              */
 
@@ -156,6 +164,8 @@ typedef struct __UART_HandleTypeDef
 
   __IO uint16_t                 RxXferCount;      /*!< UART Rx Transfer Counter           */
 
+  __IO HAL_UART_RxTypeTypeDef ReceptionType;      /*!< Type of ongoing reception          */
+
   DMA_HandleTypeDef             *hdmatx;          /*!< UART Tx DMA Handle parameters      */
 
   DMA_HandleTypeDef             *hdmarx;          /*!< UART Rx DMA Handle parameters      */
@@ -181,6 +191,7 @@ typedef struct __UART_HandleTypeDef
   void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */
   void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart);  /*!< UART Abort Receive Complete Callback  */
   void (* WakeupCallback)(struct __UART_HandleTypeDef *huart);            /*!< UART Wakeup Callback                  */
+  void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback     */
 
   void (* MspInitCallback)(struct __UART_HandleTypeDef *huart);           /*!< UART Msp Init callback                */
   void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart);         /*!< UART Msp DeInit callback              */
@@ -213,6 +224,7 @@ typedef enum
   * @brief  HAL UART Callback pointer definition
   */
 typedef  void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart);  /*!< pointer to an UART callback function */
+typedef  void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos);   /*!< pointer to a UART Rx Event specific callback function */
 
 #endif /* USE_HAL_UART_REGISTER_CALLBACKS */
 
@@ -369,6 +381,15 @@ typedef  void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart);  /*!< pointer
   * @}
   */
 
+/** @defgroup UART_RECEPTION_TYPE_Values  UART Reception type values
+  * @{
+  */
+#define HAL_UART_RECEPTION_STANDARD          (0x00000000U)             /*!< Standard reception                       */
+#define HAL_UART_RECEPTION_TOIDLE            (0x00000001U)             /*!< Reception till completion or IDLE event  */
+/**
+  * @}
+  */
+
 /**
   * @}
   */
@@ -551,7 +572,7 @@ typedef  void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart);  /*!< pointer
   * @retval The new state of __IT__ (TRUE or FALSE).
   */
 #define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == UART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == UART_CR2_REG_INDEX)? \
-                                                      (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
+                                                       (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
 
 /** @brief  Enable CTS flow control
   * @note   This macro allows to enable CTS hardware flow control for a given UART instance,
@@ -569,7 +590,7 @@ typedef  void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart);  /*!< pointer
   */
 #define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__)        \
   do{                                                      \
-    SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE);  \
+    ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE);  \
     (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE;        \
   } while(0U)
 
@@ -589,7 +610,7 @@ typedef  void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart);  /*!< pointer
   */
 #define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__)        \
   do{                                                       \
-    CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+    ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
     (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE);      \
   } while(0U)
 
@@ -609,7 +630,7 @@ typedef  void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart);  /*!< pointer
   */
 #define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__)       \
   do{                                                     \
-    SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+    ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
     (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE;       \
   } while(0U)
 
@@ -629,7 +650,7 @@ typedef  void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart);  /*!< pointer
   */
 #define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__)       \
   do{                                                      \
-    CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+    ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
     (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE);     \
   } while(0U)
 
@@ -643,7 +664,8 @@ typedef  void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart);  /*!< pointer
   * @param  __HANDLE__ specifies the UART Handle.
   * @retval None
   */
-#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\
+                                                       &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
 
 /** @brief  Enable UART
   * @param  __HANDLE__ specifies the UART Handle.
@@ -680,8 +702,12 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
 
 /* Callbacks Register/UnRegister functions  ***********************************/
 #if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, pUART_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID,
+                                            pUART_CallbackTypeDef pCallback);
 HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart);
 #endif /* USE_HAL_UART_REGISTER_CALLBACKS */
 
 /**
@@ -693,15 +719,21 @@ HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UAR
   */
 
 /* IO operation functions *******************************************************/
-HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout);
 HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
 HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
 HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen,
+                                           uint32_t Timeout);
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+
 /* Transfer Abort functions */
 HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart);
 HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart);
@@ -720,6 +752,8 @@ void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart);
 void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart);
 void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart);
 
+void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size);
+
 /**
   * @}
   */
@@ -800,7 +834,8 @@ uint32_t              HAL_UART_GetError(UART_HandleTypeDef *huart);
 
 #define UART_DIV_SAMPLING16(_PCLK_, _BAUD_)            ((uint32_t)((((uint64_t)(_PCLK_))*25U)/(4U*((uint64_t)(_BAUD_)))))
 #define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_)        (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U)
-#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_)        ((((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U) + 50U) / 100U)
+#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_)        ((((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U)\
+                                                         + 50U) / 100U)
 /* UART BRR = mantissa + overflow + fraction
             = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
 #define UART_BRR_SAMPLING16(_PCLK_, _BAUD_)            ((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \
@@ -809,7 +844,8 @@ uint32_t              HAL_UART_GetError(UART_HandleTypeDef *huart);
 
 #define UART_DIV_SAMPLING8(_PCLK_, _BAUD_)             ((uint32_t)((((uint64_t)(_PCLK_))*25U)/(2U*((uint64_t)(_BAUD_)))))
 #define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_)         (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U)
-#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_)         ((((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U) + 50U) / 100U)
+#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_)         ((((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U)\
+                                                         + 50U) / 100U)
 /* UART BRR = mantissa + overflow + fraction
             = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */
 #define UART_BRR_SAMPLING8(_PCLK_, _BAUD_)             ((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \
@@ -825,6 +861,9 @@ uint32_t              HAL_UART_GetError(UART_HandleTypeDef *huart);
   * @{
   */
 
+HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+
 /**
   * @}
   */
@@ -843,4 +882,3 @@ uint32_t              HAL_UART_GetError(UART_HandleTypeDef *huart);
 
 #endif /* __STM32F4xx_HAL_UART_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_adc.h

