test V2

Soft/tmp/tmp.ino

@@ -4,44 +4,49 @@
 #include <DS3231.h>   //DS3231 by andrew wickert
 #include <Wire.h>
 
-#define ONE_WIRE_BUS 3
-
 //pin relay
-const int ExtracteurPin   = 2;
-const int Rouge1Pin       = 4;
-const int Rouge2Pin       = 5;
-const int Bleu1Pin        = 6;
-const int Bleu2Pin        = 7;
-const int Bleu3Pin        = 8;
-const int DehumPin        = 9;
+const int Rouge1Pin       = 3;
+const int Rouge2Pin       = 4;
+const int Bleu1Pin        = 5;
+const int Bleu2Pin        = 6;
+const int Bleu3Pin        = 7;
+const int DehumPin        = 8;
+const int VentilPin       = 9;
+const int ExtracteurPin   = 10;
+const int ArroFlo         = 11;
+const int ArroCroi        = 12;
+const int Evacuation      = 13;
 
 //pin inter
-const int inter1  = 22;
-const int inter2  = 23;
-const int inter3  = 24;
-const int inter4  = 25;
-const int inter5  = 26;
-const int inter6  = 27;
-const int inter7  = 28;
-const int inter8  = 29;
-const int inter9  = 30;
-const int inter10 = 31;
-const int inter11 = 32;
+const int inter1  = 22; //inter extinction lumiere
+const int inter2  = 24; //inter marche forcé ventilation
+const int inter3  = 26;
+const int inter4  = 28;
+const int inter5  = 30;
+const int inter6  = 32;
+const int inter7  = 34;
+const int inter8  = 36;
+const int inter9  = 38;
+const int inter10 = 40;
+
+//pin Capteur
+#define ONE_WIRE_TEMP 14
+// humide air 15
+const int HumidSolCro = 46;
+const int HumidSolFlo = 48;
+
 
 //Variable lumiere
-  int newDay = 1; // Variable pour savoir si nouveau jour.
-  int HAFlo;  //heure allumage floraison en minute (9H45 ou 10H15)
-  int HEFlo;  //heure extinction floraison en minute (HaFlo +12H +/-15min)
-  int HACro;  //heure allumage croissance en minute (4H45 ou 5H15)
-  int HECro;  //heure extinction croissance en minute (HaFlo +18H +/-15min)
-
-OneWire oneWire(ONE_WIRE_BUS);
-DS18B20 sensor(&oneWire);
+int newDay = 1; // Variable pour savoir si nouveau jour.
+int HAFlo;  //heure allumage floraison en minute (9H45 ou 10H15)
+int HEFlo;  //heure extinction floraison en minute (HaFlo +12H +/-15min)
+int HACro;  //heure allumage croissance en minute (4H45 ou 5H15)
+int HECro;  //heure extinction croissance en minute (HaFlo +18H +/-15min)
+
+OneWire oneWireTemp(ONE_WIRE_TEMP);
+DS18B20 Temp(&oneWireTemp);
 DS3231 Clock;
 
-
-uint32_t start, stop;
-
 void setup() {
   Serial.begin(9600);
 
@@ -50,33 +55,40 @@ void setup() {
                          init des pins
   * *********************************************************************
   */
-  pinMode(ExtracteurPin, OUTPUT);
+
   pinMode(Rouge1Pin, OUTPUT);
   pinMode(Rouge2Pin, OUTPUT);
   pinMode(Bleu1Pin, OUTPUT);
   pinMode(Bleu2Pin, OUTPUT);
+  pinMode(Bleu3Pin, OUTPUT);
   pinMode(DehumPin, OUTPUT);
+  pinMode(VentilPin, OUTPUT);
+  pinMode(ExtracteurPin, OUTPUT);
+  pinMode(ArroFlo, OUTPUT);
+  pinMode(ArroCroi, OUTPUT);
+  pinMode(Evacuation, OUTPUT);
 
