Cult/Soft/tmp/tmp.ino

#include <OneWire.h>
#include <DS18B20.h>
#include <DS3231.h>
#include <Wire.h>

#define ONE_WIRE_BUS 3

const int ExtracteurPin = 2;
const int Rouge1Pin = 3;
const int Rouge2Pin = 4;

OneWire oneWire(ONE_WIRE_BUS);
DS18B20 sensor(&oneWire);
DS3231 Clock;


uint32_t start, stop;

void setup(){
  Serial.begin(9600);
  Wire.begin();
  pinMode(ExtracteurPin, OUTPUT);
  sensor.begin();
  sensor.setResolution(12);
}


void loop(){
  sensor.requestTemperatures();
  while (!sensor.isConversionComplete());
  float temp = sensor.getTempC();
  int minu = Clock.getMinute();
  bool h24,am;
  int heure = Clock.getHour(h24,am );
  Serial.println("salut");
  Serial.println(minu);
  Serial.println(temp);
  
  if (minu==0 | minu == 1 | minu == 15 | minu == 16 | minu == 30 | minu == 31 | minu == 45 | minu == 46 |temp >= 27)
    digitalWrite(ExtracteurPin,LOW);
  else
    digitalWrite(ExtracteurPin,HIGH);

  if(heure==10 | heure== 11 | heure== 12  | heure== 13 | heure== 14 | heure== 15 | heure== 16 | heure== 17 | heure== 18 | heure== 20  | heure== 21){
    digitalWrite(Rouge1Pin,LOW);
    digitalWrite(Rouge2Pin,LOW);  
  }
  else{
    digitalWrite(Rouge1Pin,HIGH);
    digitalWrite(Rouge2Pin,HIGH);
  }   
  delay(10000);
}