@@ -0,0 +1,4779 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_ll_adc.h
+  * @author  MCD Application Team
+  * @brief   Header file of ADC LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_ADC_H
+#define __STM32F4xx_LL_ADC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+
+/** @addtogroup STM32F4xx_LL_Driver
+  * @{
+  */
+
+#if defined (ADC1) || defined (ADC2) || defined (ADC3)
+
+/** @defgroup ADC_LL ADC
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup ADC_LL_Private_Constants ADC Private Constants
+  * @{
+  */
+
+/* Internal mask for ADC group regular sequencer:                             */
+/* To select into literal LL_ADC_REG_RANK_x the relevant bits for:            */
+/* - sequencer register offset                                                */
+/* - sequencer rank bits position into the selected register                  */
+
+/* Internal register offset for ADC group regular sequencer configuration */
+/* (offset placed into a spare area of literal definition) */
+#define ADC_SQR1_REGOFFSET                 0x00000000UL
+#define ADC_SQR2_REGOFFSET                 0x00000100UL
+#define ADC_SQR3_REGOFFSET                 0x00000200UL
+#define ADC_SQR4_REGOFFSET                 0x00000300UL
+
+#define ADC_REG_SQRX_REGOFFSET_MASK        (ADC_SQR1_REGOFFSET | ADC_SQR2_REGOFFSET | ADC_SQR3_REGOFFSET | ADC_SQR4_REGOFFSET)
+#define ADC_REG_RANK_ID_SQRX_MASK          (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0)
+
+/* Definition of ADC group regular sequencer bits information to be inserted  */
+/* into ADC group regular sequencer ranks literals definition.                */
+#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS  ( 0UL) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ1) */
+#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS  ( 5UL) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ2) */
+#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS  (10UL) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ3) */
+#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS  (15UL) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ4) */
+#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS  (20UL) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ5) */
+#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS  (25UL) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ6) */
+#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS  ( 0UL) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ7) */
+#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS  ( 5UL) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ8) */
+#define ADC_REG_RANK_9_SQRX_BITOFFSET_POS  (10UL) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ9) */
+#define ADC_REG_RANK_10_SQRX_BITOFFSET_POS (15UL) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ10) */
+#define ADC_REG_RANK_11_SQRX_BITOFFSET_POS (20UL) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ11) */
+#define ADC_REG_RANK_12_SQRX_BITOFFSET_POS (25UL) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ12) */
+#define ADC_REG_RANK_13_SQRX_BITOFFSET_POS ( 0UL) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ13) */
+#define ADC_REG_RANK_14_SQRX_BITOFFSET_POS ( 5UL) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ14) */
+#define ADC_REG_RANK_15_SQRX_BITOFFSET_POS (10UL) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ15) */
+#define ADC_REG_RANK_16_SQRX_BITOFFSET_POS (15UL) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ16) */
+
+/* Internal mask for ADC group injected sequencer:                            */
+/* To select into literal LL_ADC_INJ_RANK_x the relevant bits for:            */
+/* - data register offset                                                     */
+/* - offset register offset                                                   */
+/* - sequencer rank bits position into the selected register                  */
+
+/* Internal register offset for ADC group injected data register */
+/* (offset placed into a spare area of literal definition) */
+#define ADC_JDR1_REGOFFSET                 0x00000000UL
+#define ADC_JDR2_REGOFFSET                 0x00000100UL
+#define ADC_JDR3_REGOFFSET                 0x00000200UL
+#define ADC_JDR4_REGOFFSET                 0x00000300UL
+
+/* Internal register offset for ADC group injected offset configuration */
+/* (offset placed into a spare area of literal definition) */
+#define ADC_JOFR1_REGOFFSET                0x00000000UL
+#define ADC_JOFR2_REGOFFSET                0x00001000UL
+#define ADC_JOFR3_REGOFFSET                0x00002000UL
+#define ADC_JOFR4_REGOFFSET                0x00003000UL
+
+#define ADC_INJ_JDRX_REGOFFSET_MASK        (ADC_JDR1_REGOFFSET | ADC_JDR2_REGOFFSET | ADC_JDR3_REGOFFSET | ADC_JDR4_REGOFFSET)
+#define ADC_INJ_JOFRX_REGOFFSET_MASK       (ADC_JOFR1_REGOFFSET | ADC_JOFR2_REGOFFSET | ADC_JOFR3_REGOFFSET | ADC_JOFR4_REGOFFSET)
+#define ADC_INJ_RANK_ID_JSQR_MASK          (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0)
+
+/* Internal mask for ADC group regular trigger:                               */
+/* To select into literal LL_ADC_REG_TRIG_x the relevant bits for:            */
+/* - regular trigger source                                                   */
+/* - regular trigger edge                                                     */
+#define ADC_REG_TRIG_EXT_EDGE_DEFAULT       (ADC_CR2_EXTEN_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value) */
+
+/* Mask containing trigger source masks for each of possible                  */
+/* trigger edge selection duplicated with shifts [0; 4; 8; 12]                */
+/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}.        */
+#define ADC_REG_TRIG_SOURCE_MASK            (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CR2_EXTSEL) >> (4UL * 0UL)) | \
+                                             ((ADC_CR2_EXTSEL)                            >> (4UL * 1UL)) | \
+                                             ((ADC_CR2_EXTSEL)                            >> (4UL * 2UL)) | \
+                                             ((ADC_CR2_EXTSEL)                            >> (4UL * 3UL)))
+
+/* Mask containing trigger edge masks for each of possible                    */
+/* trigger edge selection duplicated with shifts [0; 4; 8; 12]                */
+/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}.        */
+#define ADC_REG_TRIG_EDGE_MASK              (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CR2_EXTEN) >> (4UL * 0UL)) | \
+                                             ((ADC_REG_TRIG_EXT_EDGE_DEFAULT)            >> (4UL * 1UL)) | \
+                                             ((ADC_REG_TRIG_EXT_EDGE_DEFAULT)            >> (4UL * 2UL)) | \
+                                             ((ADC_REG_TRIG_EXT_EDGE_DEFAULT)            >> (4UL * 3UL)))
+
+/* Definition of ADC group regular trigger bits information.                  */
+#define ADC_REG_TRIG_EXTSEL_BITOFFSET_POS  (24UL) /* Value equivalent to POSITION_VAL(ADC_CR2_EXTSEL) */
+#define ADC_REG_TRIG_EXTEN_BITOFFSET_POS   (28UL) /* Value equivalent to POSITION_VAL(ADC_CR2_EXTEN) */
+
+
+
+/* Internal mask for ADC group injected trigger:                              */
+/* To select into literal LL_ADC_INJ_TRIG_x the relevant bits for:            */
+/* - injected trigger source                                                  */
+/* - injected trigger edge                                                    */
+#define ADC_INJ_TRIG_EXT_EDGE_DEFAULT      (ADC_CR2_JEXTEN_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value) */
+
+/* Mask containing trigger source masks for each of possible                  */
+/* trigger edge selection duplicated with shifts [0; 4; 8; 12]                */
+/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}.        */
+#define ADC_INJ_TRIG_SOURCE_MASK            (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CR2_JEXTSEL) >> (4UL * 0UL)) | \
+                                             ((ADC_CR2_JEXTSEL)                            >> (4UL * 1UL)) | \
+                                             ((ADC_CR2_JEXTSEL)                            >> (4UL * 2UL)) | \
+                                             ((ADC_CR2_JEXTSEL)                            >> (4UL * 3UL)))
+
+/* Mask containing trigger edge masks for each of possible                    */
+/* trigger edge selection duplicated with shifts [0; 4; 8; 12]                */
+/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}.        */
+#define ADC_INJ_TRIG_EDGE_MASK              (((LL_ADC_INJ_TRIG_SOFTWARE & ADC_CR2_JEXTEN) >> (4UL * 0UL)) | \
+                                             ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT)             >> (4UL * 1UL)) | \
+                                             ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT)             >> (4UL * 2UL)) | \
+                                             ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT)             >> (4UL * 3UL)))
+
+/* Definition of ADC group injected trigger bits information.                 */
+#define ADC_INJ_TRIG_EXTSEL_BITOFFSET_POS  (16UL) /* Value equivalent to POSITION_VAL(ADC_CR2_JEXTSEL) */
+#define ADC_INJ_TRIG_EXTEN_BITOFFSET_POS   (20UL) /* Value equivalent to POSITION_VAL(ADC_CR2_JEXTEN) */
+
+/* Internal mask for ADC channel:                                             */
+/* To select into literal LL_ADC_CHANNEL_x the relevant bits for:             */
+/* - channel identifier defined by number                                     */
+/* - channel differentiation between external channels (connected to          */
+/*   GPIO pins) and internal channels (connected to internal paths)           */
+/* - channel sampling time defined by SMPRx register offset                   */
+/*   and SMPx bits positions into SMPRx register                              */
+#define ADC_CHANNEL_ID_NUMBER_MASK         (ADC_CR1_AWDCH)
+#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS ( 0UL)/* Value equivalent to POSITION_VAL(ADC_CHANNEL_ID_NUMBER_MASK) */
+#define ADC_CHANNEL_ID_MASK                (ADC_CHANNEL_ID_NUMBER_MASK | ADC_CHANNEL_ID_INTERNAL_CH_MASK)
+/* Equivalent mask of ADC_CHANNEL_NUMBER_MASK aligned on register LSB (bit 0) */
+#define ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 0x0000001FU /* Equivalent to shift: (ADC_CHANNEL_NUMBER_MASK >> POSITION_VAL(ADC_CHANNEL_NUMBER_MASK)) */
+
+/* Channel differentiation between external and internal channels */
+#define ADC_CHANNEL_ID_INTERNAL_CH         0x80000000UL   /* Marker of internal channel */
+#define ADC_CHANNEL_ID_INTERNAL_CH_2       0x40000000UL   /* Marker of internal channel for other ADC instances, in case of different ADC internal channels mapped on same channel number on different ADC instances */
+#define ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT 0x10000000U  /* Dummy bit for driver internal usage, not used in ADC channel setting registers CR1 or SQRx */
+#define ADC_CHANNEL_ID_INTERNAL_CH_MASK    (ADC_CHANNEL_ID_INTERNAL_CH | ADC_CHANNEL_ID_INTERNAL_CH_2 | ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT)
+
+/* Internal register offset for ADC channel sampling time configuration */
+/* (offset placed into a spare area of literal definition) */
+#define ADC_SMPR1_REGOFFSET                0x00000000UL
+#define ADC_SMPR2_REGOFFSET                0x02000000UL
+#define ADC_CHANNEL_SMPRX_REGOFFSET_MASK   (ADC_SMPR1_REGOFFSET | ADC_SMPR2_REGOFFSET)
+
+#define ADC_CHANNEL_SMPx_BITOFFSET_MASK    0x01F00000UL
+#define ADC_CHANNEL_SMPx_BITOFFSET_POS     (20UL)           /* Value equivalent to POSITION_VAL(ADC_CHANNEL_SMPx_BITOFFSET_MASK) */
+
+/* Definition of channels ID number information to be inserted into           */
+/* channels literals definition.                                              */
+#define ADC_CHANNEL_0_NUMBER               0x00000000UL
+#define ADC_CHANNEL_1_NUMBER               (                                                                        ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_2_NUMBER               (                                                      ADC_CR1_AWDCH_1                  )
+#define ADC_CHANNEL_3_NUMBER               (                                                      ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_4_NUMBER               (                                    ADC_CR1_AWDCH_2                                    )
+#define ADC_CHANNEL_5_NUMBER               (                                    ADC_CR1_AWDCH_2                   | ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_6_NUMBER               (                                    ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1                  )
+#define ADC_CHANNEL_7_NUMBER               (                                    ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_8_NUMBER               (                  ADC_CR1_AWDCH_3                                                      )
+#define ADC_CHANNEL_9_NUMBER               (                  ADC_CR1_AWDCH_3                                     | ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_10_NUMBER              (                  ADC_CR1_AWDCH_3                   | ADC_CR1_AWDCH_1                  )
+#define ADC_CHANNEL_11_NUMBER              (                  ADC_CR1_AWDCH_3                   | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_12_NUMBER              (                  ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2                                    )
+#define ADC_CHANNEL_13_NUMBER              (                  ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2                   | ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_14_NUMBER              (                  ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1                  )
+#define ADC_CHANNEL_15_NUMBER              (                  ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_16_NUMBER              (ADC_CR1_AWDCH_4                                                                        )
+#define ADC_CHANNEL_17_NUMBER              (ADC_CR1_AWDCH_4                                                       | ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_18_NUMBER              (ADC_CR1_AWDCH_4                                     | ADC_CR1_AWDCH_1                  )
+
+/* Definition of channels sampling time information to be inserted into       */
+/* channels literals definition.                                              */
+#define ADC_CHANNEL_0_SMP                  (ADC_SMPR2_REGOFFSET | (( 0UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP0) */
+#define ADC_CHANNEL_1_SMP                  (ADC_SMPR2_REGOFFSET | (( 3UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP1) */
+#define ADC_CHANNEL_2_SMP                  (ADC_SMPR2_REGOFFSET | (( 6UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP2) */
+#define ADC_CHANNEL_3_SMP                  (ADC_SMPR2_REGOFFSET | (( 9UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP3) */
+#define ADC_CHANNEL_4_SMP                  (ADC_SMPR2_REGOFFSET | ((12UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP4) */
+#define ADC_CHANNEL_5_SMP                  (ADC_SMPR2_REGOFFSET | ((15UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP5) */
+#define ADC_CHANNEL_6_SMP                  (ADC_SMPR2_REGOFFSET | ((18UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP6) */
+#define ADC_CHANNEL_7_SMP                  (ADC_SMPR2_REGOFFSET | ((21UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP7) */
+#define ADC_CHANNEL_8_SMP                  (ADC_SMPR2_REGOFFSET | ((24UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP8) */
+#define ADC_CHANNEL_9_SMP                  (ADC_SMPR2_REGOFFSET | ((27UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP9) */
+#define ADC_CHANNEL_10_SMP                 (ADC_SMPR1_REGOFFSET | (( 0UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP10) */
+#define ADC_CHANNEL_11_SMP                 (ADC_SMPR1_REGOFFSET | (( 3UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP11) */
+#define ADC_CHANNEL_12_SMP                 (ADC_SMPR1_REGOFFSET | (( 6UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP12) */
+#define ADC_CHANNEL_13_SMP                 (ADC_SMPR1_REGOFFSET | (( 9UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP13) */
+#define ADC_CHANNEL_14_SMP                 (ADC_SMPR1_REGOFFSET | ((12UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP14) */
+#define ADC_CHANNEL_15_SMP                 (ADC_SMPR1_REGOFFSET | ((15UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP15) */
+#define ADC_CHANNEL_16_SMP                 (ADC_SMPR1_REGOFFSET | ((18UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP16) */
+#define ADC_CHANNEL_17_SMP                 (ADC_SMPR1_REGOFFSET | ((21UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP17) */
+#define ADC_CHANNEL_18_SMP                 (ADC_SMPR1_REGOFFSET | ((24UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP18) */
+
+/* Internal mask for ADC analog watchdog:                                     */
+/* To select into literals LL_ADC_AWD_CHANNELx_xxx the relevant bits for:     */
+/* (concatenation of multiple bits used in different analog watchdogs,        */
+/* (feature of several watchdogs not available on all STM32 families)).       */
+/* - analog watchdog 1: monitored channel defined by number,                  */
+/*   selection of ADC group (ADC groups regular and-or injected).             */
+
+/* Internal register offset for ADC analog watchdog channel configuration */
+#define ADC_AWD_CR1_REGOFFSET              0x00000000UL
+
+#define ADC_AWD_CRX_REGOFFSET_MASK         (ADC_AWD_CR1_REGOFFSET)
+
+#define ADC_AWD_CR1_CHANNEL_MASK           (ADC_CR1_AWDCH | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL)
+#define ADC_AWD_CR_ALL_CHANNEL_MASK        (ADC_AWD_CR1_CHANNEL_MASK)
+
+/* Internal register offset for ADC analog watchdog threshold configuration */
+#define ADC_AWD_TR1_HIGH_REGOFFSET         0x00000000UL
+#define ADC_AWD_TR1_LOW_REGOFFSET          0x00000001UL
+#define ADC_AWD_TRX_REGOFFSET_MASK         (ADC_AWD_TR1_HIGH_REGOFFSET | ADC_AWD_TR1_LOW_REGOFFSET)
+
+/* ADC registers bits positions */
+#define ADC_CR1_RES_BITOFFSET_POS          (24UL) /* Value equivalent to POSITION_VAL(ADC_CR1_RES) */
+#define ADC_TR_HT_BITOFFSET_POS            (16UL) /* Value equivalent to POSITION_VAL(ADC_TR_HT) */
+
+/* ADC internal channels related definitions */
+/* Internal voltage reference VrefInt */
+#define VREFINT_CAL_ADDR                   ((uint16_t*) (0x1FFF7A2AU)) /* Internal voltage reference, address of parameter VREFINT_CAL: VrefInt ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */
+#define VREFINT_CAL_VREF                   ( 3300UL)                    /* Analog voltage reference (Vref+) value with which temperature sensor has been calibrated in production (tolerance: +-10 mV) (unit: mV). */
+/* Temperature sensor */
+#define TEMPSENSOR_CAL1_ADDR               ((uint16_t*) (0x1FFF7A2CU)) /* Internal temperature sensor, address of parameter TS_CAL1: On STM32F4, temperature sensor ADC raw data acquired at temperature  30 DegC (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */
+#define TEMPSENSOR_CAL2_ADDR               ((uint16_t*) (0x1FFF7A2EU)) /* Internal temperature sensor, address of parameter TS_CAL2: On STM32F4, temperature sensor ADC raw data acquired at temperature 110 DegC (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */
+#define TEMPSENSOR_CAL1_TEMP               (( int32_t)   30)           /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL1_ADDR (tolerance: +-5 DegC) (unit: DegC). */
+#define TEMPSENSOR_CAL2_TEMP               (( int32_t)  110)           /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR (tolerance: +-5 DegC) (unit: DegC). */
+#define TEMPSENSOR_CAL_VREFANALOG          ( 3300UL)                    /* Analog voltage reference (Vref+) voltage with which temperature sensor has been calibrated in production (+-10 mV) (unit: mV). */
+
+/**
+  * @}
+  */
+
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup ADC_LL_Private_Macros ADC Private Macros
+  * @{
+  */
+
+/**
+  * @brief  Driver macro reserved for internal use: isolate bits with the
+  *         selected mask and shift them to the register LSB
+  *         (shift mask on register position bit 0).
+  * @param  __BITS__ Bits in register 32 bits
+  * @param  __MASK__ Mask in register 32 bits
+  * @retval Bits in register 32 bits
+  */
+#define __ADC_MASK_SHIFT(__BITS__, __MASK__)                                   \
+  (((__BITS__) & (__MASK__)) >> POSITION_VAL((__MASK__)))
+
+/**
+  * @brief  Driver macro reserved for internal use: set a pointer to
+  *         a register from a register basis from which an offset
+  *         is applied.
+  * @param  __REG__ Register basis from which the offset is applied.
+  * @param  __REG_OFFFSET__ Offset to be applied (unit number of registers).
+  * @retval Pointer to register address
+  */
+#define __ADC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__)                         \
+ ((__IO uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL))))
+
+/**
+  * @}
+  */
+
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup ADC_LL_ES_INIT ADC Exported Init structure
+  * @{
+  */
+
+/**
+  * @brief  Structure definition of some features of ADC common parameters
+  *         and multimode
+  *         (all ADC instances belonging to the same ADC common instance).
+  * @note   The setting of these parameters by function @ref LL_ADC_CommonInit()
+  *         is conditioned to ADC instances state (all ADC instances
+  *         sharing the same ADC common instance):
+  *         All ADC instances sharing the same ADC common instance must be
+  *         disabled.
+  */
+typedef struct
+{
+  uint32_t CommonClock;                 /*!< Set parameter common to several ADC: Clock source and prescaler.
+                                             This parameter can be a value of @ref ADC_LL_EC_COMMON_CLOCK_SOURCE
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetCommonClock(). */
+
+#if defined(ADC_MULTIMODE_SUPPORT)
+  uint32_t Multimode;                   /*!< Set ADC multimode configuration to operate in independent mode or multimode (for devices with several ADC instances).
+                                             This parameter can be a value of @ref ADC_LL_EC_MULTI_MODE
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetMultimode(). */
+
+  uint32_t MultiDMATransfer;            /*!< Set ADC multimode conversion data transfer: no transfer or transfer by DMA.
+                                             This parameter can be a value of @ref ADC_LL_EC_MULTI_DMA_TRANSFER
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetMultiDMATransfer(). */
+
+  uint32_t MultiTwoSamplingDelay;       /*!< Set ADC multimode delay between 2 sampling phases.
+                                             This parameter can be a value of @ref ADC_LL_EC_MULTI_TWOSMP_DELAY
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetMultiTwoSamplingDelay(). */
+#endif /* ADC_MULTIMODE_SUPPORT */
+
+} LL_ADC_CommonInitTypeDef;
+
+/**
+  * @brief  Structure definition of some features of ADC instance.
+  * @note   These parameters have an impact on ADC scope: ADC instance.
+  *         Affects both group regular and group injected (availability
+  *         of ADC group injected depends on STM32 families).
+  *         Refer to corresponding unitary functions into
+  *         @ref ADC_LL_EF_Configuration_ADC_Instance .
+  * @note   The setting of these parameters by function @ref LL_ADC_Init()
+  *         is conditioned to ADC state:
+  *         ADC instance must be disabled.
+  *         This condition is applied to all ADC features, for efficiency
+  *         and compatibility over all STM32 families. However, the different
+  *         features can be set under different ADC state conditions
+  *         (setting possible with ADC enabled without conversion on going,
+  *         ADC enabled with conversion on going, ...)
+  *         Each feature can be updated afterwards with a unitary function
+  *         and potentially with ADC in a different state than disabled,
+  *         refer to description of each function for setting
+  *         conditioned to ADC state.
+  */
+typedef struct
+{
+  uint32_t Resolution;                  /*!< Set ADC resolution.
+                                             This parameter can be a value of @ref ADC_LL_EC_RESOLUTION
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetResolution(). */
+
+  uint32_t DataAlignment;               /*!< Set ADC conversion data alignment.
+                                             This parameter can be a value of @ref ADC_LL_EC_DATA_ALIGN
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetDataAlignment(). */
+
+  uint32_t SequencersScanMode;          /*!< Set ADC scan selection.
+                                             This parameter can be a value of @ref ADC_LL_EC_SCAN_SELECTION
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_SetSequencersScanMode(). */
+
+} LL_ADC_InitTypeDef;
+
+/**
+  * @brief  Structure definition of some features of ADC group regular.
+  * @note   These parameters have an impact on ADC scope: ADC group regular.
+  *         Refer to corresponding unitary functions into
+  *         @ref ADC_LL_EF_Configuration_ADC_Group_Regular
+  *         (functions with prefix "REG").
+  * @note   The setting of these parameters by function @ref LL_ADC_REG_Init()
+  *         is conditioned to ADC state:
+  *         ADC instance must be disabled.
+  *         This condition is applied to all ADC features, for efficiency
+  *         and compatibility over all STM32 families. However, the different
+  *         features can be set under different ADC state conditions
+  *         (setting possible with ADC enabled without conversion on going,
+  *         ADC enabled with conversion on going, ...)
+  *         Each feature can be updated afterwards with a unitary function
+  *         and potentially with ADC in a different state than disabled,
+  *         refer to description of each function for setting
+  *         conditioned to ADC state.
+  */
+typedef struct
+{
+  uint32_t TriggerSource;               /*!< Set ADC group regular conversion trigger source: internal (SW start) or from external IP (timer event, external interrupt line).
+                                             This parameter can be a value of @ref ADC_LL_EC_REG_TRIGGER_SOURCE
+                                             @note On this STM32 series, setting of external trigger edge is performed
+                                                   using function @ref LL_ADC_REG_StartConversionExtTrig().
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetTriggerSource(). */
+
+  uint32_t SequencerLength;             /*!< Set ADC group regular sequencer length.
+                                             This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_SCAN_LENGTH
+                                             @note This parameter is discarded if scan mode is disabled (refer to parameter 'ADC_SequencersScanMode').
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetSequencerLength(). */
+
+  uint32_t SequencerDiscont;            /*!< Set ADC group regular sequencer discontinuous mode: sequence subdivided and scan conversions interrupted every selected number of ranks.
+                                             This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_DISCONT_MODE
+                                             @note This parameter has an effect only if group regular sequencer is enabled
+                                                   (scan length of 2 ranks or more).
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetSequencerDiscont(). */
+
+  uint32_t ContinuousMode;              /*!< Set ADC continuous conversion mode on ADC group regular, whether ADC conversions are performed in single mode (one conversion per trigger) or in continuous mode (after the first trigger, following conversions launched successively automatically).
+                                             This parameter can be a value of @ref ADC_LL_EC_REG_CONTINUOUS_MODE
+                                             Note: It is not possible to enable both ADC group regular continuous mode and discontinuous mode.
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetContinuousMode(). */
+
+  uint32_t DMATransfer;                 /*!< Set ADC group regular conversion data transfer: no transfer or transfer by DMA, and DMA requests mode.
+                                             This parameter can be a value of @ref ADC_LL_EC_REG_DMA_TRANSFER
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetDMATransfer(). */
+
+} LL_ADC_REG_InitTypeDef;
+
+/**
+  * @brief  Structure definition of some features of ADC group injected.
+  * @note   These parameters have an impact on ADC scope: ADC group injected.
+  *         Refer to corresponding unitary functions into
+  *         @ref ADC_LL_EF_Configuration_ADC_Group_Regular
+  *         (functions with prefix "INJ").
+  * @note   The setting of these parameters by function @ref LL_ADC_INJ_Init()
+  *         is conditioned to ADC state:
+  *         ADC instance must be disabled.
+  *         This condition is applied to all ADC features, for efficiency
+  *         and compatibility over all STM32 families. However, the different
+  *         features can be set under different ADC state conditions
+  *         (setting possible with ADC enabled without conversion on going,
+  *         ADC enabled with conversion on going, ...)
+  *         Each feature can be updated afterwards with a unitary function
+  *         and potentially with ADC in a different state than disabled,
+  *         refer to description of each function for setting
+  *         conditioned to ADC state.
+  */
+typedef struct
+{
+  uint32_t TriggerSource;               /*!< Set ADC group injected conversion trigger source: internal (SW start) or from external IP (timer event, external interrupt line).
+                                             This parameter can be a value of @ref ADC_LL_EC_INJ_TRIGGER_SOURCE
+                                             @note On this STM32 series, setting of external trigger edge is performed
+                                                   using function @ref LL_ADC_INJ_StartConversionExtTrig().
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetTriggerSource(). */
+
+  uint32_t SequencerLength;             /*!< Set ADC group injected sequencer length.
+                                             This parameter can be a value of @ref ADC_LL_EC_INJ_SEQ_SCAN_LENGTH
+                                             @note This parameter is discarded if scan mode is disabled (refer to parameter 'ADC_SequencersScanMode').
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetSequencerLength(). */
+
+  uint32_t SequencerDiscont;            /*!< Set ADC group injected sequencer discontinuous mode: sequence subdivided and scan conversions interrupted every selected number of ranks.
+                                             This parameter can be a value of @ref ADC_LL_EC_INJ_SEQ_DISCONT_MODE
+                                             @note This parameter has an effect only if group injected sequencer is enabled
+                                                   (scan length of 2 ranks or more).
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetSequencerDiscont(). */
+
+  uint32_t TrigAuto;                    /*!< Set ADC group injected conversion trigger: independent or from ADC group regular.
+                                             This parameter can be a value of @ref ADC_LL_EC_INJ_TRIG_AUTO
+                                             Note: This parameter must be set to set to independent trigger if injected trigger source is set to an external trigger. 
+                                             
+                                             This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetTrigAuto(). */
+
+} LL_ADC_INJ_InitTypeDef;
+
+/**
+  * @}
+  */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ADC_LL_Exported_Constants ADC Exported Constants
+  * @{
+  */
+
+/** @defgroup ADC_LL_EC_FLAG ADC flags
+  * @brief    Flags defines which can be used with LL_ADC_ReadReg function
+  * @{
+  */
+#define LL_ADC_FLAG_STRT                   ADC_SR_STRT        /*!< ADC flag ADC group regular conversion start */
+#define LL_ADC_FLAG_EOCS                   ADC_SR_EOC         /*!< ADC flag ADC group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */
+#define LL_ADC_FLAG_OVR                    ADC_SR_OVR         /*!< ADC flag ADC group regular overrun */
+#define LL_ADC_FLAG_JSTRT                  ADC_SR_JSTRT       /*!< ADC flag ADC group injected conversion start */
+#define LL_ADC_FLAG_JEOS                   ADC_SR_JEOC        /*!< ADC flag ADC group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
+#define LL_ADC_FLAG_AWD1                   ADC_SR_AWD         /*!< ADC flag ADC analog watchdog 1 */
+#if defined(ADC_MULTIMODE_SUPPORT)
+#define LL_ADC_FLAG_EOCS_MST               ADC_CSR_EOC1       /*!< ADC flag ADC multimode master group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */
+#define LL_ADC_FLAG_EOCS_SLV1              ADC_CSR_EOC2       /*!< ADC flag ADC multimode slave 1 group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */
+#define LL_ADC_FLAG_EOCS_SLV2              ADC_CSR_EOC3       /*!< ADC flag ADC multimode slave 2 group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */
+#define LL_ADC_FLAG_OVR_MST                ADC_CSR_OVR1    /*!< ADC flag ADC multimode master group regular overrun */ 
+#define LL_ADC_FLAG_OVR_SLV1               ADC_CSR_OVR2   /*!< ADC flag ADC multimode slave 1 group regular overrun */
+#define LL_ADC_FLAG_OVR_SLV2               ADC_CSR_OVR3   /*!< ADC flag ADC multimode slave 2 group regular overrun */
+#define LL_ADC_FLAG_JEOS_MST               ADC_CSR_JEOC1     /*!< ADC flag ADC multimode master group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
+#define LL_ADC_FLAG_JEOS_SLV1              ADC_CSR_JEOC2  /*!< ADC flag ADC multimode slave 1 group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
+#define LL_ADC_FLAG_JEOS_SLV2              ADC_CSR_JEOC3  /*!< ADC flag ADC multimode slave 2 group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
+#define LL_ADC_FLAG_AWD1_MST               ADC_CSR_AWD1       /*!< ADC flag ADC multimode master analog watchdog 1 of the ADC master */
+#define LL_ADC_FLAG_AWD1_SLV1              ADC_CSR_AWD2       /*!< ADC flag ADC multimode slave 1 analog watchdog 1 */
+#define LL_ADC_FLAG_AWD1_SLV2              ADC_CSR_AWD3       /*!< ADC flag ADC multimode slave 2 analog watchdog 1 */
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_IT ADC interruptions for configuration (interruption enable or disable)
+  * @brief    IT defines which can be used with LL_ADC_ReadReg and  LL_ADC_WriteReg functions
+  * @{
+  */
+#define LL_ADC_IT_EOCS                     ADC_CR1_EOCIE      /*!< ADC interruption ADC group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */
+#define LL_ADC_IT_OVR                      ADC_CR1_OVRIE      /*!< ADC interruption ADC group regular overrun */
+#define LL_ADC_IT_JEOS                     ADC_CR1_JEOCIE     /*!< ADC interruption ADC group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
+#define LL_ADC_IT_AWD1                     ADC_CR1_AWDIE      /*!< ADC interruption ADC analog watchdog 1 */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_REGISTERS  ADC registers compliant with specific purpose
+  * @{
+  */
+/* List of ADC registers intended to be used (most commonly) with             */
+/* DMA transfer.                                                              */
+/* Refer to function @ref LL_ADC_DMA_GetRegAddr().                            */
+#define LL_ADC_DMA_REG_REGULAR_DATA          0x00000000UL   /* ADC group regular conversion data register (corresponding to register DR) to be used with ADC configured in independent mode. Without DMA transfer, register accessed by LL function @ref LL_ADC_REG_ReadConversionData32() and other functions @ref LL_ADC_REG_ReadConversionDatax() */
+#if defined(ADC_MULTIMODE_SUPPORT)
+#define LL_ADC_DMA_REG_REGULAR_DATA_MULTI    0x00000001UL   /* ADC group regular conversion data register (corresponding to register CDR) to be used with ADC configured in multimode (available on STM32 devices with several ADC instances). Without DMA transfer, register accessed by LL function @ref LL_ADC_REG_ReadMultiConversionData32() */
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_COMMON_CLOCK_SOURCE  ADC common - Clock source
+  * @{
+  */
+#define LL_ADC_CLOCK_SYNC_PCLK_DIV2        0x00000000UL                                           /*!< ADC synchronous clock derived from AHB clock with prescaler division by 2 */
+#define LL_ADC_CLOCK_SYNC_PCLK_DIV4        (                   ADC_CCR_ADCPRE_0)                 /*!< ADC synchronous clock derived from AHB clock with prescaler division by 4 */
+#define LL_ADC_CLOCK_SYNC_PCLK_DIV6        (ADC_CCR_ADCPRE_1                   )                 /*!< ADC synchronous clock derived from AHB clock with prescaler division by 6 */
+#define LL_ADC_CLOCK_SYNC_PCLK_DIV8        (ADC_CCR_ADCPRE_1 | ADC_CCR_ADCPRE_0)                 /*!< ADC synchronous clock derived from AHB clock with prescaler division by 8 */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_COMMON_PATH_INTERNAL  ADC common - Measurement path to internal channels
+  * @{
+  */
+/* Note: Other measurement paths to internal channels may be available        */
+/*       (connections to other peripherals).                                  */
+/*       If they are not listed below, they do not require any specific       */
+/*       path enable. In this case, Access to measurement path is done        */
+/*       only by selecting the corresponding ADC internal channel.            */
+#define LL_ADC_PATH_INTERNAL_NONE          0x00000000UL            /*!< ADC measurement paths all disabled */
+#define LL_ADC_PATH_INTERNAL_VREFINT       (ADC_CCR_TSVREFE)      /*!< ADC measurement path to internal channel VrefInt */
+#define LL_ADC_PATH_INTERNAL_TEMPSENSOR    (ADC_CCR_TSVREFE)      /*!< ADC measurement path to internal channel temperature sensor */
+#define LL_ADC_PATH_INTERNAL_VBAT          (ADC_CCR_VBATE)        /*!< ADC measurement path to internal channel Vbat */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_RESOLUTION  ADC instance - Resolution
+  * @{
+  */
+#define LL_ADC_RESOLUTION_12B              0x00000000UL                         /*!< ADC resolution 12 bits */
+#define LL_ADC_RESOLUTION_10B              (                ADC_CR1_RES_0)     /*!< ADC resolution 10 bits */
+#define LL_ADC_RESOLUTION_8B               (ADC_CR1_RES_1                )     /*!< ADC resolution  8 bits */
+#define LL_ADC_RESOLUTION_6B               (ADC_CR1_RES_1 | ADC_CR1_RES_0)     /*!< ADC resolution  6 bits */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_DATA_ALIGN  ADC instance - Data alignment
+  * @{
+  */
+#define LL_ADC_DATA_ALIGN_RIGHT            0x00000000UL            /*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/
+#define LL_ADC_DATA_ALIGN_LEFT             (ADC_CR2_ALIGN)        /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_SCAN_SELECTION ADC instance - Scan selection
+  * @{
+  */
+#define LL_ADC_SEQ_SCAN_DISABLE            0x00000000UL    /*!< ADC conversion is performed in unitary conversion mode (one channel converted, that defined in rank 1). Configuration of both groups regular and injected sequencers (sequence length, ...) is discarded: equivalent to length of 1 rank.*/
+#define LL_ADC_SEQ_SCAN_ENABLE             (ADC_CR1_SCAN) /*!< ADC conversions are performed in sequence conversions mode, according to configuration of both groups regular and injected sequencers (sequence length, ...). */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_GROUPS  ADC instance - Groups
+  * @{
+  */
+#define LL_ADC_GROUP_REGULAR               0x00000001UL   /*!< ADC group regular (available on all STM32 devices) */
+#define LL_ADC_GROUP_INJECTED              0x00000002UL   /*!< ADC group injected (not available on all STM32 devices)*/
+#define LL_ADC_GROUP_REGULAR_INJECTED      0x00000003UL   /*!< ADC both groups regular and injected */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_CHANNEL  ADC instance - Channel number
+  * @{
+  */
+#define LL_ADC_CHANNEL_0                   (ADC_CHANNEL_0_NUMBER  | ADC_CHANNEL_0_SMP)  /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN0  */
+#define LL_ADC_CHANNEL_1                   (ADC_CHANNEL_1_NUMBER  | ADC_CHANNEL_1_SMP)  /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN1  */
+#define LL_ADC_CHANNEL_2                   (ADC_CHANNEL_2_NUMBER  | ADC_CHANNEL_2_SMP)  /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN2  */
+#define LL_ADC_CHANNEL_3                   (ADC_CHANNEL_3_NUMBER  | ADC_CHANNEL_3_SMP)  /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN3  */
+#define LL_ADC_CHANNEL_4                   (ADC_CHANNEL_4_NUMBER  | ADC_CHANNEL_4_SMP)  /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN4  */
+#define LL_ADC_CHANNEL_5                   (ADC_CHANNEL_5_NUMBER  | ADC_CHANNEL_5_SMP)  /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN5  */
+#define LL_ADC_CHANNEL_6                   (ADC_CHANNEL_6_NUMBER  | ADC_CHANNEL_6_SMP)  /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN6  */
+#define LL_ADC_CHANNEL_7                   (ADC_CHANNEL_7_NUMBER  | ADC_CHANNEL_7_SMP)  /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN7  */
+#define LL_ADC_CHANNEL_8                   (ADC_CHANNEL_8_NUMBER  | ADC_CHANNEL_8_SMP)  /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN8  */
+#define LL_ADC_CHANNEL_9                   (ADC_CHANNEL_9_NUMBER  | ADC_CHANNEL_9_SMP)  /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN9  */
+#define LL_ADC_CHANNEL_10                  (ADC_CHANNEL_10_NUMBER | ADC_CHANNEL_10_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN10 */
+#define LL_ADC_CHANNEL_11                  (ADC_CHANNEL_11_NUMBER | ADC_CHANNEL_11_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN11 */
+#define LL_ADC_CHANNEL_12                  (ADC_CHANNEL_12_NUMBER | ADC_CHANNEL_12_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN12 */
+#define LL_ADC_CHANNEL_13                  (ADC_CHANNEL_13_NUMBER | ADC_CHANNEL_13_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN13 */
+#define LL_ADC_CHANNEL_14                  (ADC_CHANNEL_14_NUMBER | ADC_CHANNEL_14_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN14 */
+#define LL_ADC_CHANNEL_15                  (ADC_CHANNEL_15_NUMBER | ADC_CHANNEL_15_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN15 */
+#define LL_ADC_CHANNEL_16                  (ADC_CHANNEL_16_NUMBER | ADC_CHANNEL_16_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN16 */
+#define LL_ADC_CHANNEL_17                  (ADC_CHANNEL_17_NUMBER | ADC_CHANNEL_17_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN17 */
+#define LL_ADC_CHANNEL_18                  (ADC_CHANNEL_18_NUMBER | ADC_CHANNEL_18_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN18 */
+#define LL_ADC_CHANNEL_VREFINT             (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. On STM32F4, ADC channel available only on ADC instance: ADC1. */
+#define LL_ADC_CHANNEL_VBAT                (LL_ADC_CHANNEL_18 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda. On STM32F4, ADC channel available only on ADC instance: ADC1. */
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F415xx) || defined(STM32F417xx)
+#define LL_ADC_CHANNEL_TEMPSENSOR          (LL_ADC_CHANNEL_16 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Temperature sensor. On STM32F4, ADC channel available only on ADC instance: ADC1. */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx */
+#if defined(STM32F411xE) || defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define LL_ADC_CHANNEL_TEMPSENSOR          (LL_ADC_CHANNEL_18 | ADC_CHANNEL_ID_INTERNAL_CH | ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT) /*!< ADC internal channel connected to Temperature sensor. On STM32F4, ADC channel available only on ADC instance: ADC1. This internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. */
+#endif /* STM32F411xE || STM32F412Cx || STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_REG_TRIGGER_SOURCE  ADC group regular - Trigger source
+  * @{
+  */
+#define LL_ADC_REG_TRIG_SOFTWARE           0x00000000UL                                                                                                 /*!< ADC group regular conversion trigger internal: SW start. */
+#define LL_ADC_REG_TRIG_EXT_TIM1_CH1       (ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                                                             /*!< ADC group regular conversion trigger from external IP: TIM1 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM1_CH2       (ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                                          /*!< ADC group regular conversion trigger from external IP: TIM1 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM1_CH3       (ADC_CR2_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                                          /*!< ADC group regular conversion trigger from external IP: TIM1 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM2_CH2       (ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                       /*!< ADC group regular conversion trigger from external IP: TIM2 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM2_CH3       (ADC_CR2_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                                          /*!< ADC group regular conversion trigger from external IP: TIM2 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM2_CH4       (ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                       /*!< ADC group regular conversion trigger from external IP: TIM2 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM2_TRGO      (ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                       /*!< ADC group regular conversion trigger from external IP: TIM2 TRGO. Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM3_CH1       (ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                    /*!< ADC group regular conversion trigger from external IP: TIM3 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM3_TRGO      (ADC_CR2_EXTSEL_3 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                                          /*!< ADC group regular conversion trigger from external IP: TIM3 TRGO. Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM4_CH4       (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                       /*!< ADC group regular conversion trigger from external IP: TIM4 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM5_CH1       (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                       /*!< ADC group regular conversion trigger from external IP: TIM5 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM5_CH2       (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                    /*!< ADC group regular conversion trigger from external IP: TIM5 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM5_CH3       (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                                       /*!< ADC group regular conversion trigger from external IP: TIM5 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM8_CH1       (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                    /*!< ADC group regular conversion trigger from external IP: TIM8 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM8_TRGO      (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT)                    /*!< ADC group regular conversion trigger from external IP: TIM8 TRGO. Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_EXTI_LINE11    (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: external interrupt line 11. Trigger edge set to rising edge (default setting). */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_REG_TRIGGER_EDGE  ADC group regular - Trigger edge
+  * @{
+  */
+#define LL_ADC_REG_TRIG_EXT_RISING         (                  ADC_CR2_EXTEN_0)     /*!< ADC group regular conversion trigger polarity set to rising edge */
+#define LL_ADC_REG_TRIG_EXT_FALLING        (ADC_CR2_EXTEN_1                  )     /*!< ADC group regular conversion trigger polarity set to falling edge */
+#define LL_ADC_REG_TRIG_EXT_RISINGFALLING  (ADC_CR2_EXTEN_1 | ADC_CR2_EXTEN_0)     /*!< ADC group regular conversion trigger polarity set to both rising and falling edges */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_REG_CONTINUOUS_MODE  ADC group regular - Continuous mode
+* @{
+*/
+#define LL_ADC_REG_CONV_SINGLE             0x00000000UL             /*!< ADC conversions are performed in single mode: one conversion per trigger */
+#define LL_ADC_REG_CONV_CONTINUOUS         (ADC_CR2_CONT)          /*!< ADC conversions are performed in continuous mode: after the first trigger, following conversions launched successively automatically */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_REG_DMA_TRANSFER  ADC group regular - DMA transfer of ADC conversion data
+  * @{
+  */
+#define LL_ADC_REG_DMA_TRANSFER_NONE       0x00000000UL              /*!< ADC conversions are not transferred by DMA */
+#define LL_ADC_REG_DMA_TRANSFER_LIMITED    (              ADC_CR2_DMA)          /*!< ADC conversion data are transferred by DMA, in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. */
+#define LL_ADC_REG_DMA_TRANSFER_UNLIMITED  (ADC_CR2_DDS | ADC_CR2_DMA)          /*!< ADC conversion data are transferred by DMA, in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions). This ADC mode is intended to be used with DMA mode circular. */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_REG_FLAG_EOC_SELECTION ADC group regular - Flag EOC selection (unitary or sequence conversions)
+  * @{
+  */
+#define LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV       0x00000000UL    /*!< ADC flag EOC (end of unitary conversion) selected */
+#define LL_ADC_REG_FLAG_EOC_UNITARY_CONV        (ADC_CR2_EOCS) /*!< ADC flag EOS (end of sequence conversions) selected */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_REG_SEQ_SCAN_LENGTH  ADC group regular - Sequencer scan length
+  * @{
+  */
+#define LL_ADC_REG_SEQ_SCAN_DISABLE        0x00000000UL                                                 /*!< ADC group regular sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS  (                                             ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 2 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS  (                              ADC_SQR1_L_1               ) /*!< ADC group regular sequencer enable with 3 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS  (                              ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 4 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS  (               ADC_SQR1_L_2                              ) /*!< ADC group regular sequencer enable with 5 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS  (               ADC_SQR1_L_2                | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 6 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS  (               ADC_SQR1_L_2 | ADC_SQR1_L_1               ) /*!< ADC group regular sequencer enable with 7 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS  (               ADC_SQR1_L_2 | ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 8 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS  (ADC_SQR1_L_3                                             ) /*!< ADC group regular sequencer enable with 9 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS (ADC_SQR1_L_3                               | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 10 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS (ADC_SQR1_L_3                | ADC_SQR1_L_1               ) /*!< ADC group regular sequencer enable with 11 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS (ADC_SQR1_L_3                | ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 12 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2                              ) /*!< ADC group regular sequencer enable with 13 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2                | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 14 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 | ADC_SQR1_L_1               ) /*!< ADC group regular sequencer enable with 15 ranks in the sequence */
+#define LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 | ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 16 ranks in the sequence */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_REG_SEQ_DISCONT_MODE  ADC group regular - Sequencer discontinuous mode
+  * @{
+  */
+#define LL_ADC_REG_SEQ_DISCONT_DISABLE     0x00000000UL                                                                  /*!< ADC group regular sequencer discontinuous mode disable */
+#define LL_ADC_REG_SEQ_DISCONT_1RANK       (                                                            ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every rank */
+#define LL_ADC_REG_SEQ_DISCONT_2RANKS      (                                        ADC_CR1_DISCNUM_0 | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enabled with sequence interruption every 2 ranks */
+#define LL_ADC_REG_SEQ_DISCONT_3RANKS      (                    ADC_CR1_DISCNUM_1                     | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 3 ranks */
+#define LL_ADC_REG_SEQ_DISCONT_4RANKS      (                    ADC_CR1_DISCNUM_1 | ADC_CR1_DISCNUM_0 | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 4 ranks */
+#define LL_ADC_REG_SEQ_DISCONT_5RANKS      (ADC_CR1_DISCNUM_2                                         | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 5 ranks */
+#define LL_ADC_REG_SEQ_DISCONT_6RANKS      (ADC_CR1_DISCNUM_2                     | ADC_CR1_DISCNUM_0 | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 6 ranks */
+#define LL_ADC_REG_SEQ_DISCONT_7RANKS      (ADC_CR1_DISCNUM_2 | ADC_CR1_DISCNUM_1                     | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 7 ranks */
+#define LL_ADC_REG_SEQ_DISCONT_8RANKS      (ADC_CR1_DISCNUM_2 | ADC_CR1_DISCNUM_1 | ADC_CR1_DISCNUM_0 | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 8 ranks */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_REG_SEQ_RANKS  ADC group regular - Sequencer ranks
+  * @{
+  */
+#define LL_ADC_REG_RANK_1                  (ADC_SQR3_REGOFFSET | ADC_REG_RANK_1_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 1 */
+#define LL_ADC_REG_RANK_2                  (ADC_SQR3_REGOFFSET | ADC_REG_RANK_2_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 2 */
+#define LL_ADC_REG_RANK_3                  (ADC_SQR3_REGOFFSET | ADC_REG_RANK_3_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 3 */
+#define LL_ADC_REG_RANK_4                  (ADC_SQR3_REGOFFSET | ADC_REG_RANK_4_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 4 */
+#define LL_ADC_REG_RANK_5                  (ADC_SQR3_REGOFFSET | ADC_REG_RANK_5_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 5 */
+#define LL_ADC_REG_RANK_6                  (ADC_SQR3_REGOFFSET | ADC_REG_RANK_6_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 6 */
+#define LL_ADC_REG_RANK_7                  (ADC_SQR2_REGOFFSET | ADC_REG_RANK_7_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 7 */
+#define LL_ADC_REG_RANK_8                  (ADC_SQR2_REGOFFSET | ADC_REG_RANK_8_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 8 */
+#define LL_ADC_REG_RANK_9                  (ADC_SQR2_REGOFFSET | ADC_REG_RANK_9_SQRX_BITOFFSET_POS)  /*!< ADC group regular sequencer rank 9 */
+#define LL_ADC_REG_RANK_10                 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_10_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 10 */
+#define LL_ADC_REG_RANK_11                 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_11_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 11 */
+#define LL_ADC_REG_RANK_12                 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_12_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 12 */
+#define LL_ADC_REG_RANK_13                 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_13_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 13 */
+#define LL_ADC_REG_RANK_14                 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_14_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 14 */
+#define LL_ADC_REG_RANK_15                 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_15_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 15 */
+#define LL_ADC_REG_RANK_16                 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_16_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 16 */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_INJ_TRIGGER_SOURCE  ADC group injected - Trigger source
+  * @{
+  */
+#define LL_ADC_INJ_TRIG_SOFTWARE           0x00000000UL                                                                                                     /*!< ADC group injected conversion trigger internal: SW start. */
+#define LL_ADC_INJ_TRIG_EXT_TIM1_CH4       (ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                                                                 /*!< ADC group injected conversion trigger from external IP: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM1_TRGO      (ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                                             /*!< ADC group injected conversion trigger from external IP: TIM1 TRGO. Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM2_CH1       (ADC_CR2_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                                             /*!< ADC group injected conversion trigger from external IP: TIM2 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM2_TRGO      (ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                         /*!< ADC group injected conversion trigger from external IP: TIM2 TRGO. Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM3_CH2       (ADC_CR2_JEXTSEL_2 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                                             /*!< ADC group injected conversion trigger from external IP: TIM3 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM3_CH4       (ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                         /*!< ADC group injected conversion trigger from external IP: TIM3 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM4_CH1       (ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                         /*!< ADC group injected conversion trigger from external IP: TIM4 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM4_CH2       (ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                     /*!< ADC group injected conversion trigger from external IP: TIM4 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM4_CH3       (ADC_CR2_JEXTSEL_3 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                                             /*!< ADC group injected conversion trigger from external IP: TIM4 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM4_TRGO      (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                         /*!< ADC group injected conversion trigger from external IP: TIM4 TRGO. Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM5_CH4       (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                         /*!< ADC group injected conversion trigger from external IP: TIM5 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM5_TRGO      (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                     /*!< ADC group injected conversion trigger from external IP: TIM5 TRGO. Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM8_CH2       (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                                         /*!< ADC group injected conversion trigger from external IP: TIM8 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM8_CH3       (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                     /*!< ADC group injected conversion trigger from external IP: TIM8 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_TIM8_CH4       (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)                     /*!< ADC group injected conversion trigger from external IP: TIM8 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_INJ_TRIG_EXT_EXTI_LINE15    (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: external interrupt line 15. Trigger edge set to rising edge (default setting). */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_INJ_TRIGGER_EDGE  ADC group injected - Trigger edge
+  * @{
+  */
+#define LL_ADC_INJ_TRIG_EXT_RISING         (                   ADC_CR2_JEXTEN_0)   /*!< ADC group injected conversion trigger polarity set to rising edge */
+#define LL_ADC_INJ_TRIG_EXT_FALLING        (ADC_CR2_JEXTEN_1                   )   /*!< ADC group injected conversion trigger polarity set to falling edge */
+#define LL_ADC_INJ_TRIG_EXT_RISINGFALLING  (ADC_CR2_JEXTEN_1 | ADC_CR2_JEXTEN_0)   /*!< ADC group injected conversion trigger polarity set to both rising and falling edges */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_INJ_TRIG_AUTO  ADC group injected - Automatic trigger mode
+* @{
+*/
+#define LL_ADC_INJ_TRIG_INDEPENDENT        0x00000000UL            /*!< ADC group injected conversion trigger independent. Setting mandatory if ADC group injected injected trigger source is set to an external trigger. */
+#define LL_ADC_INJ_TRIG_FROM_GRP_REGULAR   (ADC_CR1_JAUTO)        /*!< ADC group injected conversion trigger from ADC group regular. Setting compliant only with group injected trigger source set to SW start, without any further action on  ADC group injected conversion start or stop: in this case, ADC group injected is controlled only from ADC group regular. */
+/**
+  * @}
+  */
+
+
+/** @defgroup ADC_LL_EC_INJ_SEQ_SCAN_LENGTH  ADC group injected - Sequencer scan length
+  * @{
+  */
+#define LL_ADC_INJ_SEQ_SCAN_DISABLE        0x00000000UL                     /*!< ADC group injected sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */
+#define LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS  (                ADC_JSQR_JL_0) /*!< ADC group injected sequencer enable with 2 ranks in the sequence */
+#define LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS  (ADC_JSQR_JL_1                ) /*!< ADC group injected sequencer enable with 3 ranks in the sequence */
+#define LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS  (ADC_JSQR_JL_1 | ADC_JSQR_JL_0) /*!< ADC group injected sequencer enable with 4 ranks in the sequence */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_INJ_SEQ_DISCONT_MODE  ADC group injected - Sequencer discontinuous mode
+  * @{
+  */
+#define LL_ADC_INJ_SEQ_DISCONT_DISABLE     0x00000000UL            /*!< ADC group injected sequencer discontinuous mode disable */
+#define LL_ADC_INJ_SEQ_DISCONT_1RANK       (ADC_CR1_JDISCEN)      /*!< ADC group injected sequencer discontinuous mode enable with sequence interruption every rank */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_INJ_SEQ_RANKS  ADC group injected - Sequencer ranks
+  * @{
+  */
+#define LL_ADC_INJ_RANK_1                  (ADC_JDR1_REGOFFSET | ADC_JOFR1_REGOFFSET | 0x00000001UL) /*!< ADC group injected sequencer rank 1 */
+#define LL_ADC_INJ_RANK_2                  (ADC_JDR2_REGOFFSET | ADC_JOFR2_REGOFFSET | 0x00000002UL) /*!< ADC group injected sequencer rank 2 */
+#define LL_ADC_INJ_RANK_3                  (ADC_JDR3_REGOFFSET | ADC_JOFR3_REGOFFSET | 0x00000003UL) /*!< ADC group injected sequencer rank 3 */
+#define LL_ADC_INJ_RANK_4                  (ADC_JDR4_REGOFFSET | ADC_JOFR4_REGOFFSET | 0x00000004UL) /*!< ADC group injected sequencer rank 4 */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_CHANNEL_SAMPLINGTIME  Channel - Sampling time
+  * @{
+  */
+#define LL_ADC_SAMPLINGTIME_3CYCLES        0x00000000UL                                              /*!< Sampling time 3 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_15CYCLES       (ADC_SMPR1_SMP10_0)                                      /*!< Sampling time 15 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_28CYCLES       (ADC_SMPR1_SMP10_1)                                      /*!< Sampling time 28 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_56CYCLES       (ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0)                  /*!< Sampling time 56 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_84CYCLES       (ADC_SMPR1_SMP10_2)                                      /*!< Sampling time 84 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_112CYCLES      (ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0)                  /*!< Sampling time 112 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_144CYCLES      (ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1)                  /*!< Sampling time 144 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_480CYCLES      (ADC_SMPR1_SMP10)                                        /*!< Sampling time 480 ADC clock cycles */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_AWD_NUMBER Analog watchdog - Analog watchdog number
+  * @{
+  */
+#define LL_ADC_AWD1                        (ADC_AWD_CR1_CHANNEL_MASK  | ADC_AWD_CR1_REGOFFSET) /*!< ADC analog watchdog number 1 */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_AWD_CHANNELS  Analog watchdog - Monitored channels
+  * @{
+  */
+#define LL_ADC_AWD_DISABLE                 0x00000000UL                                                                                   /*!< ADC analog watchdog monitoring disabled */
+#define LL_ADC_AWD_ALL_CHANNELS_REG        (                                                             ADC_CR1_AWDEN                 ) /*!< ADC analog watchdog monitoring of all channels, converted by group regular only */
+#define LL_ADC_AWD_ALL_CHANNELS_INJ        (                                            ADC_CR1_JAWDEN                                 ) /*!< ADC analog watchdog monitoring of all channels, converted by group injected only */
+#define LL_ADC_AWD_ALL_CHANNELS_REG_INJ    (                                            ADC_CR1_JAWDEN | ADC_CR1_AWDEN                 ) /*!< ADC analog watchdog monitoring of all channels, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_0_REG           ((LL_ADC_CHANNEL_0  & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_0_INJ           ((LL_ADC_CHANNEL_0  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_0_REG_INJ       ((LL_ADC_CHANNEL_0  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_1_REG           ((LL_ADC_CHANNEL_1  & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_1_INJ           ((LL_ADC_CHANNEL_1  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_1_REG_INJ       ((LL_ADC_CHANNEL_1  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_2_REG           ((LL_ADC_CHANNEL_2  & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_2_INJ           ((LL_ADC_CHANNEL_2  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_2_REG_INJ       ((LL_ADC_CHANNEL_2  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_3_REG           ((LL_ADC_CHANNEL_3  & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_3_INJ           ((LL_ADC_CHANNEL_3  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_3_REG_INJ       ((LL_ADC_CHANNEL_3  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_4_REG           ((LL_ADC_CHANNEL_4  & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_4_INJ           ((LL_ADC_CHANNEL_4  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_4_REG_INJ       ((LL_ADC_CHANNEL_4  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_5_REG           ((LL_ADC_CHANNEL_5  & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_5_INJ           ((LL_ADC_CHANNEL_5  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_5_REG_INJ       ((LL_ADC_CHANNEL_5  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_6_REG           ((LL_ADC_CHANNEL_6  & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_6_INJ           ((LL_ADC_CHANNEL_6  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_6_REG_INJ       ((LL_ADC_CHANNEL_6  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_7_REG           ((LL_ADC_CHANNEL_7  & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_7_INJ           ((LL_ADC_CHANNEL_7  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_7_REG_INJ       ((LL_ADC_CHANNEL_7  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_8_REG           ((LL_ADC_CHANNEL_8  & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_8_INJ           ((LL_ADC_CHANNEL_8  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_8_REG_INJ       ((LL_ADC_CHANNEL_8  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_9_REG           ((LL_ADC_CHANNEL_9  & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_9_INJ           ((LL_ADC_CHANNEL_9  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_9_REG_INJ       ((LL_ADC_CHANNEL_9  & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_10_REG          ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_10_INJ          ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_10_REG_INJ      ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_11_REG          ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_11_INJ          ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_11_REG_INJ      ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_12_REG          ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_12_INJ          ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_12_REG_INJ      ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_13_REG          ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_13_INJ          ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_13_REG_INJ      ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_14_REG          ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_14_INJ          ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_14_REG_INJ      ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_15_REG          ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_15_INJ          ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_15_REG_INJ      ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_16_REG          ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_16_INJ          ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_16_REG_INJ      ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_17_REG          ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_17_INJ          ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_17_REG_INJ      ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by either group regular or injected */
+#define LL_ADC_AWD_CHANNEL_18_REG          ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_18_INJ          ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group injected only */
+#define LL_ADC_AWD_CHANNEL_18_REG_INJ      ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by either group regular or injected */
+#define LL_ADC_AWD_CH_VREFINT_REG          ((LL_ADC_CHANNEL_VREFINT    & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by group regular only */
+#define LL_ADC_AWD_CH_VREFINT_INJ          ((LL_ADC_CHANNEL_VREFINT    & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by group injected only */
+#define LL_ADC_AWD_CH_VREFINT_REG_INJ      ((LL_ADC_CHANNEL_VREFINT    & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by either group regular or injected */
+#define LL_ADC_AWD_CH_VBAT_REG             ((LL_ADC_CHANNEL_VBAT       & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda, converted by group regular only */
+#define LL_ADC_AWD_CH_VBAT_INJ             ((LL_ADC_CHANNEL_VBAT       & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda, converted by group injected only */
+#define LL_ADC_AWD_CH_VBAT_REG_INJ         ((LL_ADC_CHANNEL_VBAT       & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda */
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F415xx) || defined(STM32F417xx)
+#define LL_ADC_AWD_CH_TEMPSENSOR_REG       ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group regular only */
+#define LL_ADC_AWD_CH_TEMPSENSOR_INJ       ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group injected only */
+#define LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ   ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by either group regular or injected */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx */
+#if defined(STM32F411xE) || defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define LL_ADC_AWD_CH_TEMPSENSOR_REG       ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK)                  | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group regular only. This internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. */
+#define LL_ADC_AWD_CH_TEMPSENSOR_INJ       ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN                 | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group injected only. This internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. */
+#define LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ   ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by either group regular or injected. This internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled. */
+#endif /* STM32F411xE || STM32F412Cx || STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_AWD_THRESHOLDS  Analog watchdog - Thresholds
+  * @{
+  */
+#define LL_ADC_AWD_THRESHOLD_HIGH          (ADC_AWD_TR1_HIGH_REGOFFSET) /*!< ADC analog watchdog threshold high */
+#define LL_ADC_AWD_THRESHOLD_LOW           (ADC_AWD_TR1_LOW_REGOFFSET)  /*!< ADC analog watchdog threshold low */
+/**
+  * @}
+  */
+
+#if defined(ADC_MULTIMODE_SUPPORT)
+/** @defgroup ADC_LL_EC_MULTI_MODE  Multimode - Mode
+  * @{
+  */
+#define LL_ADC_MULTI_INDEPENDENT           0x00000000UL                                                             /*!< ADC dual mode disabled (ADC independent mode) */
+#define LL_ADC_MULTI_DUAL_REG_SIMULT       (                  ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1                  ) /*!< ADC dual mode enabled: group regular simultaneous */
+#define LL_ADC_MULTI_DUAL_REG_INTERL       (                  ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0) /*!< ADC dual mode enabled: Combined group regular interleaved */
+#define LL_ADC_MULTI_DUAL_INJ_SIMULT       (                  ADC_CCR_MULTI_2                   | ADC_CCR_MULTI_0) /*!< ADC dual mode enabled: group injected simultaneous */
+#define LL_ADC_MULTI_DUAL_INJ_ALTERN       (ADC_CCR_MULTI_3                                     | ADC_CCR_MULTI_0) /*!< ADC dual mode enabled: group injected alternate trigger. Works only with external triggers (not internal SW start) */
+#define LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM  (                                                      ADC_CCR_MULTI_0) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected simultaneous */
+#define LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT  (                                    ADC_CCR_MULTI_1                  ) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected alternate trigger */
+#define LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM  (                                    ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0) /*!< ADC dual mode enabled: Combined group regular interleaved + group injected simultaneous */
+#if defined(ADC3)
+#define LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_SIM  (ADC_CCR_MULTI_4                                                       | ADC_CCR_MULTI_0) /*!< ADC triple mode enabled: Combined group regular simultaneous + group injected simultaneous */
+#define LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_ALT  (ADC_CCR_MULTI_4                                     | ADC_CCR_MULTI_1                  ) /*!< ADC triple mode enabled: Combined group regular simultaneous + group injected alternate trigger */
+#define LL_ADC_MULTI_TRIPLE_INJ_SIMULT       (ADC_CCR_MULTI_4                   | ADC_CCR_MULTI_2                   | ADC_CCR_MULTI_0) /*!< ADC triple mode enabled: group injected simultaneous */
+#define LL_ADC_MULTI_TRIPLE_REG_SIMULT       (ADC_CCR_MULTI_4                   | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1                  ) /*!< ADC triple mode enabled: group regular simultaneous */
+#define LL_ADC_MULTI_TRIPLE_REG_INTERL       (ADC_CCR_MULTI_4                   | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0) /*!< ADC triple mode enabled: Combined group regular interleaved */
+#define LL_ADC_MULTI_TRIPLE_INJ_ALTERN       (ADC_CCR_MULTI_4                                                       | ADC_CCR_MULTI_0) /*!< ADC triple mode enabled: group injected alternate trigger. Works only with external triggers (not internal SW start) */
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_MULTI_DMA_TRANSFER  Multimode - DMA transfer
+  * @{
+  */
+#define LL_ADC_MULTI_REG_DMA_EACH_ADC        0x00000000UL                                   /*!< ADC multimode group regular conversions are transferred by DMA: each ADC uses its own DMA channel, with its individual DMA transfer settings */
+#define LL_ADC_MULTI_REG_DMA_LIMIT_1         (                              ADC_CCR_DMA_0) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for all ADC instances (DMA of ADC master), in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting of DMA mode 1: 2 or 3 (dual or triple mode) half-words one by one, ADC1 then ADC2 then ADC3. */
+#define LL_ADC_MULTI_REG_DMA_LIMIT_2         (              ADC_CCR_DMA_1                ) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for all ADC instances (DMA of ADC master), in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting of DMA mode 2: 2 or 3 (dual or triple mode) half-words one by one, ADC2&1 then ADC1&3 then ADC3&2. */
+#define LL_ADC_MULTI_REG_DMA_LIMIT_3         (              ADC_CCR_DMA_1 | ADC_CCR_DMA_0) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for all ADC instances (DMA of ADC master), in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting of DMA mode 3: 2 or 3 (dual or triple mode) bytes one by one, ADC2&1 then ADC1&3 then ADC3&2. */
+#define LL_ADC_MULTI_REG_DMA_UNLMT_1         (ADC_CCR_DDS |                 ADC_CCR_DMA_0) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for all ADC instances (DMA of ADC master), in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting of DMA mode 1: 2 or 3 (dual or triple mode) half-words one by one, ADC1 then ADC2 then ADC3. */
+#define LL_ADC_MULTI_REG_DMA_UNLMT_2         (ADC_CCR_DDS | ADC_CCR_DMA_1                ) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for all ADC instances (DMA of ADC master), in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting of DMA mode 2: 2 or 3 (dual or triple mode) half-words by pairs, ADC2&1 then ADC1&3 then ADC3&2. */
+#define LL_ADC_MULTI_REG_DMA_UNLMT_3         (ADC_CCR_DDS | ADC_CCR_DMA_1 | ADC_CCR_DMA_0) /*!< ADC multimode group regular conversions are transferred by DMA, one DMA channel for all ADC instances (DMA of ADC master), in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. Setting of DMA mode 3: 2 or 3 (dual or triple mode) bytes one by one, ADC2&1 then ADC1&3 then ADC3&2. */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_MULTI_TWOSMP_DELAY  Multimode - Delay between two sampling phases
+  * @{
+  */
+#define LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES  0x00000000UL                                                             /*!< ADC multimode delay between two sampling phases: 5 ADC clock cycles*/
+#define LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES  (                                                      ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 6 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES  (                                    ADC_CCR_DELAY_1                  ) /*!< ADC multimode delay between two sampling phases: 7 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES  (                                    ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 8 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES  (                  ADC_CCR_DELAY_2                                    ) /*!< ADC multimode delay between two sampling phases: 9 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES (                  ADC_CCR_DELAY_2                   | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 10 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES (                  ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1                  ) /*!< ADC multimode delay between two sampling phases: 11 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES (                  ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 12 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_13CYCLES (ADC_CCR_DELAY_3                                                      ) /*!< ADC multimode delay between two sampling phases: 13 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES (ADC_CCR_DELAY_3                                     | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 14 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_15CYCLES (ADC_CCR_DELAY_3                   | ADC_CCR_DELAY_1                  ) /*!< ADC multimode delay between two sampling phases: 15 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_16CYCLES (ADC_CCR_DELAY_3                   | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 16 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_17CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2                                    ) /*!< ADC multimode delay between two sampling phases: 17 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_18CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2                   | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 18 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_19CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1                  ) /*!< ADC multimode delay between two sampling phases: 19 ADC clock cycles */