-  pinMode(inter1, INPUT);   //inter extinction lumiere
+  pinMode(inter1, INPUT);   //extinction lumiere
   pinMode(inter2, INPUT);   //inter marche forcé ventilation
-  pinMode(inter3, INPUT);   //60%
-  pinMode(inter4, INPUT);   //70%
-  pinMode(inter5, INPUT);   //80%
-  pinMode(inter6, INPUT);   //croissance mere
-  pinMode(inter7, INPUT);   //croissance mere + serre
-  pinMode(inter8, INPUT);   //Arrosage1 on
-  pinMode(inter9, INPUT);   //Arrosage2 on
-  pinMode(inter10, INPUT);  //pompe vidange on
-  pinMode(inter11, INPUT);
+  pinMode(inter3, INPUT);   //60%/70%
+  pinMode(inter4, INPUT);   //croissance mere
+  pinMode(inter5, INPUT);
+  pinMode(inter6, INPUT);   //Arrosage1 on
+  pinMode(inter7, INPUT);   //Arrosage2 on
+  pinMode(inter8, INPUT);   //pompe vidange on
+  pinMode(inter9, INPUT);   //Arrosage flo auto
+  pinMode(inter10, INPUT);  //Arrosage Cro auto
+
+  pinMode(HumidSolCro, INPUT);
+  pinMode(HumidSolFlo, INPUT);
 
   /***********************************************************************
                          init des capteurs
   * *********************************************************************
   */
   Wire.begin();
-  sensor.begin();
-  sensor.setResolution(12);
-  delay(1000);
+  Temp.begin();
+  Temp.setResolution(12);
 }
 
 
@@ -87,20 +99,15 @@ void loop() {
   * *********************************************************************
   */
   //temperature
-  Serial.println("salut1");
-  sensor.requestTemperatures();
-  Serial.println("salut2");
-  while (!sensor.isConversionComplete());
-  Serial.println("salut3");
-  float temp = sensor.getTempC();
-  Serial.println(temp);
+  Temp.requestTemperatures();
+  while (!Temp.isConversionComplete());
+  float Temper = Temp.getTempC();
 
   //heure
   bool h24, am;
   int heure = Clock.getHour(h24, am );
   int minu = Clock.getMinute();
   int HMin = heure * 60 + minu; // heure en minute
-  Serial.println(HMin);
 
   //Hydrometrie
 
@@ -110,19 +117,12 @@ void loop() {
   */
 
 
-  if (newDay==1) {
+  if (newDay == 1) {
     newDay = 0;
-    Serial.println("newDay");
-    Serial.println(HMin);
     HAFlo = random (585, 615);
-    Serial.println(HAFlo);
     HEFlo = HAFlo + 705 + random(30);
-    Serial.println(HEFlo);
     HACro = random (285, 315);
-    Serial.println(HACro);
     HECro = HACro + 1065 + random(30);
-    Serial.println(HECro);
-    Serial.println("fin newDay");
   }
 
   if (HMin == 0)
@@ -131,12 +131,10 @@ void loop() {
   if (HMin >= HAFlo & HMin < HEFlo) {
     digitalWrite(Rouge1Pin, LOW);
     digitalWrite(Rouge2Pin, LOW);
-    Serial.println("Alum Flo");
   }
   else {
     digitalWrite(Rouge1Pin, HIGH);
     digitalWrite(Rouge2Pin, HIGH);
-    Serial.println("Ext Flo");
   }
 
   if (HMin >= HACro & HMin < HECro) {
@@ -155,7 +153,7 @@ void loop() {
                          Gestion de l'extraction
   * *********************************************************************
   */
-  if (minu == 0 | minu == 1 | temp >= 27)
+  if (minu == 0 | minu == 1 | Temper >= 27)
     digitalWrite(ExtracteurPin, LOW);
   else
     digitalWrite(ExtracteurPin, HIGH);