+#define LL_ADC_MULTI_TWOSMP_DELAY_20CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two sampling phases: 20 ADC clock cycles */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EC_MULTI_MASTER_SLAVE  Multimode - ADC master or slave
+  * @{
+  */
+#define LL_ADC_MULTI_MASTER                (                    ADC_CDR_RDATA_MST) /*!< In multimode, selection among several ADC instances: ADC master */
+#define LL_ADC_MULTI_SLAVE                 (ADC_CDR_RDATA_SLV                    ) /*!< In multimode, selection among several ADC instances: ADC slave */
+#define LL_ADC_MULTI_MASTER_SLAVE          (ADC_CDR_RDATA_SLV | ADC_CDR_RDATA_MST) /*!< In multimode, selection among several ADC instances: both ADC master and ADC slave */
+/**
+  * @}
+  */
+
+#endif /* ADC_MULTIMODE_SUPPORT */
+
+
+/** @defgroup ADC_LL_EC_HW_DELAYS  Definitions of ADC hardware constraints delays
+  * @note   Only ADC IP HW delays are defined in ADC LL driver driver,
+  *         not timeout values.
+  *         For details on delays values, refer to descriptions in source code
+  *         above each literal definition.
+  * @{
+  */
+  
+/* Note: Only ADC IP HW delays are defined in ADC LL driver driver,           */
+/*       not timeout values.                                                  */
+/*       Timeout values for ADC operations are dependent to device clock      */
+/*       configuration (system clock versus ADC clock),                       */
+/*       and therefore must be defined in user application.                   */
+/*       Indications for estimation of ADC timeout delays, for this           */
+/*       STM32 series:                                                        */
+/*       - ADC enable time: maximum delay is 2us                              */
+/*         (refer to device datasheet, parameter "tSTAB")                     */
+/*       - ADC conversion time: duration depending on ADC clock and ADC       */
+/*         configuration.                                                     */
+/*         (refer to device reference manual, section "Timing")               */
+
+/* Delay for internal voltage reference stabilization time.                   */
+/* Delay set to maximum value (refer to device datasheet,                     */
+/* parameter "tSTART").                                                       */
+/* Unit: us                                                                   */
+#define LL_ADC_DELAY_VREFINT_STAB_US       (  10UL)  /*!< Delay for internal voltage reference stabilization time */
+
+/* Delay for temperature sensor stabilization time.                           */
+/* Literal set to maximum value (refer to device datasheet,                   */
+/* parameter "tSTART").                                                       */
+/* Unit: us                                                                   */
+#define LL_ADC_DELAY_TEMPSENSOR_STAB_US    (  10UL)  /*!< Delay for internal voltage reference stabilization time */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ADC_LL_Exported_Macros ADC Exported Macros
+  * @{
+  */
+
+/** @defgroup ADC_LL_EM_WRITE_READ Common write and read registers Macros
+  * @{
+  */
+
+/**
+  * @brief  Write a value in ADC register
+  * @param  __INSTANCE__ ADC Instance
+  * @param  __REG__ Register to be written
+  * @param  __VALUE__ Value to be written in the register
+  * @retval None
+  */
+#define LL_ADC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+  * @brief  Read a value in ADC register
+  * @param  __INSTANCE__ ADC Instance
+  * @param  __REG__ Register to be read
+  * @retval Register value
+  */
+#define LL_ADC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EM_HELPER_MACRO ADC helper macro
+  * @{
+  */
+
+/**
+  * @brief  Helper macro to get ADC channel number in decimal format
+  *         from literals LL_ADC_CHANNEL_x.
+  * @note   Example:
+  *           __LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_CHANNEL_4)
+  *           will return decimal number "4".
+  * @note   The input can be a value from functions where a channel
+  *         number is returned, either defined with number
+  *         or with bitfield (only one bit must be set).
+  * @param  __CHANNEL__ This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_CHANNEL_0
+  *         @arg @ref LL_ADC_CHANNEL_1
+  *         @arg @ref LL_ADC_CHANNEL_2
+  *         @arg @ref LL_ADC_CHANNEL_3
+  *         @arg @ref LL_ADC_CHANNEL_4
+  *         @arg @ref LL_ADC_CHANNEL_5
+  *         @arg @ref LL_ADC_CHANNEL_6
+  *         @arg @ref LL_ADC_CHANNEL_7
+  *         @arg @ref LL_ADC_CHANNEL_8
+  *         @arg @ref LL_ADC_CHANNEL_9
+  *         @arg @ref LL_ADC_CHANNEL_10
+  *         @arg @ref LL_ADC_CHANNEL_11
+  *         @arg @ref LL_ADC_CHANNEL_12
+  *         @arg @ref LL_ADC_CHANNEL_13
+  *         @arg @ref LL_ADC_CHANNEL_14
+  *         @arg @ref LL_ADC_CHANNEL_15
+  *         @arg @ref LL_ADC_CHANNEL_16
+  *         @arg @ref LL_ADC_CHANNEL_17
+  *         @arg @ref LL_ADC_CHANNEL_18
+  *         @arg @ref LL_ADC_CHANNEL_VREFINT      (1)
+  *         @arg @ref LL_ADC_CHANNEL_TEMPSENSOR   (1)(2)
+  *         @arg @ref LL_ADC_CHANNEL_VBAT         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.\n
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.
+  * @retval Value between Min_Data=0 and Max_Data=18
+  */
+#define __LL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__)                                        \
+  (((__CHANNEL__) & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS)
+
+/**
+  * @brief  Helper macro to get ADC channel in literal format LL_ADC_CHANNEL_x
+  *         from number in decimal format.
+  * @note   Example:
+  *           __LL_ADC_DECIMAL_NB_TO_CHANNEL(4)
+  *           will return a data equivalent to "LL_ADC_CHANNEL_4".
+  * @param  __DECIMAL_NB__ Value between Min_Data=0 and Max_Data=18
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_CHANNEL_0
+  *         @arg @ref LL_ADC_CHANNEL_1
+  *         @arg @ref LL_ADC_CHANNEL_2
+  *         @arg @ref LL_ADC_CHANNEL_3
+  *         @arg @ref LL_ADC_CHANNEL_4
+  *         @arg @ref LL_ADC_CHANNEL_5
+  *         @arg @ref LL_ADC_CHANNEL_6
+  *         @arg @ref LL_ADC_CHANNEL_7
+  *         @arg @ref LL_ADC_CHANNEL_8
+  *         @arg @ref LL_ADC_CHANNEL_9
+  *         @arg @ref LL_ADC_CHANNEL_10
+  *         @arg @ref LL_ADC_CHANNEL_11
+  *         @arg @ref LL_ADC_CHANNEL_12
+  *         @arg @ref LL_ADC_CHANNEL_13
+  *         @arg @ref LL_ADC_CHANNEL_14
+  *         @arg @ref LL_ADC_CHANNEL_15
+  *         @arg @ref LL_ADC_CHANNEL_16
+  *         @arg @ref LL_ADC_CHANNEL_17
+  *         @arg @ref LL_ADC_CHANNEL_18
+  *         @arg @ref LL_ADC_CHANNEL_VREFINT      (1)
+  *         @arg @ref LL_ADC_CHANNEL_TEMPSENSOR   (1)(2)
+  *         @arg @ref LL_ADC_CHANNEL_VBAT         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.\n
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.\n
+  *         (1) For ADC channel read back from ADC register,
+  *             comparison with internal channel parameter to be done
+  *             using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL().
+  */
+#define __LL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__)                                                          \
+  (((__DECIMAL_NB__) <= 9UL)                                                                                     \
+    ? (                                                                                                         \
+       ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS)                                       |        \
+       (ADC_SMPR2_REGOFFSET | (((uint32_t) (3UL * (__DECIMAL_NB__))) << ADC_CHANNEL_SMPx_BITOFFSET_POS))         \
+      )                                                                                                         \
+      :                                                                                                         \
+      (                                                                                                         \
+       ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS)                                              | \
+       (ADC_SMPR1_REGOFFSET | (((uint32_t) (3UL * ((__DECIMAL_NB__) - 10UL))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \
+      )                                                                                                         \
+  )
+
+/**
+  * @brief  Helper macro to determine whether the selected channel
+  *         corresponds to literal definitions of driver.
+  * @note   The different literal definitions of ADC channels are:
+  *         - ADC internal channel:
+  *           LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ...
+  *         - ADC external channel (channel connected to a GPIO pin):
+  *           LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...
+  * @note   The channel parameter must be a value defined from literal
+  *         definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT,
+  *         LL_ADC_CHANNEL_TEMPSENSOR, ...),
+  *         ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...),
+  *         must not be a value from functions where a channel number is
+  *         returned from ADC registers,
+  *         because internal and external channels share the same channel
+  *         number in ADC registers. The differentiation is made only with
+  *         parameters definitions of driver.
+  * @param  __CHANNEL__ This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_CHANNEL_0
+  *         @arg @ref LL_ADC_CHANNEL_1
+  *         @arg @ref LL_ADC_CHANNEL_2
+  *         @arg @ref LL_ADC_CHANNEL_3
+  *         @arg @ref LL_ADC_CHANNEL_4
+  *         @arg @ref LL_ADC_CHANNEL_5
+  *         @arg @ref LL_ADC_CHANNEL_6
+  *         @arg @ref LL_ADC_CHANNEL_7
+  *         @arg @ref LL_ADC_CHANNEL_8
+  *         @arg @ref LL_ADC_CHANNEL_9
+  *         @arg @ref LL_ADC_CHANNEL_10
+  *         @arg @ref LL_ADC_CHANNEL_11
+  *         @arg @ref LL_ADC_CHANNEL_12
+  *         @arg @ref LL_ADC_CHANNEL_13
+  *         @arg @ref LL_ADC_CHANNEL_14
+  *         @arg @ref LL_ADC_CHANNEL_15
+  *         @arg @ref LL_ADC_CHANNEL_16
+  *         @arg @ref LL_ADC_CHANNEL_17
+  *         @arg @ref LL_ADC_CHANNEL_18
+  *         @arg @ref LL_ADC_CHANNEL_VREFINT      (1)
+  *         @arg @ref LL_ADC_CHANNEL_TEMPSENSOR   (1)(2)
+  *         @arg @ref LL_ADC_CHANNEL_VBAT         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.\n
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.
+  * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel connected to a GPIO pin).
+  *         Value "1" if the channel corresponds to a parameter definition of a ADC internal channel.
+  */
+#define __LL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__)                              \
+  (((__CHANNEL__) & ADC_CHANNEL_ID_INTERNAL_CH_MASK) != 0UL)
+
+/**
+  * @brief  Helper macro to convert a channel defined from parameter
+  *         definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT,
+  *         LL_ADC_CHANNEL_TEMPSENSOR, ...),
+  *         to its equivalent parameter definition of a ADC external channel
+  *         (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...).
+  * @note   The channel parameter can be, additionally to a value
+  *         defined from parameter definition of a ADC internal channel
+  *         (LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ...),
+  *         a value defined from parameter definition of
+  *         ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...)
+  *         or a value from functions where a channel number is returned
+  *         from ADC registers.
+  * @param  __CHANNEL__ This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_CHANNEL_0
+  *         @arg @ref LL_ADC_CHANNEL_1
+  *         @arg @ref LL_ADC_CHANNEL_2
+  *         @arg @ref LL_ADC_CHANNEL_3
+  *         @arg @ref LL_ADC_CHANNEL_4
+  *         @arg @ref LL_ADC_CHANNEL_5
+  *         @arg @ref LL_ADC_CHANNEL_6
+  *         @arg @ref LL_ADC_CHANNEL_7
+  *         @arg @ref LL_ADC_CHANNEL_8
+  *         @arg @ref LL_ADC_CHANNEL_9
+  *         @arg @ref LL_ADC_CHANNEL_10
+  *         @arg @ref LL_ADC_CHANNEL_11
+  *         @arg @ref LL_ADC_CHANNEL_12
+  *         @arg @ref LL_ADC_CHANNEL_13
+  *         @arg @ref LL_ADC_CHANNEL_14
+  *         @arg @ref LL_ADC_CHANNEL_15
+  *         @arg @ref LL_ADC_CHANNEL_16
+  *         @arg @ref LL_ADC_CHANNEL_17
+  *         @arg @ref LL_ADC_CHANNEL_18
+  *         @arg @ref LL_ADC_CHANNEL_VREFINT      (1)
+  *         @arg @ref LL_ADC_CHANNEL_TEMPSENSOR   (1)(2)
+  *         @arg @ref LL_ADC_CHANNEL_VBAT         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.\n
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_CHANNEL_0
+  *         @arg @ref LL_ADC_CHANNEL_1
+  *         @arg @ref LL_ADC_CHANNEL_2
+  *         @arg @ref LL_ADC_CHANNEL_3
+  *         @arg @ref LL_ADC_CHANNEL_4
+  *         @arg @ref LL_ADC_CHANNEL_5
+  *         @arg @ref LL_ADC_CHANNEL_6
+  *         @arg @ref LL_ADC_CHANNEL_7
+  *         @arg @ref LL_ADC_CHANNEL_8
+  *         @arg @ref LL_ADC_CHANNEL_9
+  *         @arg @ref LL_ADC_CHANNEL_10
+  *         @arg @ref LL_ADC_CHANNEL_11
+  *         @arg @ref LL_ADC_CHANNEL_12
+  *         @arg @ref LL_ADC_CHANNEL_13
+  *         @arg @ref LL_ADC_CHANNEL_14
+  *         @arg @ref LL_ADC_CHANNEL_15
+  *         @arg @ref LL_ADC_CHANNEL_16
+  *         @arg @ref LL_ADC_CHANNEL_17
+  *         @arg @ref LL_ADC_CHANNEL_18
+  */
+#define __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__)                     \
+  ((__CHANNEL__) & ~ADC_CHANNEL_ID_INTERNAL_CH_MASK)
+
+/**
+  * @brief  Helper macro to determine whether the internal channel
+  *         selected is available on the ADC instance selected.
+  * @note   The channel parameter must be a value defined from parameter
+  *         definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT,
+  *         LL_ADC_CHANNEL_TEMPSENSOR, ...),
+  *         must not be a value defined from parameter definition of
+  *         ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...)
+  *         or a value from functions where a channel number is
+  *         returned from ADC registers,
+  *         because internal and external channels share the same channel
+  *         number in ADC registers. The differentiation is made only with
+  *         parameters definitions of driver.
+  * @param  __ADC_INSTANCE__ ADC instance
+  * @param  __CHANNEL__ This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_CHANNEL_VREFINT      (1)
+  *         @arg @ref LL_ADC_CHANNEL_TEMPSENSOR   (1)(2)
+  *         @arg @ref LL_ADC_CHANNEL_VBAT         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.
+  * @retval Value "0" if the internal channel selected is not available on the ADC instance selected.
+  *         Value "1" if the internal channel selected is available on the ADC instance selected.
+  */
+#define __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__)  \
+  (                                                                            \
+   ((__CHANNEL__) == LL_ADC_CHANNEL_VREFINT)    ||                             \
+   ((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) ||                             \
+   ((__CHANNEL__) == LL_ADC_CHANNEL_VBAT)                                      \
+  )
+/**
+  * @brief  Helper macro to define ADC analog watchdog parameter:
+  *         define a single channel to monitor with analog watchdog
+  *         from sequencer channel and groups definition.
+  * @note   To be used with function @ref LL_ADC_SetAnalogWDMonitChannels().
+  *         Example:
+  *           LL_ADC_SetAnalogWDMonitChannels(
+  *             ADC1, LL_ADC_AWD1,
+  *             __LL_ADC_ANALOGWD_CHANNEL_GROUP(LL_ADC_CHANNEL4, LL_ADC_GROUP_REGULAR))
+  * @param  __CHANNEL__ This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_CHANNEL_0
+  *         @arg @ref LL_ADC_CHANNEL_1
+  *         @arg @ref LL_ADC_CHANNEL_2
+  *         @arg @ref LL_ADC_CHANNEL_3
+  *         @arg @ref LL_ADC_CHANNEL_4
+  *         @arg @ref LL_ADC_CHANNEL_5
+  *         @arg @ref LL_ADC_CHANNEL_6
+  *         @arg @ref LL_ADC_CHANNEL_7
+  *         @arg @ref LL_ADC_CHANNEL_8
+  *         @arg @ref LL_ADC_CHANNEL_9
+  *         @arg @ref LL_ADC_CHANNEL_10
+  *         @arg @ref LL_ADC_CHANNEL_11
+  *         @arg @ref LL_ADC_CHANNEL_12
+  *         @arg @ref LL_ADC_CHANNEL_13
+  *         @arg @ref LL_ADC_CHANNEL_14
+  *         @arg @ref LL_ADC_CHANNEL_15
+  *         @arg @ref LL_ADC_CHANNEL_16
+  *         @arg @ref LL_ADC_CHANNEL_17
+  *         @arg @ref LL_ADC_CHANNEL_18
+  *         @arg @ref LL_ADC_CHANNEL_VREFINT      (1)
+  *         @arg @ref LL_ADC_CHANNEL_TEMPSENSOR   (1)(2)
+  *         @arg @ref LL_ADC_CHANNEL_VBAT         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.\n
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.\n
+  *         (1) For ADC channel read back from ADC register,
+  *             comparison with internal channel parameter to be done
+  *             using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL().
+  * @param  __GROUP__ This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_GROUP_REGULAR
+  *         @arg @ref LL_ADC_GROUP_INJECTED
+  *         @arg @ref LL_ADC_GROUP_REGULAR_INJECTED
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_AWD_DISABLE
+  *         @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG
+  *         @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ
+  *         @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_0_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_0_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_1_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_1_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_2_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_2_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_3_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_3_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_4_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_4_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_5_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_5_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_6_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_6_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_7_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_7_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_8_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_8_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_9_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_9_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_10_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_10_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_11_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_11_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_12_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_12_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_13_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_13_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_14_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_14_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_15_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_15_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_16_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_16_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_17_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_17_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_18_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_18_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CH_VREFINT_REG          (1)
+  *         @arg @ref LL_ADC_AWD_CH_VREFINT_INJ          (1)
+  *         @arg @ref LL_ADC_AWD_CH_VREFINT_REG_INJ      (1)
+  *         @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG       (1)(2)
+  *         @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ       (1)(2)
+  *         @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ   (1)(2)
+  *         @arg @ref LL_ADC_AWD_CH_VBAT_REG             (1)
+  *         @arg @ref LL_ADC_AWD_CH_VBAT_INJ             (1)
+  *         @arg @ref LL_ADC_AWD_CH_VBAT_REG_INJ         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.\n
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.
+  */
+#define __LL_ADC_ANALOGWD_CHANNEL_GROUP(__CHANNEL__, __GROUP__)                                           \
+  (((__GROUP__) == LL_ADC_GROUP_REGULAR)                                                                  \
+    ? (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL)                            \
+      :                                                                                                   \
+      ((__GROUP__) == LL_ADC_GROUP_INJECTED)                                                              \
+       ? (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL)                        \
+         :                                                                                                \
+         (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL)        \
+  )
+
+/**
+  * @brief  Helper macro to set the value of ADC analog watchdog threshold high
+  *         or low in function of ADC resolution, when ADC resolution is
+  *         different of 12 bits.
+  * @note   To be used with function @ref LL_ADC_SetAnalogWDThresholds().
+  *         Example, with a ADC resolution of 8 bits, to set the value of
+  *         analog watchdog threshold high (on 8 bits):
+  *           LL_ADC_SetAnalogWDThresholds
+  *            (< ADCx param >,
+  *             __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(LL_ADC_RESOLUTION_8B, <threshold_value_8_bits>)
+  *            );
+  * @param  __ADC_RESOLUTION__ This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_RESOLUTION_12B
+  *         @arg @ref LL_ADC_RESOLUTION_10B
+  *         @arg @ref LL_ADC_RESOLUTION_8B
+  *         @arg @ref LL_ADC_RESOLUTION_6B
+  * @param  __AWD_THRESHOLD__ Value between Min_Data=0x000 and Max_Data=0xFFF
+  * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
+  */
+#define __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD__) \
+  ((__AWD_THRESHOLD__) << ((__ADC_RESOLUTION__) >> (ADC_CR1_RES_BITOFFSET_POS - 1UL )))
+
+/**
+  * @brief  Helper macro to get the value of ADC analog watchdog threshold high
+  *         or low in function of ADC resolution, when ADC resolution is 
+  *         different of 12 bits.
+  * @note   To be used with function @ref LL_ADC_GetAnalogWDThresholds().
+  *         Example, with a ADC resolution of 8 bits, to get the value of
+  *         analog watchdog threshold high (on 8 bits):
+  *           < threshold_value_6_bits > = __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION
+  *            (LL_ADC_RESOLUTION_8B,
+  *             LL_ADC_GetAnalogWDThresholds(<ADCx param>, LL_ADC_AWD_THRESHOLD_HIGH)
+  *            );
+  * @param  __ADC_RESOLUTION__ This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_RESOLUTION_12B
+  *         @arg @ref LL_ADC_RESOLUTION_10B
+  *         @arg @ref LL_ADC_RESOLUTION_8B
+  *         @arg @ref LL_ADC_RESOLUTION_6B
+  * @param  __AWD_THRESHOLD_12_BITS__ Value between Min_Data=0x000 and Max_Data=0xFFF
+  * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
+  */
+#define __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD_12_BITS__) \
+  ((__AWD_THRESHOLD_12_BITS__) >> ((__ADC_RESOLUTION__) >> (ADC_CR1_RES_BITOFFSET_POS - 1UL )))
+
+#if defined(ADC_MULTIMODE_SUPPORT)
+/**
+  * @brief  Helper macro to get the ADC multimode conversion data of ADC master
+  *         or ADC slave from raw value with both ADC conversion data concatenated.
+  * @note   This macro is intended to be used when multimode transfer by DMA
+  *         is enabled: refer to function @ref LL_ADC_SetMultiDMATransfer().
+  *         In this case the transferred data need to processed with this macro
+  *         to separate the conversion data of ADC master and ADC slave.
+  * @param  __ADC_MULTI_MASTER_SLAVE__ This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_MULTI_MASTER
+  *         @arg @ref LL_ADC_MULTI_SLAVE
+  * @param  __ADC_MULTI_CONV_DATA__ Value between Min_Data=0x000 and Max_Data=0xFFF
+  * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
+  */
+#define __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE(__ADC_MULTI_MASTER_SLAVE__, __ADC_MULTI_CONV_DATA__)  \
+  (((__ADC_MULTI_CONV_DATA__) >> POSITION_VAL((__ADC_MULTI_MASTER_SLAVE__))) & ADC_CDR_RDATA_MST)
+#endif
+
+/**
+  * @brief  Helper macro to select the ADC common instance
+  *         to which is belonging the selected ADC instance.
+  * @note   ADC common register instance can be used for:
+  *         - Set parameters common to several ADC instances
+  *         - Multimode (for devices with several ADC instances)
+  *         Refer to functions having argument "ADCxy_COMMON" as parameter.
+  * @param  __ADCx__ ADC instance
+  * @retval ADC common register instance
+  */
+#if defined(ADC1) && defined(ADC2) && defined(ADC3)
+#define __LL_ADC_COMMON_INSTANCE(__ADCx__)                                     \
+  (ADC123_COMMON)
+#elif defined(ADC1) && defined(ADC2)
+#define __LL_ADC_COMMON_INSTANCE(__ADCx__)                                     \
+  (ADC12_COMMON)
+#else
+#define __LL_ADC_COMMON_INSTANCE(__ADCx__)                                     \
+  (ADC1_COMMON)
+#endif
+
+/**
+  * @brief  Helper macro to check if all ADC instances sharing the same
+  *         ADC common instance are disabled.
+  * @note   This check is required by functions with setting conditioned to
+  *         ADC state:
+  *         All ADC instances of the ADC common group must be disabled.
+  *         Refer to functions having argument "ADCxy_COMMON" as parameter.
+  * @note   On devices with only 1 ADC common instance, parameter of this macro
+  *         is useless and can be ignored (parameter kept for compatibility
+  *         with devices featuring several ADC common instances).
+  * @param  __ADCXY_COMMON__ ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval Value "0" if all ADC instances sharing the same ADC common instance
+  *         are disabled.
+  *         Value "1" if at least one ADC instance sharing the same ADC common instance
+  *         is enabled.
+  */
+#if defined(ADC1) && defined(ADC2) && defined(ADC3)
+#define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__)              \
+  (LL_ADC_IsEnabled(ADC1) |                                                    \
+   LL_ADC_IsEnabled(ADC2) |                                                    \
+   LL_ADC_IsEnabled(ADC3)  )
+#elif defined(ADC1) && defined(ADC2)
+#define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__)              \
+  (LL_ADC_IsEnabled(ADC1) |                                                    \
+   LL_ADC_IsEnabled(ADC2)  )
+#else
+#define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__)              \
+  (LL_ADC_IsEnabled(ADC1))
+#endif
+
+/**
+  * @brief  Helper macro to define the ADC conversion data full-scale digital
+  *         value corresponding to the selected ADC resolution.
+  * @note   ADC conversion data full-scale corresponds to voltage range
+  *         determined by analog voltage references Vref+ and Vref-
+  *         (refer to reference manual).
+  * @param  __ADC_RESOLUTION__ This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_RESOLUTION_12B
+  *         @arg @ref LL_ADC_RESOLUTION_10B
+  *         @arg @ref LL_ADC_RESOLUTION_8B
+  *         @arg @ref LL_ADC_RESOLUTION_6B
+  * @retval ADC conversion data equivalent voltage value (unit: mVolt)
+  */
+#define __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__)                             \
+  (0xFFFU >> ((__ADC_RESOLUTION__) >> (ADC_CR1_RES_BITOFFSET_POS - 1UL)))
+
+/**
+  * @brief  Helper macro to convert the ADC conversion data from
+  *         a resolution to another resolution.
+  * @param  __DATA__ ADC conversion data to be converted 
+  * @param  __ADC_RESOLUTION_CURRENT__ Resolution of to the data to be converted
+  *         This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_RESOLUTION_12B
+  *         @arg @ref LL_ADC_RESOLUTION_10B
+  *         @arg @ref LL_ADC_RESOLUTION_8B
+  *         @arg @ref LL_ADC_RESOLUTION_6B
+  * @param  __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion
+  *         This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_RESOLUTION_12B
+  *         @arg @ref LL_ADC_RESOLUTION_10B
+  *         @arg @ref LL_ADC_RESOLUTION_8B
+  *         @arg @ref LL_ADC_RESOLUTION_6B
+  * @retval ADC conversion data to the requested resolution
+  */
+#define __LL_ADC_CONVERT_DATA_RESOLUTION(__DATA__, __ADC_RESOLUTION_CURRENT__, __ADC_RESOLUTION_TARGET__) \
+  (((__DATA__)                                                                 \
+    << ((__ADC_RESOLUTION_CURRENT__) >> (ADC_CR1_RES_BITOFFSET_POS - 1UL)))     \
+   >> ((__ADC_RESOLUTION_TARGET__) >> (ADC_CR1_RES_BITOFFSET_POS - 1UL))        \
+  )
+
+/**
+  * @brief  Helper macro to calculate the voltage (unit: mVolt)
+  *         corresponding to a ADC conversion data (unit: digital value).
+  * @note   Analog reference voltage (Vref+) must be either known from
+  *         user board environment or can be calculated using ADC measurement
+  *         and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE().
+  * @param  __VREFANALOG_VOLTAGE__ Analog reference voltage (unit mV)
+  * @param  __ADC_DATA__ ADC conversion data (resolution 12 bits)
+  *                       (unit: digital value).
+  * @param  __ADC_RESOLUTION__ This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_RESOLUTION_12B
+  *         @arg @ref LL_ADC_RESOLUTION_10B
+  *         @arg @ref LL_ADC_RESOLUTION_8B
+  *         @arg @ref LL_ADC_RESOLUTION_6B
+  * @retval ADC conversion data equivalent voltage value (unit: mVolt)
+  */
+#define __LL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\
+                                      __ADC_DATA__,\
+                                      __ADC_RESOLUTION__)                      \
+  ((__ADC_DATA__) * (__VREFANALOG_VOLTAGE__)                                   \
+   / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__)                                \
+  )
+
+/**
+  * @brief  Helper macro to calculate analog reference voltage (Vref+)
+  *         (unit: mVolt) from ADC conversion data of internal voltage
+  *         reference VrefInt.
+  * @note   Computation is using VrefInt calibration value
+  *         stored in system memory for each device during production.
+  * @note   This voltage depends on user board environment: voltage level
+  *         connected to pin Vref+.
+  *         On devices with small package, the pin Vref+ is not present
+  *         and internally bonded to pin Vdda.
+  * @note   On this STM32 series, calibration data of internal voltage reference
+  *         VrefInt corresponds to a resolution of 12 bits,
+  *         this is the recommended ADC resolution to convert voltage of
+  *         internal voltage reference VrefInt.
+  *         Otherwise, this macro performs the processing to scale
+  *         ADC conversion data to 12 bits.
+  * @param  __VREFINT_ADC_DATA__ ADC conversion data (resolution 12 bits)
+  *         of internal voltage reference VrefInt (unit: digital value).
+  * @param  __ADC_RESOLUTION__ This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_RESOLUTION_12B
+  *         @arg @ref LL_ADC_RESOLUTION_10B
+  *         @arg @ref LL_ADC_RESOLUTION_8B
+  *         @arg @ref LL_ADC_RESOLUTION_6B
+  * @retval Analog reference voltage (unit: mV)
+  */
+#define __LL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\
+                                         __ADC_RESOLUTION__)                   \
+  (((uint32_t)(*VREFINT_CAL_ADDR) * VREFINT_CAL_VREF)                          \
+   / __LL_ADC_CONVERT_DATA_RESOLUTION((__VREFINT_ADC_DATA__),                  \
+                                      (__ADC_RESOLUTION__),                    \
+                                      LL_ADC_RESOLUTION_12B))
+
+/* Note: On device STM32F4x9, calibration parameter TS_CAL2 is not available. */
+/*       Therefore, helper macro __LL_ADC_CALC_TEMPERATURE() is not available.*/
+/*       Use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS().        */
+#if !defined(STM32F469) && !defined(STM32F479xx) && !defined(STM32F429xx) && !defined(STM32F439xx)
+/**
+  * @brief  Helper macro to calculate the temperature (unit: degree Celsius)
+  *         from ADC conversion data of internal temperature sensor.
+  * @note   Computation is using temperature sensor calibration values
+  *         stored in system memory for each device during production.
+  * @note   Calculation formula:
+  *           Temperature = ((TS_ADC_DATA - TS_CAL1)
+  *                           * (TS_CAL2_TEMP - TS_CAL1_TEMP))
+  *                         / (TS_CAL2 - TS_CAL1) + TS_CAL1_TEMP
+  *           with TS_ADC_DATA = temperature sensor raw data measured by ADC
+  *                Avg_Slope = (TS_CAL2 - TS_CAL1)
+  *                            / (TS_CAL2_TEMP - TS_CAL1_TEMP)
+  *                TS_CAL1   = equivalent TS_ADC_DATA at temperature
+  *                            TEMP_DEGC_CAL1 (calibrated in factory)
+  *                TS_CAL2   = equivalent TS_ADC_DATA at temperature
+  *                            TEMP_DEGC_CAL2 (calibrated in factory)
+  *         Caution: Calculation relevancy under reserve that calibration
+  *                  parameters are correct (address and data).
+  *                  To calculate temperature using temperature sensor
+  *                  datasheet typical values (generic values less, therefore
+  *                  less accurate than calibrated values),
+  *                  use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS().
+  * @note   As calculation input, the analog reference voltage (Vref+) must be
+  *         defined as it impacts the ADC LSB equivalent voltage.
+  * @note   Analog reference voltage (Vref+) must be either known from
+  *         user board environment or can be calculated using ADC measurement
+  *         and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE().
+  * @note   On this STM32 series, calibration data of temperature sensor
+  *         corresponds to a resolution of 12 bits,
+  *         this is the recommended ADC resolution to convert voltage of
+  *         temperature sensor.
+  *         Otherwise, this macro performs the processing to scale
+  *         ADC conversion data to 12 bits.
+  * @param  __VREFANALOG_VOLTAGE__  Analog reference voltage (unit mV)
+  * @param  __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal
+  *                                 temperature sensor (unit: digital value).
+  * @param  __ADC_RESOLUTION__      ADC resolution at which internal temperature
+  *                                 sensor voltage has been measured.
+  *         This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_RESOLUTION_12B
+  *         @arg @ref LL_ADC_RESOLUTION_10B
+  *         @arg @ref LL_ADC_RESOLUTION_8B
+  *         @arg @ref LL_ADC_RESOLUTION_6B
+  * @retval Temperature (unit: degree Celsius)
+  */
+#define __LL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\
+                                  __TEMPSENSOR_ADC_DATA__,\
+                                  __ADC_RESOLUTION__)                              \
+  (((( ((int32_t)((__LL_ADC_CONVERT_DATA_RESOLUTION((__TEMPSENSOR_ADC_DATA__),     \
+                                                    (__ADC_RESOLUTION__),          \
+                                                    LL_ADC_RESOLUTION_12B)         \
+                   * (__VREFANALOG_VOLTAGE__))                                     \
+                  / TEMPSENSOR_CAL_VREFANALOG)                                     \
+        - (int32_t) *TEMPSENSOR_CAL1_ADDR)                                         \
+     ) * (int32_t)(TEMPSENSOR_CAL2_TEMP - TEMPSENSOR_CAL1_TEMP)                    \
+    ) / (int32_t)((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) \
+   ) + TEMPSENSOR_CAL1_TEMP                                                        \
+  )
+#endif
+
+/**
+  * @brief  Helper macro to calculate the temperature (unit: degree Celsius)
+  *         from ADC conversion data of internal temperature sensor.
+  * @note   Computation is using temperature sensor typical values
+  *         (refer to device datasheet).
+  * @note   Calculation formula:
+  *           Temperature = (TS_TYP_CALx_VOLT(uV) - TS_ADC_DATA * Conversion_uV)
+  *                         / Avg_Slope + CALx_TEMP
+  *           with TS_ADC_DATA      = temperature sensor raw data measured by ADC
+  *                                   (unit: digital value)
+  *                Avg_Slope        = temperature sensor slope
+  *                                   (unit: uV/Degree Celsius)
+  *                TS_TYP_CALx_VOLT = temperature sensor digital value at
+  *                                   temperature CALx_TEMP (unit: mV)
+  *         Caution: Calculation relevancy under reserve the temperature sensor
+  *                  of the current device has characteristics in line with
+  *                  datasheet typical values.
+  *                  If temperature sensor calibration values are available on
+  *                  on this device (presence of macro __LL_ADC_CALC_TEMPERATURE()),
+  *                  temperature calculation will be more accurate using
+  *                  helper macro @ref __LL_ADC_CALC_TEMPERATURE().
+  * @note   As calculation input, the analog reference voltage (Vref+) must be
+  *         defined as it impacts the ADC LSB equivalent voltage.
+  * @note   Analog reference voltage (Vref+) must be either known from
+  *         user board environment or can be calculated using ADC measurement
+  *         and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE().
+  * @note   ADC measurement data must correspond to a resolution of 12bits
+  *         (full scale digital value 4095). If not the case, the data must be
+  *         preliminarily rescaled to an equivalent resolution of 12 bits.
+  * @param  __TEMPSENSOR_TYP_AVGSLOPE__   Device datasheet data Temperature sensor slope typical value (unit uV/DegCelsius).
+  *                                       On STM32F4, refer to device datasheet parameter "Avg_Slope".
+  * @param  __TEMPSENSOR_TYP_CALX_V__     Device datasheet data Temperature sensor voltage typical value (at temperature and Vref+ defined in parameters below) (unit mV).
+  *                                       On STM32F4, refer to device datasheet parameter "V25".
+  * @param  __TEMPSENSOR_CALX_TEMP__      Device datasheet data Temperature at which temperature sensor voltage (see parameter above) is corresponding (unit mV)
+  * @param  __VREFANALOG_VOLTAGE__        Analog voltage reference (Vref+) voltage (unit mV)
+  * @param  __TEMPSENSOR_ADC_DATA__       ADC conversion data of internal temperature sensor (unit digital value).
+  * @param  __ADC_RESOLUTION__            ADC resolution at which internal temperature sensor voltage has been measured.
+  *         This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_RESOLUTION_12B
+  *         @arg @ref LL_ADC_RESOLUTION_10B
+  *         @arg @ref LL_ADC_RESOLUTION_8B
+  *         @arg @ref LL_ADC_RESOLUTION_6B
+  * @retval Temperature (unit: degree Celsius)
+  */
+#define __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\
+                                             __TEMPSENSOR_TYP_CALX_V__,\
+                                             __TEMPSENSOR_CALX_TEMP__,\
+                                             __VREFANALOG_VOLTAGE__,\
+                                             __TEMPSENSOR_ADC_DATA__,\
+                                             __ADC_RESOLUTION__)               \
+  ((( (                                                                        \
+       (int32_t)(((__TEMPSENSOR_TYP_CALX_V__))                                 \
+                 * 1000)                                                       \
+       -                                                                       \
+       (int32_t)((((__TEMPSENSOR_ADC_DATA__) * (__VREFANALOG_VOLTAGE__))       \
+                  / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__))                \
+                 * 1000)                                                       \
+      )                                                                        \
+    ) / (__TEMPSENSOR_TYP_AVGSLOPE__)                                          \
+   ) + (__TEMPSENSOR_CALX_TEMP__)                                              \
+  )
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup ADC_LL_Exported_Functions ADC Exported Functions
+  * @{
+  */
+
+/** @defgroup ADC_LL_EF_DMA_Management ADC DMA management
+  * @{
+  */
+/* Note: LL ADC functions to set DMA transfer are located into sections of    */
+/*       configuration of ADC instance, groups and multimode (if available):  */
+/*       @ref LL_ADC_REG_SetDMATransfer(), ...                                */
+
+/**
+  * @brief  Function to help to configure DMA transfer from ADC: retrieve the
+  *         ADC register address from ADC instance and a list of ADC registers
+  *         intended to be used (most commonly) with DMA transfer.
+  * @note   These ADC registers are data registers:
+  *         when ADC conversion data is available in ADC data registers,
+  *         ADC generates a DMA transfer request.
+  * @note   This macro is intended to be used with LL DMA driver, refer to
+  *         function "LL_DMA_ConfigAddresses()".
+  *         Example:
+  *           LL_DMA_ConfigAddresses(DMA1,
+  *                                  LL_DMA_CHANNEL_1,
+  *                                  LL_ADC_DMA_GetRegAddr(ADC1, LL_ADC_DMA_REG_REGULAR_DATA),
+  *                                  (uint32_t)&< array or variable >,
+  *                                  LL_DMA_DIRECTION_PERIPH_TO_MEMORY);
+  * @note   For devices with several ADC: in multimode, some devices
+  *         use a different data register outside of ADC instance scope
+  *         (common data register). This macro manages this register difference,
+  *         only ADC instance has to be set as parameter.
+  * @rmtoll DR       RDATA          LL_ADC_DMA_GetRegAddr\n
+  *         CDR      RDATA_MST      LL_ADC_DMA_GetRegAddr\n
+  *         CDR      RDATA_SLV      LL_ADC_DMA_GetRegAddr
+  * @param  ADCx ADC instance
+  * @param  Register This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_DMA_REG_REGULAR_DATA
+  *         @arg @ref LL_ADC_DMA_REG_REGULAR_DATA_MULTI (1)
+  *         
+  *         (1) Available on devices with several ADC instances.
+  * @retval ADC register address
+  */
+#if defined(ADC_MULTIMODE_SUPPORT)
+__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Register)
+{
+  uint32_t data_reg_addr = 0UL;
+  
+  if (Register == LL_ADC_DMA_REG_REGULAR_DATA)
+  {
+    /* Retrieve address of register DR */
+    data_reg_addr = (uint32_t)&(ADCx->DR);
+  }
+  else /* (Register == LL_ADC_DMA_REG_REGULAR_DATA_MULTI) */
+  {
+    /* Retrieve address of register CDR */
+    data_reg_addr = (uint32_t)&((__LL_ADC_COMMON_INSTANCE(ADCx))->CDR);
+  }
+  
+  return data_reg_addr;
+}
+#else
+__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Register)
+{
+  /* Retrieve address of register DR */
+  return (uint32_t)&(ADCx->DR);
+}
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EF_Configuration_ADC_Common Configuration of ADC hierarchical scope: common to several ADC instances
+  * @{
+  */
+
+/**
+  * @brief  Set parameter common to several ADC: Clock source and prescaler.
+  * @rmtoll CCR      ADCPRE         LL_ADC_SetCommonClock
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @param  CommonClock This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2
+  *         @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4
+  *         @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV6
+  *         @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV8
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_SetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t CommonClock)
+{
+  MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_ADCPRE, CommonClock);
+}
+
+/**
+  * @brief  Get parameter common to several ADC: Clock source and prescaler.
+  * @rmtoll CCR      ADCPRE         LL_ADC_GetCommonClock
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2
+  *         @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4
+  *         @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV6
+  *         @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV8
+  */
+__STATIC_INLINE uint32_t LL_ADC_GetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_ADCPRE));
+}
+
+/**
+  * @brief  Set parameter common to several ADC: measurement path to internal
+  *         channels (VrefInt, temperature sensor, ...).
+  * @note   One or several values can be selected.
+  *         Example: (LL_ADC_PATH_INTERNAL_VREFINT |
+  *                   LL_ADC_PATH_INTERNAL_TEMPSENSOR)
+  * @note   Stabilization time of measurement path to internal channel:
+  *         After enabling internal paths, before starting ADC conversion,
+  *         a delay is required for internal voltage reference and
+  *         temperature sensor stabilization time.
+  *         Refer to device datasheet.
+  *         Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US.
+  *         Refer to literal @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US.
+  * @note   ADC internal channel sampling time constraint:
+  *         For ADC conversion of internal channels,
+  *         a sampling time minimum value is required.
+  *         Refer to device datasheet.
+  * @rmtoll CCR      TSVREFE        LL_ADC_SetCommonPathInternalCh\n
+  *         CCR      VBATE          LL_ADC_SetCommonPathInternalCh
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @param  PathInternal This parameter can be a combination of the following values:
+  *         @arg @ref LL_ADC_PATH_INTERNAL_NONE
+  *         @arg @ref LL_ADC_PATH_INTERNAL_VREFINT
+  *         @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR
+  *         @arg @ref LL_ADC_PATH_INTERNAL_VBAT
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_SetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal)
+{
+  MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_TSVREFE | ADC_CCR_VBATE, PathInternal);
+}
+
+/**
+  * @brief  Get parameter common to several ADC: measurement path to internal
+  *         channels (VrefInt, temperature sensor, ...).
+  * @note   One or several values can be selected.
+  *         Example: (LL_ADC_PATH_INTERNAL_VREFINT |
+  *                   LL_ADC_PATH_INTERNAL_TEMPSENSOR)
+  * @rmtoll CCR      TSVREFE        LL_ADC_GetCommonPathInternalCh\n
+  *         CCR      VBATE          LL_ADC_GetCommonPathInternalCh
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval Returned value can be a combination of the following values:
+  *         @arg @ref LL_ADC_PATH_INTERNAL_NONE
+  *         @arg @ref LL_ADC_PATH_INTERNAL_VREFINT
+  *         @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR
+  *         @arg @ref LL_ADC_PATH_INTERNAL_VBAT
+  */
+__STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_TSVREFE | ADC_CCR_VBATE));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EF_Configuration_ADC_Instance Configuration of ADC hierarchical scope: ADC instance
+  * @{
+  */
+
+/**
+  * @brief  Set ADC resolution.
+  *         Refer to reference manual for alignments formats
+  *         dependencies to ADC resolutions.
+  * @rmtoll CR1      RES            LL_ADC_SetResolution
+  * @param  ADCx ADC instance
+  * @param  Resolution This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_RESOLUTION_12B
+  *         @arg @ref LL_ADC_RESOLUTION_10B
+  *         @arg @ref LL_ADC_RESOLUTION_8B
+  *         @arg @ref LL_ADC_RESOLUTION_6B
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_SetResolution(ADC_TypeDef *ADCx, uint32_t Resolution)
+{
+  MODIFY_REG(ADCx->CR1, ADC_CR1_RES, Resolution);
+}
+
+/**
+  * @brief  Get ADC resolution.
+  *         Refer to reference manual for alignments formats
+  *         dependencies to ADC resolutions.
+  * @rmtoll CR1      RES            LL_ADC_GetResolution
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_RESOLUTION_12B
+  *         @arg @ref LL_ADC_RESOLUTION_10B
+  *         @arg @ref LL_ADC_RESOLUTION_8B
+  *         @arg @ref LL_ADC_RESOLUTION_6B
+  */
+__STATIC_INLINE uint32_t LL_ADC_GetResolution(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->CR1, ADC_CR1_RES));
+}
+
+/**
+  * @brief  Set ADC conversion data alignment.
+  * @note   Refer to reference manual for alignments formats
+  *         dependencies to ADC resolutions.
+  * @rmtoll CR2      ALIGN          LL_ADC_SetDataAlignment
+  * @param  ADCx ADC instance
+  * @param  DataAlignment This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_DATA_ALIGN_RIGHT
+  *         @arg @ref LL_ADC_DATA_ALIGN_LEFT
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_SetDataAlignment(ADC_TypeDef *ADCx, uint32_t DataAlignment)
+{
+  MODIFY_REG(ADCx->CR2, ADC_CR2_ALIGN, DataAlignment);
+}
+
+/**
+  * @brief  Get ADC conversion data alignment.
+  * @note   Refer to reference manual for alignments formats
+  *         dependencies to ADC resolutions.
+  * @rmtoll CR2      ALIGN          LL_ADC_SetDataAlignment
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_DATA_ALIGN_RIGHT
+  *         @arg @ref LL_ADC_DATA_ALIGN_LEFT
+  */
+__STATIC_INLINE uint32_t LL_ADC_GetDataAlignment(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_ALIGN));
+}
+
+/**
+  * @brief  Set ADC sequencers scan mode, for all ADC groups
+  *         (group regular, group injected).
+  * @note  According to sequencers scan mode :
+  *         - If disabled: ADC conversion is performed in unitary conversion
+  *           mode (one channel converted, that defined in rank 1).
+  *           Configuration of sequencers of all ADC groups
+  *           (sequencer scan length, ...) is discarded: equivalent to
+  *           scan length of 1 rank.
+  *         - If enabled: ADC conversions are performed in sequence conversions
+  *           mode, according to configuration of sequencers of
+  *           each ADC group (sequencer scan length, ...).
+  *           Refer to function @ref LL_ADC_REG_SetSequencerLength()
+  *           and to function @ref LL_ADC_INJ_SetSequencerLength().
+  * @rmtoll CR1      SCAN           LL_ADC_SetSequencersScanMode
+  * @param  ADCx ADC instance
+  * @param  ScanMode This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_SEQ_SCAN_DISABLE
+  *         @arg @ref LL_ADC_SEQ_SCAN_ENABLE
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_SetSequencersScanMode(ADC_TypeDef *ADCx, uint32_t ScanMode)
+{
+  MODIFY_REG(ADCx->CR1, ADC_CR1_SCAN, ScanMode);
+}
+
+/**
+  * @brief  Get ADC sequencers scan mode, for all ADC groups
+  *         (group regular, group injected).
+  * @note  According to sequencers scan mode :
+  *         - If disabled: ADC conversion is performed in unitary conversion
+  *           mode (one channel converted, that defined in rank 1).
+  *           Configuration of sequencers of all ADC groups
+  *           (sequencer scan length, ...) is discarded: equivalent to
+  *           scan length of 1 rank.
+  *         - If enabled: ADC conversions are performed in sequence conversions
+  *           mode, according to configuration of sequencers of
+  *           each ADC group (sequencer scan length, ...).
+  *           Refer to function @ref LL_ADC_REG_SetSequencerLength()
+  *           and to function @ref LL_ADC_INJ_SetSequencerLength().
+  * @rmtoll CR1      SCAN           LL_ADC_GetSequencersScanMode
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_SEQ_SCAN_DISABLE
+  *         @arg @ref LL_ADC_SEQ_SCAN_ENABLE
+  */
+__STATIC_INLINE uint32_t LL_ADC_GetSequencersScanMode(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->CR1, ADC_CR1_SCAN));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EF_Configuration_ADC_Group_Regular Configuration of ADC hierarchical scope: group regular
+  * @{
+  */
+
+/**
+  * @brief  Set ADC group regular conversion trigger source:
+  *         internal (SW start) or from external IP (timer event,
+  *         external interrupt line).
+  * @note   On this STM32 series, setting of external trigger edge is performed
+  *         using function @ref LL_ADC_REG_StartConversionExtTrig().
+  * @note   Availability of parameters of trigger sources from timer 
+  *         depends on timers availability on the selected device.
+  * @rmtoll CR2      EXTSEL         LL_ADC_REG_SetTriggerSource\n
+  *         CR2      EXTEN          LL_ADC_REG_SetTriggerSource
+  * @param  ADCx ADC instance
+  * @param  TriggerSource This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_REG_TRIG_SOFTWARE
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH1
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH2
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH3
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH2
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH3
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH4
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_CH1
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_CH4
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH1
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH2
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH3
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_CH1
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_TRGO
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_REG_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource)
+{
+/* Note: On this STM32 series, ADC group regular external trigger edge        */
+/*       is used to perform a ADC conversion start.                           */
+/*       This function does not set external trigger edge.                    */
+/*       This feature is set using function                                   */
+/*       @ref LL_ADC_REG_StartConversionExtTrig().                            */
+  MODIFY_REG(ADCx->CR2, ADC_CR2_EXTSEL, (TriggerSource & ADC_CR2_EXTSEL));
+}
+
+/**
+  * @brief  Get ADC group regular conversion trigger source:
+  *         internal (SW start) or from external IP (timer event,
+  *         external interrupt line).
+  * @note   To determine whether group regular trigger source is
+  *         internal (SW start) or external, without detail
+  *         of which peripheral is selected as external trigger,
+  *         (equivalent to 
+  *         "if(LL_ADC_REG_GetTriggerSource(ADC1) == LL_ADC_REG_TRIG_SOFTWARE)")
+  *         use function @ref LL_ADC_REG_IsTriggerSourceSWStart.
+  * @note   Availability of parameters of trigger sources from timer 
+  *         depends on timers availability on the selected device.
+  * @rmtoll CR2      EXTSEL         LL_ADC_REG_GetTriggerSource\n
+  *         CR2      EXTEN          LL_ADC_REG_GetTriggerSource
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_REG_TRIG_SOFTWARE
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH1
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH2
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH3
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH2
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH3
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH4
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_CH1
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_CH4
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH1
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH2
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM5_CH3
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_CH1
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_TIM8_TRGO
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11
+  */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(ADC_TypeDef *ADCx)
+{
+  uint32_t TriggerSource = READ_BIT(ADCx->CR2, ADC_CR2_EXTSEL | ADC_CR2_EXTEN);
+  
+  /* Value for shift of {0; 4; 8; 12} depending on value of bitfield          */
+  /* corresponding to ADC_CR2_EXTEN {0; 1; 2; 3}.                             */
+  uint32_t ShiftExten = ((TriggerSource & ADC_CR2_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2UL));
+  
+  /* Set bitfield corresponding to ADC_CR2_EXTEN and ADC_CR2_EXTSEL           */
+  /* to match with triggers literals definition.                              */
+  return ((TriggerSource
+           & (ADC_REG_TRIG_SOURCE_MASK << ShiftExten) & ADC_CR2_EXTSEL)
+          | ((ADC_REG_TRIG_EDGE_MASK << ShiftExten) & ADC_CR2_EXTEN)
+         );
+}
+
+/**
+  * @brief  Get ADC group regular conversion trigger source internal (SW start)
+            or external.
+  * @note   In case of group regular trigger source set to external trigger,
+  *         to determine which peripheral is selected as external trigger,
+  *         use function @ref LL_ADC_REG_GetTriggerSource().
+  * @rmtoll CR2      EXTEN          LL_ADC_REG_IsTriggerSourceSWStart
+  * @param  ADCx ADC instance
+  * @retval Value "0" if trigger source external trigger
+  *         Value "1" if trigger source SW start.
+  */
+__STATIC_INLINE uint32_t LL_ADC_REG_IsTriggerSourceSWStart(ADC_TypeDef *ADCx)
+{
+  return (READ_BIT(ADCx->CR2, ADC_CR2_EXTEN) == (LL_ADC_REG_TRIG_SOFTWARE & ADC_CR2_EXTEN));
+}
+
+/**
+  * @brief  Get ADC group regular conversion trigger polarity.
+  * @note   Applicable only for trigger source set to external trigger.
+  * @note   On this STM32 series, setting of external trigger edge is performed
+  *         using function @ref LL_ADC_REG_StartConversionExtTrig().
+  * @rmtoll CR2      EXTEN          LL_ADC_REG_GetTriggerEdge
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_RISING
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_FALLING
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING
+  */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_EXTEN));
+}
+
+
+/**
+  * @brief  Set ADC group regular sequencer length and scan direction.
+  * @note   Description of ADC group regular sequencer features:
+  *         - For devices with sequencer fully configurable
+  *           (function "LL_ADC_REG_SetSequencerRanks()" available):
+  *           sequencer length and each rank affectation to a channel
+  *           are configurable.
+  *           This function performs configuration of:
+  *           - Sequence length: Number of ranks in the scan sequence.
+  *           - Sequence direction: Unless specified in parameters, sequencer
+  *             scan direction is forward (from rank 1 to rank n).
+  *           Sequencer ranks are selected using
+  *           function "LL_ADC_REG_SetSequencerRanks()".
+  *         - For devices with sequencer not fully configurable
+  *           (function "LL_ADC_REG_SetSequencerChannels()" available):
+  *           sequencer length and each rank affectation to a channel
+  *           are defined by channel number.
+  *           This function performs configuration of:
+  *           - Sequence length: Number of ranks in the scan sequence is
+  *             defined by number of channels set in the sequence,
+  *             rank of each channel is fixed by channel HW number.
+  *             (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...).
+  *           - Sequence direction: Unless specified in parameters, sequencer
+  *             scan direction is forward (from lowest channel number to
+  *             highest channel number).
+  *           Sequencer ranks are selected using
+  *           function "LL_ADC_REG_SetSequencerChannels()".
+  * @note   On this STM32 series, group regular sequencer configuration
+  *         is conditioned to ADC instance sequencer mode.
+  *         If ADC instance sequencer mode is disabled, sequencers of
+  *         all groups (group regular, group injected) can be configured
+  *         but their execution is disabled (limited to rank 1).
+  *         Refer to function @ref LL_ADC_SetSequencersScanMode().
+  * @note   Sequencer disabled is equivalent to sequencer of 1 rank:
+  *         ADC conversion on only 1 channel.
+  * @rmtoll SQR1     L              LL_ADC_REG_SetSequencerLength
+  * @param  ADCx ADC instance
+  * @param  SequencerNbRanks This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_REG_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t SequencerNbRanks)
+{
+  MODIFY_REG(ADCx->SQR1, ADC_SQR1_L, SequencerNbRanks);
+}
+
+/**
+  * @brief  Get ADC group regular sequencer length and scan direction.
+  * @note   Description of ADC group regular sequencer features:
+  *         - For devices with sequencer fully configurable
+  *           (function "LL_ADC_REG_SetSequencerRanks()" available):
+  *           sequencer length and each rank affectation to a channel
+  *           are configurable.
+  *           This function retrieves:
+  *           - Sequence length: Number of ranks in the scan sequence.
+  *           - Sequence direction: Unless specified in parameters, sequencer
+  *             scan direction is forward (from rank 1 to rank n).
+  *           Sequencer ranks are selected using
+  *           function "LL_ADC_REG_SetSequencerRanks()".
+  *         - For devices with sequencer not fully configurable
+  *           (function "LL_ADC_REG_SetSequencerChannels()" available):
+  *           sequencer length and each rank affectation to a channel
+  *           are defined by channel number.
+  *           This function retrieves:
+  *           - Sequence length: Number of ranks in the scan sequence is
+  *             defined by number of channels set in the sequence,
+  *             rank of each channel is fixed by channel HW number.
+  *             (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...).
+  *           - Sequence direction: Unless specified in parameters, sequencer
+  *             scan direction is forward (from lowest channel number to
+  *             highest channel number).
+  *           Sequencer ranks are selected using
+  *           function "LL_ADC_REG_SetSequencerChannels()".
+  * @note   On this STM32 series, group regular sequencer configuration
+  *         is conditioned to ADC instance sequencer mode.
+  *         If ADC instance sequencer mode is disabled, sequencers of
+  *         all groups (group regular, group injected) can be configured
+  *         but their execution is disabled (limited to rank 1).
+  *         Refer to function @ref LL_ADC_SetSequencersScanMode().
+  * @note   Sequencer disabled is equivalent to sequencer of 1 rank:
+  *         ADC conversion on only 1 channel.
+  * @rmtoll SQR1     L              LL_ADC_REG_SetSequencerLength
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS
+  */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerLength(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->SQR1, ADC_SQR1_L));
+}
+
+/**
+  * @brief  Set ADC group regular sequencer discontinuous mode:
+  *         sequence subdivided and scan conversions interrupted every selected
+  *         number of ranks.
+  * @note   It is not possible to enable both ADC group regular 
+  *         continuous mode and sequencer discontinuous mode.
+  * @note   It is not possible to enable both ADC auto-injected mode
+  *         and ADC group regular sequencer discontinuous mode.
+  * @rmtoll CR1      DISCEN         LL_ADC_REG_SetSequencerDiscont\n
+  *         CR1      DISCNUM        LL_ADC_REG_SetSequencerDiscont
+  * @param  ADCx ADC instance
+  * @param  SeqDiscont This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_2RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_3RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_4RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_5RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_6RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_7RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_8RANKS
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_REG_SetSequencerDiscont(ADC_TypeDef *ADCx, uint32_t SeqDiscont)
+{
+  MODIFY_REG(ADCx->CR1, ADC_CR1_DISCEN | ADC_CR1_DISCNUM, SeqDiscont);
+}
+
+/**
+  * @brief  Get ADC group regular sequencer discontinuous mode:
+  *         sequence subdivided and scan conversions interrupted every selected
+  *         number of ranks.
+  * @rmtoll CR1      DISCEN         LL_ADC_REG_GetSequencerDiscont\n
+  *         CR1      DISCNUM        LL_ADC_REG_GetSequencerDiscont
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_2RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_3RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_4RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_5RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_6RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_7RANKS
+  *         @arg @ref LL_ADC_REG_SEQ_DISCONT_8RANKS
+  */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->CR1, ADC_CR1_DISCEN | ADC_CR1_DISCNUM));
+}
+
+/**
+  * @brief  Set ADC group regular sequence: channel on the selected
+  *         scan sequence rank.
+  * @note   This function performs configuration of:
+  *         - Channels ordering into each rank of scan sequence:
+  *           whatever channel can be placed into whatever rank.
+  * @note   On this STM32 series, ADC group regular sequencer is
+  *         fully configurable: sequencer length and each rank
+  *         affectation to a channel are configurable.
+  *         Refer to description of function @ref LL_ADC_REG_SetSequencerLength().
+  * @note   Depending on devices and packages, some channels may not be available.
+  *         Refer to device datasheet for channels availability.
+  * @note   On this STM32 series, to measure internal channels (VrefInt,
+  *         TempSensor, ...), measurement paths to internal channels must be
+  *         enabled separately.
+  *         This can be done using function @ref LL_ADC_SetCommonPathInternalCh().
+  * @rmtoll SQR3     SQ1            LL_ADC_REG_SetSequencerRanks\n
+  *         SQR3     SQ2            LL_ADC_REG_SetSequencerRanks\n
+  *         SQR3     SQ3            LL_ADC_REG_SetSequencerRanks\n
+  *         SQR3     SQ4            LL_ADC_REG_SetSequencerRanks\n
+  *         SQR3     SQ5            LL_ADC_REG_SetSequencerRanks\n
+  *         SQR3     SQ6            LL_ADC_REG_SetSequencerRanks\n
+  *         SQR2     SQ7            LL_ADC_REG_SetSequencerRanks\n
+  *         SQR2     SQ8            LL_ADC_REG_SetSequencerRanks\n
+  *         SQR2     SQ9            LL_ADC_REG_SetSequencerRanks\n
+  *         SQR2     SQ10           LL_ADC_REG_SetSequencerRanks\n
+  *         SQR2     SQ11           LL_ADC_REG_SetSequencerRanks\n
+  *         SQR2     SQ12           LL_ADC_REG_SetSequencerRanks\n
+  *         SQR1     SQ13           LL_ADC_REG_SetSequencerRanks\n
+  *         SQR1     SQ14           LL_ADC_REG_SetSequencerRanks\n
+  *         SQR1     SQ15           LL_ADC_REG_SetSequencerRanks\n
+  *         SQR1     SQ16           LL_ADC_REG_SetSequencerRanks
+  * @param  ADCx ADC instance
+  * @param  Rank This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_REG_RANK_1
+  *         @arg @ref LL_ADC_REG_RANK_2
+  *         @arg @ref LL_ADC_REG_RANK_3
+  *         @arg @ref LL_ADC_REG_RANK_4
+  *         @arg @ref LL_ADC_REG_RANK_5
+  *         @arg @ref LL_ADC_REG_RANK_6
+  *         @arg @ref LL_ADC_REG_RANK_7
+  *         @arg @ref LL_ADC_REG_RANK_8
+  *         @arg @ref LL_ADC_REG_RANK_9
+  *         @arg @ref LL_ADC_REG_RANK_10
+  *         @arg @ref LL_ADC_REG_RANK_11
+  *         @arg @ref LL_ADC_REG_RANK_12
+  *         @arg @ref LL_ADC_REG_RANK_13
+  *         @arg @ref LL_ADC_REG_RANK_14
+  *         @arg @ref LL_ADC_REG_RANK_15
+  *         @arg @ref LL_ADC_REG_RANK_16
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_CHANNEL_0
+  *         @arg @ref LL_ADC_CHANNEL_1
+  *         @arg @ref LL_ADC_CHANNEL_2
+  *         @arg @ref LL_ADC_CHANNEL_3
+  *         @arg @ref LL_ADC_CHANNEL_4
+  *         @arg @ref LL_ADC_CHANNEL_5
+  *         @arg @ref LL_ADC_CHANNEL_6
+  *         @arg @ref LL_ADC_CHANNEL_7
+  *         @arg @ref LL_ADC_CHANNEL_8
+  *         @arg @ref LL_ADC_CHANNEL_9
+  *         @arg @ref LL_ADC_CHANNEL_10
+  *         @arg @ref LL_ADC_CHANNEL_11
+  *         @arg @ref LL_ADC_CHANNEL_12
+  *         @arg @ref LL_ADC_CHANNEL_13
+  *         @arg @ref LL_ADC_CHANNEL_14
+  *         @arg @ref LL_ADC_CHANNEL_15
+  *         @arg @ref LL_ADC_CHANNEL_16
+  *         @arg @ref LL_ADC_CHANNEL_17
+  *         @arg @ref LL_ADC_CHANNEL_18
+  *         @arg @ref LL_ADC_CHANNEL_VREFINT      (1)
+  *         @arg @ref LL_ADC_CHANNEL_TEMPSENSOR   (1)(2)
+  *         @arg @ref LL_ADC_CHANNEL_VBAT         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.\n
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel)
+{
+  /* Set bits with content of parameter "Channel" with bits position          */
+  /* in register and register position depending on parameter "Rank".         */
+  /* Parameters "Rank" and "Channel" are used with masks because containing   */
+  /* other bits reserved for other purpose.                                   */
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SQR1, __ADC_MASK_SHIFT(Rank, ADC_REG_SQRX_REGOFFSET_MASK));
+  
+  MODIFY_REG(*preg,
+             ADC_CHANNEL_ID_NUMBER_MASK << (Rank & ADC_REG_RANK_ID_SQRX_MASK),
+             (Channel & ADC_CHANNEL_ID_NUMBER_MASK) << (Rank & ADC_REG_RANK_ID_SQRX_MASK));
+}
+
+/**
+  * @brief  Get ADC group regular sequence: channel on the selected
+  *         scan sequence rank.
+  * @note   On this STM32 series, ADC group regular sequencer is
+  *         fully configurable: sequencer length and each rank
+  *         affectation to a channel are configurable.
+  *         Refer to description of function @ref LL_ADC_REG_SetSequencerLength().
+  * @note   Depending on devices and packages, some channels may not be available.
+  *         Refer to device datasheet for channels availability.
+  * @note   Usage of the returned channel number:
+  *         - To reinject this channel into another function LL_ADC_xxx:
+  *           the returned channel number is only partly formatted on definition
+  *           of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared
+  *           with parts of literals LL_ADC_CHANNEL_x or using
+  *           helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB().
+  *           Then the selected literal LL_ADC_CHANNEL_x can be used
+  *           as parameter for another function.
+  *         - To get the channel number in decimal format:
+  *           process the returned value with the helper macro
+  *           @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB().
+  * @rmtoll SQR3     SQ1            LL_ADC_REG_GetSequencerRanks\n
+  *         SQR3     SQ2            LL_ADC_REG_GetSequencerRanks\n
+  *         SQR3     SQ3            LL_ADC_REG_GetSequencerRanks\n
+  *         SQR3     SQ4            LL_ADC_REG_GetSequencerRanks\n
+  *         SQR3     SQ5            LL_ADC_REG_GetSequencerRanks\n
+  *         SQR3     SQ6            LL_ADC_REG_GetSequencerRanks\n
+  *         SQR2     SQ7            LL_ADC_REG_GetSequencerRanks\n
+  *         SQR2     SQ8            LL_ADC_REG_GetSequencerRanks\n
+  *         SQR2     SQ9            LL_ADC_REG_GetSequencerRanks\n
+  *         SQR2     SQ10           LL_ADC_REG_GetSequencerRanks\n
+  *         SQR2     SQ11           LL_ADC_REG_GetSequencerRanks\n
+  *         SQR2     SQ12           LL_ADC_REG_GetSequencerRanks\n
+  *         SQR1     SQ13           LL_ADC_REG_GetSequencerRanks\n
+  *         SQR1     SQ14           LL_ADC_REG_GetSequencerRanks\n
+  *         SQR1     SQ15           LL_ADC_REG_GetSequencerRanks\n
+  *         SQR1     SQ16           LL_ADC_REG_GetSequencerRanks
+  * @param  ADCx ADC instance
+  * @param  Rank This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_REG_RANK_1
+  *         @arg @ref LL_ADC_REG_RANK_2
+  *         @arg @ref LL_ADC_REG_RANK_3
+  *         @arg @ref LL_ADC_REG_RANK_4
+  *         @arg @ref LL_ADC_REG_RANK_5
+  *         @arg @ref LL_ADC_REG_RANK_6
+  *         @arg @ref LL_ADC_REG_RANK_7
+  *         @arg @ref LL_ADC_REG_RANK_8
+  *         @arg @ref LL_ADC_REG_RANK_9
+  *         @arg @ref LL_ADC_REG_RANK_10
+  *         @arg @ref LL_ADC_REG_RANK_11
+  *         @arg @ref LL_ADC_REG_RANK_12
+  *         @arg @ref LL_ADC_REG_RANK_13
+  *         @arg @ref LL_ADC_REG_RANK_14
+  *         @arg @ref LL_ADC_REG_RANK_15
+  *         @arg @ref LL_ADC_REG_RANK_16
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_CHANNEL_0
+  *         @arg @ref LL_ADC_CHANNEL_1
+  *         @arg @ref LL_ADC_CHANNEL_2
+  *         @arg @ref LL_ADC_CHANNEL_3
+  *         @arg @ref LL_ADC_CHANNEL_4
+  *         @arg @ref LL_ADC_CHANNEL_5
+  *         @arg @ref LL_ADC_CHANNEL_6
+  *         @arg @ref LL_ADC_CHANNEL_7
+  *         @arg @ref LL_ADC_CHANNEL_8
+  *         @arg @ref LL_ADC_CHANNEL_9
+  *         @arg @ref LL_ADC_CHANNEL_10
+  *         @arg @ref LL_ADC_CHANNEL_11
+  *         @arg @ref LL_ADC_CHANNEL_12
+  *         @arg @ref LL_ADC_CHANNEL_13
+  *         @arg @ref LL_ADC_CHANNEL_14
+  *         @arg @ref LL_ADC_CHANNEL_15
+  *         @arg @ref LL_ADC_CHANNEL_16
+  *         @arg @ref LL_ADC_CHANNEL_17
+  *         @arg @ref LL_ADC_CHANNEL_18
+  *         @arg @ref LL_ADC_CHANNEL_VREFINT      (1)
+  *         @arg @ref LL_ADC_CHANNEL_TEMPSENSOR   (1)(2)
+  *         @arg @ref LL_ADC_CHANNEL_VBAT         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.\n
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.\n
+  *         (1) For ADC channel read back from ADC register,
+  *             comparison with internal channel parameter to be done
+  *             using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL().
+  */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank)
+{
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SQR1, __ADC_MASK_SHIFT(Rank, ADC_REG_SQRX_REGOFFSET_MASK));
+  
+  return (uint32_t) (READ_BIT(*preg,
+                              ADC_CHANNEL_ID_NUMBER_MASK << (Rank & ADC_REG_RANK_ID_SQRX_MASK))
+                     >> (Rank & ADC_REG_RANK_ID_SQRX_MASK)
+                    );
+}
+
+/**
+  * @brief  Set ADC continuous conversion mode on ADC group regular.
+  * @note   Description of ADC continuous conversion mode:
+  *         - single mode: one conversion per trigger
+  *         - continuous mode: after the first trigger, following
+  *           conversions launched successively automatically.
+  * @note   It is not possible to enable both ADC group regular 
+  *         continuous mode and sequencer discontinuous mode.
+  * @rmtoll CR2      CONT           LL_ADC_REG_SetContinuousMode
+  * @param  ADCx ADC instance
+  * @param  Continuous This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_REG_CONV_SINGLE
+  *         @arg @ref LL_ADC_REG_CONV_CONTINUOUS
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_REG_SetContinuousMode(ADC_TypeDef *ADCx, uint32_t Continuous)
+{
+  MODIFY_REG(ADCx->CR2, ADC_CR2_CONT, Continuous);
+}
+
+/**
+  * @brief  Get ADC continuous conversion mode on ADC group regular.
+  * @note   Description of ADC continuous conversion mode:
+  *         - single mode: one conversion per trigger
+  *         - continuous mode: after the first trigger, following
+  *           conversions launched successively automatically.
+  * @rmtoll CR2      CONT           LL_ADC_REG_GetContinuousMode
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_REG_CONV_SINGLE
+  *         @arg @ref LL_ADC_REG_CONV_CONTINUOUS
+  */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetContinuousMode(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_CONT));
+}
+
+/**
+  * @brief  Set ADC group regular conversion data transfer: no transfer or
+  *         transfer by DMA, and DMA requests mode.
+  * @note   If transfer by DMA selected, specifies the DMA requests
+  *         mode:
+  *         - Limited mode (One shot mode): DMA transfer requests are stopped
+  *           when number of DMA data transfers (number of
+  *           ADC conversions) is reached.
+  *           This ADC mode is intended to be used with DMA mode non-circular.
+  *         - Unlimited mode: DMA transfer requests are unlimited,
+  *           whatever number of DMA data transfers (number of
+  *           ADC conversions).
+  *           This ADC mode is intended to be used with DMA mode circular.
+  * @note   If ADC DMA requests mode is set to unlimited and DMA is set to
+  *         mode non-circular:
+  *         when DMA transfers size will be reached, DMA will stop transfers of
+  *         ADC conversions data ADC will raise an overrun error
+  *        (overrun flag and interruption if enabled).
+  * @note   For devices with several ADC instances: ADC multimode DMA
+  *         settings are available using function @ref LL_ADC_SetMultiDMATransfer().
+  * @note   To configure DMA source address (peripheral address),
+  *         use function @ref LL_ADC_DMA_GetRegAddr().
+  * @rmtoll CR2      DMA            LL_ADC_REG_SetDMATransfer\n
+  *         CR2      DDS            LL_ADC_REG_SetDMATransfer
+  * @param  ADCx ADC instance
+  * @param  DMATransfer This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE
+  *         @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED
+  *         @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_REG_SetDMATransfer(ADC_TypeDef *ADCx, uint32_t DMATransfer)
+{
+  MODIFY_REG(ADCx->CR2, ADC_CR2_DMA | ADC_CR2_DDS, DMATransfer);
+}
+
+/**
+  * @brief  Get ADC group regular conversion data transfer: no transfer or
+  *         transfer by DMA, and DMA requests mode.
+  * @note   If transfer by DMA selected, specifies the DMA requests
+  *         mode:
+  *         - Limited mode (One shot mode): DMA transfer requests are stopped
+  *           when number of DMA data transfers (number of
+  *           ADC conversions) is reached.
+  *           This ADC mode is intended to be used with DMA mode non-circular.
+  *         - Unlimited mode: DMA transfer requests are unlimited,
+  *           whatever number of DMA data transfers (number of
+  *           ADC conversions).
+  *           This ADC mode is intended to be used with DMA mode circular.
+  * @note   If ADC DMA requests mode is set to unlimited and DMA is set to
+  *         mode non-circular:
+  *         when DMA transfers size will be reached, DMA will stop transfers of
+  *         ADC conversions data ADC will raise an overrun error
+  *         (overrun flag and interruption if enabled).
+  * @note   For devices with several ADC instances: ADC multimode DMA
+  *         settings are available using function @ref LL_ADC_GetMultiDMATransfer().
+  * @note   To configure DMA source address (peripheral address),
+  *         use function @ref LL_ADC_DMA_GetRegAddr().
+  * @rmtoll CR2      DMA            LL_ADC_REG_GetDMATransfer\n
+  *         CR2      DDS            LL_ADC_REG_GetDMATransfer
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE
+  *         @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED
+  *         @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED
+  */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetDMATransfer(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_DMA | ADC_CR2_DDS));
+}
+
+/**
+  * @brief  Specify which ADC flag between EOC (end of unitary conversion)
+  *         or EOS (end of sequence conversions) is used to indicate
+  *         the end of conversion.
+  * @note   This feature is aimed to be set when using ADC with
+  *         programming model by polling or interruption
+  *         (programming model by DMA usually uses DMA interruptions
+  *         to indicate end of conversion and data transfer).
+  * @note   For ADC group injected, end of conversion (flag&IT) is raised
+  *         only at the end of the sequence.
+  * @rmtoll CR2      EOCS           LL_ADC_REG_SetFlagEndOfConversion
+  * @param  ADCx ADC instance
+  * @param  EocSelection This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV
+  *         @arg @ref LL_ADC_REG_FLAG_EOC_UNITARY_CONV
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_REG_SetFlagEndOfConversion(ADC_TypeDef *ADCx, uint32_t EocSelection)
+{
+  MODIFY_REG(ADCx->CR2, ADC_CR2_EOCS, EocSelection);
+}
+
+/**
+  * @brief  Get which ADC flag between EOC (end of unitary conversion)
+  *         or EOS (end of sequence conversions) is used to indicate
+  *         the end of conversion.
+  * @rmtoll CR2      EOCS           LL_ADC_REG_GetFlagEndOfConversion
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV
+  *         @arg @ref LL_ADC_REG_FLAG_EOC_UNITARY_CONV
+  */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetFlagEndOfConversion(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_EOCS));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EF_Configuration_ADC_Group_Injected Configuration of ADC hierarchical scope: group injected
+  * @{
+  */
+
+/**
+  * @brief  Set ADC group injected conversion trigger source:
+  *         internal (SW start) or from external IP (timer event,
+  *         external interrupt line).
+  * @note   On this STM32 series, setting of external trigger edge is performed
+  *         using function @ref LL_ADC_INJ_StartConversionExtTrig().
+  * @note   Availability of parameters of trigger sources from timer 
+  *         depends on timers availability on the selected device.
+  * @rmtoll CR2      JEXTSEL        LL_ADC_INJ_SetTriggerSource\n
+  *         CR2      JEXTEN         LL_ADC_INJ_SetTriggerSource
+  * @param  ADCx ADC instance
+  * @param  TriggerSource This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_TRIG_SOFTWARE
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_CH4
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_TRGO
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_CH1
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_TRGO
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH2
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH4
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH1
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH2
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH3
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_TRGO
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM5_CH4
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM5_TRGO
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH2
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH3
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH4
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_EXTI_LINE15
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_INJ_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource)
+{
+/* Note: On this STM32 series, ADC group injected external trigger edge       */
+/*       is used to perform a ADC conversion start.                           */
+/*       This function does not set external trigger edge.                    */
+/*       This feature is set using function                                   */
+/*       @ref LL_ADC_INJ_StartConversionExtTrig().                            */
+  MODIFY_REG(ADCx->CR2, ADC_CR2_JEXTSEL, (TriggerSource & ADC_CR2_JEXTSEL));
+}
+
+/**
+  * @brief  Get ADC group injected conversion trigger source:
+  *         internal (SW start) or from external IP (timer event,
+  *         external interrupt line).
+  * @note   To determine whether group injected trigger source is
+  *         internal (SW start) or external, without detail
+  *         of which peripheral is selected as external trigger,
+  *         (equivalent to 
+  *         "if(LL_ADC_INJ_GetTriggerSource(ADC1) == LL_ADC_INJ_TRIG_SOFTWARE)")
+  *         use function @ref LL_ADC_INJ_IsTriggerSourceSWStart.
+  * @note   Availability of parameters of trigger sources from timer 
+  *         depends on timers availability on the selected device.
+  * @rmtoll CR2      JEXTSEL        LL_ADC_INJ_GetTriggerSource\n
+  *         CR2      JEXTEN         LL_ADC_INJ_GetTriggerSource
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_TRIG_SOFTWARE
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_CH4
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_TRGO
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_CH1
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_TRGO
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH2
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH4
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH1
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH2
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH3
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_TRGO
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM5_CH4
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM5_TRGO
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH2
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH3
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_TIM8_CH4
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_EXTI_LINE15
+  */
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerSource(ADC_TypeDef *ADCx)
+{
+  uint32_t TriggerSource = READ_BIT(ADCx->CR2, ADC_CR2_JEXTSEL | ADC_CR2_JEXTEN);
+  
+  /* Value for shift of {0; 4; 8; 12} depending on value of bitfield          */
+  /* corresponding to ADC_CR2_JEXTEN {0; 1; 2; 3}.                            */
+  uint32_t ShiftExten = ((TriggerSource & ADC_CR2_JEXTEN) >> (ADC_INJ_TRIG_EXTEN_BITOFFSET_POS - 2UL));
+  
+  /* Set bitfield corresponding to ADC_CR2_JEXTEN and ADC_CR2_JEXTSEL         */
+  /* to match with triggers literals definition.                              */
+  return ((TriggerSource
+           & (ADC_INJ_TRIG_SOURCE_MASK << ShiftExten) & ADC_CR2_JEXTSEL)
+          | ((ADC_INJ_TRIG_EDGE_MASK << ShiftExten) & ADC_CR2_JEXTEN)
+         );
+}
+
+/**
+  * @brief  Get ADC group injected conversion trigger source internal (SW start)
+            or external
+  * @note   In case of group injected trigger source set to external trigger,
+  *         to determine which peripheral is selected as external trigger,
+  *         use function @ref LL_ADC_INJ_GetTriggerSource.
+  * @rmtoll CR2      JEXTEN         LL_ADC_INJ_IsTriggerSourceSWStart
+  * @param  ADCx ADC instance
+  * @retval Value "0" if trigger source external trigger
+  *         Value "1" if trigger source SW start.
+  */
+__STATIC_INLINE uint32_t LL_ADC_INJ_IsTriggerSourceSWStart(ADC_TypeDef *ADCx)
+{
+  return (READ_BIT(ADCx->CR2, ADC_CR2_JEXTEN) == (LL_ADC_INJ_TRIG_SOFTWARE & ADC_CR2_JEXTEN));
+}
+
+/**
+  * @brief  Get ADC group injected conversion trigger polarity.
+  *         Applicable only for trigger source set to external trigger.
+  * @rmtoll CR2      JEXTEN         LL_ADC_INJ_GetTriggerEdge
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_RISING
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_FALLING
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_RISINGFALLING
+  */
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerEdge(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_JEXTEN));
+}
+
+/**
+  * @brief  Set ADC group injected sequencer length and scan direction.
+  * @note   This function performs configuration of:
+  *         - Sequence length: Number of ranks in the scan sequence.
+  *         - Sequence direction: Unless specified in parameters, sequencer
+  *           scan direction is forward (from rank 1 to rank n).
+  * @note   On this STM32 series, group injected sequencer configuration
+  *         is conditioned to ADC instance sequencer mode.
+  *         If ADC instance sequencer mode is disabled, sequencers of
+  *         all groups (group regular, group injected) can be configured
+  *         but their execution is disabled (limited to rank 1).
+  *         Refer to function @ref LL_ADC_SetSequencersScanMode().
+  * @note   Sequencer disabled is equivalent to sequencer of 1 rank:
+  *         ADC conversion on only 1 channel.
+  * @rmtoll JSQR     JL             LL_ADC_INJ_SetSequencerLength
+  * @param  ADCx ADC instance
+  * @param  SequencerNbRanks This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_SEQ_SCAN_DISABLE
+  *         @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS
+  *         @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS
+  *         @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_INJ_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t SequencerNbRanks)
+{
+  MODIFY_REG(ADCx->JSQR, ADC_JSQR_JL, SequencerNbRanks);
+}
+
+/**
+  * @brief  Get ADC group injected sequencer length and scan direction.
+  * @note   This function retrieves:
+  *         - Sequence length: Number of ranks in the scan sequence.
+  *         - Sequence direction: Unless specified in parameters, sequencer
+  *           scan direction is forward (from rank 1 to rank n).
+  * @note   On this STM32 series, group injected sequencer configuration
+  *         is conditioned to ADC instance sequencer mode.
+  *         If ADC instance sequencer mode is disabled, sequencers of
+  *         all groups (group regular, group injected) can be configured
+  *         but their execution is disabled (limited to rank 1).
+  *         Refer to function @ref LL_ADC_SetSequencersScanMode().
+  * @note   Sequencer disabled is equivalent to sequencer of 1 rank:
+  *         ADC conversion on only 1 channel.
+  * @rmtoll JSQR     JL             LL_ADC_INJ_GetSequencerLength
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_SEQ_SCAN_DISABLE
+  *         @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS
+  *         @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS
+  *         @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS
+  */
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerLength(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->JSQR, ADC_JSQR_JL));
+}
+
+/**
+  * @brief  Set ADC group injected sequencer discontinuous mode:
+  *         sequence subdivided and scan conversions interrupted every selected
+  *         number of ranks.
+  * @note   It is not possible to enable both ADC group injected
+  *         auto-injected mode and sequencer discontinuous mode.
+  * @rmtoll CR1      DISCEN         LL_ADC_INJ_SetSequencerDiscont
+  * @param  ADCx ADC instance
+  * @param  SeqDiscont This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_SEQ_DISCONT_DISABLE
+  *         @arg @ref LL_ADC_INJ_SEQ_DISCONT_1RANK
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_INJ_SetSequencerDiscont(ADC_TypeDef *ADCx, uint32_t SeqDiscont)
+{
+  MODIFY_REG(ADCx->CR1, ADC_CR1_JDISCEN, SeqDiscont);
+}
+
+/**
+  * @brief  Get ADC group injected sequencer discontinuous mode:
+  *         sequence subdivided and scan conversions interrupted every selected
+  *         number of ranks.
+  * @rmtoll CR1      DISCEN         LL_ADC_REG_GetSequencerDiscont
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_SEQ_DISCONT_DISABLE
+  *         @arg @ref LL_ADC_INJ_SEQ_DISCONT_1RANK
+  */
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerDiscont(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->CR1, ADC_CR1_JDISCEN));
+}
+
+/**
+  * @brief  Set ADC group injected sequence: channel on the selected
+  *         sequence rank.
+  * @note   Depending on devices and packages, some channels may not be available.
+  *         Refer to device datasheet for channels availability.
+  * @note   On this STM32 series, to measure internal channels (VrefInt,
+  *         TempSensor, ...), measurement paths to internal channels must be
+  *         enabled separately.
+  *         This can be done using function @ref LL_ADC_SetCommonPathInternalCh().
+  * @rmtoll JSQR     JSQ1           LL_ADC_INJ_SetSequencerRanks\n
+  *         JSQR     JSQ2           LL_ADC_INJ_SetSequencerRanks\n
+  *         JSQR     JSQ3           LL_ADC_INJ_SetSequencerRanks\n
+  *         JSQR     JSQ4           LL_ADC_INJ_SetSequencerRanks
+  * @param  ADCx ADC instance
+  * @param  Rank This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_RANK_1
+  *         @arg @ref LL_ADC_INJ_RANK_2
+  *         @arg @ref LL_ADC_INJ_RANK_3
+  *         @arg @ref LL_ADC_INJ_RANK_4
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_CHANNEL_0
+  *         @arg @ref LL_ADC_CHANNEL_1
+  *         @arg @ref LL_ADC_CHANNEL_2
+  *         @arg @ref LL_ADC_CHANNEL_3
+  *         @arg @ref LL_ADC_CHANNEL_4
+  *         @arg @ref LL_ADC_CHANNEL_5
+  *         @arg @ref LL_ADC_CHANNEL_6
+  *         @arg @ref LL_ADC_CHANNEL_7
+  *         @arg @ref LL_ADC_CHANNEL_8
+  *         @arg @ref LL_ADC_CHANNEL_9
+  *         @arg @ref LL_ADC_CHANNEL_10
+  *         @arg @ref LL_ADC_CHANNEL_11
+  *         @arg @ref LL_ADC_CHANNEL_12
+  *         @arg @ref LL_ADC_CHANNEL_13
+  *         @arg @ref LL_ADC_CHANNEL_14
+  *         @arg @ref LL_ADC_CHANNEL_15
+  *         @arg @ref LL_ADC_CHANNEL_16
+  *         @arg @ref LL_ADC_CHANNEL_17
+  *         @arg @ref LL_ADC_CHANNEL_18
+  *         @arg @ref LL_ADC_CHANNEL_VREFINT      (1)
+  *         @arg @ref LL_ADC_CHANNEL_TEMPSENSOR   (1)(2)
+  *         @arg @ref LL_ADC_CHANNEL_VBAT         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.\n
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_INJ_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel)
+{
+  /* Set bits with content of parameter "Channel" with bits position          */
+  /* in register depending on parameter "Rank".                               */
+  /* Parameters "Rank" and "Channel" are used with masks because containing   */
+  /* other bits reserved for other purpose.                                   */
+  uint32_t tmpreg1 = (READ_BIT(ADCx->JSQR, ADC_JSQR_JL) >> ADC_JSQR_JL_Pos) + 1UL;
+  
+  MODIFY_REG(ADCx->JSQR,
+             ADC_CHANNEL_ID_NUMBER_MASK << (5UL * (uint8_t)(((Rank) + 3UL) - (tmpreg1))),
+             (Channel & ADC_CHANNEL_ID_NUMBER_MASK) << (5UL * (uint8_t)(((Rank) + 3UL) - (tmpreg1))));
+}
+
+/**
+  * @brief  Get ADC group injected sequence: channel on the selected
+  *         sequence rank.
+  * @note   Depending on devices and packages, some channels may not be available.
+  *         Refer to device datasheet for channels availability.
+  * @note   Usage of the returned channel number:
+  *         - To reinject this channel into another function LL_ADC_xxx:
+  *           the returned channel number is only partly formatted on definition
+  *           of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared
+  *           with parts of literals LL_ADC_CHANNEL_x or using
+  *           helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB().
+  *           Then the selected literal LL_ADC_CHANNEL_x can be used
+  *           as parameter for another function.
+  *         - To get the channel number in decimal format:
+  *           process the returned value with the helper macro
+  *           @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB().
+  * @rmtoll JSQR     JSQ1           LL_ADC_INJ_SetSequencerRanks\n
+  *         JSQR     JSQ2           LL_ADC_INJ_SetSequencerRanks\n
+  *         JSQR     JSQ3           LL_ADC_INJ_SetSequencerRanks\n
+  *         JSQR     JSQ4           LL_ADC_INJ_SetSequencerRanks
+  * @param  ADCx ADC instance
+  * @param  Rank This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_RANK_1
+  *         @arg @ref LL_ADC_INJ_RANK_2
+  *         @arg @ref LL_ADC_INJ_RANK_3
+  *         @arg @ref LL_ADC_INJ_RANK_4
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_CHANNEL_0
+  *         @arg @ref LL_ADC_CHANNEL_1
+  *         @arg @ref LL_ADC_CHANNEL_2
+  *         @arg @ref LL_ADC_CHANNEL_3
+  *         @arg @ref LL_ADC_CHANNEL_4
+  *         @arg @ref LL_ADC_CHANNEL_5
+  *         @arg @ref LL_ADC_CHANNEL_6
+  *         @arg @ref LL_ADC_CHANNEL_7
+  *         @arg @ref LL_ADC_CHANNEL_8
+  *         @arg @ref LL_ADC_CHANNEL_9
+  *         @arg @ref LL_ADC_CHANNEL_10
+  *         @arg @ref LL_ADC_CHANNEL_11
+  *         @arg @ref LL_ADC_CHANNEL_12
+  *         @arg @ref LL_ADC_CHANNEL_13
+  *         @arg @ref LL_ADC_CHANNEL_14
+  *         @arg @ref LL_ADC_CHANNEL_15
+  *         @arg @ref LL_ADC_CHANNEL_16
+  *         @arg @ref LL_ADC_CHANNEL_17
+  *         @arg @ref LL_ADC_CHANNEL_18
+  *         @arg @ref LL_ADC_CHANNEL_VREFINT      (1)
+  *         @arg @ref LL_ADC_CHANNEL_TEMPSENSOR   (1)(2)
+  *         @arg @ref LL_ADC_CHANNEL_VBAT         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.\n
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.\n
+  *         (1) For ADC channel read back from ADC register,
+  *             comparison with internal channel parameter to be done
+  *             using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL().
+  */
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank)
+{
+  uint32_t tmpreg1 = (READ_BIT(ADCx->JSQR, ADC_JSQR_JL) >> ADC_JSQR_JL_Pos)  + 1UL;
+  
+  return (uint32_t)(READ_BIT(ADCx->JSQR,
+                             ADC_CHANNEL_ID_NUMBER_MASK << (5UL * (uint8_t)(((Rank) + 3UL) - (tmpreg1))))
+                    >> (5UL * (uint8_t)(((Rank) + 3UL) - (tmpreg1)))
+                   );
+}
+
+/**
+  * @brief  Set ADC group injected conversion trigger:
+  *         independent or from ADC group regular.
+  * @note   This mode can be used to extend number of data registers
+  *         updated after one ADC conversion trigger and with data 
+  *         permanently kept (not erased by successive conversions of scan of
+  *         ADC sequencer ranks), up to 5 data registers:
+  *         1 data register on ADC group regular, 4 data registers
+  *         on ADC group injected.            
+  * @note   If ADC group injected injected trigger source is set to an
+  *         external trigger, this feature must be must be set to
+  *         independent trigger.
+  *         ADC group injected automatic trigger is compliant only with 
+  *         group injected trigger source set to SW start, without any 
+  *         further action on  ADC group injected conversion start or stop: 
+  *         in this case, ADC group injected is controlled only 
+  *         from ADC group regular.
+  * @note   It is not possible to enable both ADC group injected
+  *         auto-injected mode and sequencer discontinuous mode.
+  * @rmtoll CR1      JAUTO          LL_ADC_INJ_SetTrigAuto
+  * @param  ADCx ADC instance
+  * @param  TrigAuto This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_TRIG_INDEPENDENT
+  *         @arg @ref LL_ADC_INJ_TRIG_FROM_GRP_REGULAR
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_INJ_SetTrigAuto(ADC_TypeDef *ADCx, uint32_t TrigAuto)
+{
+  MODIFY_REG(ADCx->CR1, ADC_CR1_JAUTO, TrigAuto);
+}
+
+/**
+  * @brief  Get ADC group injected conversion trigger:
+  *         independent or from ADC group regular.
+  * @rmtoll CR1      JAUTO          LL_ADC_INJ_GetTrigAuto
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_TRIG_INDEPENDENT
+  *         @arg @ref LL_ADC_INJ_TRIG_FROM_GRP_REGULAR
+  */
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetTrigAuto(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->CR1, ADC_CR1_JAUTO));
+}
+
+/**
+  * @brief  Set ADC group injected offset.
+  * @note   It sets:
+  *         - ADC group injected rank to which the offset programmed
+  *           will be applied
+  *         - Offset level (offset to be subtracted from the raw
+  *           converted data).
+  *         Caution: Offset format is dependent to ADC resolution:
+  *         offset has to be left-aligned on bit 11, the LSB (right bits)
+  *         are set to 0.
+  * @note   Offset cannot be enabled or disabled.
+  *         To emulate offset disabled, set an offset value equal to 0.
+  * @rmtoll JOFR1    JOFFSET1       LL_ADC_INJ_SetOffset\n
+  *         JOFR2    JOFFSET2       LL_ADC_INJ_SetOffset\n
+  *         JOFR3    JOFFSET3       LL_ADC_INJ_SetOffset\n
+  *         JOFR4    JOFFSET4       LL_ADC_INJ_SetOffset
+  * @param  ADCx ADC instance
+  * @param  Rank This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_RANK_1
+  *         @arg @ref LL_ADC_INJ_RANK_2
+  *         @arg @ref LL_ADC_INJ_RANK_3
+  *         @arg @ref LL_ADC_INJ_RANK_4
+  * @param  OffsetLevel Value between Min_Data=0x000 and Max_Data=0xFFF
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_INJ_SetOffset(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t OffsetLevel)
+{
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JOFR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JOFRX_REGOFFSET_MASK));
+  
+  MODIFY_REG(*preg,
+             ADC_JOFR1_JOFFSET1,
+             OffsetLevel);
+}
+
+/**
+  * @brief  Get ADC group injected offset.
+  * @note   It gives offset level (offset to be subtracted from the raw converted data).
+  *         Caution: Offset format is dependent to ADC resolution:
+  *         offset has to be left-aligned on bit 11, the LSB (right bits)
+  *         are set to 0.
+  * @rmtoll JOFR1    JOFFSET1       LL_ADC_INJ_GetOffset\n
+  *         JOFR2    JOFFSET2       LL_ADC_INJ_GetOffset\n
+  *         JOFR3    JOFFSET3       LL_ADC_INJ_GetOffset\n
+  *         JOFR4    JOFFSET4       LL_ADC_INJ_GetOffset
+  * @param  ADCx ADC instance
+  * @param  Rank This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_RANK_1
+  *         @arg @ref LL_ADC_INJ_RANK_2
+  *         @arg @ref LL_ADC_INJ_RANK_3
+  *         @arg @ref LL_ADC_INJ_RANK_4
+  * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
+  */
+__STATIC_INLINE uint32_t LL_ADC_INJ_GetOffset(ADC_TypeDef *ADCx, uint32_t Rank)
+{
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JOFR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JOFRX_REGOFFSET_MASK));
+  
+  return (uint32_t)(READ_BIT(*preg,
+                             ADC_JOFR1_JOFFSET1)
+                   );
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EF_Configuration_Channels Configuration of ADC hierarchical scope: channels
+  * @{
+  */
+
+/**
+  * @brief  Set sampling time of the selected ADC channel
+  *         Unit: ADC clock cycles.
+  * @note   On this device, sampling time is on channel scope: independently
+  *         of channel mapped on ADC group regular or injected.
+  * @note   In case of internal channel (VrefInt, TempSensor, ...) to be
+  *         converted:
+  *         sampling time constraints must be respected (sampling time can be
+  *         adjusted in function of ADC clock frequency and sampling time
+  *         setting).
+  *         Refer to device datasheet for timings values (parameters TS_vrefint,
+  *         TS_temp, ...).
+  * @note   Conversion time is the addition of sampling time and processing time.
+  *         Refer to reference manual for ADC processing time of
+  *         this STM32 series.
+  * @note   In case of ADC conversion of internal channel (VrefInt,
+  *         temperature sensor, ...), a sampling time minimum value
+  *         is required.
+  *         Refer to device datasheet.
+  * @rmtoll SMPR1    SMP18          LL_ADC_SetChannelSamplingTime\n
+  *         SMPR1    SMP17          LL_ADC_SetChannelSamplingTime\n
+  *         SMPR1    SMP16          LL_ADC_SetChannelSamplingTime\n
+  *         SMPR1    SMP15          LL_ADC_SetChannelSamplingTime\n
+  *         SMPR1    SMP14          LL_ADC_SetChannelSamplingTime\n
+  *         SMPR1    SMP13          LL_ADC_SetChannelSamplingTime\n
+  *         SMPR1    SMP12          LL_ADC_SetChannelSamplingTime\n
+  *         SMPR1    SMP11          LL_ADC_SetChannelSamplingTime\n
+  *         SMPR1    SMP10          LL_ADC_SetChannelSamplingTime\n
+  *         SMPR2    SMP9           LL_ADC_SetChannelSamplingTime\n
+  *         SMPR2    SMP8           LL_ADC_SetChannelSamplingTime\n
+  *         SMPR2    SMP7           LL_ADC_SetChannelSamplingTime\n
+  *         SMPR2    SMP6           LL_ADC_SetChannelSamplingTime\n
+  *         SMPR2    SMP5           LL_ADC_SetChannelSamplingTime\n
+  *         SMPR2    SMP4           LL_ADC_SetChannelSamplingTime\n
+  *         SMPR2    SMP3           LL_ADC_SetChannelSamplingTime\n
+  *         SMPR2    SMP2           LL_ADC_SetChannelSamplingTime\n
+  *         SMPR2    SMP1           LL_ADC_SetChannelSamplingTime\n
+  *         SMPR2    SMP0           LL_ADC_SetChannelSamplingTime
+  * @param  ADCx ADC instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_CHANNEL_0
+  *         @arg @ref LL_ADC_CHANNEL_1
+  *         @arg @ref LL_ADC_CHANNEL_2
+  *         @arg @ref LL_ADC_CHANNEL_3
+  *         @arg @ref LL_ADC_CHANNEL_4
+  *         @arg @ref LL_ADC_CHANNEL_5
+  *         @arg @ref LL_ADC_CHANNEL_6
+  *         @arg @ref LL_ADC_CHANNEL_7
+  *         @arg @ref LL_ADC_CHANNEL_8
+  *         @arg @ref LL_ADC_CHANNEL_9
+  *         @arg @ref LL_ADC_CHANNEL_10
+  *         @arg @ref LL_ADC_CHANNEL_11
+  *         @arg @ref LL_ADC_CHANNEL_12
+  *         @arg @ref LL_ADC_CHANNEL_13
+  *         @arg @ref LL_ADC_CHANNEL_14
+  *         @arg @ref LL_ADC_CHANNEL_15
+  *         @arg @ref LL_ADC_CHANNEL_16
+  *         @arg @ref LL_ADC_CHANNEL_17
+  *         @arg @ref LL_ADC_CHANNEL_18
+  *         @arg @ref LL_ADC_CHANNEL_VREFINT      (1)
+  *         @arg @ref LL_ADC_CHANNEL_TEMPSENSOR   (1)(2)
+  *         @arg @ref LL_ADC_CHANNEL_VBAT         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.\n
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.
+  * @param  SamplingTime This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_15CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_28CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_56CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_84CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_112CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_144CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_480CYCLES
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t SamplingTime)
+{
+  /* Set bits with content of parameter "SamplingTime" with bits position     */
+  /* in register and register position depending on parameter "Channel".      */
+  /* Parameter "Channel" is used with masks because containing                */
+  /* other bits reserved for other purpose.                                   */
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SMPR1, __ADC_MASK_SHIFT(Channel, ADC_CHANNEL_SMPRX_REGOFFSET_MASK));
+  
+  MODIFY_REG(*preg,
+             ADC_SMPR2_SMP0 << __ADC_MASK_SHIFT(Channel, ADC_CHANNEL_SMPx_BITOFFSET_MASK),
+             SamplingTime   << __ADC_MASK_SHIFT(Channel, ADC_CHANNEL_SMPx_BITOFFSET_MASK));
+}
+
+/**
+  * @brief  Get sampling time of the selected ADC channel
+  *         Unit: ADC clock cycles.
+  * @note   On this device, sampling time is on channel scope: independently
+  *         of channel mapped on ADC group regular or injected.
+  * @note   Conversion time is the addition of sampling time and processing time.
+  *         Refer to reference manual for ADC processing time of
+  *         this STM32 series.
+  * @rmtoll SMPR1    SMP18          LL_ADC_GetChannelSamplingTime\n
+  *         SMPR1    SMP17          LL_ADC_GetChannelSamplingTime\n
+  *         SMPR1    SMP16          LL_ADC_GetChannelSamplingTime\n
+  *         SMPR1    SMP15          LL_ADC_GetChannelSamplingTime\n
+  *         SMPR1    SMP14          LL_ADC_GetChannelSamplingTime\n
+  *         SMPR1    SMP13          LL_ADC_GetChannelSamplingTime\n
+  *         SMPR1    SMP12          LL_ADC_GetChannelSamplingTime\n
+  *         SMPR1    SMP11          LL_ADC_GetChannelSamplingTime\n
+  *         SMPR1    SMP10          LL_ADC_GetChannelSamplingTime\n
+  *         SMPR2    SMP9           LL_ADC_GetChannelSamplingTime\n
+  *         SMPR2    SMP8           LL_ADC_GetChannelSamplingTime\n
+  *         SMPR2    SMP7           LL_ADC_GetChannelSamplingTime\n
+  *         SMPR2    SMP6           LL_ADC_GetChannelSamplingTime\n
+  *         SMPR2    SMP5           LL_ADC_GetChannelSamplingTime\n
+  *         SMPR2    SMP4           LL_ADC_GetChannelSamplingTime\n
+  *         SMPR2    SMP3           LL_ADC_GetChannelSamplingTime\n
+  *         SMPR2    SMP2           LL_ADC_GetChannelSamplingTime\n
+  *         SMPR2    SMP1           LL_ADC_GetChannelSamplingTime\n
+  *         SMPR2    SMP0           LL_ADC_GetChannelSamplingTime
+  * @param  ADCx ADC instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_CHANNEL_0
+  *         @arg @ref LL_ADC_CHANNEL_1
+  *         @arg @ref LL_ADC_CHANNEL_2
+  *         @arg @ref LL_ADC_CHANNEL_3
+  *         @arg @ref LL_ADC_CHANNEL_4
+  *         @arg @ref LL_ADC_CHANNEL_5
+  *         @arg @ref LL_ADC_CHANNEL_6
+  *         @arg @ref LL_ADC_CHANNEL_7
+  *         @arg @ref LL_ADC_CHANNEL_8
+  *         @arg @ref LL_ADC_CHANNEL_9
+  *         @arg @ref LL_ADC_CHANNEL_10
+  *         @arg @ref LL_ADC_CHANNEL_11
+  *         @arg @ref LL_ADC_CHANNEL_12
+  *         @arg @ref LL_ADC_CHANNEL_13
+  *         @arg @ref LL_ADC_CHANNEL_14
+  *         @arg @ref LL_ADC_CHANNEL_15
+  *         @arg @ref LL_ADC_CHANNEL_16
+  *         @arg @ref LL_ADC_CHANNEL_17
+  *         @arg @ref LL_ADC_CHANNEL_18
+  *         @arg @ref LL_ADC_CHANNEL_VREFINT      (1)
+  *         @arg @ref LL_ADC_CHANNEL_TEMPSENSOR   (1)(2)
+  *         @arg @ref LL_ADC_CHANNEL_VBAT         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.\n
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_15CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_28CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_56CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_84CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_112CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_144CYCLES
+  *         @arg @ref LL_ADC_SAMPLINGTIME_480CYCLES
+  */
+__STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel)
+{
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SMPR1, __ADC_MASK_SHIFT(Channel, ADC_CHANNEL_SMPRX_REGOFFSET_MASK));
+  
+  return (uint32_t)(READ_BIT(*preg,
+                             ADC_SMPR2_SMP0 << __ADC_MASK_SHIFT(Channel, ADC_CHANNEL_SMPx_BITOFFSET_MASK))
+                    >> __ADC_MASK_SHIFT(Channel, ADC_CHANNEL_SMPx_BITOFFSET_MASK)
+                   );
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EF_Configuration_ADC_AnalogWatchdog Configuration of ADC transversal scope: analog watchdog
+  * @{
+  */
+
+/**
+  * @brief  Set ADC analog watchdog monitored channels:
+  *         a single channel or all channels,
+  *         on ADC groups regular and-or injected.
+  * @note   Once monitored channels are selected, analog watchdog
+  *         is enabled.
+  * @note   In case of need to define a single channel to monitor
+  *         with analog watchdog from sequencer channel definition,
+  *         use helper macro @ref __LL_ADC_ANALOGWD_CHANNEL_GROUP().
+  * @note   On this STM32 series, there is only 1 kind of analog watchdog
+  *         instance:
+  *         - AWD standard (instance AWD1):
+  *           - channels monitored: can monitor 1 channel or all channels.
+  *           - groups monitored: ADC groups regular and-or injected.
+  *           - resolution: resolution is not limited (corresponds to
+  *             ADC resolution configured).
+  * @rmtoll CR1      AWD1CH         LL_ADC_SetAnalogWDMonitChannels\n
+  *         CR1      AWD1SGL        LL_ADC_SetAnalogWDMonitChannels\n
+  *         CR1      AWD1EN         LL_ADC_SetAnalogWDMonitChannels
+  * @param  ADCx ADC instance
+  * @param  AWDChannelGroup This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_AWD_DISABLE
+  *         @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG
+  *         @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ
+  *         @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_0_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_0_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_1_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_1_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_2_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_2_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_3_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_3_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_4_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_4_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_5_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_5_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_6_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_6_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_7_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_7_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_8_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_8_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_9_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_9_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_10_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_10_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_11_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_11_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_12_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_12_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_13_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_13_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_14_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_14_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_15_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_15_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_16_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_16_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_17_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_17_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_18_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_18_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CH_VREFINT_REG          (1)
+  *         @arg @ref LL_ADC_AWD_CH_VREFINT_INJ          (1)
+  *         @arg @ref LL_ADC_AWD_CH_VREFINT_REG_INJ      (1)
+  *         @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG       (1)(2)
+  *         @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ       (1)(2)
+  *         @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ   (1)(2)
+  *         @arg @ref LL_ADC_AWD_CH_VBAT_REG             (1)
+  *         @arg @ref LL_ADC_AWD_CH_VBAT_INJ             (1)
+  *         @arg @ref LL_ADC_AWD_CH_VBAT_REG_INJ         (1)
+  *         
+  *         (1) On STM32F4, parameter available only on ADC instance: ADC1.\n
+  *         (2) On devices STM32F42x and STM32F43x, limitation: this internal channel is shared between temperature sensor and Vbat, only 1 measurement path must be enabled.
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDChannelGroup)
+{
+  MODIFY_REG(ADCx->CR1,
+             (ADC_CR1_AWDEN | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL | ADC_CR1_AWDCH),
+             AWDChannelGroup);
+}
+
+/**
+  * @brief  Get ADC analog watchdog monitored channel.
+  * @note   Usage of the returned channel number:
+  *         - To reinject this channel into another function LL_ADC_xxx:
+  *           the returned channel number is only partly formatted on definition
+  *           of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared
+  *           with parts of literals LL_ADC_CHANNEL_x or using
+  *           helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB().
+  *           Then the selected literal LL_ADC_CHANNEL_x can be used
+  *           as parameter for another function.
+  *         - To get the channel number in decimal format:
+  *           process the returned value with the helper macro
+  *           @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB().
+  *           Applicable only when the analog watchdog is set to monitor
+  *           one channel.
+  * @note   On this STM32 series, there is only 1 kind of analog watchdog
+  *         instance:
+  *         - AWD standard (instance AWD1):
+  *           - channels monitored: can monitor 1 channel or all channels.
+  *           - groups monitored: ADC groups regular and-or injected.
+  *           - resolution: resolution is not limited (corresponds to
+  *             ADC resolution configured).
+  * @rmtoll CR1      AWD1CH         LL_ADC_GetAnalogWDMonitChannels\n
+  *         CR1      AWD1SGL        LL_ADC_GetAnalogWDMonitChannels\n
+  *         CR1      AWD1EN         LL_ADC_GetAnalogWDMonitChannels
+  * @param  ADCx ADC instance
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_AWD_DISABLE
+  *         @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG
+  *         @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ
+  *         @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_0_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_0_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_1_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_1_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_2_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_2_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_3_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_3_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_4_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_4_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_5_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_5_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_6_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_6_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_7_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_7_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_8_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_8_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_9_REG 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_9_INJ 
+  *         @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_10_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_10_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_11_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_11_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_12_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_12_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_13_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_13_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_14_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_14_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_15_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_15_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_16_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_16_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_17_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_17_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_18_REG
+  *         @arg @ref LL_ADC_AWD_CHANNEL_18_INJ
+  *         @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ
+  */
+__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx)
+{
+  return (uint32_t)(READ_BIT(ADCx->CR1, (ADC_CR1_AWDEN | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL | ADC_CR1_AWDCH)));
+}
+
+/**
+  * @brief  Set ADC analog watchdog threshold value of threshold
+  *         high or low.
+  * @note   In case of ADC resolution different of 12 bits,
+  *         analog watchdog thresholds data require a specific shift.
+  *         Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION().
+  * @note   On this STM32 series, there is only 1 kind of analog watchdog
+  *         instance:
+  *         - AWD standard (instance AWD1):
+  *           - channels monitored: can monitor 1 channel or all channels.
+  *           - groups monitored: ADC groups regular and-or injected.
+  *           - resolution: resolution is not limited (corresponds to
+  *             ADC resolution configured).
+  * @rmtoll HTR      HT             LL_ADC_SetAnalogWDThresholds\n
+  *         LTR      LT             LL_ADC_SetAnalogWDThresholds
+  * @param  ADCx ADC instance
+  * @param  AWDThresholdsHighLow This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_AWD_THRESHOLD_HIGH
+  *         @arg @ref LL_ADC_AWD_THRESHOLD_LOW
+  * @param  AWDThresholdValue Value between Min_Data=0x000 and Max_Data=0xFFF
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDThresholdsHighLow, uint32_t AWDThresholdValue)
+{
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->HTR, AWDThresholdsHighLow);
+  
+  MODIFY_REG(*preg,
+             ADC_HTR_HT,
+             AWDThresholdValue);
+}
+
+/**
+  * @brief  Get ADC analog watchdog threshold value of threshold high or
+  *         threshold low.
+  * @note   In case of ADC resolution different of 12 bits,
+  *         analog watchdog thresholds data require a specific shift.
+  *         Use helper macro @ref __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION().
+  * @rmtoll HTR      HT             LL_ADC_GetAnalogWDThresholds\n
+  *         LTR      LT             LL_ADC_GetAnalogWDThresholds
+  * @param  ADCx ADC instance
+  * @param  AWDThresholdsHighLow This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_AWD_THRESHOLD_HIGH
+  *         @arg @ref LL_ADC_AWD_THRESHOLD_LOW
+  * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
+*/
+__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDThresholdsHighLow)
+{
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->HTR, AWDThresholdsHighLow);
+  
+  return (uint32_t)(READ_BIT(*preg, ADC_HTR_HT));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EF_Configuration_ADC_Multimode Configuration of ADC hierarchical scope: multimode
+  * @{
+  */
+
+#if defined(ADC_MULTIMODE_SUPPORT)
+/**
+  * @brief  Set ADC multimode configuration to operate in independent mode
+  *         or multimode (for devices with several ADC instances).
+  * @note   If multimode configuration: the selected ADC instance is
+  *         either master or slave depending on hardware.
+  *         Refer to reference manual.
+  * @rmtoll CCR      MULTI          LL_ADC_SetMultimode
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @param  Multimode This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_MULTI_INDEPENDENT
+  *         @arg @ref LL_ADC_MULTI_DUAL_REG_SIMULT
+  *         @arg @ref LL_ADC_MULTI_DUAL_REG_INTERL
+  *         @arg @ref LL_ADC_MULTI_DUAL_INJ_SIMULT
+  *         @arg @ref LL_ADC_MULTI_DUAL_INJ_ALTERN
+  *         @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM
+  *         @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT
+  *         @arg @ref LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM
+  *         @arg @ref LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_SIM
+  *         @arg @ref LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_ALT
+  *         @arg @ref LL_ADC_MULTI_TRIPLE_INJ_SIMULT
+  *         @arg @ref LL_ADC_MULTI_TRIPLE_REG_SIMULT
+  *         @arg @ref LL_ADC_MULTI_TRIPLE_REG_INTERL
+  *         @arg @ref LL_ADC_MULTI_TRIPLE_INJ_ALTERN
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_SetMultimode(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t Multimode)
+{
+  MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_MULTI, Multimode);
+}
+
+/**
+  * @brief  Get ADC multimode configuration to operate in independent mode
+  *         or multimode (for devices with several ADC instances).
+  * @note   If multimode configuration: the selected ADC instance is
+  *         either master or slave depending on hardware.
+  *         Refer to reference manual.
+  * @rmtoll CCR      MULTI          LL_ADC_GetMultimode
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_MULTI_INDEPENDENT
+  *         @arg @ref LL_ADC_MULTI_DUAL_REG_SIMULT
+  *         @arg @ref LL_ADC_MULTI_DUAL_REG_INTERL
+  *         @arg @ref LL_ADC_MULTI_DUAL_INJ_SIMULT
+  *         @arg @ref LL_ADC_MULTI_DUAL_INJ_ALTERN
+  *         @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM
+  *         @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT
+  *         @arg @ref LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM
+  *         @arg @ref LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_SIM
+  *         @arg @ref LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_ALT
+  *         @arg @ref LL_ADC_MULTI_TRIPLE_INJ_SIMULT
+  *         @arg @ref LL_ADC_MULTI_TRIPLE_REG_SIMULT
+  *         @arg @ref LL_ADC_MULTI_TRIPLE_REG_INTERL
+  *         @arg @ref LL_ADC_MULTI_TRIPLE_INJ_ALTERN
+  */
+__STATIC_INLINE uint32_t LL_ADC_GetMultimode(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_MULTI));
+}
+
+/**
+  * @brief  Set ADC multimode conversion data transfer: no transfer
+  *         or transfer by DMA.
+  * @note   If ADC multimode transfer by DMA is not selected:
+  *         each ADC uses its own DMA channel, with its individual
+  *         DMA transfer settings.
+  *         If ADC multimode transfer by DMA is selected:
+  *         One DMA channel is used for both ADC (DMA of ADC master)
+  *         Specifies the DMA requests mode:
+  *         - Limited mode (One shot mode): DMA transfer requests are stopped
+  *           when number of DMA data transfers (number of
+  *           ADC conversions) is reached.
+  *           This ADC mode is intended to be used with DMA mode non-circular.
+  *         - Unlimited mode: DMA transfer requests are unlimited,
+  *           whatever number of DMA data transfers (number of
+  *           ADC conversions).
+  *           This ADC mode is intended to be used with DMA mode circular.
+  * @note   If ADC DMA requests mode is set to unlimited and DMA is set to
+  *         mode non-circular:
+  *         when DMA transfers size will be reached, DMA will stop transfers of
+  *         ADC conversions data ADC will raise an overrun error
+  *         (overrun flag and interruption if enabled).
+  * @note   How to retrieve multimode conversion data:
+  *         Whatever multimode transfer by DMA setting: using function
+  *         @ref LL_ADC_REG_ReadMultiConversionData32().
+  *         If ADC multimode transfer by DMA is selected: conversion data
+  *         is a raw data with ADC master and slave concatenated.
+  *         A macro is available to get the conversion data of
+  *         ADC master or ADC slave: see helper macro
+  *         @ref __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE().
+  * @rmtoll CCR      MDMA           LL_ADC_SetMultiDMATransfer\n
+  *         CCR      DDS            LL_ADC_SetMultiDMATransfer
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @param  MultiDMATransfer This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_EACH_ADC
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_1
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_2
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_3
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_1
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_2
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_3
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_SetMultiDMATransfer(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t MultiDMATransfer)
+{
+  MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_DMA | ADC_CCR_DDS, MultiDMATransfer);
+}
+
+/**
+  * @brief  Get ADC multimode conversion data transfer: no transfer
+  *         or transfer by DMA.
+  * @note   If ADC multimode transfer by DMA is not selected:
+  *         each ADC uses its own DMA channel, with its individual
+  *         DMA transfer settings.
+  *         If ADC multimode transfer by DMA is selected:
+  *         One DMA channel is used for both ADC (DMA of ADC master)
+  *         Specifies the DMA requests mode:
+  *         - Limited mode (One shot mode): DMA transfer requests are stopped
+  *           when number of DMA data transfers (number of
+  *           ADC conversions) is reached.
+  *           This ADC mode is intended to be used with DMA mode non-circular.
+  *         - Unlimited mode: DMA transfer requests are unlimited,
+  *           whatever number of DMA data transfers (number of
+  *           ADC conversions).
+  *           This ADC mode is intended to be used with DMA mode circular.
+  * @note   If ADC DMA requests mode is set to unlimited and DMA is set to
+  *         mode non-circular:
+  *         when DMA transfers size will be reached, DMA will stop transfers of
+  *         ADC conversions data ADC will raise an overrun error
+  *         (overrun flag and interruption if enabled).
+  * @note   How to retrieve multimode conversion data:
+  *         Whatever multimode transfer by DMA setting: using function
+  *         @ref LL_ADC_REG_ReadMultiConversionData32().
+  *         If ADC multimode transfer by DMA is selected: conversion data
+  *         is a raw data with ADC master and slave concatenated.
+  *         A macro is available to get the conversion data of
+  *         ADC master or ADC slave: see helper macro
+  *         @ref __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE().
+  * @rmtoll CCR      MDMA           LL_ADC_GetMultiDMATransfer\n
+  *         CCR      DDS            LL_ADC_GetMultiDMATransfer
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_EACH_ADC
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_1
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_2
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_3
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_1
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_2
+  *         @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_3
+  */
+__STATIC_INLINE uint32_t LL_ADC_GetMultiDMATransfer(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_DMA | ADC_CCR_DDS));
+}
+
+/**
+  * @brief  Set ADC multimode delay between 2 sampling phases.
+  * @note   The sampling delay range depends on ADC resolution:
+  *         - ADC resolution 12 bits can have maximum delay of 12 cycles.
+  *         - ADC resolution 10 bits can have maximum delay of 10 cycles.
+  *         - ADC resolution  8 bits can have maximum delay of  8 cycles.
+  *         - ADC resolution  6 bits can have maximum delay of  6 cycles.
+  * @rmtoll CCR      DELAY          LL_ADC_SetMultiTwoSamplingDelay
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @param  MultiTwoSamplingDelay This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_13CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_15CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_16CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_17CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_18CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_19CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_20CYCLES
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_SetMultiTwoSamplingDelay(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t MultiTwoSamplingDelay)
+{
+  MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_DELAY, MultiTwoSamplingDelay);
+}
+
+/**
+  * @brief  Get ADC multimode delay between 2 sampling phases.
+  * @rmtoll CCR      DELAY          LL_ADC_GetMultiTwoSamplingDelay
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_13CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_15CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_16CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_17CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_18CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_19CYCLES
+  *         @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_20CYCLES
+  */
+__STATIC_INLINE uint32_t LL_ADC_GetMultiTwoSamplingDelay(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_DELAY));
+}
+#endif /* ADC_MULTIMODE_SUPPORT */
+
+/**
+  * @}
+  */
+/** @defgroup ADC_LL_EF_Operation_ADC_Instance Operation on ADC hierarchical scope: ADC instance
+  * @{
+  */
+
+/**
+  * @brief  Enable the selected ADC instance.
+  * @note   On this STM32 series, after ADC enable, a delay for 
+  *         ADC internal analog stabilization is required before performing a
+  *         ADC conversion start.
+  *         Refer to device datasheet, parameter tSTAB.
+  * @rmtoll CR2      ADON           LL_ADC_Enable
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_Enable(ADC_TypeDef *ADCx)
+{
+  SET_BIT(ADCx->CR2, ADC_CR2_ADON);
+}
+
+/**
+  * @brief  Disable the selected ADC instance.
+  * @rmtoll CR2      ADON           LL_ADC_Disable
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_Disable(ADC_TypeDef *ADCx)
+{
+  CLEAR_BIT(ADCx->CR2, ADC_CR2_ADON);
+}
+
+/**
+  * @brief  Get the selected ADC instance enable state.
+  * @rmtoll CR2      ADON           LL_ADC_IsEnabled
+  * @param  ADCx ADC instance
+  * @retval 0: ADC is disabled, 1: ADC is enabled.
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsEnabled(ADC_TypeDef *ADCx)
+{
+  return (READ_BIT(ADCx->CR2, ADC_CR2_ADON) == (ADC_CR2_ADON));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EF_Operation_ADC_Group_Regular Operation on ADC hierarchical scope: group regular
+  * @{
+  */
+
+/**
+  * @brief  Start ADC group regular conversion.
+  * @note   On this STM32 series, this function is relevant only for
+  *         internal trigger (SW start), not for external trigger:
+  *         - If ADC trigger has been set to software start, ADC conversion
+  *           starts immediately.
+  *         - If ADC trigger has been set to external trigger, ADC conversion
+  *           start must be performed using function 
+  *           @ref LL_ADC_REG_StartConversionExtTrig().
+  *           (if external trigger edge would have been set during ADC other 
+  *           settings, ADC conversion would start at trigger event
+  *           as soon as ADC is enabled).
+  * @rmtoll CR2      SWSTART        LL_ADC_REG_StartConversionSWStart
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_REG_StartConversionSWStart(ADC_TypeDef *ADCx)
+{
+  SET_BIT(ADCx->CR2, ADC_CR2_SWSTART);
+}
+
+/**
+  * @brief  Start ADC group regular conversion from external trigger.
+  * @note   ADC conversion will start at next trigger event (on the selected
+  *         trigger edge) following the ADC start conversion command.
+  * @note   On this STM32 series, this function is relevant for 
+  *         ADC conversion start from external trigger.
+  *         If internal trigger (SW start) is needed, perform ADC conversion
+  *         start using function @ref LL_ADC_REG_StartConversionSWStart().
+  * @rmtoll CR2      EXTEN          LL_ADC_REG_StartConversionExtTrig
+  * @param  ExternalTriggerEdge This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_RISING
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_FALLING
+  *         @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_REG_StartConversionExtTrig(ADC_TypeDef *ADCx, uint32_t ExternalTriggerEdge)
+{
+  SET_BIT(ADCx->CR2, ExternalTriggerEdge);
+}
+
+/**
+  * @brief  Stop ADC group regular conversion from external trigger.
+  * @note   No more ADC conversion will start at next trigger event
+  *         following the ADC stop conversion command.
+  *         If a conversion is on-going, it will be completed.
+  * @note   On this STM32 series, there is no specific command
+  *         to stop a conversion on-going or to stop ADC converting
+  *         in continuous mode. These actions can be performed
+  *         using function @ref LL_ADC_Disable().
+  * @rmtoll CR2      EXTEN          LL_ADC_REG_StopConversionExtTrig
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_REG_StopConversionExtTrig(ADC_TypeDef *ADCx)
+{
+  CLEAR_BIT(ADCx->CR2, ADC_CR2_EXTEN);
+}
+
+/**
+  * @brief  Get ADC group regular conversion data, range fit for
+  *         all ADC configurations: all ADC resolutions and
+  *         all oversampling increased data width (for devices
+  *         with feature oversampling).
+  * @rmtoll DR       RDATA          LL_ADC_REG_ReadConversionData32
+  * @param  ADCx ADC instance
+  * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF
+  */
+__STATIC_INLINE uint32_t LL_ADC_REG_ReadConversionData32(ADC_TypeDef *ADCx)
+{
+  return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA));
+}
+
+/**
+  * @brief  Get ADC group regular conversion data, range fit for
+  *         ADC resolution 12 bits.
+  * @note   For devices with feature oversampling: Oversampling
+  *         can increase data width, function for extended range
+  *         may be needed: @ref LL_ADC_REG_ReadConversionData32.
+  * @rmtoll DR       RDATA          LL_ADC_REG_ReadConversionData12
+  * @param  ADCx ADC instance
+  * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
+  */
+__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData12(ADC_TypeDef *ADCx)
+{
+  return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA));
+}
+
+/**
+  * @brief  Get ADC group regular conversion data, range fit for
+  *         ADC resolution 10 bits.
+  * @note   For devices with feature oversampling: Oversampling
+  *         can increase data width, function for extended range
+  *         may be needed: @ref LL_ADC_REG_ReadConversionData32.
+  * @rmtoll DR       RDATA          LL_ADC_REG_ReadConversionData10
+  * @param  ADCx ADC instance
+  * @retval Value between Min_Data=0x000 and Max_Data=0x3FF
+  */
+__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData10(ADC_TypeDef *ADCx)
+{
+  return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA));
+}
+
+/**
+  * @brief  Get ADC group regular conversion data, range fit for
+  *         ADC resolution 8 bits.
+  * @note   For devices with feature oversampling: Oversampling
+  *         can increase data width, function for extended range
+  *         may be needed: @ref LL_ADC_REG_ReadConversionData32.
+  * @rmtoll DR       RDATA          LL_ADC_REG_ReadConversionData8
+  * @param  ADCx ADC instance
+  * @retval Value between Min_Data=0x00 and Max_Data=0xFF
+  */
+__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData8(ADC_TypeDef *ADCx)
+{
+  return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA));
+}
+
+/**
+  * @brief  Get ADC group regular conversion data, range fit for
+  *         ADC resolution 6 bits.
+  * @note   For devices with feature oversampling: Oversampling
+  *         can increase data width, function for extended range
+  *         may be needed: @ref LL_ADC_REG_ReadConversionData32.
+  * @rmtoll DR       RDATA          LL_ADC_REG_ReadConversionData6
+  * @param  ADCx ADC instance
+  * @retval Value between Min_Data=0x00 and Max_Data=0x3F
+  */
+__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(ADC_TypeDef *ADCx)
+{
+  return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA));
+}
+
+#if defined(ADC_MULTIMODE_SUPPORT)
+/**
+  * @brief  Get ADC multimode conversion data of ADC master, ADC slave
+  *         or raw data with ADC master and slave concatenated.
+  * @note   If raw data with ADC master and slave concatenated is retrieved,
+  *         a macro is available to get the conversion data of
+  *         ADC master or ADC slave: see helper macro
+  *         @ref __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE().
+  *         (however this macro is mainly intended for multimode
+  *         transfer by DMA, because this function can do the same
+  *         by getting multimode conversion data of ADC master or ADC slave
+  *         separately).
+  * @rmtoll CDR      DATA1          LL_ADC_REG_ReadMultiConversionData32\n
+  *         CDR      DATA2          LL_ADC_REG_ReadMultiConversionData32
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @param  ConversionData This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_MULTI_MASTER
+  *         @arg @ref LL_ADC_MULTI_SLAVE
+  *         @arg @ref LL_ADC_MULTI_MASTER_SLAVE
+  * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF
+  */
+__STATIC_INLINE uint32_t LL_ADC_REG_ReadMultiConversionData32(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t ConversionData)
+{
+  return (uint32_t)(READ_BIT(ADCxy_COMMON->CDR,
+                             ADC_DR_ADC2DATA)
+                    >> POSITION_VAL(ConversionData)
+                   );
+}
+#endif /* ADC_MULTIMODE_SUPPORT */
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EF_Operation_ADC_Group_Injected Operation on ADC hierarchical scope: group injected
+  * @{
+  */
+
+/**
+  * @brief  Start ADC group injected conversion.
+  * @note   On this STM32 series, this function is relevant only for
+  *         internal trigger (SW start), not for external trigger:
+  *         - If ADC trigger has been set to software start, ADC conversion
+  *           starts immediately.
+  *         - If ADC trigger has been set to external trigger, ADC conversion
+  *           start must be performed using function 
+  *           @ref LL_ADC_INJ_StartConversionExtTrig().
+  *           (if external trigger edge would have been set during ADC other 
+  *           settings, ADC conversion would start at trigger event
+  *           as soon as ADC is enabled).
+  * @rmtoll CR2      JSWSTART       LL_ADC_INJ_StartConversionSWStart
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_INJ_StartConversionSWStart(ADC_TypeDef *ADCx)
+{
+  SET_BIT(ADCx->CR2, ADC_CR2_JSWSTART);
+}
+
+/**
+  * @brief  Start ADC group injected conversion from external trigger.
+  * @note   ADC conversion will start at next trigger event (on the selected
+  *         trigger edge) following the ADC start conversion command.
+  * @note   On this STM32 series, this function is relevant for 
+  *         ADC conversion start from external trigger.
+  *         If internal trigger (SW start) is needed, perform ADC conversion
+  *         start using function @ref LL_ADC_INJ_StartConversionSWStart().
+  * @rmtoll CR2      JEXTEN         LL_ADC_INJ_StartConversionExtTrig
+  * @param  ExternalTriggerEdge This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_RISING
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_FALLING
+  *         @arg @ref LL_ADC_INJ_TRIG_EXT_RISINGFALLING
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_INJ_StartConversionExtTrig(ADC_TypeDef *ADCx, uint32_t ExternalTriggerEdge)
+{
+  SET_BIT(ADCx->CR2, ExternalTriggerEdge);
+}
+
+/**
+  * @brief  Stop ADC group injected conversion from external trigger.
+  * @note   No more ADC conversion will start at next trigger event
+  *         following the ADC stop conversion command.
+  *         If a conversion is on-going, it will be completed.
+  * @note   On this STM32 series, there is no specific command
+  *         to stop a conversion on-going or to stop ADC converting
+  *         in continuous mode. These actions can be performed
+  *         using function @ref LL_ADC_Disable().
+  * @rmtoll CR2      JEXTEN         LL_ADC_INJ_StopConversionExtTrig
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_INJ_StopConversionExtTrig(ADC_TypeDef *ADCx)
+{
+  CLEAR_BIT(ADCx->CR2, ADC_CR2_JEXTEN);
+}
+
+/**
+  * @brief  Get ADC group regular conversion data, range fit for
+  *         all ADC configurations: all ADC resolutions and
+  *         all oversampling increased data width (for devices
+  *         with feature oversampling).
+  * @rmtoll JDR1     JDATA          LL_ADC_INJ_ReadConversionData32\n
+  *         JDR2     JDATA          LL_ADC_INJ_ReadConversionData32\n
+  *         JDR3     JDATA          LL_ADC_INJ_ReadConversionData32\n
+  *         JDR4     JDATA          LL_ADC_INJ_ReadConversionData32
+  * @param  ADCx ADC instance
+  * @param  Rank This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_RANK_1
+  *         @arg @ref LL_ADC_INJ_RANK_2
+  *         @arg @ref LL_ADC_INJ_RANK_3
+  *         @arg @ref LL_ADC_INJ_RANK_4
+  * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF
+  */
+__STATIC_INLINE uint32_t LL_ADC_INJ_ReadConversionData32(ADC_TypeDef *ADCx, uint32_t Rank)
+{
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JDRX_REGOFFSET_MASK));
+  
+  return (uint32_t)(READ_BIT(*preg,
+                             ADC_JDR1_JDATA)
+                   );
+}
+
+/**
+  * @brief  Get ADC group injected conversion data, range fit for
+  *         ADC resolution 12 bits.
+  * @note   For devices with feature oversampling: Oversampling
+  *         can increase data width, function for extended range
+  *         may be needed: @ref LL_ADC_INJ_ReadConversionData32.
+  * @rmtoll JDR1     JDATA          LL_ADC_INJ_ReadConversionData12\n
+  *         JDR2     JDATA          LL_ADC_INJ_ReadConversionData12\n
+  *         JDR3     JDATA          LL_ADC_INJ_ReadConversionData12\n
+  *         JDR4     JDATA          LL_ADC_INJ_ReadConversionData12
+  * @param  ADCx ADC instance
+  * @param  Rank This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_RANK_1
+  *         @arg @ref LL_ADC_INJ_RANK_2
+  *         @arg @ref LL_ADC_INJ_RANK_3
+  *         @arg @ref LL_ADC_INJ_RANK_4
+  * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
+  */
+__STATIC_INLINE uint16_t LL_ADC_INJ_ReadConversionData12(ADC_TypeDef *ADCx, uint32_t Rank)
+{
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JDRX_REGOFFSET_MASK));
+  
+  return (uint16_t)(READ_BIT(*preg,
+                             ADC_JDR1_JDATA)
+                   );
+}
+
+/**
+  * @brief  Get ADC group injected conversion data, range fit for
+  *         ADC resolution 10 bits.
+  * @note   For devices with feature oversampling: Oversampling
+  *         can increase data width, function for extended range
+  *         may be needed: @ref LL_ADC_INJ_ReadConversionData32.
+  * @rmtoll JDR1     JDATA          LL_ADC_INJ_ReadConversionData10\n
+  *         JDR2     JDATA          LL_ADC_INJ_ReadConversionData10\n
+  *         JDR3     JDATA          LL_ADC_INJ_ReadConversionData10\n
+  *         JDR4     JDATA          LL_ADC_INJ_ReadConversionData10
+  * @param  ADCx ADC instance
+  * @param  Rank This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_RANK_1
+  *         @arg @ref LL_ADC_INJ_RANK_2
+  *         @arg @ref LL_ADC_INJ_RANK_3
+  *         @arg @ref LL_ADC_INJ_RANK_4
+  * @retval Value between Min_Data=0x000 and Max_Data=0x3FF
+  */
+__STATIC_INLINE uint16_t LL_ADC_INJ_ReadConversionData10(ADC_TypeDef *ADCx, uint32_t Rank)
+{
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JDRX_REGOFFSET_MASK));
+  
+  return (uint16_t)(READ_BIT(*preg,
+                             ADC_JDR1_JDATA)
+                   );
+}
+
+/**
+  * @brief  Get ADC group injected conversion data, range fit for
+  *         ADC resolution 8 bits.
+  * @note   For devices with feature oversampling: Oversampling
+  *         can increase data width, function for extended range
+  *         may be needed: @ref LL_ADC_INJ_ReadConversionData32.
+  * @rmtoll JDR1     JDATA          LL_ADC_INJ_ReadConversionData8\n
+  *         JDR2     JDATA          LL_ADC_INJ_ReadConversionData8\n
+  *         JDR3     JDATA          LL_ADC_INJ_ReadConversionData8\n
+  *         JDR4     JDATA          LL_ADC_INJ_ReadConversionData8
+  * @param  ADCx ADC instance
+  * @param  Rank This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_RANK_1
+  *         @arg @ref LL_ADC_INJ_RANK_2
+  *         @arg @ref LL_ADC_INJ_RANK_3
+  *         @arg @ref LL_ADC_INJ_RANK_4
+  * @retval Value between Min_Data=0x00 and Max_Data=0xFF
+  */
+__STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData8(ADC_TypeDef *ADCx, uint32_t Rank)
+{
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JDRX_REGOFFSET_MASK));
+  
+  return (uint8_t)(READ_BIT(*preg,
+                            ADC_JDR1_JDATA)
+                  );
+}
+
+/**
+  * @brief  Get ADC group injected conversion data, range fit for
+  *         ADC resolution 6 bits.
+  * @note   For devices with feature oversampling: Oversampling
+  *         can increase data width, function for extended range
+  *         may be needed: @ref LL_ADC_INJ_ReadConversionData32.
+  * @rmtoll JDR1     JDATA          LL_ADC_INJ_ReadConversionData6\n
+  *         JDR2     JDATA          LL_ADC_INJ_ReadConversionData6\n
+  *         JDR3     JDATA          LL_ADC_INJ_ReadConversionData6\n
+  *         JDR4     JDATA          LL_ADC_INJ_ReadConversionData6
+  * @param  ADCx ADC instance
+  * @param  Rank This parameter can be one of the following values:
+  *         @arg @ref LL_ADC_INJ_RANK_1
+  *         @arg @ref LL_ADC_INJ_RANK_2
+  *         @arg @ref LL_ADC_INJ_RANK_3
+  *         @arg @ref LL_ADC_INJ_RANK_4
+  * @retval Value between Min_Data=0x00 and Max_Data=0x3F
+  */
+__STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData6(ADC_TypeDef *ADCx, uint32_t Rank)
+{
+  __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JDRX_REGOFFSET_MASK));
+  
+  return (uint8_t)(READ_BIT(*preg,
+                            ADC_JDR1_JDATA)
+                  );
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EF_FLAG_Management ADC flag management
+  * @{
+  */
+
+/**
+  * @brief  Get flag ADC group regular end of unitary conversion
+  *         or end of sequence conversions, depending on
+  *         ADC configuration.
+  * @note   To configure flag of end of conversion,
+  *         use function @ref LL_ADC_REG_SetFlagEndOfConversion().
+  * @rmtoll SR       EOC            LL_ADC_IsActiveFlag_EOCS
+  * @param  ADCx ADC instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOCS(ADC_TypeDef *ADCx)
+{
+  return (READ_BIT(ADCx->SR, LL_ADC_FLAG_EOCS) == (LL_ADC_FLAG_EOCS));
+}
+
+/**
+  * @brief  Get flag ADC group regular overrun.
+  * @rmtoll SR       OVR            LL_ADC_IsActiveFlag_OVR
+  * @param  ADCx ADC instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_OVR(ADC_TypeDef *ADCx)
+{
+  return (READ_BIT(ADCx->SR, LL_ADC_FLAG_OVR) == (LL_ADC_FLAG_OVR));
+}
+
+
+/**
+  * @brief  Get flag ADC group injected end of sequence conversions.
+  * @rmtoll SR       JEOC           LL_ADC_IsActiveFlag_JEOS
+  * @param  ADCx ADC instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JEOS(ADC_TypeDef *ADCx)
+{
+  /* Note: on this STM32 series, there is no flag ADC group injected          */
+  /*       end of unitary conversion.                                         */
+  /*       Flag noted as "JEOC" is corresponding to flag "JEOS"               */
+  /*       in other STM32 families).                                          */
+  return (READ_BIT(ADCx->SR, LL_ADC_FLAG_JEOS) == (LL_ADC_FLAG_JEOS));
+}
+
+/**
+  * @brief  Get flag ADC analog watchdog 1 flag
+  * @rmtoll SR       AWD            LL_ADC_IsActiveFlag_AWD1
+  * @param  ADCx ADC instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD1(ADC_TypeDef *ADCx)
+{
+  return (READ_BIT(ADCx->SR, LL_ADC_FLAG_AWD1) == (LL_ADC_FLAG_AWD1));
+}
+
+/**
+  * @brief  Clear flag ADC group regular end of unitary conversion
+  *         or end of sequence conversions, depending on
+  *         ADC configuration.
+  * @note   To configure flag of end of conversion,
+  *         use function @ref LL_ADC_REG_SetFlagEndOfConversion().
+  * @rmtoll SR       EOC            LL_ADC_ClearFlag_EOCS
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_ClearFlag_EOCS(ADC_TypeDef *ADCx)
+{
+  WRITE_REG(ADCx->SR, ~LL_ADC_FLAG_EOCS);
+}
+
+/**
+  * @brief  Clear flag ADC group regular overrun.
+  * @rmtoll SR       OVR            LL_ADC_ClearFlag_OVR
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_ClearFlag_OVR(ADC_TypeDef *ADCx)
+{
+  WRITE_REG(ADCx->SR, ~LL_ADC_FLAG_OVR);
+}
+
+
+/**
+  * @brief  Clear flag ADC group injected end of sequence conversions.
+  * @rmtoll SR       JEOC           LL_ADC_ClearFlag_JEOS
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_ClearFlag_JEOS(ADC_TypeDef *ADCx)
+{
+  /* Note: on this STM32 series, there is no flag ADC group injected          */
+  /*       end of unitary conversion.                                         */
+  /*       Flag noted as "JEOC" is corresponding to flag "JEOS"               */
+  /*       in other STM32 families).                                          */
+  WRITE_REG(ADCx->SR, ~LL_ADC_FLAG_JEOS);
+}
+
+/**
+  * @brief  Clear flag ADC analog watchdog 1.
+  * @rmtoll SR       AWD            LL_ADC_ClearFlag_AWD1
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_ClearFlag_AWD1(ADC_TypeDef *ADCx)
+{
+  WRITE_REG(ADCx->SR, ~LL_ADC_FLAG_AWD1);
+}
+
+#if defined(ADC_MULTIMODE_SUPPORT)
+/**
+  * @brief  Get flag multimode ADC group regular end of unitary conversion
+  *         or end of sequence conversions, depending on
+  *         ADC configuration, of the ADC master.
+  * @note   To configure flag of end of conversion,
+  *         use function @ref LL_ADC_REG_SetFlagEndOfConversion().
+  * @rmtoll CSR      EOC1           LL_ADC_IsActiveFlag_MST_EOCS
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_EOCS(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOCS_MST) == (LL_ADC_FLAG_EOCS_MST));
+}
+
+/**
+  * @brief  Get flag multimode ADC group regular end of unitary conversion
+  *         or end of sequence conversions, depending on
+  *         ADC configuration, of the ADC slave 1.
+  * @note   To configure flag of end of conversion,
+  *         use function @ref LL_ADC_REG_SetFlagEndOfConversion().
+  * @rmtoll CSR      EOC2           LL_ADC_IsActiveFlag_SLV1_EOCS
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV1_EOCS(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOCS_SLV1) == (LL_ADC_FLAG_EOCS_SLV1));
+}
+
+/**
+  * @brief  Get flag multimode ADC group regular end of unitary conversion
+  *         or end of sequence conversions, depending on
+  *         ADC configuration, of the ADC slave 2.
+  * @note   To configure flag of end of conversion,
+  *         use function @ref LL_ADC_REG_SetFlagEndOfConversion().
+  * @rmtoll CSR      EOC3           LL_ADC_IsActiveFlag_SLV2_EOCS
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV2_EOCS(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOCS_SLV2) == (LL_ADC_FLAG_EOCS_SLV2));
+}
+/**
+  * @brief  Get flag multimode ADC group regular overrun of the ADC master.
+  * @rmtoll CSR      OVR1           LL_ADC_IsActiveFlag_MST_OVR
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_OVR(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_OVR_MST) == (LL_ADC_FLAG_OVR_MST));
+}
+
+/**
+  * @brief  Get flag multimode ADC group regular overrun of the ADC slave 1.
+  * @rmtoll CSR      OVR2           LL_ADC_IsActiveFlag_SLV1_OVR
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV1_OVR(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_OVR_SLV1) == (LL_ADC_FLAG_OVR_SLV1));
+}
+
+/**
+  * @brief  Get flag multimode ADC group regular overrun of the ADC slave 2.
+  * @rmtoll CSR      OVR3           LL_ADC_IsActiveFlag_SLV2_OVR
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV2_OVR(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_OVR_SLV2) == (LL_ADC_FLAG_OVR_SLV2));
+}
+
+
+/**
+  * @brief  Get flag multimode ADC group injected end of sequence conversions of the ADC master.
+  * @rmtoll CSR      JEOC           LL_ADC_IsActiveFlag_MST_JEOS
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_JEOS(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  /* Note: on this STM32 series, there is no flag ADC group injected          */
+  /*       end of unitary conversion.                                         */
+  /*       Flag noted as "JEOC" is corresponding to flag "JEOS"               */
+  /*       in other STM32 families).                                          */
+  return (READ_BIT(ADCxy_COMMON->CSR, ADC_CSR_JEOC1) == (ADC_CSR_JEOC1));
+}
+
+/**
+  * @brief  Get flag multimode ADC group injected end of sequence conversions of the ADC slave 1.
+  * @rmtoll CSR      JEOC2          LL_ADC_IsActiveFlag_SLV1_JEOS
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV1_JEOS(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  /* Note: on this STM32 series, there is no flag ADC group injected          */
+  /*       end of unitary conversion.                                         */
+  /*       Flag noted as "JEOC" is corresponding to flag "JEOS"               */
+  /*       in other STM32 families).                                          */
+  return (READ_BIT(ADCxy_COMMON->CSR, ADC_CSR_JEOC2) == (ADC_CSR_JEOC2));
+}
+
+/**
+  * @brief  Get flag multimode ADC group injected end of sequence conversions of the ADC slave 2.
+  * @rmtoll CSR      JEOC3          LL_ADC_IsActiveFlag_SLV2_JEOS
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV2_JEOS(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  /* Note: on this STM32 series, there is no flag ADC group injected          */
+  /*       end of unitary conversion.                                         */
+  /*       Flag noted as "JEOC" is corresponding to flag "JEOS"               */
+  /*       in other STM32 families).                                          */
+  return (READ_BIT(ADCxy_COMMON->CSR, ADC_CSR_JEOC3) == (ADC_CSR_JEOC3));
+}
+
+/**
+  * @brief  Get flag multimode ADC analog watchdog 1 of the ADC master.
+  * @rmtoll CSR      AWD1           LL_ADC_IsActiveFlag_MST_AWD1
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_AWD1(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD1_MST) == (LL_ADC_FLAG_AWD1_MST));
+}
+
+/**
+  * @brief  Get flag multimode analog watchdog 1 of the ADC slave 1.
+  * @rmtoll CSR      AWD2           LL_ADC_IsActiveFlag_SLV1_AWD1
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV1_AWD1(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD1_SLV1) == (LL_ADC_FLAG_AWD1_SLV1));
+}
+
+/**
+  * @brief  Get flag multimode analog watchdog 1 of the ADC slave 2.
+  * @rmtoll CSR      AWD3           LL_ADC_IsActiveFlag_SLV2_AWD1
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV2_AWD1(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+    return (READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD1_SLV2) == (LL_ADC_FLAG_AWD1_SLV2));
+}
+
+#endif /* ADC_MULTIMODE_SUPPORT */
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_LL_EF_IT_Management ADC IT management
+  * @{
+  */
+
+/**
+  * @brief  Enable interruption ADC group regular end of unitary conversion
+  *         or end of sequence conversions, depending on
+  *         ADC configuration.
+  * @note   To configure flag of end of conversion,
+  *         use function @ref LL_ADC_REG_SetFlagEndOfConversion().
+  * @rmtoll CR1      EOCIE          LL_ADC_EnableIT_EOCS
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_EnableIT_EOCS(ADC_TypeDef *ADCx)
+{
+  SET_BIT(ADCx->CR1, LL_ADC_IT_EOCS);
+}
+
+/**
+  * @brief  Enable ADC group regular interruption overrun.
+  * @rmtoll CR1      OVRIE          LL_ADC_EnableIT_OVR
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_EnableIT_OVR(ADC_TypeDef *ADCx)
+{
+  SET_BIT(ADCx->CR1, LL_ADC_IT_OVR);
+}
+
+
+/**
+  * @brief  Enable interruption ADC group injected end of sequence conversions.
+  * @rmtoll CR1      JEOCIE         LL_ADC_EnableIT_JEOS
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_EnableIT_JEOS(ADC_TypeDef *ADCx)
+{
+  /* Note: on this STM32 series, there is no flag ADC group injected          */
+  /*       end of unitary conversion.                                         */
+  /*       Flag noted as "JEOC" is corresponding to flag "JEOS"               */
+  /*       in other STM32 families).                                          */
+  SET_BIT(ADCx->CR1, LL_ADC_IT_JEOS);
+}
+
+/**
+  * @brief  Enable interruption ADC analog watchdog 1.
+  * @rmtoll CR1      AWDIE          LL_ADC_EnableIT_AWD1
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_EnableIT_AWD1(ADC_TypeDef *ADCx)
+{
+  SET_BIT(ADCx->CR1, LL_ADC_IT_AWD1);
+}
+
+/**
+  * @brief  Disable interruption ADC group regular end of unitary conversion
+  *         or end of sequence conversions, depending on
+  *         ADC configuration.
+  * @note   To configure flag of end of conversion,
+  *         use function @ref LL_ADC_REG_SetFlagEndOfConversion().
+  * @rmtoll CR1      EOCIE          LL_ADC_DisableIT_EOCS
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_DisableIT_EOCS(ADC_TypeDef *ADCx)
+{
+  CLEAR_BIT(ADCx->CR1, LL_ADC_IT_EOCS);
+}
+
+/**
+  * @brief  Disable interruption ADC group regular overrun.
+  * @rmtoll CR1      OVRIE          LL_ADC_DisableIT_OVR
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_DisableIT_OVR(ADC_TypeDef *ADCx)
+{
+  CLEAR_BIT(ADCx->CR1, LL_ADC_IT_OVR);
+}
+
+
+/**
+  * @brief  Disable interruption ADC group injected end of sequence conversions.
+  * @rmtoll CR1      JEOCIE         LL_ADC_EnableIT_JEOS
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_DisableIT_JEOS(ADC_TypeDef *ADCx)
+{
+  /* Note: on this STM32 series, there is no flag ADC group injected          */
+  /*       end of unitary conversion.                                         */
+  /*       Flag noted as "JEOC" is corresponding to flag "JEOS"               */
+  /*       in other STM32 families).                                          */
+  CLEAR_BIT(ADCx->CR1, LL_ADC_IT_JEOS);
+}
+
+/**
+  * @brief  Disable interruption ADC analog watchdog 1.
+  * @rmtoll CR1      AWDIE          LL_ADC_EnableIT_AWD1
+  * @param  ADCx ADC instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_ADC_DisableIT_AWD1(ADC_TypeDef *ADCx)
+{
+  CLEAR_BIT(ADCx->CR1, LL_ADC_IT_AWD1);
+}
+
+/**
+  * @brief  Get state of interruption ADC group regular end of unitary conversion
+  *         or end of sequence conversions, depending on
+  *         ADC configuration.
+  * @note   To configure flag of end of conversion,
+  *         use function @ref LL_ADC_REG_SetFlagEndOfConversion().
+  *         (0: interrupt disabled, 1: interrupt enabled)
+  * @rmtoll CR1      EOCIE          LL_ADC_IsEnabledIT_EOCS
+  * @param  ADCx ADC instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOCS(ADC_TypeDef *ADCx)
+{
+  return (READ_BIT(ADCx->CR1, LL_ADC_IT_EOCS) == (LL_ADC_IT_EOCS));
+}
+
+/**
+  * @brief  Get state of interruption ADC group regular overrun
+  *         (0: interrupt disabled, 1: interrupt enabled).
+  * @rmtoll CR1      OVRIE          LL_ADC_IsEnabledIT_OVR
+  * @param  ADCx ADC instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_OVR(ADC_TypeDef *ADCx)
+{
+  return (READ_BIT(ADCx->CR1, LL_ADC_IT_OVR) == (LL_ADC_IT_OVR));
+}
+
+
+/**
+  * @brief  Get state of interruption ADC group injected end of sequence conversions
+  *         (0: interrupt disabled, 1: interrupt enabled).
+  * @rmtoll CR1      JEOCIE         LL_ADC_EnableIT_JEOS
+  * @param  ADCx ADC instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JEOS(ADC_TypeDef *ADCx)
+{
+  /* Note: on this STM32 series, there is no flag ADC group injected          */
+  /*       end of unitary conversion.                                         */
+  /*       Flag noted as "JEOC" is corresponding to flag "JEOS"               */
+  /*       in other STM32 families).                                          */
+  return (READ_BIT(ADCx->CR1, LL_ADC_IT_JEOS) == (LL_ADC_IT_JEOS));
+}
+
+/**
+  * @brief  Get state of interruption ADC analog watchdog 1
+  *         (0: interrupt disabled, 1: interrupt enabled).
+  * @rmtoll CR1      AWDIE          LL_ADC_EnableIT_AWD1
+  * @param  ADCx ADC instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD1(ADC_TypeDef *ADCx)
+{
+  return (READ_BIT(ADCx->CR1, LL_ADC_IT_AWD1) == (LL_ADC_IT_AWD1));
+}
+
+/**
+  * @}
+  */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup ADC_LL_EF_Init Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization of some features of ADC common parameters and multimode */
+ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON);
+ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct);
+void        LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct);
+
+/* De-initialization of ADC instance, ADC group regular and ADC group injected */
+/* (availability of ADC group injected depends on STM32 families) */
+ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx);
+
+/* Initialization of some features of ADC instance */
+ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct);
+void        LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct);
+
+/* Initialization of some features of ADC instance and ADC group regular */
+ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct);
+void        LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct);
+
+/* Initialization of some features of ADC instance and ADC group injected */
+ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct);
+void        LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct);
+
+/**
+  * @}
+  */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* ADC1 || ADC2 || ADC3 */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_ADC_H */
+

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/LICENSE.txt

@@ -0,0 +1,6 @@
+This software component is provided to you as part of a software package and
+applicable license terms are in the  Package_license file. If you received this
+software component outside of a package or without applicable license terms,
+the terms of the BSD-3-Clause license shall apply. 
+You may obtain a copy of the BSD-3-Clause at:
+https://opensource.org/licenses/BSD-3-Clause

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/License.md

@@ -1,3 +0,0 @@
-# Copyright (c) 2016 STMicroelectronics
-
-This software component is licensed by STMicroelectronics under the **BSD-3-Clause** license. You may not use this file except in compliance with this license. You may obtain a copy of the license [here](https://opensource.org/licenses/BSD-3-Clause).

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c

@@ -5,6 +5,17 @@
   * @brief   HAL module driver.
   *          This is the common part of the HAL initialization
   *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
   @verbatim
   ==============================================================================
                      ##### How to use this driver #####
@@ -19,17 +30,6 @@
 
   @endverbatim
   ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
   */ 
 
 /* Includes ------------------------------------------------------------------*/
@@ -50,11 +50,11 @@
   * @{
   */
 /**
-  * @brief STM32F4xx HAL Driver version number V1.7.10
+  * @brief STM32F4xx HAL Driver version number V1.8.1
   */
 #define __STM32F4xx_HAL_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
-#define __STM32F4xx_HAL_VERSION_SUB1   (0x07U) /*!< [23:16] sub1 version */
-#define __STM32F4xx_HAL_VERSION_SUB2   (0x0AU) /*!< [15:8]  sub2 version */
+#define __STM32F4xx_HAL_VERSION_SUB1   (0x08U) /*!< [23:16] sub1 version */
+#define __STM32F4xx_HAL_VERSION_SUB2   (0x01U) /*!< [15:8]  sub2 version */
 #define __STM32F4xx_HAL_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */ 
 #define __STM32F4xx_HAL_VERSION         ((__STM32F4xx_HAL_VERSION_MAIN << 24U)\
                                         |(__STM32F4xx_HAL_VERSION_SUB1 << 16U)\
@@ -612,4 +612,4 @@ void HAL_DisableMemorySwappingBank(void)
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c

@@ -3,11 +3,22 @@
   * @file    stm32f4xx_hal_adc.c
   * @author  MCD Application Team
   * @brief   This file provides firmware functions to manage the following 
-  *          functionalities of the Analog to Digital Convertor (ADC) peripheral:
+  *          functionalities of the Analog to Digital Converter (ADC) peripheral:
   *           + Initialization and de-initialization functions
-  *           + IO operation functions
-  *           + State and errors functions
-  *         
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
   @verbatim
   ==============================================================================
                     ##### ADC Peripheral features #####
@@ -163,11 +174,11 @@
 
      The compilation flag USE_HAL_ADC_REGISTER_CALLBACKS, when set to 1,
      allows the user to configure dynamically the driver callbacks.
-     Use Functions @ref HAL_ADC_RegisterCallback()
+     Use Functions HAL_ADC_RegisterCallback()
      to register an interrupt callback.
     [..]
 
-     Function @ref HAL_ADC_RegisterCallback() allows to register following callbacks:
+     Function HAL_ADC_RegisterCallback() allows to register following callbacks:
        (+) ConvCpltCallback               : ADC conversion complete callback
        (+) ConvHalfCpltCallback           : ADC conversion DMA half-transfer callback
        (+) LevelOutOfWindowCallback       : ADC analog watchdog 1 callback
@@ -183,11 +194,11 @@
      and a pointer to the user callback function.
     [..]
 
-     Use function @ref HAL_ADC_UnRegisterCallback to reset a callback to the default
+     Use function HAL_ADC_UnRegisterCallback to reset a callback to the default
      weak function.
     [..]
 
-     @ref HAL_ADC_UnRegisterCallback takes as parameters the HAL peripheral handle,
+     HAL_ADC_UnRegisterCallback takes as parameters the HAL peripheral handle,
      and the Callback ID.
      This function allows to reset following callbacks:
        (+) ConvCpltCallback               : ADC conversion complete callback
@@ -203,27 +214,27 @@
        (+) MspDeInitCallback              : ADC Msp DeInit callback
      [..]
 
-     By default, after the @ref HAL_ADC_Init() and when the state is @ref HAL_ADC_STATE_RESET
+     By default, after the HAL_ADC_Init() and when the state is HAL_ADC_STATE_RESET
      all callbacks are set to the corresponding weak functions:
-     examples @ref HAL_ADC_ConvCpltCallback(), @ref HAL_ADC_ErrorCallback().
+     examples HAL_ADC_ConvCpltCallback(), HAL_ADC_ErrorCallback().
      Exception done for MspInit and MspDeInit functions that are
-     reset to the legacy weak functions in the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() only when
+     reset to the legacy weak functions in the HAL_ADC_Init()/ HAL_ADC_DeInit() only when
      these callbacks are null (not registered beforehand).
     [..]
 
-     If MspInit or MspDeInit are not null, the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit()
+     If MspInit or MspDeInit are not null, the HAL_ADC_Init()/ HAL_ADC_DeInit()
      keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state.
      [..]
 
-     Callbacks can be registered/unregistered in @ref HAL_ADC_STATE_READY state only.
+     Callbacks can be registered/unregistered in HAL_ADC_STATE_READY state only.
      Exception done MspInit/MspDeInit functions that can be registered/unregistered
-     in @ref HAL_ADC_STATE_READY or @ref HAL_ADC_STATE_RESET state,
+     in HAL_ADC_STATE_READY or HAL_ADC_STATE_RESET state,
      thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
     [..]
 
      Then, the user first registers the MspInit/MspDeInit user callbacks
-     using @ref HAL_ADC_RegisterCallback() before calling @ref HAL_ADC_DeInit()
-     or @ref HAL_ADC_Init() function.
+     using HAL_ADC_RegisterCallback() before calling HAL_ADC_DeInit()
+     or HAL_ADC_Init() function.
      [..]
 
      When the compilation flag USE_HAL_ADC_REGISTER_CALLBACKS is set to 0 or
@@ -231,18 +242,6 @@
      are set to the corresponding weak functions.
 
     @endverbatim
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
   */ 
 
 /* Includes ------------------------------------------------------------------*/
@@ -814,6 +813,14 @@ HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc)
       }
     }
   }
+  else
+  {
+    /* Update ADC state machine to error */
+    SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+
+    /* Set ADC error code to ADC IP internal error */
+    SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+  }
   
   /* Return function status */
   return HAL_OK;
@@ -905,13 +912,17 @@ HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Ti
     {
       if((Timeout == 0U) || ((HAL_GetTick() - tickstart ) > Timeout))
       {
-        /* Update ADC state machine to timeout */
-        SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
-        
-        /* Process unlocked */
-        __HAL_UNLOCK(hadc);
-        
-        return HAL_TIMEOUT;
+        /* New check to avoid false timeout detection in case of preemption */
+        if(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC)))
+        {
+          /* Update ADC state machine to timeout */
+          SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
+          
+          /* Process unlocked */
+          __HAL_UNLOCK(hadc);
+          
+          return HAL_TIMEOUT;
+        }
       }
     }
   }
@@ -976,13 +987,17 @@ HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventTy
     {
       if((Timeout == 0U) || ((HAL_GetTick() - tickstart ) > Timeout))
       {
-        /* Update ADC state machine to timeout */
-        SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
-        
-        /* Process unlocked */
-        __HAL_UNLOCK(hadc);
-        
-        return HAL_TIMEOUT;
+        /* New check to avoid false timeout detection in case of preemption */
+        if(!(__HAL_ADC_GET_FLAG(hadc,EventType)))
+        {
+          /* Update ADC state machine to timeout */
+          SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
+          
+          /* Process unlocked */
+          __HAL_UNLOCK(hadc);
+          
+          return HAL_TIMEOUT;
+        }
       }
     }
   }
@@ -1122,6 +1137,14 @@ HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc)
       }
     }
   }
+  else
+  {
+    /* Update ADC state machine to error */
+    SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+
+    /* Set ADC error code to ADC IP internal error */
+    SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+  }
   
   /* Return function status */
   return HAL_OK;
@@ -1177,13 +1200,16 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
 {
   uint32_t tmp1 = 0U, tmp2 = 0U;
   
+  uint32_t tmp_sr = hadc->Instance->SR;
+  uint32_t tmp_cr1 = hadc->Instance->CR1;
+
   /* Check the parameters */
   assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
   assert_param(IS_ADC_REGULAR_LENGTH(hadc->Init.NbrOfConversion));
   assert_param(IS_ADC_EOCSelection(hadc->Init.EOCSelection));
   
-  tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC);
-  tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_EOC);
+  tmp1 = tmp_sr & ADC_FLAG_EOC;
+  tmp2 = tmp_cr1 & ADC_IT_EOC;
   /* Check End of conversion flag for regular channels */
   if(tmp1 && tmp2)
   {
@@ -1231,8 +1257,8 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
     __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC);
   }
   
-  tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC);
-  tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_JEOC);                               
+  tmp1 = tmp_sr & ADC_FLAG_JEOC;
+  tmp2 = tmp_cr1 & ADC_IT_JEOC;
   /* Check End of conversion flag for injected channels */
   if(tmp1 && tmp2)
   {
@@ -1278,8 +1304,8 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
     __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JSTRT | ADC_FLAG_JEOC));
   }
   
-  tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD);
-  tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_AWD);                          
+  tmp1 = tmp_sr & ADC_FLAG_AWD;
+  tmp2 = tmp_cr1 & ADC_IT_AWD;
   /* Check Analog watchdog flag */
   if(tmp1 && tmp2)
   {
@@ -1300,8 +1326,8 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
     }
   }
   
-  tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_OVR);
-  tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_OVR);
+  tmp1 = tmp_sr & ADC_FLAG_OVR;
+  tmp2 = tmp_cr1 & ADC_IT_OVR;
   /* Check Overrun flag */
   if(tmp1 && tmp2)
   {
@@ -1364,6 +1390,13 @@ HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, ui
     }
   }
   
+  /* Check ADC DMA Mode                                                     */
+  /* - disable the DMA Mode if it is already enabled                        */
+  if((hadc->Instance->CR2 & ADC_CR2_DMA) == ADC_CR2_DMA)
+  {
+    CLEAR_BIT(hadc->Instance->CR2, ADC_CR2_DMA);
+  }
+  
   /* Start conversion if ADC is effectively enabled */
   if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
   {
@@ -1457,6 +1490,14 @@ HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, ui
       }
     }
   }
+  else
+  {
+    /* Update ADC state machine to error */
+    SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+
+    /* Set ADC error code to ADC IP internal error */
+    SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+  }
   
   /* Return function status */
   return HAL_OK;
@@ -1490,7 +1531,17 @@ HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc)
     
     /* Disable the DMA channel (in case of DMA in circular mode or stop while */
     /* DMA transfer is on going)                                              */
-    tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle);
+    if (hadc->DMA_Handle->State == HAL_DMA_STATE_BUSY)
+    {
+      tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle);
+      
+      /* Check if DMA channel effectively disabled */
+      if (tmp_hal_status != HAL_OK)
+      {
+        /* Update ADC state machine to error */
+        SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA);
+      }
+    }
     
     /* Disable ADC overrun interrupt */
     __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
@@ -1568,7 +1619,7 @@ __weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc)
 /**
   * @brief  Error ADC callback.
   * @note   In case of error due to overrun when using ADC with DMA transfer 
-  *         (HAL ADC handle paramater "ErrorCode" to state "HAL_ADC_ERROR_OVR"):
+  *         (HAL ADC handle parameter "ErrorCode" to state "HAL_ADC_ERROR_OVR"):
   *         - Reinitialize the DMA using function "HAL_ADC_Stop_DMA()".
   *         - If needed, restart a new ADC conversion using function
   *           "HAL_ADC_Start_DMA()"
@@ -1703,7 +1754,7 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConf
     /* Enable the Temperature sensor and VREFINT channel*/
     tmpADC_Common->CCR |= ADC_CCR_TSVREFE;
     
-    if((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR))
+    if(sConfig->Channel == ADC_CHANNEL_TEMPSENSOR)
     {
       /* Delay for temperature sensor stabilization time */
       /* Compute number of CPU cycles to wait for */
@@ -2057,4 +2108,3 @@ static void ADC_DMAError(DMA_HandleTypeDef *hdma)
   * @}
   */ 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c

@@ -6,6 +6,17 @@
   *          functionalities of the ADC extension peripheral:
   *           + Extended features functions
   *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
   @verbatim
   ==============================================================================
                     ##### How to use this driver #####
@@ -69,18 +80,6 @@
 
 
     @endverbatim
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
   */
 
 /* Includes ------------------------------------------------------------------*/
@@ -227,6 +226,14 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc)
       }
     }
   }
+  else
+  {
+    /* Update ADC state machine to error */
+    SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+
+    /* Set ADC error code to ADC IP internal error */
+    SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+  }
   
   /* Return function status */
   return HAL_OK;
@@ -325,6 +332,14 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc)
       }
     }
   }
+  else
+  {
+    /* Update ADC state machine to error */
+    SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+
+    /* Set ADC error code to ADC IP internal error */
+    SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+  }
   
   /* Return function status */
   return HAL_OK;
@@ -411,10 +426,14 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, u
     {
       if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
       {
-        hadc->State= HAL_ADC_STATE_TIMEOUT;
-        /* Process unlocked */
-        __HAL_UNLOCK(hadc);
-        return HAL_TIMEOUT;
+        /* New check to avoid false timeout detection in case of preemption */
+        if(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC)))
+        {
+          hadc->State= HAL_ADC_STATE_TIMEOUT;
+          /* Process unlocked */
+          __HAL_UNLOCK(hadc);
+          return HAL_TIMEOUT;
+        }
       }
     }
   }
@@ -684,6 +703,14 @@ HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t
       hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
     }
   }
+  else
+  {
+    /* Update ADC state machine to error */
+    SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+
+    /* Set ADC error code to ADC IP internal error */
+    SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+  }
   
   /* Return function status */
   return HAL_OK;
@@ -1083,4 +1110,3 @@ static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma)
   * @}
   */ 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c

@@ -68,14 +68,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */
 
@@ -502,4 +500,3 @@ __weak void HAL_SYSTICK_Callback(void)
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c

@@ -83,13 +83,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */ 
@@ -199,12 +198,12 @@ HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
     assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst));
     assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst));
   }
-  
-  /* Allocate lock resource */
-  __HAL_UNLOCK(hdma);
 
   /* Change DMA peripheral state */
   hdma->State = HAL_DMA_STATE_BUSY;
+
+  /* Allocate lock resource */
+  __HAL_UNLOCK(hdma);
   
   /* Disable the peripheral */
   __HAL_DMA_DISABLE(hdma);
@@ -550,12 +549,12 @@ HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
         /* Update error code */
         hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
         
-        /* Process Unlocked */
-        __HAL_UNLOCK(hdma);
-        
         /* Change the DMA state */
         hdma->State = HAL_DMA_STATE_TIMEOUT;
         
+        /* Process Unlocked */
+        __HAL_UNLOCK(hdma);
+        
         return HAL_TIMEOUT;
       }
     }
@@ -563,11 +562,11 @@ HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
     /* Clear all interrupt flags at correct offset within the register */
     regs->IFCR = 0x3FU << hdma->StreamIndex;
     
-    /* Process Unlocked */
-    __HAL_UNLOCK(hdma);
-    
     /* Change the DMA state*/
     hdma->State = HAL_DMA_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hdma);
   }
   return HAL_OK;
 }
@@ -602,7 +601,7 @@ HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma)
   * @param  hdma          pointer to a DMA_HandleTypeDef structure that contains
   *                        the configuration information for the specified DMA Stream.
   * @param  CompleteLevel Specifies the DMA level complete.
-  * @note   The polling mode is kept in this version for legacy. it is recommanded to use the IT model instead.
+  * @note   The polling mode is kept in this version for legacy. it is recommended to use the IT model instead.
   *         This model could be used for debug purpose.
   * @note   The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode). 
   * @param  Timeout       Timeout duration.
@@ -657,13 +656,13 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_Level
       {
         /* Update error code */
         hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
-
-        /* Process Unlocked */
-        __HAL_UNLOCK(hdma);
         
         /* Change the DMA state */
         hdma->State = HAL_DMA_STATE_READY;
         
+        /* Process Unlocked */
+        __HAL_UNLOCK(hdma);
+        
         return HAL_TIMEOUT;
       }
     }
@@ -708,12 +707,12 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_Level
       /* Clear the half transfer and transfer complete flags */
       regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
     
-      /* Process Unlocked */
-      __HAL_UNLOCK(hdma);
-
       /* Change the DMA state */
       hdma->State= HAL_DMA_STATE_READY;
 
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma);
+
       return HAL_ERROR;
    }
   }
@@ -724,10 +723,10 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_Level
     /* Clear the half transfer and transfer complete flags */
     regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
     
+    hdma->State = HAL_DMA_STATE_READY;
+    
     /* Process Unlocked */
     __HAL_UNLOCK(hdma);
-
-    hdma->State = HAL_DMA_STATE_READY;
   }
   else
   {
@@ -863,12 +862,12 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
         /* Clear all interrupt flags at correct offset within the register */
         regs->IFCR = 0x3FU << hdma->StreamIndex;
 
-        /* Process Unlocked */
-        __HAL_UNLOCK(hdma);
-
         /* Change the DMA state */
         hdma->State = HAL_DMA_STATE_READY;
 
+        /* Process Unlocked */
+        __HAL_UNLOCK(hdma);
+
         if(hdma->XferAbortCallback != NULL)
         {
           hdma->XferAbortCallback(hdma);
@@ -905,11 +904,11 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
           /* Disable the transfer complete interrupt */
           hdma->Instance->CR  &= ~(DMA_IT_TC);
 
-          /* Process Unlocked */
-          __HAL_UNLOCK(hdma);
-
           /* Change the DMA state */
           hdma->State = HAL_DMA_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hdma);
         }
 
         if(hdma->XferCpltCallback != NULL)
@@ -940,11 +939,11 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
       }
       while((hdma->Instance->CR & DMA_SxCR_EN) != RESET);
 
-      /* Process Unlocked */
-      __HAL_UNLOCK(hdma);
-
       /* Change the DMA state */
       hdma->State = HAL_DMA_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma);
     }
 
     if(hdma->XferErrorCallback != NULL)
@@ -959,9 +958,9 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
   * @brief  Register callbacks
   * @param  hdma                 pointer to a DMA_HandleTypeDef structure that contains
   *                               the configuration information for the specified DMA Stream.
-  * @param  CallbackID           User Callback identifer
+  * @param  CallbackID           User Callback identifier
   *                               a DMA_HandleTypeDef structure as parameter.
-  * @param  pCallback            pointer to private callbacsk function which has pointer to 
+  * @param  pCallback            pointer to private callback function which has pointer to 
   *                               a DMA_HandleTypeDef structure as parameter.
   * @retval HAL status
   */                      
@@ -1002,6 +1001,8 @@ HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_Call
       break;
 
     default:
+      /* Return error status */
+      status =  HAL_ERROR;
       break;
     }
   }
@@ -1021,7 +1022,7 @@ HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_Call
   * @brief  UnRegister callbacks
   * @param  hdma                 pointer to a DMA_HandleTypeDef structure that contains
   *                               the configuration information for the specified DMA Stream.
-  * @param  CallbackID           User Callback identifer
+  * @param  CallbackID           User Callback identifier
   *                               a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
   * @retval HAL status
   */              
@@ -1302,4 +1303,3 @@ static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma)
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c

@@ -25,13 +25,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -312,4 +311,3 @@ static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddres
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c

@@ -8,6 +8,17 @@
   *           + Initialization and de-initialization functions
   *           + IO operation functions
   *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
   @verbatim
   ==============================================================================
                     ##### EXTI Peripheral features #####
@@ -69,18 +80,6 @@
     (#) Generate software interrupt using HAL_EXTI_GenerateSWI().
 
   @endverbatim
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
   */
 
 /* Includes ------------------------------------------------------------------*/
@@ -276,6 +275,10 @@ HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigT
     pExtiConfig->Mode |= EXTI_MODE_EVENT;
   }
 
+  /* Get default Trigger and GPIOSel configuration */
+  pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
+  pExtiConfig->GPIOSel = 0x00u;
+
   /* 2] Get trigger for configurable lines : rising */
   if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
   {
@@ -284,10 +287,6 @@ HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigT
     {
       pExtiConfig->Trigger = EXTI_TRIGGER_RISING;
     }
-    else
-    {
-      pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
-    }
 
     /* Get falling configuration */
     /* Check if configuration of selected line is enable */
@@ -301,19 +300,9 @@ HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigT
     {
       assert_param(IS_EXTI_GPIO_PIN(linepos));
 
-      regval = SYSCFG->EXTICR[linepos >> 2u];
-      pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24);
+      regval = (SYSCFG->EXTICR[linepos >> 2u] << 16u );
+      pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 28u);
     }
-    else
-    {
-      pExtiConfig->GPIOSel = 0x00u;
-    }
-  }
-  else
-  {
-    /* No Trigger selected */
-    pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
-    pExtiConfig->GPIOSel = 0x00u;
   }
 
   return HAL_OK;
@@ -556,4 +545,3 @@ void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti)
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c

@@ -63,14 +63,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */ 
 
@@ -775,4 +773,3 @@ static void FLASH_SetErrorCode(void)
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c

@@ -34,14 +34,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */ 
 
@@ -172,4 +170,3 @@ __RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void)
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c

@@ -8,6 +8,17 @@
   *           + Initialization and de-initialization functions
   *           + IO operation functions
   *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
   @verbatim
   ==============================================================================
                     ##### GPIO Peripheral features #####
@@ -91,17 +102,6 @@
   
   @endverbatim
   ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
   */ 
 
 /* Includes ------------------------------------------------------------------*/
@@ -123,13 +123,6 @@
 /** @addtogroup GPIO_Private_Constants GPIO Private Constants
   * @{
   */
-#define GPIO_MODE             0x00000003U
-#define EXTI_MODE             0x10000000U
-#define GPIO_MODE_IT          0x00010000U
-#define GPIO_MODE_EVT         0x00020000U
-#define RISING_EDGE           0x00100000U
-#define FALLING_EDGE          0x00200000U
-#define GPIO_OUTPUT_TYPE      0x00000010U
 
 #define GPIO_NUMBER           16U
 /**
@@ -179,7 +172,6 @@ void HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init)
   assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
   assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
   assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
-  assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
 
   /* Configure the port pins */
   for(position = 0U; position < GPIO_NUMBER; position++)
@@ -193,8 +185,8 @@ void HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init)
     {
       /*--------------------- GPIO Mode Configuration ------------------------*/
       /* In case of Output or Alternate function mode selection */
-      if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
-         (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+      if(((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || \
+          (GPIO_Init->Mode & GPIO_MODE) == MODE_AF)
       {
         /* Check the Speed parameter */
         assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
@@ -207,18 +199,24 @@ void HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init)
         /* Configure the IO Output Type */
         temp = GPIOx->OTYPER;
         temp &= ~(GPIO_OTYPER_OT_0 << position) ;
-        temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4U) << position);
+        temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position);
         GPIOx->OTYPER = temp;
        }
 
-      /* Activate the Pull-up or Pull down resistor for the current IO */
-      temp = GPIOx->PUPDR;
-      temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
-      temp |= ((GPIO_Init->Pull) << (position * 2U));
-      GPIOx->PUPDR = temp;
+      if((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG)
+      {
+        /* Check the parameters */
+        assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+        
+        /* Activate the Pull-up or Pull down resistor for the current IO */
+        temp = GPIOx->PUPDR;
+        temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
+        temp |= ((GPIO_Init->Pull) << (position * 2U));
+        GPIOx->PUPDR = temp;
+      }
 
       /* In case of Alternate function mode selection */
-      if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+      if((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)
       {
         /* Check the Alternate function parameter */
         assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
@@ -237,7 +235,7 @@ void HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init)
 
       /*--------------------- EXTI Mode Configuration ------------------------*/
       /* Configure the External Interrupt or event for the current IO */
-      if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+      if((GPIO_Init->Mode & EXTI_MODE) != 0x00U)
       {
         /* Enable SYSCFG Clock */
         __HAL_RCC_SYSCFG_CLK_ENABLE();
@@ -247,39 +245,39 @@ void HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init)
         temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U)));
         SYSCFG->EXTICR[position >> 2U] = temp;
 
-        /* Clear EXTI line configuration */
-        temp = EXTI->IMR;
+        /* Clear Rising Falling edge configuration */
+        temp = EXTI->RTSR;
         temp &= ~((uint32_t)iocurrent);
-        if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+        if((GPIO_Init->Mode & TRIGGER_RISING) != 0x00U)
         {
           temp |= iocurrent;
         }
-        EXTI->IMR = temp;
+        EXTI->RTSR = temp;
 
-        temp = EXTI->EMR;
+        temp = EXTI->FTSR;
         temp &= ~((uint32_t)iocurrent);
-        if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+        if((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00U)
         {
           temp |= iocurrent;
         }
-        EXTI->EMR = temp;
+        EXTI->FTSR = temp;
 
-        /* Clear Rising Falling edge configuration */
-        temp = EXTI->RTSR;
+        temp = EXTI->EMR;
         temp &= ~((uint32_t)iocurrent);
-        if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+        if((GPIO_Init->Mode & EXTI_EVT) != 0x00U)
         {
           temp |= iocurrent;
         }
-        EXTI->RTSR = temp;
+        EXTI->EMR = temp;
 
-        temp = EXTI->FTSR;
+        /* Clear EXTI line configuration */
+        temp = EXTI->IMR;
         temp &= ~((uint32_t)iocurrent);
-        if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+        if((GPIO_Init->Mode & EXTI_IT) != 0x00U)
         {
           temp |= iocurrent;
         }
-        EXTI->FTSR = temp;
+        EXTI->IMR = temp;
       }
     }
   }
@@ -323,8 +321,8 @@ void HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin)
         EXTI->EMR &= ~((uint32_t)iocurrent);
         
         /* Clear Rising Falling edge configuration */
-        EXTI->RTSR &= ~((uint32_t)iocurrent);
         EXTI->FTSR &= ~((uint32_t)iocurrent);
+        EXTI->RTSR &= ~((uint32_t)iocurrent);
 
         /* Configure the External Interrupt or event for the current IO */
         tmp = 0x0FU << (4U * (position & 0x03U));
@@ -434,17 +432,16 @@ void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState Pin
   */
 void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
 {
+  uint32_t odr;
+
   /* Check the parameters */
   assert_param(IS_GPIO_PIN(GPIO_Pin));
 
-  if ((GPIOx->ODR & GPIO_Pin) == GPIO_Pin)
-  {
-    GPIOx->BSRR = (uint32_t)GPIO_Pin << GPIO_NUMBER;
-  }
-  else
-  {
-    GPIOx->BSRR = GPIO_Pin;
-  }
+  /* get current Output Data Register value */
+  odr = GPIOx->ODR;
+
+  /* Set selected pins that were at low level, and reset ones that were high */
+  GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin);
 }
 
 /**
@@ -534,4 +531,3 @@ __weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c

@@ -7,6 +7,17 @@
   *          functionalities of I2C extension peripheral:
   *           + Extension features functions
   *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
   @verbatim
   ==============================================================================
                ##### I2C peripheral extension features  #####
@@ -25,18 +36,6 @@
     (#) Configure I2C Digital noise filter using the function HAL_I2C_DigitalFilter_Config()
 
   @endverbatim
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
   */
 
 /* Includes ------------------------------------------------------------------*/
@@ -181,4 +180,3 @@ HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c

@@ -11,14 +11,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */ 
 
@@ -100,11 +98,19 @@ void HAL_PWR_DeInit(void)
   *         backup data registers and backup SRAM).
   * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the 
   *         Backup Domain Access should be kept enabled.
+  * @note The following sequence is required to bypass the delay between
+  *         DBP bit programming and the effective enabling  of the backup domain.
+  *         Please check the Errata Sheet for more details under "Possible delay
+  *         in backup domain protection disabling/enabling after programming the
+  *         DBP bit" section.
   * @retval None
   */
 void HAL_PWR_EnableBkUpAccess(void)
 {
+  __IO uint32_t dummyread;
   *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE;
+  dummyread = PWR->CR;
+  UNUSED(dummyread);
 }
 
 /**
@@ -112,11 +118,19 @@ void HAL_PWR_EnableBkUpAccess(void)
   *         backup data registers and backup SRAM).
   * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the 
   *         Backup Domain Access should be kept enabled.
+  * @note The following sequence is required to bypass the delay between
+  *         DBP bit programming and the effective disabling  of the backup domain.
+  *         Please check the Errata Sheet for more details under "Possible delay
+  *         in backup domain protection disabling/enabling after programming the
+  *         DBP bit" section.
   * @retval None
   */
 void HAL_PWR_DisableBkUpAccess(void)
 {
+  __IO uint32_t dummyread;
   *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE;
+  dummyread = PWR->CR;
+  UNUSED(dummyread);
 }
 
 /**
@@ -555,5 +569,3 @@ void HAL_PWR_DisableSEVOnPend(void)
 /**
   * @}
   */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c

@@ -10,14 +10,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */ 
 
@@ -600,5 +598,3 @@ HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t
 /**
   * @}
   */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c

@@ -54,14 +54,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */
 
@@ -540,11 +538,22 @@ __weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruc
       {
         /* Do not return HAL_ERROR if request repeats the current configuration */
         pll_config = RCC->PLLCFGR;
-        if((READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) ||
-           (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != RCC_OscInitStruct->PLL.PLLM) ||
-           (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != RCC_OscInitStruct->PLL.PLLN) ||
-           (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != RCC_OscInitStruct->PLL.PLLP) ||
-           (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != RCC_OscInitStruct->PLL.PLLQ))
+#if defined (RCC_PLLCFGR_PLLR)
+        if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos)))
+#else
+        if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)))
+#endif
         {
           return HAL_ERROR;
         }
@@ -1111,4 +1120,3 @@ __weak void HAL_RCC_CSSCallback(void)
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c

@@ -10,14 +10,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */
 
@@ -3334,7 +3332,13 @@ HAL_StatusTypeDef HAL_RCC_DeInit(void)
   */
 HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
 {
-  uint32_t tickstart = 0U;
+  uint32_t tickstart, pll_config;
+
+  /* Check Null pointer */
+  if(RCC_OscInitStruct == NULL)
+  {
+    return HAL_ERROR;
+  }
 
   /* Check the parameters */
   assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
@@ -3612,13 +3616,12 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
         }
 
         /* Configure the main PLL clock source, multiplication and division factors. */
-        __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
-                             RCC_OscInitStruct->PLL.PLLM,
-                             RCC_OscInitStruct->PLL.PLLN,
-                             RCC_OscInitStruct->PLL.PLLP,
-                             RCC_OscInitStruct->PLL.PLLQ,
-                             RCC_OscInitStruct->PLL.PLLR);
-
+        WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource                                            | \
+                                 RCC_OscInitStruct->PLL.PLLM                                                 | \
+                                 (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos)                       | \
+                                 (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos)        | \
+                                 (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)                       | \
+                                 (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos)));
         /* Enable the main PLL. */
         __HAL_RCC_PLL_ENABLE();
 
@@ -3654,7 +3657,35 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
     }
     else
     {
-      return HAL_ERROR;
+      /* Check if there is a request to disable the PLL used as System clock source */
+      if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Do not return HAL_ERROR if request repeats the current configuration */
+        pll_config = RCC->PLLCFGR;
+#if defined (RCC_PLLCFGR_PLLR)
+        if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos)))
+#else
+        if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) ||
+            (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)))
+#endif
+        {
+          return HAL_ERROR;
+        }
+      }
     }
   }
   return HAL_OK;
@@ -3751,4 +3782,3 @@ void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c

@@ -1,1842 +1,1896 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_rtc.c
-  * @author  MCD Application Team
-  * @brief   RTC HAL module driver.
-  *          This file provides firmware functions to manage the following
-  *          functionalities of the Real Time Clock (RTC) peripheral:
-  *           + Initialization and de-initialization functions
-  *           + RTC Time and Date functions
-  *           + RTC Alarm functions
-  *           + Peripheral Control functions
-  *           + Peripheral State functions
-  *
-  @verbatim
-  ==============================================================================
-              ##### Backup Domain Operating Condition #####
-  ==============================================================================
-  [..] The real-time clock (RTC), the RTC backup registers, and the backup
-       SRAM (BKP SRAM) can be powered from the VBAT voltage when the main
-       VDD supply is powered off.
-       To retain the content of the RTC backup registers, backup SRAM, and supply
-       the RTC when VDD is turned off, VBAT pin can be connected to an optional
-       standby voltage supplied by a battery or by another source.
-
-  [..] To allow the RTC operating even when the main digital supply (VDD) is turned
-       off, the VBAT pin powers the following blocks:
-    (#) The RTC
-    (#) The LSE oscillator
-    (#) The backup SRAM when the low power backup regulator is enabled
-    (#) PC13 to PC15 I/Os, plus PI8 I/O (when available)
-
-  [..] When the backup domain is supplied by VDD (analog switch connected to VDD),
-       the following pins are available:
-    (#) PC14 and PC15 can be used as either GPIO or LSE pins
-    (#) PC13 can be used as a GPIO or as the RTC_AF1 pin
-    (#) PI8 can be used as a GPIO or as the RTC_AF2 pin
-
-  [..] When the backup domain is supplied by VBAT (analog switch connected to VBAT
-       because VDD is not present), the following pins are available:
-    (#) PC14 and PC15 can be used as LSE pins only
-    (#) PC13 can be used as the RTC_AF1 pin
-    (#) PI8 can be used as the RTC_AF2 pin
-
-                   ##### Backup Domain Reset #####
-  ==================================================================
-  [..] The backup domain reset sets all RTC registers and the RCC_BDCR register
-       to their reset values. The BKPSRAM is not affected by this reset. The only
-       way to reset the BKPSRAM is through the Flash interface by requesting
-       a protection level change from 1 to 0.
-  [..] A backup domain reset is generated when one of the following events occurs:
-    (#) Software reset, triggered by setting the BDRST bit in the
-        RCC Backup domain control register (RCC_BDCR).
-    (#) VDD or VBAT power on, if both supplies have previously been powered off.
-
-                   ##### Backup Domain Access #####
-  ==================================================================
-  [..] After reset, the backup domain (RTC registers, RTC backup data
-       registers and backup SRAM) is protected against possible unwanted write
-       accesses.
-  [..] To enable access to the RTC Domain and RTC registers, proceed as follows:
-    (+) Enable the Power Controller (PWR) APB1 interface clock using the
-        __HAL_RCC_PWR_CLK_ENABLE() function.
-    (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
-    (+) Select the RTC clock source using the __HAL_RCC_RTC_CONFIG() function.
-    (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() function.
-
-
-                  ##### How to use this driver #####
-  ==================================================================
-  [..]
-    (+) Enable the RTC domain access (see description in the section above).
-    (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
-        format using the HAL_RTC_Init() function.
-
-  *** Time and Date configuration ***
-  ===================================
-  [..]
-    (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime()
-        and HAL_RTC_SetDate() functions.
-    (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions.
-
-  *** Alarm configuration ***
-  ===========================
-  [..]
-    (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function.
-        You can also configure the RTC Alarm with interrupt mode using the HAL_RTC_SetAlarm_IT() function.
-    (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function.
-
-                  ##### RTC and low power modes #####
-  ==================================================================
-  [..] The MCU can be woken up from a low power mode by an RTC alternate
-       function.
-  [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B),
-       RTC wake-up, RTC tamper event detection and RTC time stamp event detection.
-       These RTC alternate functions can wake up the system from the Stop and
-       Standby low power modes.
-  [..] The system can also wake up from low power modes without depending
-       on an external interrupt (Auto-wake-up mode), by using the RTC alarm
-       or the RTC wake-up events.
-  [..] The RTC provides a programmable time base for waking up from the
-       Stop or Standby mode at regular intervals.
-       Wake-up from STOP and STANDBY modes is possible only when the RTC clock source
-       is LSE or LSI.
-
-  *** Callback registration ***
-  =============================================
-
-  [..]
-  The compilation define  USE_HAL_RTC_REGISTER_CALLBACKS when set to 1
-  allows the user to configure dynamically the driver callbacks.
-  Use Function @ref HAL_RTC_RegisterCallback() to register an interrupt callback.
-
-  [..]
-  Function @ref HAL_RTC_RegisterCallback() allows to register following callbacks:
-    (+) AlarmAEventCallback          : RTC Alarm A Event callback.
-    (+) AlarmBEventCallback          : RTC Alarm B Event callback.
-    (+) TimeStampEventCallback       : RTC TimeStamp Event callback.
-    (+) WakeUpTimerEventCallback     : RTC WakeUpTimer Event callback.
-    (+) Tamper1EventCallback         : RTC Tamper 1 Event callback.
-    (+) Tamper2EventCallback         : RTC Tamper 2 Event callback.
-    (+) MspInitCallback              : RTC MspInit callback.
-    (+) MspDeInitCallback            : RTC MspDeInit callback.
-  [..]
-  This function takes as parameters the HAL peripheral handle, the Callback ID
-  and a pointer to the user callback function.
-
-  [..]
-  Use function @ref HAL_RTC_UnRegisterCallback() to reset a callback to the default
-  weak function.
-  @ref HAL_RTC_UnRegisterCallback() takes as parameters the HAL peripheral handle,
-  and the Callback ID.
-  This function allows to reset following callbacks:
-    (+) AlarmAEventCallback          : RTC Alarm A Event callback.
-    (+) AlarmBEventCallback          : RTC Alarm B Event callback.
-    (+) TimeStampEventCallback       : RTC TimeStamp Event callback.
-    (+) WakeUpTimerEventCallback     : RTC WakeUpTimer Event callback.
-    (+) Tamper1EventCallback         : RTC Tamper 1 Event callback.
-    (+) Tamper2EventCallback         : RTC Tamper 2 Event callback.
-    (+) MspInitCallback              : RTC MspInit callback.
-    (+) MspDeInitCallback            : RTC MspDeInit callback.
-
-  [..]
-  By default, after the @ref HAL_RTC_Init() and when the state is HAL_RTC_STATE_RESET,
-  all callbacks are set to the corresponding weak functions :
-  examples @ref AlarmAEventCallback(), @ref WakeUpTimerEventCallback().
-  Exception done for MspInit and MspDeInit callbacks that are reset to the legacy weak function
-  in the @ref HAL_RTC_Init()/@ref HAL_RTC_DeInit() only when these callbacks are null
-  (not registered beforehand).
-  If not, MspInit or MspDeInit are not null, @ref HAL_RTC_Init()/@ref HAL_RTC_DeInit()
-  keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
-
-  [..]
-  Callbacks can be registered/unregistered in HAL_RTC_STATE_READY state only.
-  Exception done MspInit/MspDeInit that can be registered/unregistered
-  in HAL_RTC_STATE_READY or HAL_RTC_STATE_RESET state,
-  thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
-  In that case first register the MspInit/MspDeInit user callbacks
-  using @ref HAL_RTC_RegisterCallback() before calling @ref HAL_RTC_DeInit()
-  or @ref HAL_RTC_Init() function.
-
-  [..]
-  When The compilation define USE_HAL_RTC_REGISTER_CALLBACKS is set to 0 or
-  not defined, the callback registration feature is not available and all callbacks
-  are set to the corresponding weak functions.
-   @endverbatim
-
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
-  * @{
-  */
-
-/** @defgroup RTC RTC
-  * @brief RTC HAL module driver
-  * @{
-  */
-
-#ifdef HAL_RTC_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup RTC_Exported_Functions RTC Exported Functions
-  * @{
-  */
-
-/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions
- *  @brief    Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
-              ##### Initialization and de-initialization functions #####
- ===============================================================================
-   [..] This section provides functions allowing to initialize and configure the
-         RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable
-         RTC registers Write protection, enter and exit the RTC initialization mode,
-         RTC registers synchronization check and reference clock detection enable.
-         (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base.
-             It is split into 2 programmable prescalers to minimize power consumption.
-             (++) A 7-bit asynchronous prescaler and a 13-bit synchronous prescaler.
-             (++) When both prescalers are used, it is recommended to configure the
-                 asynchronous prescaler to a high value to minimize power consumption.
-         (#) All RTC registers are Write protected. Writing to the RTC registers
-             is enabled by writing a key into the Write Protection register, RTC_WPR.
-         (#) To configure the RTC Calendar, user application should enter
-             initialization mode. In this mode, the calendar counter is stopped
-             and its value can be updated. When the initialization sequence is
-             complete, the calendar restarts counting after 4 RTCCLK cycles.
-         (#) To read the calendar through the shadow registers after Calendar
-             initialization, calendar update or after wake-up from low power modes
-             the software must first clear the RSF flag. The software must then
-             wait until it is set again before reading the calendar, which means
-             that the calendar registers have been correctly copied into the
-             RTC_TR and RTC_DR shadow registers.The HAL_RTC_WaitForSynchro() function
-             implements the above software sequence (RSF clear and RSF check).
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Initializes the RTC peripheral
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc)
-{
-  /* Check the RTC peripheral state */
-  if(hrtc == NULL)
-  {
-     return HAL_ERROR;
-  }
-
-  /* Check the parameters */
-  assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat));
-  assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv));
-  assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv));
-  assert_param (IS_RTC_OUTPUT(hrtc->Init.OutPut));
-  assert_param (IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity));
-  assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType));
-
-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-  if(hrtc->State == HAL_RTC_STATE_RESET)
-  {
-    /* Allocate lock resource and initialize it */
-    hrtc->Lock = HAL_UNLOCKED;
-
-    hrtc->AlarmAEventCallback          =  HAL_RTC_AlarmAEventCallback;        /* Legacy weak AlarmAEventCallback      */
-    hrtc->AlarmBEventCallback          =  HAL_RTCEx_AlarmBEventCallback;      /* Legacy weak AlarmBEventCallback      */
-    hrtc->TimeStampEventCallback       =  HAL_RTCEx_TimeStampEventCallback;   /* Legacy weak TimeStampEventCallback   */
-    hrtc->WakeUpTimerEventCallback     =  HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */
-    hrtc->Tamper1EventCallback         =  HAL_RTCEx_Tamper1EventCallback;     /* Legacy weak Tamper1EventCallback     */
-    hrtc->Tamper2EventCallback         =  HAL_RTCEx_Tamper2EventCallback;     /* Legacy weak Tamper2EventCallback     */
-
-    if(hrtc->MspInitCallback == NULL)
-    {
-      hrtc->MspInitCallback = HAL_RTC_MspInit;
-    }
-    /* Init the low level hardware */
-    hrtc->MspInitCallback(hrtc);
-
-    if(hrtc->MspDeInitCallback == NULL)
-    {
-      hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
-    }
-  }
-#else
-  if(hrtc->State == HAL_RTC_STATE_RESET)
-  {
-    /* Allocate lock resource and initialize it */
-    hrtc->Lock = HAL_UNLOCKED;
-
-    /* Initialize RTC MSP */
-    HAL_RTC_MspInit(hrtc);
-  }
-#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */
-
-  /* Set RTC state */
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Set Initialization mode */
-  if(RTC_EnterInitMode(hrtc) != HAL_OK)
-  {
-    /* Enable the write protection for RTC registers */
-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-    /* Set RTC state */
-    hrtc->State = HAL_RTC_STATE_ERROR;
-
-    return HAL_ERROR;
-  }
-  else
-  {
-    /* Clear RTC_CR FMT, OSEL and POL Bits */
-    hrtc->Instance->CR &= ((uint32_t)~(RTC_CR_FMT | RTC_CR_OSEL | RTC_CR_POL));
-    /* Set RTC_CR register */
-    hrtc->Instance->CR |= (uint32_t)(hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity);
-
-    /* Configure the RTC PRER */
-    hrtc->Instance->PRER = (uint32_t)(hrtc->Init.SynchPrediv);
-    hrtc->Instance->PRER |= (uint32_t)(hrtc->Init.AsynchPrediv << 16U);
-
-    /* Exit Initialization mode */
-    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
-
-    /* If  CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
-    if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
-    {
-      if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        hrtc->State = HAL_RTC_STATE_ERROR;
-
-        return HAL_ERROR;
-      }
-    }
-
-    hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_ALARMOUTTYPE;
-    hrtc->Instance->TAFCR |= (uint32_t)(hrtc->Init.OutPutType);
-
-    /* Enable the write protection for RTC registers */
-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-    /* Set RTC state */
-    hrtc->State = HAL_RTC_STATE_READY;
-
-    return HAL_OK;
-  }
-}
-
-/**
-  * @brief  DeInitializes the RTC peripheral
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @note   This function doesn't reset the RTC Backup Data registers.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc)
-{
-  uint32_t tickstart = 0U;
-
-  /* Set RTC state */
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Set Initialization mode */
-  if(RTC_EnterInitMode(hrtc) != HAL_OK)
-  {
-    /* Enable the write protection for RTC registers */
-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-    /* Set RTC state */
-    hrtc->State = HAL_RTC_STATE_ERROR;
-
-    return HAL_ERROR;
-  }
-  else
-  {
-    /* Reset TR, DR and CR registers */
-    hrtc->Instance->TR = 0x00000000U;
-    hrtc->Instance->DR = 0x00002101U;
-    /* Reset All CR bits except CR[2:0] */
-    hrtc->Instance->CR &= 0x00000007U;
-
-    /* Get tick */
-    tickstart = HAL_GetTick();
-
-    /* Wait till WUTWF flag is set and if Time out is reached exit */
-    while(((hrtc->Instance->ISR) & RTC_ISR_WUTWF) == (uint32_t)RESET)
-    {
-      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        /* Set RTC state */
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-        return HAL_TIMEOUT;
-      }
-    }
-
-    /* Reset all RTC CR register bits */
-    hrtc->Instance->CR &= 0x00000000U;
-    hrtc->Instance->WUTR = 0x0000FFFFU;
-    hrtc->Instance->PRER = 0x007F00FFU;
-    hrtc->Instance->CALIBR = 0x00000000U;
-    hrtc->Instance->ALRMAR = 0x00000000U;
-    hrtc->Instance->ALRMBR = 0x00000000U;
-    hrtc->Instance->SHIFTR = 0x00000000U;
-    hrtc->Instance->CALR = 0x00000000U;
-    hrtc->Instance->ALRMASSR = 0x00000000U;
-    hrtc->Instance->ALRMBSSR = 0x00000000U;
-
-    /* Reset ISR register and exit initialization mode */
-    hrtc->Instance->ISR = 0x00000000U;
-
-    /* Reset Tamper and alternate functions configuration register */
-    hrtc->Instance->TAFCR = 0x00000000U;
-
-    /* If  RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
-    if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
-    {
-      if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        hrtc->State = HAL_RTC_STATE_ERROR;
-
-        return HAL_ERROR;
-      }
-    }
-  }
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-  if(hrtc->MspDeInitCallback == NULL)
-  {
-    hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
-  }
-
-  /* DeInit the low level hardware: CLOCK, NVIC.*/
-  hrtc->MspDeInitCallback(hrtc);
-
-#else
-  /* De-Initialize RTC MSP */
-  HAL_RTC_MspDeInit(hrtc);
-#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */
-
-  hrtc->State = HAL_RTC_STATE_RESET;
-
-  /* Release Lock */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-/**
-  * @brief  Register a User RTC Callback
-  *         To be used instead of the weak predefined callback
-  * @param  hrtc RTC handle
-  * @param  CallbackID ID of the callback to be registered
-  *         This parameter can be one of the following values:
-  *          @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID          Alarm A Event Callback ID
-  *          @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID          Alarm B Event Callback ID
-  *          @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID        TimeStamp Event Callback ID
-  *          @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID      Wake-Up Timer Event Callback ID
-  *          @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID          Tamper 1 Callback ID
-  *          @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID          Tamper 2 Callback ID
-  *          @arg @ref HAL_RTC_MSPINIT_CB_ID                Msp Init callback ID
-  *          @arg @ref HAL_RTC_MSPDEINIT_CB_ID              Msp DeInit callback ID
-  * @param  pCallback pointer to the Callback function
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback)
-{
-  HAL_StatusTypeDef status = HAL_OK;
-
-  if(pCallback == NULL)
-  {
-    return HAL_ERROR;
-  }
-
-  /* Process locked */
-  __HAL_LOCK(hrtc);
-
-  if(HAL_RTC_STATE_READY == hrtc->State)
-  {
-    switch (CallbackID)
-    {
-    case HAL_RTC_ALARM_A_EVENT_CB_ID :
-      hrtc->AlarmAEventCallback = pCallback;
-      break;
-
-    case HAL_RTC_ALARM_B_EVENT_CB_ID :
-      hrtc->AlarmBEventCallback = pCallback;
-      break;
-
-    case HAL_RTC_TIMESTAMP_EVENT_CB_ID :
-      hrtc->TimeStampEventCallback = pCallback;
-      break;
-
-    case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID :
-      hrtc->WakeUpTimerEventCallback = pCallback;
-      break;
-
-    case HAL_RTC_TAMPER1_EVENT_CB_ID :
-      hrtc->Tamper1EventCallback = pCallback;
-      break;
-
-    case HAL_RTC_TAMPER2_EVENT_CB_ID :
-      hrtc->Tamper2EventCallback = pCallback;
-      break;
-
-   case HAL_RTC_MSPINIT_CB_ID :
-      hrtc->MspInitCallback = pCallback;
-      break;
-
-   case HAL_RTC_MSPDEINIT_CB_ID :
-      hrtc->MspDeInitCallback = pCallback;
-      break;
-
-    default :
-     /* Return error status */
-      status =  HAL_ERROR;
-      break;
-    }
-  }
-  else if(HAL_RTC_STATE_RESET == hrtc->State)
-  {
-    switch (CallbackID)
-    {
-    case HAL_RTC_MSPINIT_CB_ID :
-      hrtc->MspInitCallback = pCallback;
-      break;
-
-   case HAL_RTC_MSPDEINIT_CB_ID :
-      hrtc->MspDeInitCallback = pCallback;
-      break;
-
-    default :
-     /* Return error status */
-      status =  HAL_ERROR;
-      break;
-    }
-  }
-  else
-  {
-    /* Return error status */
-    status =  HAL_ERROR;
-  }
-
-  /* Release Lock */
-  __HAL_UNLOCK(hrtc);
-
-  return status;
-}
-
-/**
-  * @brief  Unregister an RTC Callback
-  *         RTC callabck is redirected to the weak predefined callback
-  * @param  hrtc RTC handle
-  * @param  CallbackID ID of the callback to be unregistered
-  *         This parameter can be one of the following values:
-  *          @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID          Alarm A Event Callback ID
-  *          @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID          Alarm B Event Callback ID
-  *          @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID        TimeStamp Event Callback ID
-  *          @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID      Wake-Up Timer Event Callback ID
-  *          @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID          Tamper 1 Callback ID
-  *          @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID          Tamper 2 Callback ID
-  *          @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID
-  *          @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID)
-{
-  HAL_StatusTypeDef status = HAL_OK;
-
-  /* Process locked */
-  __HAL_LOCK(hrtc);
-
-  if(HAL_RTC_STATE_READY == hrtc->State)
-  {
-    switch (CallbackID)
-    {
-    case HAL_RTC_ALARM_A_EVENT_CB_ID :
-      hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback;         /* Legacy weak AlarmAEventCallback    */
-      break;
-
-    case HAL_RTC_ALARM_B_EVENT_CB_ID :
-      hrtc->AlarmBEventCallback = HAL_RTCEx_AlarmBEventCallback;          /* Legacy weak AlarmBEventCallback */
-      break;
-
-    case HAL_RTC_TIMESTAMP_EVENT_CB_ID :
-      hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback;    /* Legacy weak TimeStampEventCallback    */
-      break;
-
-    case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID :
-      hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */
-      break;
-
-    case HAL_RTC_TAMPER1_EVENT_CB_ID :
-      hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback;         /* Legacy weak Tamper1EventCallback   */
-      break;
-
-    case HAL_RTC_TAMPER2_EVENT_CB_ID :
-      hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback;         /* Legacy weak Tamper2EventCallback         */
-      break;
-
-    case HAL_RTC_MSPINIT_CB_ID :
-      hrtc->MspInitCallback = HAL_RTC_MspInit;
-      break;
-
-    case HAL_RTC_MSPDEINIT_CB_ID :
-      hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
-      break;
-
-    default :
-     /* Return error status */
-      status =  HAL_ERROR;
-      break;
-    }
-  }
-  else if(HAL_RTC_STATE_RESET == hrtc->State)
-  {
-    switch (CallbackID)
-    {
-    case HAL_RTC_MSPINIT_CB_ID :
-      hrtc->MspInitCallback = HAL_RTC_MspInit;
-      break;
-
-    case HAL_RTC_MSPDEINIT_CB_ID :
-      hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
-      break;
-
-    default :
-     /* Return error status */
-      status =  HAL_ERROR;
-      break;
-    }
-  }
-  else
-  {
-    /* Return error status */
-    status =  HAL_ERROR;
-  }
-
-  /* Release Lock */
-  __HAL_UNLOCK(hrtc);
-
-  return status;
-}
-#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
-
-/**
-  * @brief  Initializes the RTC MSP.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval None
-  */
-__weak void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
-{
-  /* Prevent unused argument(s) compilation warning */
-  UNUSED(hrtc);
-  /* NOTE : This function Should not be modified, when the callback is needed,
-            the HAL_RTC_MspInit could be implemented in the user file
-   */
-}
-
-/**
-  * @brief  DeInitializes the RTC MSP.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval None
-  */
-__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
-{
-  /* Prevent unused argument(s) compilation warning */
-  UNUSED(hrtc);
-  /* NOTE : This function Should not be modified, when the callback is needed,
-            the HAL_RTC_MspDeInit could be implemented in the user file
-   */
-}
-
-/**
-  * @}
-  */
-
-/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions
- *  @brief   RTC Time and Date functions
- *
-@verbatim
- ===============================================================================
-                 ##### RTC Time and Date functions #####
- ===============================================================================
-
- [..] This section provides functions allowing to configure Time and Date features
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Sets RTC current time.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  sTime Pointer to Time structure
-  * @param  Format Specifies the format of the entered parameters.
-  *          This parameter can be one of the following values:
-  *            @arg RTC_FORMAT_BIN: Binary data format
-  *            @arg RTC_FORMAT_BCD: BCD data format
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
-{
-  uint32_t tmpreg = 0U;
-
- /* Check the parameters */
-  assert_param(IS_RTC_FORMAT(Format));
-  assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving));
-  assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  if(Format == RTC_FORMAT_BIN)
-  {
-    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
-    {
-      assert_param(IS_RTC_HOUR12(sTime->Hours));
-      assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
-    }
-    else
-    {
-      sTime->TimeFormat = 0x00U;
-      assert_param(IS_RTC_HOUR24(sTime->Hours));
-    }
-    assert_param(IS_RTC_MINUTES(sTime->Minutes));
-    assert_param(IS_RTC_SECONDS(sTime->Seconds));
-
-    tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(sTime->Hours) << 16U) | \
-                        ((uint32_t)RTC_ByteToBcd2(sTime->Minutes) << 8U) | \
-                        ((uint32_t)RTC_ByteToBcd2(sTime->Seconds)) | \
-                        (((uint32_t)sTime->TimeFormat) << 16U));
-  }
-  else
-  {
-    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
-    {
-      assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sTime->Hours)));
-      assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
-    }
-    else
-    {
-      sTime->TimeFormat = 0x00U;
-      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours)));
-    }
-    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes)));
-    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds)));
-    tmpreg = (((uint32_t)(sTime->Hours) << 16U) | \
-              ((uint32_t)(sTime->Minutes) << 8U) | \
-              ((uint32_t)sTime->Seconds) | \
-              ((uint32_t)(sTime->TimeFormat) << 16U));
-  }
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Set Initialization mode */
-  if(RTC_EnterInitMode(hrtc) != HAL_OK)
-  {
-    /* Enable the write protection for RTC registers */
-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-    /* Set RTC state */
-    hrtc->State = HAL_RTC_STATE_ERROR;
-
-    /* Process Unlocked */
-    __HAL_UNLOCK(hrtc);
-
-    return HAL_ERROR;
-  }
-  else
-  {
-    /* Set the RTC_TR register */
-    hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK);
-
-    /* Clear the bits to be configured */
-    hrtc->Instance->CR &= (uint32_t)~RTC_CR_BCK;
-
-    /* Configure the RTC_CR register */
-    hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation);
-
-    /* Exit Initialization mode */
-    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
-
-    /* If  CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
-    if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
-    {
-      if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        hrtc->State = HAL_RTC_STATE_ERROR;
-
-        /* Process Unlocked */
-        __HAL_UNLOCK(hrtc);
-
-        return HAL_ERROR;
-      }
-    }
-
-    /* Enable the write protection for RTC registers */
-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-   hrtc->State = HAL_RTC_STATE_READY;
-
-   __HAL_UNLOCK(hrtc);
-
-   return HAL_OK;
-  }
-}
-
-/**
-  * @brief  Gets RTC current time.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  sTime Pointer to Time structure
-  * @param  Format Specifies the format of the entered parameters.
-  *          This parameter can be one of the following values:
-  *            @arg RTC_FORMAT_BIN: Binary data format
-  *            @arg RTC_FORMAT_BCD: BCD data format
-  * @note  You can use SubSeconds and SecondFraction (sTime structure fields returned) to convert SubSeconds
-  *        value in second fraction ratio with time unit following generic formula:
-  *        Second fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit
-  *        This conversion can be performed only if no shift operation is pending (ie. SHFP=0) when PREDIV_S >= SS
-  * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values
-  *        in the higher-order calendar shadow registers to ensure consistency between the time and date values.
-  *        Reading RTC current time locks the values in calendar shadow registers until current date is read.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
-{
-  uint32_t tmpreg = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_FORMAT(Format));
-
-  /* Get subseconds structure field from the corresponding register */
-  sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR);
-
-  /* Get SecondFraction structure field from the corresponding register field*/
-  sTime->SecondFraction = (uint32_t)(hrtc->Instance->PRER & RTC_PRER_PREDIV_S);
-
-  /* Get the TR register */
-  tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK);
-
-  /* Fill the structure fields with the read parameters */
-  sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> 16U);
-  sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >> 8U);
-  sTime->Seconds = (uint8_t)(tmpreg & (RTC_TR_ST | RTC_TR_SU));
-  sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> 16U);
-
-  /* Check the input parameters format */
-  if(Format == RTC_FORMAT_BIN)
-  {
-    /* Convert the time structure parameters to Binary format */
-    sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours);
-    sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes);
-    sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds);
-  }
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Sets RTC current date.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  sDate Pointer to date structure
-  * @param  Format specifies the format of the entered parameters.
-  *          This parameter can be one of the following values:
-  *            @arg RTC_FORMAT_BIN: Binary data format
-  *            @arg RTC_FORMAT_BCD: BCD data format
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
-{
-  uint32_t datetmpreg = 0U;
-
- /* Check the parameters */
-  assert_param(IS_RTC_FORMAT(Format));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  if((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10U) == 0x10U))
-  {
-    sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10U)) + (uint8_t)0x0AU);
-  }
-
-  assert_param(IS_RTC_WEEKDAY(sDate->WeekDay));
-
-  if(Format == RTC_FORMAT_BIN)
-  {
-    assert_param(IS_RTC_YEAR(sDate->Year));
-    assert_param(IS_RTC_MONTH(sDate->Month));
-    assert_param(IS_RTC_DATE(sDate->Date));
-
-   datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << 16U) | \
-                 ((uint32_t)RTC_ByteToBcd2(sDate->Month) << 8U) | \
-                 ((uint32_t)RTC_ByteToBcd2(sDate->Date)) | \
-                 ((uint32_t)sDate->WeekDay << 13U));
-  }
-  else
-  {
-    assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year)));
-    assert_param(IS_RTC_MONTH(RTC_Bcd2ToByte(sDate->Month)));
-    assert_param(IS_RTC_DATE(RTC_Bcd2ToByte(sDate->Date)));
-
-    datetmpreg = ((((uint32_t)sDate->Year) << 16U) | \
-                  (((uint32_t)sDate->Month) << 8U) | \
-                  ((uint32_t)sDate->Date) | \
-                  (((uint32_t)sDate->WeekDay) << 13U));
-  }
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Set Initialization mode */
-  if(RTC_EnterInitMode(hrtc) != HAL_OK)
-  {
-    /* Enable the write protection for RTC registers */
-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-    /* Set RTC state*/
-    hrtc->State = HAL_RTC_STATE_ERROR;
-
-    /* Process Unlocked */
-    __HAL_UNLOCK(hrtc);
-
-    return HAL_ERROR;
-  }
-  else
-  {
-    /* Set the RTC_DR register */
-    hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK);
-
-    /* Exit Initialization mode */
-    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
-
-    /* If  CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
-    if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
-    {
-      if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        hrtc->State = HAL_RTC_STATE_ERROR;
-
-        /* Process Unlocked */
-        __HAL_UNLOCK(hrtc);
-
-        return HAL_ERROR;
-      }
-    }
-
-    /* Enable the write protection for RTC registers */
-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-    hrtc->State = HAL_RTC_STATE_READY ;
-
-    /* Process Unlocked */
-    __HAL_UNLOCK(hrtc);
-
-    return HAL_OK;
-  }
-}
-
-/**
-  * @brief  Gets RTC current date.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  sDate Pointer to Date structure
-  * @param  Format Specifies the format of the entered parameters.
-  *          This parameter can be one of the following values:
-  *            @arg RTC_FORMAT_BIN:  Binary data format
-  *            @arg RTC_FORMAT_BCD:  BCD data format
-  * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values
-  * in the higher-order calendar shadow registers to ensure consistency between the time and date values.
-  * Reading RTC current time locks the values in calendar shadow registers until Current date is read.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
-{
-  uint32_t datetmpreg = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_FORMAT(Format));
-
-  /* Get the DR register */
-  datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK);
-
-  /* Fill the structure fields with the read parameters */
-  sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> 16U);
-  sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> 8U);
-  sDate->Date = (uint8_t)(datetmpreg & (RTC_DR_DT | RTC_DR_DU));
-  sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> 13U);
-
-  /* Check the input parameters format */
-  if(Format == RTC_FORMAT_BIN)
-  {
-    /* Convert the date structure parameters to Binary format */
-    sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year);
-    sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month);
-    sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date);
-  }
-  return HAL_OK;
-}
-
-/**
-  * @}
-  */
-
-/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions
- *  @brief   RTC Alarm functions
- *
-@verbatim
- ===============================================================================
-                 ##### RTC Alarm functions #####
- ===============================================================================
-
- [..] This section provides functions allowing to configure Alarm feature
-
-@endverbatim
-  * @{
-  */
-/**
-  * @brief  Sets the specified RTC Alarm.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  sAlarm Pointer to Alarm structure
-  * @param  Format Specifies the format of the entered parameters.
-  *          This parameter can be one of the following values:
-  *             @arg RTC_FORMAT_BIN: Binary data format
-  *             @arg RTC_FORMAT_BCD: BCD data format
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
-{
-  uint32_t tickstart = 0U;
-  uint32_t tmpreg = 0U, subsecondtmpreg = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_FORMAT(Format));
-  assert_param(IS_RTC_ALARM(sAlarm->Alarm));
-  assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
-  assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
-  assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
-  assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  if(Format == RTC_FORMAT_BIN)
-  {
-    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
-    {
-      assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
-      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
-    }
-    else
-    {
-      sAlarm->AlarmTime.TimeFormat = 0x00U;
-      assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
-    }
-    assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
-    assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
-
-    if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
-    {
-      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
-    }
-    else
-    {
-      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
-    }
-
-    tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16U) | \
-              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8U) | \
-              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
-              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16U) | \
-              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24U) | \
-              ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
-              ((uint32_t)sAlarm->AlarmMask));
-  }
-  else
-  {
-    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
-    {
-      assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
-      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
-    }
-    else
-    {
-      sAlarm->AlarmTime.TimeFormat = 0x00U;
-      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
-    }
-
-    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
-    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
-
-    if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
-    {
-      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay)));
-    }
-    else
-    {
-      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay)));
-    }
-
-    tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16U) | \
-              ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8U) | \
-              ((uint32_t) sAlarm->AlarmTime.Seconds) | \
-              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16U) | \
-              ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24U) | \
-              ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
-              ((uint32_t)sAlarm->AlarmMask));
-  }
-
-  /* Configure the Alarm A or Alarm B Sub Second registers */
-  subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Configure the Alarm register */
-  if(sAlarm->Alarm == RTC_ALARM_A)
-  {
-    /* Disable the Alarm A interrupt */
-    __HAL_RTC_ALARMA_DISABLE(hrtc);
-
-    /* In case of interrupt mode is used, the interrupt source must disabled */
-    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
-
-    /* Get tick */
-    tickstart = HAL_GetTick();
-
-    /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
-    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
-    {
-      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-        /* Process Unlocked */
-        __HAL_UNLOCK(hrtc);
-
-        return HAL_TIMEOUT;
-      }
-    }
-
-    hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
-    /* Configure the Alarm A Sub Second register */
-    hrtc->Instance->ALRMASSR = subsecondtmpreg;
-    /* Configure the Alarm state: Enable Alarm */
-    __HAL_RTC_ALARMA_ENABLE(hrtc);
-  }
-  else
-  {
-    /* Disable the Alarm B interrupt */
-    __HAL_RTC_ALARMB_DISABLE(hrtc);
-
-    /* In case of interrupt mode is used, the interrupt source must disabled */
-    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB);
-
-    /* Get tick */
-    tickstart = HAL_GetTick();
-
-    /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */
-    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
-    {
-      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-        /* Process Unlocked */
-        __HAL_UNLOCK(hrtc);
-
-        return HAL_TIMEOUT;
-      }
-    }
-
-    hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
-    /* Configure the Alarm B Sub Second register */
-    hrtc->Instance->ALRMBSSR = subsecondtmpreg;
-    /* Configure the Alarm state: Enable Alarm */
-    __HAL_RTC_ALARMB_ENABLE(hrtc);
-  }
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Sets the specified RTC Alarm with Interrupt
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  sAlarm Pointer to Alarm structure
-  * @param  Format Specifies the format of the entered parameters.
-  *          This parameter can be one of the following values:
-  *             @arg RTC_FORMAT_BIN: Binary data format
-  *             @arg RTC_FORMAT_BCD: BCD data format
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
-{
-  uint32_t tmpreg = 0U, subsecondtmpreg = 0U;
-  __IO uint32_t count = RTC_TIMEOUT_VALUE  * (SystemCoreClock / 32U / 1000U) ;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_FORMAT(Format));
-  assert_param(IS_RTC_ALARM(sAlarm->Alarm));
-  assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
-  assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
-  assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
-  assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  if(Format == RTC_FORMAT_BIN)
-  {
-    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
-    {
-      assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
-      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
-    }
-    else
-    {
-      sAlarm->AlarmTime.TimeFormat = 0x00U;
-      assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
-    }
-    assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
-    assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
-
-    if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
-    {
-      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
-    }
-    else
-    {
-      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
-    }
-    tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16U) | \
-              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8U) | \
-              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
-              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16U) | \
-              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24U) | \
-              ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
-              ((uint32_t)sAlarm->AlarmMask));
-  }
-  else
-  {
-    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
-    {
-      assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
-      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
-    }
-    else
-    {
-      sAlarm->AlarmTime.TimeFormat = 0x00U;
-      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
-    }
-
-    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
-    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
-
-    if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
-    {
-      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay)));
-    }
-    else
-    {
-      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay)));
-    }
-    tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16U) | \
-              ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8U) | \
-              ((uint32_t) sAlarm->AlarmTime.Seconds) | \
-              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16U) | \
-              ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24U) | \
-              ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
-              ((uint32_t)sAlarm->AlarmMask));
-  }
-  /* Configure the Alarm A or Alarm B Sub Second registers */
-  subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Configure the Alarm register */
-  if(sAlarm->Alarm == RTC_ALARM_A)
-  {
-    /* Disable the Alarm A interrupt */
-    __HAL_RTC_ALARMA_DISABLE(hrtc);
-
-    /* Clear flag alarm A */
-    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
-
-    /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
-    do
-    {
-      if (count-- == 0U)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-        /* Process Unlocked */
-        __HAL_UNLOCK(hrtc);
-
-        return HAL_TIMEOUT;
-      }
-    }
-    while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET);
-
-    hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
-    /* Configure the Alarm A Sub Second register */
-    hrtc->Instance->ALRMASSR = subsecondtmpreg;
-    /* Configure the Alarm state: Enable Alarm */
-    __HAL_RTC_ALARMA_ENABLE(hrtc);
-    /* Configure the Alarm interrupt */
-    __HAL_RTC_ALARM_ENABLE_IT(hrtc,RTC_IT_ALRA);
-  }
-  else
-  {
-    /* Disable the Alarm B interrupt */
-    __HAL_RTC_ALARMB_DISABLE(hrtc);
-
-    /* Clear flag alarm B */
-    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
-
-    /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */
-    do
-    {
-      if (count-- == 0U)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-        /* Process Unlocked */
-        __HAL_UNLOCK(hrtc);
-
-        return HAL_TIMEOUT;
-      }
-    }
-    while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET);
-
-    hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
-    /* Configure the Alarm B Sub Second register */
-    hrtc->Instance->ALRMBSSR = subsecondtmpreg;
-    /* Configure the Alarm state: Enable Alarm */
-    __HAL_RTC_ALARMB_ENABLE(hrtc);
-    /* Configure the Alarm interrupt */
-    __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRB);
-  }
-
-  /* RTC Alarm Interrupt Configuration: EXTI configuration */
-  __HAL_RTC_ALARM_EXTI_ENABLE_IT();
-
-  EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT;
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Deactivate the specified RTC Alarm
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  Alarm Specifies the Alarm.
-  *          This parameter can be one of the following values:
-  *            @arg RTC_ALARM_A:  AlarmA
-  *            @arg RTC_ALARM_B:  AlarmB
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm)
-{
-  uint32_t tickstart = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_ALARM(Alarm));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  if(Alarm == RTC_ALARM_A)
-  {
-    /* AlarmA */
-    __HAL_RTC_ALARMA_DISABLE(hrtc);
-
-    /* In case of interrupt mode is used, the interrupt source must disabled */
-    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
-
-    /* Get tick */
-    tickstart = HAL_GetTick();
-
-    /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */
-    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
-    {
-      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-        /* Process Unlocked */
-        __HAL_UNLOCK(hrtc);
-
-        return HAL_TIMEOUT;
-      }
-    }
-  }
-  else
-  {
-    /* AlarmB */
-    __HAL_RTC_ALARMB_DISABLE(hrtc);
-
-    /* In case of interrupt mode is used, the interrupt source must disabled */
-    __HAL_RTC_ALARM_DISABLE_IT(hrtc,RTC_IT_ALRB);
-
-    /* Get tick */
-    tickstart = HAL_GetTick();
-
-    /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */
-    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
-    {
-      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-        /* Process Unlocked */
-        __HAL_UNLOCK(hrtc);
-
-        return HAL_TIMEOUT;
-      }
-    }
-  }
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Gets the RTC Alarm value and masks.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  sAlarm Pointer to Date structure
-  * @param  Alarm Specifies the Alarm.
-  *          This parameter can be one of the following values:
-  *             @arg RTC_ALARM_A: AlarmA
-  *             @arg RTC_ALARM_B: AlarmB
-  * @param  Format Specifies the format of the entered parameters.
-  *          This parameter can be one of the following values:
-  *             @arg RTC_FORMAT_BIN: Binary data format
-  *             @arg RTC_FORMAT_BCD: BCD data format
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format)
-{
-  uint32_t tmpreg = 0U, subsecondtmpreg = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_FORMAT(Format));
-  assert_param(IS_RTC_ALARM(Alarm));
-
-  if(Alarm == RTC_ALARM_A)
-  {
-    /* AlarmA */
-    sAlarm->Alarm = RTC_ALARM_A;
-
-    tmpreg = (uint32_t)(hrtc->Instance->ALRMAR);
-    subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR ) & RTC_ALRMASSR_SS);
-  }
-  else
-  {
-    sAlarm->Alarm = RTC_ALARM_B;
-
-    tmpreg = (uint32_t)(hrtc->Instance->ALRMBR);
-    subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMBSSR) & RTC_ALRMBSSR_SS);
-  }
-
-  /* Fill the structure with the read parameters */
-  sAlarm->AlarmTime.Hours = (uint32_t)((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> 16U);
-  sAlarm->AlarmTime.Minutes = (uint32_t)((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> 8U);
-  sAlarm->AlarmTime.Seconds = (uint32_t)(tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU));
-  sAlarm->AlarmTime.TimeFormat = (uint32_t)((tmpreg & RTC_ALRMAR_PM) >> 16U);
-  sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg;
-  sAlarm->AlarmDateWeekDay = (uint32_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> 24U);
-  sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL);
-  sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL);
-
-  if(Format == RTC_FORMAT_BIN)
-  {
-    sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
-    sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes);
-    sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds);
-    sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
-  }
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  This function handles Alarm interrupt request.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval None
-  */
-void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef* hrtc)
-{
-  /* Get the AlarmA interrupt source enable status */
-  if(__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRA) != (uint32_t)RESET)
-  {
-    /* Get the pending status of the AlarmA Interrupt */
-    if(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) != (uint32_t)RESET)
-    {
-      /* AlarmA callback */
-    #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-      hrtc->AlarmAEventCallback(hrtc);
-    #else
-      HAL_RTC_AlarmAEventCallback(hrtc);
-    #endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
-
-      /* Clear the AlarmA interrupt pending bit */
-      __HAL_RTC_ALARM_CLEAR_FLAG(hrtc,RTC_FLAG_ALRAF);
-    }
-  }
-
-  /* Get the AlarmB interrupt source enable status */
-  if(__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRB) != (uint32_t)RESET)
-  {
-    /* Get the pending status of the AlarmB Interrupt */
-    if(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) != (uint32_t)RESET)
-    {
-      /* AlarmB callback */
-    #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-      hrtc->AlarmBEventCallback(hrtc);
-    #else
-      HAL_RTCEx_AlarmBEventCallback(hrtc);
-    #endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
-
-      /* Clear the AlarmB interrupt pending bit */
-      __HAL_RTC_ALARM_CLEAR_FLAG(hrtc,RTC_FLAG_ALRBF);
-    }
-  }
-
-  /* Clear the EXTI's line Flag for RTC Alarm */
-  __HAL_RTC_ALARM_EXTI_CLEAR_FLAG();
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-}
-
-/**
-  * @brief  Alarm A callback.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval None
-  */
-__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc)
-{
-  /* Prevent unused argument(s) compilation warning */
-  UNUSED(hrtc);
-  /* NOTE : This function should not be modified, when the callback is needed,
-            the HAL_RTC_AlarmAEventCallback could be implemented in the user file
-   */
-}
-
-/**
-  * @brief  This function handles AlarmA Polling request.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  Timeout Timeout duration
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
-{
-  uint32_t tickstart = 0U;
-
-    /* Get tick */
-    tickstart = HAL_GetTick();
-
-  while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == RESET)
-  {
-    if(Timeout != HAL_MAX_DELAY)
-    {
-      if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
-      {
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-        return HAL_TIMEOUT;
-      }
-    }
-  }
-
-  /* Clear the Alarm interrupt pending bit */
-  __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  return HAL_OK;
-}
-
-/**
-  * @}
-  */
-
-/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions
- *  @brief   Peripheral Control functions
- *
-@verbatim
- ===============================================================================
-                     ##### Peripheral Control functions #####
- ===============================================================================
-    [..]
-    This subsection provides functions allowing to
-      (+) Wait for RTC Time and Date Synchronization
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are
-  *         synchronized with RTC APB clock.
-  * @note   The RTC Resynchronization mode is write protected, use the
-  *         __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
-  * @note   To read the calendar through the shadow registers after Calendar
-  *         initialization, calendar update or after wake-up from low power modes
-  *         the software must first clear the RSF flag.
-  *         The software must then wait until it is set again before reading
-  *         the calendar, which means that the calendar registers have been
-  *         correctly copied into the RTC_TR and RTC_DR shadow registers.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc)
-{
-  uint32_t tickstart = 0U;
-
-  /* Clear RSF flag */
-  hrtc->Instance->ISR &= (uint32_t)RTC_RSF_MASK;
-
-    /* Get tick */
-    tickstart = HAL_GetTick();
-
-  /* Wait the registers to be synchronised */
-  while((hrtc->Instance->ISR & RTC_ISR_RSF) == (uint32_t)RESET)
-  {
-    if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
-    {
-      return HAL_TIMEOUT;
-    }
-  }
-
-  return HAL_OK;
-}
-
-/**
-  * @}
-  */
-
-/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions
- *  @brief   Peripheral State functions
- *
-@verbatim
- ===============================================================================
-                     ##### Peripheral State functions #####
- ===============================================================================
-    [..]
-    This subsection provides functions allowing to
-      (+) Get RTC state
-
-@endverbatim
-  * @{
-  */
-/**
-  * @brief  Returns the RTC state.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval HAL state
-  */
-HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef* hrtc)
-{
-  return hrtc->State;
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @brief  Enters the RTC Initialization mode.
-  * @note   The RTC Initialization mode is write protected, use the
-  *         __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc)
-{
-  uint32_t tickstart = 0U;
-
-  /* Check if the Initialization mode is set */
-  if((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
-  {
-    /* Set the Initialization mode */
-    hrtc->Instance->ISR = (uint32_t)RTC_INIT_MASK;
-
-    /* Get tick */
-    tickstart = HAL_GetTick();
-
-    /* Wait till RTC is in INIT state and if Time out is reached exit */
-    while((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
-    {
-      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
-      {
-        return HAL_TIMEOUT;
-      }
-    }
-  }
-
-  return HAL_OK;
-}
-
-
-/**
-  * @brief  Converts a 2 digit decimal to BCD format.
-  * @param  Value Byte to be converted
-  * @retval Converted byte
-  */
-uint8_t RTC_ByteToBcd2(uint8_t Value)
-{
-  uint32_t bcdhigh = 0U;
-
-  while(Value >= 10U)
-  {
-    bcdhigh++;
-    Value -= 10U;
-  }
-
-  return  ((uint8_t)(bcdhigh << 4U) | Value);
-}
-
-/**
-  * @brief  Converts from 2 digit BCD to Binary.
-  * @param  Value BCD value to be converted
-  * @retval Converted word
-  */
-uint8_t RTC_Bcd2ToByte(uint8_t Value)
-{
-  uint32_t tmp = 0U;
-  tmp = ((uint8_t)(Value & (uint8_t)0xF0) >> (uint8_t)0x4) * 10;
-  return (tmp + (Value & (uint8_t)0x0F));
-}
-
-/**
-  * @}
-  */
-
-#endif /* HAL_RTC_MODULE_ENABLED */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rtc.c
+  * @author  MCD Application Team
+  * @brief   RTC HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Real-Time Clock (RTC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + RTC Calendar (Time and Date) configuration functions
+  *           + RTC Alarms (Alarm A and Alarm B) configuration functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+               ##### RTC and Backup Domain Operating Condition #####
+  ==============================================================================
+  [..] The real-time clock (RTC), the RTC backup registers, and the backup
+       SRAM (BKP SRAM) can be powered from the VBAT voltage when the main
+       VDD supply is powered off.
+       To retain the content of the RTC backup registers, BKP SRAM, and supply
+       the RTC when VDD is turned off, VBAT pin can be connected to an optional
+       standby voltage supplied by a battery or by another source.
+
+  [..] To allow the RTC operating even when the main digital supply (VDD) is turned
+       off, the VBAT pin powers the following blocks:
+    (#) The RTC
+    (#) The LSE oscillator
+    (#) The BKP SRAM when the low power backup regulator is enabled
+    (#) PC13 to PC15 I/Os, plus PI8 I/O (when available)
+
+  [..] When the backup domain is supplied by VDD (analog switch connected to VDD),
+       the following pins are available:
+    (#) PC14 and PC15 can be used as either GPIO or LSE pins
+    (#) PC13 can be used as a GPIO or as the RTC_AF1 pin
+    (#) PI8 can be used as a GPIO or as the RTC_AF2 pin
+
+  [..] When the backup domain is supplied by VBAT (analog switch connected to VBAT
+       because VDD is not present), the following pins are available:
+    (#) PC14 and PC15 can be used as LSE pins only
+    (#) PC13 can be used as the RTC_AF1 pin
+    (#) PI8 can be used as the RTC_AF2 pin
+
+                   ##### Backup Domain Reset #####
+  ==================================================================
+  [..] The backup domain reset sets all RTC registers and the RCC_BDCR register
+       to their reset values.
+       The BKP SRAM is not affected by this reset. The only way to reset the BKP
+       SRAM is through the Flash interface by requesting a protection level
+       change from 1 to 0.
+  [..] A backup domain reset is generated when one of the following events occurs:
+    (#) Software reset, triggered by setting the BDRST bit in the
+        RCC Backup domain control register (RCC_BDCR).
+    (#) VDD or VBAT power on, if both supplies have previously been powered off.
+
+                   ##### Backup Domain Access #####
+  ==================================================================
+  [..] After reset, the backup domain (RTC registers, RTC backup data registers
+       and BKP SRAM) is protected against possible unwanted write accesses.
+  [..] To enable access to the RTC Domain and RTC registers, proceed as follows:
+    (+) Enable the Power Controller (PWR) APB1 interface clock using the
+        __HAL_RCC_PWR_CLK_ENABLE() macro.
+    (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+    (+) Select the RTC clock source using the __HAL_RCC_RTC_CONFIG() macro.
+    (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() macro.
+
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    (+) Enable the RTC domain access (see description in the section above).
+    (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
+        format using the HAL_RTC_Init() function.
+
+  *** Time and Date configuration ***
+  ===================================
+  [..]
+    (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime()
+        and HAL_RTC_SetDate() functions.
+    (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate()
+        functions.
+    (+) To manage the RTC summer or winter time change, use the following
+        functions:
+        (++) HAL_RTC_DST_Add1Hour() or HAL_RTC_DST_Sub1Hour to add or subtract
+             1 hour from the calendar time.
+        (++) HAL_RTC_DST_SetStoreOperation() or HAL_RTC_DST_ClearStoreOperation
+             to memorize whether the time change has been performed or not.
+
+  *** Alarm configuration ***
+  ===========================
+  [..]
+    (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function.
+        You can also configure the RTC Alarm with interrupt mode using the
+        HAL_RTC_SetAlarm_IT() function.
+    (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function.
+
+                  ##### RTC and low power modes #####
+  ==================================================================
+  [..] The MCU can be woken up from a low power mode by an RTC alternate
+       function.
+  [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B),
+       RTC wakeup, RTC tamper event detection and RTC timestamp event detection.
+       These RTC alternate functions can wake up the system from the Stop and
+       Standby low power modes.
+  [..] The system can also wake up from low power modes without depending
+       on an external interrupt (Auto-wakeup mode), by using the RTC alarm
+       or the RTC wakeup events.
+  [..] The RTC provides a programmable time base for waking up from the
+       Stop or Standby mode at regular intervals.
+       Wakeup from STOP and STANDBY modes is possible only when the RTC clock
+       source is LSE or LSI.
+
+  *** Callback registration ***
+  =============================================
+  [..]
+  The compilation define  USE_HAL_RTC_REGISTER_CALLBACKS when set to 1
+  allows the user to configure dynamically the driver callbacks.
+  Use Function HAL_RTC_RegisterCallback() to register an interrupt callback.
+  [..]
+  Function HAL_RTC_RegisterCallback() allows to register following callbacks:
+    (+) AlarmAEventCallback          : RTC Alarm A Event callback.
+    (+) AlarmBEventCallback          : RTC Alarm B Event callback.
+    (+) TimeStampEventCallback       : RTC Timestamp Event callback.
+    (+) WakeUpTimerEventCallback     : RTC WakeUpTimer Event callback.
+    (+) Tamper1EventCallback         : RTC Tamper 1 Event callback.
+    (+) Tamper2EventCallback         : RTC Tamper 2 Event callback.
+    (+) MspInitCallback              : RTC MspInit callback.
+    (+) MspDeInitCallback            : RTC MspDeInit callback.
+  [..]
+  This function takes as parameters the HAL peripheral handle, the Callback ID
+  and a pointer to the user callback function.
+  [..]
+  Use function HAL_RTC_UnRegisterCallback() to reset a callback to the default
+  weak function.
+  HAL_RTC_UnRegisterCallback() takes as parameters the HAL peripheral handle,
+  and the Callback ID.
+  This function allows to reset following callbacks:
+    (+) AlarmAEventCallback          : RTC Alarm A Event callback.
+    (+) AlarmBEventCallback          : RTC Alarm B Event callback.
+    (+) TimeStampEventCallback       : RTC Timestamp Event callback.
+    (+) WakeUpTimerEventCallback     : RTC WakeUpTimer Event callback.
+    (+) Tamper1EventCallback         : RTC Tamper 1 Event callback.
+    (+) Tamper2EventCallback         : RTC Tamper 2 Event callback.
+    (+) MspInitCallback              : RTC MspInit callback.
+    (+) MspDeInitCallback            : RTC MspDeInit callback.
+  [..]
+  By default, after the HAL_RTC_Init() and when the state is HAL_RTC_STATE_RESET,
+  all callbacks are set to the corresponding weak functions:
+  examples AlarmAEventCallback(), WakeUpTimerEventCallback().
+  Exception done for MspInit() and MspDeInit() callbacks that are reset to the
+  legacy weak function in the HAL_RTC_Init()/HAL_RTC_DeInit() only
+  when these callbacks are null (not registered beforehand).
+  If not, MspInit() or MspDeInit() are not null, HAL_RTC_Init()/HAL_RTC_DeInit()
+  keep and use the user MspInit()/MspDeInit() callbacks (registered beforehand).
+  [..]
+  Callbacks can be registered/unregistered in HAL_RTC_STATE_READY state only.
+  Exception done MspInit()/MspDeInit() that can be registered/unregistered
+  in HAL_RTC_STATE_READY or HAL_RTC_STATE_RESET state.
+  Thus registered (user) MspInit()/MspDeInit() callbacks can be used during the
+  Init/DeInit.
+  In that case first register the MspInit()/MspDeInit() user callbacks
+  using HAL_RTC_RegisterCallback() before calling HAL_RTC_DeInit()
+  or HAL_RTC_Init() functions.
+  [..]
+  When The compilation define USE_HAL_RTC_REGISTER_CALLBACKS is set to 0 or
+  not defined, the callback registration feature is not available and all
+  callbacks are set to the corresponding weak functions.
+
+  @endverbatim
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RTC RTC
+  * @brief    RTC HAL module driver
+  * @{
+  */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup RTC_Exported_Functions RTC Exported Functions
+  * @{
+  */
+
+/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief    Initialization and Configuration functions
+  *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+   [..] This section provides functions allowing to initialize and configure the
+         RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable
+         RTC registers Write protection, enter and exit the RTC initialization mode,
+         RTC registers synchronization check and reference clock detection enable.
+         (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base.
+             It is split into 2 programmable prescalers to minimize power consumption.
+             (++) A 7-bit asynchronous prescaler and a 15-bit synchronous prescaler.
+             (++) When both prescalers are used, it is recommended to configure the
+                 asynchronous prescaler to a high value to minimize power consumption.
+         (#) All RTC registers are Write protected. Writing to the RTC registers
+             is enabled by writing a key into the Write Protection register, RTC_WPR.
+         (#) To configure the RTC Calendar, user application should enter
+             initialization mode. In this mode, the calendar counter is stopped
+             and its value can be updated. When the initialization sequence is
+             complete, the calendar restarts counting after 4 RTCCLK cycles.
+         (#) To read the calendar through the shadow registers after Calendar
+             initialization, calendar update or after wakeup from low power modes
+             the software must first clear the RSF flag. The software must then
+             wait until it is set again before reading the calendar, which means
+             that the calendar registers have been correctly copied into the
+             RTC_TR and RTC_DR shadow registers. The HAL_RTC_WaitForSynchro() function
+             implements the above software sequence (RSF clear and RSF check).
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the RTC peripheral
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Check RTC handler validity */
+  if (hrtc == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance));
+  assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat));
+  assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv));
+  assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv));
+  assert_param(IS_RTC_OUTPUT(hrtc->Init.OutPut));
+  assert_param(IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity));
+  assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType));
+
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+  if (hrtc->State == HAL_RTC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hrtc->Lock = HAL_UNLOCKED;
+
+    hrtc->AlarmAEventCallback          =  HAL_RTC_AlarmAEventCallback;        /* Legacy weak AlarmAEventCallback      */
+    hrtc->AlarmBEventCallback          =  HAL_RTCEx_AlarmBEventCallback;      /* Legacy weak AlarmBEventCallback      */
+    hrtc->TimeStampEventCallback       =  HAL_RTCEx_TimeStampEventCallback;   /* Legacy weak TimeStampEventCallback   */
+    hrtc->WakeUpTimerEventCallback     =  HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */
+    hrtc->Tamper1EventCallback         =  HAL_RTCEx_Tamper1EventCallback;     /* Legacy weak Tamper1EventCallback     */
+#if defined(RTC_TAMPER2_SUPPORT)
+    hrtc->Tamper2EventCallback         =  HAL_RTCEx_Tamper2EventCallback;     /* Legacy weak Tamper2EventCallback     */
+#endif /* RTC_TAMPER2_SUPPORT */
+
+    if (hrtc->MspInitCallback == NULL)
+    {
+      hrtc->MspInitCallback = HAL_RTC_MspInit;
+    }
+    /* Init the low level hardware */
+    hrtc->MspInitCallback(hrtc);
+
+    if (hrtc->MspDeInitCallback == NULL)
+    {
+      hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
+    }
+  }
+#else /* USE_HAL_RTC_REGISTER_CALLBACKS */
+  if (hrtc->State == HAL_RTC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hrtc->Lock = HAL_UNLOCKED;
+
+    /* Initialize RTC MSP */
+    HAL_RTC_MspInit(hrtc);
+  }
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+  /* Set RTC state */
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Enter Initialization mode */
+  status = RTC_EnterInitMode(hrtc);
+
+  if (status == HAL_OK)
+  {
+    /* Clear RTC_CR FMT, OSEL and POL Bits */
+    hrtc->Instance->CR &= ((uint32_t)~(RTC_CR_FMT | RTC_CR_OSEL | RTC_CR_POL));
+    /* Set RTC_CR register */
+    hrtc->Instance->CR |= (uint32_t)(hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity);
+
+    /* Configure the RTC PRER */
+    hrtc->Instance->PRER = (uint32_t)(hrtc->Init.SynchPrediv);
+    hrtc->Instance->PRER |= (uint32_t)(hrtc->Init.AsynchPrediv << RTC_PRER_PREDIV_A_Pos);
+
+    /* Exit Initialization mode */
+    status = RTC_ExitInitMode(hrtc);
+  }
+
+  if (status == HAL_OK)
+  {
+    hrtc->Instance->TAFCR &= (uint32_t)~RTC_OUTPUT_TYPE_PUSHPULL;
+    hrtc->Instance->TAFCR |= (uint32_t)(hrtc->Init.OutPutType);
+
+    hrtc->State = HAL_RTC_STATE_READY;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  return status;
+}
+
+/**
+  * @brief  DeInitializes the RTC peripheral
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @note   This function does not reset the RTC Backup Data registers.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance));
+
+  /* Set RTC state */
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Enter Initialization mode */
+  status = RTC_EnterInitMode(hrtc);
+
+  if (status == HAL_OK)
+  {
+    /* Reset RTC registers */
+    hrtc->Instance->TR = 0x00000000U;
+    hrtc->Instance->DR = (RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0);
+    hrtc->Instance->CR  &= 0x00000000U;
+    hrtc->Instance->WUTR = RTC_WUTR_WUT;
+    hrtc->Instance->PRER = (uint32_t)(RTC_PRER_PREDIV_A | 0x000000FFU);
+    hrtc->Instance->CALIBR = 0x00000000U;
+    hrtc->Instance->ALRMAR   = 0x00000000U;
+    hrtc->Instance->ALRMBR   = 0x00000000U;
+    hrtc->Instance->CALR     = 0x00000000U;
+    hrtc->Instance->SHIFTR   = 0x00000000U;
+    hrtc->Instance->ALRMASSR = 0x00000000U;
+    hrtc->Instance->ALRMBSSR = 0x00000000U;
+
+    /* Exit Initialization mode */
+    status = RTC_ExitInitMode(hrtc);
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  if (status == HAL_OK)
+  {
+    /* Reset Tamper and alternate functions configuration register */
+    hrtc->Instance->TAFCR = 0x00000000U;
+
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+    if (hrtc->MspDeInitCallback == NULL)
+    {
+      hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
+    }
+
+    /* DeInit the low level hardware: CLOCK, NVIC.*/
+    hrtc->MspDeInitCallback(hrtc);
+#else /* USE_HAL_RTC_REGISTER_CALLBACKS */
+    /* De-Initialize RTC MSP */
+    HAL_RTC_MspDeInit(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+    hrtc->State = HAL_RTC_STATE_RESET;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  Registers a User RTC Callback
+  *         To be used instead of the weak predefined callback
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  CallbackID ID of the callback to be registered
+  *         This parameter can be one of the following values:
+  *          @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID          Alarm A Event Callback ID
+  *          @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID          Alarm B Event Callback ID
+  *          @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID        Timestamp Event Callback ID
+  *          @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID      Wakeup Timer Event Callback ID
+  *          @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID          Tamper 1 Callback ID
+  *          @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID          Tamper 2 Callback ID
+  *          @arg @ref HAL_RTC_MSPINIT_CB_ID                Msp Init callback ID
+  *          @arg @ref HAL_RTC_MSPDEINIT_CB_ID              Msp DeInit callback ID
+  * @note   HAL_RTC_TAMPER2_EVENT_CB_ID is not applicable to all devices.
+  * @param  pCallback pointer to the Callback function
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  if (pCallback == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Process locked */
+  __HAL_LOCK(hrtc);
+
+  if (HAL_RTC_STATE_READY == hrtc->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_RTC_ALARM_A_EVENT_CB_ID :
+        hrtc->AlarmAEventCallback = pCallback;
+        break;
+
+      case HAL_RTC_ALARM_B_EVENT_CB_ID :
+        hrtc->AlarmBEventCallback = pCallback;
+        break;
+
+      case HAL_RTC_TIMESTAMP_EVENT_CB_ID :
+        hrtc->TimeStampEventCallback = pCallback;
+        break;
+
+      case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID :
+        hrtc->WakeUpTimerEventCallback = pCallback;
+        break;
+
+      case HAL_RTC_TAMPER1_EVENT_CB_ID :
+        hrtc->Tamper1EventCallback = pCallback;
+        break;
+
+#if defined(RTC_TAMPER2_SUPPORT)
+      case HAL_RTC_TAMPER2_EVENT_CB_ID :
+        hrtc->Tamper2EventCallback = pCallback;
+        break;
+#endif /* RTC_TAMPER2_SUPPORT */
+
+      case HAL_RTC_MSPINIT_CB_ID :
+        hrtc->MspInitCallback = pCallback;
+        break;
+
+      case HAL_RTC_MSPDEINIT_CB_ID :
+        hrtc->MspDeInitCallback = pCallback;
+        break;
+
+      default :
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else if (HAL_RTC_STATE_RESET == hrtc->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_RTC_MSPINIT_CB_ID :
+        hrtc->MspInitCallback = pCallback;
+        break;
+
+      case HAL_RTC_MSPDEINIT_CB_ID :
+        hrtc->MspDeInitCallback = pCallback;
+        break;
+
+      default :
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else
+  {
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+
+/**
+  * @brief  Unregisters an RTC Callback
+  *         RTC callabck is redirected to the weak predefined callback
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  CallbackID ID of the callback to be unregistered
+  *         This parameter can be one of the following values:
+  *          @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID          Alarm A Event Callback ID
+  *          @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID          Alarm B Event Callback ID
+  *          @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID        Timestamp Event Callback ID
+  *          @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID      Wakeup Timer Event Callback ID
+  *          @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID          Tamper 1 Callback ID
+  *          @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID          Tamper 2 Callback ID
+  *          @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID
+  *          @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID
+  * @note   HAL_RTC_TAMPER2_EVENT_CB_ID is not applicable to all devices.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process locked */
+  __HAL_LOCK(hrtc);
+
+  if (HAL_RTC_STATE_READY == hrtc->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_RTC_ALARM_A_EVENT_CB_ID :
+        hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback;             /* Legacy weak AlarmAEventCallback    */
+        break;
+
+      case HAL_RTC_ALARM_B_EVENT_CB_ID :
+        hrtc->AlarmBEventCallback = HAL_RTCEx_AlarmBEventCallback;           /* Legacy weak AlarmBEventCallback */
+        break;
+
+      case HAL_RTC_TIMESTAMP_EVENT_CB_ID :
+        hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback;     /* Legacy weak TimeStampEventCallback    */
+        break;
+
+      case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID :
+        hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */
+        break;
+
+      case HAL_RTC_TAMPER1_EVENT_CB_ID :
+        hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback;         /* Legacy weak Tamper1EventCallback   */
+        break;
+
+#if defined(RTC_TAMPER2_SUPPORT)
+      case HAL_RTC_TAMPER2_EVENT_CB_ID :
+        hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback;         /* Legacy weak Tamper2EventCallback         */
+        break;
+#endif /* RTC_TAMPER2_SUPPORT */
+
+      case HAL_RTC_MSPINIT_CB_ID :
+        hrtc->MspInitCallback = HAL_RTC_MspInit;
+        break;
+
+      case HAL_RTC_MSPDEINIT_CB_ID :
+        hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
+        break;
+
+      default :
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else if (HAL_RTC_STATE_RESET == hrtc->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_RTC_MSPINIT_CB_ID :
+        hrtc->MspInitCallback = HAL_RTC_MspInit;
+        break;
+
+      case HAL_RTC_MSPDEINIT_CB_ID :
+        hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
+        break;
+
+      default :
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else
+  {
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Initializes the RTC MSP.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_RTC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the RTC MSP.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_RTC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions
+  * @brief    RTC Time and Date functions
+  *
+@verbatim
+ ===============================================================================
+                 ##### RTC Time and Date functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Time and Date features
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sets RTC current time.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTime Pointer to Time structure
+  * @note   DayLightSaving and StoreOperation interfaces are deprecated.
+  *         To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions.
+  * @param  Format Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN: Binary data format
+  *            @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+  uint32_t tmpreg = 0U;
+  HAL_StatusTypeDef status;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving));
+  assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  if (Format == RTC_FORMAT_BIN)
+  {
+    if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U)
+    {
+      assert_param(IS_RTC_HOUR12(sTime->Hours));
+      assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
+    }
+    else
+    {
+      sTime->TimeFormat = 0x00U;
+      assert_param(IS_RTC_HOUR24(sTime->Hours));
+    }
+    assert_param(IS_RTC_MINUTES(sTime->Minutes));
+    assert_param(IS_RTC_SECONDS(sTime->Seconds));
+
+    tmpreg = (uint32_t)(( (uint32_t)RTC_ByteToBcd2(sTime->Hours)   << RTC_TR_HU_Pos)  | \
+                        ( (uint32_t)RTC_ByteToBcd2(sTime->Minutes) << RTC_TR_MNU_Pos) | \
+                        ( (uint32_t)RTC_ByteToBcd2(sTime->Seconds))                   | \
+                        (((uint32_t)sTime->TimeFormat)             << RTC_TR_PM_Pos));
+  }
+  else
+  {
+    if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U)
+    {
+      assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sTime->Hours)));
+      assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
+    }
+    else
+    {
+      sTime->TimeFormat = 0x00U;
+      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours)));
+    }
+    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes)));
+    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds)));
+    tmpreg = (((uint32_t)(sTime->Hours)      << RTC_TR_HU_Pos)  | \
+              ((uint32_t)(sTime->Minutes)    << RTC_TR_MNU_Pos) | \
+              ((uint32_t) sTime->Seconds)                       | \
+              ((uint32_t)(sTime->TimeFormat) << RTC_TR_PM_Pos));
+  }
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Enter Initialization mode */
+  status = RTC_EnterInitMode(hrtc);
+
+  if (status == HAL_OK)
+  {
+    /* Set the RTC_TR register */
+    hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK);
+
+    /* Clear the bits to be configured (Deprecated. Use HAL_RTC_DST_xxx functions instead) */
+    hrtc->Instance->CR &= (uint32_t)~RTC_CR_BKP;
+
+    /* Configure the RTC_CR register (Deprecated. Use HAL_RTC_DST_xxx functions instead) */
+    hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation);
+
+    /* Exit Initialization mode */
+    status = RTC_ExitInitMode(hrtc);
+  }
+
+  if (status == HAL_OK)
+  {
+    hrtc->State = HAL_RTC_STATE_READY;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+
+/**
+  * @brief  Gets RTC current time.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTime Pointer to Time structure
+  * @param  Format Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN: Binary data format
+  *            @arg RTC_FORMAT_BCD: BCD data format
+  * @note  You can use SubSeconds and SecondFraction (sTime structure fields
+  *        returned) to convert SubSeconds value in second fraction ratio with
+  *        time unit following generic formula:
+  *        Second fraction ratio * time_unit =
+  *           [(SecondFraction - SubSeconds) / (SecondFraction + 1)] * time_unit
+  *        This conversion can be performed only if no shift operation is pending
+  *        (ie. SHFP=0) when PREDIV_S >= SS
+  * @note  You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the
+  *        values in the higher-order calendar shadow registers to ensure
+  *        consistency between the time and date values.
+  *        Reading RTC current time locks the values in calendar shadow registers
+  *        until current date is read to ensure consistency between the time and
+  *        date values.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+  uint32_t tmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+
+  /* Get subseconds value from the corresponding register */
+  sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR);
+
+  /* Get SecondFraction structure field from the corresponding register field*/
+  sTime->SecondFraction = (uint32_t)(hrtc->Instance->PRER & RTC_PRER_PREDIV_S);
+
+  /* Get the TR register */
+  tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK);
+
+  /* Fill the structure fields with the read parameters */
+  sTime->Hours      = (uint8_t)((tmpreg & (RTC_TR_HT  | RTC_TR_HU))  >> RTC_TR_HU_Pos);
+  sTime->Minutes    = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >> RTC_TR_MNU_Pos);
+  sTime->Seconds    = (uint8_t)( tmpreg & (RTC_TR_ST  | RTC_TR_SU));
+  sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM))               >> RTC_TR_PM_Pos);
+
+  /* Check the input parameters format */
+  if (Format == RTC_FORMAT_BIN)
+  {
+    /* Convert the time structure parameters to Binary format */
+    sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours);
+    sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes);
+    sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets RTC current date.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sDate Pointer to date structure
+  * @param  Format specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN: Binary data format
+  *            @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+  uint32_t datetmpreg = 0U;
+  HAL_StatusTypeDef status;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  if ((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10U) == 0x10U))
+  {
+    sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10U)) + (uint8_t)0x0AU);
+  }
+
+  assert_param(IS_RTC_WEEKDAY(sDate->WeekDay));
+
+  if (Format == RTC_FORMAT_BIN)
+  {
+    assert_param(IS_RTC_YEAR(sDate->Year));
+    assert_param(IS_RTC_MONTH(sDate->Month));
+    assert_param(IS_RTC_DATE(sDate->Date));
+
+    datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year)  << RTC_DR_YU_Pos) | \
+                  ((uint32_t)RTC_ByteToBcd2(sDate->Month) << RTC_DR_MU_Pos) | \
+                  ((uint32_t)RTC_ByteToBcd2(sDate->Date))                   | \
+                  ((uint32_t)sDate->WeekDay               << RTC_DR_WDU_Pos));
+  }
+  else
+  {
+    assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year)));
+    assert_param(IS_RTC_MONTH(RTC_Bcd2ToByte(sDate->Month)));
+    assert_param(IS_RTC_DATE(RTC_Bcd2ToByte(sDate->Date)));
+
+    datetmpreg = ((((uint32_t)sDate->Year)    << RTC_DR_YU_Pos) | \
+                  (((uint32_t)sDate->Month)   << RTC_DR_MU_Pos) | \
+                  ((uint32_t) sDate->Date)                      | \
+                  (((uint32_t)sDate->WeekDay) << RTC_DR_WDU_Pos));
+  }
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Enter Initialization mode */
+  status = RTC_EnterInitMode(hrtc);
+
+  if (status == HAL_OK)
+  {
+    /* Set the RTC_DR register */
+    hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK);
+
+    /* Exit Initialization mode */
+    status = RTC_ExitInitMode(hrtc);
+  }
+
+  if (status == HAL_OK)
+  {
+    hrtc->State = HAL_RTC_STATE_READY;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+
+/**
+  * @brief  Gets RTC current date.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sDate Pointer to Date structure
+  * @param  Format Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN:  Binary data format
+  *            @arg RTC_FORMAT_BCD:  BCD data format
+  * @note  You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the
+  *        values in the higher-order calendar shadow registers to ensure
+  *        consistency between the time and date values.
+  *        Reading RTC current time locks the values in calendar shadow registers
+  *        until current date is read to ensure consistency between the time and
+  *        date values.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+  uint32_t datetmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+
+  /* Get the DR register */
+  datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK);
+
+  /* Fill the structure fields with the read parameters */
+  sDate->Year    = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> RTC_DR_YU_Pos);
+  sDate->Month   = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> RTC_DR_MU_Pos);
+  sDate->Date    = (uint8_t) (datetmpreg & (RTC_DR_DT | RTC_DR_DU));
+  sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU))            >> RTC_DR_WDU_Pos);
+
+  /* Check the input parameters format */
+  if (Format == RTC_FORMAT_BIN)
+  {
+    /* Convert the date structure parameters to Binary format */
+    sDate->Year  = (uint8_t)RTC_Bcd2ToByte(sDate->Year);
+    sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month);
+    sDate->Date  = (uint8_t)RTC_Bcd2ToByte(sDate->Date);
+  }
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions
+  * @brief    RTC Alarm functions
+  *
+@verbatim
+ ===============================================================================
+                 ##### RTC Alarm functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Alarm feature
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Sets the specified RTC Alarm.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sAlarm Pointer to Alarm structure
+  * @param  Format Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_FORMAT_BIN: Binary data format
+  *             @arg RTC_FORMAT_BCD: BCD data format
+  * @note   The Alarm register can only be written when the corresponding Alarm
+  *         is disabled (Use the HAL_RTC_DeactivateAlarm()).
+  * @note   The HAL_RTC_SetTime() must be called before enabling the Alarm feature.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+  uint32_t tickstart = 0U;
+  uint32_t tmpreg = 0U;
+  uint32_t subsecondtmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+  assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
+  assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  /* Change RTC state to BUSY */
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Check the data format (binary or BCD) and store the Alarm time and date
+     configuration accordingly */
+  if (Format == RTC_FORMAT_BIN)
+  {
+    if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U)
+    {
+      assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    }
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00U;
+      assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+    }
+    assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+    assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+    if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+    }
+    else
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+    }
+
+    tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours)   << RTC_ALRMAR_HU_Pos)  | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds))                       | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat)            << RTC_TR_PM_Pos)      | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay)  << RTC_ALRMAR_DU_Pos)  | \
+              ((uint32_t)sAlarm->AlarmDateWeekDaySel)                                     | \
+              ((uint32_t)sAlarm->AlarmMask));
+  }
+  else
+  {
+    if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U)
+    {
+      assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    }
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00U;
+      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+    }
+
+    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+    if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay)));
+    }
+    else
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay)));
+    }
+
+    tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours)      << RTC_ALRMAR_HU_Pos)  | \
+              ((uint32_t)(sAlarm->AlarmTime.Minutes)    << RTC_ALRMAR_MNU_Pos) | \
+              ((uint32_t) sAlarm->AlarmTime.Seconds)                           | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_TR_PM_Pos)      | \
+              ((uint32_t)(sAlarm->AlarmDateWeekDay)     << RTC_ALRMAR_DU_Pos)  | \
+              ((uint32_t) sAlarm->AlarmDateWeekDaySel)                         | \
+              ((uint32_t) sAlarm->AlarmMask));
+  }
+
+  /* Store the Alarm subseconds configuration */
+  subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | \
+                               (uint32_t)(sAlarm->AlarmSubSecondMask));
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Configure the Alarm register */
+  if (sAlarm->Alarm == RTC_ALARM_A)
+  {
+    /* Disable the Alarm A */
+    __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+    /* In case interrupt mode is used, the interrupt source must be disabled */
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+    /* Clear the Alarm flag */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRAWF flag is set and if timeout is reached exit */
+    while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U)
+    {
+      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+    /* Configure the Alarm A Subseconds register */
+    hrtc->Instance->ALRMASSR = subsecondtmpreg;
+    /* Configure the Alarm state: Enable Alarm */
+    __HAL_RTC_ALARMA_ENABLE(hrtc);
+  }
+  else
+  {
+    /* Disable the Alarm B */
+    __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+    /* In case interrupt mode is used, the interrupt source must be disabled */
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB);
+
+    /* Clear the Alarm flag */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRBWF flag is set and if timeout is reached exit */
+    while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U)
+    {
+      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
+    /* Configure the Alarm B Subseconds register */
+    hrtc->Instance->ALRMBSSR = subsecondtmpreg;
+    /* Configure the Alarm state: Enable Alarm */
+    __HAL_RTC_ALARMB_ENABLE(hrtc);
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state back to READY */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets the specified RTC Alarm with Interrupt.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sAlarm Pointer to Alarm structure
+  * @param  Format Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_FORMAT_BIN: Binary data format
+  *             @arg RTC_FORMAT_BCD: BCD data format
+  * @note   The Alarm register can only be written when the corresponding Alarm
+  *         is disabled (Use the HAL_RTC_DeactivateAlarm()).
+  * @note   The HAL_RTC_SetTime() must be called before enabling the Alarm feature.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+  __IO uint32_t count  = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U);
+       uint32_t tmpreg = 0U;
+       uint32_t subsecondtmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+  assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
+  assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  /* Change RTC state to BUSY */
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Check the data format (binary or BCD) and store the Alarm time and date
+     configuration accordingly */
+  if (Format == RTC_FORMAT_BIN)
+  {
+    if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U)
+    {
+      assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    }
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00U;
+      assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+    }
+    assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+    assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+    if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+    }
+    else
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+    }
+
+    tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours)   << RTC_ALRMAR_HU_Pos)  | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds))                       | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat)            << RTC_TR_PM_Pos)      | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay)  << RTC_ALRMAR_DU_Pos)  | \
+              ((uint32_t)sAlarm->AlarmDateWeekDaySel)                                     | \
+              ((uint32_t)sAlarm->AlarmMask));
+  }
+  else
+  {
+    if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U)
+    {
+      assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    }
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00U;
+      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+    }
+
+    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+    if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay)));
+    }
+    else
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay)));
+    }
+
+    tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours)      << RTC_ALRMAR_HU_Pos)  | \
+              ((uint32_t)(sAlarm->AlarmTime.Minutes)    << RTC_ALRMAR_MNU_Pos) | \
+              ((uint32_t) sAlarm->AlarmTime.Seconds)                           | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_TR_PM_Pos)      | \
+              ((uint32_t)(sAlarm->AlarmDateWeekDay)     << RTC_ALRMAR_DU_Pos)  | \
+              ((uint32_t) sAlarm->AlarmDateWeekDaySel)                         | \
+              ((uint32_t) sAlarm->AlarmMask));
+  }
+
+  /* Store the Alarm subseconds configuration */
+  subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | \
+                               (uint32_t)(sAlarm->AlarmSubSecondMask));
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Configure the Alarm register */
+  if (sAlarm->Alarm == RTC_ALARM_A)
+  {
+    /* Disable the Alarm A */
+    __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+    /* Clear the Alarm flag */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+    /* Wait till RTC ALRAWF flag is set and if timeout is reached exit */
+    do
+    {
+      if (count-- == 0U)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    } while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U);
+
+    hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+    /* Configure the Alarm A Subseconds register */
+    hrtc->Instance->ALRMASSR = subsecondtmpreg;
+    /* Configure the Alarm state: Enable Alarm */
+    __HAL_RTC_ALARMA_ENABLE(hrtc);
+    /* Configure the Alarm interrupt */
+    __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRA);
+  }
+  else
+  {
+    /* Disable the Alarm B */
+    __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+    /* Clear the Alarm flag */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
+    /* Reload the counter */
+    count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U);
+
+    /* Wait till RTC ALRBWF flag is set and if timeout is reached exit */
+    do
+    {
+      if (count-- == 0U)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    } while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U);
+
+    hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
+    /* Configure the Alarm B Subseconds register */
+    hrtc->Instance->ALRMBSSR = subsecondtmpreg;
+    /* Configure the Alarm state: Enable Alarm */
+    __HAL_RTC_ALARMB_ENABLE(hrtc);
+    /* Configure the Alarm interrupt */
+    __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRB);
+  }
+
+  /* RTC Alarm Interrupt Configuration: EXTI configuration */
+  __HAL_RTC_ALARM_EXTI_ENABLE_IT();
+  __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state back to READY */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates the specified RTC Alarm.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Alarm Specifies the Alarm.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_ALARM_A: Alarm A
+  *            @arg RTC_ALARM_B: Alarm B
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm)
+{
+  uint32_t tickstart = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_ALARM(Alarm));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  if (Alarm == RTC_ALARM_A)
+  {
+    /* Disable Alarm A */
+    __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+    /* In case interrupt mode is used, the interrupt source must be disabled */
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRxWF flag is set and if timeout is reached exit */
+    while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U)
+    {
+      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  else
+  {
+    /* Disable Alarm B */
+    __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+    /* In case interrupt mode is used, the interrupt source must be disabled */
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRxWF flag is set and if timeout is reached exit */
+    while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U)
+    {
+      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Gets the RTC Alarm value and masks.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sAlarm Pointer to Date structure
+  * @param  Alarm Specifies the Alarm.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_ALARM_A: Alarm A
+  *            @arg RTC_ALARM_B: Alarm B
+  * @param  Format Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_FORMAT_BIN: Binary data format
+  *             @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format)
+{
+  uint32_t tmpreg = 0U;
+  uint32_t subsecondtmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_ALARM(Alarm));
+
+  if (Alarm == RTC_ALARM_A)
+  {
+    sAlarm->Alarm = RTC_ALARM_A;
+
+    tmpreg = (uint32_t)(hrtc->Instance->ALRMAR);
+    subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR) & RTC_ALRMASSR_SS);
+  }
+  else
+  {
+    sAlarm->Alarm = RTC_ALARM_B;
+
+    tmpreg = (uint32_t)(hrtc->Instance->ALRMBR);
+    subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMBSSR) & RTC_ALRMBSSR_SS);
+  }
+
+  /* Fill the structure with the read parameters */
+  sAlarm->AlarmTime.Hours      = (uint8_t) ((tmpreg & (RTC_ALRMAR_HT  | RTC_ALRMAR_HU))  >> RTC_ALRMAR_HU_Pos);
+  sAlarm->AlarmTime.Minutes    = (uint8_t) ((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> RTC_ALRMAR_MNU_Pos);
+  sAlarm->AlarmTime.Seconds    = (uint8_t) ( tmpreg & (RTC_ALRMAR_ST  | RTC_ALRMAR_SU));
+  sAlarm->AlarmTime.TimeFormat = (uint8_t) ((tmpreg & RTC_ALRMAR_PM)                     >> RTC_TR_PM_Pos);
+  sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg;
+  sAlarm->AlarmDateWeekDay     = (uint8_t) ((tmpreg & (RTC_ALRMAR_DT  | RTC_ALRMAR_DU))  >> RTC_ALRMAR_DU_Pos);
+  sAlarm->AlarmDateWeekDaySel  = (uint32_t) (tmpreg & RTC_ALRMAR_WDSEL);
+  sAlarm->AlarmMask            = (uint32_t) (tmpreg & RTC_ALARMMASK_ALL);
+
+  if (Format == RTC_FORMAT_BIN)
+  {
+    sAlarm->AlarmTime.Hours   = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+    sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes);
+    sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds);
+    sAlarm->AlarmDateWeekDay  = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles Alarm interrupt request.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+  /* Get the Alarm A interrupt source enable status */
+  if (__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRA) != 0U)
+  {
+    /* Get the pending status of the Alarm A Interrupt */
+    if (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) != 0U)
+    {
+      /* Alarm A callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+      hrtc->AlarmAEventCallback(hrtc);
+#else
+      HAL_RTC_AlarmAEventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+      /* Clear the Alarm A interrupt pending bit */
+      __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+    }
+  }
+
+  /* Get the Alarm B interrupt source enable status */
+  if (__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRB) != 0U)
+  {
+    /* Get the pending status of the Alarm B Interrupt */
+    if (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) != 0U)
+    {
+      /* Alarm B callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+      hrtc->AlarmBEventCallback(hrtc);
+#else
+      HAL_RTCEx_AlarmBEventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+      /* Clear the Alarm B interrupt pending bit */
+      __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+    }
+  }
+
+  /* Clear the EXTI's line Flag for RTC Alarm */
+  __HAL_RTC_ALARM_EXTI_CLEAR_FLAG();
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+  * @brief  Alarm A callback.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_RTC_AlarmAEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Handles Alarm A Polling request.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0U;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till RTC ALRAF flag is set and if timeout is reached exit */
+  while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == 0U)
+  {
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Clear the Alarm flag */
+  __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions
+  * @brief    Peripheral Control functions
+  *
+@verbatim
+ ===============================================================================
+                     ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Wait for RTC Time and Date Synchronization
+      (+) Manage RTC Summer or Winter time change
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are
+  *         synchronized with RTC APB clock.
+  * @note   The RTC Resynchronization mode is write protected, use the
+  *         __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
+  * @note   To read the calendar through the shadow registers after Calendar
+  *         initialization, calendar update or after wakeup from low power modes
+  *         the software must first clear the RSF flag.
+  *         The software must then wait until it is set again before reading
+  *         the calendar, which means that the calendar registers have been
+  *         correctly copied into the RTC_TR and RTC_DR shadow registers.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc)
+{
+  uint32_t tickstart = 0U;
+
+  /* Clear RSF flag */
+  hrtc->Instance->ISR &= (uint32_t)RTC_RSF_MASK;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait the registers to be synchronised */
+  while ((hrtc->Instance->ISR & RTC_ISR_RSF) == 0U)
+  {
+    if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Daylight Saving Time, adds one hour to the calendar in one
+  *         single operation without going through the initialization procedure.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc)
+{
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  SET_BIT(hrtc->Instance->CR, RTC_CR_ADD1H);
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+  * @brief  Daylight Saving Time, subtracts one hour from the calendar in one
+  *         single operation without going through the initialization procedure.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc)
+{
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  SET_BIT(hrtc->Instance->CR, RTC_CR_SUB1H);
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+  * @brief  Daylight Saving Time, sets the store operation bit.
+  * @note   It can be used by the software in order to memorize the DST status.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  SET_BIT(hrtc->Instance->CR, RTC_CR_BKP);
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+  * @brief  Daylight Saving Time, clears the store operation bit.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  CLEAR_BIT(hrtc->Instance->CR, RTC_CR_BKP);
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+  * @brief  Daylight Saving Time, reads the store operation bit.
+  * @param  hrtc RTC handle
+  * @retval operation see RTC_StoreOperation_Definitions
+  */
+uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+  return READ_BIT(hrtc->Instance->CR, RTC_CR_BKP);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions
+  * @brief    Peripheral State functions
+  *
+@verbatim
+ ===============================================================================
+                     ##### Peripheral State functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Get RTC state
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Returns the RTC state.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL state
+  */
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc)
+{
+  return hrtc->State;
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Enters the RTC Initialization mode.
+  * @note   The RTC Initialization mode is write protected, use the
+  *         __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc)
+{
+  uint32_t tickstart = 0U;
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check that Initialization mode is not already set */
+  if (READ_BIT(hrtc->Instance->ISR, RTC_ISR_INITF) == 0U)
+  {
+    /* Set INIT bit to enter Initialization mode */
+    SET_BIT(hrtc->Instance->ISR, RTC_ISR_INIT);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC is in INIT state and if timeout is reached exit */
+    while ((READ_BIT(hrtc->Instance->ISR, RTC_ISR_INITF) == 0U) && (status != HAL_ERROR))
+    {
+      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+      {
+        /* Set RTC state */
+        hrtc->State = HAL_RTC_STATE_ERROR;
+        status = HAL_ERROR;
+      }
+    }
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Exits the RTC Initialization mode.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Clear INIT bit to exit Initialization mode */
+  CLEAR_BIT(hrtc->Instance->ISR, RTC_ISR_INIT);
+
+  /* If CR_BYPSHAD bit = 0, wait for synchro */
+  if (READ_BIT(hrtc->Instance->CR, RTC_CR_BYPSHAD) == 0U)
+  {
+    if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+    {
+      /* Set RTC state */
+      hrtc->State = HAL_RTC_STATE_ERROR;
+      status = HAL_ERROR;
+    }
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Converts a 2-digit number from decimal to BCD format.
+  * @param  number decimal-formatted number (from 0 to 99) to be converted
+  * @retval Converted byte
+  */
+uint8_t RTC_ByteToBcd2(uint8_t number)
+{
+  uint8_t bcdhigh = 0U;
+
+  while (number >= 10U)
+  {
+    bcdhigh++;
+    number -= 10U;
+  }
+
+  return ((uint8_t)(bcdhigh << 4U) | number);
+}
+
+/**
+  * @brief  Converts a 2-digit number from BCD to decimal format.
+  * @param  number BCD-formatted number (from 00 to 99) to be converted
+  * @retval Converted word
+  */
+uint8_t RTC_Bcd2ToByte(uint8_t number)
+{
+  uint8_t tmp = 0U;
+  tmp = ((uint8_t)(number & (uint8_t)0xF0) >> (uint8_t)0x4) * 10;
+  return (tmp + (number & (uint8_t)0x0F));
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c

@@ -1,1784 +1,1878 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_rtc_ex.c
-  * @author  MCD Application Team
-  * @brief   RTC HAL module driver.
-  *          This file provides firmware functions to manage the following
-  *          functionalities of the Real Time Clock (RTC) Extension peripheral:
-  *           + RTC Time Stamp functions
-  *           + RTC Tamper functions
-  *           + RTC Wake-up functions
-  *           + Extension Control functions
-  *           + Extension RTC features functions
-  *
-  @verbatim
-  ==============================================================================
-                  ##### How to use this driver #####
-  ==============================================================================
-  [..]
-    (+) Enable the RTC domain access.
-    (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
-        format using the HAL_RTC_Init() function.
-
-  *** RTC Wake-up configuration ***
-  ================================
-  [..]
-    (+) To configure the RTC Wake-up Clock source and Counter use the HAL_RTCEx_SetWakeUpTimer()
-        function. You can also configure the RTC Wake-up timer in interrupt mode
-        using the HAL_RTCEx_SetWakeUpTimer_IT() function.
-    (+) To read the RTC Wake-up Counter register, use the HAL_RTCEx_GetWakeUpTimer()
-        function.
-
-  *** TimeStamp configuration ***
-  ===============================
-  [..]
-    (+) Configure the RTC_AFx trigger and enable the RTC TimeStamp using the
-        HAL_RTCEx_SetTimeStamp() function. You can also configure the RTC TimeStamp with
-        interrupt mode using the HAL_RTCEx_SetTimeStamp_IT() function.
-    (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp()
-        function.
-    (+) The TIMESTAMP alternate function can be mapped either to RTC_AF1 (PC13)
-        or RTC_AF2 (PI8 or PA0 only for STM32F446xx devices) depending on the value of TSINSEL bit in
-        RTC_TAFCR register. The corresponding pin is also selected by HAL_RTCEx_SetTimeStamp()
-        or HAL_RTCEx_SetTimeStamp_IT() function.
-
-  *** Tamper configuration ***
-  ============================
-  [..]
-    (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge
-        or Level according to the Tamper filter (if equal to 0 Edge else Level)
-        value, sampling frequency, precharge or discharge and Pull-UP using the
-        HAL_RTCEx_SetTamper() function. You can configure RTC Tamper in interrupt
-        mode using HAL_RTCEx_SetTamper_IT() function.
-    (+) The TAMPER1 alternate function can be mapped either to RTC_AF1 (PC13)
-        or RTC_AF2 (PI8 or PA0 only for STM32F446xx devices) depending on the value of TAMP1INSEL bit in
-        RTC_TAFCR register. The corresponding pin is also selected by HAL_RTCEx_SetTamper()
-        or HAL_RTCEx_SetTamper_IT() function.
-
-  *** Backup Data Registers configuration ***
-  ===========================================
-  [..]
-    (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite()
-        function.
-    (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead()
-        function.
-
-   @endverbatim
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
-  * @{
-  */
-
-/** @defgroup RTCEx RTCEx
-  * @brief RTC HAL module driver
-  * @{
-  */
-
-#ifdef HAL_RTC_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
-  * @{
-  */
-
-/** @defgroup RTCEx_Exported_Functions_Group1 RTC TimeStamp and Tamper functions
- *  @brief   RTC TimeStamp and Tamper functions
- *
-@verbatim
- ===============================================================================
-                 ##### RTC TimeStamp and Tamper functions #####
- ===============================================================================
-
- [..] This section provides functions allowing to configure TimeStamp feature
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Sets TimeStamp.
-  * @note   This API must be called before enabling the TimeStamp feature.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  TimeStampEdge Specifies the pin edge on which the TimeStamp is
-  *         activated.
-  *          This parameter can be one of the following values:
-  *             @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
-  *                                        rising edge of the related pin.
-  *             @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
-  *                                         falling edge of the related pin.
-  * @param  RTC_TimeStampPin specifies the RTC TimeStamp Pin.
-  *          This parameter can be one of the following values:
-  *             @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.
-  *             @arg RTC_TIMESTAMPPIN_POS1: PI8/PA0 is selected as RTC TimeStamp Pin.
-  *             (not applicable in the case of STM32F412xx, STM32F413xx and STM32F423xx devices)
-  *             (PI8 for all STM32 devices except for STM32F446xx devices the PA0 is used)
-  *             @arg RTC_TIMESTAMPPIN_PA0: PA0 is selected as RTC TimeStamp Pin only for STM32F446xx devices
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
-{
-  uint32_t tmpreg = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
-  assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Get the RTC_CR register and clear the bits to be configured */
-  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
-
-  tmpreg|= TimeStampEdge;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL;
-  hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin);
-
-  /* Configure the Time Stamp TSEDGE and Enable bits */
-  hrtc->Instance->CR = (uint32_t)tmpreg;
-
-  __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Sets TimeStamp with Interrupt.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @note   This API must be called before enabling the TimeStamp feature.
-  * @param  TimeStampEdge Specifies the pin edge on which the TimeStamp is
-  *         activated.
-  *          This parameter can be one of the following values:
-  *             @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
-  *                                        rising edge of the related pin.
-  *             @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
-  *                                         falling edge of the related pin.
-  * @param  RTC_TimeStampPin Specifies the RTC TimeStamp Pin.
-  *          This parameter can be one of the following values:
-  *             @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.
-  *             @arg RTC_TIMESTAMPPIN_PI8: PI8 is selected as RTC TimeStamp Pin. (not applicable in the case of STM32F446xx, STM32F412xx, STM32F413xx and STM32F423xx devices)
-  *             @arg RTC_TIMESTAMPPIN_PA0: PA0 is selected as RTC TimeStamp Pin only for STM32F446xx devices
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
-{
-  uint32_t tmpreg = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
-  assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Get the RTC_CR register and clear the bits to be configured */
-  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
-
-  tmpreg |= TimeStampEdge;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Configure the Time Stamp TSEDGE and Enable bits */
-  hrtc->Instance->CR = (uint32_t)tmpreg;
-
-  hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL;
-  hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin);
-
-  /* Clear RTC Timestamp flag */
-  __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
-
-  __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
-
-  /* Enable IT timestamp */
-  __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc,RTC_IT_TS);
-
-  /* RTC timestamp Interrupt Configuration: EXTI configuration */
-  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
-
-  EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Deactivates TimeStamp.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc)
-{
-  uint32_t tmpreg = 0U;
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* In case of interrupt mode is used, the interrupt source must disabled */
-  __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS);
-
-  /* Get the RTC_CR register and clear the bits to be configured */
-  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
-
-  /* Configure the Time Stamp TSEDGE and Enable bits */
-  hrtc->Instance->CR = (uint32_t)tmpreg;
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Gets the RTC TimeStamp value.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  sTimeStamp Pointer to Time structure
-  * @param  sTimeStampDate Pointer to Date structure
-  * @param  Format specifies the format of the entered parameters.
-  *          This parameter can be one of the following values:
-  *             RTC_FORMAT_BIN: Binary data format
-  *             RTC_FORMAT_BCD: BCD data format
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef* sTimeStamp, RTC_DateTypeDef* sTimeStampDate, uint32_t Format)
-{
-  uint32_t tmptime = 0U, tmpdate = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_FORMAT(Format));
-
-  /* Get the TimeStamp time and date registers values */
-  tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK);
-  tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK);
-
-  /* Fill the Time structure fields with the read parameters */
-  sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16U);
-  sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8U);
-  sTimeStamp->Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU));
-  sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16U);
-  sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR;
-
-  /* Fill the Date structure fields with the read parameters */
-  sTimeStampDate->Year = 0U;
-  sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8U);
-  sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU));
-  sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13U);
-
-  /* Check the input parameters format */
-  if(Format == RTC_FORMAT_BIN)
-  {
-    /* Convert the TimeStamp structure parameters to Binary format */
-    sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours);
-    sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes);
-    sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds);
-
-    /* Convert the DateTimeStamp structure parameters to Binary format */
-    sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month);
-    sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date);
-    sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay);
-  }
-
-  /* Clear the TIMESTAMP Flag */
-  __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Sets Tamper
-  * @note   By calling this API we disable the tamper interrupt for all tampers.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  sTamper Pointer to Tamper Structure.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
-{
-  uint32_t tmpreg = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_TAMPER(sTamper->Tamper));
-  assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection));
-  assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
-  assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
-  assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
-  assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
-  assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
-  assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
-  {
-    sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1U);
-  }
-
-  tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->PinSelection | (uint32_t)sTamper->Trigger  |\
-            (uint32_t)sTamper->Filter | (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\
-            (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
-
-  hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1U) | (uint32_t)RTC_TAFCR_TAMPTS |\
-                                       (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\
-                                       (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPINSEL | (uint32_t)RTC_TAFCR_TAMPIE);
-
-  hrtc->Instance->TAFCR |= tmpreg;
-
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Sets Tamper with interrupt.
-  * @note   By calling this API we force the tamper interrupt for all tampers.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  sTamper Pointer to RTC Tamper.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
-{
-  uint32_t tmpreg = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_TAMPER(sTamper->Tamper));
-  assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection));
-  assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
-  assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
-  assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
-  assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
-  assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
-  assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Configure the tamper trigger */
-  if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
-  {
-    sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1U);
-  }
-
-  tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->PinSelection | (uint32_t)sTamper->Trigger  |\
-            (uint32_t)sTamper->Filter | (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\
-            (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
-
-  hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1U) | (uint32_t)RTC_TAFCR_TAMPTS |\
-                                       (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\
-                                       (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPINSEL);
-
-  hrtc->Instance->TAFCR |= tmpreg;
-
-  /* Configure the Tamper Interrupt in the RTC_TAFCR */
-  hrtc->Instance->TAFCR |= (uint32_t)RTC_TAFCR_TAMPIE;
-
-  if(sTamper->Tamper == RTC_TAMPER_1)
-  {
-    /* Clear RTC Tamper 1 flag */
-    __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F);
-  }
-  else
-  {
-    /* Clear RTC Tamper 2 flag */
-    __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
-  }
-
-  /* RTC Tamper Interrupt Configuration: EXTI configuration */
-  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
-
-  EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
-
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Deactivates Tamper.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  Tamper Selected tamper pin.
-  *          This parameter can be RTC_Tamper_1 and/or RTC_TAMPER_2.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper)
-{
-  assert_param(IS_RTC_TAMPER(Tamper));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the selected Tamper pin */
-  hrtc->Instance->TAFCR &= (uint32_t)~Tamper;
-
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  This function handles TimeStamp interrupt request.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval None
-  */
-void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc)
-{
-  /* Get the TimeStamp interrupt source enable status */
-  if(__HAL_RTC_TIMESTAMP_GET_IT_SOURCE(hrtc, RTC_IT_TS) != (uint32_t)RESET)
-  {
-    /* Get the pending status of the TIMESTAMP Interrupt */
-    if(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) != (uint32_t)RESET)
-    {
-      /* TIMESTAMP callback */
-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-      hrtc->TimeStampEventCallback(hrtc);
-#else
-      HAL_RTCEx_TimeStampEventCallback(hrtc);
-#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
-
-      /* Clear the TIMESTAMP interrupt pending bit */
-      __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc,RTC_FLAG_TSF);
-    }
-  }
-
-  /* Get the Tamper1 interrupt source enable status */
-  if(__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP) != (uint32_t)RESET)
-  {
-    /* Get the pending status of the Tamper1 Interrupt */
-    if(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) != (uint32_t)RESET)
-    {
-      /* Tamper callback */
-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-      hrtc->Tamper1EventCallback(hrtc);
-#else
-      HAL_RTCEx_Tamper1EventCallback(hrtc);
-#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
-
-      /* Clear the Tamper interrupt pending bit */
-      __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
-    }
-  }
-
-  /* Get the Tamper2 interrupt source enable status */
-  if(__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP) != (uint32_t)RESET)
-  {
-    /* Get the pending status of the Tamper2 Interrupt */
-    if(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) != (uint32_t)RESET)
-    {
-      /* Tamper callback */
-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-      hrtc->Tamper2EventCallback(hrtc);
-#else
-      HAL_RTCEx_Tamper2EventCallback(hrtc);
-#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
-
-      /* Clear the Tamper interrupt pending bit */
-      __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
-    }
-  }
-
-  /* Clear the EXTI's Flag for RTC TimeStamp and Tamper */
-  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG();
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-}
-
-/**
-  * @brief  TimeStamp callback.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval None
-  */
-__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc)
-{
-  /* Prevent unused argument(s) compilation warning */
-  UNUSED(hrtc);
-  /* NOTE : This function Should not be modified, when the callback is needed,
-            the HAL_RTC_TimeStampEventCallback could be implemented in the user file
-  */
-}
-
-/**
-  * @brief  Tamper 1 callback.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval None
-  */
-__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc)
-{
-  /* Prevent unused argument(s) compilation warning */
-  UNUSED(hrtc);
-  /* NOTE : This function Should not be modified, when the callback is needed,
-            the HAL_RTC_Tamper1EventCallback could be implemented in the user file
-   */
-}
-
-/**
-  * @brief  Tamper 2 callback.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval None
-  */
-__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc)
-{
-  /* Prevent unused argument(s) compilation warning */
-  UNUSED(hrtc);
-  /* NOTE : This function Should not be modified, when the callback is needed,
-            the HAL_RTC_Tamper2EventCallback could be implemented in the user file
-   */
-}
-
-/**
-  * @brief  This function handles TimeStamp polling request.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  Timeout Timeout duration
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
-{
-  uint32_t tickstart = 0U;
-
-  /* Get tick */
-  tickstart = HAL_GetTick();
-
-  while(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == RESET)
-  {
-    if(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != RESET)
-    {
-      /* Clear the TIMESTAMP Overrun Flag */
-      __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF);
-
-      /* Change TIMESTAMP state */
-      hrtc->State = HAL_RTC_STATE_ERROR;
-
-      return HAL_ERROR;
-    }
-
-    if(Timeout != HAL_MAX_DELAY)
-    {
-      if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
-      {
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-        return HAL_TIMEOUT;
-      }
-    }
-  }
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  This function handles Tamper1 Polling.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  Timeout Timeout duration
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
-{
-  uint32_t tickstart = 0U;
-
-  /* Get tick */
-  tickstart = HAL_GetTick();
-
-  /* Get the status of the Interrupt */
-  while(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F)== RESET)
-  {
-    if(Timeout != HAL_MAX_DELAY)
-    {
-      if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
-      {
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-        return HAL_TIMEOUT;
-      }
-    }
-  }
-
-  /* Clear the Tamper Flag */
-  __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  This function handles Tamper2 Polling.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  Timeout Timeout duration
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
-{
-  uint32_t tickstart = 0U;
-
-  /* Get tick */
-  tickstart = HAL_GetTick();
-
-  /* Get the status of the Interrupt */
-  while(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) == RESET)
-  {
-    if(Timeout != HAL_MAX_DELAY)
-    {
-      if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
-      {
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-        return HAL_TIMEOUT;
-      }
-    }
-  }
-
-  /* Clear the Tamper Flag */
-  __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP2F);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  return HAL_OK;
-}
-
-/**
-  * @}
-  */
-
-/** @defgroup RTCEx_Exported_Functions_Group2 RTC Wake-up functions
- *  @brief   RTC Wake-up functions
- *
-@verbatim
- ===============================================================================
-                        ##### RTC Wake-up functions #####
- ===============================================================================
-
- [..] This section provides functions allowing to configure Wake-up feature
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Sets wake up timer.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  WakeUpCounter Wake up counter
-  * @param  WakeUpClock Wake up clock
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
-{
-  uint32_t tickstart = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
-  assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /*Check RTC WUTWF flag is reset only when wake up timer enabled*/
-  if((hrtc->Instance->CR & RTC_CR_WUTE) != RESET)
-  {
-    tickstart = HAL_GetTick();
-
-    /* Wait till RTC WUTWF flag is reset and if Time out is reached exit */
-    while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == SET)
-    {
-      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-        /* Process Unlocked */
-        __HAL_UNLOCK(hrtc);
-
-        return HAL_TIMEOUT;
-      }
-    }
-  }
-
-  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
-
-  tickstart = HAL_GetTick();
-
-  /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
-  while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
-  {
-    if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
-    {
-      /* Enable the write protection for RTC registers */
-      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-      hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-      /* Process Unlocked */
-      __HAL_UNLOCK(hrtc);
-
-      return HAL_TIMEOUT;
-    }
-  }
-
-  /* Clear the Wake-up Timer clock source bits in CR register */
-  hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
-
-  /* Configure the clock source */
-  hrtc->Instance->CR |= (uint32_t)WakeUpClock;
-
-  /* Configure the Wake-up Timer counter */
-  hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
-
-   /* Enable the Wake-up Timer */
-  __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Sets wake up timer with interrupt
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  WakeUpCounter Wake up counter
-  * @param  WakeUpClock Wake up clock
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
-{
-  __IO uint32_t count;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
-  assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Check RTC WUTWF flag is reset only when wake up timer enabled */
-  if((hrtc->Instance->CR & RTC_CR_WUTE) != RESET)
-  {
-    /* Wait till RTC WUTWF flag is reset and if Time out is reached exit */
-    count = RTC_TIMEOUT_VALUE  * (SystemCoreClock / 32U / 1000U);
-    do
-    {
-      if(count-- == 0U)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-        /* Process Unlocked */
-        __HAL_UNLOCK(hrtc);
-
-        return HAL_TIMEOUT;
-      }
-    }
-    while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == SET);
-  }
-
-  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
-
-  /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
-  count = RTC_TIMEOUT_VALUE  * (SystemCoreClock / 32U / 1000U);
-  do
-  {
-    if(count-- == 0U)
-    {
-      /* Enable the write protection for RTC registers */
-      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-      hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-      /* Process Unlocked */
-      __HAL_UNLOCK(hrtc);
-
-      return HAL_TIMEOUT;
-    }
-  }
-  while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET);
-
-  /* Configure the Wake-up Timer counter */
-  hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
-
-  /* Clear the Wake-up Timer clock source bits in CR register */
-  hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
-
-  /* Configure the clock source */
-  hrtc->Instance->CR |= (uint32_t)WakeUpClock;
-
-  /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */
-  __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT();
-
-  EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT;
-
-  /* Clear RTC Wake Up timer Flag */
-  __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
-
-  /* Configure the Interrupt in the RTC_CR register */
-  __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc,RTC_IT_WUT);
-
-  /* Enable the Wake-up Timer */
-  __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Deactivates wake up timer counter.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval HAL status
-  */
-uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc)
-{
-  uint32_t tickstart = 0U;
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Disable the Wake-up Timer */
-  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
-
-  /* In case of interrupt mode is used, the interrupt source must disabled */
-  __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc,RTC_IT_WUT);
-
-  /* Get tick */
-  tickstart = HAL_GetTick();
-
-  /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
-  while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
-  {
-    if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
-    {
-      /* Enable the write protection for RTC registers */
-      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-      hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-      /* Process Unlocked */
-      __HAL_UNLOCK(hrtc);
-
-      return HAL_TIMEOUT;
-    }
-  }
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Gets wake up timer counter.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval Counter value
-  */
-uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc)
-{
-  /* Get the counter value */
-  return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT));
-}
-
-/**
-  * @brief  This function handles Wake Up Timer interrupt request.
-  * @note   Unlike alarm interrupt line (shared by AlarmA and AlarmB) and tamper
-  *         interrupt line (shared by timestamp and tampers) wakeup timer
-  *         interrupt line is exclusive to the wakeup timer.
-  *         There is no need in this case to check on the interrupt enable
-  *         status via __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE().
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval None
-  */
-void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc)
-{
-  /* Get the pending status of the WAKEUPTIMER Interrupt */
-  if(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) != (uint32_t)RESET)
-  {
-    /* WAKEUPTIMER callback */
-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
-    hrtc->WakeUpTimerEventCallback(hrtc);
-#else
-    HAL_RTCEx_WakeUpTimerEventCallback(hrtc);
-#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
-
-    /* Clear the WAKEUPTIMER interrupt pending bit */
-    __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
-  }
-
-  /* Clear the EXTI's line Flag for RTC WakeUpTimer */
-  __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG();
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-}
-
-/**
-  * @brief  Wake Up Timer callback.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval None
-  */
-__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc)
-{
-  /* Prevent unused argument(s) compilation warning */
-  UNUSED(hrtc);
-  /* NOTE : This function Should not be modified, when the callback is needed,
-            the HAL_RTC_WakeUpTimerEventCallback could be implemented in the user file
-   */
-}
-
-/**
-  * @brief  This function handles Wake Up Timer Polling.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  Timeout Timeout duration
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
-{
-  uint32_t tickstart = 0U;
-
-  /* Get tick */
-  tickstart = HAL_GetTick();
-
-  while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == RESET)
-  {
-    if(Timeout != HAL_MAX_DELAY)
-    {
-      if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
-      {
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-        return HAL_TIMEOUT;
-      }
-    }
-  }
-
-  /* Clear the WAKEUPTIMER Flag */
-  __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  return HAL_OK;
-}
-
-/**
-  * @}
-  */
-
-
-/** @defgroup RTCEx_Exported_Functions_Group3 Extension Peripheral Control functions
- *  @brief   Extension Peripheral Control functions
- *
-@verbatim
- ===============================================================================
-              ##### Extension Peripheral Control functions #####
- ===============================================================================
-    [..]
-    This subsection provides functions allowing to
-      (+) Write a data in a specified RTC Backup data register
-      (+) Read a data in a specified RTC Backup data register
-      (+) Set the Coarse calibration parameters.
-      (+) Deactivate the Coarse calibration parameters
-      (+) Set the Smooth calibration parameters.
-      (+) Configure the Synchronization Shift Control Settings.
-      (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
-      (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
-      (+) Enable the RTC reference clock detection.
-      (+) Disable the RTC reference clock detection.
-      (+) Enable the Bypass Shadow feature.
-      (+) Disable the Bypass Shadow feature.
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Writes a data in a specified RTC Backup data register.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  BackupRegister RTC Backup data Register number.
-  *          This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to
-  *                                 specify the register.
-  * @param  Data Data to be written in the specified RTC Backup data register.
-  * @retval None
-  */
-void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data)
-{
-  uint32_t tmp = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_BKP(BackupRegister));
-
-  tmp = (uint32_t)&(hrtc->Instance->BKP0R);
-  tmp += (BackupRegister * 4U);
-
-  /* Write the specified register */
-  *(__IO uint32_t *)tmp = (uint32_t)Data;
-}
-
-/**
-  * @brief  Reads data from the specified RTC Backup data Register.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  BackupRegister RTC Backup data Register number.
-  *          This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to
-  *                                 specify the register.
-  * @retval Read value
-  */
-uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister)
-{
-  uint32_t tmp = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_BKP(BackupRegister));
-
-  tmp = (uint32_t)&(hrtc->Instance->BKP0R);
-  tmp += (BackupRegister * 4U);
-
-  /* Read the specified register */
-  return (*(__IO uint32_t *)tmp);
-}
-
-/**
-  * @brief  Sets the Coarse calibration parameters.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  CalibSign Specifies the sign of the coarse calibration value.
-  *          This parameter can be  one of the following values :
-  *             @arg RTC_CALIBSIGN_POSITIVE: The value sign is positive
-  *             @arg RTC_CALIBSIGN_NEGATIVE: The value sign is negative
-  * @param  Value value of coarse calibration expressed in ppm (coded on 5 bits).
-  *
-  * @note   This Calibration value should be between 0 and 63 when using negative
-  *         sign with a 2-ppm step.
-  *
-  * @note   This Calibration value should be between 0 and 126 when using positive
-  *         sign with a 4-ppm step.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef* hrtc, uint32_t CalibSign, uint32_t Value)
-{
-  /* Check the parameters */
-  assert_param(IS_RTC_CALIB_SIGN(CalibSign));
-  assert_param(IS_RTC_CALIB_VALUE(Value));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Set Initialization mode */
-  if(RTC_EnterInitMode(hrtc) != HAL_OK)
-  {
-    /* Enable the write protection for RTC registers */
-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-    /* Set RTC state*/
-    hrtc->State = HAL_RTC_STATE_ERROR;
-
-    /* Process Unlocked */
-    __HAL_UNLOCK(hrtc);
-
-    return HAL_ERROR;
-  }
-  else
-  {
-    /* Enable the Coarse Calibration */
-    __HAL_RTC_COARSE_CALIB_ENABLE(hrtc);
-
-    /* Set the coarse calibration value */
-    hrtc->Instance->CALIBR = (uint32_t)(CalibSign|Value);
-
-    /* Exit Initialization mode */
-    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
-  }
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  /* Change state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Deactivates the Coarse calibration parameters.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef* hrtc)
-{
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Set Initialization mode */
-  if(RTC_EnterInitMode(hrtc) != HAL_OK)
-  {
-    /* Enable the write protection for RTC registers */
-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-    /* Set RTC state*/
-    hrtc->State = HAL_RTC_STATE_ERROR;
-
-    /* Process Unlocked */
-    __HAL_UNLOCK(hrtc);
-
-    return HAL_ERROR;
-  }
-  else
-  {
-    /* Enable the Coarse Calibration */
-    __HAL_RTC_COARSE_CALIB_DISABLE(hrtc);
-
-    /* Exit Initialization mode */
-    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
-  }
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  /* Change state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Sets the Smooth calibration parameters.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  SmoothCalibPeriod Select the Smooth Calibration Period.
-  *          This parameter can be can be one of the following values :
-  *             @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s.
-  *             @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s.
-  *             @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s.
-  * @param  SmoothCalibPlusPulses Select to Set or reset the CALP bit.
-  *          This parameter can be one of the following values:
-  *             @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses.
-  *             @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added.
-  * @param  SmouthCalibMinusPulsesValue Select the value of CALM[80] bits.
-  *          This parameter can be one any value from 0 to 0x000001FF.
-  * @note   To deactivate the smooth calibration, the field SmoothCalibPlusPulses
-  *         must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field
-  *         SmouthCalibMinusPulsesValue must be equal to 0.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue)
-{
-  uint32_t tickstart = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod));
-  assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses));
-  assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmouthCalibMinusPulsesValue));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* check if a calibration is pending*/
-  if((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
-  {
-  /* Get tick */
-  tickstart = HAL_GetTick();
-
-    /* check if a calibration is pending*/
-    while((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
-    {
-      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        /* Change RTC state */
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-        /* Process Unlocked */
-        __HAL_UNLOCK(hrtc);
-
-        return HAL_TIMEOUT;
-      }
-    }
-  }
-
-  /* Configure the Smooth calibration settings */
-  hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmouthCalibMinusPulsesValue);
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Configures the Synchronization Shift Control Settings.
-  * @note   When REFCKON is set, firmware must not write to Shift control register.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  ShiftAdd1S Select to add or not 1 second to the time calendar.
-  *          This parameter can be one of the following values :
-  *             @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar.
-  *             @arg RTC_SHIFTADD1S_RESET: No effect.
-  * @param  ShiftSubFS Select the number of Second Fractions to substitute.
-  *          This parameter can be one any value from 0 to 0x7FFF.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef* hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS)
-{
-  uint32_t tickstart = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S));
-  assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Get tick */
-  tickstart = HAL_GetTick();
-
-    /* Wait until the shift is completed*/
-    while((hrtc->Instance->ISR & RTC_ISR_SHPF) != RESET)
-    {
-      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
-      {
-        /* Enable the write protection for RTC registers */
-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
-        /* Process Unlocked */
-        __HAL_UNLOCK(hrtc);
-
-        return HAL_TIMEOUT;
-      }
-    }
-
-    /* Check if the reference clock detection is disabled */
-    if((hrtc->Instance->CR & RTC_CR_REFCKON) == RESET)
-    {
-      /* Configure the Shift settings */
-      hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S);
-
-      /* If  RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
-      if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
-      {
-        if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
-        {
-          /* Enable the write protection for RTC registers */
-          __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-          hrtc->State = HAL_RTC_STATE_ERROR;
-
-          /* Process Unlocked */
-          __HAL_UNLOCK(hrtc);
-
-          return HAL_ERROR;
-        }
-      }
-    }
-    else
-    {
-      /* Enable the write protection for RTC registers */
-      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-      /* Change RTC state */
-      hrtc->State = HAL_RTC_STATE_ERROR;
-
-      /* Process Unlocked */
-      __HAL_UNLOCK(hrtc);
-
-      return HAL_ERROR;
-    }
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  CalibOutput Select the Calibration output Selection .
-  *          This parameter can be one of the following values:
-  *             @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz.
-  *             @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef* hrtc, uint32_t CalibOutput)
-{
-  /* Check the parameters */
-  assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput));
-
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Clear flags before config */
-  hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL;
-
-  /* Configure the RTC_CR register */
-  hrtc->Instance->CR |= (uint32_t)CalibOutput;
-
-  __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc);
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef* hrtc)
-{
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc);
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Enables the RTC reference clock detection.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef* hrtc)
-{
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Set Initialization mode */
-  if(RTC_EnterInitMode(hrtc) != HAL_OK)
-  {
-    /* Enable the write protection for RTC registers */
-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-    /* Set RTC state*/
-    hrtc->State = HAL_RTC_STATE_ERROR;
-
-    /* Process Unlocked */
-    __HAL_UNLOCK(hrtc);
-
-    return HAL_ERROR;
-  }
-  else
-  {
-    __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc);
-
-    /* Exit Initialization mode */
-    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
-  }
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-   /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Disable the RTC reference clock detection.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef* hrtc)
-{
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Set Initialization mode */
-  if(RTC_EnterInitMode(hrtc) != HAL_OK)
-  {
-    /* Enable the write protection for RTC registers */
-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-    /* Set RTC state*/
-    hrtc->State = HAL_RTC_STATE_ERROR;
-
-    /* Process Unlocked */
-    __HAL_UNLOCK(hrtc);
-
-    return HAL_ERROR;
-  }
-  else
-  {
-    __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc);
-
-    /* Exit Initialization mode */
-    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
-  }
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Enables the Bypass Shadow feature.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @note   When the Bypass Shadow is enabled the calendar value are taken
-  *         directly from the Calendar counter.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef* hrtc)
-{
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Set the BYPSHAD bit */
-  hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD;
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @brief  Disables the Bypass Shadow feature.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @note   When the Bypass Shadow is enabled the calendar value are taken
-  *         directly from the Calendar counter.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef* hrtc)
-{
-  /* Process Locked */
-  __HAL_LOCK(hrtc);
-
-  hrtc->State = HAL_RTC_STATE_BUSY;
-
-  /* Disable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
-  /* Reset the BYPSHAD bit */
-  hrtc->Instance->CR &= (uint8_t)~RTC_CR_BYPSHAD;
-
-  /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hrtc);
-
-  return HAL_OK;
-}
-
-/**
-  * @}
-  */
-
-  /** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions
- *  @brief    Extended features functions
- *
-@verbatim
- ===============================================================================
-                 ##### Extended features functions #####
- ===============================================================================
-    [..]  This section provides functions allowing to:
-      (+) RTC Alarm B callback
-      (+) RTC Poll for Alarm B request
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Alarm B callback.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @retval None
-  */
-__weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc)
-{
-  /* Prevent unused argument(s) compilation warning */
-  UNUSED(hrtc);
-  /* NOTE : This function Should not be modified, when the callback is needed,
-            the HAL_RTC_AlarmBEventCallback could be implemented in the user file
-   */
-}
-
-/**
-  * @brief  This function handles AlarmB Polling request.
-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
-  *                the configuration information for RTC.
-  * @param  Timeout Timeout duration
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
-{
-  uint32_t tickstart = 0U;
-
-  /* Get tick */
-  tickstart = HAL_GetTick();
-
-  while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) == RESET)
-  {
-    if(Timeout != HAL_MAX_DELAY)
-    {
-      if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
-      {
-        hrtc->State = HAL_RTC_STATE_TIMEOUT;
-        return HAL_TIMEOUT;
-      }
-    }
-  }
-
-  /* Clear the Alarm Flag */
-  __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
-
-  /* Change RTC state */
-  hrtc->State = HAL_RTC_STATE_READY;
-
-  return HAL_OK;
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#endif /* HAL_RTC_MODULE_ENABLED */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rtc_ex.c
+  * @author  MCD Application Team
+  * @brief   Extended RTC HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Real-Time Clock (RTC) Extended peripheral:
+  *           + RTC Timestamp functions
+  *           + RTC Tamper functions
+  *           + RTC Wakeup functions
+  *           + Extended Control functions
+  *           + Extended RTC features functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    (+) Enable the RTC domain access.
+    (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
+        format using the HAL_RTC_Init() function.
+
+  *** RTC Wakeup configuration ***
+  ================================
+  [..]
+    (+) To configure the RTC Wakeup Clock source and Counter use the
+        HAL_RTCEx_SetWakeUpTimer() function.
+        You can also configure the RTC Wakeup timer in interrupt mode using the
+        HAL_RTCEx_SetWakeUpTimer_IT() function.
+    (+) To read the RTC Wakeup Counter register, use the HAL_RTCEx_GetWakeUpTimer()
+        function.
+
+  *** Timestamp configuration ***
+  ===============================
+  [..]
+    (+) To configure the RTC Timestamp use the HAL_RTCEx_SetTimeStamp() function.
+        You can also configure the RTC Timestamp with interrupt mode using the
+        HAL_RTCEx_SetTimeStamp_IT() function.
+    (+) To read the RTC Timestamp Time and Date register, use the
+        HAL_RTCEx_GetTimeStamp() function.
+    (+) The Timestamp alternate function can be mapped either to RTC_AF1 (PC13)
+        or RTC_AF2 (PI8) depending on the value of TSINSEL bit in RTC_TAFCR
+        register.
+        For STM32F446xx devices RTC_AF2 corresponds to pin PA0 and not to pin PI8.
+        The corresponding pin is also selected by HAL_RTCEx_SetTimeStamp()
+        or HAL_RTCEx_SetTimeStamp_IT() functions.
+
+  *** Tamper configuration ***
+  ============================
+  [..]
+    (+) To Enable the RTC Tamper and configure the Tamper filter count, trigger
+        Edge or Level according to the Tamper filter value (if equal to 0 Edge
+        else Level), sampling frequency, precharge or discharge and Pull-UP use
+        the HAL_RTCEx_SetTamper() function.
+        You can configure RTC Tamper in interrupt mode using HAL_RTCEx_SetTamper_IT()
+        function.
+    (+) The TAMPER1 alternate function can be mapped either to RTC_AF1 (PC13)
+        or RTC_AF2 (PI8) depending on the value of TAMP1INSEL bit in RTC_TAFCR
+        register.
+        The corresponding pin is also selected by HAL_RTCEx_SetTamper()
+        or HAL_RTCEx_SetTamper_IT() functions.
+    (+) The TAMPER2 alternate function is mapped to RTC_AF2 (PI8).
+        For STM32F446xx devices RTC_AF2 corresponds to pin PA0 and not to pin PI8.
+
+  *** Backup Data Registers configuration ***
+  ===========================================
+  [..]
+    (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite()
+        function.
+    (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead()
+        function.
+
+  *** Coarse Digital Calibration configuration ***
+  ================================================
+  [..]
+    (+) The Coarse Digital Calibration can be used to compensate crystal inaccuracy
+        by setting the DCS bit in RTC_CALIBR register.
+    (+) When positive calibration is enabled (DCS = ‘0’), 2 asynchronous prescaler
+        clock cycles are added every minute during 2xDC minutes.
+        This causes the calendar to be updated sooner, thereby adjusting the
+        effective RTC frequency to be a bit higher.
+    (+) When negative calibration is enabled (DCS = ‘1’), 1 asynchronous prescaler
+        clock cycle is removed every minute during 2xDC minutes.
+        This causes the calendar to be updated later, thereby adjusting the
+        effective RTC frequency to be a bit lower.
+    (+) DC is configured through bits DC[4:0] of RTC_CALIBR register. This number
+        ranges from 0 to 31 corresponding to a time interval (2xDC) ranging from
+        0 to 62.
+    (+) In order to measure the clock deviation, a 512 Hz clock is output for
+        calibration.
+    (+) The RTC Coarse Digital Calibration value and sign can be calibrated using
+        the HAL_RTCEx_SetCoarseCalib() function.
+
+  *** Smooth Digital Calibration configuration ***
+  ================================================
+  [..]
+    (+) RTC frequency can be digitally calibrated with a resolution of about
+        0.954 ppm with a range from -487.1 ppm to +488.5 ppm.
+        The correction of the frequency is performed using a series of small
+        adjustments (adding and/or subtracting individual RTCCLK pulses).
+    (+) The smooth digital calibration is performed during a cycle of about 2^20
+        RTCCLK pulses (or 32 seconds) when the input frequency is 32,768 Hz.
+        This cycle is maintained by a 20-bit counter clocked by RTCCLK.
+    (+) The smooth calibration register (RTC_CALR) specifies the number of RTCCLK
+        clock cycles to be masked during the 32-second cycle.
+    (+) The RTC Smooth Digital Calibration value and the corresponding calibration
+        cycle period (32s, 16s, or 8s) can be calibrated using the
+        HAL_RTCEx_SetSmoothCalib() function.
+
+  @endverbatim
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RTCEx RTCEx
+  * @brief    RTC Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+  * @{
+  */
+
+/** @defgroup RTCEx_Exported_Functions_Group1 RTC Timestamp and Tamper functions
+  * @brief    RTC Timestamp and Tamper functions
+  *
+@verbatim
+ ===============================================================================
+                 ##### RTC Timestamp and Tamper functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Timestamp feature
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sets Timestamp.
+  * @note   This API must be called before enabling the Timestamp feature.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  RTC_TimeStampEdge Specifies the pin edge on which the Timestamp is
+  *         activated.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_TIMESTAMPEDGE_RISING: the Timestamp event occurs on
+  *                                        the rising edge of the related pin.
+  *             @arg RTC_TIMESTAMPEDGE_FALLING: the Timestamp event occurs on
+  *                                        the falling edge of the related pin.
+  * @param  RTC_TimeStampPin Specifies the RTC Timestamp Pin.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC Timestamp Pin.
+  *             @arg RTC_TIMESTAMPPIN_POS1: PI8 is selected as RTC Timestamp Pin.
+  * @note RTC_TIMESTAMPPIN_POS1 corresponds to pin PA0 in the case of
+  *       STM32F446xx devices.
+  * @note RTC_TIMESTAMPPIN_POS1 is not applicable to the following list of devices:
+  *       STM32F412xx, STM32F413xx and STM32F423xx.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t RTC_TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+  uint32_t tmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_TIMESTAMP_EDGE(RTC_TimeStampEdge));
+  assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  /* Change RTC state to BUSY */
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL;
+  hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin);
+
+  /* Get the RTC_CR register and clear the bits to be configured */
+  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+  /* Configure the Timestamp TSEDGE bit */
+  tmpreg |= RTC_TimeStampEdge;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Copy the desired configuration into the CR register */
+  hrtc->Instance->CR = (uint32_t)tmpreg;
+
+  /* Clear RTC Timestamp flag */
+  __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
+
+  /* Clear RTC Timestamp overrun Flag */
+  __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF);
+
+  /* Enable the Timestamp saving */
+  __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state back to READY */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets Timestamp with Interrupt.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @note   This API must be called before enabling the Timestamp feature.
+  * @param  RTC_TimeStampEdge Specifies the pin edge on which the Timestamp is
+  *         activated.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_TIMESTAMPEDGE_RISING: the Timestamp event occurs on
+  *                                        the rising edge of the related pin.
+  *             @arg RTC_TIMESTAMPEDGE_FALLING: the Timestamp event occurs on
+  *                                        the falling edge of the related pin.
+  * @param  RTC_TimeStampPin Specifies the RTC Timestamp Pin.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC Timestamp Pin.
+  *             @arg RTC_TIMESTAMPPIN_POS1: PI8 is selected as RTC Timestamp Pin.
+  * @note RTC_TIMESTAMPPIN_POS1 corresponds to pin PA0 in the case of
+  *       STM32F446xx devices.
+  * @note RTC_TIMESTAMPPIN_POS1 is not applicable to the following list of devices:
+  *       STM32F412xx, STM32F413xx and STM32F423xx.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t RTC_TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+  uint32_t tmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_TIMESTAMP_EDGE(RTC_TimeStampEdge));
+  assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  /* Change RTC state to BUSY */
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL;
+  hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin);
+
+  /* Get the RTC_CR register and clear the bits to be configured */
+  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+  /* Configure the Timestamp TSEDGE bit */
+  tmpreg |= RTC_TimeStampEdge;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Copy the desired configuration into the CR register */
+  hrtc->Instance->CR = (uint32_t)tmpreg;
+
+  /* Clear RTC Timestamp flag */
+  __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
+
+  /* Clear RTC Timestamp overrun Flag */
+  __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF);
+
+  /* Enable the Timestamp saving */
+  __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+
+  /* Enable IT Timestamp */
+  __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc, RTC_IT_TS);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* RTC Timestamp Interrupt Configuration: EXTI configuration */
+  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
+  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();
+
+  /* Change RTC state back to READY */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates Timestamp.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc)
+{
+  uint32_t tmpreg = 0U;
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* In case of interrupt mode is used, the interrupt source must disabled */
+  __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS);
+
+  /* Get the RTC_CR register and clear the bits to be configured */
+  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+  /* Configure the Timestamp TSEDGE and Enable bits */
+  hrtc->Instance->CR = (uint32_t)tmpreg;
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Gets the RTC Timestamp value.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTimeStamp Pointer to Time structure
+  * @param  sTimeStampDate Pointer to Date structure
+  * @param  Format specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_FORMAT_BIN: Binary data format
+  *             @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format)
+{
+  uint32_t tmptime = 0U;
+  uint32_t tmpdate = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+
+  /* Get the Timestamp time and date registers values */
+  tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK);
+  tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK);
+
+  /* Fill the Time structure fields with the read parameters */
+  sTimeStamp->Hours      = (uint8_t)((tmptime & (RTC_TSTR_HT  | RTC_TSTR_HU))  >> RTC_TSTR_HU_Pos);
+  sTimeStamp->Minutes    = (uint8_t)((tmptime & (RTC_TSTR_MNT | RTC_TSTR_MNU)) >> RTC_TSTR_MNU_Pos);
+  sTimeStamp->Seconds    = (uint8_t)((tmptime & (RTC_TSTR_ST  | RTC_TSTR_SU))  >> RTC_TSTR_SU_Pos);
+  sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TSTR_PM))                 >> RTC_TSTR_PM_Pos);
+  sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR;
+
+  /* Fill the Date structure fields with the read parameters */
+  sTimeStampDate->Year    = 0U;
+  sTimeStampDate->Month   = (uint8_t)((tmpdate & (RTC_TSDR_MT | RTC_TSDR_MU)) >> RTC_TSDR_MU_Pos);
+  sTimeStampDate->Date    = (uint8_t)((tmpdate & (RTC_TSDR_DT | RTC_TSDR_DU)) >> RTC_TSDR_DU_Pos);
+  sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_TSDR_WDU))              >> RTC_TSDR_WDU_Pos);
+
+  /* Check the input parameters format */
+  if (Format == RTC_FORMAT_BIN)
+  {
+    /* Convert the Timestamp structure parameters to Binary format */
+    sTimeStamp->Hours   = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours);
+    sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes);
+    sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds);
+
+    /* Convert the DateTimeStamp structure parameters to Binary format */
+    sTimeStampDate->Month   = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month);
+    sTimeStampDate->Date    = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date);
+    sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay);
+  }
+
+  /* Clear the Timestamp Flag */
+  __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets Tamper.
+  * @note   By calling this API the tamper global interrupt will be disabled.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTamper Pointer to Tamper Structure.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper)
+{
+  uint32_t tmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_TAMPER(sTamper->Tamper));
+  assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection));
+  assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
+  assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
+  assert_param(IS_RTC_TAMPER_FILTER_CONFIG_CORRECT(sTamper->Filter, sTamper->Trigger));
+  assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
+  assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+  assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+  assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Copy control register into temporary variable */
+  tmpreg = hrtc->Instance->TAFCR;
+
+  /* Enable selected tamper */
+  tmpreg |= (sTamper->Tamper);
+
+  /* Configure the tamper trigger bit (this bit is just on the right of the
+       tamper enable bit, hence the one-time right shift before updating it) */
+  if (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE)
+  {
+    /* Set the tamper trigger bit (case of falling edge or high level) */
+    tmpreg |= (uint32_t)(sTamper->Tamper << 1U);
+  }
+  else
+  {
+    /* Clear the tamper trigger bit (case of rising edge or low level) */
+    tmpreg &= (uint32_t)~(sTamper->Tamper << 1U);
+  }
+
+  /* Clear remaining fields before setting them */
+  tmpreg &= ~(RTC_TAMPERFILTER_MASK              | \
+              RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK | \
+              RTC_TAMPERPRECHARGEDURATION_MASK   | \
+              RTC_TAMPER_PULLUP_MASK             | \
+              RTC_TAFCR_TAMP1INSEL               | \
+              RTC_TIMESTAMPONTAMPERDETECTION_MASK);
+
+  /* Set remaining parameters of desired configuration into temporary variable */
+  tmpreg |= ((uint32_t)sTamper->Filter            | \
+             (uint32_t)sTamper->SamplingFrequency | \
+             (uint32_t)sTamper->PrechargeDuration | \
+             (uint32_t)sTamper->TamperPullUp      | \
+             (uint32_t)sTamper->PinSelection      | \
+             (uint32_t)sTamper->TimeStampOnTamperDetection);
+
+  /* Disable tamper global interrupt in case it is enabled */
+  tmpreg &= (uint32_t)~RTC_TAFCR_TAMPIE;
+
+  /* Copy desired configuration into configuration register */
+  hrtc->Instance->TAFCR = tmpreg;
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets Tamper with interrupt.
+  * @note   By calling this API the tamper global interrupt will be enabled.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTamper Pointer to RTC Tamper.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper)
+{
+  uint32_t tmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_TAMPER(sTamper->Tamper));
+  assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection));
+  assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
+  assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
+  assert_param(IS_RTC_TAMPER_FILTER_CONFIG_CORRECT(sTamper->Filter, sTamper->Trigger));
+  assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
+  assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+  assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+  assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Copy control register into temporary variable */
+  tmpreg = hrtc->Instance->TAFCR;
+
+  /* Enable selected tamper */
+  tmpreg |= (sTamper->Tamper);
+
+  /* Configure the tamper trigger bit (this bit is just on the right of the
+       tamper enable bit, hence the one-time right shift before updating it) */
+  if (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE)
+  {
+    /* Set the tamper trigger bit (case of falling edge or high level) */
+    tmpreg |= (uint32_t)(sTamper->Tamper << 1U);
+  }
+  else
+  {
+    /* Clear the tamper trigger bit (case of rising edge or low level) */
+    tmpreg &= (uint32_t)~(sTamper->Tamper << 1U);
+  }
+
+  /* Clear remaining fields before setting them */
+  tmpreg &= ~(RTC_TAMPERFILTER_MASK              | \
+              RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK | \
+              RTC_TAMPERPRECHARGEDURATION_MASK   | \
+              RTC_TAMPER_PULLUP_MASK             | \
+              RTC_TAFCR_TAMP1INSEL               | \
+              RTC_TIMESTAMPONTAMPERDETECTION_MASK);
+
+  /* Set remaining parameters of desired configuration into temporary variable */
+  tmpreg |= ((uint32_t)sTamper->Filter            | \
+             (uint32_t)sTamper->SamplingFrequency | \
+             (uint32_t)sTamper->PrechargeDuration | \
+             (uint32_t)sTamper->TamperPullUp      | \
+             (uint32_t)sTamper->PinSelection      | \
+             (uint32_t)sTamper->TimeStampOnTamperDetection);
+
+  /* Enable global tamper interrupt */
+  tmpreg |= (uint32_t)RTC_TAFCR_TAMPIE;
+
+  /* Copy desired configuration into configuration register */
+  hrtc->Instance->TAFCR = tmpreg;
+
+  /* RTC Tamper Interrupt Configuration: EXTI configuration */
+  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
+  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates Tamper.
+  * @note   The tamper global interrupt bit will remain unchanged.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Tamper Selected tamper pin.
+  *          This parameter can be any combination of the following values:
+  *            @arg RTC_TAMPER_1:  Tamper 1
+  *            @arg RTC_TAMPER_2:  Tamper 2
+  * @note   RTC_TAMPER_2 is not applicable to all devices.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper)
+{
+  assert_param(IS_RTC_TAMPER(Tamper));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the selected Tamper pin */
+  hrtc->Instance->TAFCR &= (uint32_t)~Tamper;
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles Timestamp and Tamper interrupt request.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+  /* Get the Timestamp interrupt source enable status */
+  if (__HAL_RTC_TIMESTAMP_GET_IT_SOURCE(hrtc, RTC_IT_TS) != 0U)
+  {
+    /* Get the pending status of the Timestamp Interrupt */
+    if (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) != 0U)
+    {
+      /* Timestamp callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+      hrtc->TimeStampEventCallback(hrtc);
+#else
+      HAL_RTCEx_TimeStampEventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+      /* Clear the Timestamp interrupt pending bit */
+      __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
+    }
+  }
+
+  /* Get the Tamper 1 interrupt source enable status */
+  if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP) != 0U)
+  {
+    /* Get the pending status of the Tamper 1 Interrupt */
+    if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) != 0U)
+    {
+      /* Tamper callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+      hrtc->Tamper1EventCallback(hrtc);
+#else
+      HAL_RTCEx_Tamper1EventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+      /* Clear the Tamper interrupt pending bit */
+      __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F);
+    }
+  }
+
+#if defined(RTC_TAMPER2_SUPPORT)
+  /* Get the Tamper 2 interrupt source enable status */
+  if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP) != 0U)
+  {
+    /* Get the pending status of the Tamper 2 Interrupt */
+    if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) != 0U)
+    {
+      /* Tamper callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+      hrtc->Tamper2EventCallback(hrtc);
+#else
+      HAL_RTCEx_Tamper2EventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+      /* Clear the Tamper interrupt pending bit */
+      __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
+    }
+  }
+#endif /* RTC_TAMPER2_SUPPORT */
+
+  /* Clear the EXTI's Flag for RTC Timestamp and Tamper */
+  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG();
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+  * @brief  Timestamp callback.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  Tamper 1 callback.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file
+   */
+}
+
+#if defined(RTC_TAMPER2_SUPPORT)
+/**
+  * @brief  Tamper 2 callback.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file
+   */
+}
+#endif /* RTC_TAMPER2_SUPPORT */
+
+/**
+  * @brief  Handles Timestamp polling request.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0U;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == 0U)
+  {
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+
+    if (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != 0U)
+    {
+      /* Clear the Timestamp Overrun Flag */
+      __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF);
+
+      /* Change Timestamp state */
+      hrtc->State = HAL_RTC_STATE_ERROR;
+
+      return HAL_ERROR;
+    }
+  }
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles Tamper 1 Polling.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0U;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Get the status of the Interrupt */
+  while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) == 0U)
+  {
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Clear the Tamper Flag */
+  __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+
+#if defined(RTC_TAMPER2_SUPPORT)
+/**
+  * @brief  Handles Tamper 2 Polling.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0U;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Get the status of the Interrupt */
+  while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) == 0U)
+  {
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Clear the Tamper Flag */
+  __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+#endif /* RTC_TAMPER2_SUPPORT */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Exported_Functions_Group2 RTC Wakeup functions
+  * @brief    RTC Wakeup functions
+  *
+@verbatim
+ ===============================================================================
+                        ##### RTC Wakeup functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Wakeup feature
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sets wakeup timer.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  WakeUpCounter Wakeup counter
+  * @param  WakeUpClock Wakeup clock
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+  uint32_t tickstart = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
+  assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Check RTC WUTWF flag is reset only when wakeup timer enabled*/
+  if ((hrtc->Instance->CR & RTC_CR_WUTE) != 0U)
+  {
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC WUTWF flag is reset and if timeout is reached exit */
+    while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) != 0U)
+    {
+      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Disable the Wakeup timer */
+  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+  /* Clear the Wakeup flag */
+  __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till RTC WUTWF flag is set and if timeout is reached exit */
+  while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U)
+  {
+    if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+    {
+      /* Enable the write protection for RTC registers */
+      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+      hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hrtc);
+
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Clear the Wakeup Timer clock source bits in CR register */
+  hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+
+  /* Configure the clock source */
+  hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+
+  /* Configure the Wakeup Timer counter */
+  hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+
+  /* Enable the Wakeup Timer */
+  __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets wakeup timer with interrupt.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  WakeUpCounter Wakeup counter
+  * @param  WakeUpClock Wakeup clock
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+  __IO uint32_t count  = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U);
+
+  /* Check the parameters */
+  assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
+  assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Check RTC WUTWF flag is reset only when wakeup timer enabled */
+  if ((hrtc->Instance->CR & RTC_CR_WUTE) != 0U)
+  {
+    /* Wait till RTC WUTWF flag is reset and if timeout is reached exit */
+    do
+    {
+      if (count-- == 0U)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    } while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) != 0U);
+  }
+
+  /* Disable the Wakeup timer */
+  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+  /* Clear the Wakeup flag */
+  __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+
+  /* Reload the counter */
+  count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U);
+
+  /* Wait till RTC WUTWF flag is set and if timeout is reached exit */
+  do
+  {
+    if (count-- == 0U)
+    {
+      /* Enable the write protection for RTC registers */
+      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+      hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hrtc);
+
+      return HAL_TIMEOUT;
+    }
+  } while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U);
+
+  /* Clear the Wakeup Timer clock source bits in CR register */
+  hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+
+  /* Configure the clock source */
+  hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+
+  /* Configure the Wakeup Timer counter */
+  hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+
+  /* RTC wakeup timer Interrupt Configuration: EXTI configuration */
+  __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT();
+  __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();
+
+  /* Configure the interrupt in the RTC_CR register */
+  __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc, RTC_IT_WUT);
+
+  /* Enable the Wakeup Timer */
+  __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates wakeup timer counter.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+  uint32_t tickstart = 0U;
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Disable the Wakeup Timer */
+  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+  /* In case of interrupt mode is used, the interrupt source must disabled */
+  __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc, RTC_IT_WUT);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till RTC WUTWF flag is set and if timeout is reached exit */
+  while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U)
+  {
+    if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+    {
+      /* Enable the write protection for RTC registers */
+      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+      hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hrtc);
+
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Gets wakeup timer counter.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval Counter value
+  */
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+  /* Get the counter value */
+  return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT));
+}
+
+/**
+  * @brief  Handles Wakeup Timer interrupt request.
+  * @note   Unlike alarm interrupt line (shared by Alarms A and B) or tamper
+  *         interrupt line (shared by timestamp and tampers) wakeup timer
+  *         interrupt line is exclusive to the wakeup timer.
+  *         There is no need in this case to check on the interrupt enable
+  *         status via __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE().
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+  /* Get the pending status of the Wakeup timer Interrupt */
+  if (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) != 0U)
+  {
+    /* Wakeup timer callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+    hrtc->WakeUpTimerEventCallback(hrtc);
+#else
+    HAL_RTCEx_WakeUpTimerEventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+    /* Clear the Wakeup timer interrupt pending bit */
+    __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+  }
+
+  /* Clear the EXTI's line Flag for RTC WakeUpTimer */
+  __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG();
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+  * @brief  Wakeup Timer callback.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_RTCEx_WakeUpTimerEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Handles Wakeup Timer Polling.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0U;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == 0U)
+  {
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Clear the Wakeup timer Flag */
+  __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions
+  * @brief    Extended Peripheral Control functions
+  *
+@verbatim
+ ===============================================================================
+              ##### Extended Peripheral Control functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Write a data in a specified RTC Backup data register
+      (+) Read a data in a specified RTC Backup data register
+      (+) Set the Coarse calibration parameters.
+      (+) Deactivate the Coarse calibration parameters
+      (+) Set the Smooth calibration parameters.
+      (+) Configure the Synchronization Shift Control Settings.
+      (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+      (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+      (+) Enable the RTC reference clock detection.
+      (+) Disable the RTC reference clock detection.
+      (+) Enable the Bypass Shadow feature.
+      (+) Disable the Bypass Shadow feature.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Writes a data in a specified RTC Backup data register.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  BackupRegister RTC Backup data Register number.
+  *          This parameter can be: RTC_BKP_DRx (where x can be from 0 to 19)
+  *                                 to specify the register.
+  * @param  Data Data to be written in the specified RTC Backup data register.
+  * @retval None
+  */
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data)
+{
+  uint32_t tmp = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_BKP(BackupRegister));
+
+  tmp = (uint32_t) & (hrtc->Instance->BKP0R);
+  tmp += (BackupRegister * 4U);
+
+  /* Write the specified register */
+  *(__IO uint32_t *)tmp = (uint32_t)Data;
+}
+
+/**
+  * @brief  Reads data from the specified RTC Backup data Register.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  BackupRegister RTC Backup data Register number.
+  *          This parameter can be: RTC_BKP_DRx (where x can be from 0 to 19)
+  *                                 to specify the register.
+  * @retval Read value
+  */
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister)
+{
+  uint32_t tmp = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_BKP(BackupRegister));
+
+  tmp = (uint32_t) & (hrtc->Instance->BKP0R);
+  tmp += (BackupRegister * 4U);
+
+  /* Read the specified register */
+  return (*(__IO uint32_t *)tmp);
+}
+
+/**
+  * @brief  Sets the Coarse calibration parameters.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  CalibSign Specifies the sign of the coarse calibration value.
+  *          This parameter can be  one of the following values:
+  *             @arg RTC_CALIBSIGN_POSITIVE: The value sign is positive
+  *             @arg RTC_CALIBSIGN_NEGATIVE: The value sign is negative
+  * @param  Value value of coarse calibration expressed in ppm (coded on 5 bits).
+  *
+  * @note   This Calibration value should be between 0 and 63 when using negative
+  *         sign with a 2-ppm step.
+  *
+  * @note   This Calibration value should be between 0 and 126 when using positive
+  *         sign with a 4-ppm step.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value)
+{
+  HAL_StatusTypeDef status;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_CALIB_SIGN(CalibSign));
+  assert_param(IS_RTC_CALIB_VALUE(Value));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Enter Initialization mode */
+  status = RTC_EnterInitMode(hrtc);
+
+  if (status == HAL_OK)
+  {
+    /* Enable the Coarse Calibration */
+    __HAL_RTC_COARSE_CALIB_ENABLE(hrtc);
+
+    /* Set the coarse calibration value */
+    hrtc->Instance->CALIBR = (uint32_t)(CalibSign | Value);
+
+    /* Exit Initialization mode */
+    status = RTC_ExitInitMode(hrtc);
+  }
+
+  if (status == HAL_OK)
+  {
+    hrtc->State = HAL_RTC_STATE_READY;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+
+/**
+  * @brief  Deactivates the Coarse calibration parameters.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc)
+{
+  HAL_StatusTypeDef status;
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Enter Initialization mode */
+  status = RTC_EnterInitMode(hrtc);
+
+  if (status == HAL_OK)
+  {
+    /* Disable the Coarse Calibration */
+    __HAL_RTC_COARSE_CALIB_DISABLE(hrtc);
+
+    /* Exit Initialization mode */
+    status = RTC_ExitInitMode(hrtc);
+  }
+
+  if (status == HAL_OK)
+  {
+    hrtc->State = HAL_RTC_STATE_READY;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+
+/**
+  * @brief  Sets the Smooth calibration parameters.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  SmoothCalibPeriod Select the Smooth Calibration Period.
+  *          This parameter can be can be one of the following values:
+  *             @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s.
+  *             @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s.
+  *             @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s.
+  * @param  SmoothCalibPlusPulses Select to Set or reset the CALP bit.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses.
+  *             @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added.
+  * @param  SmoothCalibMinusPulsesValue Select the value of CALM[8:0] bits.
+  *          This parameter can be one any value from 0 to 0x000001FF.
+  * @note   To deactivate the smooth calibration, the field SmoothCalibPlusPulses
+  *         must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field
+  *         SmoothCalibMinusPulsesValue must be equal to 0.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue)
+{
+  uint32_t tickstart = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod));
+  assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses));
+  assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmoothCalibMinusPulsesValue));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* check if a calibration is pending*/
+  if ((hrtc->Instance->ISR & RTC_ISR_RECALPF) != 0U)
+  {
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* check if a calibration is pending*/
+    while ((hrtc->Instance->ISR & RTC_ISR_RECALPF) != 0U)
+    {
+      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        /* Change RTC state */
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Configure the Smooth calibration settings */
+  hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod     | \
+                                    (uint32_t)SmoothCalibPlusPulses | \
+                                    (uint32_t)SmoothCalibMinusPulsesValue);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the Synchronization Shift Control Settings.
+  * @note   When REFCKON is set, firmware must not write to Shift control register.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  ShiftAdd1S Select to add or not 1 second to the time calendar.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar.
+  *             @arg RTC_SHIFTADD1S_RESET: No effect.
+  * @param  ShiftSubFS Select the number of Second Fractions to substitute.
+  *          This parameter can be one any value from 0 to 0x7FFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS)
+{
+  uint32_t tickstart = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S));
+  assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until the shift is completed */
+  while ((hrtc->Instance->ISR & RTC_ISR_SHPF) != 0U)
+  {
+    if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+    {
+      /* Enable the write protection for RTC registers */
+      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+      hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hrtc);
+
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Check if the reference clock detection is disabled */
+  if ((hrtc->Instance->CR & RTC_CR_REFCKON) == 0U)
+  {
+    /* Configure the Shift settings */
+    hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S);
+
+    /* If  RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+    if ((hrtc->Instance->CR & RTC_CR_BYPSHAD) == 0U)
+    {
+      if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_ERROR;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_ERROR;
+      }
+    }
+  }
+  else
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+    /* Change RTC state */
+    hrtc->State = HAL_RTC_STATE_ERROR;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrtc);
+
+    return HAL_ERROR;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  CalibOutput Select the Calibration output Selection.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz.
+  *             @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput)
+{
+  /* Check the parameters */
+  assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Clear flags before config */
+  hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL;
+
+  /* Configure the RTC_CR register */
+  hrtc->Instance->CR |= (uint32_t)CalibOutput;
+
+  __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc)
+{
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables the RTC reference clock detection.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc)
+{
+  HAL_StatusTypeDef status;
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Enter Initialization mode */
+  status = RTC_EnterInitMode(hrtc);
+
+  if (status == HAL_OK)
+  {
+    /* Enable the reference clock detection */
+    __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc);
+
+    /* Exit Initialization mode */
+    status = RTC_ExitInitMode(hrtc);
+  }
+
+  if (status == HAL_OK)
+  {
+    hrtc->State = HAL_RTC_STATE_READY;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+
+/**
+  * @brief  Disable the RTC reference clock detection.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc)
+{
+  HAL_StatusTypeDef status;
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Enter Initialization mode */
+  status = RTC_EnterInitMode(hrtc);
+
+  if (status == HAL_OK)
+  {
+    /* Disable the reference clock detection */
+    __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc);
+
+    /* Exit Initialization mode */
+    status = RTC_ExitInitMode(hrtc);
+  }
+
+  if (status == HAL_OK)
+  {
+    hrtc->State = HAL_RTC_STATE_READY;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+
+/**
+  * @brief  Enables the Bypass Shadow feature.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @note   When the Bypass Shadow is enabled the calendar value are taken
+  *         directly from the Calendar counter.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc)
+{
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Set the BYPSHAD bit */
+  hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD;
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables the Bypass Shadow feature.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @note   When the Bypass Shadow is enabled the calendar value are taken
+  *         directly from the Calendar counter.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc)
+{
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Reset the BYPSHAD bit */
+  hrtc->Instance->CR &= (uint8_t)~RTC_CR_BYPSHAD;
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions
+  * @brief    Extended features functions
+  *
+@verbatim
+ ===============================================================================
+                 ##### Extended features functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) RTC Alarm B callback
+      (+) RTC Poll for Alarm B request
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Alarm B callback.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_RTCEx_AlarmBEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Handles Alarm B Polling request.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0U;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till RTC ALRBF flag is set and if timeout is reached exit */
+  while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) == 0U)
+  {
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Clear the Alarm flag */
+  __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

Soft/STM32/Controle/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.c

@@ -0,0 +1,922 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_ll_adc.c
+  * @author  MCD Application Team
+  * @brief   ADC LL module driver
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_adc.h"
+#include "stm32f4xx_ll_bus.h"
+
+#ifdef  USE_FULL_ASSERT
+  #include "stm32_assert.h"
+#else
+  #define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F4xx_LL_Driver
+  * @{
+  */
+
+#if defined (ADC1) || defined (ADC2) || defined (ADC3)
+
+/** @addtogroup ADC_LL ADC
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+
+/** @addtogroup ADC_LL_Private_Macros
+  * @{
+  */
+
+/* Check of parameters for configuration of ADC hierarchical scope:           */
+/* common to several ADC instances.                                           */
+#define IS_LL_ADC_COMMON_CLOCK(__CLOCK__)                                      \
+  (   ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV2)                             \
+   || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV4)                             \
+   || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV6)                             \
+   || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV8)                             \
+  )
+
+/* Check of parameters for configuration of ADC hierarchical scope:           */
+/* ADC instance.                                                              */
+#define IS_LL_ADC_RESOLUTION(__RESOLUTION__)                                   \
+  (   ((__RESOLUTION__) == LL_ADC_RESOLUTION_12B)                              \
+   || ((__RESOLUTION__) == LL_ADC_RESOLUTION_10B)                              \
+   || ((__RESOLUTION__) == LL_ADC_RESOLUTION_8B)                               \
+   || ((__RESOLUTION__) == LL_ADC_RESOLUTION_6B)                               \
+  )
+
+#define IS_LL_ADC_DATA_ALIGN(__DATA_ALIGN__)                                   \
+  (   ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_RIGHT)                            \
+   || ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_LEFT)                             \
+  )
+
+#define IS_LL_ADC_SCAN_SELECTION(__SCAN_SELECTION__)                           \
+  (   ((__SCAN_SELECTION__) == LL_ADC_SEQ_SCAN_DISABLE)                        \
+   || ((__SCAN_SELECTION__) == LL_ADC_SEQ_SCAN_ENABLE)                         \
+  )
+
+#define IS_LL_ADC_SEQ_SCAN_MODE(__SEQ_SCAN_MODE__)                             \
+  (   ((__SCAN_MODE__) == LL_ADC_SEQ_SCAN_DISABLE)                             \
+   || ((__SCAN_MODE__) == LL_ADC_SEQ_SCAN_ENABLE)                              \
+  )
+
+/* Check of parameters for configuration of ADC hierarchical scope:           */
+/* ADC group regular                                                          */
+#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__)                         \
+  (   ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE)                      \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH1)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH2)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH3)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH2)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH3)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH4)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_TRGO)                 \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_CH1)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO)                 \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM4_CH4)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH1)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH2)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH3)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_CH1)                  \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_TRGO)                 \
+   || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11)               \
+  )
+#define IS_LL_ADC_REG_CONTINUOUS_MODE(__REG_CONTINUOUS_MODE__)                 \
+  (   ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_SINGLE)                    \
+   || ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_CONTINUOUS)                \
+  )
+
+#define IS_LL_ADC_REG_DMA_TRANSFER(__REG_DMA_TRANSFER__)                       \
+  (   ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_NONE)                 \
+   || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_LIMITED)              \
+   || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_UNLIMITED)            \
+  )
+
+#define IS_LL_ADC_REG_FLAG_EOC_SELECTION(__REG_FLAG_EOC_SELECTION__)           \
+  (   ((__REG_FLAG_EOC_SELECTION__) == LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV)      \
+   || ((__REG_FLAG_EOC_SELECTION__) == LL_ADC_REG_FLAG_EOC_UNITARY_CONV)       \
+  )
+
+#define IS_LL_ADC_REG_SEQ_SCAN_LENGTH(__REG_SEQ_SCAN_LENGTH__)                 \
+  (   ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_DISABLE)               \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS)         \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS)        \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS)        \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS)        \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS)        \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS)        \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS)        \
+   || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS)        \
+  )
+
+#define IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(__REG_SEQ_DISCONT_MODE__)          \
+  (   ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_DISABLE)           \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_1RANK)             \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_2RANKS)            \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_3RANKS)            \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_4RANKS)            \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_5RANKS)            \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_6RANKS)            \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_7RANKS)            \
+   || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_8RANKS)            \
+  )
+
+/* Check of parameters for configuration of ADC hierarchical scope:           */
+/* ADC group injected                                                         */
+#define IS_LL_ADC_INJ_TRIG_SOURCE(__INJ_TRIG_SOURCE__)                         \
+  (   ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_SOFTWARE)                      \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_CH4)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_TRGO)                 \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_CH1)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_TRGO)                 \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH2)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH4)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH1)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH2)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH3)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_TRGO)                 \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM5_CH4)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM5_TRGO)                 \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH2)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH3)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH4)                  \
+   || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_EXTI_LINE15)               \
+  )
+
+#define IS_LL_ADC_INJ_TRIG_EXT_EDGE(__INJ_TRIG_EXT_EDGE__)                     \
+  (   ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_RISING)                  \
+   || ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_FALLING)                 \
+   || ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_RISINGFALLING)           \
+  )
+
+#define IS_LL_ADC_INJ_TRIG_AUTO(__INJ_TRIG_AUTO__)                             \
+  (   ((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_INDEPENDENT)                     \
+   || ((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_FROM_GRP_REGULAR)                \
+  )
+
+#define IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(__INJ_SEQ_SCAN_LENGTH__)                 \
+  (   ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_DISABLE)               \
+   || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS)         \
+   || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS)         \
+   || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS)         \
+  )
+
+#define IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(__INJ_SEQ_DISCONT_MODE__)          \
+  (   ((__INJ_SEQ_DISCONT_MODE__) == LL_ADC_INJ_SEQ_DISCONT_DISABLE)           \
+   || ((__INJ_SEQ_DISCONT_MODE__) == LL_ADC_INJ_SEQ_DISCONT_1RANK)             \
+  )
+
+#if defined(ADC_MULTIMODE_SUPPORT)
+/* Check of parameters for configuration of ADC hierarchical scope:           */
+/* multimode.                                                                 */
+#if defined(ADC3)
+#define IS_LL_ADC_MULTI_MODE(__MULTI_MODE__)                                   \
+  (   ((__MULTI_MODE__) == LL_ADC_MULTI_INDEPENDENT)                           \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIMULT)                       \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTERL)                       \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_SIMULT)                       \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_ALTERN)                       \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM)                  \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT)                  \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM)                  \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_SIM)                \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_ALT)                \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_INJ_SIMULT)                     \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_SIMULT)                     \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_INTERL)                     \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_INJ_ALTERN)                     \
+  )
+#else
+#define IS_LL_ADC_MULTI_MODE(__MULTI_MODE__)                                   \
+  (   ((__MULTI_MODE__) == LL_ADC_MULTI_INDEPENDENT)                           \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIMULT)                       \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTERL)                       \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_SIMULT)                       \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_ALTERN)                       \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM)                  \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT)                  \
+   || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM)                  \
+  )
+#endif
+
+#define IS_LL_ADC_MULTI_DMA_TRANSFER(__MULTI_DMA_TRANSFER__)                   \
+  (   ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_EACH_ADC)              \
+   || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_1)               \
+   || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_2)               \
+   || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_3)               \
+   || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_1)               \
+   || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_2)               \
+   || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_3)               \
+  )
+
+#define IS_LL_ADC_MULTI_TWOSMP_DELAY(__MULTI_TWOSMP_DELAY__)                   \
+  (   ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES)          \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES)          \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES)          \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES)          \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES)          \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES)         \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES)         \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES)         \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_13CYCLES)         \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES)         \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_15CYCLES)         \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_16CYCLES)         \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_17CYCLES)         \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_18CYCLES)         \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_19CYCLES)         \
+   || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_20CYCLES)         \
+  )
+
+#define IS_LL_ADC_MULTI_MASTER_SLAVE(__MULTI_MASTER_SLAVE__)                   \
+  (   ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_MASTER)                        \
+   || ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_SLAVE)                         \
+   || ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_MASTER_SLAVE)                  \
+  )
+
+#endif /* ADC_MULTIMODE_SUPPORT */
+/**
+  * @}
+  */
+
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADC_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup ADC_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize registers of all ADC instances belonging to
+  *         the same ADC common instance to their default reset values.
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: ADC common registers are de-initialized
+  *          - ERROR: not applicable
+  */
+ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON));
+  
+
+  /* Force reset of ADC clock (core clock) */
+  LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC);
+  
+  /* Release reset of ADC clock (core clock) */
+  LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC);
+  
+  return SUCCESS;
+}
+
+/**
+  * @brief  Initialize some features of ADC common parameters
+  *         (all ADC instances belonging to the same ADC common instance)
+  *         and multimode (for devices with several ADC instances available).
+  * @note   The setting of ADC common parameters is conditioned to
+  *         ADC instances state:
+  *         All ADC instances belonging to the same ADC common instance
+  *         must be disabled.
+  * @param  ADCxy_COMMON ADC common instance
+  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+  * @param  ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: ADC common registers are initialized
+  *          - ERROR: ADC common registers are not initialized
+  */
+ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct)
+{
+  ErrorStatus status = SUCCESS;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON));
+  assert_param(IS_LL_ADC_COMMON_CLOCK(ADC_CommonInitStruct->CommonClock));
+  
+#if defined(ADC_MULTIMODE_SUPPORT)
+  assert_param(IS_LL_ADC_MULTI_MODE(ADC_CommonInitStruct->Multimode));
+  if(ADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT)
+  {
+    assert_param(IS_LL_ADC_MULTI_DMA_TRANSFER(ADC_CommonInitStruct->MultiDMATransfer));
+    assert_param(IS_LL_ADC_MULTI_TWOSMP_DELAY(ADC_CommonInitStruct->MultiTwoSamplingDelay));
+  }
+#endif /* ADC_MULTIMODE_SUPPORT */
+
+  /* Note: Hardware constraint (refer to description of functions             */
+  /*       "LL_ADC_SetCommonXXX()" and "LL_ADC_SetMultiXXX()"):               */
+  /*       On this STM32 series, setting of these features is conditioned to  */
+  /*       ADC state:                                                         */
+  /*       All ADC instances of the ADC common group must be disabled.        */
+  if(__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0UL)
+  {
+    /* Configuration of ADC hierarchical scope:                               */
+    /*  - common to several ADC                                               */
+    /*    (all ADC instances belonging to the same ADC common instance)       */
+    /*    - Set ADC clock (conversion clock)                                  */
+    /*  - multimode (if several ADC instances available on the                */
+    /*    selected device)                                                    */
+    /*    - Set ADC multimode configuration                                   */
+    /*    - Set ADC multimode DMA transfer                                    */
+    /*    - Set ADC multimode: delay between 2 sampling phases                */
+#if defined(ADC_MULTIMODE_SUPPORT)
+    if(ADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT)
+    {
+      MODIFY_REG(ADCxy_COMMON->CCR,
+                   ADC_CCR_ADCPRE
+                 | ADC_CCR_MULTI
+                 | ADC_CCR_DMA
+                 | ADC_CCR_DDS
+                 | ADC_CCR_DELAY
+                ,
+                   ADC_CommonInitStruct->CommonClock
+                 | ADC_CommonInitStruct->Multimode
+                 | ADC_CommonInitStruct->MultiDMATransfer
+                 | ADC_CommonInitStruct->MultiTwoSamplingDelay
+                );
+    }
+    else
+    {
+      MODIFY_REG(ADCxy_COMMON->CCR,
+                   ADC_CCR_ADCPRE
+                 | ADC_CCR_MULTI
+                 | ADC_CCR_DMA
+                 | ADC_CCR_DDS
+                 | ADC_CCR_DELAY
+                ,
+                   ADC_CommonInitStruct->CommonClock
+                 | LL_ADC_MULTI_INDEPENDENT
+                );
+    }
+#else
+    LL_ADC_SetCommonClock(ADCxy_COMMON, ADC_CommonInitStruct->CommonClock);
+#endif
+  }
+  else
+  {
+    /* Initialization error: One or several ADC instances belonging to        */
+    /* the same ADC common instance are not disabled.                         */
+    status = ERROR;
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_ADC_CommonInitTypeDef field to default value.
+  * @param  ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure
+  *                              whose fields will be set to default values.
+  * @retval None
+  */
+void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct)
+{
+  /* Set ADC_CommonInitStruct fields to default values */
+  /* Set fields of ADC common */
+  /* (all ADC instances belonging to the same ADC common instance) */
+  ADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_SYNC_PCLK_DIV2;
+  
+#if defined(ADC_MULTIMODE_SUPPORT)
+  /* Set fields of ADC multimode */
+  ADC_CommonInitStruct->Multimode             = LL_ADC_MULTI_INDEPENDENT;
+    ADC_CommonInitStruct->MultiDMATransfer      = LL_ADC_MULTI_REG_DMA_EACH_ADC;
+  ADC_CommonInitStruct->MultiTwoSamplingDelay = LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES;
+#endif /* ADC_MULTIMODE_SUPPORT */
+}
+
+/**
+  * @brief  De-initialize registers of the selected ADC instance
+  *         to their default reset values.
+  * @note   To reset all ADC instances quickly (perform a hard reset),
+  *         use function @ref LL_ADC_CommonDeInit().
+  * @param  ADCx ADC instance
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: ADC registers are de-initialized
+  *          - ERROR: ADC registers are not de-initialized
+  */
+ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx)
+{
+  ErrorStatus status = SUCCESS;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(ADCx));
+  
+  /* Disable ADC instance if not already disabled.                            */
+  if(LL_ADC_IsEnabled(ADCx) == 1UL)
+  {
+    /* Set ADC group regular trigger source to SW start to ensure to not      */
+    /* have an external trigger event occurring during the conversion stop    */
+    /* ADC disable process.                                                   */
+    LL_ADC_REG_SetTriggerSource(ADCx, LL_ADC_REG_TRIG_SOFTWARE);
+    
+    /* Set ADC group injected trigger source to SW start to ensure to not     */
+    /* have an external trigger event occurring during the conversion stop    */
+    /* ADC disable process.                                                   */
+    LL_ADC_INJ_SetTriggerSource(ADCx, LL_ADC_INJ_TRIG_SOFTWARE);
+    
+    /* Disable the ADC instance */
+    LL_ADC_Disable(ADCx);
+  }
+  
+  /* Check whether ADC state is compliant with expected state */
+  /* (hardware requirements of bits state to reset registers below) */
+  if(READ_BIT(ADCx->CR2, ADC_CR2_ADON) == 0UL)
+  {
+    /* ========== Reset ADC registers ========== */
+    /* Reset register SR */
+    CLEAR_BIT(ADCx->SR,
+              (  LL_ADC_FLAG_STRT
+               | LL_ADC_FLAG_JSTRT
+               | LL_ADC_FLAG_EOCS
+               | LL_ADC_FLAG_OVR
+               | LL_ADC_FLAG_JEOS
+               | LL_ADC_FLAG_AWD1 )
+             );
+    
+    /* Reset register CR1 */
+    CLEAR_BIT(ADCx->CR1,
+              (  ADC_CR1_OVRIE   | ADC_CR1_RES     | ADC_CR1_AWDEN
+               | ADC_CR1_JAWDEN
+               | ADC_CR1_DISCNUM | ADC_CR1_JDISCEN | ADC_CR1_DISCEN
+               | ADC_CR1_JAUTO   | ADC_CR1_AWDSGL  | ADC_CR1_SCAN
+               | ADC_CR1_JEOCIE  | ADC_CR1_AWDIE   | ADC_CR1_EOCIE
+               | ADC_CR1_AWDCH                                     )
+             );
+    
+    /* Reset register CR2 */
+    CLEAR_BIT(ADCx->CR2,
+              (  ADC_CR2_SWSTART  | ADC_CR2_EXTEN  | ADC_CR2_EXTSEL
+               | ADC_CR2_JSWSTART | ADC_CR2_JEXTEN | ADC_CR2_JEXTSEL
+               | ADC_CR2_ALIGN    | ADC_CR2_EOCS
+               | ADC_CR2_DDS      | ADC_CR2_DMA
+               | ADC_CR2_CONT     | ADC_CR2_ADON                    )
+             );
+    
+    /* Reset register SMPR1 */
+    CLEAR_BIT(ADCx->SMPR1,
+              (  ADC_SMPR1_SMP18 | ADC_SMPR1_SMP17 | ADC_SMPR1_SMP16
+               | ADC_SMPR1_SMP15 | ADC_SMPR1_SMP14 | ADC_SMPR1_SMP13
+               | ADC_SMPR1_SMP12 | ADC_SMPR1_SMP11 | ADC_SMPR1_SMP10)
+             );
+    
+    /* Reset register SMPR2 */
+    CLEAR_BIT(ADCx->SMPR2,
+              (  ADC_SMPR2_SMP9
+               | ADC_SMPR2_SMP8 | ADC_SMPR2_SMP7 | ADC_SMPR2_SMP6
+               | ADC_SMPR2_SMP5 | ADC_SMPR2_SMP4 | ADC_SMPR2_SMP3
+               | ADC_SMPR2_SMP2 | ADC_SMPR2_SMP1 | ADC_SMPR2_SMP0)
+             );
+    
+    /* Reset register JOFR1 */
+    CLEAR_BIT(ADCx->JOFR1, ADC_JOFR1_JOFFSET1);
+    /* Reset register JOFR2 */
+    CLEAR_BIT(ADCx->JOFR2, ADC_JOFR2_JOFFSET2);
+    /* Reset register JOFR3 */
+    CLEAR_BIT(ADCx->JOFR3, ADC_JOFR3_JOFFSET3);
+    /* Reset register JOFR4 */
+    CLEAR_BIT(ADCx->JOFR4, ADC_JOFR4_JOFFSET4);
+    
+    /* Reset register HTR */
+    SET_BIT(ADCx->HTR, ADC_HTR_HT);
+    /* Reset register LTR */
+    CLEAR_BIT(ADCx->LTR, ADC_LTR_LT);
+    
+    /* Reset register SQR1 */
+    CLEAR_BIT(ADCx->SQR1,
+              (  ADC_SQR1_L
+               | ADC_SQR1_SQ16
+               | ADC_SQR1_SQ15 | ADC_SQR1_SQ14 | ADC_SQR1_SQ13)
+             );
+             
+    /* Reset register SQR2 */
+    CLEAR_BIT(ADCx->SQR2,
+              (  ADC_SQR2_SQ12 | ADC_SQR2_SQ11 | ADC_SQR2_SQ10
+               | ADC_SQR2_SQ9 | ADC_SQR2_SQ8 | ADC_SQR2_SQ7)
+             );
+
+    /* Reset register SQR3 */
+    CLEAR_BIT(ADCx->SQR3,
+              (  ADC_SQR3_SQ6 | ADC_SQR3_SQ5 | ADC_SQR3_SQ4
+               | ADC_SQR3_SQ3 | ADC_SQR3_SQ2 | ADC_SQR3_SQ1)
+             );
+
+    /* Reset register JSQR */
+    CLEAR_BIT(ADCx->JSQR,
+              (  ADC_JSQR_JL
+               | ADC_JSQR_JSQ4 | ADC_JSQR_JSQ3
+               | ADC_JSQR_JSQ2 | ADC_JSQR_JSQ1  )
+             );
+    
+    /* Reset register DR */
+    /* bits in access mode read only, no direct reset applicable */
+    
+    /* Reset registers JDR1, JDR2, JDR3, JDR4 */
+    /* bits in access mode read only, no direct reset applicable */
+    
+    /* Reset register CCR */
+    CLEAR_BIT(ADC->CCR, ADC_CCR_TSVREFE | ADC_CCR_ADCPRE);
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Initialize some features of ADC instance.
+  * @note   These parameters have an impact on ADC scope: ADC instance.
+  *         Affects both group regular and group injected (availability
+  *         of ADC group injected depends on STM32 families).
+  *         Refer to corresponding unitary functions into
+  *         @ref ADC_LL_EF_Configuration_ADC_Instance .
+  * @note   The setting of these parameters by function @ref LL_ADC_Init()
+  *         is conditioned to ADC state:
+  *         ADC instance must be disabled.
+  *         This condition is applied to all ADC features, for efficiency
+  *         and compatibility over all STM32 families. However, the different
+  *         features can be set under different ADC state conditions
+  *         (setting possible with ADC enabled without conversion on going,
+  *         ADC enabled with conversion on going, ...)
+  *         Each feature can be updated afterwards with a unitary function
+  *         and potentially with ADC in a different state than disabled,
+  *         refer to description of each function for setting
+  *         conditioned to ADC state.
+  * @note   After using this function, some other features must be configured
+  *         using LL unitary functions.
+  *         The minimum configuration remaining to be done is:
+  *          - Set ADC group regular or group injected sequencer:
+  *            map channel on the selected sequencer rank.
+  *            Refer to function @ref LL_ADC_REG_SetSequencerRanks().
+  *          - Set ADC channel sampling time
+  *            Refer to function LL_ADC_SetChannelSamplingTime();
+  * @param  ADCx ADC instance
+  * @param  ADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: ADC registers are initialized
+  *          - ERROR: ADC registers are not initialized
+  */
+ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct)
+{
+  ErrorStatus status = SUCCESS;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(ADCx));
+  
+  assert_param(IS_LL_ADC_RESOLUTION(ADC_InitStruct->Resolution));
+  assert_param(IS_LL_ADC_DATA_ALIGN(ADC_InitStruct->DataAlignment));
+  assert_param(IS_LL_ADC_SCAN_SELECTION(ADC_InitStruct->SequencersScanMode));
+  
+  /* Note: Hardware constraint (refer to description of this function):       */
+  /*       ADC instance must be disabled.                                     */
+  if(LL_ADC_IsEnabled(ADCx) == 0UL)
+  {
+    /* Configuration of ADC hierarchical scope:                               */
+    /*  - ADC instance                                                        */
+    /*    - Set ADC data resolution                                           */
+    /*    - Set ADC conversion data alignment                                 */
+    MODIFY_REG(ADCx->CR1,
+                 ADC_CR1_RES
+               | ADC_CR1_SCAN
+              ,
+                 ADC_InitStruct->Resolution
+               | ADC_InitStruct->SequencersScanMode
+              );
+    
+    MODIFY_REG(ADCx->CR2,
+                 ADC_CR2_ALIGN
+              ,
+                 ADC_InitStruct->DataAlignment
+              );
+
+  }
+  else
+  {
+    /* Initialization error: ADC instance is not disabled. */
+    status = ERROR;
+  }
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_ADC_InitTypeDef field to default value.
+  * @param  ADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure
+  *                        whose fields will be set to default values.
+  * @retval None
+  */
+void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct)
+{
+  /* Set ADC_InitStruct fields to default values */
+  /* Set fields of ADC instance */
+  ADC_InitStruct->Resolution    = LL_ADC_RESOLUTION_12B;
+  ADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT;
+  
+  /* Enable scan mode to have a generic behavior with ADC of other            */
+  /* STM32 families, without this setting available:                          */
+  /* ADC group regular sequencer and ADC group injected sequencer depend      */
+  /* only of their own configuration.                                         */
+  ADC_InitStruct->SequencersScanMode      = LL_ADC_SEQ_SCAN_ENABLE;
+  
+}
+
+/**
+  * @brief  Initialize some features of ADC group regular.
+  * @note   These parameters have an impact on ADC scope: ADC group regular.
+  *         Refer to corresponding unitary functions into
+  *         @ref ADC_LL_EF_Configuration_ADC_Group_Regular
+  *         (functions with prefix "REG").
+  * @note   The setting of these parameters by function @ref LL_ADC_Init()
+  *         is conditioned to ADC state:
+  *         ADC instance must be disabled.
+  *         This condition is applied to all ADC features, for efficiency
+  *         and compatibility over all STM32 families. However, the different
+  *         features can be set under different ADC state conditions
+  *         (setting possible with ADC enabled without conversion on going,
+  *         ADC enabled with conversion on going, ...)
+  *         Each feature can be updated afterwards with a unitary function
+  *         and potentially with ADC in a different state than disabled,
+  *         refer to description of each function for setting
+  *         conditioned to ADC state.
+  * @note   After using this function, other features must be configured
+  *         using LL unitary functions.
+  *         The minimum configuration remaining to be done is:
+  *          - Set ADC group regular or group injected sequencer:
+  *            map channel on the selected sequencer rank.
+  *            Refer to function @ref LL_ADC_REG_SetSequencerRanks().
+  *          - Set ADC channel sampling time
+  *            Refer to function LL_ADC_SetChannelSamplingTime();
+  * @param  ADCx ADC instance
+  * @param  ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: ADC registers are initialized
+  *          - ERROR: ADC registers are not initialized
+  */
+ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct)
+{
+  ErrorStatus status = SUCCESS;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(ADCx));
+  assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADC_REG_InitStruct->TriggerSource));
+  assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength));
+  if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
+  {
+    assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(ADC_REG_InitStruct->SequencerDiscont));
+  }
+  assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(ADC_REG_InitStruct->ContinuousMode));
+  assert_param(IS_LL_ADC_REG_DMA_TRANSFER(ADC_REG_InitStruct->DMATransfer));
+  
+  /* ADC group regular continuous mode and discontinuous mode                 */
+  /* can not be enabled simultenaeously                                       */
+  assert_param((ADC_REG_InitStruct->ContinuousMode == LL_ADC_REG_CONV_SINGLE)
+               || (ADC_REG_InitStruct->SequencerDiscont == LL_ADC_REG_SEQ_DISCONT_DISABLE));
+  
+  /* Note: Hardware constraint (refer to description of this function):       */
+  /*       ADC instance must be disabled.                                     */
+  if(LL_ADC_IsEnabled(ADCx) == 0UL)
+  {
+    /* Configuration of ADC hierarchical scope:                               */
+    /*  - ADC group regular                                                   */
+    /*    - Set ADC group regular trigger source                              */
+    /*    - Set ADC group regular sequencer length                            */
+    /*    - Set ADC group regular sequencer discontinuous mode                */
+    /*    - Set ADC group regular continuous mode                             */
+    /*    - Set ADC group regular conversion data transfer: no transfer or    */
+    /*      transfer by DMA, and DMA requests mode                            */
+    /* Note: On this STM32 series, ADC trigger edge is set when starting      */
+    /*       ADC conversion.                                                  */
+    /*       Refer to function @ref LL_ADC_REG_StartConversionExtTrig().      */
+    if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
+    {
+      MODIFY_REG(ADCx->CR1,
+                   ADC_CR1_DISCEN
+                 | ADC_CR1_DISCNUM
+                ,
+                   ADC_REG_InitStruct->SequencerDiscont
+                );
+    }
+    else
+    {
+      MODIFY_REG(ADCx->CR1,
+                   ADC_CR1_DISCEN
+                 | ADC_CR1_DISCNUM
+                ,
+                   LL_ADC_REG_SEQ_DISCONT_DISABLE
+                );
+    }
+    
+    MODIFY_REG(ADCx->CR2,
+                 ADC_CR2_EXTSEL
+               | ADC_CR2_EXTEN
+               | ADC_CR2_CONT
+               | ADC_CR2_DMA
+               | ADC_CR2_DDS
+              ,
+                (ADC_REG_InitStruct->TriggerSource & ADC_CR2_EXTSEL)
+               | ADC_REG_InitStruct->ContinuousMode
+               | ADC_REG_InitStruct->DMATransfer
+              );
+
+    /* Set ADC group regular sequencer length and scan direction */
+    /* Note: Hardware constraint (refer to description of this function):     */
+    /* Note: If ADC instance feature scan mode is disabled                    */
+    /*       (refer to  ADC instance initialization structure                 */
+    /*       parameter @ref SequencersScanMode                                */
+    /*       or function @ref LL_ADC_SetSequencersScanMode() ),               */
+    /*       this parameter is discarded.                                     */
+    LL_ADC_REG_SetSequencerLength(ADCx, ADC_REG_InitStruct->SequencerLength);
+  }
+  else
+  {
+    /* Initialization error: ADC instance is not disabled. */
+    status = ERROR;
+  }
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_ADC_REG_InitTypeDef field to default value.
+  * @param  ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
+  *                            whose fields will be set to default values.
+  * @retval None
+  */
+void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct)
+{
+  /* Set ADC_REG_InitStruct fields to default values */
+  /* Set fields of ADC group regular */
+  /* Note: On this STM32 series, ADC trigger edge is set when starting        */
+  /*       ADC conversion.                                                    */
+  /*       Refer to function @ref LL_ADC_REG_StartConversionExtTrig().        */
+  ADC_REG_InitStruct->TriggerSource    = LL_ADC_REG_TRIG_SOFTWARE;
+  ADC_REG_InitStruct->SequencerLength  = LL_ADC_REG_SEQ_SCAN_DISABLE;
+  ADC_REG_InitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE;
+  ADC_REG_InitStruct->ContinuousMode   = LL_ADC_REG_CONV_SINGLE;
+  ADC_REG_InitStruct->DMATransfer      = LL_ADC_REG_DMA_TRANSFER_NONE;
+}
+
+/**
+  * @brief  Initialize some features of ADC group injected.
+  * @note   These parameters have an impact on ADC scope: ADC group injected.
+  *         Refer to corresponding unitary functions into
+  *         @ref ADC_LL_EF_Configuration_ADC_Group_Regular
+  *         (functions with prefix "INJ").
+  * @note   The setting of these parameters by function @ref LL_ADC_Init()
+  *         is conditioned to ADC state:
+  *         ADC instance must be disabled.
+  *         This condition is applied to all ADC features, for efficiency
+  *         and compatibility over all STM32 families. However, the different
+  *         features can be set under different ADC state conditions
+  *         (setting possible with ADC enabled without conversion on going,
+  *         ADC enabled with conversion on going, ...)
+  *         Each feature can be updated afterwards with a unitary function
+  *         and potentially with ADC in a different state than disabled,
+  *         refer to description of each function for setting
+  *         conditioned to ADC state.
+  * @note   After using this function, other features must be configured
+  *         using LL unitary functions.
+  *         The minimum configuration remaining to be done is:
+  *          - Set ADC group injected sequencer:
+  *            map channel on the selected sequencer rank.
+  *            Refer to function @ref LL_ADC_INJ_SetSequencerRanks().
+  *          - Set ADC channel sampling time
+  *            Refer to function LL_ADC_SetChannelSamplingTime();
+  * @param  ADCx ADC instance
+  * @param  ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: ADC registers are initialized
+  *          - ERROR: ADC registers are not initialized
+  */
+ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct)
+{
+  ErrorStatus status = SUCCESS;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(ADCx));
+  assert_param(IS_LL_ADC_INJ_TRIG_SOURCE(ADC_INJ_InitStruct->TriggerSource));
+  assert_param(IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(ADC_INJ_InitStruct->SequencerLength));
+  if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_INJ_SEQ_SCAN_DISABLE)
+  {
+    assert_param(IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(ADC_INJ_InitStruct->SequencerDiscont));
+  }
+  assert_param(IS_LL_ADC_INJ_TRIG_AUTO(ADC_INJ_InitStruct->TrigAuto));
+  
+  /* Note: Hardware constraint (refer to description of this function):       */
+  /*       ADC instance must be disabled.                                     */
+  if(LL_ADC_IsEnabled(ADCx) == 0UL)
+  {
+    /* Configuration of ADC hierarchical scope:                               */
+    /*  - ADC group injected                                                  */
+    /*    - Set ADC group injected trigger source                             */
+    /*    - Set ADC group injected sequencer length                           */
+    /*    - Set ADC group injected sequencer discontinuous mode               */
+    /*    - Set ADC group injected conversion trigger: independent or         */
+    /*      from ADC group regular                                            */
+    /* Note: On this STM32 series, ADC trigger edge is set when starting      */
+    /*       ADC conversion.                                                  */
+    /*       Refer to function @ref LL_ADC_INJ_StartConversionExtTrig().      */
+    if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
+    {
+      MODIFY_REG(ADCx->CR1,
+                   ADC_CR1_JDISCEN
+                 | ADC_CR1_JAUTO
+                ,
+                   ADC_INJ_InitStruct->SequencerDiscont
+                 | ADC_INJ_InitStruct->TrigAuto
+                );
+    }
+    else
+    {
+      MODIFY_REG(ADCx->CR1,
+                   ADC_CR1_JDISCEN
+                 | ADC_CR1_JAUTO
+                ,
+                   LL_ADC_REG_SEQ_DISCONT_DISABLE
+                 | ADC_INJ_InitStruct->TrigAuto
+                );
+    }
+    
+    MODIFY_REG(ADCx->CR2,
+                 ADC_CR2_JEXTSEL
+               | ADC_CR2_JEXTEN
+              ,
+                (ADC_INJ_InitStruct->TriggerSource & ADC_CR2_JEXTSEL)
+              );
+    
+    /* Note: Hardware constraint (refer to description of this function):     */
+    /* Note: If ADC instance feature scan mode is disabled                    */
+    /*       (refer to  ADC instance initialization structure                 */
+    /*       parameter @ref SequencersScanMode                                */
+    /*       or function @ref LL_ADC_SetSequencersScanMode() ),               */
+    /*       this parameter is discarded.                                     */
+    LL_ADC_INJ_SetSequencerLength(ADCx, ADC_INJ_InitStruct->SequencerLength);
+  }
+  else
+  {
+    /* Initialization error: ADC instance is not disabled. */
+    status = ERROR;
+  }
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_ADC_INJ_InitTypeDef field to default value.
+  * @param  ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure
+  *                            whose fields will be set to default values.
+  * @retval None
+  */
+void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct)
+{
+  /* Set ADC_INJ_InitStruct fields to default values */
+  /* Set fields of ADC group injected */
+  ADC_INJ_InitStruct->TriggerSource    = LL_ADC_INJ_TRIG_SOFTWARE;
+  ADC_INJ_InitStruct->SequencerLength  = LL_ADC_INJ_SEQ_SCAN_DISABLE;
+  ADC_INJ_InitStruct->SequencerDiscont = LL_ADC_INJ_SEQ_DISCONT_DISABLE;
+  ADC_INJ_InitStruct->TrigAuto         = LL_ADC_INJ_TRIG_INDEPENDENT;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* ADC1 || ADC2 || ADC3 */
+
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+